Job Description

• Report to the maintenance supervisor.

• Inspect machinery, buildings, electrical systems, piping, and equipment to ensure safe, well-maintained conditions, identify hazards, defects, and the need for adjustment or repair.

• Perform troubleshooting and repairs to the issues identified.

• Perform routine preventive maintenance (oil change, filter replacement, cleaning, bearing etc) to identified equipment/facility.

• Install new machinery, equipment, piping or structure.

• Complete maintenance work orders as assigned and in a timely manner.

• Operate a variety of machinery, equipment and tools including saws, drills, grinders, welding machines, drill presses and various hand tools.

• Maintain inventory of tools, supplies, spare parts, consumables and equipment; recommend tools, supplies, and equipment for purchase.

• Basic ability to read, interpret and work from blueprints, drawings, procedures , or oral instruction on machinery, equipment, piping system or project.

• Install or replace electrical contacts, panel, relays, plugs, switches, outlets.

• Perform other general maintenance tasks including housekeeping, landscaping, painting, and carpentry.

• Ensure replaced parts or equipment are of correct specification and properly tagged.

• Perform assigned responsibilities, duties, and tasks according to established practices, procedures, techniques, standards in a safe manner and with minimal supervision.

• Observe all company and legal, safety, health and quality policies.

• Report quality issues, accidents, safety violations, or other concerns.

• Perform functional test of the repaired item before handling over to the stakeholder.

• Ensure cleanliness, tidiness and safety of work environment.

• Respond to off hours critical calls to resolve facility/equipment issues.

• Perform other tasks as assigned by the supervisor/management.

Job Requirement:

• Forklift license is a plus (if not, training will be provided)
• Min GCE 'N' or 'O' or Nitec is preferred (Electrical / Electronics / Mechanical / Mechatronics or relevant).
• Able to understand basic mechanical/electronics/electrical drawing.
• Knowledge of DCS/PLC programming and instrumentation related skills will be of added advantage.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Mechanical) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): costing, quotations, RFI, Engineering, negotiation, claims, procurement, liaison with clients, liaison with contractors, field engineering
• Preferably Junior Executive specialized in Engineering - Oil/Gas or equivalent. The individual would be required to do site-visit and prepare project costing.
• Regular and timely follow-up with clients to support Request-for-Tenders.
• To smoothly manage a response to 'Request for Tenders' (RFT) or 'Request for Proposals' (RFP) issued by existing or prospective clients.
• This is a key role in the organization. You would require to coordinate with other departments to consolidate the tender submission.
• The parties will include our sub-contractors or joint partners. You are to warrant completeness in submission and put forward the best possible response which will demonstrate value-creation in our tender.
• You will need to assure all deadlines are met as well as manage the graphic design and visual presentation of both hard copy and digital version.
• Close follow-up and strong customer service attitude to handle commercial negotiation

Responsibilities:

• Work as part of a maintenance team ensuring fleet availability for client
• Manage planned maintenance activities
• Conduct troubleshooting of systems onboard vessels
• Supervise and guide workers in mainenance tasks
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task
• Any tasks as directed by Site Manager

Requirements:

• Diploma or NTC in Mechanical or Marine Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to communicate effectively with internal and external stakeholders
• Able to work during weekends and public holidays and on odd-hours
• Willing to work in Brani area, with company transport provided

Other Information:

• Official Work Hours: 7am - 5pm
• 5 Days Week
• Company Transport provided to Gul

• Managing organizational sales by developing a business plan that covers sales, revenue, and expense controls.
• Meeting planned sales goals.
• Setting individual sales targets with the sales team.
• Tracking sales goals and reporting results as necessary.
• Overseeing the activities and performance of the sales team.
• Coordinating with marketing on lead generation.
• The ongoing training of your salespeople.
• Developing your sales team through motivation, counseling, and product knowledge education.
• Promoting the organization and products.
• Understand our ideal customers and how they relate to our products.

