We are now seeking Field Service Engineer to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Perform inspection, installation, commissioning, repair, upgrading, troubleshooting and related service work on offshore drilling platforms, land rigs, Shipyard or in workshops.
• Liaise with rig’s management during offshore assignment.
• Communicate with respective Managers for briefing and debriefing of service-related activities.
• Fill in necessary job reports, ISO work instructions and checklists required for all work in a timely manner.
• Interface with relevant departments to obtain a thorough understanding of NOV products and how they are safely operated, tested, calibrated and problems are resolved in a timely manner.
• Communicate field failures and feedback reports to the appropriate departments.
• Install, commission, troubleshoot, and repair NOV drilling equipment
• Provide training to other NOV personnel on the following systems and equipment as needed.
• > Analog and digital PLC based systems
• > Proprietary integrated control systems (Cyberbase, Amphion)
• > Variable Frequency Drives
• > Hydraulic/Pneumatic Systems
• > Electrical Systems (including various types of AC/DC motors)

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.
• Travelling on short notice is required. approximately 50% travelling.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand electrical schematics and PLC programs. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Singfilm Solar provides efficient and stable perovskite solar cells with long lifespans, driving the energy transition from fossil fuels to clean energy. With industry-leading technology and standardized production capabilities, we work to continuously advance the commercialization of perovskite solar cells.

The team is composed of outstanding researchers, including professors and Ph.D. graduates from the world’s top universities, as well as professionals from industry-leading institutions. We are looking for motivated individuals in the technology group, to participate in the development and characterization of new Perovskite PV products and materials.

This role will require a good understanding of PV cell and module performance factors, characterization methods and measurement methodology. The work may require the engineering of test setups, and familiarity with common semiconductor fabrication tools is advantageous.

Job Scope:

• Responsible for one or more fabrication processes

• Work with equipment suppliers to develop new capabilities

• Identifying and executing opportunities for process improvement

• Collaborate with team members to meet customer device specifications and technology development goals.

• Test result documentation and performance analysis.

• Job Requirements/Qualifications: Degree in Physics, Chemistry, Material / Electrical / Chemical Engineering or related subjects with 1-2 years of experience, but fresh graduates are welcome to apply.

• Prior experience in PV development, fabrication or semiconductors will be advantageous.

• Excellent written and verbal communication skills.

• Able to work in a lab and clean room environment.

• Good skills in data analysis.

• Must be target/KPI-driven and well organized.

• Good team player, participate actively in group discussions and shows initiative.

• Good interpersonal skills and ability to communicate effectively with technical and non-technical staff.

• Singaporeans and Permernant Residents preferred.

Role Responsibilities

• Develop and make presentations of prospective client’s request for proposal responses, provide webinar / conference call / in-person presentations to prospects & existing clients, and general sales support services.
• Research, analyse and interpret data on marketplace trends, competitors, customers, suppliers, and changes in the Energy markets, particularly in regard to renewable energy and sustainability.
• Cheek by jowl with existing regulatory and government energy related policies that often affect the energy and carbon markets.
• Participate in the development of microgrids, virtual power plant, EV charging infrastructure and including consulting and other services for clients.
• He/She will work with clients on specific projects and activities, including ongoing communications, project administration and presentation of renewable energy, energy storage, recommendations, and assessments.
• Pursuing new sales leads and development of proposals to global and local clients based on their listed and implied needs. Proposals may be in response to a formal request for proposal or offered per discussions with prospective clients, our an upsell to an existing client.
• Experience dealing with renewable energy IPP/EPC, developers, utilities, and large-scale power producers.
• Understand the growth of renewable and their impact of carbon emissions.
• Contribution to product strategies.
• Maintain company’s clients’ relations i.e., including arranging and participating in meetings with clients, follow ups, and other arrangements.
• Screens, processes, copy and attend to inquires received through VFT’s website and other mediums relative to business development/product enquiry.

