Key Accountabilities:

• Undertake independently the commissioning, installation, maintenance and repair/overhaul of MTU products and its associated equipment at MTU workshop or at site in accordance with MTU manuals and/or specific given instructions.
• Capable in resolving the technical matters and completing the services according to the works order and to the acceptance of the Customers and Supervisors, thereafter, provide the service/investigation reports where applicable.
• Liaise with Supervisors and in-house Technical Specialist for technical assistance, if required.
• Develop and update own skills and knowledge to meet the job requirements through training and self - learning.
• Advise, instruct and train the team members in carrying out the assigned tasks, in using of MTU documentations, tools, customers' drawings, etc.
• Observe the safety regulations of WSHA and guidelines/risk assessment from the company's WHS Committee when performing work at-site or at customer's premises.
• Work assigned from time to time

Qualifications:

• Diploma in Mechanical or Electrical Engineering
• Preferably with working experience on diesel engine.
• Good communication and interpersonal skill, resourceful, team player
• Willing to travel overseas on job assignments

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field
• 5+ years of experience in instrumentation and control system design, analysis, and implementation
• Proficiency in using CAD software for control system design
• Experience with control system programming and software tools such as PLC programming, DCS programming, or SCADA systems
• Knowledge of codes, standards, and regulations related to instrumentation and control systems, such as ISA, IEC, and NEC
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Experience with industrial processes and equipment, such as pumps, motors, and valves, is a plus
• Professional Engineering (PE) license is preferred

• Instrumentation and control systems for industrial processes should be designed, developed, and tested.
• Choose and specify instrumentation parts, such as controllers, transmitters, and sensors.
• Using CAD software, create schematics, diagrams, and layouts for control systems.
• Using software tools like PLC programming, DCS programming, or SCADA systems, develop and put into practice control plans.
• For planned initiatives, carry out cost-benefit evaluations and feasibility studies.
• Ensure that projects are finished on schedule and under budget by working together with project managers, other engineers, and clients.
• Review and approve instrumentation and control system design documents, including specifications, drawings, and calculations.
• Prepare and present technical reports and presentations to clients and other stakeholders.
• Ensure that instrumentation and control systems are designed and installed in compliance with applicable codes, standards, and regulations.
• Provide technical guidance and support to other team members.
• Keep abreast on new developments in the field of instrumentation and control systems as well as market trends.

Responsibilities:

• Take ownership of primary Sales Business Unit, and support assigned secondary Sales Business Unit.
• Establishes prospects within defined business segment
• Sales forecast and planning
• To participate and contribute to planning and meeting both long term and short-term business plan goals at both a strategic and tactical level
• To analyze targeted market segments for opportunities and work with functional teams on strategic projects to win new business
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Research competition and develop customer-specific technical sales strategies
• Responsible for sales turnover through product specifying into target projects through Consultants, Architects or Developers
• Responsible for customers’ technical needs assessment and analysis
• Anchor design and product recommendation to customers
• Support system proposal development, and proposal delivery to customers
• Work closely with various departments to develop winning technical offers, as well as to participates in the preparation of bid responses based on system designs and project specification
• Provides basic training and presentation about products and system solutions to clients
• Provide technical support at construction field, including on-site technical discussions, on-site installation demonstrations, etc.

Job Requirements:

• Experience in Coating/Construction Industry
• Proficient in Microsoft Office and Powerpoint
• Excellent presentation and communication skills, both verbal and written

Essential Attributes:

• Self-driven and willing to take up challenges
• Able to work independently as well as with other team members
• Strong interpersonal and excellent communication skills
• Creative and resourceful individual who possess strong determination for success

Education and Certification:

• Minimum Diploma or Degree in Engineering or equivalent
• Candidates posses own transport

Responsibilities:

• Take ownership of primary Sales Business Unit, and support assigned secondary Sales Business Unit.
• Establishes prospects within defined business segment
• Sales forecast and planning
• To participate and contribute to planning and meeting both long term and short-term business plan goals at both a strategic and tactical level
• To analyze targeted market segments for opportunities and work with functional teams on strategic projects to win new business
• Develops personal customer relationships with prospective accounts to influence opportunities.
• Research competition and develop customer-specific technical sales strategies
• Responsible for sales turnover through product specifying into target projects through Consultants, Architects or Developers
• Responsible for customers’ technical needs assessment and analysis
• Anchor design and product recommendation to customers
• Support system proposal development, and proposal delivery to customers
• Work closely with various departments to develop winning technical offers, as well as to participates in the preparation of bid responses based on system designs and project specification
• Provides basic training and presentation about products and system solutions to clients
• Provide technical support at construction field, including on-site technical discussions, on-site installation demonstrations, etc.

