• Work with manager and other mechanics to diagnose and repair the mechanical and electrical components of vehicles.
• Listening to clients to learn more about vehicle history, potential problems, and the services they would like to receive.
• Repaire all type of construction machinery
• Performing test drivers, inspections, and other diagnostic tests on vehicles to identify where problems exists and determine which parts need to be repaired or replaced.
• Completing preventative maintenance on vehicles, such as performing oil changes,flushing and replacing fluids, and replacing brakes.
• Repairing damage to the body of the vehicle and washing and painting the vehicle’s exterior
• Inspecting internal systems and controls to ensure the vehicle is operating properly and in compliance with state regulations
• Maintaining accurate records relating to clients, their vehicles, parts, and service history.
• Using shop equipment as instructed, performing regular maintenance and repairs as needed.
• Engaging in learning opportunities to update job knowledge and technical skill
• Complete assigned jobs on time with good workmanship.
• Able to work with deadlines.
• Experience with different vehicle brands and models is advantages.

Requirements:

• High School or equivalent.
• Addition education, certifications, or experience is generally preferred.
• Proven ability to diagnose and repair vehicles and follow safety instructions and directions.
• Proficiency with hand tools and other equipment.
• Excellent active listening, problem solving, and communication skills.
• Self-motivated, independent, and reliable with a strong work ethic

Installation, servicing, troubleshoot and repair Refrigeration and Air-con system onboard vessel. With class 3 driving license. Able to work hard, communicate from customer to company, able to work independently and also with team, work under minimum supervision, understanding electrical control system for Refrigeration and air conditioning is prefer. Able to write work reports

* This is a 3 months Contract role (subject to extension/conversion) *

Key Responsibilities:

• Attend to daily facility preventive/corrective maintenance work
• Able to perform electrical work on lightings and auto doors
• Able to perform labour work such as roof top cleaning, drain cleaning, wall painting and minor wall plastering work.
• Ensure all practices are safe according to safety practices.

Job Requirements:

• Candidate should possess at least a NTC 3/ NITEC certification in Electrical, Mechanical or Facility Technology.
• Basic knowledge on plumbing, fire alarm system and air con system.
• Preferably to have scissor lift, boom lift and forklift licence.

DELO Industrial Adhesives, a successful, international and innovative company, is hiring. Known in Europe as an award-winning employer at the cutting edge of technology, DELO is specialized in technical applications of high-tech bonding techniques in the growing markets of opto-electronics, consumer electronics, RFID, automotive, photo-voltaic, aerospace, and engineering. Our customers include well-known companies such as Huawei, Daimler, Bosch and Sony. An important reason for our customer loyalty is the personalized expertise from our field specialists. Thanks to the know-how and commitment of 1000 employees, DELO has a continuous growth record for the last few decades.

In order to support our subsidiary in Singapore, we are looking for an Service Technician Singapore.

Your tasks

Ø Attend to customer visits, equipment inquiries, commissioning, and post-sales service support (both remote and onsite)

Ø Prepare and document visit reports and test results

Ø Plan, coordinate, and conduct equipment training and equipment demonstrations (onsite)

Ø Support the maintenance of the long-term equipment loan pool at subsidiaries in Malaysia and Thailand

Ø Support Sales Managers and distributors onsite

Ø Engage in frequent travel (at least 50%) to support equipment activities in Southeast Asia, including India

Ø Work closely with colleagues from Engineering, Product Management, and Sales

Ø Assist in equipment lab trials, equipment repairs, and equipment loan management when not traveling (as a backup)

Job benefits

Ø Minimum diploma in Mechanical or Electrical Engineering, Mechatronics, or a similar field

Ø Enjoy working with customers and be willing to travel (at least 50%)

Ø Strong analytical and organizational skills

Ø Positive attitude towards learning new technology and handling projects

Ø Good command of written and spoken English

Ø Responsible, motivated, and a good team player

Ø Proficient in Microsoft Office applications

Your place of work

DELO Industrial Adhesives (Singapore) Pte Ltd
German Centre Singapore: #04-15/19
25 International Business Park
Singapore 609916
SINGAPORE

If you are interested in the position, please send your application to [email protected] including, salary expectations.

