Selected Candidates to carry out, or supervise, inspections, maintenance, testing and checks according to the rules and procedures in order to release the aircraft to service.

Key Responsibilities

• Inspections

To carry out or supervise technical handling of an aircraft, within the scheduled ground time, according current carriers instructions

Activities:

1. Performs the checklist according to the aircraft type and carriers instructions
2. Inspects the performed duties
3. Signs the required logbook ( e.g. AML/CML + BOW) for maintenance release

• Analying defects and complaints

Activities:

1. Checks pre-arrival information on aircraft status, from crew and/or Maintenance Control Center
2. Contact flight crew directly after arrival for debriefing
3. Checks logbooks for open items
4. Analyses defects and complaints (trouble shooting)
5. Decides if defects and complaints can be deferred or rectified immediately
6. Informs and consults home base and Maintenance Manager or duty Engineer/Service Manager/Operations/Crew upon actions to be taken

• Repair, technical handling and modifications

To carry out or supervise maintenance and repairs of the aircraft

Activities:

1. Ensures availability of work instructions (checklist)
2. Ensures correct and adequate stock control (spare parts and materials) and maintenance of ground equipment (if applicable), in accordance with company procedures
3. Plans and organises the repair process and deploys Mechanics
4. Performs or supervises repairs and technical handling
5. Communicates with home base and Service Manager/Operations/Crew about the progress of the repair or the modification process.
6. Inspects the repairs and modifications
7. Perform flight duties or relief duties to other station when required

• Administration

Activities:

1. Performs all administration related to the technical handling of the carrier, according to instructions by the carrier
2. Updates Station Information File
3. Carry out station related tasks assigned by Maintenance Manager.

• Supervision of Mechanics

Activities:

1. Checks if duties are performed under safe conditions
2. Trains Mechanics

• Knowledge and Experience

1. Is holding of EASA B1 or B1/2 AML
2. Is certifying staff according to EASA 66 Cat. B1 or B1/2
3. Possess either or multiple ratings of A320,A330,A350,B777,B744,B787
4. Preferably has at least 2 years of experience as a certifying engineer
5. Reads, writes and speaks English
6. Has sufficient knowledge about specific operator- and type- procedures including customer demands
7. Has the proven ability to quickly and accurately identify more complex issues and problems that require thorough analysis
8. Is able to envisage the broader consequences of various decisions
9. Is able to arrive at a sound judgement in the face of conflicting facts and ambiguous information

• Behavioural Competencies

1. Concern for Excellence
2. Customer Service Orientation
3. Drive
4. Integrity
5. Judgement
6. Self Confidence

Roles & Responsibilities:

• Assist on daily duties of employees to ensure that quality standards are being met and proper procedures are being followed
• Provide guidance to employees in handling errors, problems, complaints and/or disputes
• Manage cycle counting program according to SLA
• Investigate stock discrepancies and feed causes for stock discrepancies through to the operation
• Investigate internal excess & short picks and feed causes through to the operation
• Report on any stock adjustments; including the reasons for these adjustments
• Ensure KPI is met and prompt submission of reports to Supervisor/ Manager
• Interpret and explain work procedures and policies to staff
• Prepare and manage reports, manuals, and other documents using a WMS or SAP
• Initiate and maintain orderly records in compliance with company regulations
• Ensure adherence to legal and company policies and procedures and undertake disciplinary actions if the need arises
• Perform ad-hoc tasks as assigned by Manager in support of operations when necessary

To be successful in this role you will require the following:

• Knowledge and working experience of supervisory principles and practices.
• Should also possess excellent computer skills, analytical skills, presentation skills, and good people skills.
• Strong problem-solving ability teamed with the ability to delegate work.
• Capacity to manage and maintain an effective team environment.
• Able to follow, perform and maintain a good and positive performance in both housekeeping and safety related task assign by the management.
• Consistently demonstrate, implement and maintain an excellent service quality at all levels of the organization.
• Capacity to manage and maintain an effective team environment
• Able to follow, perform and maintain a good and positive performance in both housekeeping and safety related task assign by the management

The Project Engineer is responsible for ensuring proper adoption of resource, quality and risk standards as well as managing project profit during the project lifecycle. He/She coordinates all administrative processes related to a project eg reports, claims, payment of invoices, including the final project handover documentation. He/She typically comes from an engineering industry/background and is able to identify and report project-related issues as well as suggests changes related to quality, risk and administrative processes.

