General Overview

The position is part of the Instrument Control and Electrical(ICE) team who is responsible for overseeing the safe and effective site execution of all electrical maintenance services and activities at the LNG Terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Ensuring compliance with SLNG safety procedures, local and international electrical codes and standards
• Supervising and lead a team of electrical technicians and contractors with installation, maintenance and repair of electrical systems and equipment
• Developing, conducting and ensuring that E&I team members complete the relevant structured on the job training program
• Conducting site work inspection and quality control checks on all electrical works
• Reviewing and approving all electrical isolation permits and excavation permits and other permist that is of electrical and instrument nature.
• Leading the investigation for electrical maintenance abnormality incidents in order to identify root causes of problem as well as recommending and implementing solutions
• Working with SLNG electrical engineers to develop and implement maintenance program for electrical equipment to ensure reliability/resolve any maintenance problems
• Conducting morning tool box meeting with a focus on safety and smooth execution of maintenance activities
• Participating in emergency response procedures and be assigned to any specific roles and responsibilities for such purpose.

Work Experience

• Minimum 8 years (or 15 years for diploma) of experience in an oil and gas/petrochemical E&I maintenance supervisory role
• Expert knowledge and proficiency in low and medium voltage electrical system, power transmission, network communication equipment, Motors, CCTV, security system, Earthing, lightning protection and PLC system is mandatory. Knowledge in DCS an added advantage to excel in the role
• In addition, the successful candidate should possess the following personal attributes:

1. A team player
2. Self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.
3. Possess leadership quality with the ability to inspire and motivate team members to achieve their full potential, driving success and positive outcomes

Education

• Engineering Degree/Diploma preferably in Electrical/Electronic/Instrumentation/Chemical Engineering discipline.

RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• Solicit and chase leads for phone repair services.
• Plan horizontally like selling IT maintenance services to SMEs, Repair department and/or similar phone manufacturers and sellers.
• Troubleshoot PC or mobile phones.
• Perform basic repairs such as changing a phone screen or battery,
• Resolve simple software issues on both iOS and Android devices.
• Plan and sell vertically.
• Assist and follow-up on customers' query when necessary.

Requirements:

• Qualifications from ITE and/or Polytechnics are accepted
• Relevant experience in selling and repairing mobile devices and gadgets will be an added advantage
• Have basic knowledge of computer software/hardware
• Good customer service skills

Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Position Overview

Science Centre Singapore is dedicated to the promotion of interest, learning and creativity in science & technology through imaginative and enjoyable experiences, and to contribute to the nation's development of its human resource.

Join the Exhibitions team and create memorable experience as an Assistant Experience Engineer.

Essential Job Functions

As an Assistant Experience Engineer, you play a pivotal role in developing exhibits and experience, ensuring they operate at the highest level for the enjoyable experience for our guests. Your responsibilities include the following:

- Exhibit checks, reporting, troubleshooting and maintenance of exhibits/exhibitions

- Carry out periodic image back-ups of our exhibits, maintaining the exhibition network and administration of the team’s knowledge management database (storage FTP server)

- Set-up and takedown of Exhibitions

- Exhibit Ideation and Prototyping

- Work on Exhibit Specifications (including providing technical advice for development projects)

Requirements

Knowledge and work experience in the following areas will be an advantage.

Diploma in Industrial Design/Product Design

· Machining, mechanical assembly works, electrical and electronic systems, digital prototyping using CAD (computer-aided Design) software.

· Rapid prototyping, addictive and subtractive fabrication of spare parts and components for exhibits, exhibit housing and experiences.

· Operating woodworking machines such as, the bench saw, planer, routers and stand drill.

· Wood/plastics fabrication works

Diploma in Information Technology or equivalent

· Familiarity with troubleshooting basic computer hardware faults, diagnose software issues within an exhibit and resolve them

Other Skills/Abilities

Having a strong interest in taking apart or fixing things, coupled with the ability to handle basic equipment and tools useful in carrying out the duties within the galleries.

We value qualities such as professionalism, initiative, and quality service in all aspects of interaction with both internal and external customers, collaborative and enthusiastic about learning and acquiring new skills.

Shift Requirements

Rotating 5-day work shifts is a requirement, while duties on weekends and public holidays will be scheduled as and when required.

