Responsibilities

· Perform overhead cranes, gantry cranes, monorail cranes electrical installation and troubleshooting task, repairs and parts replacement to resolve related site issues

· Recommendation of part replacement to ensure continuous operation of the equipment

· Coordinate and liaise with Project Engineer/Manager and respective supervisor on tasks and works relating to the project

· Responsible for doing control panel and any other works related to Electrical duties

· Ensure compliance with relevant standard

· Ensure compliance with company’s Quality Management Systems

· Working closely with Supervisor and Mechanical team to get the job done

· Ensure service and work readiness during office works hours and after hours

· Other ad-hoc duties as assigned

Requirement

Diploma/Degree in Electrical/Electronic

Minimum 2 to 3 years in the Crane industry

Knowledge of crane troubleshooting, various brands of inverters, PLC system.

Ability to generate Electrical drawings in accordance to Singapore standards a plus

Holders of Driving Licence Class 3

Requisition ID: R000053812
Job Location: Singapore - Jurong Island

To submit application, please click below posting link or copy and paste to a new browser:

https://chevron.wd5.myworkdayjobs.com/jobs/job/Singapore-Oronite-Plant-Main-Office/Mechanical-Technician_R000053812

• ·Performs maintenance, repair, alignment and testing of rotating equipment and components such as compressors, chillers, centrifuges, pumps and gear boxes, mechanical seal, couplings etc
• Performs maintenance servicing for pressure relief devices such as Pressure Safety Valve, Breather valves, Emergency hatches etc.
• Supervises maintenance, cleaning, repair and handover of fixed equipment such as boilers, pressure vessels, storage tanks, piping, heat exchangers, fin fans, painting and insulation work etc.
• Read and understand equipment drawings, datasheets, crane lifting plan, P & ID or other instructions
• Determine materials, tools, manpower and methods required to complete the maintenance task
• Develop Job Safety Risk Assessment for every work assigned. Ensure Safe Work Procedures are followed. Ensure safeguards are followed such as valid permit are issued, wearing prescribed Personal Protection Equipment etc.
• Liaise with operations for system handover; liaise with other functions such as warehouse and equipment vendors for completion of urgent break-in work
• Writes post maintenance reports, communicates findings to relevant work groups; follows and completes maintenance quality assurance checklist
• Assists in troubleshooting equipment with operations and equipment vendors; able to utilize and interpret manufacturer’s operation and repair manuals

Required Qualifications:

• NITEC/Higher NITEC/Diploma in mechanical engineering or related engineering discipline
• Minimum 2 years of relevant working experience
• Possess a high level of safety awareness and chemical plant safety experience.
• Good knowledge with Permit to work system, preparing quality JSRA(Risk Assessment).
• Comply with SWP (Safe Work Practices), Procedures and Job Aids.
• Good experience in inspection, repair, installation, and alignment of rotating and stationary equipment such as pumps, compressor, blowers, agitators, various type of manual valves, vessels and heat exchangers.
• Preferably with background in oil & gas, petrochemical, and pharmaceutical industries
• Strong oral and written communication skills
• Ability to plan and schedule work efficiently. Ability to work effectively in a scheduled and customer driven environment.
• Ability to use and update simple work status and history data into SAP system

Preferred Qualifications:

• Able to operate drilling and fixed hoist
• Able to thread piping and fittings for assembly, join PVC piping and tubing
• Able to perform hydro-test of fixed equipment or rotating equipment during integrity/leak test
• Utilize Computerized Maintenance Management System (CMMS). Input into CMMS details such as equipment history, time confirmation, work notification history. Provide feedback post maintenance for continuous improvement'

Job duties:

• Preparing relevant reports & scheduling jobs
• Conducting marine equipment’s overhauls, inspections, & repairs on site
• Dealing with products such as couplings, shafts, mounts, brakes, backstops, fluid couplings
• Troubleshooting diesel engines, gearboxes and gensets

Requirements:

• 3 to 5 years hands on experiences in mechanical troubleshooting, overhauls, repair, & inspection for marine related products & machines
• ITE/Diploma level in any engineering related course
• Possess valid class 3 license

Salary: Basic Up $5000 + Variable Bonus

Working location: Pioneer/Benoi Area (West)

Please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Support Operations Supervisor in operating the chemical processing plant to ensure quality product and to meet business targets.

