Responsibilities

• Assist in scheduling of future appointments
• Registration of patients
• Assisting the doctors and nurses in basic medical care if needed
• Data entry of patient’s particulars into the hospital system
• Handling phone calls and enquires and providing information
• Other ad hoc duties as assigned

Requirements

• Min GCE N/O or ‘A’ Levels / Diploma and above
• Keen interest in the healthcare/ medical industry
• No experience needed, full training will be provided
• Basic knowledge of Microsoft Office
• Able to start work immediately

Interested candidates please send a copy of your resume to [email protected]

Email Subject: Patient Service Associate

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Overview

MOSFET IGBT engineer/ technical expert (design, manufacture)

There are multiple component development bases in China, and you are required to assist and support the R&D team in China to carry out development work after joining the company.

Description

1. Design/ Development

Use simulation software and layout software to design the structure of the corresponding product, and design the composition of the manufacturing process.

2. Manufacture

Conduct DOE design, identify manufacturing process, and conduct quality evaluation. Cooperate with chip factories to develop, and conduct new product verification such as testing finished products and verification.

3. Quality evaluation

Analyze and organize test data, and apply the technology under research and development to new product development and intellectual property rights.

4、Others

Provide technical support for the company, but also need to assist in various identification and management work.

Experience & abilities required

・Relevant development experience in 6-inch and 8-inch Shield Gate Trench MOSFET, Super-Junction MOSFET IGBT

・3+ years of experience in semiconductor design or manufacturing

・Can use English as working language

・Good logical thinking and communication skills, work hard and have a sense of responsibility for work

・Experience in using simulation software and layout software is preferred

・Experience in IGBT MOS product development, or work experience in semiconductor companies is preferred

ARTICARES We are leaders in innovative medical technologies including human like decision-making robotics and artificially intelligent solutions that facilitate personalized rehabilitation after injuries such as stroke, dementia, and accidents – a common occurrence in aging population. Our solutions are the outcome of strong collaborations between experts in medical and engineering fields, validated by clinical studies, and made available to you by people who care about making every step of patients’ rehabilitation journey a bit easier. Today, we are one of the fastest-growing companies in this field and our solutions are deployed in major healthcare institutions in Singapore, APAC & EU.

We combine our innovations with out-of-the-box business offerings for providing comprehensive support throughout the hospital to home journey of patients. We are looking for a business development specialist who has the energy and skills to directly and in collaboration with our partners to ensure successful entry of our solutions in international and local markets.

Position/job title

Mechanical Design & Manufacturing Engineer

We are seeking for a profile with demonstrable technical background in mechanical design and manufacturing, particularly of robotic medical devices, to play role in transforming ideas into our products and solutions. In addition to growing together with us in rapidly expanding medical rehabilitation sector, playing this instrumental role would make you contribute to society by driving the realizations of innovative robotics as well as artificial intelligence for better future of rehabilitation.

Official Duty Station

Singapore

Roles & Responsibilities

· Assess requirements then transform into preliminary designs, prototypes, FAs, and final product (production-ready)

· Define and execute the qualifying criteria of every development stage.

· Coordinate production for delivery to customers, both internally and with manufacturing partners.

· Perform stringent risk and root cause analyses to ensure high-quality.

· Optimize development’s and production’s processes as well as costs.

Requirements

· Solid ownership, user-centred, and quality oriented.

· Solid experience in designing robotic device/mechatronic system.

· Proficient in DFMA for machining and soft moulding.

· Proficient in kinematic/motion analysis.

· Proficient in SOLIDWORKS.

· Bachelor’s degree in mechanical engineering, manufacturing, or related fields.

· Any of the followings would be plus:

o Experience in designing and manufacturing consumer products.

o Proficient in converting non-parametric model to parametric model.

o Experience in selection of DC motors

o Hands-on experience in complying with ISO 13485 QMS.

o Hands-on experience in complying with IEC 60601-1.

• Food and drinks preparation, making toasts, beverages and cashiering duties
• Provide good customer service
• Stock taking, general housekeeping of store

Requirements:
• No prior experience required. Students on holiday welcome to apply.
• Self starter, enjoys customer service and keen interest in F&B

Benefits:
• Part-Time: S$8 to $10 per hour onwards
• Full-Time / Contract: 5 days work week (Office hours, PH and Weekends Off)

Working location: Novena

OTSAW Digital is seeking creative, energetic well-rounded Robotics Software Engineer to work in the field of autonomous robot technology. You will be responsible for integrating and testing software solutions in simulation and on the robot. We are looking for engineers who are interested in tackling challenging problems for our robots. At OTSAW Digital, we want people with passion. We want innovators. We want people who can collaborate and bring us a creative future. So, if you are passionate about working in a startup, want to solve hard problems and make cool robots with us, please apply.

