Job Description

• Prepare and execute testing activities

1. in support to one or several Projects on railway signalling systems under the direction of his / her hierarchy
2. according to the testing procedure / documentation and following Sub-system T&C Leader and / or PrCOM instructions

• Ensure defects identification and correction (trouble shooting)
• In the event of a non-conformity observed during the commissioning phase, make a return experience (REX) towards the project, and ensure that all design related issues are correctly reported in the adequate tools, including the defect description and associated test context
• Ensure follow-up of detected issues and deliver the commissioning reports.
• Check that the test tools are in perfect working order and calibrated.
• Support V&V team and perform test in lab as per request
• Deliver the committed performance in terms of Quality, Costs and Deadlines and in compliance with client policies, local standards and regulations (in particular EHS and Railway Safety)

Requirements

• This role would suit an energetic and experienced quality engineer who has worked with main and subcontractors for over 10 years
• Master's degree in engineering (preferably electronics or embedded systems) or equivalent experience.
• Railway and signaling knowledge, Previous Engineering, V&V, T&C or Maintenance for Railway Signaling is an asset.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: November 2024

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Primary Objectives of Position

• Manage the overall supervision of maintenance activities in depot and workshop
• Responsible for the availability of passenger trains, engineering train vehicles, light rail vehicles and workshop overhaul or plant equipment for mainline operation.
• Manage the budget expenditure of the section
• Ensure all defects on vehicles/equipment are rectified in a safe and responsive way.
• Provide an effective technical support service to all other Rolling Stock sections, including development and control of an overall maintenance plan, provision of Work Instructions, procedures and technical documentation and provision of regular performance information.
• Ensure that Rolling Stock staff and contractors within their sections are adequately trained and competent to perform their tasks safely and proficiently in the railway environment.
• Overall-in-charge of managing corrective and preventive maintenance of NEL/SPLRT passenger trains, engineering trains, light rail vehicles, or depot plant equipment.
• Overall-in-charge for all engineering projects in NEL/SPLRT Rolling Stock.

Major Responsibilities

• The day-to-day management of staff in their section.
• Ensuring individual roles, functions and responsibilities are clearly defined and communicated.
• Managing section budget resources to maximize maintenance outcomes and improve customer satisfaction.
• Providing advice and support to the HOD and Executive management as required.
• Identifying areas for improvement through training and development programs
• Ensure all staff are adequately trained and competent.
• Manage, lead, and motivate the section to achieve reliability, quality, cost and availability targets to meet customer needs.
• Maintain the performance of all vehicles and depot equipment.
• Perform and standby for company and department duty schedule such as PST, EIC, AEIC or Rerailment duty

The above activities are no means exhaustive and are subjected to amendment whenever is needed

Specific Safety Responsibilities

• Ensure all work related to the section are undertaken in a safe way during all maintenance activities in Sengkang Depot.
• Undertake Monthly Safety Observations of all areas under the purview of Rolling Stock and ensure that controls are in place to achieve safety.

Job Specifications

Minimum Education / Qualifications

• Degree or Diploma in Engineering from a recognized university or polytechnic.

Minimum Years of Relevant Experience

• Preferably with 3 years of relevant experience in Railway Engineering/Maintenance or equivalent

Knowledge/Skills

• Strong Communication, Writing, Analytical and Problem solving skills
• Knowledge of Training and Development, preferably with full ACTA qualification
• Conversant in MS Office software (Word, Excel, PowerPoint)

Attributes

• Highly motivated and resourceful team player
• Strong interpersonal and communication skills
• Strong planning and organization skills
• Analytical and meticulous

COMPANY DESCRIPTION

As the world's leading owner and operator of LPG carriers with five decades of operating experience, BW LPG promotes competitive, sustainable solutions to secure value for society and our stakeholders.

Our global footprint spans seven countries with 17 nationalities represented across our workforce. Our fleet of 39 Very Large Gas Carriers (VLGC) offer a total carrying capacity of over 3 million CBM. From spot voyages and time charters to Contracts of Affreightments (CoAs), our emphasis on flexible, reliable service has earned the trust of leading oil companies as well as trading and utility companies. More information about BW LPG can be found at www.bwlpg.com.

BW LPG is associated with BW Group, a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 490 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW LPG, as a member of the BW Group, is one of Forbes World's Best Employers 2023.

RESPONSIBILITIES

Summary:

The Senior/ Data & Machine Learning Engineer is a hybrid role focusing on developing our modern Lakehouse including pipeline development, and the deployment of machine learning models.

This position combines the responsibilities of a Data Engineer and Machine Learning Engineer, ensuring robust data pipelines and scalable deployment of ML models.

The role involves building data ingestion and transformation processes, deploying machine learning models, and working with DevOps and CI/CD for automated deployments and monitoring.

Collaborating with Business Analysts to ensure business requirements are translated into data solutions.

Working with Data Analysts to deliver accurate and reliable datasets that power impactful analytics and dashboards.