Only shortlisted candidates will be notified.

Job Description

1. Assisting Finance team in SAP implementation (from version ECC6 to S4Hana).

2. Handles General Ledger.

3. Preparation of GST returns.

4. Prepare the bank reconciliation for all company Bank Accounts.

5. Posting Journals and filings.

6. Perform GL reconciliation & prepare audit schedule.

7. Assisting in Accounts Receivable & Payable function.

8. Assisting with year-end audit and liaising with external auditors.

9. Assisting in month end closing activities and ensure timely closing of accounts.

10. Perform any other duties as assigned by immediate supervisor.

Requirements

1. Minimum Diploma in Accountancy or equivalent.

2. Minimum 5 years’ experience in accounting position (AR/AP/GL).

3. Hands-on knowledge of SAP accounting is required.

4. Good knowledge of MS Excel is an added advantage.

5. Experience in the construction industry is an advantage.

6. Possess strong communication, interpersonal skills, positive attitude, and initiative to learn.

7. Responsible, able to work independently, and be a part of a team player.

8. Immediate availability will be an advantage.

Maintenance Engineer (WDA) 2 year contract

• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on the Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.

WHAT YOU WILL DO

Responsibilities include, but are not limited to:

· Provide technical expertise for all the DPI equipment related activities in the manufacturing process and support Maintenance Technicians.

· Execute maintenance, improvement, DPI maintenance activities, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.

· Utilize technical skills to lead equipment and Utilities system deviation/atypical investigations, safety incidents and ensure effective root cause analysis is conducted.

· Provide solutions to recurring failures by performing RCA and identifying corrective action.

· Implement technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies).

· Responsible for improving the reliability of DPI equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.

Corrective Maintenance

· Ensure resolution and timely follow-up of identified production equipment and facility related equipment issues, unplanned events, and new opportunities identified by Maintenance team.

· Provide technical expertise and support the Maintenance Technicians for equipment breakdown, troubleshooting and recovery to ensure the timely and effective resolution of issues.

· Ensure equipment breakdowns are resolved in a timely manner and update the Preventive Maintenance Plan.

· Apply effective root cause analysis and troubleshooting Techniques to support the resolution of equipment-related incident and deviation/atypical investigation.

Preventive Maintenance

· Ensure all planned internal and external Preventive Maintenance (PM) activities are executed and completed.

· Update equipment critical spare part list and set minimum re-order levels.

· Review existing maintenance RAs promptly and to develop new one when necessary.

Compliance – Safety

· Participate in and support the implementation of actions for Incident Investigations and Audits

· Ensure required risk assessments, including HAZOPS, are carried out in a timely manner, recommendations provided, and implemented as agreed.

· Ensure permit requirements met IPT maintenance activities.

• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.

Compliance – Quality & Change control

· Prepare SOPs and Job Aids to ensure compliance with regulatory standards and ensure PM related documents are generated and maintained according to required standards and frequency.

· Ensure all deviations/atypical and customer complaints are fully investigated with any equipment related actions effectively implemented within the agreed time frame to continually improve processes, prevent waste, and eliminate rework.

· Ensure all out-of-tolerance equipment findings are appropriately documented and investigated in a timely manner.

· Support implementation of Equipment change by participating in impact assessments and executing field equipment modifications, including management of project schedules, resource plans, vendor coordination, and material purchases.

· Prepare and complete IQ, OQ documentation and ensure that documentation meets required regulatory standards.

Equipment reliability

· Utilize Lean Six Sigma Tools, such as Six Sigma, Kaizen, SMED, and 5S, to support execution of continuous improvement and OE projects intended to increase agility, flow and throughput, and also to reduce cycle time and inventory.

· Support development of a continuous improvement framework within the maintenance group and works with the Maintenance Lead to identify opportunities.

· Lead plant improvement processes to enhance availability, reliability, cost-effectiveness and efficiency of the plant.

· Collect and analyze data and follow up with recommendation to improve equipment’s reliability and reduce equipment failures. Work with COE’s to execute a Reliability-Centered Maintenance (RCM) plan and to share best practices and lessons learned, with objective of improving asset utilization.

· Participate in equipment/system-based Root Cause Failure Analysis (RCFA) investigations and update equipment reliability plans.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering
• 3-5 years of maintenance work experience in Pharmaceutical (Preferred), Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Knowledge of parts inventory management, mechanical and electrical equipment design reliability principles
• Project management skill, including problem-solving, developing and implementing technical solutions.
• Experience in HVAC and water system operation and maintenance principle.

We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another’s thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace

Job Description

• Ensure to achieve Company’s targeted yearly turnover.
• Ensures timely kick-off and proper handing-over of newly secured projects.
• Participates in project budget reviews and provide advice when required.
• Liaises with relevant parties to ensure all project disputes/ clarifications are settled.
• Attend site meeting, liaise with clients, subcontractors and suppliers and to ensure proper documentation. Sources, identify and secure new business opportunities for the Company.
• Ensuring all contractual requirements of all projects are fully complied with and responding to all contractual matters involving cost and time implications.
• Preparing tender documents and quantities, providing cost estimates, evaluating tender proposals, conducting project feasibility studies and managing cost information for all projects Assist on any contractual issues with client, subcontractor and consultants.
• Negotiate commercial terms conditions for new and existing contracts
• Involve project budgeting, controlling of cash flow and cost, processing of claims, contract payments and settlement of final accounts as well as maintaining proper documentation
• previous experience with façade would be advantage.
• Candidate must possess at least a Diploma, Professional Degree, Quantity Survey, Civil Engineering or equivalent.
• Required skill(s): AutoCad.
• Applicants must be willing to work in Gul Circle. 5.5workweek.

Job Description & Requirements

A professional who drives clients around in an efficient, safe and timely manner.

• Delivering packages to customers in a timely manner.
• Picking up office purchases or other administrative needs.
• Utilizing navigation apps to find the most optimal route.
• Interacting with clients in professional conduct.
• Working at night and on weekends.
• Maintaining an organized travel schedule.
• Ensuring that vehicles have sufficient gas and are always ready for use.
• Arranging for vehicle repairs when necessary.
• Updating monthly mileage records

Driver Requirements:

• A valid driver's license.
• 4-5 year driving experience.
• Extensive knowledge of the operating area.
• Physical strength and ability to lift up to 70 pounds.
• Excellent organizational and time management skills.
• Exceptional interpersonal skills.
• Good verbal communication.
• Proficiency using GPS device.

Job Description & Requirements

Requirements:

• High school diploma.
• A relevant degree, certification, or license may be required.
• Experience as a technician.
• A driver's license.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.
• Negotiating with suppliers and clients.
• Writing up reports, safety regulations, and preventative maintenance plans.
• Fabricating any components required.
• Providing time and material cost estimates before starting a job.

Job Description & Requirements

Job Description & Requirements

• Answers the telephone and provides exceptional customer service to internal and external customers.
• Drafts reports and correspondence.
• Orders supplies and equipment; maintains service contracts on office equipment.
• Attends meetings and takes meeting notes.
• Liaises with internal and external units to carryout job tasks.
• Assists managers and supervisors in developing policies and procedures.
• Provides front desk coverage as needed for backup.
• Ensures travel authorizations, accommodations, and conference registrations for employees.
• Audits/processes travel expense claims.
• Handles mileage reimbursement requests for supervision travel.
• Performs tracking and distributes monthly travel reports.
• Maintains accounts payable and accounts receivable records.
• Solves problems associated with vendors regarding shipments, billing, and statements.
• Monitors expenditures, processes payment requests for reimbursement; prepares purchase orders, purchase requisitions and ensures proper procedures for paying service providers, consultants, and contractors.
• Receives and audits invoices for accuracy and compliance and ensures prompt payment of departmental bills.
• Handles administrative tasks for faculty searches and staff recruiting.
• Handles event planning for meetings, professional development, and other department initiatives.
• Performs other related duties as assigned.

About the role

Jios Aerogel Pte. Ltd. is seeking a skilled Maintenance Technician to join our team in the West Region. This full-time position is integral to ensuring the smooth and efficient operation of our state-of-the-art industrial facilities. As a Maintenance Technician, you will play a crucial role in maintaining and repairing equipment, troubleshooting issues, and implementing preventative maintenance strategies to support our production processes.

What you'll be doing

• Perform routine maintenance, inspections, and repairs on a variety of industrial equipment and machinery
• Diagnose and troubleshoot equipment malfunctions, identify and resolve issues to minimise downtime
• Maintain detailed records of all maintenance activities, parts used, and repairs completed
• Collaborate with the production team to ensure equipment is operating at optimal performance
• Implement preventative maintenance schedules and procedures to proactively identify and address potential issues
• Assist with the installation and commissioning of new equipment and systems
• Comply with all health, safety, and environmental regulations and protocols

What we're looking for

• Relevant technical diploma or certification in industrial maintenance or a related field
• Minimum 2-3 years of hands-on experience as a Maintenance Technician or in a similar role
• Strong problem-solving and troubleshooting skills, with the ability to diagnose and resolve equipment issues
• Proficient in the use of tools, equipment, and software used in industrial maintenance
• Excellent attention to detail and the ability to maintain detailed records
• Commitment to working safely and following all relevant procedures and regulations
• Ability to work independently as well as part of a team

What we offer

At Jios Aerogel Pte. Ltd., we are committed to providing a rewarding and supportive work environment for our employees. In addition to a competitive salary, we offer a range of benefits, including:

• Comprehensive health insurance package
• Generous retirement contribution plan
• Opportunities for career development and training
• 9.00am – 5.30pm (Pick Up Jurong East MRT @8.20am to Pioneer Road)

Responsibilities:

• Maintain Troubleshoot, repair, services & maintain.
• Perform on-site and in-house Conyrol and services / repair.
• Complying with service standards, work instructions and customers' requirements.
• Servicing works (maintenance service, chemical treatment, overhaul treatment and etc.)
• Carry out preventive and breakdown maintenance.
• Trouble shoot and resolve technical issues.
• Testing and commissioning of the equipment.
• Report all problems identified during preventive maintenance and carry out repair works.
• Ensure drain pipe is free of dust/dirt and draining properly.
• Performing jobs promptly and efficiently.
• Lead the team of technicians to carry out work efficiently.
• Send workers from Place of Stay to various work sites and vice versa.
• Purchase, collection and delivery of materials/goods from supplier or vendor to sites.
• Perform loading and unloading of goods/materials.
• Ensure timely delivery of goods/materials to sites.
• Perform basic maintenance / upkeeping of vehicle.
• Any other duties as assigned.

Requirements:

• Preferably at least 4 years of relevant supervisory and hands-on experiences in maintenance, troubleshooting and systems.
• Must be independent and must be able to lead the team of technicians.
• Able to work under pressure and in a fast-paced environment.
• Physical work required and be able to work long hours.
• Class 3 with forlift licence.
• All races welcome.

Benefits:

• Basic Salary up to $2,500 with yearly increment based on performance.
• Working pattern (4/3/4/3)
• Working timing 8:30am to 9:00pm
• Fixed attendance allowance of $200 per month
• Guaranteed AWS + OT pay eligible
• Performance bonus
• 1 year cash completion bonus
• Our company emphasises on good career progression.

Job Description:

This is a full time role for a Preventive Maintenance Technician (Semiconductor) located in Woodlands. Our clients are headquartered in the USA and established as the global key leader in the Semiconductor industry. You will be following the daily preventive maintenance schedule, managing the arrangement and logistics of new and old parts, and preparing and maintaining PM jigs and tools. Key tasks involve performing preventive maintenance on robots, such as cleaning and greasing parts, and replacing sensors, motors, and motor drivers. The role also requires the installation of vacuum valves, fore line pipes, and heater jackets. Additionally, the individual will assist tool owner engineers with technical activities like troubleshooting, modifications, installations, and de-installations in the fabrication area. Support for 6S practices, including parts cleaning, organization, labeling, and housekeeping, is also a significant part of the job.

Qualifications:

• Min. NITEC or Diploma in any Engineering field or equivalent certification
• Willing to do hands-on work and comfortable to be in cleanroom suit
• Work experience in semiconductor industry will be an added advantage

* This is a 3 months Contract role (subject to extension/conversion) *

Key Responsibilities:

• Attend to daily facility preventive/corrective maintenance work
• Able to perform electrical work on lightings and auto doors
• Able to perform labour work such as roof top cleaning, drain cleaning, wall painting and minor wall plastering work.
• Ensure all practices are safe according to safety practices.

Job Requirements:

• Candidate should possess at least a NTC 3/ NITEC certification in Electrical, Mechanical or Facility Technology.
• Basic knowledge on plumbing, fire alarm system and air con system.
• Preferably to have scissor lift, boom lift and forklift licence.

Responsibilities:

1. Team Leadership

• Lead, supervise, and mentor a team of air conditioning repair and maintenance technicians.
• Provide ongoing training and development opportunities for the team. Foster a positive and collaborative work environment.

2. Service Coordination

• Develop and implement efficient repair and maintenance schedules.
• Coordinate service calls, prioritize tasks, and allocate resources effectively.
• Ensure prompt response to emergency repair requests.

3. Technical Expertise

• Stay updated on industry trends, new technologies, and advancements in air conditioning systems.
• Identify opportunities for process improvement and implement best practices.
• Provide technical guidance and support to technicians in troubleshooting and resolving complex issues.

4. Customer Satisfaction:

• Establish and maintain strong relationships with clients.
• Address customer inquiries, concerns, and ensure high levels of satisfaction.

5. Budget Management:

• Develop and manage the departmental budget, ensuring cost-effective operations.
• Monitor expenses, analyse budget variances, and implement cost-saving measures.

6. Compliance and Safety:

• Ensure compliance with industry regulations, safety standards, and company policies.
• Implement and enforce safety protocols to ensure the well-being of employees and customers.

7. Inventory Management:

• Manage and control the inventory of spare parts and equipment.
• Coordinate with suppliers to ensure the availability of required materials for repairs.
• Generate regular reports on repair and maintenance activities, including key performance indicators (KPIs).

8. Reporting:

• Provide updates to senior management on departmental performance and challenges.

Requirements:

• Possess a Singapore Class 3 license will be an added advantage.
• Minimum diploma in Electrical, Mechanical or Electronic field.
• At least 3 years of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.
• Positive attitude, good interpersonal & customer-centric skills.
• Experience in air-conditioning repair & maintenance.
• Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.
• Ability to work independently and collaboratively in a team.
• No experience is also welcome to join as apprentice.

Working Location:

Sungei Kadut

• Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• Only shortlisted candidates will be notified.

Job Description & Requirements

Job Description:

• Quantity take-off and cost estimation sourcing of contractors and suppliers
• Understanding the requirements, prepare and submit tenders with specific deadline
• Liaise and coordinate with the Consultants, Clients and Sub-contractors
• Contract and tender document administration
• Collaborate with project team and tender department to ensure all drawings are in order as per design requirements.

Requirements:

• Degree/Diploma in Quantity Surveying Mechanical Engineering (P&S, ELECTRICAL or ACMV & etc)
• Minimum 2-3 years relevant experience in building and construction industries.
• Fresh graduate is welcome to apply
• Possess strong project organizational skills, resourceful, energetic and able to work independently as well as in a team
• Good communication, interpersonal and problem solving skills

Please indicate the below information in your resume:

o Current & expected salary

o Reason(s) for Leaving

o Availability to commence work

As an Air Conditioning Repair & Servicing Technician, your main duties is to service, troubleshoot and repair air conditioning systems to ensure optimal performance and indoor air quality. This role involves diagnosing issues, performing repairs, and conducting routine maintenance to enhance system efficiency and customer satisfaction.

Job Description:

• Collect the spare parts from the warehouse store based on the daily job indicated on the tablet.
• Troubleshoot and resolve issues on malfunctioned HVAC systems.
• Wash and clean all dismantled parts to improve efficiency and air quality.
• Refill refrigerants by replenishing and fixing leaks as needed.
• Communicate with clients with regards to problems in equipment and post-jobs reports.
• Ensure safe-keeping of hand tools and maintain good housekeeping.
• Must wear personal protective equipment (PPE) when necessary (e.g. googles, earplugs, respirators, safety harnesses, safety shoes, helmets, sunscreen).
• Ensure all works are carried out safely in accordance with safety procedures and practicing of Workplace Safety and Health (WSH) Act.
• Provide technical advice and assistance on all maintenance functions.
• Prepare service reports after every completed job for customer's endorsement.
• Handle any ad-hoc projects and duties assigned by reporting manager and/or management.