Responsibilities:

Research and Develop OTSAW software system. The engineer will be assigned to lead initiative related to one or a few of the following domains:

Perceptions

· Improve usability, reliability and scalability for mapping and localization system.

· Improve object detection, tracking & classification system.

· Improve Sensor fusion algorithm for reliable, precise localization, object tracking.

Control and Planning

· Embedded System – low level interfacing with sensors, actuators.

· Robot control system, low-level motion planning algorithm.

· Behaviour planning – path planning & mission control.

· Fleet Management coordination and planning

· Simulation – for testing of robot behaviour & path planner.

Requirements:

· Min. education qualification: Bachelor Degree in Robotics Engineer, Computer Engineer, Electrical Engineer or other Engineering related course

· Strong theoretical & practical experience in developing perception and/or control algorithm

· Demonstrate deep interest & understanding in relevant domain of interest

· Experience in developing on actual physical robot

· Experience in C++, Python, ROS, Git

• The main point of contact for users and business partners, addressing their inquiries and concerns through phone, email, and chat.

• You'll proactively work with various operation teams to resolve issues.

• Your role will involve providing accurate and detailed information about our exchange services, including investment products, trading platforms, and account features.

• You'll assist clients with account-related activities like opening accounts, transfers, deposits, withdrawals, and more.

• In case of client complaints and issues, you'll resolve them in a timely and professional manner, escalating to higher management or other departments when necessary.

• You'll be responsible for maintaining client records and updating account information in our CRM system.

• Collaborating with internal teams, you'll focus on continuously improving customer service processes to enhance the client experience.

Who We're Looking For:

• Min 1 year prior customer service experience, preferably within the financial services industry or a related field

• Ability to work both independently and as part of a team

• Strong communication skills, with the ability to explain complex financial concepts to clients

• Experience with Zendesk, Livechat, and digital servicing channels is a valuable advantage

• Proficiency in both spoken and written English and Mandarin

What do we provide:

• Competitive salary + bonuses

• Various Benefits and support, including Annual Leaves and Sick Leaves

• We provide you with assistance, opportunities for skill development, mentoring, and training programs to help you succeed

• Global working environment: Advance your career by interacting with individuals from various backgrounds, cultures, and nations

• Flat organizational structure that encourages open communication and teamwork

If this sounds interesting to you, apply to find out more!

Customer Service Officer responsibilities include responding to customer service inquiries, finding appropriate solutions, and updating customer accounts or services.

Responsibilities

• Being the first point of contact for our clients/guests, candidate act as the fitness club gatekeeper.
• Greet customers warmly and ascertain problem or reason for calling with an enthusiastic attitude.
• Work well with fellow customer service officers and Front of House Manager to ensure exceptionally high standard of service is being delivered.
• To handle cashing duties and account for transactions.
• Create and maintain good and friendly customer relations with members and guests.
• Issuance and recording of equipment and items loaned to members and guests.
• Ensure that the lounge and private room is ready for use when booked and closed after members have vacated the premise.
• Get members to register for upcoming events / competitions.
• Oversee and manage the corporate events at the Karaoke Lounge.
• Positive attitude and team player.
• Night shift 5PM-3AM

KEY RESPONSIBILITIES

· To deliver quality and high standards of service to customers

· To handle customers’ enquiries and take orders

· To perform basic cashiering duties

· To scoop and serve gelato and beverages to customers

· To replenish merchandise on the display shelves and counter whenever necessary

· Ensure safe storage of all products in the storage room and sales floor

· To perform general housekeeping to ensure and maintain the cleanliness of the area at all times

· Any other ad-hoc duties as and when assigned by the management

REQUIREMENTS

· Minimum 'N' and below; and 1 year of experience in the same capacity within the retail environment

· Must be able to do heavy lifting of at least 10kg

· Able to commit retail operation hours

Able to commit on weekends, public holidays and overtime as and when required

Description:

• Enrolment of patients
• Appointment booking for patients
• Generate and collation of reports
• Patient interaction

Requirements:

• Min. N/O/A levels
• No exp. needed, training provided

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Founded by Temasek & UST, Temus is a start-up on a mission to empower Singapore’s Smart Nation and enhance the lives of citizens.

