The Technician supports the execution and maintenance of safe and reliable plant operations.

Job Description:

• Carry out blending process operations, perform filling of blended products into drums and isotainers in a safe and efficient manner.

• Carry out chemical additives transfer between bulk packages (tank farm storage tanks, marine vessel bulk) and smaller packages (isotainers, IBCs and drums).

• Control inventory (physical & documentary aspect), including tank gauging & sampling.

• Conduct line pigging and equipment flushing during batch changeover and handle regular start up, shutdown and commissioning of critical process equipment.

• Manage isotainer and storage tank heating in a safe manner.

• Operate plant air compressor, steam boilers, hot oil furnace, pumps, heat exchangers, rotary equipment etc. in a safe manner.

• Carry out minor maintenance work, 5S improvement projects and energy conservation initiatives.

• Adhere to all in house safety, security, industrial hygiene standards and HSES & Quality regulations.

• Able to handle forklift equipment, training will be provided.

• Perform any other production duties assigned by the Operations Superintendent.

Requirements:

• Minimum NITEC in any Engineering or Technical field.

• Minimum experience equivalent to 2 years in a manufacturing environment.

• Prior technical experience in chemical company or prior working experience in a lubricant blending company would be an advantage.

• Able to perform night duty when required.

• Good technical skills in handling rotary equipment & pipeline operations.

• Basic knowledge in Microsoft Office Excel, Word, etc.

Responsibilities

• Lead the Mechanical Department and make sure everything runs smoothly and on time.
• Handle mechanical repairs and updates for commercial ships.
• Ensure production meets customer standards and expectations.
• Assign projects to supervisors.
• Make sure mechanical jobs are finished on schedule.
• Review and evaluate staff performance.
• Check progress of work on board or in the workshop.
• Plan department staffing needs.
• Identify and arrange training for staff.
• Oversee staff training and skill improvement in ship repair.
• Improve work quality in the department.
• Monitor and review safety and hazard reports.
• Implement safety plans for the department.
• Conduct safety audits for departmental practices and staff.
• Keep track of subcontractor working hours.

Requirements

• The ideal candidates should possess strong knowledge and experience in areas such as propulsion, shaft alignment, thrusters, and CPP. A degree or diploma in Mechanical Engineering is required, along with 4 to 8 years of experience in the shipyard or marine industry.

Benefits

• Free parking
• Professional development
• Car allowance

Working Hours

• Monday to Saturday
• 0800 to 1700hr (Mon – Fri)
• 0800 to 1200hr (Sat)

Job Description:

1. Supervise staffs to ensure productivity & quality requirement & delivery schedules are met.

2. Monitor print quality to ensure it meets customers standards

3. Liaise & coordinate with all relevant internal functional sections on specific job-related issues to enhance job logistics

4. Monitor press capacities to ensure it meet the demand of monthly job loading

5. Liaise with Engineering section to ensure machines readiness is at highest-level

6. Ensure staffs’ discipline compliance to operating/housekeeping/safety practices

Requirements:

1. Min 5-years working experience as Production Supervisor in offset printing industry

2. Require strong verbal & writtern communication skills

3. Strictly No Colour Blindness

4. Able to work on rotation shift

Job Description:

1. Create and Maintain Production schedules to ensure company goals are achieved and that deadlines are met.

2. Managing multiple simultaneous production schedules.

3. Collaborate with other departments, include purchasing, engineering and logistics, to work on outsourcing cost, equipment maintenance schedule and delivery arrangement.

4. Optimizing production workflow and performance.

5. Liaise with External vendor on any outsource jobs, monitor jobs ensure it met the required delivery.

Requirements:

1. Diploma in Business/Production management or equivalent experience.

2. Able to work in dynamic environment and equipped with Multitasking skills.

3. Possess Critical thinking and problem-solving skills.

4. Strong computer skills and knowledge of Microsoft Office applications.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a SOP Writer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

• Drafting SOPs in clear, concise language, ensuring consistent and user-friendly formatting.
• Work with relevant stakeholders, such as department heads, supervisors, and quality assurance teams, to review and update SOPs as necessary.
• Assist in developing training materials based on SOPs to ensure employees receive proper training on procedures.
• Engage in continuous improvement initiatives by identifying opportunities to streamline processes, enhance clarity in SOPs, and improve operational efficiency and effectiveness.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Scope

1) To assist the Production Manager to plan job assignment to staffs, and manage the packing, incoming and outgoing processes.

