PROPERTY MANAGEMENT EXECUTIVE (Facilities Management & Building Service / Up to $4000)

Interested applicants can send your resume to 8739 9469 Janie / [email protected] and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

• Working Location: North / Northeast area
• Office: Ang Mo Kio
• Working days: 5.25 days // 8.30am to 5.30pm + OT, Sat: 8.30am to 1pm + OT
• Basic: $2500 to $4000 (depends on experience)

Job scope:

You will work closely with the Property Manager to provide excellent support to estate residents in executing daily estate inspections to ensure high quality standard of horticultural, maintenance and implement improvement works. In addition, you would need to manage and attend to residents/tenants’ feedback as well arrears cases.

Requirements:

• Min Diploma in Real Estate/Facilities Management/Building Services, Mechanical or Electrical Engineering or equivalent
• Able to work under pressure and work beyond normal working hours and on weekends/public holidays.

Fun Jia Jia (Janie) | Reg No: R22107945

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

• Carry out product engineering duties for integrated circuit (IC) products throughout all stages of product development and manufacturing.
• Collaborate with production test engineers and/or relevant stakeholders to maintain and enhance the program and hardware of existing products.

Requirements:

• Degree in Electronics Engineering or equivalent.
• At least 5 years of experience in Product Engineering.
• Proficient in Tape-out procedure, CMOS device, and IC process.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Job Descriptions:

• Manage and work with project team to assigned project(s)
• Perform engineering duties such as engineering calculations, planning, tender, estimates, costing, taking off measurement. Preparation / Evaluations as part of the engineering project team
• Update projects monthly report and assist on progress claims, progress payments and finalization of accounts
• QA/QC documentation review of engineering deliverables
• Liaison with clients, project managers, consultants, contractors, and other stakeholders who handling the project matters
• Any other required duties as required by the Project Team
• Suggests ways to increase revenues and efficiency
• Interpretation of specifications, terms and conditions, drawings and any other relevant documents
• Carry out testing and commissioning of M&E installations
• Assist the site team on obtaining Variation Orders (VOs), Value Engineering, Recruitment
• Other scope of work assigns by the Senior Project Manager / Project Director

Requirement:

• Any qualification in a relevant engineering field with minimum 3 years of related working experience in the Mechanical & Electrical
• Possess knowledge of all cabling, loading and sizing calculations and equipment selections such as cable, generators, panels, etc.
• Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications
• Tendering and Estimation is a must
• Having experience working with Electrical, Fire Protection & Solar Projects would be an added advantage
• Candidates from the same industry will be highly preferred

Wecruit Pte Ltd | 20C0270

TEW JIE WEI | R22106822

• Undertake all stages of Projects, from start to end.
• Calculate quantity of material for the whole project.
• Timely coordination and follow up with the Plumber/ Main-contractor or Consultant.
• Preparation of Shop Drawings, Beam Penetration Drawing.
• Submission of the relevant documents (Risk Assessment and Safety Work Procedure, method statement, material catalogue) as required by the Site Main Contractor.
• Co-ordinate with the Project Manager, Project Engineer and/or Project Supervisor on the projects and emails, support sites with drawings and details.
• Co-ordinate and resolve all technical problems from sites.
• Attend major site meetings, Testing and Turn-on.
• Update drawings as required.
• Perform regular updates on project status for meetings.
• Track progress of sites.
• Co-ordinate with all other Engineers and Supervisors for site progress, logistics and manpower scheduling.
• Liaison with clients for remote trouble shooting and advice in servicing and maintenance
• Assist in scheduling Service Technicians and manpower coordination
• Assist in document submissions and controlling
• Tracking and follow-up for every service and maintenance cases
• Review project schedules and ensure timely submission of documents to Authorities.
• Ability to work closely with Engineer for various Project phases.
• All drawings and correspondences must be well documented.
• Any other ad-hoc duties as and when instructed by Management.

Job’s Holder Specification

Possess a Diploma in Civil/Mechanical Engineering.
Proficient in MS Office and AutoCAD.
Lots of initiative and excellent organizational skills.
Must possess integrity and drive.
Ability to withstand emotional distress and work pressure.
Possess excellent interpersonal skills- to deal with customers and external contacts.
Good team leading skills.
Ability to make good decisions.

Possess class 3 driving license

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Essential Responsibilities:

As a layout and circuit Failure Analysis Engineer your responsibilities include:

• Digital / Analog design and layout analysis
• Simulation and debug on circuit design
• Studying and being proficient in PDK (process design kit), tech files and other design collaterals for advanced technology nodes
• Working closely with product engineers and failure analysis team to investigate and resolve yield issues through Circuit/Layout Design Diagnosis
• Evaluating and enhancing the capabilities of Circuit/Layout Design diagnosis

Requirements

• Bachelor/Master’s in Electric Engineering (Preferred specialization in design).
• Familiar with Circuit Design and Layout related EDA tools (Virtuoso, Calibre, Layout editor, Avalon, Lavis, etc).
• Familiar with Electrical parameters, IC testing, Fault diagnosis/Failure analysis techniques.
• Semiconductor processing knowledge/experience/understanding are preferred.
• Excellent data analysis and problem-solving skills.
• Strong interpersonal skills and ability to work effectively within a cross functional team environment.

Responsibilities

• Support Asia region (Air-con / Chiller) business
• Have basic knowledge of design, installation, overhaul, start up, service, maintenance jobs on the project
• Work closely with stakeholders across Sales, Engineering, service team to successfully award and manage project
• Apply interdisciplinary engineering expertise to provide technical leadership to regional sales team and service team
• Demonstrate responsiveness to the customer (internal and external) and be quality minded in performance of all duties
• Mentor and coach product sales and service team members with a passion for organizational development
• Responsible for training and development of the staffs in Asia
• Exercise strong communications skills to support highly effective cross functional coordination and collaboration

Requirements

• Bachelor's Degree in Mechanical Engineering or equivalant study
• Min 5 years of engineering work experience is required
• Experience with Chiller / Refrigeration/ Air-con systems is required
• Ability to travel when required

Interested candidates kindly APPLY or send in your resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Daniel Lee / EA Reg No : R1989151

Our client is a Manufacturing MNC, one of the leading players in the Contract Manufacturing sector. Due to business needs, they are now recruiting a Process Engineer (Molding) to be part of their Engineering team for ongoing transformation projects. They are located in the North – easily accessible.

Duties & Responsibilities:

• Monitor all technical and process activities in molding operations
• Responsible in troubleshooting on molding processes and machines
• Supervise and plan on-the-job training for Technicians
• Establish and execute all corrective and preventive actions for discrepancies and potential problems
• Responsible in Programs and System development

Requirements

• Diploma or Degree holder with relevant experience.
• Experience in molding processes

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

Responsibilities:

• Responsible for managing and writing of qualification related documentation but not limited to Qualification Plan and IQ, OQ, PQ and ERES Test Scripts for QC laboratory equipment (lab bench and CSV system)
• Responsible for overseeing execution of but not limited to IQ, OQ, PQ and ERES Test Scripts of QC laboratory equipment (lab bench and CSV system) and test script for new equipment deployments.
• Manage and maintain the progress tracking matrix on document generation, qualification execution, document review and approval. Escalate the issue/delay to management team.
• Coordinate and manage deviation to be initiated, assessed and closed out in timely manner.
• Responsible for stakeholder management including coordination with QC lab team on equipment availability for qualification activity.
• Responsible for all other activities related to qualification activities but not limited to change control, tag out, PM/Calibration program, equipment configuration, SOP generation.
• Work with IT team to develop the CSPECs, ERES etc to fulfill Part 11 requirement.
• Responsible for managing computerized system validation lifecycle data integrity portion and risk assessment.
• Handover and coordination post LEQ execution to QC lab
• Any other task as assigned by Supervisor/Manager

