Working location: Jurong island

Job Description

· Analyze project data, determine potential risks and challenges and develop appropriate mitigation plans.

· Provide project control support to Manager to successfully plan and execute assigned projects.

· Analyze project problems and recommend resolutions.

· Determine key performance indicators to improve project operational efficiency.

· Determine project forecasts and accruals and monitor cash flow projections.

· Work with Manager in developing project plan, schedule and budget.

· Oversee change order management and implement change requests in a timely manner.

· Monitor project progress to identify and correct delays or deviations.

· Monitor project status on regular basis and develop status reports to management.

· Advice Managers on project controls practices and procedures.

· Work independently or in a team to perform daily work assigned by Site/Construction Manager.

· Maintain positive working relationships with management, project team and customers.

· Develop and manage construction schedule for project

· Collaborate with other disciplines to collate/provide scheduling data — subcontract change requests, bid comparisons, new work item estimates and resolution of potential schedule/work problems

· Interface and work closely with clients, project team and sub-contractors to ensure required progress

· Prepare cost estimations and detailed man-hour calculations

· Monitor and record work delay/progress and prepare scheduling reports

· Analyze gaps between the planned and actual progress and highlight the areas of concern to project management

Requirements

· Qualification: Diploma or Degree in Engineering.

· Experienced Primavera P6 user with minimum 1years of project planning experience using P6Experience

· Ability to work independently and communicate clearly and able to work at site environment

Responsibilities:

• Track all inquiries for quotations upon customer contact and equipment arrival at the inbound equipment
• Open Tracker Ticket for all workshop RFQ
• Fill up Customer Requirement Request Form and upload to RigTsc
• Contact customers to define the necessary scope of work
• Carry out credit limit checks, and ensure customers are not on black or watch log lists by using the Global Compliance System
• Work on difficult issues regarding client complaints and other issues
• Creation and control of quotes according to customer needs by successfully forwarding the Contract Review/Purchase order to Admin Team for review and acknowledgement
• Ensure that all required outside vendors quotes can be received in a timely manner, which will allow us to ensure expected profit margins are in line with customer expectations. This will also ensure deadlines and the conclusion of service is achieved within the timeframe outlined
• Responsible for revising and adjusting quotes
• Create Delivery order and notify customer for equipment collection
• Identify potential improvement opportunities within the applicable systems and work with relevant departments on such improvements
• Pursue continuous improvement in its own activities and operations
• Comply with all NOV Company policies and procedures established by the Quality Management System, HSE, as well as all other Corporate guidelines

Requirements:

• Min O Level or Diploma equivalent
• Min 3-5 years’ experience in manufacturing environment is preferable
• Strong communication skills
• Good experience in Microsoft Excel
• Technical background in read assembly drawing / bill of material is strongly desired
• Meticulous

Duties and Responsibilities:

1. Provide leadership and management to continuously improvement on maintenance operations and support

production process equipment.

2. Work collaboratively within Production unit (Production, Engineering, and Electrical & Instrumentation) and other functions.

3. Ensure safety is integrated in every aspect of work performed by APS standard

4. To meet the production operations is supported with maintenance services to meet the Asahi Kasei Business needs.

5. Optimize equipment uptime, equipment reliability, and equipment efficiency by analyzing equipment performance data and maintenance practices and recommend improvements to procedures, systems and approaches.

6. Enhance or create effective maintenance programs to promote maximum equipment availability, capacity, productivity, and elimination of production discrepancies.

7. Provide troubleshooting and diagnosis of machinery / equipment failure to determine the root cause and perform immediate corrective action.

8. To manage analysis of maintenance data to identify trends equipment and organizational performance that adversely affect efficiency, cost quality, plant capacity, and production throughput. Implement recommendations on actions that can be taken to reverse adverse trends.

9. Manage the creation and review of maintenance procedures and policies

10. Manage development and implementation of enhancements designed to increase efficiency, effectiveness and quality while reducing costs

11. Ensure that documentation needs are provided within the context of maintenance programs.

12. Maintain an excellent employee workplace through the coaching, development and training of employees.

13. Provide reports to management as required.

14. Manage and control Maintenance Operation cost, and prepare and monitor Annual Maintenance Budget

15. Manage contractors / vendors progress in accordance to work schedule

16. Planning of site work schedule

17. Resolution of site issues encountered

18. Establish new capabilities and infrastructure to support company business growth plan

19. Analyse failure trends and implement corrective actions

20. Any other tasks as and when assigned by the management.

21. Able to liase closely with Japanese counterparts and Japan Headquarter.

22. Working closely with internal colleagues and external colleagues (Japan) for trouble-shooting and analytical.

Requirements:

· Degree in Engineering / Mechanical Engineering

· Able to use PC and MS Office programs

· Minimum 10-12 years relevant experience in Oil/Chemical/Plastics industries is an advantage

· Knowledge of mechanical plants and materials

• To support and maintain the ASRS (Automation Storage and Retrieve System) and its equipment for the logistics operations.
• To carry out continuous improvement to eliminate the ASRS and its equipment breakdown.
• To carry out planned maintenance of the ASRS and its equipment as per scheduled.
• To carry out routine checks to ensure the smooth operation of ASRS system.
• Carry out repair and troubleshooting of equipment breakdown.
• To maintain correct spare parts safety stock and replenishment.
• Any other duties as assigned by the Superior from time to time.

Requirements

• Diploma in Mechanical and Electrical Engineering or relevant certification from recognized institutions.
• Proficiency in MS Office (Excel and Words)
• Familiar with AC installation up to 400/480 volt and DC up to 24 volt.
• Familiar with wiring diagrams, symbols, and electrical measuring.
• Familiar with electrical/mechanical drive technology (e.g. motors and gears).
• Familiar control technology (e.g. controls/inverter).
• Forklift license will be an added advantage.
• Good working attitude, teamwork oriented and ability to learn new tasks.
• Must be able to work at heights exceeding 40 meter.
• Must be able to work on rotating shifts.

Position Summary

Preparation of tender and/or invoice for ship-repair and/or conversion projects on the basis of manhours, materials and subcontractor costing both prior to / after award of contract. Discuss with customers/subcontractors/trades regarding scope of work and settle the invoice.

Tasks and Responsibilities

• Understand and evaluate Technical Specification. Preparation and timely submission of comprehensive quotation according to technical specification requirement.
• Preparation and timely submission of Repair Invoice to Owners according to the work carried out. Discuss, negotiate and close out invoices with owners. Following up of ongoing work and updating of Cost and Budget.
• Sourcing of sub-contractors/vendors for ship-repair works and Issue Purchase Order, including negotiation of Subcontractors/vendors Invoices’.
• Maintain proper order of Estimating and invoicing filing.
• Keeping in close contact with Owners and Production alike for updates on repairs on board.
• Close follow up on estimated manhours and actual manhours. Discuss with relevant trade supervisors and revise and/or control the manhours.
• Negotiate with vendors for equipment purchases related to Repairs and Conversions, prepare Sales Agreements / Invoices.
• Prepare and submit profit and loss reports for management reporting.

Job Requirements

• Minimum (2) years working experience in the field of ship repairs.
• Minimum (2) years working experience in the Commercial Department of a medium sized Shipyard.

Tasks and Responsibilities

• Responsible for overall coordination of all activities of the repair/new build projects to achieve timely completion, in line with occupational health and safety, environment, quality, productivity and commercial aspects.
• Effective delegation and control of resources for optimum productivity.
• Ensuring compliance with contracts, specifications, regulatory, company, quality, environment, occupational health and safety standards and procedures.
• Plan, implement, and demonstrate continual improvement in occupational health and safety, quality, environment and productivity.
• Liaison and coordination with regulatory bodies, clients, consultants, contractors, and internally within the company to satisfy their needs within commercial controls.
• Ensure company and project milestones, and commercial controls are achieved by effective planning, logistics, and execution.
• Comprehensive inputs to Planning department, not limited to equipment, materials, processes, activities, manpower, and ownership of project plan.
• Control and monitor techno-commercial progress in relation to base line plan.
• Identify bottlenecks, highlight possible delays in advance, propose and execute corrective and preventive actions.
• Control and monitoring of variation orders, and coordination with Commercial department.

Requirements

• Safety Instruction Course for Ship – Repair Managers
• Marine or Mechanical Engineer, Naval Architect, or relevant Shipyard experience.
• Knowledge of shipyard production trade activities.
• Proficiency in Microsoft office.
• Good leadership and communication skills

Assembly, Maintenance & Overhaul Technician

Are you an Assembly, Maintenance & Overhaul Technician looking for a new opportunity?

Are you passionate in delivering all types of solutions to your customers?

Join our Drilling Services Team!

Our Drilling Services AMO Team is best at maintaining the latest products of drilling equipment in Baker Hughes. We collaborate with our service delivery teams in science, mechanical and electrical engineering, physics, geoscience, to develop innovative drilling tools.