Requirements:

• A Bachelor’s degree in Engineering, Environmental Science, Business Administration, or another related field.
• 5 to 8 years or more in strategy, technical sales or consulting, preferably in battery/ energy storage/renewable energy industries.
• Experience in project development, business development in B2B market – an advantage.
• Excellent organizational skills with the ability to multi-task and meet deadlines.
• Team player with good interpersonal and communication skills.
• Good problem-solving and analytical skills.
• Proficiency with MS Office.

Perks of Joining VFT:

• Competitive Salary Package.
• Vibrant Environment & Company Culture.
• Dental, Medical & Hospitalization Insurance.
• Performance-based Variable Bonus.
• Comprehensive Leave Package.
• Convince us with your skills & strengths and we promise you progressive personal & career development opportunities with our leading-edge technologies and industry know-how.

Why Join VFT:

• We offer exciting work in a fast-growing technology start-up. Our company is situated in Singapore (heart of Asia) with one of the finest infrastructure & low personal income tax rates.
• We offer our employees excellent working conditions, and numerous opportunities for development.
• Our team is diverse, multi-cultural and shares the drive to make a difference and create change.
• We encourage our team to bring in their ideas and take initiatives that make them proud of.
• We foster a rapidly scaling working environment with a very entrepreneurial, innovative, and collaborative culture.
• We see the opportunities, where others see problems.

About Us:

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT solution is proven to be one of the safest, most durable and environmentally friendly battery technologies.

VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU. VFT founders and management team have deep experience in the renewable space, and Vanadium redox flow technology.

VFT is passionate about powering tomorrow’s energy demands in a sustainable way. To achieve this, we believe in attracting great talent through the creation of a vibrant, progressive workplace that makes them our greatest assets. We’re always on the lookout for experienced and passionate individuals to be part of the team, working and collaborating effectively to make a positive difference.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Your Job

As a Plating Engineer, your primary purpose is to develop and optimize plating process engineering that aligns with customer requirements. You will work on implementing low-cost, high-efficiency plating production technology. This role involves strategizing plating processes for new projects, ensuring the feasibility of product designs, analyzing and mitigating risks, and collaborating with various teams to enhance plating quality.

Our Team

You will be reporting to the Plating Expert. You will be part of the Division of DSS, specifically within the Manufacturing Engineering Development department and the Plating ME section. You'll work closely with a diverse group of professionals, including Product Managers, Product Designers, AQP, Project Management Engineers, Tooling Designers etc.

What You Will Do

• Develop and optimize the plating process engineering to meet customer requirements, focusing on cost-effectiveness and efficiency.
• Collaborate with project teams to strategize plating processes for new developments and design plating processes.
• Ensure the plating manufacturing feasibility of product designs and address any potential risks.
• Work with design, manufacturing, and other process teams to innovate and improve processes.
• Involve yourself in designing new tooling for existing and new products and assist in resolving production and quality issues.
• Engage in New Product Introduction and plating manufacturing engineering, and solve plating quality issues.
• Participate in Equipment 3D Design projects to enhance plating capabilities.

Who You Are (Basic Qualifications)

• Develop and optimize the plating process engineering to meet customer requirements, focusing on cost-effectiveness and efficiency.
• Collaborate with project teams to strategize plating processes for new developments and design plating processes.
• Ensure the plating manufacturing feasibility of product designs and address any potential risks.
• Work with design, manufacturing, and other process teams to innovate and improve processes.
• Involve yourself in designing new tooling for existing and new products and assist in resolving production and quality issues.
• Engage in New Product Introduction and plating manufacturing engineering, and solve plating quality issues.
• Participate in Equipment 3D Design projects to enhance plating capabilities.

What Will Put You Ahead

• A Bachelor’s Degree in Electrochemistry, Electrochemical Engineering, Materials Science/Engineering, or an equivalent technical discipline is preferred.
• Experience in the plating manufacturing processes of connectors and familiarity with connector applications and performance.
• Expertise in designing plating equipment and a minimum of three years of experience at an electrical connector manufacturer or with a plating chemistry/process supplier.
• Proficiency with design tools such as NX and CAD (2D/3D) and a strong foundation in plating technical expertise.
• A good team player with qualities such as humility, respect, and a positive attitude.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructure, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking a People Manager to guide and mentor a team of technical professionals, fostering a collaborative and high-performance work environment.