2) To ensure good customer service and quality product to customers.

3) To meet target for all job orders for the day and ensure effectiveness of the team.

4) Assist in process improvement projects undertake by the Manager.

5) Train and guide all staffs to be in compliance of GMP, FSMS and ISO22000.

6) Maintain all equipments and cleanliness in the production room to ensure the compliance to standards.

7) Ensure and implement projects to a safe working environment in the production room.

Requirements

1) Experience in Fresh Produce Production an advantage.

2) Knowledge of cold chain supply and Good Manufacturing Practice for better control between processes.

3) Good work attitude, able to communicate effectively with co-workers.

4) Able to use basic software (Words, Excel, Powerpoint etc) for analytical and presentation purposes.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

1. Scheduling of all incoming jobs and ensure close monitoring and timely delivery.

2. Assist the Production Manager in taking charge of all jobs whenever necessary and ensure delegation and coordination on the necessary works.

3. Understand the full requirements of all manufacturing, servicing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.

4. Ensure that all budgets and plans are met.

5. Assist the Production Manager to monitor and manage workshop loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans whenever necessary.

6. Organize weekly production meeting to provide status update to all relevant departments and iron out related production issues.

7. Assist the Production Manager to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.

8. Assist the Production Manager to identify the skill level of production employees and distribute suitable work tasks to achieve higher throughput whenever necessary.

9. Manage and resolve grievances and conflicts arising. Motivate employees to boost their morale.

10. Work with Production Manager, Welding Technical Advisor, Engineering Manager, General Manager and HR department to develop, implement and conduct training to enhance the competency or upgrading of skills for production employees.

11. Assist the Production Manager to conduct annual performance appraisal for all reporting employees whenever necessary.

12. Work closely with the QHSE Manager/ MR to resolve quality issues.

13. Perform review on PCR and work closely with the sales, engineering and quality department or customer to clarify all technical specifications and job requirements.

14. Assist the Production Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.

15. Assist the Production Manager in initiating purchase requisition for any requirements whenever necessary.

16. Assist the Production Manager in preparing monthly reports whenever necessary.

17. Work closely with all departments to resolve any arising issues.

Requirements:

· Diploma/ Degree preferably in Manufacturing/ Mechanical/ Engineering discipline or equivalent.

· Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

· Possess good knowledge in Enterprise Resource Planning (ERP) and Manufacturing Execution System (MES).

· Strong leadership abilities.

· Excellent analytical, problem-solving and critical thinking skills.

· Good in written and verbal communication skills

· Proficiency in MS Office

Join GSK Process Technician Apprentice Programme – Singapore - 2025: Help us get ahead of disease together

GSK Apprenticeships are full-time entry level opportunities that offer ITE graduates the opportunity to begin their career while studying towards a Work-Study Diploma in Chemical Process Technology fully funded by GSK.

Prior Education requirements: Nitec in Chemical Process Technology (GPA>2.0) OR Higher NITEC in Chemical Technology OR Higher NITEC in Biotechnology, Fresh ITE graduates within 5 years of graduation or ORD.

Language requirement: Written and spoken fluency in English

Other requirements:

• If offered a position the candidate must be willing to enroll, and meet entry requirements, with the partnering educational institution, in the preferred related instruction course
• Must be able to commute daily to the GSK manufacturing facility and to the education institution when required for classes

Start date: January 2025

Application deadline: We recommend you apply as soon as possible. We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

Are you looking to gain a head start in your career where you can help positively impact the health of billions of people? Apply for the Process Technician Apprentice Programme today!

We are looking for highly motivated ITE graduates with an interest in science and engineering who are looking to kickstart their career in the pharmaceutical industry. The apprenticeship programme allows you to develop hands-on technical skills while continuing your education.

Working at our pharmaceutical manufacturing site, you will help to ensure we have the latest, safe, efficient, and reliable processes and equipment to deliver life-saving medicines and vaccines to people in 90 % of the world’s countries. This role will enable you to develop your skills in an industry that’s making radical changes to the way it develops and manufactures products.