Partner with the best

As the Assembly, Maintenance & Overhaul (AMO) Technician, you're to troubleshoot, test, assemble, disassemble, and perform visual inspection of electro-mechanical assemblies. You're also to review procedures for assembly, disassembly, and test verification accuracy. You're to assist in the preparation, development, and enhancement of maintenance procedural documentation within the Drilling Services team

As the AMO Technician, you will be responsible for:

· Troubleshooting, testing, assembling, disassembling (Parts & Equipment) and perform visual inspection of electro-mechanical assemblies.

· Configurating test stations and systems. Analyzing and interpreting data from environmental tests.

· Providing solutions to difficult technical problems. Perform inspection and disposition of parts & equipment.

· Assisting in setting up experiments and recording experimental data in collaboration with Engineering and Reliability groups

· Maintaining equipment records and filing systems as part of quality control and assurance programs.

· Evaluating maintenance processes for potential improvements in quality, reliability, turnaround times and costs. Compliance with HS&E policies and procedures

Fuel your passion

To be successful in this role you will:

· Have ITE or Technical diploma or Equivalent.

· Have ability to read, write & speak English language.

· Have maintenance related experience in electro-mechanical function or in relevant industrial experience (aerospace, military, oilfield, automotive, electronic).

· Have proficiency in reading and interpreting blueprints, wiring diagrams, assembly prints and parts lists.

· Have excellent soldering and assembling skills.

· Have analytical ability to find solutions towards complex technical issues.

· Have demonstrate systematic approach towards troubleshooting.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

· This role is a shift based working pattern. Please talk to us about the specific working patterns available when you apply.

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we must push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

· Contemporary work-life balance policies and wellbeing activities

· Comprehensive private medical care options

· Safety net of life insurance and disability programs

· Tailored financial programs.

· Additional elected or voluntary benefits

Work Time Profile:

• Monday to Friday, 8.00 AM to 5.00 PM
• Saturday, 8.00 AM to 12.00 PM
• 5.5-day work week

Company Benefits:

• Staff Lunch
• Training and Development Opportunities
• Bi-Annual Profit-Sharing
• Performance Bonus
• Staff Discounts on Seafood purchases
• Medical Benefits
• One-way Shuttle Service to Jurong Fishery Port
• Confirmation Seafood Hamper

Job Duties:

• Develop and implement a comprehensive preventive maintenance program for the office building, production plant, and cold room warehouse
• Supervise Facilities and Maintenance staff in executing routine inspections, repairs, and upgrades to ensure optimal functionality
• Coordinate with external vendors for specialized maintenance services as needed
• Address emergency maintenance issues promptly to minimize downtime and disruptions
• Oversee the maintenance and repair of processing equipment, machinery, and other production-related assets
• Develop and implement a predictive maintenance strategy to reduce equipment downtime and enhance operational efficiency
• Collaborate with production managers to schedule maintenance activities during planned downtime periods.
  Keep accurate records of equipment maintenance history and performance
• Ensure that all facilities and machinery adhere to safety standards and regulations
• Conduct regular safety inspections and audits to identify and address potential hazards
• Collaborate with the safety team to implement safety training programs for maintenance staff
• Develop and manage the facilities and machine maintenance budget, ensuring cost-effective solutions and resource optimization
• Obtain competitive quotes for maintenance services and negotiate contracts with vendors

You need to have/be:

• Bachelor’s degree in Mechanical Engineering, Facilities Management, or a related field (preferred)
• At least 3 years of experience in facilities and machine maintenance, preferably in a food processing or manufacturing environment with supervisory responsibility
• Strong knowledge of maintenance best practices, safety protocols, and regulatory compliance
• Excellent leadership and supervisory skills with the ability to motivate and guide a maintenance team
• Effective communication and interpersonal skills for collaboration with cross-functional teams

Maintenance Supervisor

At Terberg Zenith, our commitment to exceptional after-sales support remains unwavering. We prioritise environmentally conscious practices, boast a team of skilled technicians, streamlined spare parts management, and implement intelligent service operations to ensure a positive and seamless customer experience.

We are seeking a dynamic and experienced individual to join our team as a Maintenance Supervisor. This role is crucial in ensuring the smooth operation of our service department, meeting customer demands, and maintaining high service standards.

Position Overview:

As a Maintenance Supervisor for Heavy Vehicles and Machinery, you will play a key role in overseeing the daily service operations to guarantee customer satisfaction. You will be responsible for managing customer service level agreements (SLA) and the service team, while addressing technical issues related to maintenance with principal suppliers and customers. Additionally, you will implement and monitor quality assurance processes and safe working procedures.

Key Responsibilities:

1. Customer Satisfaction:

· Oversee daily service operations to ensure timely and quality delivery of services.

· Manage customer service level agreements (SLA) and ensure compliance with

established standards.

· Address and resolve all customer concerns and technical issues promptly.

· Prepare regular reports to customers and management.