Our services span from strategic advisory through to digital, data and AI delivery. We work across a wide variety of use cases from financial services, sustainability and environmental science to research, health and public sector. Our focus is on harnessing disruptive innovation to unlock economic and social value enabled by technology.

We are growing quickly, and we are recruiting strong and highly motivated people to join us on this mission.

Key Roles & Responsibilities:

Purpose

• Place client value and human experience at the center of everything we do
• Develop and deliver value to clients by building large scale enterprise data pipelines to capture, transform and store date to support reporting, automated systems and AI/ML Team
• Be a part of a world-class team of experts in Data engineering
• Be a part of a culture of excellence and with confidence, charisma, context, and humility, working effectively at all levels

Delivery

• Delivery of data pipelines to drive material impact and drive disruptive transformation across our clients in public and private sectors
• Support thought leadership development as a team for data engineering and scaling deployments

Partnership

• Work with Temus’ ecosystem of partners to deliver client value
• Adopt a cloud-first strategy to enhance agility and elasticity by partnering with vendors to support specific public sector needs

Requirements:

• Minimum 4 years of designing, building and operationalizing data solutions and applications (with batch or streaming data)
• Hands-on experience with Databricks including setup, configuration, administration on cloud infrastructure followed by on-boarding data sources, building data pipelines and data assets for downstream consumption
• At least 3 years of experience with AWS cloud data platforms (S3, RDS, Glue, Redshift, …)
• Proficient in at least one core language: Python,.Net (C#)
• Experience with setup and administration of Tableau server is an added advantage
• Knowledge of Kafka for data streaming (producer, topics and consumers)
• Excellent understanding on SQL data storage structures and storage/query optimizations
• Mastered SQL querying to build any data presentations using joins, reference tables, groupings, statistics etc.
• Exposure to concepts like Serverless computing, CI/CD, Containerization, Infrastructure as Code, code version control and automated testing
• Strong ability to communicate with a broad range of clients, colleagues, and partners across a variety of contexts and formats.
• Strong ability to develop and maintain relationships amongst clients, colleagues, and partners
• Show active tracks of improving knowledge and skills (e.g. courses, podcasts, books, experimentation, open source volunteering, tech meetups etc.)
• Ability to work independently with minimal guidance
• Ability to work as part of a large team
• Ability to work within an unstructured environment with ability to multitask well

Equal Opportunities

Temus is an equal opportunities employer. We welcome applications from all. We do not discriminate by race, religion, belief, ethnicity, origin, disability, age, partnership status, sexual orientation, or gender identity.

We see the diversity of our team as a strategic advantage, and we work actively to maintain it.

By applying for this role, you have read and acknowledge the data privacy statement via this link - temus.com/job-applicant-data-protection/

The main role for Proposal Engineer is to prepare company's product/equipment technical proposals, primarily for Surface / Subsea completion systems.

KEY RESPONSIBILITIES, DUTIES, & ACCOUNTABILITIES:

1. Prepare and evaluate technical proposals and tenders in accordance with ITT guidance.
2. Review of all information relating to bid, clarification of response receivedfrom client and internal support departments.
3. Coordinate client responses to all technical queries during the bid andafter bid period.
4. Prepare all associated technical / required documentation from beginningof bid to support the sales coordinator.
5. Prepare cost and work closely with sales coordinator / appropriate departments to ensure target dates are met.
6. Obtain factored / sub supplier costs where necessary in support of tenders

REQUIREMENTS:

• Preferably with Degreee in Mechanical, Industrial, or Chemical engineering background
• Good communication and interpersonal skills
• 4-5 years’ experience in reviewing RFQ (bid documents) and making technical proposals in an oilfield manufacturing environment, preferably working in Subsea/Surface completion systems

Employment type: Permanent, Full Time

Working Hours: 44hrs per week. 8.00am - 5.15pm, Mon- Fri

Work location: Tuas

Transport assistance:

Company has communal transport every day with 2 way pick up from specific pick up/drop off points (Jurong East, Choa Chu Kang, Jurong West and Yew Tee areas)

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Prepare, check/review, approve conceptual studies, designs and detailed project drawings, proposals, design criteria & specifications, project budget and schedules

Prepare quantity take-offs, cost estimates and staffing forecast for all phases of project and manage change orders

Deliver project adhering to quality norms, timescale and budget

Supervise, guide and mentor the project team and provide input for their performance evaluation

Support creation of a work environment that fosters openness, trust, communication, teamwork, empowerment, innovation, and satisfaction

Provide technical leadership and invest in developing capabilities of the team members

