Key Responsibilities

1. Utilizes routine work orders, schematics, wiring diagrams, parts and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies and components.
2. Performs electro-mechanical assembly operations, troubleshooting and repair.  Identifies and corrects errors.
3. Observes all safety standards.  Maintains a secure, safe, clean and healthy work environment.  Attends required health and safety training and follows safety and security policies, procedures and practices.  Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept.  Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly.  Actively strives to prevent accidents and injuries.
4. Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components.  Enters data on computer terminal, such as progress, work expense and labor details.  May perform computer programming, repair or software 
5. Details finished work.  Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair.  Inspects parts for defects.  Troubleshoots and improves processes.

Functional Knowledge

• Has developed analytical skills and application of scientific methods to perform a variety of activities 

Business Expertise

• Has good understanding of how the team integrates with others

Leadership

• Has no supervisory responsibilities

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established operating procedures and/or scientific methods

Impact

• Impacts the quality of own work

Interpersonal Skills

• Uses communication skills to exchange of information 

Qualifications

Education:

Skills:

Certifications:

Languages:

Years of Experience:

Work Experience:

Additional Information

Time Type:

Employee Type:

Travel:

Relocation Eligible:

Applied Materials is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. 

Overview

Applied Materials New College Graduates (NCG) Program is a 16-month inter-department training program with the aim to nurture future leader for Applied’s Global Supply Chain organization. The NCG program consists of structured training modules providing learning opportunities through classroom trainings and interactions with experienced colleagues. The participants will rotate through positions in Purchasing, Sourcing, and Commodity Management, all while developing the technical and business skills required to be successful in the Supply Chain organization.

General Profile

Performs routine assignments in the entry level to a professional job progression. Typically has knowledge of and exposure to fundamental theories, principles and concepts. Develops competence by performing structured work assignments. Uses existing procedures to solve routine or standard problems. Receives instruction, guidance and direction from other team members.

Key Responsibilities

• Engages new supplier introduction and/or disengagement requirements to/from the Applied Materials supply base.

• Supports the maintenance of agreements with suppliers that provide the structure for all business relationships between Applied Materials and the supply base.

• Develops strategies to procure components at the lowest cost consistent with consideration of quality, reliability of source and urgency of need.

• Assists in creation of commodity road maps and implements commodity strategies.

• Supports new product development program and PLC process to ensure alignment with Applied’s commodity strategies.

• Drives material cost reduction projects. Activities include but not limited to supplier negotiations, collaboration with engineering on design optimization and should costing.

• Assists in supplier price and delivery negotiations; under direct supervision may negotiate contracts as necessary.

• Utilizes the preferred supplier selection and assessment process when selecting suppliers; Completes supplier risk assessment on critical and unique parts; Monitors supplier performance (delivery, quality, cost).

• Drives resolution to systematic supply chain issues affecting quality, cost, delivery or lead-time.

• Drives initiatives on process improvement, optimization and digitalization of work processes within GSC community.

• Under direct supervision, forecasts and communicates engineering, materials, and manufacturing requirements to suppliers. Coordinates demand signals through MRP to minimize inventory exposure.

• Review and resolve material shortages to ensure continuity of production activities.

• Provides input to outsourcing decisions by performing make versus buy analysis.

Requirements

• Graduating with a Bachelor’s degree in Supply Chain, Engineering, Business Management, Data Analytics or related field

• Proficiency in developing effective executive reports and presentations

• Proficiency in Microsoft office tools

• Excellent listening, writing, quantitative, qualitative and oral communication skills

• Strong interpersonal skills with the ability to interact cross-organizationally

• Ability to problem-solve creatively and analytically

• Detail-oriented; ability to multi-task; deadline-oriented

• Flexible and adaptable mindset

• Thrive in a results-driven culture

Qualifications

Education:

Skills:

Certifications:

Languages:

Years of Experience:

Work Experience:

Additional Information

Time Type:

Employee Type:

Travel:

Relocation Eligible:

Applied Materials is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. 

Overview

Applied Materials New College Graduates (NCG) Program is a 16-month inter-department training program with the aim to nurture future leader for Applied’s Global Supply Chain organization. The NCG program consists of structured training modules providing learning opportunities through classroom trainings and interactions with experienced colleagues. The participants will rotate through positions in Purchasing, Sourcing, and Commodity Management, all while developing the technical and business skills required to be successful in the Supply Chain organization.

General Profile

Performs routine assignments in the entry level to a professional job progression. Typically has knowledge of and exposure to fundamental theories, principles and concepts. Develops competence by performing structured work assignments. Uses existing procedures to solve routine or standard problems. Receives instruction, guidance and direction from other team members.

Key Responsibilities

• Engages new supplier introduction and/or disengagement requirements to/from the Applied Materials supply base.

• Supports the maintenance of agreements with suppliers that provide the structure for all business relationships between Applied Materials and the supply base.

• Develops strategies to procure components at the lowest cost consistent with consideration of quality, reliability of source and urgency of need.

• Assists in creation of commodity road maps and implements commodity strategies.

• Supports new product development program and PLC process to ensure alignment with Applied’s commodity strategies.

• Drives material cost reduction projects. Activities include but not limited to supplier negotiations, collaboration with engineering on design optimization and should costing.

• Assists in supplier price and delivery negotiations; under direct supervision may negotiate contracts as necessary.

• Utilizes the preferred supplier selection and assessment process when selecting suppliers; Completes supplier risk assessment on critical and unique parts; Monitors supplier performance (delivery, quality, cost).

• Drives resolution to systematic supply chain issues affecting quality, cost, delivery or lead-time.

• Drives initiatives on process improvement, optimization and digitalization of work processes within GSC community.

• Under direct supervision, forecasts and communicates engineering, materials, and manufacturing requirements to suppliers. Coordinates demand signals through MRP to minimize inventory exposure.

• Review and resolve material shortages to ensure continuity of production activities.

• Provides input to outsourcing decisions by performing make versus buy analysis.

Requirements

• Graduating with a Bachelor’s degree in Supply Chain, Engineering, Business Management, Data Analytics or related field

• Proficiency in developing effective executive reports and presentations

• Proficiency in Microsoft office tools

• Excellent listening, writing, quantitative, qualitative and oral communication skills

• Strong interpersonal skills with the ability to interact cross-organizationally

• Ability to problem-solve creatively and analytically

• Detail-oriented; ability to multi-task; deadline-oriented

• Flexible and adaptable mindset

• Thrive in a results-driven culture

Qualifications

Education:

Skills:

Certifications:

Languages:

Years of Experience:

Work Experience:

Additional Information

Time Type:

Employee Type:

Travel:

Relocation Eligible:

Applied Materials is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. 

Job Descriptions:

• Fully Remote working / Work from home.
• Flexible working hours.

Roles & Responsibilities:

• Reesponsible for Business Development.
• Meet monthly sales target.
• Manage general administrative documentation for Migrant Domestic & Foreign Workers Application.
• Ensure understanding and compliance with relevant regulations governing Migrant Domestic & Foreign Workers.
• Source, interview, select, and screen potential Migrant Domestic & Foreign Workers through a rigorous vetting process during interviews.
• Address employer inquiries, comprehend their requirements, and assist in matching them with suitable Migrant Domestic or Foreign Workers.
• Conduct home visits or telephone calls to employers and Migrant Domestic or Foreign Workers post-placement as part of after-sales service.
• Provide counseling to helpers and assist in mediation when required.

Requirements:

• Minimum 1 year of proven track records in handling the workflow of Foreign Workers (FW) and Migrant Domestic Workers (MDW) employment processes.
• Possess CEI certification.
• Singaporeans/Permanent Residents preferred.
• Good communication and interpersonal skills.
• Ability to work independently.
• Confidence, sales-driven, and results-oriented.
• Proficient in MS Word and PDF; familiarity with communication tools like WhatsApp and computer applications such as Zoom, web browsers, etc., is a must.