He/She has good communication, customer management and negotiation skills for engaging with both internal and external parties to coordinate project activities between organisational departments and teams during the various phases of a project, as well as managing sub-contractors to ensure they are integrated into the project and adhering to technical requirements.

JOB DESCRIPTION

• Be responsible for the planning, scheduling, controlling and coordinating of building services related works in terms of preventive / breakdown / A&A Works
• To lead a team of supervisors & skilled workers to carry out their works accurately and timely and to ensure that works on site are carried out according to client requirement
• Liaise and hold meetings with clients, Managing Agent & Sub contractor to ensure that all requirements by clients and relevant authorities are adhered
• Monitor, track, and provide timely project progress reports to the management

JOB REQUIREMENTS

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic), project & facilities management, building services engineering, mechanical engineering or equivalent or equivalent.
• Diploma holders with relevant facilities management, M&E experience are also welcome to apply
• Good knowledge of M&E coordination
• Electrical and ACMV design capability would be an added advantage
• Committed, positive attitude & able to handle projects independently
• Good team player with ability to lead and multi-task
• At least 2 Year(s) of working experience in the related field is required for this position

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Duties of a Licensed Aircraft Engineer

• Day to day routine maintenance & rectification of aircraft defects
• Ensuring all work is carried out in accordance with approved maintenance data, company, authority and customers’ requirements
• Performing aircraft release to service certification (CRS) for maintenance and repair of aircraft according to the Company authorization issued by Quality Department
• Assisting in the forecasting of manpower, spares & equipment needs
• Ensuring that all staff under his control observes safety precautions, reporting of unsafe working condition & operation
• Assisting in the investigation of incident/accident reports and ensuring corrective actions are implemented
• Ensuring that tools & equipment under his control are properly maintained, calibrated and correctly used for the jobs
• Ensuring action is taken at all times to maintain the aircraft on schedule
• General supervision, control & discipline of staff under his charge
• Performing other duties, as and when required

Job Requirement

• Posseses relevant Licences from the Aviation Authority, with at least 5 years of relevant working experience
• Good communications and interpersonal skills
• Meticulous and organized
• Candidate with ICAO Annex I is welcome to apply

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Duties of a Licensed Aircraft Engineer

• Day to day routine maintenance & rectification of aircraft defects
• Ensuring all work is carried out in accordance with approved maintenance data, company, authority and customers’ requirements
• Performing aircraft release to service certification (CRS) for maintenance and repair of aircraft according to the Company authorization issued by Quality Department
• Assisting in the forecasting of manpower, spares & equipment needs
• Ensuring that all staff under his control observes safety precautions, reporting of unsafe working condition & operation
• Assisting in the investigation of incident/accident reports and ensuring corrective actions are implemented
• Ensuring that tools & equipment under his control are properly maintained, calibrated and correctly used for the jobs
• Ensuring action is taken at all times to maintain the aircraft on schedule
• General supervision, control & discipline of staff under his charge
• Performing other duties, as and when required

Job Requirement

• Posseses relevant Licences from the Aviation Authority, with at least 3 years of relevant working experience
• Good communications and interpersonal skills
• Meticulous and organized
• Candidate with ICAO Annex I is welcome to apply

WELCOME TO SITA

SITA is the leading specialist in air transport communications and information technology. We don’t just connect the global aviation industry, we apply decades of experience and expertise to address almost every core business, operational, baggage, and passenger process in air transport. As an organization, we cover 95% of all international air travel destinations and work with over 2,800 air transport and government customers in every corner of the globe. Immerse yourself in the dynamic world of technology while embracing our collaborative, and inclusive culture.

Ready to redefine air travel? The journey starts here, with you at SITA.