T & C Manufacturing is looking for candidates with the following pre-requisites:

• Min. GCE "O" Level (chemistry and biology).
• Some Knowledge and experience in laboratory work.

Job Descriptions as follows:

1. To perform sensory evaluation, chemical and microbiological analysis on products and raw materials.
2. Understand sampling plan and methods of sampling and carry out raw materials and products sampling according to sampling plan if necessary.
3. Preparation of laboratory culture media and reagents when necessary
4. Prepare product sample upon request by customers or for internal and external lab testing
5. To record all information required into the provided inspection form and master list.
6. Maintain good housekeeping of the lab and equipments.
7. To inform QC HOD on lab inventory status to purchase necessary items and equipments for analysis.
8. Report to HOD if any non-conformances found on raw materials and products.
9. Keeping retained raw material product sample according to production date for future reference in case any quality dispute from customers.
10. To participate in company level activity task and duty from time to time.

JOB RESPONSIBILITY

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Reading repair manuals and liaising with other professionals.
• Running tests and interpreting results to make effective recommendations.
• Writing up reports, safety regulations, and preventative maintenance plans.
• Sourcing replacement parts.
• Negotiating with suppliers and clients.
• Repairing or replacing faulty equipment.
• Fabricating any components required.
• Providing time and material cost estimates before starting a job.
• Keeping abreast of advancements in your field and attending workshops as required.

JOB REQUIREMENT

• Proven experience as technician or relevant role
• Basic understanding of electrical, hydraulic and other systems
• Knowledge of general maintenance processes and methods
• Working knowledge of tools, common appliances and devices
• Willingness to work overtime and work on public holiday

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

• To interpret technical drawing and performing machining process and requirement to produce the work piece.
• To perform machine code programming with 3D modelling with Fanuc .
• To operate, set up parts and producing parts as per drawing specification.
• Guiding and providing operator/machinist with basic instruction in operating the machines.

• Reading and interpreting technical blueprints and design models
• Good proficiency in CNC/ CAD CAM Programming.
• Hands on experience in Mastercam
• Having similar experience in Precision parts programming
• Well versed in CADCAM, preferrence in Mastercam 2D and 3D programming
• Has experience in using DelCam
• Preferably CNC Milling/Turning Machine background

• Review existing processes and establish the best machining processes.
• Identify problems in the production processes and implement preventive/corrective actions.
• Able to work together with workers engaged in production process to make sure the productions runs smoothly, produce the right part, in the right quality, quantity and at the right time.
• Assist with costing and quotation process

Job Scope:
• Program CNC machines using Mastercam software and set up/running of CNC machines.
• Plan, monitor, and execute machining jobs to meet project master plans, ensuring quality and timely delivery.
• Coordinate with other departments regarding machining job requirements.
• Perform additional tasks as assigned by the Superior or Operations Manager.

• Proficient in the use of micrometers, calipers, dial indicators and other standard machine shop measuring devices.
• Create and adjust CAD files. Collaborates with Engineering regarding design enhancements for cost improvements.
• Associates degree in Machine Tool field is desirable in order to choose the appropriate tool that will be needed.
• Analyses and determines the most effective material size for production and recommends alternative materials to engineering when appropriate.

Candidates must have electrical & electronics background with at least 1 year related work experience. You should have good knowledge in electronic equipment repair and able to conduct bench-test and trouble-shooting. Experience in crane industries will be an added advantage.

Requirements / Responsibilities: :

- At least 1 year related working experience.

- ITE in Electrical/Electronics and above

- Must possess class 3 driving license

- Strong troubleshooting and analytical skills to resolve technical problems.

- May require to perform equipment installation on site either local or overseas

- Assist in updating the inventory, up-keep the service centre cum warehouse, prepare quotations and delivery.

- PC literate, ability to read technical drawings/procedures and use a variety testing and measuring instruments.