Ahead together with tailored training and career development

This entry-level development opportunity offers you the chance to study towards nationally recognized qualifications while gaining hands-on, paid on-the-job training. Our apprentices will take up studies towards a Work-Study Diploma in Chemical Process Technology while working at a GSK Pharmaceutical Manufacturing facility in Singapore.

You will spend time working in our manufacturing facility learning how to operate and maintain the different equipment and utility systems that support our pharmaceutical production from our in-house industry experts . You will learn safety and risk management to ensure all equipment is operated safely and efficiently.  Over the 30 months of the apprenticeship, you will have a personal training programme to help you develop and progress.

What will you do?

As a process technician apprentice, you may get involved in the following activities:

• Learning how to operate equipment in the manufacture and packaging of our pharmaceutical products
• Supporting the operation of solvent recovery and effluent treatment processes that support manufacturing processes
• Supporting routine preventive maintenance activities
• Get involved in project activities
• First touch engineering - root cause analysis and solving breakdowns
• Data collection, analysis and trending to identify improvement opportunities and implementation of change
• Assisting in new product and equipment introductions
• Ensuring quality, safety and accuracy in all that we do

What do we offer you?

• A competitive salary
• An annual bonus based on company performance
• Access to healthcare and well-being programs
• Employee recognition programmes, which reward exceptional achievements
• On-the-job experience and formal and informal training and development, delivered through a mixture of coaching, mentoring and formal training programmes
• Fully funded next level education!

Apply now: https://jobs.gsk.com/en-gb/jobs/402355?lang=en-us&previousLocale=en-GB

We want GSK to be a workplace where everyone can feel a sense of belonging and thrive as set out in our Equal and Inclusive Treatment of Employees policy. We’re committed to being more proactive at all levels so that our workforce reflects the communities we work and hire in, and our GSK leadership reflects our GSK workforce.

Need help with your application?

Please email us at [email protected] and let us know how we can help you.

#ApprenticeSG

#ManufacturingApprenticeSG

Job Description:

• Drive PGCS Quality programs and policies compliance across site, by partnership with functional stakeholders.
• Key contributor/promoter to the advancement of Quality function across the sites; creating and driving critical/key business objectives in line with supporting/partnering with Operations, Supply Chain functions etc.
• Lead incident management and resolution and champion customer quality across Singapore. Site lead for Quality and Food safety crisis mgmt.
• Lead the implementation of the Singapore Quality Strategy including communication, project management and roll out activities.
• Lead continuous improvement culture/productivity initiatives to support site BPI process, demonstrating best practices to implement all quality improvements
• Drive, support and champion KPIs, key Quality metrics, etc.
• Act as a business partner to other functions whilst championing Quality, to ensure an extended and consistent quality focus.
• Be a key member of the Site Leadership team and value add in driving functional and site agenda.
• Support and provide strategic guidance around NPIs, validation, Total Quality System, Compliance, Capital investment, etc.
• Partnership with other functions ensuring change control risk assessment and validation in place for Network capacity projects and other key projects and significant changes.
• Financial Management; Budgetary and AOP responsibilities/input.
• Compliance; drive partnership with other functions through the Quality team to achieve key business goals for the control environment. Compliance with all regulations and 3rd party auditing requirements.
• Provide strategic quality leadership to the extended Quality Team
• Organisation design & sustainability of a highly effective team with appropriate succession plan. Encourage, manage & promote people-related activities/processes, partnering with HR
• Develop capability, personal growth and career development for direct reports, support these activities with DRs’ associated teams.
• Play in instrumental role in developing the overall team capability, supporting and aligning with overall plant culture.
• Ensure the smooth transition of new products to the Singapore facilities.
• Manage the complexity of additional materials, packaging and concentrate components from a quality perspective as portfolio expands
• Support and implement PGCSSC global quality initiatives
• Systems improvements (including IT systems) in terms of Processing, GMP, Product Safety, Disposition and Traceability.
• A requirement of the role is that you must adhere to all PepsiCo Health & Safety requirements.