ABOUT THE ROLE & TEAM:

WHAT YOU WILL DO:

• Provide Service Operations support to internal and external customers in accordance with the terms of the customer contract and Service Level Agreements (SLAs)
• Ensure the correct functioning and maintenance of all internal and external systems and products serviced by Service Operations
• When required, act as the customer SPOC and coordinate the scheduling of intervention with Customer's, internal resolver groups, and the Service Desk ensuring the highest level of customer services and communications are maintained to resolve the fault and incident within the prescribed SLA.
• Carry out incident and problem management support to the highest standards and co-ordinate the resolution with the appropriate resolver groups
• Ensure shortest restoral times possible, initiating the timely escalations to specialized resolver groups inside and outside SITA, according to the customer contracts, SLAs and monitoring requirements
• To ensure the Service Operations team adheres to the highest working standards for all incidents and problems by providing guidance, support and direct management.
• Proactively detect problems related to service and infrastructure operations and delivery services, conduct diagnostics and provide service request ownership to ensure resolution of customer problems
• Support the senior team members in the management, reporting, and coordination of day-day tasks during the absence of the Lead Engineer
• Adhere to installation guidelines and industry best practices in order to deliver quality service and infrastructure operations
• Use the appropriate tools and equipment to perform the installation, intervention, and repairs in accordance with Service Operations and Delivery guidelines and instructions where provided
• Report and escalate to the next level those problems which cannot be fixed
• Carry out preventive and proactive maintenance of equipment and monitoring of systems and services in accordance with agreed schedules and customer expectations
• Perform Change Management, Configurations, Design and Implementation of the supported Product & Systems
• Manage local suppliers in the provision of services for the SITA Service Operations centres and report on services provided to management.
• Conducts the analysis, definition, documentation and testing of application & systems enhancements
• To provide onsite support to Users during the cutover of the services
• Continuously identify and document lessons learnt, known errors and operational knowledge for improved services
• When/where required, be contactable for escalations and support, on and on-call standby basis
• When/where required, perform assigned tasks on 12 x 7 shifts basis.

EXPERIENCE:

• Degree or equivalent Diploma / Certificate in Computer Science, Electronic Engineering or equivalent
• Minimum 8 years experience in the network, and/or application/system support domain.
• Must have dealt directly with external customers delivering to SLAs.
• Exposure to ITIL and IT/network components and principles
• Demonstrated maturity in handling complex customer issues and demanding customers
• Ability to coach new joiners and to facilitate their integration into the team
• Knowledge of Airline and CAA customers use of ACM applications
• Ability to organize the activity of a team and to take ownership of issues until resolution

· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service manufacturing equipment for the semiconductor and display industries. Our innovations are at the foundation of the technology that transforms every part of our lives. We offer an exciting place to grow and learn alongside some of the best people you’ll ever meet. Join us to Make Possible a Better Future.

The Advanced Packaging Development Center (APDC) is a state-of-the-art cleanroom that is among the most advanced wafer-level packaging labs in the world. It houses the industry’s broadest portfolio of products that enable the foundational building blocks of heterogeneous integration, including advanced bump and micro-bump, fine-line redistribution layer (RDL), TSV and hybrid bonding. APDC was established as a joint lab partnership with the Institute of Microelectronics (IME), a research institute of Singapore’s Agency for Science, Technology and Research (A*STAR).

We are currently seeking for an experienced and passionate Process Engineer (R&D) to join APDC now. Apply now if you fit the description below!

Key Responsibilities

• Work closely with Process Integration, and the CTO USA team, hands on running wafers on semiconductor equipment using MES systems to run process operations.
• Design, create recipes, collect data, analyze and compile reports on moderately difficult process engineering experiments, within safety guidelines
• Perform hardware characterization on moderately difficult systems, within safety guidelines
• Troubleshoot moderately complex problems, perform Root Cause Analysis and resolve moderately difficult process engineering issues
• Measure film properties, organize data/reports for review and interpret data
• Generate internal documentation for products, presentations and technical reports
• Interact with customers to resolve moderately difficult process engineering issues/problems under general supervision
• Identify, select and work with vendors and suppliers under general supervision
• Implement new technology, products and analytical instrumentation

Requirements

• Relevant Engineering education qualification
• Research experiences focusing in semiconductor industry
• Past experiences in dealing with MES systems is a plus
• Stakeholder management
• Good communication and interpersonal skills

Work Location

• Science Park II

The Project Engineer is responsible for ensuring proper adoption of resource, quality and risk standards as well as managing project profit during the project lifecycle. He/She coordinates all administrative processes related to a project eg reports, claims, payment of invoices, including the final project handover documentation. He/She typically comes from an engineering industry/background and is able to identify and report project-related issues as well as suggests changes related to quality, risk and administrative processes.