Key Responsibilities:

• operate, monitor process equipment to ensure that the process is operating within defined conditions and product specifications
• work with Operations DCS Technician to deal efficiently and effectively with any deviation in process parameters to ensure “Zero” safety and environment incident
• patrolling, inspection of field equipment and data logging
• Perform - routine sampling of process and conduct analysis - housekeeping and PPM of assigned area - loading / unloading raw material - minor maintenance
• prepare plant equipment for release to maintenance crew
• perform inspection and audit to meet corporate safety and local legislation guideline
• Be a member of the Site Emergency Response Team

The Candidate should have:

• Diploma in Chemical Engineering or related discipline or
• NITEC/Higher NITEC in Chemical Process Technology, with minimum 2 years of relevant working experience.
• 2-5 years field operations experience in a high hazard chemical plant, with DCS experience would be advantageous
• Preferable to have a Boiler Attendant 1st grade (preferred) or 2nd grade and/or Steam Engineer 1st grade (preferred) or 2nd grade.
• Commitment and adherence to safety systems
• Strong analytical thinking, practical problem-solving and good communication skills
• Conversant with World Class SHE and Operational principles relevant to operation of high hazard plant
• Ability to work effectively in a multi-discipline and multi-cultural team in a high pressure environment
• Good command in English and computer literacy
• Able to perform shift work
• Diploma holders who just graduated from relevant discipline are welcome to apply

• To conduct sampling of incoming waste.
• To conduct laboratory analysis testing of Pre-Acceptance, Post-Acceptance, process, monitoring and adhoc samples from internal or external customers.
• To carry sample analysis according to standard operating procedures.
• To perform data entry in LIMS or spreadsheets for results reporting purposes.
• To carry out calibration and maintenance of all laboratory equipment as per schedule or instructed.
• To ensure good housekeeping in the laboratory.
• To follow the existing system and documentation as per the procedures.
• To update the relevant records
• To work harmoniously with colleagues in the same department and other department
• To ensure a safe working environment in the lab.
• Any other task assigned by management.
• Safety is a core value at Veolia, and a pre-condition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Diploma in Chemistry/ Chemical Process Technology; or O level in science stream with at least 3 years of relevant experience.
• Able to read and communicate in English.
• No colour blindness.
• Comfortable with working on Monday to Friday (7.30am to 4.30pm) & Alternate Saturday (7.30am to 11.30pm)

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Responsibilities • Involve in hands-on execution of the plant operations and assist Manufacturing Associates in trouble-shooting • Monitor and analyze processing parameters for atypical trends and improvement opportunities • Perform solution and equipment preparation • Stage components for autoclaving and washing • Support in-process testing of production samples, prior experience with analytical instrument will be a plus point • Actively support continuous improvement initiatives • Support Safety audits • Adhere to any applicable EHS and regulatory requirements • Ability to follow written procedures, recognize and report malfunctions • Evaluate documentation/data according to company and regulatory guidelines • Engage & interact with inspectors (internal and external) • Interpretation and application Good Manufacturing Practice (GMP) knowledge is required • Basic statistical mathematical skills • Ability to organize work and handle multiple priorities and meet deadlines • Need to...