Job Requirements:

• Possess a Singapore Class 3 license will be an added advantage.
• Minimum Nitec / NTC 2 or 3 certificates in Electrical, Mechanical or Electronic field.
• At least 1 year of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.
• Positive attitude, good interpersonal & customer-centric skills.
• Experience in air-conditioning repair & maintenance.
• Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.
• Ability to work independently and collaboratively in a team.
• No experience is also welcome to join as apprentice.

Key Responsibilities

• Repair and soldering of PCB boards.
• Handle repair works of electronics / electrical components of equipment
• Handle parts teardown, re-assembly, re-certification and qualification
• Conduct inspections and measurements to maintain high-quality standards.
• Assist and support fellow team members as needed.
• Meet productivity and quality goals.
• Any other ad-hoc duties.

Requirements

• Minimum GCE O Level/NITEC
• Experienced in troubleshooting Electronics / Electrical component
• Soldering experience is advantageous

Working Location:

Sungei Kadut

• Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• Only shortlisted candidates will be notified

Key Responsibilities

• Repair and soldering of PCB boards.
• Handle repair works of electronics / electrical components of equipment
• Handle parts teardown, re-assembly, re-certification and qualification
• Conduct inspections and measurements to maintain high-quality standards.
• Assist and support fellow team members as needed.
• Meet productivity and quality goals.
• Any other ad-hoc duties.

Requirements

• Minimum GCE O Level/NITEC
• Experienced in troubleshooting Electronics / Electrical component
• Soldering experience is advantageous

Working Location:

Sungei Kadut

• Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• Only shortlisted candidates will be notified

Responsibilities:

• Full spectrum of secretarial support to Chairman & CEO.
• Provide support to the daily activities of the Chairman & CEO including emails and meeting arrangement.
• Prepare reports, documents and presentation materials to be used by Chairman & CEO including co-ordination.
• Arrange internal and external meetings.
• Handle travel arrangements – flight reservation, hotel accommodation, visa applications etc.
• Attend to Chairman & CEO’s personal work.
• Any other duties as required by the Chairman & CEO.
• Can be travelling frequently.
• Explore business opportunity.
• Follow-up on sales enquiries email.

Requirements:

• Possess at least a diploma/degree.
• Minimum 2 years of experience in similar capacity, preferably in construction industry.
• Possess excellent interpersonal and communications skills.
• Able to speak fluently and write well in English and Mandarin - to communicate with Mandarin speaking associates.
• Good initiative, well organized, meticulous and able to work independently.
• Preferably Managers specializing in Secretarial/Executive & Personal Assistant or equivalent.
• Full-Time position(s) available.
• Proficient with MS Office.
• Ability to thrive in a fast-paced environment.
• Willingness to relocate to the West (near Gul Circle MRT)
• Availability to work 5.5 days per week.

Job Description

· Monitor the machines and company equipments operational performance and condition

· Conduct preventive maintenance to machine and company equipments as per schedule

· Review and update all existing machine maintenance documents

· Prepare and design the spare parts for machines and company equipments

· Report any unsafe conditions and practices to Production Manager

· Assist of production and purchasing department of manufacturing / purchasing spare parts

· Monitor spare parts stock level and raising purchase order

· Involve in the implementation and continuous maintenance of HSE Management System

· Perform any other duties assigned by the Production Manager

Job Requirements

Knowledge of precision machining machineries, equipment and facilities

Knowledge of repair and maintenance on machineries and equipment

Knowledge of Environment, Health & Safety

Diploma in Mechanical, Electrical or Mechatronic Engineering

5 years experience in machine repair and maintenance

Job Summary:

Salary: Up to $3,700
Working Days: Monday – Friday (8.30am - 5.30pm), Saturday (8.30am - 12.30pm)
Location of work: TUAS AVE

Variable Bonus

Job Responsibilities:

• Manage and guide a team of technicians to perform vehicle service (commercial vehicles) and repair with excellent quality, turnaround time and productivity to meet customers’ requirement
• Ensure repair work is up to standard as to avoid comeback job
• Troubleshoot technical problems by using of electronic diagnostic tools, identify defects and repair actions, parts requirements for repair
• Advice on repair status to supervisor
• Test drive vehicle after repair when necessary
• Supervise and control of spares used on contract vehicles
• Ensure all work carried out are in accordance with safety and housekeeping requirements
• Assist Customer Service personnel in providing quotation for repair work
• Any other duties assigned by Supervisor

Requirements:

• Minimum Nitec in Automotive related courses or relevant certification
• Possessed Class 4 License is added advantage

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

General Summary:

Position is reporting to Maintenance Manager and responsible for completing maintenance assignments to build, repair and/or maintain all equipment in good operating condition as quickly and accurately as possible; while keeping associated costs to a minimum and meet plant’s goals.