2. Operation:

· Implement preventive maintenance and corrective maintenance programs and

schedules for the equipment under service contracts.

· Ensure efficient job allocations and resource management of workforce, fleet, and

spare parts.

· Provide quotation to customers for any maintenance works.

3. Quality Assurance:

· Implement and monitor quality assurance processes to maintain high service

standards.

· Conduct regular audits and assessments to identify areas for improvement and

implement corrective actions.

4. Safety Compliance:

· Implement and monitor safe working procedures to ensure a secure working

environment.

· Provide training and resources to the team to promote safety awareness and

adherence.

5. Financial Management:

· Manage the cost and profit of quotations and service contracts, ensuring financial

objectives are met.

· Monitor and analyse financial reports related to service operations.

6. Spare Parts Inventory:

· Oversee the spare parts inventory and ensure adequate stock levels.

· Place orders for spare parts as necessary to support efficient execution of service

contracts.

Qualifications:

· Minimum diploma in Mechanical Engineering or a related field.

· Proven experience in managing service operations for heavy vehicles and machinery.

· Strong leadership and team management skills.

· Excellent communication and customer service skills.

· In-depth knowledge of quality assurance processes and safe working procedures.

· Financial acumen with the ability to manage service contract costs and profits.

· Familiarity with spare parts inventory management.

Description

To plan and schedule for maintenance activities, shutdown works, as well as capital expenditure (Capex) projects.

To work with other professionals in the projects and other discipline to improve production facilities, reduce the incidence of costly breakdowns, and develop strategies, procedures and method to improve overall reliability and safety of personnel and processes.

Responsibilities

• To promote the improvement of overall reliability, preventive and corrective maintenance, in addition to responding to breakdowns.

• To plan and schedule planned and unplanned work.

• To assist in scope development of all major and turnaround maintenance events.

• To monitoring and controlling maintenance timeline and costs.

• To write maintenance strategies to help with installation guidelines.

• To plan monthly work schedule and set productivity to be achieved.

• To be responsible for the delivery of maintenance activities in compliance with system specifications.

• To be involved in maintenance/project management.

• To be involved in all site meetings.

• To support pre-startup maintenance activities to add value to subsequent maintenance services that follow.

• To verify technical specifications for adequacy.

• To respond to operational and maintenance issues and provide solutions that are both safe and cost effective.

• To ensure proper planning of materials availability at site for maintenance/ corrective works.

• To liaise with Client’s Representative on all maintenance/ project issues and sub-contractors coordination works.

• To arrange specialist procurement of fixtures, fittings or components; controlling maintenance tools, stores and equipment.

• To initiate and undertake action to prevent the occurrence of non-conformity.

• To identify and record any product quality problems and to verify the implementation of solutions.

• To enforce Client, Company and regulatory guidelines for corrective action and work management processes.

• To assess and implement new maintenance technologies that promotes and improve work efficiency and productivity.

• To prepare commercial and technical proposals.

Requirements

• Diploma or Degree in Engineering (Mechanical/Maintenance) or equivalent preferred

• Preferably with minimum 2 to 5 years of relevant working experience as Maintenance Engineer handling maintenance projects in Oil and Gas industry and petrochemical industries

• Those with experience using Computerized Maintenance Management System will have an added-advantage.

Carry out maintenance activities such as:

• Servicing of equipment such as centrifugal pump, diaphragm pump, replacement of mechanical seal, pump alignment, rigging & lifting.
• Perform repairs and other maintenance activities to specified specs and standards per procedure.
• Able to perform predictive maintenance and data collection for field equipment
• Able to perform QC equipment maintenance and troubleshooting such as freezer and incubator.
• Attend to equipment breakdown and preventive maintenance on short notice during weekends/public holidays.
• Support equipment inspection with vendor representative on tanks, column, pipelines and centrifuge as per RSTO Visual Inspections standards.
• Repair and replace damaged parts to bring equipment back into service timely to support continuous production planning.
• Perform minor piping modification and rebuild of MRO spare part.
• Perform polishing and passivation of vessel internal surfaces according to RSTO procedure.
• Maintain all machine shop tools and equipment such as, and not limited to, welding set, working tooling, lifting gear.
• To actively participate and perform workplace 5S housekeeping.
• Able to contribute and implement Safety Improvement Ideas for CI projects works together with System/Equipment Engineers.
• Perform tasks as defined in the Maintenance Work Orders for assigned equipment or system.

Safety, Health & Environment:

• Comply with all RSTO’s Safety, Health & Environmental (SHE) requirements, never put oneself and others at safety & health risks, and report any workplace accidents, near misses and hazards as soon as practicable.
• Observe all RSTO’s site security measures at all times, and report any suspicious characters/objects & damaged security mechanisms to Site Security immediately.