Responsibilities

•Provide technical leadership for our cybersecurity product capabilities development and sustenance.

•Technology Subject Matter Expert who understands security landscape and solution credibly with ability to work with cross-functional team including solution architecting, pre- and post-sales engagements, project management to deliver cybersecurity product solutions.

•Set strategic direction in alignment with business objectives, keeping abreast of industry best practices.

Requirements

1. At least 10 years of software development experience of which at least 5 years are in a technical leadership role in cybersecurity

2. Relevant Industry Certifications such as CISSP, CSSLP, PMP or equivalent

3. Technical knowledge in following is a must:

i. Cloud Architecture: Planning and implementing the applications & data to the cloud and ensure organization’s technical and business requirements are met.

ii. Networking Knowledge: Demonstrate expertise in networking concepts, protocols, and technologies, with the ability to design and implement complex network infrastructures.

iii. DevOps: Drive the adoption of DevOps practices within the organization, including continuous integration, automated testing, and continuous delivery.

iv. Software Version Control: Implement and manage software version control systems to track changes, facilitate collaboration, and ensure code quality.

4. Previous experience working on government projects specifically in cybersecurity environment and governance, risk management and compliance is an added advantage.

5. Effective communication and presentation skills with ability to transpose complex security concepts into business terms/impacts.

6. Experience with deployment orchestration, automation and security configuration management

7. Ability to work easily with diverse and dynamic teams

Work location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Responsibilities:

• Assist Piping Lead Engineer and execute the tasks assigned by Lead Engineer with no or minimum supervision.
• Lead a group of piping engineers and designers to execute the tasks assigned by Lead Engineer or/and monitor the work executed by engineering design house where applicable.
• Review and monitor engineering design progress related to piping work scopes.
• Prepare and raise technical query (TQF) and engineering variation order (EVO) related to piping for additional work scopes.
• Align the piping design output (such as piping isometric drawing, pipe spool drawing, etc) with construction team to ensure all the information required by construction teams are incorporated.
• Understand department and project specific design workflow.
• Understand Contract Specification and project requirement summary.
• Understand Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and piping routine requirements.
• Understand equipment layout plan (include escape route, maintenance space, mechanical handling, other equipment).
• Understand non-piping design related requirements such as fabrication, erection, painting, QA/QC, testing and commissioning.
• Responsible for ensuring that all works meet scope and technical quality of the project and comply with project requirements.
• Monitor P&ID revisions and ensure the compliance between piping 3D model with latest P&ID.
• Monitor design input need date and data required to execute the piping design works.
• Monitor 3D model clash and design review comments / punch lists.
• Monitor the comments from Client and Classification Society.
• Monitor all the piping related interface points.
• Monitor all the hotwork, tank’s coating and drydocking related activities where applicable.
• Monitor piping procurement status and surplus material due to drawing revision.
• Monitor all the hold items that affecting piping design completeness.
• Monitor and control the development of piping weight.
• Ensure proper communication and workflow are well established between piping stress team with pipe routine and pipe support designer team. Closely monitor the compliance between piping 3D model with the latest pipe stress analysis report.
• Review/comments piping arrangement, isometric and pipe supports drawings from piping designers.
• Review/comments on piping calculations carry out by other piping engineers/ subcontractors (e.g. pipe stress analysis report, flow master report, surge analysis report).
• Review/comments technical proposal from vendor.
• Review/comments vendor certified Document (VCD).
• Monitor and control drawing revisions especially when construction already started.
• Ensure proper communication and workflow are well established between piping designing team with construction team. Monitor the compliance between piping construction drawing (piping isometric and pipe support drawing) with the latest 3D model.
• Monitor the piping design database completeness (such as 3D model attributes, etc) to meet the project Digital Engineering requirements.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Onboard vessel to carry out inspection at site.
• Provide support to piping construction, QA/QC and other non-engineering design related activities such as inspection, coating, painting, welding, test packages, etc.