• Accomplishes department objectives by supervising staff and organizing and monitoring work processes.
• Maintains staff by recruiting, selecting, orienting, and training employees and developing personal growth opportunities.
• Accomplishes staff job results by coaching, counseling, and disciplining employees.
• Plans, monitors, and appraises job results.
• Conducts training.
• Implements and enforces systems, policies, and procedures.
• Maintains safe and healthy work environment by establishing and enforcing organization standards and adhering to legal regulations.
• Completes operations by developing schedules, assigning and monitoring work, gathering resources, implementing productivity standards, resolving operations problems, maintaining reference manuals, and implementing new procedures.
• Controls expenses by gathering and submitting budget information, scheduling expenditures, monitoring variances, and implementing corrective actions.
• Provides quality service by enforcing quality and customer service standards.
• Contributes to team effort by accomplishing related results as needed.

• Accomplishes department objectives by supervising staff and organizing and monitoring work processes.
• Maintains staff by recruiting, selecting, orienting, and training employees and developing personal growth opportunities.
• Accomplishes staff job results by coaching, counseling, and disciplining employees.
• Plans, monitors, and appraises job results.
• Conducts training.
• Implements and enforces systems, policies, and procedures.
• Maintains safe and healthy work environment by establishing and enforcing organization standards and adhering to legal regulations.
• Completes operations by developing schedules, assigning and monitoring work, gathering resources, implementing productivity standards, resolving operations problems, maintaining reference manuals, and implementing new procedures.
• Controls expenses by gathering and submitting budget information, scheduling expenditures, monitoring variances, and implementing corrective actions.
• Provides quality service by enforcing quality and customer service standards.
• Contributes to team effort by accomplishing related results as needed.

Responsibilities:

1. Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability
2. Optimise spare parts and manage stock effectively by using CMMS TMQ-W.
3. Ensure no down time due to unavailability of spare parts.
4. Service used equipment’s and components and ensure ready to use all time.
5. Analyse and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors.
6. Manage in-house contractors to execute maintenance timely and effectively.
7. Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.
8. Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group.
9. Update long-term maintenance plan for facilities and utility equipment’s.
10. Ensure all maintenance activities comply with AKSS EHS policies.

Requirements:

1. Degree/Diploma in mechanical engineering or the equivalent
2. 3-5 years of experience in Plant & facilities in chemical plant.
3. Basic understanding of maintenance technology manufacturing process plant environment.
4. Demonstrated ability to adjust contractors independently and effectively.
5. Good interpersonal and communication skills

• Attend onboard vessels or carry out repairs in ports / anchorages / shipyards and close monitoring on all repairs
• Responsible for planning & controlling project execution for timely delivery.
• Estimation and costing of repair enquiries.
• Understand technical drawings.
• Provide technical and service report, worklist and all documentations.
• Develop good working relationship with customers and all level within the company.

Requirement

- Diploma or Degree in Marine / Mechanical Engineering

- Possess 3 to 5 years' experience in similar capacity from marine industries.

- Proficiency in Microsoft Office

- Only Singaporean and PR can apply

- Report to the Executive Chairman and assigned leader.

-Lead a team of QA/QC personnel to provide support on quality systems, processes, and procedures to ensure - compliance with Contract, Company’s Projects and maintenance of the Quality system.

- Manage, supervise and guide inspectors, technicians and other staff @ the project sites.

- Devise and plan procedures to inspect and resolve quality assurance issues.

- Responsible to prepare and conduct quality assurance inspections in a systematic manner, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues.

- Prepare quality reports and facilitate for follow-up actions required.

- Supervise and manage contractors, sub-contractors and provide liaising duties with clients to ensure service delivery, ad-hoc works, and all scheduled maintenance and/or project deliverables are done in accordance to the requirements.

- Attend regular project meetings on behalf of the Company with Clients and Clients’ Representatives.

- Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements to meet Company’s quality objectives.

- Ensure professional quality control and assurance for the delivery of works in excellent quality in compliance with the client’s requirements in the set time frame.

- Co-ordinate with project team for all the works requiring your QC expertise/technical support for the works to be carried out effectively and as per given specifications within the set time frame.

- Monitoring all operations that affect quality and project deliverables.

- Review current standards and policies.

- Maintain records of quality reports and relevant documentation.

- Ensure all legal standards are met. Undertakes works assigned by Superior from time to time.

- Perform any other duties as assigned.

Job Description:

• Responsible for yard machinery and equipment electrical maintenance works
• Ensure workshop and welding machines is in a good working condition
• Supervise and guide maintenance technicians
• Comply to safety standards
• Plan and execute preventive measures

Job Requirements:

• Diploma in Electrical and Electronics Engineering
• Minimum 5 years’ of maintenance working experience in marine shipyard industry
• Hands on experience in welding machine and CNC plate cutting machine troubleshooting works
• Posses good communication skills and be able to relate different levels of people
• Have a good safety mindset and displays good WSH behaviour
• Fresh graduate is welcome to apply, training will be provided

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

• Providing all services offered by the salon, which includes hair cutting and styling as well as hair removal and beauty treatments.
• Recruiting salon staff that meets mandatory educational and licensing requirements.
• Preparing work schedules for salon staff.
• Setting goals for each staff member, evaluating staff performance, and providing training and overall guidance.
• Monitoring salon supplies and equipment and ordering new stock as needed.
• Creating and distributing promotional material to attract new clients.
• Addressing and resolving client complaints regarding salon services and employee behavior.
• Processing clients’ payments and maintaining accurate financial records.
• Ensuring that the salon is clean and well-maintained at all times.

Job Description & Requirements

• Responsible for planning and managing food preparation in restaurant/cloud kitchens.
• Develop new menu options based on seasonal changes and customer demand.
• Assist with the preparation and planning of meal designs.
• Ensure that kitchen activities operate in a timely manner.
• Interaction with the customers and resolving the problems and concerns personally.
• Monitor and record inventory, and if necessary, order new supplies.
• Provide support to junior kitchen employees with various tasks including line cooking, food preparation, and dish plating.
• Train the new kitchen employees to meet kitchen standards.
• Create schedules for kitchen employees and evaluate their performance.
• Adhere to and implement sanitation of kitchen utensils and regulations and safety regulations.

Job Description & Requirements

• Responsible for planning and managing food preparation in restaurant/cloud kitchens.
• Develop new menu options based on seasonal changes and customer demand.
• Assist with the preparation and planning of meal designs.
• Ensure that kitchen activities operate in a timely manner.
• Interaction with the customers and resolving the problems and concerns personally.
• Monitor and record inventory, and if necessary, order new supplies.
• Provide support to junior kitchen employees with various tasks including line cooking, food preparation, and dish plating.
• Train the new kitchen employees to meet kitchen standards.
• Create schedules for kitchen employees and evaluate their performance.
• Adhere to and implement sanitation of kitchen utensils and regulations and safety regulations.

Job Summary

Responsible for in-process and final product quality analyses/inspections in compliance with standards and regulatory requirements. Interprets and evaluates the analyses in terms of accuracy and precision compared against established specifications. Identifies ongoing quality issues, prevents potential product issues, and makes suggestions for improvement. Uses various measuring devices, testing equipment, predetermined methods, operations, setups and prescribed specifications to accept or reject products. May work from blueprints, diagrams, dial indicators, present micrometers, scales, fixtures, customer specifications, drawing or inspection instructions checklists.