- Willing to sign contract for at least 2 years as overseas training is required.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Ensure safe and optimal operation of process units
• Ensure workplace safety by proper asset upkeep, supporting function testing on safeguarding system and proper control on work activities in the plant
• Participate in plant shutdown & start-up and process unit troubleshooting work activities

• Diploma or NITEC in Chemical Process Technology (Petrochemicals or Pharmaceuticals) OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE / Polytechnic engineering graduates are welcome to apply as training will be provided

Job Description & Requirements

1. Assembly of higher end products which require self-interpretation and understanding of technical drawing, assembly requirements, which also includes Geometric Dimensioning and Tolerance
2. Electrical wiring and soldering for installation and assembling of mechanical and sub-assembly level components.
3. Troubleshooting of machinery, servicing and maintenance.
4. Perform testing and commissioning of machines and testers.
5. Providing smooth and continuous running and support on machines and projects.
6. To provide rework or make call for the required rework processes.
7. Providing guidance to the team of operators.

Competence Requirements

• Preferred to have NTC / Diploma in engineering field or equivalent.
• Fresh NTC / Diploma holder may be considered, else others with minimum 2 years of related work experience in manufacturing environment.
• Able to read and interpret technical drawing.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

· Involve in hands-on execution of the plant operations and assist Manufacturing

· Associates in troubleshooting

· Monitor and analyse processing parameters for atypical trends and improvement opportunities

· Perform solution and equipment preparation

· Stage components for autoclaving and washing

· Support in-process testing of production samples, prior experience with analytical instrument will be a plus point

· Actively support continuous improvement initiatives

· Support Safety audits

· Adhere to any applicable EHS and regulatory requirements

· Ability to follow written procedures, recognize and report malfunctions

· Evaluate documentation/data according to company and regulatory guidelines

· Engage & interact with inspectors (internal and external)

· Interpretation and application Good Manufacturing Practice (GMP) knowledge is required

· Basic statistical mathematical skills

· Ability to organize work and handle multiple priorities and meet deadlines

· Need to understand, apply and evaluate basic chemistry, biology and physical principles

· Understanding of analytical methods

Basic Qualification:

· Diploma in Science or Engineering

Preferred Qualification:

· NTC/ITC/Diploma in Chemical, Pharmaceutical, Life Sciences or Bio-processing related disciplines

· Fresh graduates are strongly encouraged to apply.

· Proficiency in reading and writing English

· Demonstrate commitment to cGMP, EHS compliance aspects of clean-room plant operation, prior experience and demonstration of cGMP knowledge is a plus

· Knowledge of plant and unit operations (autoclave, parts washers, process equipment), good problem-solving skills

· Excellent self-motivated team player with hands-on attitude and good communication skills

· Experience with Emerson DeltaV, LIMS, TrackWise

· Should understand, apply and evaluate basic chemistry, biology and physical principles

· Required to work any shift in support of operations that may include 24/7

· Mechanical ability/expertise

DUTIES AND RESPONSIBILITIES

• Operate the process to meet the conditions specified in manuals/instructions
• Operate the process equipments at site in accordance with operation plan.
• Take measures to improve production status and equipment performance on productivity and quality after approval of shift senior technician
• Patrol plant process, confirm the condition of process and equipments and report disordered matter to senior shift technicians.
• Prepare and organised patrol records
• Take a sampling for analysis of products and process evaluation.
• Report all incidents, near misses, deviation from plan and take part in further investigation when required.
• Assist in coordination of daily maintenance planning, and participate in maintenance activities and shutdown/start-up of sections.
• Provide support for maintenance group /quality control group, if any problem arises.
• Work as shift Analyst , when designed by supervisors
• Perform the role as an auxiliary fire Fighter

Requirements:

• Diploma or NITEC in Chemical engineering or equivalent.
• Minimum 3 year experience in chemical plant. The experience in polymerization unit and extrusion unit or a minimum 3 year experience in manufacturing plant such compounding or extrusion is advantageous.
• Possess basic knowledge of maintenance, chemical engineering and analytical procedures.
• Experience in operation via DCS systems is advantageous
• An effective team player with good communication
• Able to work shift in a fast paced environment.

Please include the followings in the resume:

• Reason for leaving
• Last drawn salary
• Expected salary
• Availability

*We regret to inform that only shortlisted candidates will be notified.