How to Aapply:

Interested applicants, please send your detailed resume with expected salary to: [email protected]

(We regret that only shortlisted candidates will be notified)

114 Solutions Pte. Ltd.

EA Licence No: 23C1827

Consultant: Mohamed Faishal Bin Mohamed Ibrahim

EA Personnel Reg. No: R23118282

Job Description:

Required skill(s): - Adminstrative skills

- Full set of Accounts (eg: GL, AP, AR, Bank reconciliation, Payroll & etc)

- GST reporting & filing

- Tax computation

- HR, payroll processing, IR8A filing, others related of HR matters

Requirement:

- Degree of Accountancy

- At least 2 year(s) of working experience in the related field is required for this position.

- Preferable with knowledge of Accounting System

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

- Work experience and job responsibilities

- Current and expected salary

- Reason for leaving

- Date of availability

- Education background

- Able to commence work immediate/short notice

Job Responsibilities

- Provide advice to internal stakeholders on all procurement-related matters and ensure they are compliant with Company Procurement Policy.

- Perform vendor screening, supply market research and analytical studies to identify and select potential suppliers to be added to the pre-approved vendor list.

- Prepare RFQ/Tender documents

- Review and evaluate quotations from vendor

- Coordinate purchasing activities and services based on company’s needs.

- Monitor process and supplier performance and resolve issues with suppliers.

- Manage and analyze expense data with the objective to derive cost saving opportunities.

- Monitor contracts and renewal prior to expiry

- Any other duties assigned by manager

Requirements

- Min 3 years of relevant experience in the F&B industry

- Knowledge of MS Office (Google Drive)

- A positive work attitude and willingness to learn and contribute

- Good interpersonal and communication skills

- Self-driven and highly-motivated

- High degree of commitment and a good team player

- Able to work under pressure and in a fast-paced environment

- Have initiative, independent and well-organised

Job Title: Process Engineer ( IC )

Salary: Up to $3500

Location: Tuas

Working Days:Mon-Fri

Working Hours: 7.50 am to 4.55 pm

Benefits: Company transport provided, Medical insurance, and Dental coverage

Job Duties:

• Assist in carrying out MBO activities to meet department KPIs in line with Business Plan and Division Objectives
• Assist in process improvement for Yield, Quality, and Productivity
• Support the team involved in QA and Production to resolve production line trouble
• Perform data collection to generate technical reports for customer product qualification and confirmation
• Assist in problem analysis to resolve production line trouble in their assigned processes
• Participate in daily meetings, weekly meeting and providing two ways for information sharing, and seek help from the supervisors if necessary
• Assist Engineer in process development activities and optimization parameters by conducting DOE and analysis
• Support prototype-related activities, New Products, New Packages, New Process,es and New substrate or Lead frame introduction
• Assist or wrote technical reports for customer product qualification, process evaluation, and DOE conducted
• Perform any other related duties assigned by the Supervisor

Job Requirements:

• Diploma in Electrical/Electronics/Mechanical Engineering or related discipline
• Experience in semiconductor or IC package assembly is preferred
• Willing to learn new equipment or processes
• Able to support shift work when needed.

WONG MENG KANG

Superform Consulting Pte Ltd

R1988500 / 15C7536

Job Responsibilities

- In-house design for company’s collateral

- Content creation for social media platforms such as Facebook, Instagram, YouTube


- Maintain company’s objective by generating inbound leads via Facebook Ads, Google Ads (Paid and Organic)
 - Photography cum videography required at job sites for completed projects, followed by photo/video editing/production for content


- To handle online marketing eg Facebook, Instagram, and company website


- Responsible to assist in marketing planning and execution

Requirements:

- Knowledge in Adobe Photoshop / Illustrator / Canva

- Knowledge in social media marketing skills

Job Responsibilities

- Manage and lead procurement activities for supplies and services from vendors.