Job Requirements:

• Experience in Coating/Construction Industry
• Proficient in Microsoft Office and Powerpoint
• Excellent presentation and communication skills, both verbal and written

Essential Attributes:

• Self-driven and willing to take up challenges
• Able to work independently as well as with other team members
• Strong interpersonal and excellent communication skills
• Creative and resourceful individual who possess strong determination for success

Education and Certification:

• Minimum Diploma or Degree in Engineering or equivalent
• Candidates posses own transport

Responsibilities:

• Drive optimization of plant capacity, equipment uptime and yield by safe, disciplined & cost-effective operations.
• Provide facilitative leadership and technical expertise in the daily operations of the unit to assist operators in resolving performance gaps vs. production plan.
• Optimize equipment maintenance and/or plant turnaround based on business requirements and/or production schedule.
• Review and reduce energy consumption through implementation of programs, initiatives and projects in the process and utility areas.
• Drive the development and enhancement of the skills of shift team technicians.
• Promote quality culture and drive work discipline in day and shift team operations.
• Participate in review of process and operations (through process safety management) to enhance process safety.
• Develop and lead data-driven productivity initiatives.
• Work with Reliability Engineers in identification of root cause for equipment failure and development of long-term resolutions.

Requirements:

• Bachelor’s degree in chemical, Mechanical or Electrical Engineering
• At least 2 years’ relevant experience in technical/operations function in petrochemical/chemical manufacturing.
• Those without experience but are interested in Chemical Engineering are encouraged to apply.
• Demonstrated ability to understand and apply technical knowledge in chemical process.
• Resourceful and possess excellent analytical & interpersonal skills.
• Willing to work in 12-hour rotating shift environment.

• Instrumentation and control systems for industrial processes should be designed, developed, and tested.
• Choose and specify instrumentation parts, such as controllers, transmitters, and sensors.
• Using CAD software, create schematics, diagrams, and layouts for control systems.
• Using software tools like PLC programming, DCS programming, or SCADA systems, develop and put into practice control plans.
• For planned initiatives, carry out cost-benefit evaluations and feasibility studies.
• Ensure that projects are finished on schedule and under budget by working together with project managers, other engineers, and clients.
• Review and approve instrumentation and control system design documents, including specifications, drawings, and calculations.
• Prepare and present technical reports and presentations to clients and other stakeholders.
• Ensure that instrumentation and control systems are designed and installed in compliance with applicable codes, standards, and regulations.
• Provide technical guidance and support to other team members.
• Keep abreast on new developments in the field of instrumentation and control systems as well as market trends.

We are seeking an exceptionally skilled and detail-oriented NDT

Systems Engineer to join our team. This role demands extensive

expertise in advanced NDT methods, system design, programmin

and hands-on testing. The ideal candidate will have a proven trac

record in operating and programming advanced NDT equipment,

including PAUT, ToFD, DRT, ECT, and ACFM, and will possess

advanced skills in software and mechanical design.

1. Advanced NDT Equipment Handling:

Phased Array Ultrasonic Testing (PAUT): Operate PAU

systems, including setting up and calibrating equipment

configuring probe arrays, and conducting complex

inspections on various materials.

Direct Radiography Testing (DRT): Execute DRT

procedures, including optimizing exposure parameters,

interpreting radiographic images, and ensuring complia

with safety and quality standards.

Eddy Current Testing (ECT): Perform ECT for detecting

surface and near-surface flaws, including setting up test

parameters and analyzing signals.

Alternating Current Field Measurement (ACFM): Utili

ACFM to detect and size surface-breaking defects, includ

setting up equipment and interpreting measurement da

2. System Design and Programming:

Automatic Immersion Systems: Design, program, and

implement automated immersion systems for ultrasoni

testing. This includes developing custom software soluti

and integrating with hardware components.