Lean Production System:

Embody PT Lean Production System (LPS), while demonstrating a continuous improvement mindset and behaviors through the use and application of LPS tools for continuous improvement initiatives.

Job Qualifications:

The following trainings shall follow the latest applicable WSH regulations

• Scissor Lift/Vertical Personnel Platform - Operator
• Confined Space Operation - Worker
• Work at Height – Worker

Job Requirements:

• Willing to perform shift hours as required.
• Minimum of 3 years working experience, including GMP and Pharmaceutical environment
• Proficiency in spoken and written English.
• Computer literate on Microsoft Office, Email operating system, CMMS software.
• Working experience in handling of hazardous chemical.
• Working experience in basic welding and fabrication work.
• Preferred working experience in handling of Electro-polishing Equipment.
• Preferred experience in operating digital video scope.
• Preferred experience in handling homogenizer and centrifuge equipment.
• Preferred work experience in GMP and Pharmaceutical environment.
• Able to interpret P&ID, LOTO mark-up drawings and perform physical Energy isolation processes.
• Able to perform confine space vessel related work.
• Able to support night shift and outside office hours as assigned by RSTO or Task Supervisor.
• Willing to accept 1-Year contract basis.

Job Purpose

· Assist in the Operation, Management and Maintenance of Dormitory at 12 Pioneer Sector 1.

· Main Activities

o Manage, Monitor and Maintain all particulars of tenants and employers.

o Ensure occupants abide by all Dormitory Rules and Regulations.

o Manage and Supervise Dormitory Maintenance Workers on House Keeping Duties.

o Coordinate with various authorities on all FEDA compliance matters.

o Attend to inspections and report submission to all relevant authorities.

Duties and Responsibilities

· Oversee day-to-day Operation of Dormitory at Tuas HQ and 12 Pioneer Sector 1

· Ensure proper records of Tenant Particulars.

· Investigate root-cause of operation incidents and services failures and make recommendations to management.

· Continuously improve the SOPs to encourage higher productivity

· Manage clients and address their concerns on Well Being of their workers.

· To provide prompt and acceptable level of services to both external and internal customers while managing costs.

· Attending to government agencies.

Qualifications and Requirements

· Diploma in Management or equivalent.

· Min 10 years experience in Management of Foreign Worker Dormitories.

· Good interpersonal skills and team player spirit with BS Group of Companies, Service Providers and Clients.

· IT literate and proficiency in Microsoft Office applications (Word, Excel and Outlook).

· Ability to speak in Mandarin and English.

· Establish harmonious and effective working relationships both within and outside the organization.

· Ability to plan and supervise the work of subordinates to meet Management Goals.

· Demonstrated ability to work in a multi-cultural environment.

Working Conditions

Monday to Friday 8am to 5pm

Saturday 8am to 12pm

REPORTING TO:

Maintenance Manager

General Scope :

• Support in implementation and participate in the continuous improvement effort in the areas of Safety, Quality, Environment and Health Management System (for example SS506 part 3, ISO 9001, ISO14001, OHSAS 18001, IATF 16949).
• To have a legal obligation to act in a responsible manner for the safety of themselves and other persons who may be affected by their actions or omissions at work.
• Assist the Management in ensuring that Major Accident Hazards are reduced to As Low as Reasonably Practicable (ALARP) and escalate when necessary.
• Ensure compliance to Customer Specific Requirements (CSR).

Main Duties & Responsibilities :

• Manage day-to-day maintenance services of electrical and field instruments in the process plant.
• Lead in the investigation/trouble-shoot of instrument fault or failure and provide effective and viable corrective and preventive action.
• Analyse and improve equipment reliability of plant to prevent recurrence with production group and contractors.
• Good knowledge and hand-on experience with DCS and PLC system.
• Prepare long-term maintenance plan for plant instrument, CV, Motor & Electrical Equip etc.
• Manage annual shutdown maintenance (Work planning, Management of actual site work, Liaising with contractors and production group).
• Manage in-house contractors to execute maintenance timely and effectively.
• Manage inventory control, quality of in-house contractor and vendor work.
• Responsible to ensure ISO/Mandatory calibration document, instrument files and work order documentation is timely complete with accurate in accordance with SOP
• Develop, revise and review of SOPs for maintenance/inspection of plant electrical and instrumentation equipment (eg. TI, TT, PI, PT, CV, on/off valve, motor, Switchgear, MCC etc.).
• Prepare documentation pertaining to procedures, qualities and safety of maintenance work.
• Ensure all maintenance activities comply with EHS policies.