Partnering with other Data Engineers and Analytics teams (e.g., Quantitative Research team) to support advanced analytics and provide datasets for reporting and insights.

They collaborate with System Analysts and the Business to understand the business logic and data lifecycle within our systems and translate this into technical analytical solutions.

Responsibilities

• Design and maintain data pipelines: Design, build, automate, and optimize ETL/ELT pipelines to support data flow, transformation, and availability across the Lakehouse platform.

• Collaborate on data storage and solutions: Partner with analysts to create scalable storage solutions, optimizing data structures for both analytics and ML applications.

• Implement data quality and governance standards: Establish monitoring and enforce data quality checks, ensuring data consistency, reliability, and compliance.

• Optimize and maintain model performance: Continuously monitor deployed models for performance, retraining or adjusting them as needed to ensure sustained accuracy.

• Deploy and monitor machine learning models: Design and implement CI/CD pipelines for model deployment, ensuring efficient and reliable delivery of ML models.

• Mentor junior team members: Guide and foster the professional development of junior data engineers, enabling their contribution to the team and ownership of project deliveries.

Expertise:

• Collaboration and Communication Skills: Excels at working in a team to align data solutions with business needs, focused on creative problem-solving in a fast-paced environment.

• Analytical Thinking & Communication: Strong skills in analyzing and translating data-driven insights and requirements to both technical and non-technical stakeholders.

• Data Pipeline Development Skills: Proficiency in designing and implementing data pipelines to support reliable data ingestion and transformation using Databricks and Spark.

• Data Modeling Expertise: Advanced SQL and Python skills for complex queries and data modeling, enabling efficient data access and transformation.

• Python & Model Deployment Proficiency: Expertise in Python for deploying models and developing APIs for serving predictions.

• Spark & Azure Databricks: Skilled in using Spark on Databricks for processing large-scale datasets and supporting machine learning workflows.

Knowledge of:

• CI/CD Pipeline Creation (incl. for ML Models): Experience in creating CI/CD pipelines, enabling automated testing, validation, and deployment of data pipelines and machine learning models using GitHub and GitHub Actions with Databricks.

• Monitoring & Model Maintenance: Ability to set up monitoring tools for models, track metrics (accuracy, latency), and maintain model performance.

• IaC for Infrastructure Automation: Experience in automating cloud infrastructure management for consistent deployment and scaling using Infrastructure as Code tools like Terraform.

• Power BI Integration: Basic understanding of Power BI for creating visualizations of model performance and metrics for stakeholders.

• Agile Methodologies in Data Engineering: Understanding of agile frameworks to work within iterative sprints and collaborate with cross-functional teams

Experience:

• At least 3 Years in Data Engineering: Proven experience building and maintaining data infrastructure, with a deep understanding of data engineering principles and best practices.

• 1 Year in Machine Learning Engineering: Track record in managing the lifecycle of machine learning models, including deployment, monitoring, and retraining.

• Business & Data Transformation: Experience working in supporting business transformation and process improvement into Data-Driven organizations and systems.

• Agile Mindset and Experience: Thrives in Agile Environments, with a strong resilience, adaptability and responsiveness to change in fast-paced settings.

The position will be based in Singapore.

Only shortlisted candidates will be notified.

Job Description & Requirements

· Manage and monitor all installed systems and infrastructure

· Install, configure, test and maintain operating systems, application software and system management tools

· Proactively ensure the highest levels of systems and infrastructure availability

· Monitor and test application performance for potential bottlenecks, identify possible solutions, and work with developers to implement those fixes

· Maintain security, backup, and redundancy strategies

· Write and maintain custom scripts to increase system efficiency and lower the human intervention time on any tasks

· Participate in the design of information and operational support systems

· Provide 2nd and 3rd level support

· Liaise with vendors and other IT personnel for problem resolution

Requirements and skills

· BS/MS degree in Computer Science, Engineering or a related subject

· Proven working experience in installing, configuring and troubleshooting UNIX /Linux based environments.

· Solid experience in the administration and performance tuning of application stacks (e.g.,Tomcat, JBoss, Apache, Ruby, NGINX)

· Solid Cloud experience, preferably in AWS

· Experience with virtualization and containerization (e.g., VMware, Virtual Box)

· Experience with monitoring systems

· Experience with automation software (e.g., Puppet, cfengine, Chef)

· Solid scripting skills (e.g., shell scripts, Perl, Ruby, Python)

· Solid networking knowledge (OSI network layers, TCP/IP)

Job Duties & Responsibilities

• Research and analyze the project requirement, design the test case and develop test solution

• Take ownership of leading the quality of an assigned project and its features.

• Coordinate the execution of automated tests with a project’s testing cadence.

• Functional/ Regression testing verification.

• API and backend testing.

• Data analytics testing.

• UI and UX analysis and testing.

• Communicate with stakeholders and teammates of testing status and results.

• Contribute to collaboration with test automation team to continuously expand test coverage.