Job Scope

• Perform laboratory analysis for routine/ad-hoc/field samples
• Manage trouble-shooting work on laboratory equipment and apparatus
• Perform equipment calibration, routine and preventive maintenance
• Data entries and other administrative duties

Requirements

• GCE 'O' Level with credits in Sciences, OR
• NITEC / Higher NITEC in Chemical Process Technology, OR
• Diploma in Chemical Process Technology / Chemical Engineering
• 1 - 2 years of laboratory experience
• Analytical mind, vigilant, safety conscious
• Good verbal and written communication skills

Benefits

• Free staff meals
• In-house gym facility
• Short walking distance from Tuas Link MRT
• On job training provided

Job Responsibilities

• Perform coffee equipment’s preventative maintenance
• Diagnose equipment problems and recommend solutions to resolve
• Handle delivery, installation, relocation, and removal of equipment and accessories
• (Include all connection fittings required on-site that belong to company assets)
• Site inspection for new Installation & additional requirements
• Perform scheduled standby duty to handle service calls/messages from the service phone or Tech
• supervisor after office hours
• Observe and comply with the Company’s Standard Operating Procedures (SOPs)
• Report active schedule to Tech Supervisor/Admin
• Provide training to customers on machine usage and maintenance
• Calibration for Manual/Auto Coffee Grinder
• Any ad-hoc duties as assigned by the Manager

Job Requirement

• Minimum National ITE Certificate (Nitec) in Mechanical Engineering / Electrical Engineering or relevant.
• Minimum one year of relevant working experience handling installation and maintenance of F&B equipment
• Possess Singapore Class 2B or/and 3 driving license is preferred
• Ability to understand equipment drawings and diagrams
• Physically fit to manage bending, lifting heavy equipment, and working in confined spaces
• Basic computer knowledge to work with Microsoft Excel, Word, and handheld devices during
• operation
• Good interpersonal and communication skills
• A meticulous, honest, organized, and fast learner
• Ability to work independently as well as in a team environment
• Ability to multi-task and prioritize to meet tight deadlines to achieve the required targets

At Masstron, we're hiring directly for our growing team – no recruitment agencies involved. Join us and be part of a dynamic, in-house work environment!

We are looking for a skilled Assembly Technician to join our team. In this role, you will assemble communication racks and perform electrical wiring based on detailed assembly drawings. Your expertise will help ensure that all products meet high-quality standards and are built to specification.

Key Responsibilities:

• Assemble communication racks and components according to mechanical and electrical assembly drawings.
• Perform precise electrical wiring, cable management, and component installation to meet project specifications.
• Inspect and verify assemblies to ensure compliance with technical drawings, wiring schematics, and quality standards.
• Troubleshoot and resolve any assembly or wiring issues to ensure timely project completion.
• Collaborate with the engineering and quality assurance teams to address any technical or quality concerns.
• Perform routine maintenance of tools and equipment, ensuring all are in good working order.
• Identify and report any equipment malfunctions, recommending solutions to maintain smooth operations.
• Ensure all work is performed in compliance with safety guidelines, promoting a safe and organized workspace.
• Actively participate in process improvements to optimize assembly efficiency.

Requirements:

• Proven experience in electrical and mechanical assembly, particularly in the communication or related industries.
• Ability to read and interpret technical assembly drawings and electrical wiring diagrams.
• Strong mechanical and electrical aptitude with excellent problem-solving skills.
• Attention to detail and a commitment to high-quality workmanship.
• Good communication skills and ability to work effectively in a team-oriented environment.
• Flexibility to adapt to changing project requirements in a fast-paced production environmen

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently

KEY DUTIES AND RESPONSIBILITES:

• Perform receipt of incoming raw and packaging materials.

• Maintain and update documents related to Delivery - Acknowledgments, Goods Receipt Note along with supporting documents.

• Ensure that materials are kept as per the storage conditions.

• Perform dispensing and sieving of raw materials for production use. Perform cleaning of accessories used and the dispensing booth I area after completion of the dispensinq activities.

• Issue packaging materials for packing use.

• To give the planned output dispensing and sieving of raw materials.

• Regularly verify physical stock, review against system stock and identify discrepancies.

• Perform performance checks for the weighing balances (as required). Coordinate for calibration / preventive maintenance for all Warehouse equipment and instruments.