He/She has good communication, customer management and negotiation skills for engaging with both internal and external parties to coordinate project activities between organisational departments and teams during the various phases of a project, as well as managing sub-contractors to ensure they are integrated into the project and adhering to technical requirements.

RESPONSIBILITIES

• Be responsible for the planning, scheduling, controlling and coordinating of building services related works in terms of preventive / breakdown / A&A Works
• To lead a team of supervisors & skilled workers to carry out their works accurately and timely and to ensure that works on site are carried out according to client requirements
• Liaise and hold meetings with clients, Managing Agent & Sub contractor to ensure that all requirements by clients and relevant authorities are adhered
• Monitor, track, and provide timely project progress reports to the management
• Good knowledge and experienced in building related works such as civil engineering, structural, architectural, building repair, carpentry, partition, A&A, renovation, plumbing works etc

JOB REQUIREMENTS

• Candidate must possess at least Diploma/ Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Building Services Engineering, Project and Facilities Management or equivalent.
• Diploma holders with relevant work experience are welcome to apply
• At least 3 Year(s) of working experience in facilities/ building maintenance industry.
• Preferably Executive specialized in Engineering - Civil/Construction/Building Services or equivalent
• Class 3 driving licence (Good to have)
• Must be self-driven & motivated to perform and deliver service excellence

We are looking for project engineer (building) based in Singapore office, if you are interested in becoming part of our SH family, please submit your resume and experience via the submit button below.

Our company is in need of Mechanical Engineer cum Procurement Officer for construction industry.

Criterias are:
1. Healthy
2. In-charge of workshop vehicle maintenance and repairs
3. Warehouse duties
4. Preparation of Delivery Orders (DO), Invoices and Quotations

Working Hours:

Mon-Sat: 8am to 6pm

COMPANY DESCRIPTION

With a capacity of around 430 beds, Peacehaven provides compassionate, individualized, holistic care to all without discrimination. We offer a comprehensive gamut of services to care for the sick, frail and elderly who have physical or mental disabilities with minimal or no appropriate caregiver support at home.

Peacehaven has also been awarded the bizSAFE level 4 status which affirms our commitment to safety and health standards at the workplace.

The Salvation Army, Singapore - Peacehaven Nursing Home

RESPONSIBILITIES

• Assisting the cook in assembling and dishing out of meals during meal service
• Assisting in receiving and sorting of foodstuffs for stock rotation or storage
• Assisting in delivering food/items to Resident Living Areas (RLA)/Dining Rooms

• Able to work on weekends and on shifts
• Able to accept physical hard work such as pushing and carrying items

Working Hours

Under normal circumstances the hours of duty will be as follows:

• 6-day work-week according to roster
  • Group 1 - 7.00 am to 3.00 pm
  • Group 2 - 9.00 am to 5.00 pm
  • Group 3 - 10.30 am to 6.30 pm

Working Location

The Salvation Army, Peacehaven Nursing Home

9 Upper Changi Road North Singapore 507706

About the role

• Two-year contract
• Reports to Instrumentation Engineer and Senior Instrumentation Engineer;
• Maintain and implement ISO 9001, ISO 14001 & OHSAS 18001/ISO 45001 Management System effectively;
• Follow Instrumentation Engineer’s arrangement in conduct field monitoring tasks;
• Able to complete given task within permitted working hours;
• Maintain and protect the monitoring equipment diligently;
• Follow Instrumentation Engineer’s instruction in carry out adhoc work such as help out in digging manual trialpit, instruments installation.
• Implementation of the highest practicable standards of Health, Safety and Environmental Performance and maintenance of the Management Systems to ensure compliance with appropriate International Standards;
• Follow business management system and corporate compliance procedure;