• Experience with electrical systems such as schematic, SLD, Layout, Control wiring drawing of MCC, DB lighting boards, soft starters / drives, earthing and lighting layouts.
• Perform daily preventative maintenance and troubleshooting on plant-wide electrical and instrumentation systems. Installation, Configuration, calibration and troubleshooting of PT, DPT, LT, TT and Mass flow meter.
• Hands on experience in BMS with HVAC, MV and LV Electrical systems.
• Conduct of inspection, testing and repair of commissioning equipment on Instrument system, control and component under the maintenance team.
• Condition monitoring and predictive maintenance of critical instruments and take corrective actions to avoid breakdown.
• Having good knowledge in megger test, PI test and gas detectors.
• Timely close all work orders assigned by supervisor in CMMS.
• Knowledge in creating risk assessment for non-routine jobs.
• Follow Instrument maintenance work planning and scheduling including procedures.
• Ensures quality of work within the set time frame, record and report.
• Ability to work on remove and reinstall units, configuring, calibrating and maintaining control, measurement and indicating instrumentation (Pneumatic, analog and digital)
• Coordinate and liaise with contractors in supervision of statutory equipment inspection and testing at site.
• Always follow and make sure plant safety rules and regulations.
• Participate in monthly safety committee meetings.
• Conduct routine 5S at maintenance workshop, store, substations and work area at site.
• Reporting to the supervisor on daily work activity.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Diploma in Control & Instrumentation or equivalent is an advantage.
• At least 5 years of previous experience of working in electrical and instrumentation in Chemical Process or Treatment Plant Industry.
• Experience in DCS and programmable logic controls is an advantage.
• Good verbal and written communication skills.
• Good working knowledge in Microsoft applications (such as Word, Excel, PowerPoint, Project).
• Experience in using CMMS (Computerized Maintenance Management System) is an advantage.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided from Boon Lay MRT station or Choa Chu Kang MRT station.

Job duties:

• Performing electronic products/printed circuit board assembly
• Conducting pcb repair or related services
• Troubleshooting and soldering relevant parts
• Other general duties

Requirements:

• N/O/ITE in any field
• 1 to 3 years assembly technician experience from semiconductor industry

Salary up $2800 + Overtime

Monday to Friday, 8.30 am to 6.30 pm

For interested applicants, please click "Quick Apply”

Alternatively, please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

KEY JOB PURPOSE

As a process technician, you are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments, analyzing data, and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

· Prepares substrates/precursors, loads samples and prepares material deposition process for experimentationin time and quality .

· Evaluates performance of process system.

· Interface with team members, understand their detailed plan and requirement.

· Monitor process and hardware performance.

· Records process conditions and experimental observations.

· Measure and characterize materials and devices.

· Report data to the research team.

· Assist in laboratory and equipment maintenance.

· Assist in ordering equipment, chemicals and consumables, and coordinates with vendors and purchasing.

· Perform routine shut down procedure.

· Ensure cleanliness of work area, upkeeps equipment and assists in maintenance program and operating of equipment.

· Part of the Emergency Response Team Member in the Company to react in all sort of emergency and execute function as a first aider.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

· Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.

· Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.

· Capable to work in a clean laboratory environment daily

· No disciplinary issues history

· Self-disciplined, good team player

· Responsible and independent worker

· Reactive to malfunctions

· High self-motivated and effective team player with good communication skills

· Attentive to details

· Strong problem-solving skills and a passion for scientific inquiry.

· Good written and verbal communication skills (both in Mandarin and English)

· Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Perform daily batch processes in accordance to SOP and comply strictly to safety, quality and environmental guidelines.
• Perform equipment line-ups and operate reactors in accordance to established practices and procedures.
• Charge chemicals into reactor manually.
• Carry out drumming operations as and when required.
• Report all process/equipment/environmental abnormalities, incidents and/or near misses to Shift Superintendent/Engineer/Production Manager. Take part in further investigation when required.
• Adhere to Company and departmental procedures, SHEQ rules and regulations, and GMP at all times.
• Carry out scheduled housekeeping activities.
• Ensure proper handover and takeover during shift changes.
• Participate as CERT member.

Requirements:

• ITE Certificate/ Diploma in Engineering (Chemical), Engineering (Industrial), Engineering (Material Science), Engineering (Mechanical), Engineering (Petroleum/Oil/Gas) or equivalent.
• Relevant working experience in chemical industries.
• On-the-job raining will be provided for entry level.
• An effective team player with good communication skills.
• Must be able to work on 12-hours rotating shift in Jurong Island.
• Remuneration will commensurate with qualifications and experience.