• Intimate and follow up with Maintenance department for breakdown rectification of Warehouse equipment.

• To ensure maintenance of Warehouse area and equipment in the state of cleanliness as per SOP.

• Assist in performing routine check and ensure proper cleaning of premises by contract cleaner.

• Assist in investigation in case of any process deviation, non-compliance.

• To carry out preventive and corrective actions for observed non-conformances.

• Assist in installation and qualification of Warehouse equipment.

• Ensure compliance to GxP /Safety/ HSE / Quality policies.

• To coordinate with QC for sampling of raw and packaging materials. Arrange sampling activity and cleaning of sampling booth.

REQUIREMENT

• Good understandinq of safe workinq practices and cGMP.

• A good team player with positive learning attitude.

• Willing to work in Tuas area, in warehouse and dispensing environment.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Warehouse/ Logistics or relevant disciplines

• Preferably with 3 years' relevant experience in Pharmaceutical manufacturing warehouse/ store operation.

• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Job Info:

• Salary: Basic up to $2700 + Shift Allowance $20/ day + AWS + VB + OT
• Working Hours: 4343 Shift (Sunday - Wednesday/ Sunday - Tuesday/ Wednesday - Saturday/ Thursday - Saturday); 8am - 8:15pm
• Location: Woodlands

Job Scope:

• Installation of production equipment
• Perform troubleshooting of equipment
• Assembling

Requirements:

• Need to work in a cleanroom environment and wear the jumpsuit
• Able to read schematic drawings and perform basic troubleshooting
• Must be familiar with mechanical assembly

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Description

• Preparing the list of works, materials, tools, machineries, and other things to be used.
• Planning of works for the task given.
• Conduct inspection before and after the work.
• Able to communicate with the User
• Communicate closely to Supervisors by updating the works such as before, progress, after or completion of works on site.
• To attend and assisting in firefighting, major breakdown such as pipe burst, ceiling collapse, leaking, choke, etc., when there is an outbreak.
• Routine servicing, repairs and replacement of spares, consumable materials, items and components to all systems and equipment to ensure that they are operational.
• Knowledge in repairing of door accessories and hardware, painting works, carpentry.
• Hands-on support to Building operations
• Responsible for any ad hoc duties tasked by direct Supervisor or Management
• Carry out preventive and corrective maintenance of the designated Building premises.
• Documentation of scheduled routine findings and rectification.
• Attend to all work orders issued by the operations and management
• Knowledgeable in repairing of plumbing & sanitary fitting & fixtures.
• Daily routine inspection on building premise, Building fixtures and fittings etc.
• To handle & manage external Specialist contractors awarded jobs on-site.

Job Requirements

• Educational qualifications with either of the following:
• Higher NITEC (or equivalent) in relevant FM discipline, with minimum 3 years relevant experience; or
• NITEC (or equivalent) in relevant FM discipline, with minimum 5 years relevant experience; or
• Minimum SEC (Skill Evaluation Certification) of relevant FM discipline accredited by BCA, with minimum 5 years relevant experience; or
• Minimum 10 years of experience.
• Comfortable to work in hospital setting
• Able to commit to 5.5 work week with staggered rest days implemented due to operational requirements
• Able to work Overtime as and when operational requirements or work urgency entails.

Position: Technician (Electrical & Instrumentation)

Job Description & Requirements

Responsibilities:

• Work closely with operation & mechanical team as part of the day-to-day maintenance activities and supporting plant operation to minimize downtime.
• Assist Engineers on installing, inspecting, maintaining, operating, troubleshooting, repairing, and calibrating various pneumatic, hydraulic, electrical and electronic equipment.
• Read and understand manuals, schematics, and P&ID's
• Basic knowledge on automated control systems (PLC)
• Target for incident free and reliable operations, including timely and proper maintenance of systems.
• To attend to all job requisitions, complaints, breakdown and as well as monthly preventive maintenance schedule to the relevant department.
• Ensure documentation and Preventive Maintenance (PM) procedures are constantly updated.
• Ensure technical, environmental and safety aspects in all matters are in compliance with the HSE regulations.