In-depth knowledge of road alignment, geometric design, junctions, roundabouts and interchanges and flexible/ rigid pavement design

Exposure to traffic engineering will be an added advantage

Prepares or assists in preparation of conceptual studies, designs, reports or proposals, design criteria, specifications, budget and schedules for projects of varying complexity

Perform the finite element modeling and structural analysis of various steel and concrete structures

Establish, track, and monitor material key quantities

Develop and update job execution plans

Develop and build external relations with client representatives, vendors, and subcontractors and interface closely with other discipline functions promoting Client Service Excellence

Review and approve vendor lists, prepare quotation requests/bid tabulations/purchase orders and review substitutions for technical acceptability

Establish and lead the squad check effort for vendor equipment documentation for assigned equipment

Support proposal and estimate activities

Execute project work in accordance with approved Activity Plans

Engage Fluor’s global community, promoting a OneFluor mindset

Monitor and support work performed by Fluor offices or other designated entities performing Distributed Execution Engineering

Direct and oversee audits

Create system and equipment designs that meet our customer contractual requirements and location specific codes and standards including, but not limited to ASME/ANSI, IBC, UBC, CSA, European Union Directives

Adhere to industry codes and standards department practices and procedures

Provide Engineering input to drafting team members to support creation of design drawings, bills of material (“BOM”s) and other design documentation

Review and approve completed design drawings and BOMs prior to issuance

Lead internal and supplier design reviews

Apply lean 6-sigma tools and methods to achieve cost effective, balanced designs

Perform mechanical, structural, or civil analysis as necessary to support new designs or improvements to existing designs

Drive effective solutions for emergent issues, with appropriate sense of urgency

Ensure timely completion of engineering activities within schedule objectives that meet internal and customer needs

Create new designs that meet safety, reliability, performance, maintainability, and cost objectives

Provide engineering inputs and solutions during all phases of design development and project implementation

Provide ad-hoc expertise during project execution to mitigate risks and generate opportunities

Initiate and or participate to Interface, co- engineering Meetings, design freeze sessions with other Team Members

Control and monitor design changes and design budget deviation

Report to Program Element Description (PED) and Civil Works (CW) Project Management (PM) during the course of the project

Preparing cost estimates, permit applications, plans and specifications, feasibility studies, and other technical reports

Managing field teams that are overseeing the collection of field samples (soil, groundwater, soil vapor, air), remediation pilot testing, construction oversight, and operation and maintenance of remediation equipment

Be focused on ensuring designs are delivered in compliance with client specifications and to the agreed programme and budget.

Execution of engineering & design works within budget and schedule

Working as Client Representative within a multi-disciplinary team, for supervision of the construction works which are being carried out under lump sum contracts

Lead and manage technical design processes on multi-disciplinary projects

Plan, monitor and supervise work of other engineers

Prepare technical reports, tender documents, bill of quantities, evaluate technical bids & reviews vendor/third party documents

Participate in Client and Contractor facing technical and progress meetings

Coordinate with the Client and Contractor and particular focus on liaising with relevant Authorities and overseeing wayleave applications

Co-ordination with other disciplines to resolve engineering issues during design development, review and check processes - to ensure design packages meet the relevant health, safety and environmental standards

Discussions with support engineers and designers regularly on scope, man-hours and schedule

Participate in the technical reviews and progress review of projects.

Undertaking civil engineering design, review and project management for a wide range of projects including land development, high density retail and other civil infrastructure

Commercial project delivery of a range of projects ensuring timeframes and budgets are met

Provision of specialist design and reporting expertise within a multi-disciplinary office

Management of client relationships on allocated projects including developers and contractors

Tertiary qualifications in Civil Engineering coupled with at least five years' experience within a consulting environment

Significant experience within the NSW market, ideally within the residential and commercial land development sector

Well-developed interpersonal skills to develop, maintain and enhance client relationships

Undertaking civil engineering design, review and project management for a wide range of projects including land development, road infrastructure, high density retail and other civil infrastructure

Manage a team of engineers / designers / drafters

Ability to communicate confidently and professionally with all levels of staff and clients

Technical management of junior staff

Undertake design reviews and checking

Be self-motivated and able to work both independently and as part of teams

The ability to work to time and cost budgets

A willingness to work with Clients and their project teams

Identify and input to activities in support of the wider business objectives that may draw upon skills in addition to those outlined above

Support Team Leader in work winning including representing the business at networking evets, preparing bids and tenders and establish, maintain and develop relationships with existing and prospective internal and external clients.