Essential Duties & Responsibilities

• Completes projects (CAPEX and Cost Opportunity Improvement) with minimal guidance showing a proactive attitude to design and installations.
• Manage technician, inhouse contractor and external contractor.
• Leading yearly LSS Cost improvement project and sustainability project.
• Troubleshoots mechanical devices in operation. Dismantles and examines devices to gain access to and remove defective parts. Adjusts functional parts of devices and control instruments, repairs or replaces defective parts.
• Troubleshoots and repairs input/output devices using PLC systems.
• Troubleshoots, completes, designs, upgrades and installs electrical equipment, circuits and systems.
• Troubleshoots, repairs/replace electrical components at the component level.
• Sets up and operates shop machinery such as lathe, drill press, grinders, band saws, cutting torch, welder. etc. Uses hand tools and pneumatic tools to modify or repair parts and equipment.
• Installs new or repairs/modify hydraulic and pneumatic equipment as needed.
• Improves reliability and uptime of all equipment. Takes a proactive approach to equipment issues with a preventive maintenance mentality.
• Operates and manage the cooling water and waste water system in compliance with NEA regulations.
• Manage forklift and hydraulic working platform as needed with contractor.
• Researches supplies, parts and machines needed to complete work orders.
• Assists in organizing and maintaining an accurate inventory of parts.
• Performs and documents work orders and preventative maintenance tasks as assigned.
• Documents work completed. Contributes to upkeep and updating of required paperwork such as records, maintenance logs, documents, manuals, drawings, PM logs, etc.
• Supports the vision, mission and guiding principles of the company.
• Follows applicable ISO, Safety, Health and Environmental rules and guidelines while performing any procedure.
• Maintains departmental housekeeping standards.
• As needed, covers for Maintenance Supervisor when Supervisor is not present.
• Other duties as assigned.

Qualifications - External

Competencies

• Manufacturing/Maintenance - Electrical Certification or License
• Personal Skills - Manual Dexterity
• Personal Skills - Statistical Skills
• Personal Skills - Research
• Personal Skills - Quantitative Skills
• Personal Skills - Reading/Comprehension
• Personal Skills - Self Motivated
• Software Skills - Microsoft Office
• Personal Skills - Time/Priority Management
• Software Skills - Microsoft Word
• Software Skills - Internet
• Software Skills - Microsoft Excel
• Personal Skills - Ability to Multitask
• Personal Skills - Organizational Skllls

Education and experience

• Min Diploma Degree in Mechatronics, Electrical and Electronics, or equivalent
• Manufacturing - Carpentry
• Manufacturing - Electrical
• Manufacturing - Welding/Brazing
• Manufacturing - Refrigeration
• Manufacturing - Forklift
• Manufacturing - Machine
• Manufacturing - Mechanical
• Manufacturing - Pneumatics
• Manufacturing - Plumbing
• Manufacturing - Construction
• Manufacturing - Hydraulics
• Manufacturing - PLC Troubleshooting and Repair
• Manufacturing - Industrial Operations
• Cross Functional - Process Improvement

Physical Demands

• While performing the duties of this job, the employee is regularly required to stand; walk; stoop, kneel, crouch or crawl; use hands to finger, handle, or feel objects, tools, or controls; talk and/or hear, and taste or smell.
• Occasionally required to sit.
• The employee must frequently lift and/or move up to 55 pounds and occasionally handle up to 250 pounds.
• Specific vision abilities may require close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Requires the use of safety equipment as dictated by the work area such as safety glasses and shoes, dust mask, hard hat, respirator, face shield, hearing protection, chemical suit, gloves, aprons, etc.
• The noise level in the work environment is usually moderate with the exception of high noise areas. Proper safety personnel equipment needs to be used while performing this job and that equipment is dictated by the plant Safety guidelines.
• Occasionally works in heights exceeding 30 feet.
• While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions, dust, fumes, airborne particles, chemical dust, risk of electric shock, vibration, non-hazardous chemical agents, and outside weather conditions. The employee is occasionally exposed to moving mechanical parts.