About You:

• Bachelor in Engineering, Sciences, Business, Information Systems or equivalent. Min 5 years of experience in QC Lab Equipment Qualification in pharma or biotech facility.
• Knowledge of current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP) in a pharma or biotech facility
• Good interpersonal, communication and presentation skills.
• Must be a self-starter, fast learner, curious with strong analytical and organizational skills
• Self-motivated and willingness to learn
• Reliable and Responsible

Job Type: Contract

Schedule:

• Monday to Friday

Experience:

• QC Lab Equipment Qualification: 5 years (Preferred)
• Pharmaceutical Industry: 3 years (Preferred)

Job Title: Assistant Engineer - Testing and Commissioning of Communication Systems

We are currently seeking a highly motivated and skilled individual to join our team as an Assistant Engineer in the field of Testing and Commissioning of Communication Systems. This is an excellent opportunity for individuals looking to grow their career in a dynamic and fast-paced environment.

Responsibilities:

• Assist in the testing and commissioning of communication systems, including but not limited to telecommunication networks, radio systems, and data transmission equipment.
• Collaborate with the engineering team to perform quality checks, troubleshoot issues, and ensure proper functionality of communication systems.
• Conduct tests, inspections, and evaluations of communication equipment and systems to verify compliance with specifications and industry standards.
• Document test results, generate reports, and maintain accurate records of all testing and commissioning activities.
• Assist in the installation, configuration, and maintenance of communication systems as required.

Requirements:

• Educational qualification in Electrical Engineering, Telecommunications Engineering, or a related field.
• Prior experience or knowledge in testing and commissioning of communication systems is preferred.
• Strong analytical and problem-solving skills with attention to detail.
• Excellent communication and interpersonal skills to collaborate effectively within a team environment.
• Ability to work independently, prioritize tasks, and meet deadlines.
• Proficiency in relevant software tools and testing equipment.

We offer competitive compensation and benefits packages, along with opportunities for professional growth and development. Join our team and be part of a company at the forefront of communication system advancements.

To apply, please submit your resume, cover letter, and any relevant certifications to [[email protected]]. Kindly include "Assistant Engineer" in the subject line.

We appreciate all applications, but only shortlisted candidates will be contacted for further consideration. Thank you for your interest in joining our team.

Field Service Engineer

We are looking for experienced junior and senior full-time Field Service Engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Our client is a well-established MNC, market leader in the Water industry. They are looking for a Procurement Engineer to assist their Procurement team for the next phrase of their business. They are located in South – easily accessible. This Procurement Engineer would be responsible for :

• Responsible for vendor management to ensure approved vendors meet the delivery, quality and cost standards
• Responsible for the negotiation to ensure and improve suppliers' price competitiveness, lead-time and on time delivery
• Ensure all necessary documents are in place
• Responsible to provide customers with solutions and internal cross functional teams, for cost effectiveness
• Responsible for materials planning
• Liaise with forwarder for shipping arrangment

Job Requirements:

• Diploma / Degree in any discipline
• Minimum 3 years of relevant experience in Oil & Gas industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

· Nearest MRT is Tai Seng

· Yearly increment to combat inflation minimally and could be more dependent on performance

· Base salary dependant on experience and skillsets

Responsibilities:

· Lead, supervise, and coordinate a skilled project team.

· Manage all technical aspects of projects to ensure quality and compliance.

· Oversee day-to-day operations, meeting project time, budget, and quality requirements.

· Attend meetings with clients, consultants, sub-contractors, and site authorities.

· Foster close collaboration with architects, consultants, and sub-contractors.

· Ensure strict implementation of on-site safety practices and corporate WSHE standards.

· Continually assess and optimize construction activities to meet safety and quality standards.

· Proactively identify and address risks and challenges during project planning and execution.

Requirements:

· Diploma or Degree in Civil Engineering.

· Minimum of 5 years' experience in project management, preferably with landed properties.

· Exceptional project management and leadership skills.

· Strong technical knowledge of civil engineering principles and practices.

Apply now: https://www.careers-page.com/tyson-jay/job/L753Y3XX/apply

Rexy Manpower Supplies Pte Ltd | EA License No.: 16C7954

Lim Kong Wei, Ivan | EA Personnel No.: R1109856

• Supervise and oversee the sequencial activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL' s Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.
• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site
• Communicating with Project Management Team/QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works
• Assist with the management of internal and external third party interfaces.

CFB Bots Pte Ltd is a technology service provider specializing in Intelligent Automation. We partner with large enterprises in their Digital Transformation journey and help them and their employees thrive in the Future of Work. Our mission is to co-create the Digital Workforce of the Future, and our vision is to make work enjoyable. For more information, please visit www.cfb-bots.com.

About the Role

We are expanding our operations, and are looking for a Python Engineer to join our team. You will work closely with our clients to implement Python-based RPA solutions within their organizations.

Job Description:

• Conduct meetings to understand the clients’ current work process, pain points, and automation requirements
• Analyse and document business processes, identify areas for optimisation and provide technical solutions
• Construct and implement the overall architecture and design across various systems and applications
• Design, build, and maintain efficient, reusable, and reliable code and automation scripts
• Create and maintain project documentations
• Perform end-to-end testing, troubleshooting and end-user support
• Work on projects and fulfil any other duties diligently as and when assigned by superior

Requirements:

• Degree/Diploma in Computer Science, Information Technology or other related discipline
• At least 2 to 3 years of software development experience using Python
• Familiarity with the Software Development Lifecycle
• Good programming, designing, coding, testing and debugging skills
• Strong logical approach and problem-solving skills
• Passionate about programming and pro-active in finding effective and scalable solutions
• Ability to multi-task and thrive in a fast-paced and dynamic innovation environment
• Good team player with customer centric mindset

Customer service officers required for beauty spa industry

• 5 branches around Singapore, all are located near MRT
• 5-7 days off per month
• Work retail hours, no OT required
• Customer service oriented
• No experience welcomed

You may visit our website @ www.haach.com for more information on our brand.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Responsible in designing and developing new control systems, which can be complex in nature necessitating the expert application of engineering knowledge and control disciplines such as process control, programmable logic controllers (PLC), and supervisory control and data acquisition (SCADA).
• Responsible to prepare, review and approval of drawings, instrument lists, data sheets, elect diagrams, control architecture, logic diagrams, operating procedures
• Responsible to plan and self-monitor daily engineering and design work assignments
• Responsible in controling and monitoring job costs and schedules to meet completion dates, customer technical specifications and internal technical specifications
• Responsible in developing and using engineering standards (electrical, instrument, etc.), procedures and forms for engineering design and production fabrications.
• Responsible in providing engineering advice and support to engineers and Project Managers.
• Responsible in preparing FAT procedure and test Control system
• Responsible in conducting training on plant operation & maintenance.
• Responsible in performing plant start-up & commissioning/ troubleshooting.
• Responsible in representing the company for customer discussions and technical reviews

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5-8 years of relevant experience
• Knowledge of Microsoft Office and AutoCad
• Knowledge of PLC programming experience is a bonus
• Prior experience with SCADA system is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Key Responsibilities

• Kitchen duties, prepare serving points and serve customers
• Prepare beverages, fruits, vegetables and serving points
• Dish out, replenish food during meal time, serving and out-ration
• To collect food samples after each meal
• Wash and clean utensils/ cutleries, serving counters, dining area after each meal
• Other duties that Company deem relevant may also be assigned

Key Requirements

• At least 1 year(s) of relevant working experience
• Valid food hygiene certification

If you fancy a cool, easy-going atmosphere full of dynamic and spirited individuals, you are at the right place.

We are on the lookout for passionate, optimistic and fun-loving people to join our big family of Wonderful People.

With our wide array of hotels and brands, there are countless opportunities and exposure to work in different stories. You will be immersed with prospects in career and learning development, employee recognition, mentorship and benefits even when you travel.

Job Details (Here’s what you can expect!)

• You get to travel and work in our 25 hotels in Singapore
• Duty meal allowance
• Uniforms provided
• Attractive incentives and bonus
• Staff rates at Accor hotels in Singapore and worldwide

Job Responsibilities:

• Attend to complaints/reporting of breakdown of services within the hotel premises
• Diagnostic testing and inspection for all electrical and mechanical equipment, sanitary and plumbing system and arrangement of faulty items for repair work
• Diagnostic testing and inspection of air-conditioning system
• Any other ad-hoc duties assigned

Job Requirements:

• 1 to 2 years working experience, preferably with relevant hands-on experience in building related or hospitality industry
• Must have Class 3 driving license
• Resourceful, proactive and team player
• Good interpersonal and communication skill

Olam Fund Management is the fund management arm of Olam International Limited (Olam). Olam is listed on Singapore Stock Exchange and is leading agri-business operating from seed to shelf in 65 countries, supplying food and industrial raw materials to over 13,800 customers worldwide. Our team of 23,000 employees has built a leadership position in many businesses including cocoa, coffee, cashew, rice and cotton.

OFS’s fund management business is engaged in building Quantitative Trading Strategies (Quant Fund) and Agri fundamental trading Strategies (Fundamental Fund). These combine our experience and insight in commodity/financial markets with our knowledge of derivatives and statistical and mathematical skills built over the years.

The quant fund team manages proprietary systematic trading strategies in global markets across all major asset classes (equities, fixed income, commodities, and currencies).

We are looking to hire a Data Engineer to support our ambitious growth plans.

RESPONSIBILITIES:

· Work closely with the business e.g. Traders, Quants and technology teams and assist in the gathering of business requirements.

· Skill and acumen to handle large amount of data with varying frequency and structure.

· Good at handling implementation of data pipelines, using ETL tools , ensuring data quality and persisting in efficient manner.

· Design solutions, implement them, and provide post implementation support.

· Work in an Agile and Scrum methodology: TDD, Test Driven Development, Automated Testing, Continuous Integration Automated Deployment, Pair/Peer reviews.

· Define objectives by analyzing user requirements; envisioning system features and functionality.

QUALIFICATIONS:

· Bachelor degree or equivalent in computer science or a related field.

· Experience doing Test-Driven Development, functional testing and continuous integration.

· 4+ years of relevant Python, java, relational and No SQL database experience.

· Knowledge of Kafka, Spark, Airflow, Postgres DB.

· Python experience preferred. Experience in other OO languages be acceptable.

· Experience with relational database, preferred Postgres.

· Strong written and verbal communications required.

Senior Cyber Security Engineer (Data Loss Prevention - DLP)

A Cyber Security firm is expanding their operations in Singapore and are actively seeking for qualified cyber security software engineers to join their growth.

Training will be provided by leading security providers to get up to speed on current projects.

The Opportunity:

The Senior Cyber Security Engineer will have the opportunity to work on high-profile projects. Such projects will require overseeing and managing security solutions across the end-users. You will gain valuable hands-on exposure to various security solutions across various businesses.

What we look for:

• Degree or Diploma in Computer Science, Information Technology, Information Security, Computer Engineering or equivalent
• Demonstrate a good level of understanding of cyber security operations
• Can show an ability to resolve technical problems
• An ability to manage and execute requirements such as the implementation, integration and upgrade of security solutions
• Gained at least 1-Security Certifications (i.e., CISSP, CISM, Certified DLP professional and etc) would be an advantage
• Ability to provide solutions and recommendations on projects
• Strong technical knowledge and hands-on experience with leading DLP platforms such as Symantec DLP, McAfee DLP, or Forcepoint DLP.
• Has experience in deploying DLP policies, rules, and alerts within network and endpoint platforms to safeguard sensitive data.
• Possesses background aligning DLP strategies with compliance requirements by collaborating with legal, IT, and other cross-functional teams.
• Ability to work independently on projects, project management, problem solving and ability to communicate well
• Singapore based

What is on offer:

• High-profile projects
• Full-time opportunity
• Comprehensive training provided to joiners
• Flexible work environment
• Competitive remuneration and benefits

What’s next:

If you are interested to join this Cyber Security firm and to be an integral part of their growth then we would like to hear from you.

Full support and training will be provided to meet your career objectives.

Please reply directly to this posting with your CV or send us your details to [email protected]

We apologise that due to the high volume of applicants we may be unable to respond to everyone. Should you not hear from us, please assume your application was unsuccessful for this time round and good luck for the next.

Engage Group Cyber (Singapore)

[email protected]

Engage Group Pte.Ltd is a licensed business under the Ministry of Manpower: (EA: 18C9316)

• Prepare laboratory analysis, failure analysis reports.
• Conduct engineering failure analysis (FA) and materials-related testing to identify root cause of failures.
• Conduct polymer characterization tests on construction material (sealant, waterproofing membrane, etc.) such as thermal analysis, material type identification, material composition analysis.
• Ensure laboratory instruments and equipment are properly calibrated and maintained to meet relevant quality standards.
• Manage lab operation and supervise a team of five technicians.
• Process owner for ellipsometer, furnaces, auto titration, IRLST and uPCD.
• Implementation of physical testing techniques and standard operating procedures.
• Conduct investigation and report any deviation of lab measurement.
• Monitoring stability of tools and processes by using SPC.
• Document review of FMEA.
• Conduct calibration and GRR of tool.

Requirements

• Min Degree in Chemical/Chemistry/Applied Science Engineering or it's equivalent
• Experience in any Laboratory Equipment from Semicon/Manufacturing Company
• At least 3 years related working experience in semiconductor environment
• Able to work in a team

Interested candidates who wish to apply for the advertised position, please forward your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description

• Gather inputs on design requests from Engineering Managers.
• Discuss design schemes, seek clarifications and provide information about engineering design aspects.
• Prepare drawings / sketches with CAD team and resolve queries.
• Approve final drawings, prepare design calculations and present to Engineering Manager.
• Review, interpret and report results of all geotechnical instrumentation in accordance with the Instrumentation & Monitoring Generalised Plan of Action.
• Guide engineers to execute design requests from Engineering Managers.
• Develop and maintain design management tools for tracking, reporting and monitoring the progress and delivery of design packages.
• Identify design delays at the earliest stage, investigate causes and proactively seek to mitigate any adverse impacts on procurement, fabrication, and construction.
• Verify permanent works designs meets Client’s specifications.
• Liaise with the Client/Engineer and external parties for their feedback where applicable.
• Monitor progress of work, check design for completion and efficiency by reviewing design calculations.
• Review all designs for compliance with engineering principles and relevant design codes.
• Ensure that all drawings are in adherence with CAD standards and company’s operating procedures.
• Proactively seek to optimise temporary works solutions, by eliminating risks during construction, maximising temporary works reuse and ensuring practical constructability.
• Collaborate with designers and site operations teams to seek consensus on engineering solutions.
• Conduct engineering reviews for tenders, post award / permanent works design by external consultants.
• Engage with consultants, provide inputs, and seek clarifications.
• Address critical concerns, resolve issues and provide solutions to Engineering Manager.
• Facilitate collaboration between stakeholders to complete engineering design reviews and enhance efficiency.

Requirements

• Total relevant experience: 3 years
• Knowledge of Civil and Structural Engineering and Design (LTA projects experience preferred)
• Knowledge of temporary and permanent works design in mega project size
• Competent in planning and organizing work schedules and a demonstrated ability to deliver on time
• Strong and clear communication skills with proven ability to engage with Engineers and stakeholders