Job Description & Requirements

Roles & Responsibilities

Company with a chain of restaurants looking to hire individuals with enthusiasm for customer service. There will be opportunities to climb the ladder and be promoted to Supervisor and Manager position.

Customer Relations

· Interact with guests for entertainment and rapport while garnering feedback for the growth of company.

· Handle guests complaints and feedback with tact, to ensure all guests leave the restaurant with a smile.

Maintenance of Restaurant

· Maintain high levels of hygiene and cleanliness of restaurant to ensure pleasant during experience for every guest.

· Daily housekeeping to ensure highest quality of cleanliness.

Front of House

· As front of house crew, to maintain a friendly and positive vibe for both guests and colleagues by smiling and greeting.

· If on POS duty, candidate will be the last point of contact before guests leave, thus must ensure to solve any complaints.

Requirements

Language

· Fluent in spoken and written English

· Will be a bonus if candidate able to speak Mandarin/Korean

Experience

· Fresh graduates may apply with relevant education

· Preferably at least 1 year experience in customer service or F&B industry

1. Support and handle all electrical repair work on waste handling equipment (on-site and in-house workshop).
2. Support all electrical (and mechanical) diagnostic jobs assigned (in-house workshop and/or on-site).
3. Standby duty for 24-hours mobile service support.
4. Execute daily job schedule. (Teamup calendar)
5. SAC inspection service. (On-site / workshop)
6. Pre-delivery inspection (PDI) of waste handling equipment.
7. Testing and commissioning work for waste handling equipment.
8. Periodic preventive maintenance schedule. (On-site / workshop)
9. Corrective maintenance schedule. (On-site / workshop)
10. Prepare service report upon completion of assigned tasks.
11. Report all electrical parts requiement or shortage spare parts to executive for follow-up.
12. Support new project installation and troubleshooting work.
13. Ensure proper housekeeping and maintenance of assigned equipment and tools in mobile service truck.
14. Any other duties as assigned to you from time to time.

Responsibilities:

• Planning, responding and attending to maintenance requests and complaints on power generators
• Assist in tender submission, material planning & requisition
• Generate service reports, troubleshooting reports and make proposal to client
• Generate method statement, risk assessment plan
• Carry out monthly generator set maintenance servicing check
• Carry out fault diagnosis and forwarding planning on assigned works/ projects
• Carry out on-call responsibilities on a rota basis
• Conduct inspection with client for site activities on power generator issues
• Observe & demonstrate behavior in line with the core value of the Company
• Liaise with contractors and attend site meetings
• Execute site work and ensure work performance is accordance to work standards & specifications
• Assume any other suitable duties as and when assigned by the Company

Requirements:

• ITE/ Nitec/ Diploma in Electrical/Mechanical Engineering or related fields
• Minimum 5 year of diesel engine generator related experience
• Proficient with MS Office Applications
• Good team player with ability to work independently

Interested candidates are to write in with a detailed resume containing details of your qualifications, experience, current and expected salaries and availability.

We regret that only shortlisted candidates will be notified.

Job Description:

1. Design, develop, implement and integration of IP Network (IPRAN, IPCORE, DataCenter Network, Campus network & other enterprise network) and related products (Router, Switch, Firewalls), including network planning and design, installation and commissioning, services integration and migration.

2. Embed security principles into the design of system/network architectures to mitigate the risks posed by new technologies and corporate/ business practices.

3. Providing high-level and low-level network design conducting DC products pre-sales testing Proof-of-Concept (PoC) and Network Test Introduction (NTI) a according to regression and test cases.

4. Providing onsite survey, planning, installation, commissioning, acceptance testing and network upgrade on DC products and solutions.

5. Managing customers’ problems and meet the SLA commitment in contracts, perform routine activities related to the periodic review and audit activities of infrastructure security systems and maintains documentation of security standards and procedures.

6. Supporting pre-sales teams in activities like feature request, tenders and customer technical clarifications.

7. Providing technical support to customers through remote and on-site trouble-shooting.

8. Support equipment health check service for software and hardware inspection if required by maintenance or professional service team.

9. Assist Network Roll-out team in DC product planning and deployment includes hardware installation inspection, software upgrade and implementation.

10. Support all the project delivery of IP Network product in Asia Pacific Region.

Job Requirements:

1. Minimum bachelor degree in computer Science/engineering/telecommunication or other related majors.

2. At least 10 years Network Architect projects delivery experience and at least 6 years and above of Enterprise/Telco project exposure in Multiple countries.