• Contribute to test case prioritization for manual and automated testing prioritization.

• Contribute to optimizing test case prioritization to increase testing velocity.

• Contribute to organisation’s Global QA improvement and project team’s quality process.

• Should have worked on Automation Tests for desktop based application

Job Requirements:

• Minimum Bachelor or Master Degree in IT/Computer Science or similar study background with 5 or more years of experience as a Software Developer Engineer in Testing (SDET)

• Good Knowledge of programming languages like Java, JavaScript and HTML

• Good to have knowledge on Banking or Finance.

• Expertise in automation testing tools like Selenium, Rest Assured , Cypress and Cucumber

• Expertise in BDD, Data Driven, Hybrid Test Automation Framework

• Hands on knowledge of desktop based app and its automation

• Able to adapt to changing business and project priorities.

• Proactive in bringing solutions to observed gaps in requirements and process.

• Proactive in test planning; able to identify and breakout tasks based on a test plan.

• Able to prioritize and execute QA tasks with minimal supervision.

• Execute tasks from QA lead or above.

• Mentor and guide junior level Associate QA Engineers and QA Engineers.

• Perform root cause analysis.

• Install and/or configure tests for systems.

• Optimize test cases for higher efficiency, especially for specific changes in code or features.

• Test client-server interaction.

• Test user behavior analytics.

• Analyze and test UI and UX requirements.

• JIRA and Confluence

Nice To Have Experience:

• Automation test result analysis and investigation of failures.

• Perform change impact analysis.

• Perform risk-based test analysis.

• Bonus skills and tools knowledge:

· GitHub and Bitbucket

· Docker

· Postman

· Jenkins CI

· JavaScript, Node.js & Selenium WebDriverIO

· Kubernetes

· Xray test case management tools

· AWS Cloud.

Interested applicants please send your resume in MS Word format and attention it to Joanna Tan (R1104661).

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

Business Registration Number: 200611680D. Licence Number: 10C5117

Role: Resident Engineer at C2D Solutions Pte Ltd

C2D Solutions Pte Ltd is seeking an experienced full-time Resident Engineer to oversee the technical aspects of construction projects.

Key Responsibilities:

• Manage a team of technical supervisors to ensure compliance with regulatory and client requirements.
• Collaborate with Professional Engineers, regulatory authorities, and contractors for planning, design, and supervision to solve site problems and ensure timely project completion.
• Implement and maintain the site supervision quality and safety assurance system.
• Supervise structural and geotechnical works, identifying any contractor non-conformities.
• Understand and interpret drawings and contract documents.
• Conduct regular site checks to ensure compliance with health and safety regulations per MOM.
• Attend site progress and technical meetings with the project team and client to address issues.
• Ensure proper management of site documentation, including meeting records, safety documents, and submissions.

Qualifications:

• Degree in Civil/Structural Engineering from a recognized university and registered as a Resident Engineer with IES.
• Minimum 5 years of experience in supervising industrial developments, with expertise in bored piling, precast structures, and structural steel.
• Knowledge of AutoCAD and BIM is preferred.
• Strong supervisory and leadership skills.
• Effective communication skills to interact with all levels of personnel.

This role is essential for ensuring high standards in construction project execution.

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

Company Description

Higogame is a trailblazer in the mobile gaming and entertainment industry. Since our inception in late 2020, we have been dedicated to transforming the gaming landscape in Southeast Asia and beyond, delivering innovative and immersive experiences that engage millions of players around the globe.

• Our revenue has seen remarkable growth year after year, with operations extending across multiple regions worldwide.
• In just three years, we've risen to become one of the top two games of our kind in the local market.
• We proudly serve around 2 million active users daily and have a total monthly active user base of 5 million worldwide.
• Our team consists of over 200 talented employees, including a robust R&D division of more than 100 experts.
• We offer exceptional career development opportunities and foster a multinational culture that empowers everyone to reach their full potential.

Join us as we continue to push the boundaries of mobile gaming!

Job Responsibilities:

1. Responsible for the secure operation and maintenance and development of the core transaction system database and related foundational platform systems.

2. Design and implement high availability solutions for databases to ensure 99.99% or higher availability.

3. Perform fault diagnosis and emergency response, analyzing and resolving database performance issues while accurately identifying root causes in a timely manner.

4. Optimize SQL, providing suggestions for improvement and optimization of problematic SQL queries.

5. Conduct forward-looking research on database technologies and promote their implementation and usage.

6. Provide technical consultation and system support services to project managers or system leaders.

Qualifications:

1. Over 3 years of work experience, including at least 3 years in dedicated SQL Server database operation management and technical support.

2. Proficient in using Performance Dashboard, SQL Profiler, and related diagnostic tools

3. In-depth understanding of indexing, physical and logical storage, execution plans, and blocking and deadlocking

4. Skilled in backup and restoration, DBCC, database clustering, mirroring, replication, and distribution, with a strong understanding of relevant Windows platform knowledge (clustering/AD domain). Candidates with experience in two or more database technologies, including SQL Server, will be preferred.