Qualifications :

• Bachelor’s Degree in Science, Food Technology, Chemistry or any other related discipline
• Minimum 7 years of relevant experience as a supervisor in operating Laboratory environment, manufacturing concern/MNC
• Ability to manage senior stakeholders and leadership team members
• Experience in People Management and prior supervisory skill
• Possess knowledge of and experience in GLP, HPLC / GC operation, SAP QM module and LIMS management
• Strong leadership presence, ability to manage and co-ordinate with cross-functional teams on investigation analysis, troubleshooting and issues resolution
• Knowledge of food safety quality standards such as HACCP and FSSC 22000
• Ability to lead change and drive behaviours
• Ability to organize and manage multiple priorities in high-pressure work environment
• Strong collaboration and influencing skills
• Excellent communication and interpersonal skills, both verbal and written with ability to clearly articulate ideas and proposals to all levels of the organization
• Positive and Can-do Attitude
• Willing to stretch and take additional responsibilities when needed
• Lead by example to others

Kindly note that this is a short-term role based in Singapore.

• Monitor the quality of extrusion fabrication outputs and safety of extrusion operations
• Trains and reinforces employees on machine operation, safety and company policies
• Inspect fabrication outputs to check for inconsistencies and deviations from established quality standards
• Maintains fabrication workflow, processes and types of machinery
• Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines
• Ensures that production is being accomplished as per production schedule and specifications
• Monitor team and work procedures to meet production schedules
• Provide direction for project tasks and hold all team members accountable for safety, quality and production
• Conduct daily briefing with the crew to review production goals and performance feedback

Qualifications and Requirements:

• Minimum of 3 years experience as a production engineer in a construction or manufacturing environment
• In-depth knowledge of extrusion procedures, equipment, and WSH guidelines
• Able to read and interpret construction blueprints and shop drawings.
• Problem-solving abilities
• Able to use a variety of material handling and fabrication equipment.

Responsibilities:

• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas.
• Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals/drawing for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements:

• Minimum diploma in Manufacturing / Electrical /Mechanical / Engineering discipline.
• Minimum 5 years working experience in manufacturing environment.
• Willing to work after working hour or during non-working days.
• Able to work under pressure.
• Computer literate. Autocad is an advantage
• Knowledge in ISO is an advantage.
• Able to start on short notice / immediate.

Responsibilities:

• Perform assembly builds
• Ensure assembly builds are completed as scheduled and according to required specifications, drawings and work instruction.
• Work with engineers to conduct experiments
• Report manufacturing problems and assist in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.
• Other ad-hoc duties

Requirements:

• Min NITEC/ Higher Nitec or Diploma in Engineering or its equivalent
• Able to comprehend schematic / mechanical drawing
• Able to commit rotating shifts

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Xie Jiani (R1548854)

EnviroDynamics Solutions Pte Ltd

EA License No.: 12C6285

Purpose:

GSK Tuas are looking for an Engineer who can join the project and commissioning phase of our new facility. The candidate will join at an exciting time for the site and will bring expert knowledge across some of the below Utilities and/or HVAC disciplines. After the project the candidate would remain responsible for some systems listed below.

The Project phase will require close work with the design and construction team and technicians to:

• Review and familiarization on Process equipment's (PID's, lay outs and block diagrams).
• Execute and review SAT/FAT/IQ/OQ/PQ protocols/reports
• Review of documentation (SOP's, WRA, Risk Assessments)
• Review and generation of maintenance plans

Following the project, the candidate will remain accountable for the designated system and would be accountable for:

• Safety: Ensure all maintenance activities are carried out safely. Maintain awareness in SEHS within Technical Services and strive for improvements.
• Quality: Ensure that all Engineering and maintenance activities are carried out in compliance with Engineering Standards and Procedures. Lead key Quality improvement projects. Assist and lead investigations and CAPA
• Reliability: Assure reliability of plant equipment and systems by managing team to implement conditioning monitoring and methods, conduct equipment measurement and improvement on repeating failure; evaluate/analyze data/results, provide recommendation and follow up monitoring
• Continuous improvement: Drive continuous improvement by providing recommendation and initiative to promote sustainability.