Requirements:

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Min. Bachelor Degree in Mechanical Engineering.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.
• Good knowledge in Piping Design.
• Good knowledge in International Standards related to Piping such as ASME, ASTM, API and Classification Society Rules and Regulations.
• Good skill in Excel is preferred.
• Experience in using AutoCAD, Naviswork, Smart Plant, Aveva, Cadmatic, etc. is preferred.

Overview:

To lead a team of personnel (Yard and contractors) on the efficient operation of activities carried out onboard vessel (offshore newbuilding, repair, conversion and modification) or workshop and ensure that works are completed within stipulated schedules with skill, efficiency, quality and innovative solutions. Operation activities include practical design, practice procurement, project management, construction, installation, testing and commissioning. Lead the Safe Distance Officer for Covid-19 or similar where applicable.

Responsibilities:

• Administers, monitors and continuously ensures that all operations conform to safety requirements and maintains high safety standards.
• Based on defect list given by ship owner, plans, prioritises and executes repair activity based on available resources and facilities. Provide information to APM for any CM39 requisition
• Co-ordinates and disseminates all the repair activities in the repair process in a given schedule with supervisors, yardmen and contractors in accordance to the Department Work Instruction and specifications.
• Attends vessel safety co-ordination meetings to ensure that all repair activities are carried out in a safe environment and meets the applicable statutory, regulatory and contractual requirements.
• Attends department production meeting to co-ordinate work progress, update work schedules promptly and scope of work. Highlight critical path and also channel to Ship Repair manager to achieve project milestones and prevent cost overruns.
• Liases with Shiprepair Manager/ Billing Dept about variation and additional in work scope. Raise variation order for additional work not stated in the specs
• Liaises and coordination with relevant trades towards milestone set
• Liaises with Superintendent for critical activities for smooth operation and provide technical proposal.
• Ensure cost control by correct Just In Time material ordering, proper manpower deployment and reporting, rework prevention, continual improvement on work method in order to meet the EVA, KPI and Key Thrust set by the department
• Feedback to HOD and superior on any non-conformance and record in Incident reporting and follow up on corrective actions
• Ensure all completed works carried out are documented and verified by Client
• Contractors work completion report verified as per actual carried out
• Ensure proper usage of department assets and report any non-conformance
• Whenever required communicate through by means of IT networking and solutions
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations and HSE operating procedures and conduct Risk assessments before commence of work. Counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures and Audit Matters e.g. ISO9001:2015, ISO45001:2018 and ISO14001:2015.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed. Perform Safe Management/ Distancing Officer duties stipulated when assigned
• Any other associated tasks and responsibilities assigned from time to time.

Preferred Requirements:

• Preferably with 2 years’ working experience in a similar capacity.
• Effective planning skills, good supervisory ability, conflict management skills and interpersonal skills.
• Effective problem solving and decision making skills are also essential.
• Ability to communicate in other languages (like Mandarin, Tamil, and Malay) would be an added advantage.
• Basic knowledge on Piping Standard and Compliance with all Codes, Policies, Procedures e.g. ASME Code for Pressure Piping B31.3, ASME IX, IACS
• Resourceful, dynamic, excellent leadership qualities, tactful, committed, good team player, customer oriented and able to work under stressful situations.

Preferred Qualifications:

• Minimum primary education with relevant working experience or diploma in Marine Engineering or Mechanical Engineering or NTC 3 certification or equivalent or completed apprenticeship in Marine Piping and Plumbing.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

Geotechnical:

- Experienced in the design of earth retaining and stabilizing structures, deep foundations, reclamations, slope stabilities.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Responsibilities

· Assist Project Manager in project management, survey, managing site works, construction activities, monitor work schedules, update progress, planning and implementation in accordance to master work plan and scope of work within project budget.

· Provide guidance and supervision to contractors/ in-­house workers in relation to Electrical/ Structured cabling works in accordance to proposal for site build for cabling infrastructure, installation quality, and adherence to site work safety requirements and to resolve technical issues.