3. Accepts global business trips and long-term business trips.

4. Familiar with IP Protocol (OSPF, ISIS, BGP, MPLS, VxLAN, E-VPN).

5. Familiar with planning and deploying IP services, such as MPLS-VPN, MPLS-TE, multicast, SR-Policy, SD-WAN and IPv6.

6. Participate in at least 2 to 4 IP network delivery projects (IPRAN, IPCORE, DataCenter Network and Campus Network), and have certain capabilities in routine equipment maintenance, fault demarcation, and network optimization.

7. Be able to take the leadership in implementing and deploying network solutions, identify major network risks and risks, and take effective measures to solve or avoid them.

8. Mandarin is essential to communicate with colleagues in the head office in China.

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

The Sales Solutions Engineer collaborates directly with the sales or account team by acting as a technical expert in all of the events that lead to a buying decision. With direct responsibilities that include pre-sales technical consulting, pricing recommendations, data security or compliance requirements, technical demonstration setup, and client presentations, this individual will act as an invaluable partner to the entire sales organization and a crucial part of the sales cycle.

The SE exhibits a deep technical understanding of the product(s) that they are responsible for within the sales cycle. This individual must be comfortable presenting to lower level influencers and high-level decision makers alike, and most importantly, adjusting the level of technical depth to suit the audience. The Senior Sales Solutions Engineer is responsible for collaborating with sales team, delivery teams, and account management teams. This role can be broken into four key areas:

Product Pre-Sales Consulting:

· Assist the sales team to provide expert technical direction or consulting to the client as a pre-sales exercise, including assistance in qualifying opportunities.

· Develop a standardized consulting approach to assist the sales team with budgetary estimates and pricing exercises.

· Possess a broad understanding of JLLT product offerings to be able to recognize opportunities adjacent to and in addition to the current product offering.

Product Demonstrations:

· Work with product infrastructure and ensure that all out-of-the-box demonstration environments are available, performing adequately, and configured in preparation to the client’s needs.

· Improve the speed of response by establishing and maintaining an out-of-the-box demo dataset as well as demo scripts.

· Innovate by establishing advanced demonstration sets that can be more tailored and unique to client challenges and business requirements.

· Collaborate with the sales team to recommend configurations, identify required customizations, and/or uncover unique opportunities in support of each sales pursuit.

Product Innovation and Continued Expertise:

· Develop his/her own learning path to ensure that all functional areas of selected products are understood at expert-level. There should be a cyclical nature to this path: Learn, Repeat, Teach, and Innovate.

· Contribute to continuous innovation efforts led by the JLL technical delivery team by understanding the broader JLL technology ecosystem, market trends, competition, and industry demands.

· Act as a liaison between the Sales Enablement Team and the product delivery leader for continual product improvement, ideas sharing, and general collaboration.

· Expand your product knowledge to include JLL Technologies products and 3rd party solutions to provide a more well-rounded consulting experience for prospective customers.

Product Bid Response Efforts:

· Participate in RFP response efforts as needed. This could include collaborating on technical responses, example deliverables, system graphics training guides, and pricing exercises. This could also be connecting to the correct resource internally to help, as well.

· Make recommendations to the bid management team on improvements to proposal language and technical deliverables.

· Attend sales pursuit debriefs to provide feedback on the sales cycle, team approach, win themes, and client engagement.

Key Responsibilities:

· Product demonstrations

· Product presentations

· Collaboration with sales pursuit teams

· Collaboration with product delivery teams

· Collaboration with bid management teams

· Establishing standardized product demo environments, demo data sets, and demo scripts to increase our speed of response

· Develop a personalized learning program and cadence to continually deepen subject matter expertise while also educating partners internally

· Develop standardized pre-sales consulting approach for product pricing and functional area mapping to create a consistency, efficiency, and accurately in our client recommendations

· Assist in pricing and proposal development

· Continuous improvement in products and process.

• Conducting maintenance service, commissioning of alarm systems
• Address to customer request on alarm and card access systems

Requirements:

• Basic Security certified
• At least 2 years of working experience
• Possess valid class 3 driving license

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

We are actively looking for Data Engineer for a permanent position in Singapore. This exciting opportunity is with a well-established global IT service provider known for its excellence in the industry.

Key responsibilities:

• · Designing, building and maintaining data architectures, including databases and processing systems;

• · Acquiring and integrating new data sources;

• · Optimising data pipelines, automating processes where possible and planning for scalability;

• · Developing methods for identifying issues in data quality, reliability and efficiency;

• · Applying appropriate security controls to all relevant collections, databases and systems;

• · Maintaining documentation relating to the design and maintenance of data systems; and

• · Creating and maintaining the infrastructure and analytic tools to allow for efficient data extraction and transformation.