About you

• Degree in Civil Engineering
• Fresh graduates are welcome
• Able to withstand long hours outdoors
• Ability to exercise job prioritization
• Team player
• Effective communication skills
• Results driven and highly motivated
• Able to deliver under pressure

What we offer

• Competitive salary with Annual Wage Supplement
• Generous paid-leave
• Career & training opportunities (international opportunities possible)
• Company shuttle from various pick-up at MRT stations across Singapore
• Collective health insurance and outpatient benefits;
• Employee Assistance Programme (EAP) to provide help when you need extra support.
• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Key Job Responsibilities

1. Liaise with freight forwarders, transport teams, and carriers to schedule timely deliveries and shipments.
2. Collaborate with the Acceptance and Cargo Releasing teams to ensure smooth cargo movement.
3. Maintain accurate records of cargo movements, ensuring data is updated in the warehouse management system.
4. Address inquiries from customers or internal teams regarding shipment statuses and delays.
5. Provide timely updates on cargo readiness and dispatch schedules.
6. Ensure all warehouse staff adhere to safety protocols and operational guidelines.
7. Monitor and report any incidents, damages, or irregularities during operations.
8. Oversee and guide warehouse staff during export operations to meet deadlines and standards.

Requirements

• Minimum 2 years of experience working in a warehouse setting or in logistics; experience in operating Management
• Strategic thinking ability, proven implementation results
• Experience in customer service with good communication & interpersonal skills
• Willingness to work flexible hours, including overtime and weekends

Additional Information

• Competitive hourly wage with shift allowance.
• Working Location: Alps Ave
• 5.5 working days

How to Apply:

Please submit your resume and cover letter outlining your relevant experience and qualifications to 97815157，

In your cover letter, please indicate your availability for afternoon shifts and any relevant warehouse experience. We look forward to reviewing your application.

Key Responsibilities

Ensure that the correct quantity and meal types are sent to the Food Bank on time and that meals are stored accurately

• Collect, check and hand over meals and catering items to crew and monitor last minute top up of meals
• Conduct quality control checks on completed equipment carts and ensure that equipment are present according to the correct Equipment Loading Plan
• Push meal carts and carry catering equipment in the kitchen and on-board aircraft
• Handle and transport meal orders between the kitchen and the aircraft

Requirements

• Possess basic frontline customer service skills
• Ability to work in a multi-cultural team
• Able to carry heavy loads up to 5kg
• Ability to read and speak English
• Ability to do simple mathematical calculations
• Work 3 rotating shifts

Job Description

Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service manufacturing equipment for the semiconductor and display industries. Our innovations are at the foundation of the technology that transforms every part of our lives. We offer an exciting place to grow and learn alongside some of the best people you’ll ever meet. Join us to Make Possible a Better Future.

We are currently seeking for an experienced and passionate Process Engineer (R&D) to join our Applied Materials - NUS Advanced Materials Corporate Lab. The Advanced Materials Corporate Lab combines Applied's leading expertise in materials engineering and semiconductor technologies with NUS' world-class and multi-disciplinary R&D capabilities that span across applied chemistry, materials science and microelectronics process engineering. Apply now if you fit the description below!

​Key Responsibilities

• Devise precursor and deposition strategies and associated intellectual property. Design chemical processes to find new innovative ways to create, remove or clean thin films.
• Prepare the project plan for semiconductor films growth and execute project deliverables from planning to implementation. Be responsible for project milestones and deliverables within project cost.
• Engage with business unit teams and customers to initiate and complete projects. Own the technical development aspects in the pursuit of the project goals.
• Trouble shoot for root causes to project developments obstacles and engage business unit and broader team members implementing proposed solutions to the problems.
• Prioritize the activities to achieve on-time and within budget performance objectives for the project.