· Prepare project submissions, tenders, system designs, installation drawing & coordination of all technical activities on assigned projects

· Participate in project meetings and resolving project issues

Requirements

• Candidates should possess at least a Nitec/Diploma in Electrical/ Engineering or its equivalent.

• At least 1-­3 years Project Management and hands on working experience in Electrical and/or Structured Cabling.

• Able to read/write and speak English is a must.

• Able to work independently and/or work together in a team when needed.

• Able to multi­task

• Have a strong sense of leadership, customer oriented and problem solving skills

· Proficient in Microsoft Office

- Working Mon to Alt Sat from 8.30am to 5.30pm

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Create, review, administer and update (monitor & track) construction schedule for project
• Collaborate with other disciplines to collate/provide scheduling data — subcontract change requests, bid comparisons, new work item estimates and resolution of potential schedule/work problems
• Interface and work closely with project team and sub-contractors to ensure required progress
• Liaise with managers and engineers to discuss the progress of the project and address any issues that may arise
• Liaise with external contractors and suppliers to organize the phases of the construction development and scheduling
• Prepare cost estimations and detailed man-hour calculations
• Monitor and track/record work delay/progress and prepare scheduling reports
• Analyze gaps between the planned and actual progress and highlight the areas of concern to project management
• Prepare Project site daily, weekly, and monthly reports and project schedules
• Prepare cost estimation for any additional works and variation order
• Prepare Project site minutes of meeting (MOM) for the current progress meeting and other site meetings
• Any other duties to be assigned from time to time

Pre-requisites:

• Diploma/ Degree in Mechanical Engineering
• Minimum 3 years of experience in a similar role for power plant / industrial plant projects
• Proficient in Primavera P6 and/or MS project
• Candidates with experience in power plant projects will have an added advantage
• Independent and able to communicate effectively at all levels with other disciplines
• Good time management and planning
• Good organizational skills and methodological approach
• Strong attention to details
• Willing to work under pressure and in construction site conditions

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned

Requirement:

• Bachelor’s Degree in Civil Engineering or equivalent
• Able to lead and work independently
• Proficient in Microsoft Office and AutoCAD
• Good communication skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Highlights:

Immediate hiring

Accessible via public transportation

We provide opportunities for career advancement within the company

Benefits:

Working Hours: 8 am-6 pm (6 days)

14 days Annual Leave after confirmation

14 days Medical Leave (completion of 3 months service)

$200 medical claim per year

Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Sales Engineer, Engineering Service & Solutions

Reporting to the Sales Manager, you will be responsible for developing new business opportunities. You are required to generate and develop sales lead leading to creating a customer base. This will include increasing sales revenue and maintaining good relationships with existing customers, gathering and monitoring market information and preparing sale plan to meet targets.

Requirements:

· Degree or Diploma in Electrical Engineering

· Relevant sales experience will be an advantage

· Must be customer oriented and a team player

· Able to work independently and self-motivated

· Must be goal driven and target achievement oriented

· Able to carry out presentations

· Must own a car

· Able to travel when required

Scope of the role

Electrical Engineers apply their skills and expertise to generate solutions that require development or sustainment of new or improved techniques, procedures, or products. Your success includes assisting with planning, conducting, and evaluating approaches to meet project objectives in a timely, cost-effective fashion.

Job Responsibilities

• Analyze, design, develop, and maintain products; assist in commercialization.
• Assist in identifying and organizing requirements. Apply usability procedures and principles at project or product-line level or through customer input.
• Build prototypes, products, and systems for testing; set up and run laboratory simulations.
• Design testing procedures and coordinate testing. Conduct tests, document results, and develop client presentation.
• Conduct and/or participate in technical reviews of requirements, specifications, designs, codes, and other artifacts.
• Evaluate engineering approaches and risks to produce and iterate development plans.
• Train and support clients and field representatives.
• Identify and keep abreast of novel technical concepts and markets.
• Contribute to design standards and support design reuse.
• Author technical reports, papers, articles, presentations, and patents.