Key skills and qualifications:

• · Degree qualified in data science, computer science, statistics, information systems, or related disciplines;

• · Extensive experience with SQL, Python and R;

• · Experience or familiarity with Airflow, Spark, Hadoop, and PostgreSQL;

• · Experience with data modelling and ETL tools;

• · An understanding or interest in data science or analytics would be advantageous

About Us

We specialize in Digital, ERP, and larger IT Services. We offer flexible, efficient and collaborative solutions to any organization that requires IT, experts. Our agile, agnostic, and flexible solutions will help you source the IT Expertise you need. If you are looking for new opportunities, send your profile at [email protected].

Also follow our LinkedIn page for new job opportunities and more.

Zone IT Solutions is an equal opportunity employer and our recruitment process focuses on essential skills and abilities. We encourage applications from a diverse array of backgrounds, including individuals of various ethnicities, cultures, and linguistic backgrounds, as well as those with disabilities.

We are looking for a DevOps Engineer for Singapore for a large-scale project. This is a contract role with a global IT service leader.

• Proficient in utilizing Azure services such as Virtual Machines, Service Principal, Roles/Groups, Log Analytics/Alerts, Azure CLI, and hosting/integrating Web apps on Azure.
• An in-depth understanding of Microservices and how CI/CD can leverage the Microservices architecture.
• Hands-on experience with DevOps tools such as Ansible, Git/Bitbucket, and Bamboo/Jenkins.
• Familiarity with IaaS, PaaS, and SaaS in cloud computing.
• Prior experience in developing automated jobs and processes using PowerShell, Python.

About Us

Zone IT Solutions is Australia based Recruitment Company. We specialize in Digital, ERP and larger IT Services. We offer flexible, efficient and collaborative solutions to any organization that requires IT, experts. Our agile, agnostic and flexible solutions will help you source the IT Expertise you need. Our delivery Offices are in Melbourne, Sydney and India. If you are looking for new opportunities your profile at [email protected] or contact us at 0434189909

Also follow our LinkedIn page for new job opportunities and more.

Zone IT Solutions is an equal opportunity employer and our recruitment process focuses on essential skills and abilities. We welcome applicants from a diverse range of backgrounds, including Aboriginal and Torres Strait Islander peoples, people from culturally and linguistically diverse (CALD) backgrounds and people with disabilities.

Job duties

• Develop and implement techniques and analytics applications to transform raw data into meaningful information using data-oriented programming languages and visualisation software.
• Apply data mining, data modelling, natural language processing, and machine learning to extract and analyse information from large structured and unstructured datasets.
• Visualise, interpret and report data findings and may create dynamic data reports as well.
• Build and optimizing ‘big data’ data pipelines, architectures, and data sets.
• Performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.
• To support and develop Data modelling, Data mapping activities.
• Strong analytic skills related to working with unstructured datasets.

Requirements

· Experience with Data engineering tools (Python, Spark (Scala or Python), Hadoop) or relational databases (oracle, MySQL, MS Sql) or NoSQL databases, including Postgres and Cassandra.

· Experience with data pipeline and workflow management tools.

· Experience with object-oriented/object function scripting languages: Python, Java, C++, Scala, R, etc

· Bachelor’s degree in IT or Computer Science or Equivalent experience.

JOB DESCRIPTION

Expect more. Connect more. Be more at Diebold Nixdorf. Our teams automate, digitize, and transform the way more than 75 million people around the globe bank and shop in this hyper-connected, consumer-centric world. Join us in connecting people to commerce in this vital, rewarding role.

Position Overview

We are looking for a Software Engineer that will be an active member of an international virtual team, providing technical support for system integration project of ATM client software into customer environment with comprehensive Diebold Nixdorf product knowledge and customer requirement.

RESPONSIBILITIES

• Work on software development, implementation and / or configuration in Professional Services projects.
• Work with commercial and corporate developed products.
• Interface directly with customers or field personnel in developing customer specifications, requirements, and support.
• Improve software engineering methods and processes within his / her local area.
• Individual must be able to work in a team environment and deal well with customer support issues.
• Customize, integrate and/or develop complex SW components and systems.
• Utilize standard DN solution elements and development procedures and develop re-usable solution elements if required.
• Take responsibility of testing and QA within the development team
• Produce, update, review and modify implementation and operating documentation of SW solutions and changes according to DN SW documentation guidelines and in line with customer needs.