Software Simulation: Use CIVA software to simulate an

model NDT scenarios, optimizing test setups and predic

inspection outcomes.

Equipment Programming: Develop and troubleshoot

custom programming for ultrasonic testing equipment,

including creating scripts for specific test procedures an

automating test sequences.

3.Technical Skills:

CIVA Software:

Advanced knowledge of CIVA software fNDT simulation and modeling.

SolidWorks and AutoCAD:

Proficient in SolidWorks formechanical design and AutoCAD for technical drawing.

Programming Skills:

Experienced in programmingultrasonic testing equipment, including creating customscripts and automation solutions.

4.Personal Qualities:

Initiative and Hardworking:

Self-driven with a strong wethic, capable of working independently and managing pressures.

Analytical Skills:

Excellent analytical and problem-solviabilities, with a keen eye for detail and precision.

5.Consulting and Solutions:

Offer expert consulting services to addresscomplex NDT challenges, providing tailored solutions baon client requirements and industry standards.

Problem Solving:

Analyze and resolve technical issuesrelated to NDT processes, equipment, and systemintegration.

6.Travel Requirements:

Regional Travel:

Travel to various international locationincluding the Middle East (Saudi Arabia, UAE, Oman, Qaand Asia (Singapore, Malaysia, Indonesia, Thailand,Bangladesh, India) for project assignments.

Adaptability:

Adapt to diverse working environments,including offshore and onshore sites, and handle projecdemands with flexibility.

Application Instructions:

Interested candidates should submit a detailed resume outlitheir qualifications, experience, and relevant certifications.

Please include a cover letter addressing how your skills andexperiences align with the responsibilities and requirementsoutlined above.

Responsibilities:

• Arranges necessary facilities and instruments for jobs such as meters, test kits, temporary preparations, shore generators, and load banks
• Performs testing and commissioning activities and ensures that proper documentations are approved and signed
• Supervises and deploys manpower to execute the operational tasks
• Ensures that electrical equipment and switchboards meet the purchase specifications, and arranges for protection and maintenance of the electrical system
• Reviews commissioning work processes to enhance efficiency and productivity
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department and vendors
• Plans and schedules the testing and commissioning requirements based on project basis, and organises all logistics requirements for major operations
• Performs any other assigned duties and responsibilities

Requirement

• Diploma in Electrical Engineering or related Engineering Disciplines
• Min. 4 years of related work experience working on FPSOs
• Possess working experience related to testing of LV/ MV Switchboards, power generators, DCS / ICSS interface for PMS system
• Capable of testing and calibration of Electrical switchboard and its components, troubleshooting and clear understanding of system specification and class requirements
• Familiar with the testing procedures and applicable rules and regulations of regulatory bodies
• Familiar with test memos and manuals

Our Addresses:

Seatrium - Admiralty Yard

Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Seatrium Limited - Tuas Yard

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Our Working Hours:

Mon - Thu: 8:00 am - 5:15 pm

Fri: 8:00 am - 4:30 pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

OB DESCRIPTION

Job Title

Quality & HSE Engineer

Occupation

QUALITY CONTROL ENGINEER

Job Description & Requirements

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Purpose:

Responsible for performing the final inspection of assembly products to meet Customer's quality standards.

Key Area of Responsibilities:

· Perform In-process and Final Inspection for assembly tools and loose assembly modules to meet the requirement as defined on drawing, WI and any related documents.

· Initiate Material Review Board (MRB) review when part or assembly is not according to requirement as defined on drawing, WI and any related documents during in-process inspection.

· Update outgoing inspection record after Final Inspection to allow monitoring of the internal quality.

· Raise Non-Conformance Report (NCR) for non-conformance found to ensure reject is recorded.

· Support and participate in company continuous improvement program.

Qualification & Experiences:

· Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course

· Preferably with Workplace safety & health in Metal work certification

· Knowledge on quality inspection and buyoff

· No experience are welcome

The Operations Manager will oversee and manage all aspects of the service and repair operations at Perfex, ensuring optimal efficiency, cost-effectiveness, and quality of work. The role involves coordinating service and repair activities for heat transfer products and industrial radiators, managing a team of technicians, and working closely with the production, procurement, and sales teams to meet customer requirements. The manager will also be responsible for continuous improvement of processes, ensuring compliance with safety standards, and meeting customer satisfaction targets.