REQUIREMENTS

• Degree in Electrical, Electronics, Instrumentation engineering or the equivalent.
• Min 5 years of experience as an E&I Engineer in chemical plant.
• Basic understanding of maintenance technology, equipment, instruments, electrical and manufacturing process.
• Demonstrate ability to manage contractors/vendor independently and effectively.
• Good interpersonal and communication skills.

Roles and Responsibilities

1. Provide general administrative support to related internal departments
2. Maintain proper filing of records, correspondences and documents
3. Data entry and payroll functions
4. Perform ad-hoc and other administrative duties as assigned by supervisor

Job Requirements

1. Minimum 1 year working experience, and proficient in Microsoft Office
2. Willingness to learn and good time management
3. Organised and detailed who can work independently
4. 5 day work week
5. Location: IMM Building

To maintain the operational capability of the incineration plant such as performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery. Performing daily inspection on equipment to look out for anomalies and having good documentation on various records and reports for the maintenance operation. Candidate shall be equipped with the ability to understand system schematics and drawings.

Maintenance

· Ensure the plant day-to-day operation is functional at its optimum level.

· Assist the Engineer and lead a team of skilled worker in the maintenance and expeditious repair of the plant’s mechanical equipment.

· Performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery.

· Perform daily inspection on equipment.

· Analyze breakdowns, diagnose faults and execute the required rectification process.

· Take part in plant overhaul activities.

· Ensure close coordination with various parties for maintenance activities.

· To ensure that equipment maintenance & service procedures and programs are effectively implemented consistent with sound engineering practices.

· Ability to understand system schematics and drawings.

· Assist the engineer in any other duties as required.

Requirements

· Minimum Diploma in Mechanical or Electrical

· Minimum 5 years’ experience in Waste to Energy Plant

· Boiler Attendant / Steam Engineer Certification will be a plus.

· Proficient with Microsoft Word, Excel and PowerPoint.

· Able to work 5.5 days a week and if required, including public holidays and weekends.

· Shift work is not required.

· Team player that is proactive and able to work under pressure.

· Maintaining a positive outlook in the event of adverse condition.

· Process Plant WSH Supervisor Certificate and above.

· Confined Space Supervisor and above.

· Work At Height Supervisor and above.

Responsibilities:

Duty No 1 (Marketing & Business Development)

• Prepare business proposals and present to clients
• Identify new market opportunities in Ship Repair (SR) & Ship Conversion (SC)
• Assist in preparing business proposals liaising with CSR , EDC and Ops to submit and bid for new SC projects
• Attend internal meetings and discussions, preparing minutes or reports as and when necessary
• Attend customer meetings and attend to feedback on contractual matters, preparing reports and performing coordination works as and when necessary
• Propose new ways and drive to outreach new clients or future projects with current clients
• Achieve results in terms of sales
• Drive the before and after sales hospitality

Duty No.2 (Commercial)

• Carry out estimation and billing work for assigned projects

• Management of project costing of SR & SC projects

Requirements:

• Degree in Engineering or other disciplines
• Able to understand basic engineering terms
• Be able to do planning for projects (Optional)
• Able to communicate effectively with internal staff and customers
• Experience in marketing work (more than 5 years)

• Planning of overhaul, inspection and trouble-shooting of power plant equipment
• Responsible for all type maintenance work related to steam turbine
• Carry out corrective and preventive maintenance in accordance to the work instruction and procedures
• Contract service supervision
• Possess knowledge and skills on turbine and maintenance at power plant
• Knowledge in specialized area & ability to resolve technical issues
• Complete monthly professional technical analysis (including equipment and technical parameters)
• Understand the status of the equipment (equipment defects and failures that have occurred, and elimination of defects)
• Collect and summarize the work tickets and operation tickets
• Propose solutions to existing problems, report to superior, and seek approval from the management before implementing solutions
• Any other duties and responsibilities as and when assigned by the company

Job Requirements

• Diploma or Degree in Degree in Electrical, Mechanical, Instrumentation engineering or the equivalent.
• Minimum 5 years’ experience on mechanical maintenance of waste management preferred.
• Good communication skills
• A good team player
• problem solving skills
• Experience in Power Plant is an advantage

Job Description

• Provide technical support & maintenance in packaging handling system such as FFS, FIBC, Fanuc robot and conveyors systems lines.

• Troubleshoot controls and electrical equipment; execute the necessary adjustments to bring equipment up to running status.

• Engage in the Loss Prevention System (LPS) to proactively prevent or mitigate losses by leveraging behaviour-based tools and time-tested management techniques.

• Coordinate third party vendors and assist to resolve technical issues.