Environmental, Health, Safety, & Security (EHS&S) Requirements

• Avient integrates EHS&S into all aspects of our operations. Each position at Avient is responsible for complying with all applicable EHS&S requirements. Additionally, employees and management are responsible for reporting all EHS&S incidents immediately to ensure we keep EHS&S a priority within the organization.
• Security includes physical security and cyber security.

Who We Are

Avient Corporation provides specialized and sustainable material solutions that transform customer challenges into opportunities, bringing new products to life for a better world. Examples include:

• Dyneema®, the world’s strongest fiber™, enables unmatched levels of performance and protection for end-use applications, including ballistic personal protection, marine and sustainable infrastructure and outdoor sports
• Unique technologies that improve the recyclability of products and enable recycled content to be incorporated, thus advancing a more circular economy
• Light-weighting solutions that replace heavier traditional materials like metal, glass and wood, which can improve fuel efficiency in all modes of transportation and reduce carbon footprint
• Sustainable infrastructure solutions that increase energy efficiency, renewable energy, natural resource conservation and fiber optic / 5G network accessibility

Avient employs approximately 10,000 associates and is certified ACC Responsible Care®, a founding member of the Alliance to End Plastic Waste and certified Great Place to Work®. For more information, visit www.avient.com.

Why Avient

Avient Corporation is a world-class sustainable organization built on innovation, collaboration, and employee development. We are committed to providing a supportive and dynamic work environment where our diverse associates can grow and succeed, as well positively impacting our planet and the communities we serve. Our Great Place to Work culture, values, and benefits make Avient an employer of choice for top talent.

At Avient, we believe diversity of ideas and backgrounds gives us the creativity to be successful in a rapidly changing world. In support of this, we stress equality of opportunity for all qualified individuals in accordance with applicable laws. Decisions on hiring, promotion, development, compensation or advancement are based solely on a person’s qualifications, abilities, experience and performance.

Avient Corporation is a drug free workplace. Avient is an equal opportunity employer. We maintain a policy of non-discrimination in providing equal employment to all qualified employees and candidates regardless of race, sex, sexual orientation, gender identity, age, color, religion, national origin, disability, genetic information, protected veteran’s status, or other legally protected classification in accordance with applicable federal, state and local law.

Responsibilities

• Assist in maintaining of building facilities on timely - servicing, inspection, equipment re-certification etc..
• Undertake minor repair and maintenance work.
• Conduct daily facilities inspection to identify any defect
• Determine and analyze the cause of defects, breakdowns and faults & provide suggestions to prevent any future occurrences
• Liaise and supervise contractors on facilities repair / renovation works to ensure acceptable standard of work
• Ensure that only authorize users have accessed to locked venue
• Other tasks as assigned by the Management

Requirements:

• Diploma holder in M&E / Civil Engineering or its equivalent
• 2 years of work experience in Facilities & Building Management
• Can work under minimal supervision and is pro-active

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Maintenance Engineer – SAP Plant Maintenance SME to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Oversee the implementation of SAP

· Gather all relevant documentation from Site Leaders and EPCM project managers.

· Lead and guide the implementation team to ensure consistent progress and achievement of project timelines.

· Plan and monitor project execution by organizing regular meetings with stakeholders and the project team.

· Identify and address project challenges, gaps, and risks to facilitate smooth execution.

· Responsible for collecting and validating PM Master Data in accordance with SAP and cGMP standards.

· Oversee the complete loading of PM Master Data, including Floc, Equipment, PM Task Lists, and BOM.

· Report on project progress and status in global meetings, escalating any challenges as needed.

· Conduct walkdowns with the EPCM team for electrical and instrumentation disciplines.

· Ensure the EPCM team calibrates plant instruments in compliance with site standards.

· Obtain spare parts quotes and review technical specifications against engineering documents.

· Create and establish BOM for plant assets, including mechanical equipment and instruments.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.