Requirements

• PhD in Chemistry, Chemical Engineering and Materials Science
• Have good working experience in ALD, CVD, MOCVD, PECVD film depositions
• Have working experience with novel thin film growth and characterizations
• Have good understanding of vacuum science and general process and hardware trouble shooting of ALD/CVD platforms
• Have basic working knowledge of chemistry and chemical reactions at interfaces

Work Location

• Applied Materials - NUS Advanced Materials Corporate Lab @E6

Job Purpose

· Responsible for servicing laundry customers,

· Monitoring daily laundry operations to ensure hospitals have enough linen turnaround & linen quality fulfill hospital requirements

Supervise and train inmates on Tailor operations

Major Duties and Responsibilities

· Actively support laundry operations in meeting hospitals’ linen requirements like quality.

· Handle hospitals’ requirements and feedback.

· Basic knowledge of sewing and mending is a added advantage but not a requirement.

· Ensure a smooth daily Tailor operation by maximizing capacity to achieve daily target.

· Liaise with other laundry officers to ensure hospitals’ requirements are met.

· Work closely with Prisons to resolve issues faced by Tailor workshop.

· Supervise inmates’ daily works and ensure linen quality meet hospital’s requirements. Training inmates on laundry operation and build-up their confidence on job.

· To instil the right value attitude and mind set to inmate in order to change their habit, behaviour and change their life other than just train them on the technical skills.

· To ensure Workplace Safety & Health regulations are adhered to.

· To maximize production capacity, productivity and quality.

Any Other Duties

· Any other tasks or duties assigned by Senior Manager, Operations (Changi)

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

OPERATION MANAGER (AIR FREIGHT)

Responsibilities:

• Oversee the daily operations of export & import of airfreight shipments.
• Collaborate with various departments within the airfreight division to optimize procedures and minimize inefficiencies.
• Lead the implementation of new business initiatives. Comprehend customer needs and spearhead business implementation efforts.
• Foster a culture of continuous improvement and collaborate with stakeholders to ensure employees receive the necessary training to perform their tasks and achieve excellence.
• Conduct annual performance reviews for the airfreight department
• Maintain records of team training activities for airfreight team

Requirements:

• Min GCE “O” Level
• Min 5 years of airfreight experience
• Strong communication and interpersonal skills required.

RELEVANT AIR FREIGHT INDUSTRY EXPERIENCE

ABLE TO EXECUTE AWB

DECLARE EXPORT PERMIT

EMAIL BOOKING WITH AIRLINES AND CUSTOMERS

CO-ORDINATE WITH TRAFFIC TEAM FOR TIMELY DELIVERY/PICK-UP

PREPARE INVOICES

UPDATING UPLIFTING STATUS & POD

AT LEAST WITH 5 YEARS OF EXPERIENCE

AT LEAST O LEVEL AND ABOVE

· Responsible in providing day-to-day engineering support to manufacturing operations to achieve key business objectives involving quality and productivity.

· Provide support for engineering conception phase all the way to implementation and operations support.

· Work closely with cross functional teams to provide innovative engineering solutions for continue process improvements.

· Active involvement in projects relating to design and implementation of manufacturing-related equipment, such as automated optical inspection units.

· Assist in developing, updating and revising manufacturing documentation in accordance with company policies, relevant standards, and regulations established by regulated agencies (e.g. ISO9001/14001/13485).

· Assist in initiating, evaluating and implementing engineering change order.

· Assist in anyalzing and determining conformance of materials and parts manufactured.

· Assist in monitoring and improving productivity metrics established as company’s goal.

· Participate in development and validation activities for R&D products.

Knowledge in Delta PLC programming and COBOT.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

As Industrial Operations Manager of the Regional Company:

The job holder will be in charge to organize the full process of the Partnership Memo (PM):

• Maintain a data base of all the status of all the documents related to the PM
• Cross information (from sales forecast, Go To Market, Gates, communication with stakes holder) to ensure all necessary PM are asked for and received
• Obtain the signature from all stakeholders and distribute the signed copies
• Get the relevant Statement of Work (SoW), detailed KIP Price and responsibility matrix in RACI format (when possible and relevant)
  

In the KIP process, in coordination with IOD, CDs, KIP managers the position will be in charge of:

• Liaise with the OU to maintain a data base on the date of coming into force of the main contract, of the KIP contract, of the significant variation of the KIP contract, of the end of the KIP contract and of the end of the main contract
• To organize yearly with the KIP manager the evaluation survey with the exporting units having a contract with a KIP, to collect the feedback of these OU on the performances of the partner
• To obtain a KIP evaluation report from the OU at the renewal of a KIP qualification and at the end of a contract.
• To monitor the implementation of any action plan linked to a Risk Factor
• To monitor and if required to implement with the KIP any maturity or improvement plan decided by the IOD and KIP Managers during the qualification phase or as a consequence of the yearly feedback from OU.
  