Project Description

Electro-Mechanical Assembler (Technician), Built PCBs, wiring harnesses, and complete electro-mechanical assemblies for major oil and gas service industry, using provided documentations.

Responsibilities

a. Assemble PCBs following the provided documentation and specifications.
b. Construct wiring harnesses according to electrical schematics and assembly instructions.
c. Assemble complete electro-mechanical systems and devices used in the oil and gas service industry.
d. Ensure the quality and accuracy of each assembly, adhering to industry standards and guidelines.
e. Identify and troubleshoot any assembly issues, making necessary adjustments and repairs.
f. Collaborate with the engineering team to resolve any design or assembly-related challenges.

Skills

- Proficient in soldering large complex PCBs, wiring harnesses, and complete electro-mechanical devices used in oil and gas applications
- Strong experience with various solder types: Sn63, Sn96.5, Pb85, Pb93.5, Au80Sn20; expert in HMP and Gold micro-soldering
- Skilled in using a microscope for high-precision solder tasks;
- Ability to perform visual inspection and basic operations with a multimeter to identify and make necessary repairs or modifications;
- Accustomed to technical procedures: step-by-step instructions, work requests, BOM, electrical-mechanical schematics and prints, wiring diagrams, parts inventory
- Perform testing, repairs, reworks, or modifications to existing circuits.
- Identifying potential failures to minimize rejection.
- Diploma, higher NITEC Or NITEC in Mechatronics/Electrical and Electronics Engineering
- General mechanical/electrical knowledge with electro/mechanical device
- Should be able to read mechanical/ electronics schematics
- Work safely at all times, complying with health and safety and other relevant regulations, directives and guidelines
- Hands-on Experience in a Soldering environment with high-temperature boards
- Proficient in the use of basic hand tools, calipers, multimeter, computers and other basic electronics instruments

Nice to have

Oil&gas domain experience

Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Contract Sterilization Services Pte Ltd, wholly owned subsidiary of Serial System Ltd (a SGX mainboard listed Company), assembles and distributes medical devices. It offers a full range of standard and customised perfusion tubing packs. Marketed all over the Asia Pacific region, these products are the preferred choices of many leading hospitals.

We invite a suitably qualified candidate to fill the following position:

Maintenance Technician

Responsibilities:

• Responsible for M&E matters and facility maintenance
• Perform routine checks and troubleshooting of plant equipment
• Plan maintenance schedule for machines equipment, facilities and breakdown maintenance of the M&E Systems
• Discuss with contractor on machine matter or facility maintenance
• To highlight any follow-up actions from maintenance checklist
• Follow-up actions for yearly equipment and electrical licence application
• Respond to urgent/emergency situations
• Carry out scheduled weekly preventive maintenance and yearly equipment calibration
• Control chemical usage consumption and spare parts control
• Ensure good housekeeping at work areas

Requirements:

• NITEC or Higher Nitec in Mechanical/Electrical with at least three (3) years relevant experience
• Strong in problem solving/analysis
• Able to multi-task
• Able to work in cleanroom environment
• Able to work as a team player
• Possess positive work attitude with on-going learning mindset
• Proficiency in Computer literacy
• Understanding of welding knowledge will be an added advantage

Interested candidates are invited to submit their resumes and expected salary. (In keeping with PDPC’s guidelines, please do not include NRIC No in your resume. We reserve the right not to process any applications that do not adhere to these guidelines.)

We regret that only shortlisted candidates will be notified.