Job Description

• Responsible for maintaining, troubleshooting and repairing product contact equipment to meet HSE, quality and productivity standards
• Perform maintenance work in accordance to approved SOPs and job plans generated from the preventative and corrective maintenance management system
• Carry out troubleshooting, repair, CM and PM activities for Compounding (Wet process), Filling and packaging critical equipment (CM) while minimizing Production downtime to support reliable manufacturing operations
• Advantage experience in filling and packaging machine
• Oversee and be responsible for contractors/ vendors on site

Requirements

• Minimum qualification in from Higher NITEC in Electrical, Instrument, Mechanical or Electronic Engineering and above
• 3 to 5 years of experience working in the Manufacturing Industry

RESPONSIBILITIES:

1. To plan, prepare and deploy manpower accordingly to assigned projects

2. Read and understand of International Standards such as ASME B31.3, ASME B31.1, ASME sec IX, ASME V, AWS D1.1

3. Read, understand project related ITP, procedures, specification requirements

4. Review documents and ship construction / repair drawings as per specification and class requirements

5. Knowledge / experience in interpreting Structural /Hull Fabrication Drawings

6. Closely follow up with Fit -Up inspection and welding inspection, visual inspection with clients.

7. Monitor and prepare daily work done reports and steel weight calculations on daily basis.

8. Preparing inspection and final work completion reports

9. Able to estimate the scope of works (Cost and Manhours)

10. Monitor and witness NDT, which includes UT,MT,PT and random RT film interpretation with clients

11. Other adhoc duties assigned by Department Manager

REQUIREMENTS:

With experience in Marine Operation and Shipyard environment

At least 5 years of experience

Proficient in PC applications such as MS Word, MS Excel (calculations, vloop)

Able to work overtime and weekends

Job Description & Requirements

Our Quality group ensures every single material inside our products is manufactured, processed, tested, packaged, stored and distributed aligned with our incredibly high standards of quality and meets all regulatory requirements. Partnering across our internal manufacturing facilities, external contract manufacturers and suppliers we create an interdependent global manufacturing network committed to deliver a compliant, reliable supply to customers and patients on time, every time, across the globe.

What will you do

• Responsible for planning, scheduling and performing calibration, maintenance and qualification of laboratory equipment.
• Responsible for maintaining laboratory chemicals and consumables inventories and disposals.
• Responsible for archival/retrieval of retention samples.
• Ensure laboratory equipment calibration, maintenance and qualification within timely manner and in compliance to standard operating procedures with necessary laboratory safety precautions.
• Liaise and coordinate with external service providers in carrying out calibration, maintenance and qualification of laboratory equipment and tools.
• Liaise with external vendors to ensure chemicals and consumables supply continuity.
• Support laboratory investigation on laboratory equipment failure, Out of Tolerance and Out of Specification
• Be the subject matter expert of laboratory maintenance and participate as auditee in site internal audit/external audit.
• Coordinate with laboratory team to ensure equipment availability for calibration, maintenance and troubleshooting work.
• Manage archival/retrieval of record for laboratory calibration, maintenance and qualification related documents.
• Understand customer needs and identifies solutions to non-standard requests by interpreting existing procedures, processes and practices.
• Ensure work and behave in accordance with EHS procedures and guidelines.
• Maintains positive working relationships among employees and fosters an environment where employee engagement, empowerment, teamwork and accountability are the cultural norm.
• Participate in continuous improvement initiative as part of the production system culture in Singapore.
• Participate in EHS, Business Compliance, cGMP and all other compliance-related matters, where applicable.
• Uses formal data based analytical tools (such as Lean Six Sigma process) to identify and implement operating improvement opportunities to eliminate waste, improving accuracy, compliance and productivity.
• Any other duties as assigned by the Senior Manager/Director.

What you must have

To be successful in this role, you will have:

QUALIFICATION:

Bachelor Degree in Science/ Life Science, Pharmacy, Pharmaceutical Science or Engineering or proven relevant experience.

EXPERIENCE:

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria:

• Singaporeans/Singapore PRs only
• PMETs/Mid-Careerist with no prior work experience in Biopharma industry are welcomed to apply
• Open to two years contract
• Minimum 2 years of relevant experience in GMP manufacturing environment, preferably laboratory operations.