5. Familiar with Linux, Windows, IIS, SQL Server, Apache/Nginx, MySQL.

6. Knowledgeable about the architecture, replication, high availability, monitoring, and backup mechanisms of SQL Server and MySQL, with practical maintenance experience preferred

7. Proficient in SQL statements for SQL Server and MySQL, including writing stored procedures and designing table structures.

8. Detail-oriented, patient, calm under pressure, responsible, willing to research technology, and highly interested in DBA work, with good communication skills and a spirit of teamwork.

Job Description

As Engineer of MSB Lean Manufacturing, you will manage the implementation of Lean transformation methodologies and tools in Assembly, Test and SSD manufacturing at MSB. You will collaborate closely with site functional teams to identify, explore and implement lean methodologies and tools to drive improvements in throughput, labor productivity, yield, and cycle time performance.

Responsibilities:

• Lead the adoption and implementation of Lean methodologies and tools across Assembly, Test, and SSD manufacturing.
• Facilitate continuous improvement events across different functional teams (e.g., Kaizen, Value Stream Mapping (VSM), Projects, Workshops).
• Develop and sustain programs and systems to foster a Lean culture.
• Conduct labor productivity analyses (e.g., Touch-time, MMR, spaghetti charts) to enhance operator and technician efficiency and reduce operational errors.
• Oversee Utilization/ Overall Equipment Effectiveness (OEE) to identify key sources of losses and improvement opportunities.
• Collaborate with functional experts to identify areas for improvement through the application of Lean methodologies and tools.
• Propose Lean approaches and initiatives, including Kaizen and Continuous Improvement Projects.
• Act as the key integrator between central and site functional teams, developing, driving, and communicating progress on critical Lean improvement initiatives.
• Develop an overall view of critical initiatives and their impact on key performance indicators.
• Provide visibility on program status, including key achievements with clear ownership.
• Trigger interventions to ensure programs stay on track towards targets.
• Support regular reporting and meetings with senior leadership, including deep dives for weekly/monthly reports and ad-hoc senior management updates.

Requirements

• Bachelor’s /master’s in Industrial and system engineering, engineering management, Production & Operation Management, or related field.
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations
• Background in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals will be beneficial

Keen on the role? Apply now!

This role is for a technical support position and they will be responsible for overseeing the project initiated by APAC Infrastructure as a Service (IaaS) team. They must ensure that the project deliverables are delivered on time and aligned to agreed SLAs and processes.They will help ensure the quality of IaaS services remains consistently high, that operating policies are developed or are strictly followed, and adhere to all IT security policies to maintain system integrity and quality.

Key Responsibilities:

Technical Management Responsible for the overall BAU support operations of IaaS systems in APAC (infrastructure in Australia, Singapore, Hong Kong and Japan) and regional oversight of the rest of APAC countries

.Must have skills in :Microsoft Windows Server 2012, 2016 & 2019 Microsoft Active Directory ITIL 3 or 4 Foundation

Good to have skills :PowerShell scripting

• Must have experience working on virtual technology platform VMware websphere 6.x or Microsoft HyperV 2019.
• Must know how to manage Active Directory for the authentication and privilege account management.
• Candidate must be competent on how to manage the OS on physical servers and virtual servers.
• Preferable if the candidate has knowledge and skills working with Low Latency or Electronic Trading Network
• Strong knowledge on governance, server administration and services in cloud based environments. In short, able to follow the bank’s standards, processes and procedures.
• Proficiency in handling and/or contribution to complex IT projects.Knowledge and experience with Ansible Tower, Ivanti, Centrify, Veritas and BMC software.
• Knowledge using or supporting VSAN, iSCSI, DAS, NAS, SAN storage technologies.
• Have good scripting skills, in PowerShell, Python or other programming languages.
• Have knowledge and experience using Agile methodologies and/or has been part of DevOps teams.
• Project Management experience is a bonus

| | Specific Qualifications Required | |

• A professional certification in any of the Operating Systems listed.
• Qualified in ITIL 3 or 4 Foundation

Ob behalf of our client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Senior Sales & Marketing Executive.

Responsibilities

- Achieve sales objectives within product range or assigned districts.

- Pursue sales leads, conclude orders, and initiate internal sales process and logistics.

- Provide technical solutions to Consultants prior to tender calling

- Understanding of local Codes (COP) for Equipment systems

- Attend tender interviews

- For secured contracts, to attend project meetings as and when required

- Handle variation orders

- Manage account receivables

- Visits to customers

Requirements

- Minimum diploma in Electrical/Mechanical/Mechatronics Engineering

- Proven sales record and handle of tender sales

- Good customer relationship management

- Applicants must be based in Singapore currently

Benefits

- Permanent placement

- Career progression

- Sizable organisation in the evergreen industry

Location: East

EA License: 22C0971 | EA Registration: R21101298

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:

As a SoC Design Verification Engineer, you will be you would be part of a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU chips.

• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Mentor junior verification engineers, providing technical guidance and support.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 5 years+ prior industry experience of design verification including significant System Verilog and UVM usage.
• Technical skills:

-Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

• Preferred skills:

- Knowledge of low-power design techniques and verification methodologies.

- Knowledge of hardware-software co-simulation mixed-signal verification techniques.

- Knowledge of gate level simulation methodologies.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

Key Responsibilities:

• Liaise with Solutions team to understand systems design
• Perform installation, configuration and maintenance of network devices and AD server / management server on-site
• Assist Project Managers and Engineers to prepare systems related diagram for the project implementation
• Ensure systems design conforms to contract and technical requirements
• Engage with back line support and/or with vendor’s support to diagnose and rectify technical problems to effectively resolve project implementation issues
• Attend to preventive and corrective maintenance to backend system

Competence (Knowledge, Skills and Abilities):

• Skills in relating to and servicing the customers with a win-win mind set
• Skills in troubleshooting technical problems related to servers, routers, switches, and IoT devices.
• Good knowledge of the security and surveillance solutions landscape and industry trends
• Knowledge on Microsoft Clustering, Active Directory, Agent VI, Milestone, VMware and IT Security is required
• Knowledge of CentOS, Ubuntu, VMware (ESXi), Firewall, Networking, and Windows Server OS
• Proficient in Active Directory, Certificate Services, Virtualization technology, and cyber security is required
• Skills in planning and scheduling
• Professional Certificate in MCSE and CISSP would be an advantage

Requirements:

• Minimum Degree in Computer Engineering or related discipline
• At least 3 years’ experience in a similar capacity
• Experience in installation on Server / Client configuration, Network Storage and IT Network

As a Senior Engineer in PDE (Package Development & Engineering) at Micron, you will be responsible for the Advance Packaging success within your scope in Metro Real-time Defect Analysis (MRDA) and guided by functional objectives, in terms of process, equipment and materials definition, development and/or optimization. You will manage and optimize your area's performance to meet or beat defined metrics. You will apply extensive knowledge to carry out tactics and collaborate with internal and external partners to build and implement packaging technology roadmaps aligned to corporate strategic objectives. You will provide advice to senior management related to tactical decision for the function. You will interact with executives, major customers and/or site managers to provide consultation, influence decisions and identify and resolve critical issues.

Identify, select, and evaluate new process, equipment and/or technology to support current and future requirements for MRDA area

• Define, development and establish new process, equipment design and/or capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new process, equipment capabilities and/or solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Actively participate in Package Development Engineering activities
• Conduct equipment benchmarking to establish the equipment suppliers and platforms for current and future need
• Create decision matrix for equipment and material selection
• Generates and set-up ADC, set-up/improve recipes
• Set-up PMON, Sampling Plans, BKM, CIP Strategies & performance indicators

Installation and qualification of new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional team
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives/personnel
• Establish the feedback loop for Continuous Improvement after mass volume production

Define, improve and/or maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

• Maintain knowledge of design constraints and weakness of existing platform
• Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:

• Bachelor's/ Master's/ PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• 4 or more years of experience with proven track record of technical leadership in semiconductor manufacturing, preferably in MRDA Process & Equipment Engineering. Experience in other Front End areas, in Post Wafer Fabrication & High Bandwidth Manufacturing technology is of greater advantage.
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill
• Hands on in recipe development for inspection and measurement workstation such as KLA, Rudolph, Nordson, CAMTEK preferred

Keen on the role? Apply now!

Role Profile

This technical solution focused role is accountable to setup applications and database and ensure their optimal performance to support various GovTech projects.

Key Responsibilities:

• Setup the application and database
• Perform analysis and review software application functionality and design and suggest improvement to enhance the design to cater for new services
• Consult with software development team, internal users, and clients to improve application performance
• Administer the application including user account management and configuration of the application
• Generate Test Plans and Test Procedures for User Acceptance Tests (UAT)
• Conduct UAT and prepare final UAT Reports
• Keep a record of configuration changes and scheduling application updates
• Support production issues such as establishing root causes of application issues and liaise with the software vendor to resolve issues
• Take care of application migration and new release roll-out
• Document processes and monitor application performance metrics
• Develop tools needed by L1/L2 that will help them with their investigation process

Competence (Knowledge, Skills and Abilities):

• Good understanding of the software and hardware environments for CCTV/networked cameras system
• Proficient in Video and IoT management application, software analysis and design, as well as proposal write up
• Good knowledge on the key features of the CCTV / Networked Video / Security Camera / Video Management product in the market
• Sound network knowledge (Internet Protocols, TCP/IP, DNS, DHCP, SNMP, Network Architecture etc.)
• Familiar with Golang, Node JS, JavaScript, Windows Server OS, CentOS, Ubuntu OS and MongoDB

Requirements:

• High level problem solving and communication skills
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction

Education & Experience:

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering or related field
• At least 3-5 years working experience in Video and IoT Management application, software analysis and design

Terra is a dynamic company with a strong presence across the Asia Pacific region, specialising in innovative communication solutions and services driven by AI technologies. Our comprehensive portfolio includes both hardware and software products, along with tailored services that empower our clients and partners to maintain a competitive edge. At Terra, we are unwavering in our commitment to delivering the highest service levels and exceptional customer experiences.

We are looking for a dedicated and professional Contact Center Officer to join our team! In this role, you will be the first point of contact for customers, managing inbound calls and emails with efficiency and empathy. Your primary responsibilities will include addressing inquiries, resolving issues, and ensuring customer satisfaction through effective communication. Join us to make a difference in each customer interaction and grow your career in a supportive, dynamic environment.

JOB DESCRIPTION – CUSTOMER SERVICE OFFICER (Email and call)

The Customer Service Officer will be working for the Contact Center project. You will be responsible for handling a diverse range of enquiries from members of public via email, call and live chat. You will endeavour to provide a high level of service to MOPs, supported by the Team Leaders and Supervisor, as well as Points of Contact (POCs). A team player and a champion for customer happiness, you will go the extra mile to delight MOPs with insightful and accurate answers.

ROLES AND RESPONSIBILITIES

• Attend to enquiries, feedback & complaints via email, call and live chat.

• Resolve MOP’s queries efficiently and within stipulated datelines

• Liaise with external stakeholders with regards to enquiries and feedback.

• Escalate issues to the relevant internal line units and see to their resolution.

• Practice the no wrong door policy and warm transfer MOPs to the correct government agency.

• Participate in daily systems testing to ensure a high level of systems uptime.

• Any other ad-hoc duties as assigned by your Supervisor and Team leader.

REQUIREMENTS

· At least A Level/ Diploma/Degree holder

· Experience in Customer Service/Call Centre will be an added advantage.

· Excellent verbal and written communication skills and troubleshooting and problem-solving skills to resolve complex issues with little or no supervision.

· Independent, reliable and responsible

· Adaptable and fast learners

· Comfortable with accessing and checking various IT Systems.

*Flexible work schedule: 8.30am-6.00pm / 11.00am-8.30pm /830pm to 8.30am

*4 - 5 days workweek (including one weekend) and work on Public Holiday with scheduled shifts when needed.

*Training will be provided

*Salary range: $2000-$2700

As Sr/Engineer for PDE Technology Development Process Integration, you will be responsible for developing advanced packaging process solution and ensure New Process, New Equipment, New Material and Path finding activities success for NAND, mNAND and DRAM, Controller in Micron. To lead new Technode process readiness and improving the yield, quality and reliability with process characterization and optimization and new materials, machines & technologies introduction. You will need to have understanding of Frontend Process, packaging requirements, chip/package interaction, equipment capability and process technology in the industry and the ability to enable best technology for New Technode & Product Introduction with assembly packaging requirements. You will also be required to drive & collaborate with multi-functional teams to resolve assembly process related problems.

Key Responsibilities

Ensure smooth transition from new process development, 1st qualification success to small volume production launch

• Development and Qualification of new packaging process, material, equipment and technology solutions to meet new Technode (NPI) requirements and schedule
• Perform process TRA, risk mitigation execution and process recipe readiness prior Silicon arrives and ensure 1st pass rate.
• Lead/partner with cross function team/site, to ensure successful transfer to CEM for LVM.
• Qualify new process/technology/equipment/materials
  Implement PDE TD PMI (Product Maturity Index) methodology & provide proper Documentation for product transfer CEM & HVM

Identify path finding opportunities for continuous yield improvement and cost reduction activities

• To understand and be able to integrate process knowledge between upstream and downstream across Si and assembly/packaging process
• Understand the future trend, technology and capabilities required for future packaging solutions, work with teams to put in place new capabilities to enhance process performance.

Provide new solutions on time to meet company and customer needs

• Define, develop and establish process capabilities, strategy and roadmap
  To develop & engage creative solutions for new capabilities or to overcome the identified process constraints, ahead product requirements.

Job Requirements:

• PhD/Masters/Bachelor’s in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• At least 2 years' experience in semiconductor industry
• Experience in Frontend fab Process integration or Module process with technical knowledge on wafer and die level process technology
• Understanding of Micron’s silicon and how it interacts at backend process & package level through CPI is a plus
• Strong project management skills to ensure execution to timelines
• Strong communication and presentation skills
• Understanding of business needs and customers’ requirement
• Ability to integrate & partner with people from cross function teams

Keen on the role? Apply now!

Our company, a Multi-National Aesthetic Brand is looking for a field service engineer as we are expanding further. In this role, you would be working on-site at customer locations to troubleshoot, maintain and repair Lasers and Medical equipment. After some on-the-job training, you would get to put your technical, mechanical and electrical skills to use every day in new and challenging situations while you interact with a wide variety of people, machines and settings.

Job Responsibilities

• System commissioning and installation.
• Adhoc servicing and preventive maintenance.
• Provide excellent customer service, listening carefully to customer concerns and addressing issues until customer is satisfied.
• Update and maintain assigned machines per manufacturer specifications.
• Attend ongoing training events sponsored by company or machine manufacturers to stay up-to-date on the latest technology and repair options.
• Must be willing to travel.

Skills & Qualifications required

• Diploma in Electronics, Mechatronics or related and higher preferred;
• Experience with lasers will be an advantage;
• Ability to work productively with minimal supervision;
• Good communication and customer service skills.

• Assist the Operations Manager/Executive & Building Supervisor on a day to day operations
• Attend to the breakdown of the air-conditioning system, plumbing and electrical issue
• Attend to complaints, calls and queries from tenants on operation related matters
• Troubleshoot some minor technical / facility problems
• Carry out preventive maintenance according to maintenance work schedule
• Conduct daily inspections (checklist)
• Recommend and suggest preventive maintenance or repair to the Operations Manager/Executive & Building Supervisor to minimize emergency breakdown of service
• Carry out joint inspections with the term service provider during the regular servicing
• Supervise to ensure that repair and replacement work are carried out properly by a term service provider or contractor in a timely manner
• To supervise & monitor term service providers & contractors to make sure they comply with workplace safety & health legislation, guideline & code of practice
• To sign off service provider service report
• To assist in Marcom events when necessary such as sound system & lightings
• To call & coordinate M&E breakdown with the service provider
• To inspect daily for units under fitting out during fit-out period and units under reinstatement
• Check the vacant unit/units which are taking-over or handing-over, to draw up technical / building specifications eg. to confirm the electrical / exhaust capacity, water & drainage provisions etc.

JOB DESCRIPTION

· Answer phone enquiries and orders professionally and efficiently with the use of good telephone techniques, customer service, speed and accuracy

· Respond to customer enquiries and provide quotations to customers promptly

· Ensure timely and accurate processing of orders and issue billings accordingly

· Ensure procedures for processing of orders with specific restrictions and that require price approval are strictly adhered to

· Work closely with overseas agent/partner and customer for scheduling of shipment

· Check on vessel sailing schedule, source for quotations, negotiate rates with carrier and co-loader, and confirm booking with carrier

· Follow up and update customer on all shipment details, schedule and status

· Request loading plan from freight forwarder at least 2 working days before vessel expected time of arrival and share loading plan with customer; and coordinate on all loading issues

· Prepare and handle full set of shipping documents including but not limited to submission of dangerous goods form to carrier if necessary, transhipment and export permit, master bill of lading, house bill of ladings, certificate of origin application, tax invoice and arrival notice

· Send stuffing photos, tally sheet, shipping note and final summary to overseas agent/partner

· Arrange for cargo pick up, permit clearance and transfer; and attend to customer queries; and engage haulier services when necessary

· Check commodity harmonized system code if applicable

· Manage and coordinate the flow of information between customers, warehouse and the transport team concerning the status of orders, incoming shipments, arrangement for cargo pick up, engagement of haulier services, unstuffing of incoming shipments, delivery arrangement, wrong orders, returned/damaged goods, unavailable loading bay at customer site, direct reject of orders at point of delivery, etc

· Ensure that critical information with regard to urgent delivery, special timing request are communicated and follow up with the transport team till completion of delivery

· Liaise with customers to evaluate and establish actual reason for direct reject of orders at the point of delivery; and rectify the error when necessary and work with finance to process credit note promptly and accurately

· Work closely with accounts team to:

a. Resolve and reconcile credit note discrepancies against payment made by customers;

b. Resolve and reconcile price error in orders and generate price difference credit note upon receipt of approval from customers and the Company

· Exercise good customer service skill when managing difficult customers and/or customer complaints

· Verify and analyse information gathered from customers’ feedback; and resolve the issues on the spot whenever possible. Otherwise, work closely with the relevant department to ensure customer complaints are appropriately addressed, service recovery are carried out promptly and preventive actions are in place to prevent recurrence of similar issues

· Provide administrative support when necessary and this includes but not limited to filing, data entry, retrieval of documents, etc or any other duties assigned

· Analyse data pertaining to customer feedback and complaints to identify key focus areas; and propose and executive action plans to enhance quality of service, improve process efficiency and service standard so that optimal results are achieved

· Perform scheduled service call to customers semi annually to gather customer feedback and strengthen relations

· Other ad hoc duties as assigned

QUALIFICATIONS

· Minimum Diploma in Supply Chain Management, Logistics or relevant field

· Fresh Diploma/Degree graduates are welcome to apply

· Prior experience in customer service and/or in the logistics industry would be distinct advantages

· Knowledge in import/export shipping procedure, incoterms and documentation are added advantages

· Proficiency in Microsoft Office is a pre-requisite

· Excellent communications and interpersonal skills with ability to build key relationships across all levels with internal and external stakeholders