In bid phase, the position will :

• Support the bid team (from OU or the Country of destination) in the specification of the SoW and in the negotiation with the Key Industrial Partners (KIP).
• Participate to the evaluation of the best contractual scheme with the KIP;
• Participate to the price analysis of the KIP in a reverse engineering mode based on the SoW/Detailed price/Responsibility matrix. This is to check the consistency between the added value and the price of the KIP
  

In project phase, the position will:

• Analyze the initial sub-contract when the Key Industrial Partners (KIP) is subcontractor or the consortium agreement when the Key Industrial Partners (KIP) is co-contractor, and any potential future variation orders or amendments ;
• Contribute to implementation of Framework Agreements with Key Industrial Partners (KIP) and the Risk Factor action plans under IOD responsibility;

In addition to the above, the Job Holder will be in charge of all the tasks devoted to his/her position pursuant to the Internal Instructions of the Group as well as Board resolutions of the RC.

• More generally, the Job Holder will participate to the securing of the day-to-day operations of the Regional Company and the involved Thales Operational Units with due reference to the best practices and ethics rules.
• The Job Holder will be required to travel from time to time in the Regions covered by the RC

Requirements

• Good understanding of both local industrial partners need for Thales Business Lines as well as of Thales Compliance policies ;
• Good experience in bids, projects, operations, management & negotiation areas ;
• Deep knowledge of the Thales Group and a broad understanding of the various BLs ;
• Business and finance competence ;
• Autonomous, well-versed in internal control, organised, detailed-oriented and work on schedule ;
• Good team player with strong analytical, management, communications and interpersonal skills ;
• Good Leadership competencies in line with Thales Leadership Model.

1. Candidates with project experience in commercial office fit-outs are highly desirable.
2. A minimum of 3 years of relevant work experience is required.
3. Fluent in English, both spoken and written is essential.
4. Basic understanding of the design and calculation of HVAC systems is necessary.
5. Assisting with tender calculations, preparing presentation materials for tenders, and participating in tender interviews.
6. Must be a team player, capable of effectively collaborating and communicating with clients, suppliers, contractors, and team members throughout the project.
7. Monitor project costing and progress payment, variation works and cost control.
8. Proficiency in troubleshooting and resolving technical issues that arise during projects is required.
9. Candidates should be able to manage multiple projects simultaneously and perform well under pressure

Job Objective/s

To be able to develop and maintain engineering and production software platforms. Capable of using C#, MySQL, Google App Script, Javascript, Python languages for developments & modifications. Good understanding of the manufacturing workflow environment type of software requirements. Design and build structured database, Data Visualization, data warehouse, data pollings and AI algorithms fitting our use

Duties and Responsibilities

- Development, administration and maintenance of developed software applications such as DMES, G-suite based applications, and engineering tools like for yield analysis softwares and other softwares
- Develop customized solution of MES system for ATP production; extension of MES system from Fab.

- Analyse Data and create Data Visualization using TIBCO software or related software or dashboards
- Lead cross functional team meetings for software solutions and improvements.

- Develop and maintain software programs that improve efficiency and productivity.
- Write, review user requirements, documentation, test plans and deployment of developed software.
- Prepare User’s Manual and Troubleshooting guide
- Qualify User Acceptance Tests (UAT) of developed softwares and modification before to release

- To follow project management approach for software development & progression

- Capable to do systems integration software

Minimum Education

Bachelor’s Degree

Minimum Experience

Minimum 5 years’ working experience with software development.

Specific Knowledge / Skills

• Ability to develop engineering software using industry standard coding languages such as C#, Python, MySQL Query.
• Knowledge and experience on WPF, Google App Script, MongoDB and JavaScript will be added advantage.