QUALIFICATION:

Bachelor Degree in Science/ Life Science, Pharmacy, Pharmaceutical Science or Engineering or proven relevant experience.

Expertise, Professional and Functional Competencies

· A continued improvement mindset.

· Good knowledge and understanding of GMP

· To be familiar with simple statistic to apply statistical analysis and process control techniques.

· Experience in MS-office applications.

· Proficient in English.

Other Personal Attributes:

· Good organization and time management skills.

· Able to work independently.

· Meticulous with high integrity.

· Good interpersonal and communication skills, with ability to work in cross-functional teams.

· Continuous improvement mindset.

· Positive attitude and self-motivated.

Job Description:

- Perform electrical & electronics system and component diagnostic, troubleshooting and repair work on products.

- Perform field service work.

- Analyse and interpret test information to resolve repaired related issues.

- Ensure quality of products delivered to end user.

- Document work procedures based on technical requirements for the MRO components.

- Any ad hoc duties assigned by Engineer.

Job Requirements:

- Diploma/ Nitec in Electrical & Electronics Engineering

- Knowledge in Army systems will be an added advantage

- Competent in electrical & electronics system

- Familiar with PCB, soldering and other electronics components.

- Able to read, interpret understand schematic wiring diagrams and datasheets

- Good communication skills and a team player

- Independent, resourceful and possess a positive attitude.

- Able to understand electrical & electronics failures.

- Able to apply IPC's 7711/7721 and IPC/WHMA-A-620.

Responsibilities:

1. Inspection of Erection Control Panels, Cable Trays, Junction box, Cable ladder, Glanding &Termination as Per Drawing.

2. Supervise the installation of the following:

a. Electrical & Instrumentation panel

b. Cable Ladder & Support Fabrication

c. Electrical & Instrumentation Cables

d. Field Instruments

e. Cable Glanding & Termination Works

f. Instrument Tubings & Fittings

3. Find out & solve the problems on Electrical Control Panel Fault

4. Ability to do fabrication & installation of Various Type of Electrical Panel.

5. Prepare Site Progress Report and Manpower Planning

6. Able to do installation of Marine ICCP, MGPS System.

7. Electrical Megger Test, Continuity Test Reporting

8. Electrical QC Inspection Activities in accordance to the Project Quality Plan.

9. Review of Vendor Documents and Drawings for Electrical System and Devices.

10. Plan, coordinate and supervise maintenance activities carried out by the technicians all related equipment and system in order to meet the required specifications and standard.

11. Execute all related preventive and corrective maintenance for safe practices in accordance with the code of practice and authority’s requirements and guidelines

12. Prepare WCF & MTO Report and submit to the Project Owner & Quantity Surveyor.

13. Supervise and Train workers

14. Supervise site inspection and resolve site matters pertaining to the project, sub-contractors works and progress of works

15. Able to execute Exd & Exe Cable Gland Installation

16. Able to do Tubing and Installation

17. To supervise and must have knowledge in following:

a. Motor Dismantling

b. Cleaning

c. Heating

d. Balancing

e. Painting

f. Greasing

g. Boxup

h. Running test

i. Vibration test

j. Noise Test

k. Temperature check

Requirements:

Atleast 3 years of relevant experience

With experience in Marine Operation and Shipyard environment

With Shipyard Supervisor Safety Certification preferred

Computer Literate

Able to work overtime and weekends

Responsibilities:

• Execute tasks / activities, standard maintenance and repair work such as Preventive, Corrective maintenance project executions at site effectively & efficiently
• Ensure all site executions are performed in accordance with all maintenance work procedures / OEM manuals / Vopak standards to ensure site quality, asset integrity and operability
• Ensure all site executions are performed in accordance with all Local Statutory and Vopak Safety processes to achieve good safety records / results
• Report any problems or issues with site facilities
• Process Permit-to-Work, Job safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute in maintenance documentation review such as Safe Work Procedures (SWP), Job safety Analysis (JSA) and What-If Analysis
• Maintain work progress status and report to Supervisors on daily or adhoc basis
• Perform Work Executor in the Computerized Maintenance Management System (CMMS) workflow to receive, update and close up assigned Work Orders and checklist
• Support Maintenance Supervisor in ensuring that contractors or third party vendors execute maintenance tasks / activities at site effectively and efficiently
• Ensure that contractors carry out tasks/activities that adhered to safety, health and environment regulations and Vopak standards
• Mentor, guide technicians, junior technician in maintenance activities and job competency
• Help out in the supervision of Capex project execution
• Perform equipment or system testing / commissioning / Inspections / Pre-Startup Safety Review (PSSR) to properly handover to the Operations team after maintenance / project completion
• Standby as duty technician for emergency activation to perform corrective maintenance after working hours
• Suggest and execute ideas for continuous improvement in maintenance procedures and processes to improve or optimize maintenance costs, work processes and safety standards
• Assist to lead equipment training to the Operations dept or new trainees
• Practice good housekeeping
• Assist to maintain spare parts inventory levels, support on delivery checks by suppliers and maintain good preservation/housekeeping in the stores
• Only for Maintenance Senior Technicians - to mentor and guide technicians/junior technicians

Requirements:

• 3 years of relevant maintenance experience in similar industry
• ITE or Diploma equivalent in maintenance
• Familiar with and experience in Maintenance and inspection work
• Familiar with and experience in terminal equipment and assets
• Technically sound
• Familiar with terminal equipment and assets
• Familiar with terminal fire-fighting and emergency procedures
• Knowledge of safety, health and environment regulatory and practices
• Compliance with regulatory requirements
• Teamwork
• Mentoring experience is an advantage

Responsibilities:

• Execute tasks / activities, standard maintenance and repair work such as Preventive, Corrective maintenance project executions at site effectively & efficiently
• Ensure all site executions are performed in accordance with all maintenance work procedures / OEM manuals / Vopak standards to ensure site quality, asset integrity and operability
• Ensure all site executions are performed in accordance with all Local Statutory and Vopak Safety processes to achieve good safety records / results
• Report any problems or issues with site facilities
• Process Permit-to-Work, Job safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute in maintenance documentation review such as Safe Work Procedures (SWP), Job safety Analysis (JSA) and What-If Analysis
• Maintain work progress status and report to Supervisors on daily or adhoc basis
• Perform Work Executor in the Computerized Maintenance Management System (CMMS) workflow to receive, update and close up assigned Work Orders and checklist
• Support Maintenance Supervisor in ensuring that contractors or third party vendors execute maintenance tasks / activities at site effectively and efficiently
• Ensure that contractors carry out tasks/activities that adhered to safety, health and environment regulations and Vopak standards
• Mentor, guide technicians, junior technician in maintenance activities and job competency
• Help out in the supervision of Capex project execution
• Perform equipment or system testing / commissioning / Inspections / Pre-Startup Safety Review (PSSR) to properly handover to the Operations team after maintenance / project completion
• Standby as duty technician for emergency activation to perform corrective maintenance after working hours
• Suggest and execute ideas for continuous improvement in maintenance procedures and processes to improve or optimize maintenance costs, work processes and safety standards
• Assist to lead equipment training to the Operations dept or new trainees
• Practice good housekeeping
• Assist to maintain spare parts inventory levels, support on delivery checks by suppliers and maintain good preservation/housekeeping in the stores
• Only for Maintenance Senior Technicians - to mentor and guide technicians/junior technicians

Requirements:

• 3 years of relevant maintenance experience in similar industry
• ITE or Diploma equivalent in maintenance
• Familiar with and experience in Maintenance and inspection work
• Familiar with and experience in terminal equipment and assets
• Technically sound
• Familiar with terminal equipment and assets
• Familiar with terminal fire-fighting and emergency procedures
• Knowledge of safety, health and environment regulatory and practices
• Compliance with regulatory requirements
• Teamwork
• Mentoring experience is an advantage

Mission

Sanofi is building a new state-of-the-art Biologics manufacturing facility, named EVolutive Facility (EVF), in Singapore. EVF will be a first-of-its-kind, fully digitalized, modular manufacturing facility. The facility will be designed to be carbon neutral and allow for future modifications.