Responsibilities:

The systems listed below are currently in use on site. Candidates who can bring knowledge and experience across a selection of the following systems should apply:

Clean utility system:

• Purified Water Generation
• Purified Water Storage and Distribution
• Water-for-Injection Generation
• Water-for-Injection Storage and Distribution
• Pure Steam Generation and Distribution
• Technical Gases and chemical distribution
• HVAC and Cleanroom systems

Black utility system:

• Cooling Tower
• Steam Boiler
• MVAC Boiler
• Glycol Chillers
• Air Compressors
• Air Dryer
• Liquid Nitrogen Package
• Trigeneration

Knowledge, Skills & Experience :

• Min 4 years of engineering experience with degree in engineering or min 6 years of engineering experience with diploma in engineering
• Min 2 years of technical experience in Bio/Pharma industry with degree or min 3 years of technical experience in Bio/Pharma industry with diploma
• Experience in GMP and safety practices
• Highly knowledgeable and competent in their field of work.
• Strong technical knowledge and well verse in all technical aspects.
• Substantial fault-finding and trouble-shooting experience.
• Strong leadership in team management.
• Good analytical skill in investigation.
• Lead complex issues investigation and detailed troubleshooting.
• Good interpersonal skills.
• Good oral and communication skills.
• Customer focus and result oriented.
• Good people management and coaching skills.
• Good teamwork.
• A strong leader and think out of the box.
• Excellent regulatory knowledge.
• Integrity and Innovative.
• Problem solving skill.
• Analytical thinking skill.
• Facilitation and organization skill.
• Good time management.

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

Key Roles and Responsibilities

• Be the owner of Product Quality and work closely with Materials Engineers, Customer Quality Engineers, and Quality Systems Engineers to enable CMC Materials to supply Worry-Free products to our customers.
• Lead the team to update and maintain manufacturing documentation (SOP, work instruction, batch card, FMEA, Control Plan, RFC, P&ID) to ensure their accuracy and efficiency. Review documents regularly to ensure their compliance with Safety, Quality and other regulatory requirements.
• Own the Management of Change process for any manufacturing process and equipment changes in the plant.
• Own the root cause investigation for any production, quality and customer issues related to the manufacturing process or equipment. Support Materials Engineering team in root cause finding for issues related to raw materials.
• Develop Preventative Maintenance schedule for all existing process equipment and support Maintenance Team to timely execute the PM program.
• Identify and lead continuous improvement opportunities with a data-based approach, balancing the needs of safety, quality, cost, reliability, and capacity.
• Develop a robust SQC/SPC program balancing process capability and customer requirements. Update process parameter control limits at defined intervals and own the trend reviews to ensure all processes are in control.
• Work with Control System Engineers, lab, and Materials Engineers to ensure data accuracy and availability. Drive a culture of data-based decision making.
• Develop transfer functions between customer performance requirements and internal manufacturing key characteristics. Develop/implement control strategies to ensure consistent performance at customers’ locations.
• Work closely with operation associates, shift supervisors, and operation managers to train and encourage production staff to follow procedures and understand the impact of their actions.
• Optimize production process in terms of defining sampling points & frequency, choosing helpful in-process test protocols, and working closely with the control systems team to define all control schemes.
• Drive Best-Practice sharing/transfer among global manufacturing sites.
• Support all corporate EH&S and Quality initiatives.
• Support capital projects where vital to implement new products or processes

Performs other duties as assigned.

Qualifications and Experience

• B.S. in Chemical Engineering is required. MS or higher in Chemical Engineering is a plus
• 2+ years of experience in a chemical processing environment is required. In-depth knowledge with chemical engineering unit operations: mixing, sophisticated filtration, material handling and distillation is helpful.
• Experience with PSM is a plus.
• Experience with AutoCAD or SAP is a plus.

Skills and Abilities / Core Competencies

• Strong problem-solving and statistical data analysis skills are required.
• Ability to multi-task and attention to detail are must-haves.
• Strong verbal and written communication skills within the company and to customers are required.
• Computer Skills – Proficient with Microsoft applications and statistical software such as JMP, Minitab or SAS.

Candidates with more than 2+ years of experience may be considered for Production Engineer Position.

JOB SUMMARY

Duties include generating PCR and engineering drawing and exploring alternate solution to solve resource or production constrain. He is also responsible to plan, organize and manage assigned project activities. This requires direct interaction with customer, vendors and functional departments to monitor and ascertaining all jobs are progressing within schedule and meeting deadline.