Requirements:

• Candidate must possess at least a NITEC, Diploma, Advanced/Higher/Graduate Diploma, Engineering (Electrical & Instrumentation) or equivalent
• Sound working knowledge on major electrical system (eg. Transformers, Switchgears, motor, etc.), experience in Distributed Control System, Programmable Logic Controllers, with good understanding of the pneumatic and hydraulic control system.

Duties & Responsibilities:

• Provide technical support to the production machines and ensure tasks performed are completed within full cGMP compliance
• Operate the production machines and ensure production meets daily output
• Perform mould set-up and mould insert cleaning as and when required
• Use optical and mechanical devices for measurement and inspection of moulded parts
• Perform in-process quality inspection during production to ensure the quality of products meet specifications
• Perform troubleshooting, servicing, calibration and preventive maintenance on production machines, jigs or fixtures
• Support new machines setup
• Perform tasks in accordance to safety procedures to ensure plant safety
• Perform data collection and recording of machine and process data on specified data log book or record sheet
• Ensure all processes and activities carried out are consistent and comply with approved procedures and meet quality standards

Experience

• Minimum NITEC in Electrical, Mechanical or Mechatronics Engineering
• Minimum 1 year of related experience in a fully automated manufacturing environment
• Must have hands-on experience in both electrical and mechanical components.
• Good understanding of electrical and/or mechanical diagrams
• Possess knowledge in polymer engineering / science / manufacture and experience with moulding high precision parts will be an added advantage
• Able to perform 12 hours shift work and is willing to work overtime on both weekdays and weekends when required
• Willing to work in clean room environment
• Responsible and independent worker who requires minimal supervision
• Must be a team player

• Assemble and install mechanical systems for industrial, electromedical, and manufacturing purposes Implement cost-effective changes in equipment design to improve reliability and safety
• Assist mechanical engineers in developing, building and maintaining machines and tools
• Read and interpret engineering designs, plans, and diagrams for piping, transmission, and HVAC systems Prepare cost and material estimates for a project
• Test and analyze machines, tools, and components to determine their performance, strength and response to stress
• Design manufacturing implements such as jigs, dies, and moulds
• Carry out inspections to identify faults and initiate repair of mechanical systems or products
• Monitor mechanical processes to ensure conformance to standard project procedures Use
• CAD software and technology to prepare drawing plans and design for an engineering project
• Assemble components or machine parts to form integral or complete product unit
• Provide technical solutions to mechanical problems found in a variety of industries
• Develop and design prototypes of equipment
• Ensure compliance with health/safety procedures and regulations
• Implement quality control systems useful in evaluating and testing mechanical processes/product for consistency.
• Liase with various departments to completed the job.
• Report to Management Level

Requirements

• Degree in Engineering Mechanical
• Working Location : Jurong West
• Working days : Monday - Friday (5 Days)
• Shift Work required ( Rotation work at Saturday & Sunday)
• Require to work at Night Shift

Job Responsibilities:

• Perform all production activities at various stages and to work as a team with other production personnel to achieve production targets in accordance with ISO Quality Management System and applicable safety standards.
• Production Processes
• Weighing, mixing, filter preparation, filling and packaging.
• Completion of all associated production records in accordance with good documentation pratices
• Transfer of raw and packaging materials as well as finished products
• General Duties
• Perform house-keeping and first-level trouble-shooting of equipment as needed.
• Equipment and area cleaning on regular intervals.
• Comply with all safety and environmental regulations.
• Work on continuous improvement initiatives within Production.
• Handle non-routine duties as assigned by senior technicians or Production supervisor.

Job Requirements:

• Min GCE 'O' Level / Nitec in production, preferably in industrial engineering.
• Min 3 years of related working experience, preferably in chemical process related industry / production factory
• Computer literate (MS Office) and knowledge of Chemistry preferred
• Experience in material handling with forklift or maintenance will be an advantage
• Forklift License preferred
• Positive mindset with a sense of urgency
• Dedicated and able to work independently as well as a team player
• Customer focus with emphasis in quality
• Good written and verbal communication and interpersonal skills
• Work hours: 5 days, day shift
• Occasional overtime required
• Work Location: Jalan Tukang