Responsibilities:

• Oversee day-to-day operations for service and repair, ensuring the timely and effective completion of jobs.
• Manage and coordinate a team of service technicians and repair specialists, ensuring high-quality service delivery and adherence to safety standards.
• Plan, schedule, and monitor repair work to optimize resource utilization and meet customer deadlines.
• Collaborate with procurement to ensure availability of parts and materials required for repairs and maintenance.
• Maintain strong relationships with clients, addressing service inquiries, resolving issues, and ensuring customer satisfaction.
• Implement and monitor KPIs related to service quality, turnaround time, cost management, and safety compliance.
• Drive continuous improvement initiatives to enhance service quality, reduce repair lead times, and improve operational efficiency.
• Develop and implement service policies, procedures, and guidelines to ensure consistency and compliance with company standards.
• Ensure all repairs and servicing comply with regulatory requirements and internal standards.
• Report on operational performance, resource utilization, and customer satisfaction to senior management.
• Oversee the maintenance of service equipment and ensure its operational readiness at all times.
• Manage budget and financial aspects of the service and repair department, including cost control and revenue forecasting.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Operations Management, or a related field.
• Minimum of 5-7 years of experience in operations management, with a focus on service and repair, preferably in the industrial or manufacturing sector.
• Strong understanding of industrial heat transfer products and radiators is an advantage.
• Proven experience in leading teams and managing repair and service operations.
• Solid knowledge of health, safety, and environmental regulations.
• Excellent communication, organizational, and leadership skills.
• Ability to manage multiple tasks in a fast-paced, dynamic environment.
• Strong problem-solving skills and the ability to implement process improvements.
• Proficiency in using ERP systems for planning and scheduling.
• Experience in the manufacturing or industrial service industry.
• Strong technical background in mechanical systems or heat transfer technology.
• Certification in operations management or lean manufacturing is a plus.

JOB DESCRIPTION

- To support Operation Manager to initiate, plan, execute, monitor and control for the entire company’s ongoing projects.

- Coordination between departments from QA/QC, Finance, Engineering, Projects, production, logistic, commercial in local and oversea for smooth operation

- Identifying inefficiencies and areas of improvement

- Resource management

- Any additional tasks out of the above assign by the management

QUALIFICATION:

- Degree/diploma in mechanical/electrical

- Previous HVAC/ACMV experience in Marine/ industry/ land preferred

- Fresh graduate with good working attitude and willing to learn sprit are welcome to apply

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation).
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID, Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.

Requirements:

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above.
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities:

• Preventive and corrective maintenance for DRUPS (Dynamic Rotating UPS) at customers sites.
• Perform schedule preventive maintenance program at various customers’ sites.
• Attend trouble shooting and corrective repair on site
• Identify issues and potential issues from PM activities, provide feedback and possible solution to back office for issue resolution discussion with customers.
• Generate and maintain lean and clear documentation like service report from every service activity.
• Others maybe be needed for customer services.

Requirements:

• Diploma or Degree and above with M&E Engineering background.
• 2-3 years Relevant M&E engineering service or project management experience.
• Good knowledge on electrical system, mechanical, electrical rotating machine functionality, and service methodologies.
• Ability to handle high reliability service demand with technical solution.

We are seeking an experienced and forward-thinking Investment Project Engineer to join our team and be stationed in Singapore. This pivotal role will focus on supporting and driving investment projects to ensure stable and sustainable investment for future growth.

The ideal candidate will play a crucial role in establishing a consistent organization dedicated to long-term investment stability, collaborating closely with both the Japan Mazak staff and the YMS investment team.

Key Responsibilities:

· Lead and support investment projects, ensuring they align with the company's strategic objectives.

· Collaborate with Japan Mazak and cross-functional teams to support YMS investment initiatives, technical requirement and ensure seamless project execution.

· Establish and maintain a consistent organizational framework to ensure future stable investment.

· Conduct thorough reviews of current manufacturing processes and identify areas for enhancement.