- Lead the competitive sourcing process, initiate requests for information/Quotation/Proposal, negotiate commercial terms.

- Execute all contractual matters of assigned projects and ensure that they are dealt with effectively.

- Monitor and analysis trends in spending and inventory control and make recommendations to identify areas for saving.

- Other adhoc matters assigned by the Management.

Requirements

- Min 3 years of relevant experience

- Has experience in managerial role, preferably in the F&B industry

- Good leadership and people management

- Knowledge of MS Office (Google Drive)

- A positive work attitude and willingness to learn and contribute

- Good interpersonal and communication skills

- Self-driven and highly-motivated

- High degree of commitment and a good team player

- Able to work under pressure and in a fast-paced environment

- Have initiative, independent and well-organised

The Project Manager oversees the planning and all project operations. He/She manages the progress of the project and ensures quality and timely delivery. The Project Manager will be required to travel to project sites. Good communication skills are needed to liaise with the various stakeholders.

Planning and monitoring the project. adopting any delegation and use of project assurance roles within agreed reporting structures. preparing and maintaining project, stage and exception plans as required. managing project risks, including the development of contingency plans.

• Plan and Develop the Project Idea. Every project starts as an idea. ...
• Create and Lead Your Dream Team. ...
• Monitor Project Progress and Set Deadlines. ...
• Solve Issues That Arise. ...
• Manage the Money. ...
• Ensure Stakeholder Satisfaction. ...
• Evaluate Project Performance.

• Familiar with evaluation of tenders, preparation of tender and quotation.

• Responsible for taking off measurement and monthly progress claim.

• Ability to source for supplies and sub-contractors for quotation for tendering.

• Project administration and documentation include preparation of interim.

• Review and advise the Project Manager on the cost impact for variation of project specification.

• Minimum Diploma in Quantity Surveying or a related field.

• At least 2 years of working experience in the related field is required for this position.

• Well-versed in English and Mandarin.

Job Responsibilities

-Responsible for reviewing of lease documents, contracts, and tenancy schedule prepared by the team.

-Collate and prepare monthly management reports for submission.

-Responsible for audit checks on leases and tenants, arrears management, tenant and other related lease management functions.

-Oversee arrears management process to ensure arrears ratio is low, prepare arrears report on a regular interval and present the recovery plan for delinquent cases.

-Supervise the team in the tracking security deposit, monitor submission of gross sales turnover reports and audited sales reports by tenants and adjustment of audited sales.

-Ensure accurate and timely submission of gross sales turnover reports and detailed analysis of rental, gross sales turnover and occupancy cost.

-Develop and maintain cordial relationships with tenants and attend to all feedbacks/requests promptly.

-Coordinate and liaise with both internal and external parties

-Perform any ad hoc duties as assigned by leasing manager and management

Requirements

- A positive work attitude and willingness to learn

- Good interpersonal and communication skills

- Self-driven and highly-motivated

- Able to work under pressure and in a fast-paced environment

- Have initiative, independent and well-organised

- Enjoy communicating with people

Job Responsibilities

- Oversee financial planning and business performance analysis, including budgeting, forecasting, cash flow, investment and risk management activities.

- You will ensure the accuracy of financial statements and adhere to corporate reporting timetables. You will also assist in implementation of management and administrative financial systems to provide structure for sustained business growth.

- To ensure compliance with established financial processes, local compliance requirements, financial reporting and review of revenue, expenditures, asset management, tax, management reporting and administration.

- You will be responsible for the implementation of finance strategies and objectives. You will manage and liaise with external auditors and tax agents.

-You must possess the knowledge to evaluate the company's P&L and also plan for effective finance strategies.

Requirements

- Prior experience from the F&B industry is an advantage.

- Have a strong understanding in inventory management and costing.

- Possess strong communication and presentation skills.