· Self-starter who is hands-on, motivated, flexible, meticulous, proactive and action driven

· Strong planning, organizing, prioritization and time management skills

· Strong analytical and problem solving skills with ability to identify and assess problems quickly; to apply judgment and recommend solutions within broadly defined guidelines

· A strong team player with commitment to collaborate with other functions of the Company

· Able to multitask and work under pressure and tight deadlines independently

LOCATION OF WORK

192 Pandan Loop #01-02 PANTECH Business Hub Singapore 128381

WORKING HOURS

Monday to Friday : 9am – 6pm

Extended hours depending on the exigencies of service

Where you fit in

Maintenance Reliability Turn Around (MRTA) is about understanding and maintaining our equipment as effectively and efficiently as possible, making sure it performs as intended. The Maintenance discipline covers the development of Maintenance strategies and the planning, coordination, and execution of Maintenance activities. Maintenance ensures safe, defect free and efficient operations through the regular upkeep of equipment and tools in the most cost efficient and timely manner.

What’s the role?

As an Instrument/Quality Measuring Instrument (QMI) Field Execution Engineer/Assistant Engineer, you will be based in Shell Pulau Bukom under Maintenance Department with key accountabilities as the following:

• Provides day-to-day hands-on maintenance and troubleshooting including contractor/ specialist management for all Instrument/QMI maintenance related matters.
• Responsible for carrying out preventive and corrective maintenance works and ensuring plant equipment availability including instrumentation, control valves, analysers and the control system.
• Diagnose and troubleshoot instrumentation and control system malfunctions, ensuring timely resolution to minimize downtime.
• Perform preventive maintenance on instrumentation and control equipment by calibrating instruments, replacing components, and conducting routine checks.
• Develop and implement maintenance plans and procedures to ensure system integrity and performance.
• Analyse and interpret control system data to identify potential issues and optimize system performance.
• Support the development and implementation of upgrades and modifications to the instrument and control systems.
• Compliance to HSSE standards and requirements to make Shell Pulau Bukom a safe place to work, and accountable for all assigned Critical activities.
• Perform Authorized Applicant and/or Authorized Engineer as per Permit to Work (e-PTW) requirement.
• Participate in Asset Management System (AMS) & Maintenance Execution (ME) assessment and determine Instrument/QMI equipment maintenance task and schedule.
• Participate Field Acceptance Test/ Site Acceptance Test (FAT/SAT) and Functional testing to ensure equipment are meeting the design intent when required.
• Perform Instrument/QMI equipment condition monitoring & liaise with relevant subject matter experts (SME)/ specialist/ OEM to address any arising issues, problems & concerns.
• Prepares job specifications and costing for works involved and apply work clearance / permit for work execution.
• Participate and execute for Turnaround (TA)/ Pit-stop (PS) events in related Process Units (PUs).
• Maintains work requests and records on maintenance works using computerized maintenance management systems, GSAP-PM.
• Maintain accurate documentation for instrument and control systems, server systems, and maintenance activities. to ensure all equipment technical records and drawings are updated to reflect the latest changes.
• Contribute to the development of the annual operating budget of the section to ensure achievement operational targets of section.
• Attend Standby Duty callout to an Emergency work upon request

What we need from you

To be successful in this role, you will have:

• Assistant Engineer position: Minimum NITEC Level 2 certification in Instrumentation or Electronics or Electrical
• Engineer position: Minimum Diploma/Degree in Instrumentation or Electronics or Electrical
• 3-5 years of relevant experience in Instrument construction/ Maintenance in oil & gas, chemical/ petrochemical or related industries.
• Knowledge in basic control system and/or functional logic is an advantage.
• Proven ability to diagnose and troubleshoot instrument and control system malfunctions.
• Experience with calibration of industrial instrumentation.
• Understanding of control system principles (PLC, DCS) and communication protocols (OPC, Fieldbus, Modbus, HART, Vnet).
• Able to understand PID and have knowledge of instrumentation and control element
• Basic understanding of server system administration, including troubleshooting and maintenance procedures.
• SAP (GSAP) knowledge in Maintenance Module.
• Experience in field work interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Self-motivated with a strong commitment to teamwork and collaboration and managing contractors and vendors.
• Able to work in Team environment as well as standalone when need arises.

Job Description & Requirements

• 5 years of experience in Helpdesk support, maintenance, and basic infrastructure/network troubleshooting.
• Knowledge of ITIL processes and practices.
• Basic understanding of infrastructure and network concepts, including TCP/IP, DNS, DHCP, and network protocols.
• Strong technical knowledge of desktop operating systems, applications, and hardware.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and customer service skills.
• Ability to work independently as well as in a team environment.
• Flexibility to work outside of normal business hours, if required.

Education Requirement

Relevant certifications such as CompTIA A+, Microsoft Certified Desktop Support Technician (MCDST), ITIL Foundation Certification, or basic networking certifications (e.g., CCNA) are a plus.