Company Address: 2 Tukang Innovation Grove, #08-05, MEDTECH HUB, Singapore 618305

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Job Description:

• Carry out maintenance and troubleshooting of production machines, equipments, toolings and facilities
• Daily tooling setup in accordance with the Work Instruction.
• Carry out Preventive maintenance on production machines, equipments, toolings and facilities according to Preventive Maintenance schedule
• Carry out modification and improvement projects of production machines, equipments, toolings and Facilities
• Schedule and coordinate contractor works to ensure specifications / requirements are met in a timely manner
• Coordinate with Engineer and tooling suppliers on quality issues concerning the tooling based on production output.
• Assist superior in setting up of new equipment, modification, relocation of equipment and other related matters
• Assist superior in inventory control of spare parts
• Maintain and account for workshop tools and equipments and maintain cleanliness in maintenance room
• Any other task assigned by manager such as cost effectiveness, waste reduction, lean, site risk assessment.

Requirement:

• Diploma in Mechanical or Electronic Engineering
• 3-5 years’ related experience in Production environment
• Work independently and with initiative
• Support OT and weekend work is required
• Excellent team player, interpersonal and communication skill

Interested candidates please send Resume in Ms Word format with full Certificate to [email protected]. Regret only shortlisted candidate will be contacted.

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirement and execute task given by team leader.
• Attend to ad hoc job required for train, bus and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

The primary responsibilities for this position will be to (but not limited to):

• Perform replacement of parts and assemblies for marine engines
• Under the guide of service engineer, works from service manuals, maintenance manuals, and facility equipment schematics
• Performs tasks with minimum supervision using experience and good judgment
• Must be able to operate all maintenance equipment and exercise all construction equipment safely for intended purpose
• Communicates verbally in an effective manner with technical staff, other employees and vendors on facility equipment problems or suggested improvements
• Use basic soldering and brazing skills as needed
• Possess a basic understanding of facility systems and construction techniques
• You will be entitled to overtime pay if overtime work is required .
• This role may be required to travel for work overseas occasionally.

Required Skill and Experience:

• Must have marine repair experience
• Should demonstrate good mechanical comprehension and strong communication skills with technical staff and fellow employees

Our Client:

• Oil & Gas industry
• Basic Up $3500 + Variable bonus
• West Area

Job duties:

• Performing installation and assembly of fittings and components
• Dealing with Radial Drilling machine on entries on junction boxes/control panels
• Conducting Electrical wiring and termination
• Using reach truck to loading & unloading equipment & materials from lorry & vans

Requirements:

• 1 to 3 years Electrical technician experience dealing with electronic control unit for drilling equipment.
• ITE in electrical engineering or relevant certification

Working location: Near pioneer

Please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Location: West

Permanent Night shift (10:45pm to 7:30am from Mon to Fri)

Salary up $3500+$300+shift allowances

Have AWS & Bonus

Responsibilities:

• Ensure all production equipment and facilities are maintained well.
• Minimize production downtime by reducing breakdowns.
• Performs preventive maintenance procedures for equipment on a scheduled basis.
• Maintains records of scheduled maintenance procedures. . Train production team on AM (autonomous maintenance) and to support Kaizen.
• Conduct daily walk-through/inspection to ensure that all infrastructure and equipment are in good working condition and provide feedback on any abnormality of failure of equipment for rectification.
• Plan and execute preventive maintenance on infrastructure and equipment.
• Repair and replace broken or malfunctioning components of machinery and equipment.
• Maintain critical spare parts list to minimize production downtime and to plan for sufficient stock of critical spare parts based on possible impact and frequency of parts failure.
• Attend and assist to vendors/ contractors within factory during servicing and maintenance of production, facilities and safety equipment.
• Ensure fire protection equipment is properly maintained and up to date.
• Strictly enforce and follow all health, safety, environment and quality procedures at all times.