Job Responsibilities

- Handle full set of accounts and ensure timely closing

- Provide management reports monthly & yearly & Audit Schedule to Finance Manager

- Prepare/Review quarterly GST submission

- Ensure inter-company transactions tally among multi-companies

- Prepare monthly bank reconciliation

- Ensure all filing is done in a timely and accurate manner

- Making sure compliance with all legislative tax & financial reporting policies and requirements

- Perform any other duties as assigned by the management

- Liaise with external auditor

Requirements

- Software skills: Advanced MS Excel, word & Million software preferably

- Good communication skills in Mandarin and English

- Positive working attitude

Job Responsibilities

- Manage and lead procurement activities for supplies and services from vendors.

- Lead the competitive sourcing process, initiate requests for information/Quotation/Proposal, negotiate commercial terms.

- Execute all contractual matters of assigned projects and ensure that they are dealt with effectively.

- Monitor and analysis trends in spending and inventory control and make recommendations to identify areas for saving.

- Other adhoc matters assigned by the Management.

Requirements

- Min 3 years of relevant experience

- Has experience in managerial role, preferably in the F&B industry

- Good leadership and people management

- Knowledge of MS Office (Google Drive)

- A positive work attitude and willingness to learn and contribute

- Good interpersonal and communication skills

- Self-driven and highly-motivated

- High degree of commitment and a good team player

- Able to work under pressure and in a fast-paced environment

- Have initiative, independent and well-organised

Job Description

The Project Consultant manages the execution of construction operations and validates the construction, installation, assembly of components, equipment, systems, and completion of activities. The candidate also assesses compliance with the relevant regulatory and legislative requirements. The candidate is meticulous and highly detail-orientated and possesses strong communication, problem-solving, and interpersonal skills to facilitate stakeholder management and works on-site.

Key Responsibilities

Individual to be involved in:

1. Manage and oversee the project team including external project managers, design consultants, and contractors to meet their deliverables, to an adequate standard, on time, and not compromise the project specifications

2. Manage relevant parties to ensure project progress adheres to the schedule.

3. Monitor compliance of work with the safety and health regulations.

4. Develop, track, and update a realistic and achievable programme of works and delivery approach at the earliest possible stages of the projects.

5. Proactively ensure all commercial, contractual, and procurement activities on the projects are managed in a timely and transparent manner and avoid any cost and time risk to the Projects.

6. Identify all statutory approvals needed and thereafter manage and achieve as scheduled to avoid any delay to the projects.

7. Other project management duties assigned

Technical Skills & Competencies

1. Lead, direct, oversee, manage, and intervene as necessary with all internal and external project stakeholders.

2. Review, implement and oversee all projects with clients and manage the facilitation between developers and marketers with client.

3. Communicate effectively and regularly with all project stakeholders – upstream and downstream on relevant topics.

4. Closely monitor, manage, and report on project budgets.

Job Summary

The Manager, Account Operations will be responsible for developing, maintaining and expanding relationships with customers. Provide dedicated product or commodity support to UCT manufacturing sites and customer. This position requires a versatile and driven individual with broad business acumen and excellent verbal/written communication skills. Manage projects/orders using customer perspective, typically from initiation through delivery. Coordinate and adept with cross-cultural business relationships and flexible hours dictated by international business. Manage progress measurement activities for specific projects to completion both on time and within tolerable risk levels to both UCT and customer.