QUALIFICATIONS

Required Qualifications

• Bachelor’s Degree in Computer Science, Computer Engineering, Information Services, Mathematics, or equivalent experience.
• 3 to 5 years’ experience in software application development.
• A pragmatic, but innovative problem solver
• Experienced in enterprise architecture, Java (EJB), SOA, Microservices, containerization, API and modern integration methods ( e.g. Kafka)
• Experienced with SQL ( e.g. Oracle, MS SQL, Postgres)
• Willingness to travel at short notice and spend longer periods abroad.
• Knowledge of the methodology & tools of agile software development - preferably SCRUM, Jira, Confluence, Bitbucket, Nexus, SonarQube, etc.
• Advantage to possess experience of card( debit and credit) and/or cardless payment projects and, of various flavors of ISO8583 implementations as well as keeping up-to-date with Payment standard.
• Fluent English communication skills and comfortable interfacing with external clients.
• Readiness to work remotely as part of virtual teams or onsite support at customer environments, depending on project demands.
• Experience in international projects delivery with involvement of both internal and external departments / parties.
• Understanding of CEN-XFS, NDC/DDC standards will be an advantage but not a must.
• Experience ATM industry / Self-Service Banking will be an advantage but not a must.

Preferred

• Good knowledge of the scope of services of the Diebold Nixdorf software portfolio for banks – especially in the domain of payments applications. Relevant Banking experience will be an advantage.
• Knowledge of cloud technologies, such as virtualization, containers, high availability, data security, as well as the design and operation of cloud environments
• Working knowledge of DevOps, CI/CD and automation technologies.
• Certification in Cloud ( e.g. AWS Certified Cloud Practitioner) would be advantageous.
• Experience with Shared ( ATM or POS) networks as well as the global card schemes.
• Exposure to other payment standards for messaging ( e.g. ISO20022)
• Experienced with card management system (card issuing ) and fraud detection.

About Us

Why should you join Diebold Nixdorf?

Brightest minds + technology and innovation + business transformation The people of Diebold Nixdorf are 23,000+ teammates of diverse talents and expertise in more than 130 countries, harnessing future technologies to deliver personalized, secure consumer experiences that connect people to commerce. Our culture is fueled by our values of collaboration, decisiveness, urgency, willingness to change, and accountability.

–Diebold Nixdorf is an equal opportunity employer and we value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, or disability status.

• To all recruitment agencies: Diebold Nixdorf does not accept agency resumes. Please do not forward resumes to our jobs alias, Diebold Nixdorf employees or any other organization location. Diebold Nixdorf is not responsible for any fees related to unsolicited resumes**

We are a global Company operating in multiple Locations and Entities. As we are keen to find the best solution for our candidates several legal entities might be applicable for a Job offer. A List of our operating entities can be found here - https://www.dieboldnixdorf.com/en-us/about-us/global-locations

Job Info:

One of the company which specializing in smart warehousing.

Salary: Basic $4,000 - $6,000 + VB

Time: Monday - Friday (8.30am - 5.30pm)

Location: Benoi Road

Responsibilities:

• Develop and maintain Warehouse Control System (WCS) application.
• Development of REST API endpoints for interfacing with external and internal stakeholders.
• Implementing REST API logic.
• Database integrations for persisting REST API data.
• Testing of REST APIs.
• Development of internal APIs for interfacing with internal components.
• Writing documentation for internal API interfaces.
• Supporting deployment of WCS system on customer’s premises.
• Handling integrations with additional systems.
• Deployment and testing of the system - DevOps related tasks.

Requirements:

• Minimum Bachelor's degree in computer science, computer engineering, information technology or equivalent practical experience.
• At least 2 years relevant experience.
• Software skills: Python, Docker, Git, REST API.
• Highly motivated and creative, thinking "out of the box", team player, problem solver, good interpersonal and communication skills.

Please submit your updated resume by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform you that only shortlisted candidates would be notified.

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Toh Qiu Wei | EA Personnel No.: R23116260

Job Description

• Assist in supervising and coordinating M&E services work
• Attend project meetings; liaise and coordinate with clients, consultants, relevant authorities and sub-contractors on M&E issues.
• Manage M&E subcontractors’ submission of method statements, drawings, materials, samples, and work progress.
• Compliance with all necessary standards, code of practice and safety regulations;
• Handle any other ad-hoc duties and tasks assigned

Job Requirement

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• At least 4 year(s) of working experience in the related field is required for this position.
• Prefer with construction industry background.
• Work independently and liaise effectively with with sub-contractors and suppliers
• Good communication and Interpersonal skills