RESPONSIBILITIES & DUTIES

• Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production Supervisor to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Familiar with various laser systems as well as advance welding/cladding technique.
• Experience in robot programming for welding/laser cladding.
• Perform other assignment and duties as and when required.

ACCOUNTABILITIES

• Ensure on time issuance of PCR and drawings and correctness.
• Ensure all projects are on schedule and completed on time.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.

QUALIFICATION & EXPERIENCE

• Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.
• Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

Job Info:

• Salary: Basic up to $3000 + AWS + VB
• Working Hours: Monday - Friday (8am - 5pm)
• Location: North (Woodlands)

Job Scope:

• Prepare shipping documentation
• Coordinate with internal customer service and warehouse to ensure on-time delivery to customer
• Liaise with the forwarder for shipment booking and collection
• Handle parts
• Others ad-hoc duties as assigned

Requirements:

• Experienced in-house shipper experience in a manufacturing company is preferred

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Key Responsibilities:

1. Production Scheduling: Assist in creating, managing, and maintaining the production schedule, ensuring all timelines are met.
2. Communication: Act as a liaison between production teams, departments, vendors, and clients to ensure smooth coordination.
3. Logistics Management: Handle logistics related to materials, equipment, and resources needed for production.
4. Document Management: Maintain records, production reports, and ensure compliance with all paperwork.
5. Vendor Coordination: Work with suppliers to ensure timely delivery of materials and equipment.
6. Quality Control: Assist in monitoring production to ensure quality standards are met and flagging any issues.
7. Budget Tracking: Track production expenses and ensure alignment with the allocated budget.
8. Team Support: Assist the production team with day-to-day tasks, troubleshooting, and resolving any issues that arise during production.
9. Compliance & Safety: Ensure that production practices adhere to safety and regulatory standards.

Skills & Qualifications:

1. Educational Background: Siploma's degree in Production Management, Business, or a related field.
2. Experience: 2-3 years of experience in a similar role, preferably in a fast-paced production environment.
3. Communication Skills: Excellent written and verbal communication skills.
4. Organizational Skills: Strong organizational and multitasking abilities to manage multiple aspects of production simultaneously.
5. Problem-Solving: Ability to quickly resolve issues that arise during production.
6. Attention to Detail: Keen attention to detail, ensuring accuracy in schedules, budgets, and reports.
7. Technical Proficiency: Familiarity with production software, project management tools, and Microsoft Office Suite.
8. Teamwork: Ability to work well in a team and coordinate with different departments effectively.
9. Time Management: Excellent time management skills to meet deadlines and manage production schedules.
10. Adaptability: Ability to work in a dynamic environment with shifting priorities.

Preferred:

• Experience in the specific industry your company operates in.
• Knowledge of production processes, equipment, and materials handling.

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous

HOW MIGHT YOU DEFY IMAGINATION?

Amgen is one of the world’s leading independent biotechnology companies. For over 4 decades, Amgen has pioneered biotechnology breakthroughs, to bring state-of-the-art medicines from laboratory to the patient. Amgen has not only discovered and developed innovative human therapeutics, but has invested in cutting edge manufacturing capability and support services to deliver these exciting therapies to medical teams around the world. Japan and Asia Pacific (JAPAC) is the fastest growing region in Amgen. Now we are hiring an Snr/Occupational Health Nurse in Amgen Singapore Manufacturing.

Live

What you will do

Amgen discovers, develops and delivers innovative human therapeutics. A biotechnology pioneer since 1980, Amgen was one of the first companies to realize the new science’s promise by bringing safe, effective medicines from lab, to manufacturing plant, to patient. Amgen therapeutics has changed the practice of medicine, helping millions of people around the world in the fight against cancer, kidney disease, rheumatoid arthritis, and other serious illnesses. With a deep and broad pipeline of potential new medicines, Amgen remains committed to advancing science to dramatically improve people’s lives.

As the Snr/Occupational Health Nurse you will be responsible to lead the Occupational Health (OH) Program for Amgen Singapore, which includes key aspects of both care management of employees and strategic OH planning.

As an integral part of EHSS team and being part of Amgen OH network, this role reports to EHSS Director and dotted line to Global OH Lead/designate. As Amgen Singapore adopts a Total Workplace Safety and Health approach, this role is essential in building a holistic and integrated approach to manage the interactions between work, safety and health to promote the well-being of both employees and Amgen Singapore.