Essential Duties And Responsibilities

• Works closely with CBO team and attend regular production meetings to manage customer expectations and escalations.
• Lead and participate in cross functional teams to identify delivery risk to customer
• Develop and monitor risk mitigation strategies, and coordinate root cause corrective actions
• Lead and participate in projects to resolve problems or to support continuous process improvement
• Develop timely reports and key performance indicators to identify/monitor material delivery challenges
• Ability to analyze and utilize data in decision making, achievement of business objectives, and driving best quality solutions, practices and policies. Ability to work on a large set of issues and projects at the same time
• Escalate gaps and unattended risks and issues until resolved
• Responsible for defining, developing, and commercializing new projects (customers / applications) within the segment / application strategy, the ambition of the product line and focal points within segment and application.
• Responsible for leveraging and coordinating efforts for his/her projects at the account level.
• Responsible for positioning new value propositions at his/her target accounts for commercial development and for communicating value propositions to the market.
• Develop relationship map of key organizations in the value chain, increasing coverage/ networks within the accounts’ organizations focusing on engineering, technology, id and sales.
• Responsible for providing sales forecasting monthly or as required
• Communicate via written and verbal reports weekly and monthly on progress and issues at Account with recommendations as to next steps needed at the account.

Knowledge, Skills And Abilities

• Ability to lead without having the authority
• Sense of urgency
• Process orientated
• Effective communicator within all levels of the organization (internal / external)
• High level of emotional intelligence
• Strong operational acumen
• Analytical thinker for problem solving
• Execution excellence & accountability
• Demonstrated persistence and tenacity
• Ability to prioritize projects and respond to customer needs
• Experience in a matrix organization, experience working with colleagues.
• Skills, experience and training in product management and finance; and additional background in sales, technical service, and application development.
• Strong verbal and written communication skills
• Strong Excel and PowerPoint skills

Educational/Certification Requirement

• BS in Business, engineering or equivalent
• MBA preferred

Experience Requirement

• Minimum 8 years relevant experience in the field of sales, account management and/or business development.
• Minimum of 8 years’ experience in a manufacturing environment
• Experience leading cross functional teams
• Ability & willingness to work at all levels of the organization to get the job done.
• Analytical, with good judgment, business sense, and problem solving skills.
• A strong negotiator who is able to identify customer’s needs and persuasive in presenting ideas.
• A team player, able to work interdependently

Business Travel

• Willing and able to travel Internationally to support customer meetings, training and internal meetings, as required

At Ultra Clean Technology, we do not just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Roles & Responsibilities

a.Edit pictures, market, promote and inventory stock updates, stock ordering, prepare and arrange delivery, answer customers, etc.

b.Packing and order fulfillment on orders received.

c.Stock checking and warehouse inventory management.

d. General day-to-day administrative duties.

• AUTO CAD Drafting for building & Steel Plate NESTING
• Have a good knowledge in CAD MATIC.
• Preparing Engineering Drawings and steel weight checking.
• QA / QC Document controller.
• Have a good knowledge in M.S OFFICE.
• Material taking off for fabrication.(MTO)
• -Preparing Dimensional Reports

• Checking and inspecting the quality of works during construction.

• Checking actual construction according to drawings and specifications.

• Coordinate with the clients for whatever revision on drawings and in

actual Construction and Submit weekly site works progress report to

the client.

• Project Planning.

• Materials and Resources Forecasting and Procurement process.

• Execution of the Entire Building’s Structures and Finishes with Project

Team for smoothing the work progress.

.Office Administrator works

Job Title: Logistics Supervisor

Salary: Up to $3500

Location: Tuas

Working Days: Mon - Fri

Working Hours: 7.50 am to 4.55 pm

Benefits: Company transport provided, Medical insurance, and Dental coverage

Job Responsibilities:

• Oversee and coordinate daily warehouse operations.
• Manage import/export logistics operations to ensure smooth goods flow.
• Liaise and negotiate with forwarders and couriers.
• Provide operational support, training, and guidance to subordinates.
• Analyze and report logistics costs & forwarder services to drive for optimization of transportation solutions.
• Support in annual forwarder selection program and Budget/Forecast data making.
• Drive continuous improvement activities.
• Ensure compliance with various company policies and regulations.

Requirements:

• Diploma in Logistics & Supply Chain with 2-3 years of working experience in a manufacturing environment.
• Team Player / Independent / Initiative.
• Good time management and able to multi-task
• Demonstrable ability to lead and manage subordinates.
• Good analytical, problem solving and organizational skills.
• Proficient in standard logistics terms and compliance requirements.