Unlike a standard manufacturing facility, the EVF will support multiple manufacturing technology platforms, facilitating rapid and flexible manufacturing of different types of vaccines and biological products, such as mRNA, enzymes and monoclonal antibodies.

EVF Equipment maintenance asset data Intern is expected to assist in overall equipment maintenance setup activities during its Greenfield project phase.

The technician will be guided by EVF engineering maintenance engineer for all the job work related activities.

Key accountabilities

Technician Objective

• To support the site engineering maintenance engineers for all the utilities and process equipment maintenance work of greenfield new Biologics manufacturing facility, which facilitates technology transfer of a new product with advanced technology.

Responsibilities

• Perform plant utilities system (black and clean) and GMP core process equipment preventive and ad-hoc maintenance activities.
• Knowledge and compliance to Good Manufacturing (GMP) and Good Documentation Practices (GDP) supporting a biopharmaceutical Environment.
• Perform daily activities in 12hours shift or Normal shift as planned by management.
• Experience in maintenance activity in utilities (Clean / Black utilities) and process support equipment.
• Actively contribute to resolve problems and seek improvement opportunities within the work assignment.
• Ensure operations related activity and SAP maintenance work is completed according to established procedures and all associated documentation is completed within the timeline.
• Able to support production and maintenance teams on problem solving, troubleshooting and assess the situation understand when to escalate to a higher level.
• Coordinate and supervise contractors / vendors to carry out their duties to make sure maintenance services are successfully carried out.
• Knowledge of maintain and repair of rotating equipment, motor (centrifugal pump, rotary lobe pump, diaphragm pump etc.)
• Knowledge of valve maintenance and repair (PSV, GEMU, control valve, butterfly valve, check valve etc.)
• Knowledge of process equipment (bioreactor, UFDF, biosafety cabinet, centrifuge, column packing, autoclave, washer,
• Onsite support vendor for new equipment installation work.
• Knowledge of boiler, water system, steam generator, HVAC system, cold room etc.
• Responsible for reporting equipment downtime to the maintenance supervisor / manager and assist in identifying and eliminating problems using troubleshooting skill.
• Possess skill in reading Piping & Instrument Diagram (P&ID), identifying LOTO point, onsite pipeline tracing, supporting new maintenance tools setup.
• Work together with the team to use 5S tool to maintain the working environment and perform Kaizen for improvement activities.
• Meet site's safety, health and environmental (SHE) performance objectives.
• Any other duties and ad-hoc support as assigned by engineer/ Manager.

Skills Required

• Good team player willing to work for the common goal.
• Demonstrates an ability and desire to learn from experience.
• Openness to learn and adopt with new environment.
• Good communication skills.
• Willing to take Ownership and learn decision-making skills.
• Professional soft skills to work on technical documentation.

Responsibilities:

•Identifying and reporting on defective plant and equipment

•Carrying out all routine and defect-based maintenance duties in accordance with maintenance plans

•Assisting with the supervision of contractors involved in on-site maintenance.

•Contributing to the development of asset maintenance plans

•Maintaining accurate, up-to-date and timely plant history records of all maintenance events

•Support the operation of plant as required in a safe, efficient and timely manner in accordance with operational guidelines and to meet output requirements

•Responsible for ensuring that assets are operated and maintained to meet performance requirements and providing support for Operations and Maintenance.

•Assist in ensuring that the following maintenance guidelines are followed.

Requirements:

•Preferably Diploma in Electrical or Electronics Engineering or equivalent.

•College academic education may be waived if equivalent, extensive related experience can be demonstrated.

•At least 3 to 5 years of relevant experience in a similar capacity, within a Power plant or related Industries.

•Self-motivated independent and has sound analytical and communication skills and is a team worker.

•Due to exigency of service, may be required to work beyond office hours

Others:

•Working location in Jurong Island

•Scheduled company transport is provided, to/from Jurong East MRT

Interested applicants, please forward your detailed resume including your last drawn salary, expected salary and date of availability to:

[email protected]

Please indicate the position that you are applying on the subject.

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates will be notified)

By submitting your personal data and/or resume to PacificLight (“us”) or to [email protected], you shall be deemed to have given consent to us collecting, using, and disclosing your personal data for the purpose of assessing your job application. Information collected may also be disclosed to PacificLight Group of Companies (“PacificLight”) which includes PacificLight Power Pte. Ltd and PacificLight Energy Pte. Ltd. for this purpose. Please read our privacy policy here.

JOB SUMMARY

General Facility Maintenance Assistant role is to ensure a safe and secure environment in the work premises at all times by keeping a vigilant look-out and reporting any suspicious activities.

RESPONSIBILITIES & DUTIES

The General Facility Maintenance Assistant will be reporting to the HR Executive and will be accountable and authorized for the following:

· Able to perform the essential functions of walking and interacting with employees, tenants and visitors on site.

· Secure the work premises and personnel by monitoring the surroundings through surveillance device/s and patrolling the property where necessary.

· Must be vigilant to the surroundings, ensure safe conditions in the work premise and report any suspicious personnel and activities to the HR Executive and top management immediately.

· Assist visitors to park at the correct location properly while moving their vehicles in a safe manner and within speed limit.

· Record the details of all visitors who enter the premise in the company’s log book before issuing the visitor’s pass and collect the passes upon exit. Update them on the assembly point when there is an emergency evacuation.

· Respond to emergencies to provide necessary assistance to employees, tenants and visitors.

· Assisting procurement/ inventory/ logistics executive as and when required.

· Follow safe work practices and procedures.

· Ensure company and QHSE policies and procedures are adhered to at all times.

· Perform other assignment and duties as and when required.

ACCOUNTABILITIES

· Ensure that all drivers and motorcyclists comply with and follow the company’s policies and procedures accordingly.

· Ensure the security, safety and well-being of all employees, tenants, visitors and the premises.

QUALIFICATION & EXPERIENCE

· Primary level education or equivalent.

· Preferably 2 years of relevant experience in general maintenance activities.

The Maintenance Technician will carry out all planned and unplanned maintenance activities across mechanical & electrical equipment to ensure minimal disruption to the manufacturing process.

Job Responsibilities:

• Execute responsive, preventative and predictive maintenance requirements to all machines/equipment in the Well screen Technologies facility to ensure maximum production levels.
• To perform day to day activities in accordance with the planned maintenance program.
• Carry out daily inspections of all the Well screen Technologies ancillary equipment.
• Maintaining all High and Ultra High Pressure pumps, water chillers, booster pumps, water treatment, slotting machines, weave and plate machines, laser and abrasive removal system as per the maintenance schedule or as required.
• Carrying out upgrades to equipment as and when planned in accordance with safe working practice.

Job Requirement:

• Comfortable working at night/ running night shift during peak season/ as & when required due to critical issues
• working 5 days/ week + OT Comfortable working at Penjuru Pl, Jurong East.
• Min 2 years of experience with manufacturing & maintenance background
• Strong mechanical knowledge in pumps, motors, centrifugal, and double diaphragm pumps.
• Basic electrical & electronic knowledge & experience Willingness in supporting facility maintenance around 5-10% basis.