• Complete detailed service report & attend meeting for the services/maintenances provided.

• Work in compliance with divisional health, safety and lead or participate any accidents/incidents investigation.

• Develop and maintain company controls standard operating and maintenance procedures.

• Maintains spare parts, supplies and equipment required to support the operation and maintenance.

• This Job description is not comprehensive, and all employees must be flexible, and willing to perform other duties as assigned by their supervisor.

Job Requirement

• Bachelor’s degree in engineering, electrical, electronic, or mechanical engineering preferred.

• Minimum 1~2 years of experience programming Programmable Logic Controllers (PLC), and Human/Machine Interfaces (HMI) using Allen Bradley or Siemens software

• Knowledge in the field of Industrial Automation or similar field.

• Ability to read, understand, and create electrical and control schematics.

• Ability to troubleshoot and debug electrical and control circuits.

• Strong cause-effect analytical abilities to solve problems.

• Ability to manage workload effectively, to plan, organize, and prioritize work and meet deadlines.

• Dynamic team player with interpersonal skills.

• Organized team player, able to work independently

• Articulate in communication (English) and with good writing skills.

Responsibilities

• Assist in maintaining of building facilities on timely - servicing, inspection, equipment re-certification etc..
• Undertake minor repair and maintenance work.
• Conduct daily facilities inspection to identify any defect
• Determine and analyze the cause of defects, breakdowns and faults & provide suggestions to prevent any future occurrences
• Liaise and supervise contractors on facilities repair / renovation works to ensure acceptable standard of work
• Ensure that only authorize users have accessed to locked venue
• Other tasks as assigned by the Management

Requirements:

• Diploma holder in M&E / Civil Engineering or its equivalent
• 2 years of work experience in Facilities & Building Management
• Can work under minimal supervision and is pro-active

• Experience with electrical systems such as schematic, SLD, Layout, Control wiring drawing of MCC, DB lighting boards, soft starters / drives, earthing and lighting layouts.
• Perform daily preventative maintenance and troubleshooting on plant-wide electrical and instrumentation systems. Installation, Configuration, calibration and troubleshooting of PT, DPT, LT, TT and Mass flow meter.
• Hands on experience in BMS with HVAC, MV and LV Electrical systems.
• Conduct of inspection, testing and repair of commissioning equipment on Instrument system, control and component under the maintenance team.
• Condition monitoring and predictive maintenance of critical instruments and take corrective actions to avoid breakdown.
• Having good knowledge in megger test, PI test and gas detectors.
• Timely close all work orders assigned by supervisor in CMMS.
• Knowledge in creating risk assessment for non-routine jobs.
• Follow Instrument maintenance work planning and scheduling including procedures.
• Ensures quality of work within the set time frame, record and report.
• Ability to work on remove and reinstall units, configuring, calibrating and maintaining control, measurement and indicating instrumentation (Pneumatic, analog and digital)
• Coordinate and liaise with contractors in supervision of statutory equipment inspection and testing at site.
• Always follow and make sure plant safety rules and regulations.
• Participate in monthly safety committee meetings.
• Conduct routine 5S at maintenance workshop, store, substations and work area at site.
• Reporting to the supervisor on daily work activity.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Diploma in Control & Instrumentation or equivalent is an advantage.
• At least 5 years of previous experience of working in electrical and instrumentation in Chemical Process or Treatment Plant Industry.
• Experience in DCS and programmable logic controls is an advantage.
• Good verbal and written communication skills.
• Good working knowledge in Microsoft applications (such as Word, Excel, PowerPoint, Project).
• Experience in using CMMS (Computerized Maintenance Management System) is an advantage.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided from Boon Lay MRT station or Choa Chu Kang MRT station.

Job duties:

• Performing electronic products/printed circuit board assembly
• Conducting pcb repair or related services
• Troubleshooting and soldering relevant parts
• Other general duties

Requirements:

• N/O/ITE in any field
• 1 to 3 years assembly technician experience from semiconductor industry

Salary up $2800 + Overtime

Monday to Friday, 8.30 am to 6.30 pm

For interested applicants, please click "Quick Apply”

Alternatively, please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Job Description:

• Responsible for yard machinery and equipment electrical maintenance works
• Ensure workshop and welding machines is in a good working condition
• Supervise and guide maintenance technicians
• Comply to safety standards
• Plan and execute preventive measures

Job Requirements:

• Diploma in Electrical and Electronics Engineering
• Minimum 5 years’ of maintenance working experience in marine shipyard industry
• Hands on experience in welding machine and CNC plate cutting machine troubleshooting works
• Posses good communication skills and be able to relate different levels of people
• Have a good safety mindset and displays good WSH behaviour
• Fresh graduate is welcome to apply, training will be provided

The individual shall report to the Site Manager for the project.