WONG MENG KANG

Superform Consulting Pte Ltd

R1988500 / 15C7536

Job Scope:

- Handle full set of accounts and ensure timely closing

- Provide management reports monthly & yearly & Audit Schedule to Finance Manager

- Handle Costing Reports of all outlets monthly and other reports if requested

- Ensure inter-company transactions tally among multi-companies

- Prepare/Review quarterly GST submission

- Ensure all filing is done in a timely and accurate manner

- Making sure compliance with all legislative tax & financial reporting policies and requirements

- Perform any other duties as assigned by the management - Liaise with external auditor

Requirements:

- Minimum Diploma in accountancy

- At least 4 years of handling full set account’s working experience, preferably F&B

- Software skills: Advanced MS Excel, word & Million software preferably

- Good communication skills in Mandarin and English

- Positive working attitude

• Taking off measurement and prepare quotation Cost breakdown and calculating material on site.
• Assist Operation Manager in work planning, scheduling, and manpower arrangement
• Liaise with suppliers, subcontractors and main contractors for work coordination
• Attend site meeting / technical meeting
• To Prepare monthly progress claims to main-contractor and verification of sub-contractor progress claims.
• To coordinate with Client representatives for resolving day to day site discrepancies

Job Responsibilities

- In-house design for company’s collateral

- Content creation for social media platforms such as Facebook, Instagram, YouTube


- Maintain company’s objective by generating inbound leads via Facebook Ads, Google Ads (Paid and Organic)


- Photography cum videography required at job sites for completed projects, followed by photo/video editing/production for content


- To handle online marketing eg Facebook, Instagram, and company website


- Responsible to assist in marketing planning and execution

Requirements:

- Knowledge in Adobe Photoshop / Illustrator / Canva

- Knowledge in social media marketing skills

• Overseeing full spectrum of HR activities including talent acquisition, management and retention, performance management, training and development, compensation and welfare, HR budgeting and payroll, statutory/regulatory reporting, employee work pass matters;
• Provide day-to-day support of HR operations;
• Review, upgrade, and develop HR policies to support the business as it grows;
• Partnering with management and work independently to deliver impactful HR/people initiatives and employee engagement to drive retention of the team and support growth;
• Document management - contracts, agreements, HR-related employee letters, work permits, etc;
• Manage payroll and administer Compensation and Benefits of employees;
• Keeping abreast of, and implementing where appropriate, employment legislation and HR best practices.

Job Summary

The successful candidate will be responsible for the creation of tooling concepts and the design of plastic Injection molds, detailing high-performance molds in 3D.

Responsibilities

• Design projects from concept thru final details
• Interacting with customers – conference calls to on-site design reviews
• Working with the shop to distribute and communicate the requirements of the project
• Participate in the First-Off Tool review and assess the suitability of the tool for production
• Report to upper management
• Identify technical risks and define mitigation plan
• Travel internationally to customer or supplier sites as projects require
• Resolving out-of-spec issues
• Be required to mentor and develop junior engineers as necessary
• Perform other duties as assigned

Requirement

• Diploma in Precision Engineering, Mechanical, Manufacturing and/or any relevant engineering discipline with 7 years of relevant working experience
• Expertise in 3D modeling and knowledge in GD&T
• Experience in with evaluating and analysing tooling issue
• Proficient in AutoCAD and Unigraphics
• Familiar with Design for Manufacture (DFM) who able to develop complex designs to the point of manufacture and release to production
• Knowing the manufacturing processes and has the knowledge in plastics and elastomers
• Experience in unscrewing, multi-shot, stack and high tolerance moulds, including mechanical design
• Proficient in Microsoft Office applications
• Excellent organizational and communication skills, including effective presentation of complex data
• Good leadership skills and a team player
• Flexible attitude towards work and eager to learn new skills
• Must be willing to work overtime as required