Requirements:

• Minimum Diploma in Mechatronics/Mechanical or Electrics/Electronics Engineering or equivalent
• 3 years of relevant working experience in a similar environment

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

1) Conduct routine services and machine maintenance

2) Repair or replace machine transmissions, brakes, engines and other associated parts

3) Change engine and hydraulic oil, brake checks etc

* Knowledge of diesel engine components and operational mechanisms

* Problem-solving ability

* Physically fit

• Perform disassembly, servicing, and installation of plant mechanical equipment (e.g., Pumps, valves, gearboxes, bearings, cylinders, belts).
• Understand fundamental mechanical concepts such as alignment, welding procedures and requirements, vibration monitoring, balancing of rotating equipment, thermal expansion, torque.
• Equip and utilize basic power tools and hand tools such as hand drill, chain block, torque wrench, dial gauge etc.
• Perform corrective maintenance to diagnose and troubleshoot plant mechanical equipment failure.
• Comply with the HSSE requirements and the PTW standards of the plant.
• Carry out necessary paperwork for maintenance jobs such as preparation of MSRA to reporting and recording of jobs done.
• Prepare reports, maintain records, and requisition supplies and parts.
• Inspect and supervise work done by external vendors.
• Execute scheduled, routine, predictive and corrective maintenance activities.
• Report progress of the mechanical maintenance activities and keep equipment maintenance history records. Feedback requirement of spares and contract services for maintenance activities to your reporting officer.
• Follow maintenance work methods/ procedures/ frequencies for execution.
• Daily arrangement of the necessary resources and facilities for timely completion of the jobs.
• Execute annual maintenance plan and update history in SAP incl PM & CM jobs.
• Identify and eliminate hazards in workplaces.
• Execute maintenance strategy for various mechanical equipment and improve reliability and availability.
• Suggest and implement modification jobs, implement OEM improvement program & feedback for root cause analysis for an mechanical related failure.
• Successful candidate may be appointed as part of the Company Emergency Response Team (CERT) (training will be provided).
• Perform other duties as required by reporting officer.

Qualifications & Experience

• Diploma in Mechanical or equivalent Engineering discipline.
• Preferably with three (3) years of experience plant Mechanical maintenance.
• Experience working in the process plant industry is an advantage.
• Experience in Boiler / Utilities plant is preferred.

Preferred Skills & Characteristics

• Strong interpersonal, communication and presentation skills.
• The candidate should be independent, self-motivated, result-driven and have a good sense of teamworking skills.
• Good attitude and possess the willingness to learn on the job.

Location: West

Permanent Night shift (10:45pm to 7:30am from Mon to Fri)

Salary up $3500+$300+shift allowances

Have AWS & Bonus

Responsibilities:

• Ensure all production equipment and facilities are maintained well.
• Minimize production downtime by reducing breakdowns.
• Performs preventive maintenance procedures for equipment on a scheduled basis.
• Maintains records of scheduled maintenance procedures. . Train production team on AM (autonomous maintenance) and to support Kaizen.
• Conduct daily walk-through/inspection to ensure that all infrastructure and equipment are in good working condition and provide feedback on any abnormality of failure of equipment for rectification.
• Plan and execute preventive maintenance on infrastructure and equipment.
• Repair and replace broken or malfunctioning components of machinery and equipment.
• Maintain critical spare parts list to minimize production downtime and to plan for sufficient stock of critical spare parts based on possible impact and frequency of parts failure.
• Attend and assist to vendors/ contractors within factory during servicing and maintenance of production, facilities and safety equipment.
• Ensure fire protection equipment is properly maintained and up to date.
• Strictly enforce and follow all health, safety, environment and quality procedures at all times.

Requirements:

• Minimum Diploma in Mechatronics/Mechanical or Electrics/Electronics Engineering or equivalent
• 3 years of relevant working experience in a similar environment

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• Diagnosis, repairs and servicing of vehicles

• Provide feedback and recommendation for maintenance and repairs

• Lead and coach junior technicians

• Work independently

• Able to handle and solve customer problems accordingly

• Ad hoc assignments

• Service, Maintain & trouble shoot of plant’s facilities
• Service, Maintain & trouble shoot of machinery equipment
• Perform periodic preventive maintenance of plant’s facilities & machinery equipment)
• Perform any other reasonable duties as required by Management from time to time (Such as Safety, ERT, etc)
• Willing to work rotating shifts and on public holidays