Job Requirements

• Master’s, or bachelor’s degree in electrical or electronic engineering
• Excellent verbal and written communication skills in English
• Eagerness to take on challenges and to learn new skills

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

Job Requirements:

• Use AUTOCAD system to draw construction shop drawing
• Provide support on daily operation activities which including office upkeep/maintenance
• Coordinate work arrangement with internal & external stakeholders
• General office support
• Handle sensitive information in confidential manner
• Develop & update administrative systems to make them more efficient
• Documentation and simple processing duties
• Determines project schedule by studying project plan and specifications, calculating time requirements, and sequencing project elements.
• Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems

Job Requirements:

• Knowledge of MS office
• Proactive & able to work
• Able to work in fast paced environment Bachelor’s Degree Engineering (Civil) or equivalent
• Minimum 3 years of Civil Engineering / Structural & AUTOCAD draw experience in related fields
• A proactive and resourceful individual who possess good communication, negotiation and presentation skills
• Good communication and analytical skills, able to interact with people of all levels

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Title: Sales Engineer

Department: Sales

Reports to: Regional Sales Manager

Location: Singapore, Malaysia, Indonesia, Thailand, Vietnam

Job Summary:

The Sales Engineer will be responsible for driving sales, developing business relationships, and providing technical expertise to clients in the fields of interior design, supply and installation, HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting. The ideal candidate will have a strong technical background combined with exceptional sales skills and the ability to work across multiple countries in the Southeast Asian region.

Key Responsibilities:

1. Sales and Business Development:

- Identify and develop new business opportunities within the specified regions.

- Establish and maintain strong relationships with existing and potential clients.

- Conduct market research to understand customer needs, market trends, and competitive landscape.

- Prepare and deliver technical presentations and demonstrations to clients.

2. Technical Expertise:

- Provide clients with technical advice and support on a range of products and services.

- Collaborate with the engineering and product development teams to understand product specifications and capabilities.

- Assist in the customization of products to meet specific client requirements.

3. Project Management:

- Oversee and coordinate the installation and implementation of products and systems.

- Ensure projects are completed on time, within scope, and within budget.

- Liaise with contractors, suppliers, and internal teams to ensure successful project execution.

4. Sales Administration:

- Prepare and present sales proposals, contracts, and agreements.

- Track and report on sales performance and progress against targets.

- Maintain accurate records of customer interactions and transactions in the CRM system.

5. Customer Service:

- Provide post-sales support to ensure customer satisfaction and repeat business.

- Address customer inquiries and resolve issues in a timely and effective manner.

- Gather customer feedback and work with internal teams to improve products and services.

6. Travel:

- Traveling within the designated region to meet clients and manage projects as require.

- Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Qualifications:

- Minimum of 3-5 years of experience in sales engineering or a related technical sales role.

- Sound technical knowledge in one or more of the following areas: HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting.

- Excellent communication, negotiation, and presentation skills.

- Ability to work independently and as part of a team.

- Proficiency in MS Office Suite.

- Ability to travel as require within the region.

Benefits:

- Competitive salary.

- Health and dental insurance.

- Opportunities for professional development and career advancement.

- Travel allowances and reimbursement.

Job Responsibilities

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
  Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab would be advantage.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Scope:

• To carry out water sampling for process unit and send to lab for analysis and follow up with the recommendation in process.
• Operate Boiler / Evaporator / cooling tower / RO in the WasteWater Plant
• Control Pane operation through SCADA system to monitor and adjust process parameters.
• To update test result in data system
• To handle general workers in the plant for daily plant works and chemical handling
• To maintain all the process units/ pumps and equipment’s and instrument in good condition.
• Company Emergency Response team member
• To support shift ad-hoc operation

Requirement:

• Education – NITEC & above
• Skills - Basic English communication includes reading and writing skill
• Abilities – Ability to work independently
• Other characteristics such as personal characteristics – Team player with interpersonal skills (gentle, considerate and patient)
• People certified with Forklift / WAH/AWSHPP/ Boiler attendant class-1 have added advantage.