· Develop and manage project budgets, timelines, adherence to design specifications and resource allocations.

· Foster strong relationships with internal and external stakeholders to facilitate successful project outcomes.

· Conduct risk assessments and develop mitigation strategies to ensure project success.

· Serve as a key point of contact and resource for manufacturing investment-related inquiries and initiatives.

· Prepare detailed reports and presentations for senior management, highlighting project progress, challenges, and opportunities.

· Stay abreast of industry trends and technological advancements in machine tool manufacturing that could impact investment strategies.

Job Requirements

Education:

· Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Project Management, or a related field.

Experience:

· A minimum of 5-7 years of experience in managing and supporting large-scale investment projects, with a specific focus on equipment manufacturing.

· Proven track record of successfully leading investment initiatives within the equipment manufacturing industry.

· Extensive experience working within Japanese business culture and practices, ideally in a multinational corporation.

Technical Skills:

· In-depth knowledge of equipment tool manufacturing processes, technologies, and industry standards.

· Proficiency in Microsoft Application and possess strong knowledge and mastery of 2D CAD, SolidWorks software, etc

· Strong financial acumen with experience in budgeting, forecasting, and financial analysis related to investment projects.

· Excellent understanding of risk management principles and the ability to develop and implement effective risk mitigation strategies.

Soft Skills:

· Exceptional leadership and organizational skills with the ability to manage and mentor project teams.

· Strong communication and interpersonal skills, with the ability to effectively collaborate with cross-functional teams, stakeholders, and senior management.

· Bilingual proficiency in Japanese and English, with excellent written and verbal communication skills in both languages.

· Strategic thinking and problem-solving abilities to anticipate challenges and devise effective solutions.

Professional Attributes:

· Demonstrated ability to establish and maintain consistent organizational frameworks to support stable future investments.

· Commitment to continuous improvement and innovation in investment project management practices.

· High level of integrity and professionalism in all aspects of work.

Industry-Specific Experience:

· Extensive knowledge of the equipment manufacturing industry, including current trends, challenges, and opportunities.

· Experience in evaluating and integrating new technologies and processes in the equipment manufacturing sector.

· Familiarity with regulatory requirements and standards specific to equipment manufacturing.

Cultural and Business Acumen:

· Deep understanding of Japanese business etiquette, culture, and communication styles.

· Experience in navigating and bridging cultural differences in a global business environment.

· Ability to build and maintain strong relationships with Japanese and local stakeholders.

Manufacturing Engineer (Machining)

This position reports to the Technical Manager and is responsible to provide technical support to the machine shop and subcontract vendors on complex machining methods for both Premier Hytemp Singapore and Malaysia. Technical support may involve design tooling, fixtures, and machining methods for complex features and new product qualifications. The Manufacturing engineer is responsible to lead acquisition and implementation of latest technology (machines) to improve capability and efficiency.

Responsibilities

• Evaluation of complex machine drawings for manufacturing
• Propose and implement tooling & fixtures for machining of complex features
• Support Manufacturing team on new product qualifications and ensure manufacturing is achieving most optimized and competitive hours
• He or she must have strong knowledge on CNC machining process with strong understanding and capability to design fixture or use on best tooling to achieve optimized and competitive machining capability
• Work with Procurement team to develop strategic sub-con machining supplier
• Source and develop new relevant and good machining vendors to company’s approved vendor list
• Provide technical guidance and ensure supplier passes first article approvals
• Involved in daily MRB (Material Review Board) meeting to provide technical input for jobs when non-conformance occurs
• Continuously seek and work on cost savings and new customer development projects
• Initiate and lead continuous improvement projects

Requirements and Qualifications

• Minimum Degree or Diploma in Mechanical Engineering or related field with at least 5+ years of relevant experience
• Candidate should have a strong background in CNC machine shop environment
• Exposure to machining of complex parts for oil & gas equipment is preferred
• Good mechanical / technical skills
• Good understanding of ANSI, ASME Standards and API Products requirements
• Proficient in design and programming software like AutoCAD, Solidworks & MasterCam etc
• Strong communication and analytical skills, team player, energetic and willing to work hard
• The candidate needs to be self motivated with positive attitude and seek career growth
• Ability to prioritize and multi-task in a fast-paced environment