Other scopes include injury/illness care, medical surveillance exams & testing, wellness screening, fitness center oversight, compliance tracking & record keeping, travel health consultation, emergency response and disaster preparedness.

Responsibilities:

• Manage OH programs for Amgen to optimize health care and return to work, assess health risks and ensure health-based programs are developed, documented, and implemented in accordance with both Singapore regulatory and Amgen’s requirements.
• Lead the operational activities for OH facilities – first aid room, nursing room and provide resources and physical health clearance to fitness facilities’ accesses.
• Render emergency medical care for employees, for example first aid treatment. Lead the First Aid Program for the site and ensure the readiness of first aiders in emergency response situations.
• Follow up with designated workplace doctor (DWD) on occupational related incidents and update the Amgen Incident Database. Instrumental in ensuring that work related incidents are properly managed, timely communicated and followed-up.
• Set up, manage and/or monitor medical/health contracts and service level agreements with external DWD, to ensure it is in line with company procurement standards, and continuously improve case management protocols.
• Manage site OH medical records in accordance to local regulatory requirements and Amgen record retention policy, including first aid records, equipment maintenance/ calibration records etc.
• Monitor and manage employees on routine medical surveillance program. Lead the site in pre-employment and regular medical assessment activities.
• Render OH SME support and advice in site’s Wellness program for Amgen Singapore in accordance to Amgen Corporate and Singapore HPB program. Partner with site Wellbeing Lead for a holistic Total Workplace Safety and Health solution in Amgen Singapore. Some examples include leading the general/targeted/interventional health screening or management, as well as healthy food programs.
• Oversee the site’s Return-to-Work program, as well as work accommodation plans.
• Partner closely with key stakeholders such as Human Resources department in the management of related OH programs for employees.
• Support employees with traveling health requirements (e.g. travel kits, vaccinations etc.) as part of Travel Health Program management.

All listed tasks and responsibilities are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Win

What we expect of you

Required Qualifications

• Bachelor’s degree in nursing or relevant qualification with practicing certificate and 4 years of directly related experience OR
• Diploma in nursing or relevant qualification with practicing certificate and 8 years of directly related experience
• Nursing Administration/ Management/ Advance Leadership Diploma is highly desirable

Preferred Qualifications

• Relevant industrial experience specifically in manufacturing industry, with minimum 3-5 years’ experience in Occupational Health.
• Demonstrated proficiency of written and verbal communication skills (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Your selection for this role will be subject to fulfilling the medical requirements of this job scope. If so, you will be informed of the medical check(s) that you may need to undergo. All medical related expenses incurred from this medical check shall be borne by the company.

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.

Key Responsibilities

• Prioritize and execute training and deploy tools, principles and processes that eliminates waste using six sigma or lean approach
• Work closely with the relevant departments such as QA and Procurement to implement manufacturing improvement programs and resolve problems
• To control and manage production processes and ensure that the schedule is met
• To inculcate a quality mindset among assembly staff to meet or exceed customers’ expectations of quality in assembled products
• Identify training requirements to build a flexible workforce and strengthen production capability
• Carry out duties in accordance to with Quality policy, ISO standards, EHS control procedures and WIS

Job Requirements

• Minimum Diploma/Degree in Mechanical Engineering, or a related field
• At least 3 years of relevant working experience in manufacturing/production with supervisory role
• Experience in precision manufacturing industry is a plus
• Good knowledge of SAP system
• Proficient in MS Office
• Good knowledge of CNC machine operations
• Organizational and leadership abilities
• Ability to work under pressure and meet deadlines.
• Experienced in leading a team and able to work under stress

Job Description

► Monday to Friday

► Office Location - East Area

► Basic up to $5000 + VB

Job Responsibilities

• Responsible for piloting new product set-up and launch which includes RFQ, outlining product structure and part number creating
• Raise, oversee and maintain all engineering documents
• Support customer and product team on technical issues
• Monitoring of manufacturing process

Job Requirements

• Diploma in Electronics Engineering
• At least 3 years of working experience in NPI / Product Engineering
• Experience working with Semicon Machines / Equipments

For consideration, kindly submit your CV by clicking “APPLY NOW”

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R1326597 | Oh Jia Qi Doreen