You shall be responsible for the preparation, not limited to, of the Project Quality Plan, ITP, Quality Procedures, Inspection Dossiers, Test Certificates and carrying out stage-wise and final inspection activities.

Your key responsibility is to ensure professional quality control and assurance for the delivery of works in excellent quality in compliance with the client’s requirements.

You shall co-ordinate with project team for all the works requiring your QC expertise/technical support for the works to be carried out effectively and as per specifications.

You shall support the Site Manager in the clearance of certain vendors and NDT contractors (if sourced out).

You shall support in the supervision of works such as fabrication, construction, welding, mechanical, piping and structural installations

You shall randomly check the essential parameters as per the WPS requirements and Quality Procedures, witness PT, MPI, UT, Hardness testing and any other activities requiring your expertise

You shall prepare Stage Inspection Reports as per ITP.

You shall lead the team to co-ordinate Plan and execute NDE works as per requirements and monitor the backing system for welding consumables, pre-heating and inter-pass temperature of Welds

You shall carry out post-test requirements on, but limited to, Bolt, nut, Gaskets and Bolt tightening or torque as per approved procedures, check that the line is complete and ready for test and prepare a punch list of outstanding items.

Ensure final document preparation & review and sign off of all relevant project documents, coordinate with client for the submission of documents as per client requirements.

Customer service oriented mindset

Relevant experience in the Petrol-Chemical Industry

Possess a Bachelor’s degree in Engineering (Mechanical) and/or Sciences

Possess certifications in Non-destructive testing systems / various types of welding / QA/QC certifications, audit compliances and certificates

Relevant experience in welding, NDT methods, total quality management and process

Contract Sterilization Services Pte Ltd, wholly owned subsidiary of Serial System Ltd (a SGX mainboard listed Company), assembles and distributes medical devices. It offers a full range of standard and customised perfusion tubing packs. Marketed all over the Asia Pacific region, these products are the preferred choices of many leading hospitals.

We invite a suitably qualified candidate to fill the following position:

Maintenance Technician

Responsibilities:

• Responsible for M&E matters and facility maintenance
• Perform routine checks and troubleshooting of plant equipment
• Plan maintenance schedule for machines equipment, facilities and breakdown maintenance of the M&E Systems
• Discuss with contractor on machine matter or facility maintenance
• To highlight any follow-up actions from maintenance checklist
• Follow-up actions for yearly equipment and electrical licence application
• Respond to urgent/emergency situations
• Carry out scheduled weekly preventive maintenance and yearly equipment calibration
• Control chemical usage consumption and spare parts control
• Ensure good housekeeping at work areas

Requirements:

• NITEC or Higher Nitec in Mechanical/Electrical with at least three (3) years relevant experience
• Strong in problem solving/analysis
• Able to multi-task
• Able to work in cleanroom environment
• Able to work as a team player
• Possess positive work attitude with on-going learning mindset
• Proficiency in Computer literacy
• Understanding of welding knowledge will be an added advantage

Interested candidates are invited to submit their resumes and expected salary. (In keeping with PDPC’s guidelines, please do not include NRIC No in your resume. We reserve the right not to process any applications that do not adhere to these guidelines.)

We regret that only shortlisted candidates will be notified.

Company Address: 2 Tukang Innovation Grove, #08-05, MEDTECH HUB, Singapore 618305

Job Description:

• Carry out maintenance and troubleshooting of production machines, equipments, toolings and facilities
• Daily tooling setup in accordance with the Work Instruction.
• Carry out Preventive maintenance on production machines, equipments, toolings and facilities according to Preventive Maintenance schedule
• Carry out modification and improvement projects of production machines, equipments, toolings and Facilities
• Schedule and coordinate contractor works to ensure specifications / requirements are met in a timely manner
• Coordinate with Engineer and tooling suppliers on quality issues concerning the tooling based on production output.
• Assist superior in setting up of new equipment, modification, relocation of equipment and other related matters
• Assist superior in inventory control of spare parts
• Maintain and account for workshop tools and equipments and maintain cleanliness in maintenance room
• Any other task assigned by manager such as cost effectiveness, waste reduction, lean, site risk assessment.

Requirement:

• Diploma in Mechanical or Electronic Engineering
• 3-5 years’ related experience in Production environment
• Work independently and with initiative
• Support OT and weekend work is required
• Excellent team player, interpersonal and communication skill

Interested candidates please send Resume in Ms Word format with full Certificate to [email protected]. Regret only shortlisted candidate will be contacted.