Job Description:

Repair

• Analyse errors independently
• Identify needed spare parts, agree and arrange on order with customers
• Carry out repairs (e.g. mechanics, electronics, hydraulics, control technology, pneumatics)
• Agree on solutions with experts from own area and Regional Service Center
• Documentation of carried out service missions

Installation/Commissioning

• Prepare installation together with customer
• Mechanical and electrical installation of the equipment
• Commissioning of the installation
• Providing operator training on site

Preventive maintenance

• Preventive maintenance according to servicing list
• Advice customers about necessary repair work, if necessary, agree on spare parts with customer and order them
• Documentation of carried out maintenance work

Further responsibilities

• Carry out relocation and retrofitting
• Carry out Service-Updates and data protections

Job requirement:

• Bachelor’s Degree or Polytechnic Diploma in Mechanical/Mechatronic/Electrical Engineering as or equivalent
• Working experience in Repairing, Commissioning and Installing of CNC Sheet Metal Punching /Laser cutting machine.
• Minimum 5 years of relevant experience
• Customer focus
• Communication skills
• Ability to convince customer
• Flexible adaptation to different situations and changing work conditions
• Analytical thinking
• Anticipates problems and takes actions to resolve them
• Cooperates and shares information and knowledge, offers support to colleagues

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Key Responsibilities:

• Lead the structural design and analysis of complex projects, including high-rise buildings, commercial complexes, and infrastructure.
• Ensure compliance with local building codes, standards, and regulations, such as the Singapore Building Control Act.
• Provide technical support during construction, including site visits, inspections, and resolving technical issues.
• Mentor and guide junior engineers, fostering a collaborative and innovative work environment.
• Build and maintain strong relationships with clients, consultants, and contractors.

Job Requirements:

• Bachelor's degree in Civil Engineering or Structural Engineering.
• Chartered Engineer (CEng) with the Institution of Engineers, Singapore (IES) or equivalent.
• Minimum 10 years of relevant experience in structural engineering.
• Proficiency in structural analysis and design software (e.g., STAAD.Pro, ETABS, SAP2000).
• Excellent written and verbal communication skills to effectively collaborate with diverse teams.
• Problem-solving skills and a keen eye for detail.
• Ability to identify and solve complex technical challenges.
• A drive to explore new technologies and methodologies.
• Willingness to work 5.5 days per week.
• In-depth knowledge of local building codes and construction regulations.

As a Marine Design Engineer, you will own engineering responsibilities for all Cavotec’s shipboard shore power retrofit projects. Type of retrofit can be either turnkey, repair and upgrading. Project execution takes place either during voyage or at shipyards, or at times, both.

Shore power/ HVSC/ Alternative Maritime Power (AMP)/ Cold-ironing system enables vessels to connect to shore power while at berth, hence minimizing emissions and noises from the ship’s auxiliary engines. The retrofitted system will be integrated with ship’s existing electrical distribution and necessary instrumentation and monitoring systems.

You will ensure the system design is in accordance with contract specifications, Class rules, and all applicable ship-type and port-specific regulations. You will also participate in the selection of equipment suppliers and service providers for all necessary 3rd party activities. You will have close interactions across all departments of the organization.

Responsabilities:

• Lead the design of shore power system retrofit solutions on vessels.
• Support Project Manager and sales teams throughout retrofit tender stage.
• Incorporate Cavotec’s shore power products on all retrofit solutions. Propose modifications of Cavotec’s products when required.
• Lead all technical discussions and review all technical proposals submitted by external stakeholders.
• Collaborate with marine retrofit team in ensuring retrofit solution is practical and cost-effective during implementation during voyage and/or at shipyard.
• Support marine retrofit team in the selection and management of equipment suppliers and service providers. This includes attending FAT of 3rd party equipments.
• Where required, to appoint and manage the deliveries of engineering contractors.
• Develop shore power retrofit engineering competencies within the organization.

Requirements:

• Degree in Electrical Engineering
• At least 3 years of working experience in the engineering department of shipyards, marine retrofit organizations or shipping companies
• Well-versed in IACS class regulations for merchant ship design
• Resourceful in the ship repair market
• Excellent communication skills
• Fluency in English

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions