Roles & Responsibilities:

. Monitor progress, quality of workmanship and compliance with authority requirements.

. Highlight and advise the project staff on the interfacing of M&E services and the building works

. Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission

. Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission

· Able to understand and has a good knowledge in electronics (e.g. Electronic Circuit Diagram)

· Able to read and draw floor plans and schematic diagrams using AutoCAD

· Able to communicate well in written and verbal communications

· Able to work independently and adapt to a dynamic working environment quickly

· Participate in product requirements definitions

· Develop hardware requirement and specification documentations

· Participate in test strategy development, methodology, test plans and cases

· Design and integrate power electronics and motor control system

. Motivated, responsible with positive attitude and able to work under pressure and stress.

. Successful candidate able to work after office hours depend on site/project schedule

· Knowledge in electrical termination and troubleshooting is an advantage

· Knowledge of computer skills and software such as Microsoft (Excel, Word, PowerPoint)

· Able to work under pressure to meet project deadlines and multiple accounts/projects.

· Proficient in writing daily reports

· Perform project coordination, system installation, termination, testing & commissioning

. Leading Testing and Commissioning of project team and conduct training to customers after completion of project.

. Provide technical support to customers and site project team in the selection of equipment for the project.

. Support in acquiring new opportunities – Tenders and Business Development.

. Performs other duties as assigned.

· Perform user operation training of the system installed

· Organized, fast learner, proactive, able to multi-task and with positive attitude

. Support internal for spare parts warranty, preparation, and assembly.
. Improve on site report and process.

. Excellent problem-solving skills, attention to detail, and the ability to work in a fast-paced startup environment.

. Strong experience with PCB design, layout, and simulation tools (e.g. Eagle, Autocad).

· Perform field service to troubleshoot and rectify system fault

· Required to carry out standby duty for servicing and answering calls

· Attend site coordination meeting and site walk

. Able to coordinate with contractors and consultants for engineering issues and drawing plans.

. Perform all duties in accordance with company policies, processes, systems and procedures.

ABOUT AMS

We’re inventing the future, right here, right now, at Thales. We design the critical security solutions of tomorrow by combining the curiosity to explore, the intelligence to question and the vision to create. Together we solve complicated problems by combining our experience in the market with our leading research and development capabilities.

Be part of revolutionising our skies for the future of aerospace. A future where all modes of aircrafts piloted or unpiloted, civilian or military move around our skies safer, more efficiently and sustainably for a greener and more harmonised airspace.

ROLE DESCRIPTION SUMMARY

The Senior Network Engineer is responsible for the provision of network integration activities for the respective project and/or bid activity. The Engineer is a key member of the Hardware Deployment & Integration team that provides:

• Technical and resource supervisory input to Network Integration and Deployment engineering activities

• Skilled input to the Network Integration and Deployment activities within the respective project engineering segment, and

• Assistance to the Integration Group for bid response activities.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Network Engineer, you are accountable for:

For Projects:

· Revise solution architecture drawings and diagrams, cost templates (devis), the List of Supply (LOS) / Bill of Materials (BOM), and interfaces at the start of the project.

· Create and/or update network integration engineer contributions to the Solution Specification and Design documentation, Network Acceptance Test Procedures, and other associated network integration documents.

· Define equipment configuration for the ATM solution(s) and coordinate with Hardware Deployment and Integration management for assembly of the ATM system and interface with Tools Engineering, Customer Service and Site Services departments where necessary to accomplish this task.

· Load, configure, validate, and hand over equipment to Software Integration in the factory and on customer sites.

· Support configuration changes to system platforms in factory and customer sites.

· Attend Design Reviews with customers.

· Provide customer training.

· Identify risks at solution architecture level and propose where possible alternate validated solutions.

· Provide system and networking expertise useful in the design.

· Follow and contribute to the development and enhancement of engineering processes

· For Bids / Tenders:

· Creation and Peer Review system architecture diagrams.

· Creation of the List of Supply (LOS) / Bill of Materials (BOM)

· Creation of Hardware Integration section in the Engineering Department devis.

· Definition of system interfaces.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

Relevant bachelor’s degree or Master Degree

Technical skills

§ Must-have

ü Cisco formal certifications (CCNP, CCNA etc)

ü Good level of knowledge of, and experience with Unix/Linux (Redhat distribution preferred) Operating System

ü Familiarity with a wide range of Computer and Networking hardware (preferably Cisco)

ü Scripting (TCL/TK, Perl, & Shell)

ü Able to work on multiple activities con-currently and effectively self-manage (autonomy)

§ Nice-to-have

ü Work experience in a mission-critical, near real-time environment preferably ATC-related

ü Experience in large and distributed networked computer systems

Interpersonal skills

ü Sense of ownership

ü Team player

ü Verbal and non-verbal communication,

ü Listening skills,

ü Problem solving,

ü Decision-making,

ü assertiveness,

ü patience,

ü empathy

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

1. Provide technical support to business opportunities.

2. Support to Project-designated product or proposal. Comprehensively coordinate resources, successfully accomplish project POC (Proof of Concept) with significant effectiveness.

3. Prepare project delivery, plan design and review, testing and verification, to ensure that the solution can be stably implemented.

4. With active promotion, projects executed in reasonable process, and delivered with high quality and detail and accurate project materials and deliverables in time.

5. Quickly solve problems in the progress and receive good comment from customers; promptly feedback problems to corresponding departments with advice valuable for effectively improving products and solution;

6. Continuous follow-up on Projects, maintain project delivery record and data sorting; participate in project acceptance test and presentation, and produce project summary report after completion of the project.

7. Collection and Analysis of System and Product Needs, Output of Quality Report, Collection and Analysis of Competing Product, Comprehensive Record of Mid/Large-scale System Implementation.

8. Provide technical support in new product/proposal introduction, material output of product technology, material output of product promotion, marketing activity support.

9. In charge of Planning and Implementation of Customer/User Training

Responsibilities:

1. Responsible for technical support;

2. Write product solutions and responsible for inquires of technical parts of related products.

Requirements:

1. At least Polytechnic or Bachelor’s degree in engineering, telecommunication or computer science related.

2. At least 1 year experience of technical support in IT/CCTV/telecom related industry;

3. Good communication skills and sense of customer-focus, fluent in English and Mandarin preferred as role requires candidate to deal with Mandarin speaking clients.

ROLE:
A*STAR-IME is leading the way in establishing industry first 200mm open Silicon Carbide (SiC) R&D program. The program specific focus is on advancing 200mm SiC technologies in key areas such as epitaxy, gate stack, ion implantation, and dry etching, and integrating these modules to fabricate high-performance power devices. Our objective is to drive innovation in power device research, particularly in power MOSFETs rated above 1.2KV. Developing key innovative process is crucial for creating high-performance devices that will contribute to advancements in automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. This role involve growing leadership into ion implantation processes for p-body, channel, guard ring, source contact, and other components. We are currently seeking such individual with ~5 years of experience in ion implantation. The chosen candidate will be responsible for independently supervising ion implantation processes, conducting ion implant simulations, possessing knowledge of crystallography and ion interaction with atoms, having strong understanding of implanters and related thermal processing physics, beam optics, dosimetry systems, and vacuum technology. The ideal candidate should also be willing to collaborate with various departments, the technology development group, and customers. Furthermore, the candidate will contribute to the wide-bandgap team by sharing the ion implantation expertise on compound semiconductor materials and collaborate with other departments working with Si-based technology. The candidate will also be groomed to lead this diffusion process module group of ~6 headcounts into the future.

RESPONSIBILITIES:

• Diagnose malfunctions and using test equipment & software to test faulty tool; applying knowledge of the functional operation of the ion implant equipment

• Support on-site ion implanters in creating, running & characterizing recipes for recipe validation and develop process to achieve the desired dopant profile with excellent
damage recovery.

• Collaborate with vendors to optimize equipment performance and reduce tool downtime

• Analyze data related to implant-related defects formation with quantification and defects minimizations strategy

• Examine work-orders and communicates with equipment operators to resolve equipment problems & determine mechanical and human errors contributed to the issues

• Perform scheduled preventive maintenance tasks with tool operators, especially in checking, cleaning, repairing, detecting and preventing problems

• Responsible for designing experiments for ion implantation at various dose, energy, tilt, and twist levels

REQUIREMENTS:

• Ms/PhD Degree in Electrical Engineering or related field

• >3-5 years industrial experience for high power device design and modeling

• Extensive proficiency in medium to high energy/current ion implantation processes, including a comprehensive knowledge of implant equipment, equipment parts, and
troubleshooting techniques to minimize equipment downtime

• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species

• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile

• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors

• Familiarity with essential device properties resulting from ion implantation

• Adept at mentoring and transferring knowledge to junior staff members

ROLE:
A*STAR-IME is leading the way in establishing industry first 200mm open Silicon Carbide (SiC) R&D program. The program specific focus is on advancing 200mm SiC technologies in key areas such as epitaxy, gate stack, ion implantation, and dry etching, and integrating these modules to fabricate high-performance power devices. Our objective is to drive innovation in power device research, particularly in power MOSFETs rated above 1.2KV. Developing key innovative process is crucial for creating high-performance devices that will contribute to advancements in automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. This role involve growing leadership into ion implantation processes for p-body, channel, guard ring, source contact, and other components. We are currently seeking such individual with ~5 years of experience in ion implantation. The chosen candidate will be responsible for independently supervising ion implantation processes, conducting ion implant simulations, possessing knowledge of crystallography and ion interaction with atoms, having strong understanding of implanters and related thermal processing physics, beam optics, dosimetry systems, and vacuum technology. The ideal candidate should also be willing to collaborate with various departments, the technology development group, and customers. Furthermore, the candidate will contribute to the wide-bandgap team by sharing the ion implantation expertise on compound semiconductor materials and collaborate with other departments working with Si-based technology. The candidate will also be groomed to lead this diffusion process module group of ~6 headcounts into the future.

RESPONSIBILITIES:

• Diagnose malfunctions and using test equipment & software to test faulty tool; applying knowledge of the functional operation of the ion implant equipment

• Support on-site ion implanters in creating, running & characterizing recipes for recipe validation and develop process to achieve the desired dopant profile with excellent
damage recovery.

• Collaborate with vendors to optimize equipment performance and reduce tool downtime

• Analyze data related to implant-related defects formation with quantification and defects minimizations strategy

• Examine work-orders and communicates with equipment operators to resolve equipment problems & determine mechanical and human errors contributed to the issues

• Perform scheduled preventive maintenance tasks with tool operators, especially in checking, cleaning, repairing, detecting and preventing problems

• Responsible for designing experiments for ion implantation at various dose, energy, tilt, and twist levels

REQUIREMENTS:

• Ms/PhD Degree in Electrical Engineering or related field

• >3-5 years industrial experience for high power device design and modeling

• Extensive proficiency in medium to high energy/current ion implantation processes, including a comprehensive knowledge of implant equipment, equipment parts, and
troubleshooting techniques to minimize equipment downtime

• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species

• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile

• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors

• Familiarity with essential device properties resulting from ion implantation

• Adept at mentoring and transferring knowledge to junior staff members

Responsibilities

• Work with outsourced service providers and product principals to manage the delivery, operations as well as Tech Refresh for Microsoft suite of services:o Microsoft 365 (such as Exchange Online, OneDrive, SharePoint Online,Teams, Viva etc.)

o Dynamics 365 including Power BI, Power Automate and Power Platform

o MS Enterprise Mobility Suite (Intune, MCAS Azure Information Protection)

o Microsoft Entra (configuring and setting up the synchronisation of on-premise AD with

Microsoft Entra ID, federation services)

o Other Microsoft products such as Stream, Telephony services.

• Ensure the operations process and controls are clearly documented and operationalised
• Plan, design and support Technology Refresh and migration activities for the infrastructure services.
• Ensure smooth service delivery and implementation within the business context.
• Understand technical, quality management and security guidelines and policies and ensure operations processes and supporting systems comply with these policies and guidelines.
• Manage infrastructure operations and support and ensure delivery of services meet agreed service levels.
• Propose new solutions to enhance operational efficiency and improvement of infrastructure.
• Other duties as may be delegated by the Manager or Team Lead from time to time.

Job Responsibilities:

• Determine and identify new business opportunities by analyzing business needs in the Government Sectors.
• Preparation of business development plan, define and follow up which in line with the sales targets and objectives.
• Analyze and clarify Tender Bids and RFQs (Request for Quotation) or opportunities during pre-tender and tender phase.
• Lead and organize tender preparation, reviews and submissions in order to ensure completeness in quality, technical and risk compliance, and on time tender submission.
• Consolidate and analyze technical, bill of quantities, price schedules, cost/quotes, financial data and commercial contract in order to ensure technical compliance, risks mitigation and competitiveness during tender preparation and clarification phase.
• Arrange project involvement during Tender stage and manpower planning with project to come up with project organization chart and preliminary cost.
• Enhance and consolidate quotes in order to reach target win price and to prepare Tender Evaluation for management approval for tender Operating Profit Margin.
• Lead and execute tender interview presentation in a professional manner to increase win rate.
• Lead and organize tender reviews and meetings in order to ensure completeness and quality handover to project management team.
• To manage, coordinate and conduct the sales activities to achieve sales target and profitability target for the Company.
• Handling of client and commercial issues, i.e. enquiries, terms and condition, payment schedules, complaints.
• Identify and manage calculated risk in each sales opportunity.
• Coordination of regional / global contracts.
• Provide market information and participate in direct marketing strategy or planning.
• Attend conferences, meetings and industry events to grow the pool of partners to aid in expanding the range of services.

Job Requirements

• Bachelor’s degree in Civil or Structural Engineering preferred.
• Prior experience in building engineering and construction is preferred.
• Proven experience (3-5+ years) in tendering for government projects, business development, or a similar role.
• Experience in dealing with Government Authorities.
• Strong negotiation, communication, and interpersonal skills.
• Analytical thinking and data-driven decision-making abilities.
• Familiarity with market research, lead generation, and sales pipeline management.
• Ability to develop long-term strategies for client acquisition and retention.
• Proven track record of driving revenue growth.
• Goal-oriented with a focus on results and outcomes.
• Ability to network and forge strong relationships within the industry.

McConnell Dowell South East Asia is looking to hire a Project Engineer for a major civil infrastructure project in Singapore.

About the Role

• Assisting Senior Project Engineer and Construction Manager with daily site activities.
• Monitoring/reporting site progress (direct employees and subcontract works).
• Formulation of procedures for construction activities.
• Plan the works and develop look-a-head programmes.
• Liaise with the design coordination team to resolve technical discrepancies including preparing and submitting technical queries and meeting with design consultants as required.
• Manage the schedule of shop drawings and monitor the output of drafters.
• Plan the equipment and material requirements and raise purchase requisitions as required.
• Mentor and manage Site Engineers assigned to your zone/works areas.
• Review the authority approvals required (BCA, Utility Clearances, etc) ahead of the works and ensure submissions are made such that the clearances can be achieved before works start.

About You

• Degree in Civil or Structural engineering.
• Minimum 5 years of relevant on-site civil construction experience with project management skills.
• Preferably with experience and knowledge in the civil infrastructure works field.
• Good interpersonal and communication skills.
• Able to work alternate 6 days work week.
• This is a short-term contract employment.

If you are interested in adding value and contributing success to building a key infrastructure project, we encourage you to apply for this exciting opportunity with McConnell Dowell.

About Us

McConnell Dowell – Creative Construction

Our purpose is Providing a Better Life. We do that through delivering projects that connect, support and sustain communities, and through providing career opportunities that challenge, reward and grow our people.

From remote major resources and energy projects to city-shaping transport and water infrastructure, we have constructed thousands of high-quality, complex projects for our customers and communities over more than 60 years, in Australia, New Zealand, the Pacific Islands and Southeast Asia.

Why join us?

The work you’ll do will have a tangible positive impact on people’s lives, including yours. The diversity of our projects, roles and locations means greater development opportunities. We invest in our people to set and reach personal and professional goals and we have some of the best mentoring minds in the business to help you do that. Because when you grow, we all grow.

McConnell Dowell actively seeks and celebrates diversity, inclusion, and individuality. In a culture low on ego and high on support, we encourage everyone to make an impact. We're big enough to take on community-shaping projects, but agile enough for you to have an influence on how we do things.

So, join us, be you, and help us create better together. Apply now!

This role is being sourced through McConnell Dowell directly and not accepting applications via external recruitment agencies.

About the role

McConnell Dowell is looking for a Site Engineer for one of our major infrastructure projects in Singapore.

Key Responsibilities

• Ensure the effective Engineering, Planning, Quality, Survey, Cost Control, and Scheduling functions for the project.
• Adherence to all requirements of the McConnell Dowell Project Execution Plan.
• Compliance with the Safety and Environmental Responsibilities (attached).
• Assisting Senior Project Engineer and Construction Manager with daily site activities.
• Monitoring/reporting site progress (direct employees and subcontract works).
• Formulation of procedures for construction activities.
• Interact with client personnel, and represent McConnell Dowell in a professional way.
• Attendance and contribution to prestart, internal, HSE, and client meetings.
• Adherence to all relevant legislation at work.
• Promotion of MCD Core Values and Safety Culture.

About You

• To be considered for this role, you will have;
• Degree in Civil or Structural engineering.
• 3 to 5 years of relevant on-site civil construction experience in RC works or similar.
• Preferably with local experience and knowledge in the civil infrastructure field.
• Good interpersonal and communication skills.
• Able to work on alternate 6 days work week.
• This is a short-term contract employment.

If you are interested in adding value and contributing success to building a key infrastructure project, we encourage you to apply for this exciting opportunity with McConnell Dowell.

About Us

McConnell Dowell – Creative Construction

Our purpose is Providing a Better Life. We do that through delivering projects that connect, support and sustain communities, and through providing career opportunities that challenge, reward and grow our people.

From remote major resources and energy projects to city-shaping transport and water infrastructure, we have constructed thousands of high-quality, complex projects for our customers and communities over more than 60 years, in Australia, New Zealand, the Pacific Islands and Southeast Asia.

Why join us?

The work you’ll do will have a tangible positive impact on people’s lives, including yours. The diversity of our projects, roles and locations means greater development opportunities. We invest in our people to set and reach personal and professional goals and we have some of the best mentoring minds in the business to help you do that. Because when you grow, we all grow.

McConnell Dowell actively seeks and celebrates diversity, inclusion, and individuality. In a culture low on ego and high on support, we encourage everyone to make an impact. We're big enough to take on community-shaping projects, but agile enough for you to have an influence on how we do things.

So, join us, be you, and help us create better together. Apply now!

This role is being sourced through McConnell Dowell directly and not accepting applications via external recruitment agencies.

About US

UTEC was first established in Singapore on 9 December 2014 and we specializes in civil and tunnel infrastructure construction works, with projects based locally and throughout Asia Pacific. The Company draws on the skills and expertise of its people to deliver tailored underground engineering solutions, striving to provide the best engineering solution and economics to its client. Since its establishment as a Contractor in underground works, the Company has been involved in projects not only in Singapore, but as far as India as well.

OUR VISION

Providing innovative, cost effective & sustainable solutions to underground works, bringing the best engineering solutions to our clients and all the stakeholders.

About This Role

1) Responsible for Estimating, Planning, Scheduling, Coordinating and Supervision to Setting-up, Installing & Maintenance of Following Equipment.

• TBM (Tunnel Boring Machine)
• STP (Slurry Treatment Plant)
• ECM
• Air Supply System
• Batching Plant
• Tunnel Ventilation System
• Temporary Communication System (RFID, Telephone, Fire Fighting, Gas Detector) Installation and Maintenance
• Locomotive
• Chiller Plant
• Gantry Crane
• Dewatering System
• Water Cooling Tower
• 22KV Sub-station

2) Responsible for Writing of Power ON Documents for TBM (Tunnel Boring Machine) and 22Kv Sub-station.

3) Planning of Power Distribution System for Bored Tunnel & Entire Site.

4) Maintenance and Troubleshooting of TBM, Electrical System, Locomotives, Batching Plant, Cooling Towers, and other Tunnel Facilities.

5) Estimation and Ordering Electrical Equipment, Spare Parts Based on Required Specification.

6) Preparation for TBM Initial Drive and Main Drive.

*This role is on 5.5 days workweek and work location is currently located at the East of Singapore (Changi area).

*More details of the role, company and benefit will be shared during the interview for shortlisted candidate.

These are our Featured Projects that we are Proud to show you:

SINGAPORE

1) PUB – Deep Tunnel Sewage System Contract T-11,

2) LTA – Thomson Line T206

OVERSEAS

1) INDIA - Mumbai Metro Line 3 – UGC07

2) MALAYSIA - Prasarana Malaysia Bhd – LRT3

3) HONG KONG - CEDD – Kai Tak Development Stage 3B

AND MORE ARE ONGOING AND COMING!

Requirements:

• Degree in Electrical engineering
• Minimum 2 to 5 years Electrical Installation experience in Greenfield projects.
• A self-starter with the ability to work independently, as well as in a team.
• Should be highly motivated and able to work under tight schedule.

Responsibilities:

• Plan and schedules works with reference to contractual schedules
• Coordinate goods delivery with suppliers and installations works with sub-contractors as required
• Attend to all operational matters related to the daily running of the project
• Liaise with customers/consultants/project managers concerning approval of plans and drawings, acceptance of work, progress of work, problem solving, etc.
• Attend site meetings and inspections, report regularly on progress and monitor project schedule
• Update As-Built Drawings
• Testing and Commissioning of the completed installations with Customers/Consultants/Sub-Contractors
• Co-ordinate with customers/consultants/project managers to handover completed project with O&M Manual.

DESCRIPTION

• Bid preparation and project execution for floating offshore ammonia and hydrogen production projects, FAPSO & OSS.
• Undertake FAPSO topside Electrical engineering design to comply with the client’s requirements.
• Participate in vendor development for auxiliary distribution, telecom, high voltage equipment.

DUTIES AND RESPONSIBILITIES

• Support senior engineers and project managers in delivering sound engineering solutions.
• Development of Basis of Design for Electrical discipline.
• Development of load list, single line diagrams, specifications and other documents as required for execution of the project.
• Ensure that technical compliance with all design requirements.
• Use engineering software for modelling and analysis.
• Produce technical documents, reports and presentations detailing the findings of investigations under the guidance of Project Engineer or Engineering Manager.
• Coordinate with Engineering Contractor, Shipyard and Supplier Electrical discipline team to review the deliverables.
• Field engineering support during construction phase of the project.
• Commissioning and start-up support.
• Achieve safety standards as defined in project requirements
• Assist in preparation for bid submission to client, with compliant technical documentation.
• Assist in preparation for request for quotations, and evaluation of bids submitted by Suppliers.
• Attend technical meetings, and minutes down the meeting, if required.
• Keep track of relevant discipline tasks.
• Comply with environmental impact assessment and safety-related design requirements.
• Documentation in accordance with Company’s quality management system.
• Responsible for personal safety, safe working practices, and understand and follow HSE procedures.
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Bachelor or Master of Engineering Degree (Electrical or related disciplines).
• 0 – 2 years’ experience. Knowledge or experience in maritime and offshore services will be advantageous.
• Aptitude and attitude to learn and experience marine engineering requirements, software tools, and other technical issues.
• Working knowledge of Microsoft Word and Excel are required.
• Previous use of AutoCAD or other 2D / 3D software will be advantageous.

PROFESSIONAL DEVELOPMENT

• Receive on-the-job training and mentorship from experienced engineers to develop your skills and knowledge.
• Opportunities for career advancement as you gain experience and demonstrate your abilities.
• Support for obtaining professional certifications.

Only Singaporeans & PRs need apply.

Business Development Manager Job brief

We are looking for an ambitious and energetic Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy.

The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Manager Responsibilities

• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople

· Developing goals for the development team and business growth and ensuring they are met.

· Training personnel and helping team members develop their skills.

• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Business Development Manager Requirements and skills

• Proven working experience as a business development manager, sales executive or a relevant role
• Proven sales track record
• Experience in customer support is a plus
• Proficiency in MS Office and CRM software (e.g. Salesforce)
• Proficiency in English
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• BSc/BA in business administration, sales or relevant field
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Business Development Manager Job brief

We are looking for an ambitious and energetic Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy.

The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Manager Responsibilities

• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople
• · Developing goals for the development team and business growth and ensuring they are met.
• · Training personnel and helping team members develop their skills.
• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Business Development Manager Requirements and skills

• Proven working experience as a business development manager, sales executive or a relevant role
• Proven sales track record
• Experience in customer support is a plus
• Proficiency in MS Office and CRM software (e.g. Salesforce)
• Proficiency in English
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• BSc/BA in business administration, sales or relevant field
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Business Development Director (in supply chain, logistics), Key Responsibilities is:-

1. Sales Strategy & Planning:
   • Develop and implement sales strategies to meet the company’s revenue and growth targets.
   • Identify and capitalize on new business opportunities within the supply chain sector.
   • Analyze market trends, competition, and customer needs to refine strategies.
2. Team Leadership:
   • Lead and manage a sales team, including recruitment, training, performance management, and coaching.
   • Set clear performance objectives and ensure the team meets sales quotas.
   • Foster a high-performance culture and provide ongoing development opportunities for team members.
3. Client & Relationship Management:
   • Build and maintain strong relationships with key clients, suppliers, and partners.
   • Ensure client satisfaction through effective communication and tailored solutions.
   • Oversee the negotiation of large, complex deals, and contracts.
4. Revenue Growth & Business Development:
   • Drive revenue growth by expanding the customer base and entering new markets.
   • Develop partnerships and collaborations with other stakeholders in the supply chain network.
   • Explore opportunities to cross-sell or up-sell products and services.
5. Operational & Financial Management:
   • Set and manage sales budgets, forecasts, and financial targets.
   • Monitor sales performance, including tracking KPIs and using data to inform decision-making.
   • Collaborate with other departments (such as operations, logistics, and procurement) to ensure seamless customer service delivery.
6. Market Intelligence & Innovation:
   • Keep abreast of industry developments, regulations, and emerging technologies that could impact the supply chain business.
   • Adapt and innovate sales processes to improve efficiency and client engagement.
   • Lead efforts to digitize or streamline sales and operational processes when appropriate.
7. Collaboration with Senior Management:
   • Work closely with the executive team to align sales goals with the company's overall strategy.
   • Present regular sales reports and forecasts to the board or senior management.

Key Skills & Qualifications: :

• Experience: At least 10 years of sales experience, with 8+ years in a leadership role within the supply chain, logistics, or transportation industry specialisation in India Market
• Leadership Skills: Proven ability to lead, inspire, and manage a large sales team.
• Analytical Skills: Strong understanding of market analysis, sales forecasting, and financial metrics.
• Communication: Excellent communication and negotiation skills to handle high-level relationships and deals.
• Strategic Thinking: Ability to develop and implement long-term sales strategies.
• Results-Oriented: Proven track record of meeting and exceeding sales targets.

Working Venue - Pasir Panjang

Operates between B2B and B2C

Account Servicing Manager work together with General Manager to maintain client relationships, to identify and open new opportunity to achieve profitable sales.

Besides handling cliental, Account Service Manager needs to work with and serve our corporate and franchise-run retail and/or F&B outlets as customers.

Job Scope

· Communicate with clients to meet their needs

· Build trust with clients

· Sales negotiations

· Sales analysis

· Work cross functionally with the relevant internal teams to ensure customer needs are being met

· Research and observe customer behaviour to make improvements

· Competitor analysis

· Business development and leads nurturing

As aSoftware Engineer, you are accountable for:

· Be part of the Security Development team to build innovative Security solutions for Homeland Security, Smart Cities and Critical Infrastructures.

· Be responsible for the technical/solution designs, code development, and component test execution to demonstrate alignment to the product/functional specification of the solution.

· Develop and demonstrate a broad set of technology skills in web application technologies, micro service design patterns, Open Source libraries and frameworks, and technology architecture concepts.

· Collaborate with product/solution architects to create, implement and maintain the product/solution development roadmap.

· Be the main contact point to represent the team, join agile ceremonies and communicate effectively with other development teams and product management team.

· Ensure all work adheres to Thales software development methodologies and processes

· Thoroughly document design to ensure the usability, supportability and maintainability of the developed

· Perform sub-system installation, configuration and integration to support Proof-Of-Concept (POC)/demo.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Experience required:

· 3+ years of hands-on experience of full web application development lifecycle of scalable micro-services-based architectures; including tools, best practices, continuous deployment, dependency/complexity management, scale/performance tuning, monitoring, resiliency, etc.

· Experience in SCRUM/Agile software development methodologies

· Strong knowledge of architectural styles and design patterns is good-to-have

Programming languages/frameworks/Technologies:

· Proficiency in Go Language, various Go frameworks and tools

· Proficiency in building responsive layouts with CSS and HTML5

· Proficiency in building complex Angular applications with Typescript

· Experience with Android (Kotlin)

· Familiar with database technologies such as Postgresql and ClickHouse

· Familiar with MQ and Apache Kafka

· Unit-test code for robustness, including edge cases, usability, and general reliability

· Strong knowledge in version control using GIT

· Maintain the CI/CD pipeline and familiar with Kubernetes. Knowledge about Ansible is good-to-have.

· Knowledge about Mapbox SDK (Android or iOS) is good-to-have.

Behaviour:

· Good communication skills and team-works

· Analytical and problem-solving skills

As aSoftware Engineer, you are accountable for:

· Be part of the Security Development team to build innovative Security solutions for Homeland Security, Smart Cities and Critical Infrastructures.

· Be responsible for the technical/solution designs, code development, and component test execution to demonstrate alignment to the product/functional specification of the solution.

· Develop and demonstrate a broad set of technology skills in web application technologies, micro service design patterns, Open Source libraries and frameworks, and technology architecture concepts.

· Collaborate with product/solution architects to create, implement and maintain the product/solution development roadmap.

· Be the main contact point to represent the team, join agile ceremonies and communicate effectively with other development teams and product management team.

· Ensure all work adheres to Thales software development methodologies and processes

· Thoroughly document design to ensure the usability, supportability and maintainability of the developed

· Perform sub-system installation, configuration and integration to support Proof-Of-Concept (POC)/demo.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Experience required:

· 3+ years of hands-on experience of full web application development lifecycle of scalable micro-services-based architectures; including tools, best practices, continuous deployment, dependency/complexity management, scale/performance tuning, monitoring, resiliency, etc.

· Experience in SCRUM/Agile software development methodologies

· Strong knowledge of architectural styles and design patterns is good-to-have

Programming languages/frameworks/Technologies:

· Proficiency in Go Language, various Go frameworks and tools

· Proficiency in building responsive layouts with CSS and HTML5

· Proficiency in building complex Angular applications with Typescript

· Experience with Android (Kotlin)

· Familiar with database technologies such as Postgresql and ClickHouse

· Familiar with MQ and Apache Kafka

· Unit-test code for robustness, including edge cases, usability, and general reliability

· Strong knowledge in version control using GIT

· Maintain the CI/CD pipeline and familiar with Kubernetes. Knowledge about Ansible is good-to-have.

· Knowledge about Mapbox SDK (Android or iOS) is good-to-have.

Behaviour:

· Good communication skills and team-works

· Analytical and problem-solving skills

Responsibilities:

• Research, design, and develop computer and network software or specialised utility programs.
• Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.
• Collaborate with the team to create technical designs for frontend architectures using React and React Native.
• Develop and maintain frontend components and features for our main products.
• Participate in the development of management platforms related to marketing activities.
• Optimize frontend performance and implement server-side rendering techniques.
• Contribute to the improvement of development processes and coding standards.
• Stay up to date with the latest frontend technologies and best practices.

Requirements:

• Bachelor's in Computer Science, Engineering or a related field
• Minimum 5 years of experience in Frontend Engineering.
• Experience in React or React Native.
• Experience with frontend performance optimization and server-side rendering.
• Familiarity with build tools like Webpack and Vite.
• Knowledge of Node.js and CSS.
• Excellent problem-solving and debugging skills.
• Strong attention to detail and ability to deliver high-quality code.
• Good communication and collaboration skills.
• Passion for staying up to date with the latest frontend technologies and trends.

DESCRIPTION

• Bid preparation and project execution for floating offshore ammonia and hydrogen production projects, FAPSO & OSS.
• Assist in mechanical engineering support to ensure mechanical process equipment is designed, installed, operated and maintained to achieve maximum life of the equipment.
• Undertake FAPSO topside Mechanical engineering design to comply with the client’s requirements.
• Participate in vendor development for auxiliary distribution, telecom, high voltage equipment.

DUTIES AND RESPONSIBILITIES

• Support senior engineers and project managers in delivering sound engineering solutions.
• Assist in the design and development of mechanical systems, components, and equipment, ensuring adherence to project requirements, industry standards, and safety regulations.
• Collaborate with senior engineers to conduct technical analysis, testing, and troubleshooting of mechanical systems.
• Ensure that technical compliance with all design requirements.
• Use engineering software for modelling and analysis.
• Produce technical documents, reports and presentations detailing the findings of investigations under the guidance of Project Engineer or Engineering Manager.
• Coordinate with Engineering Contractor, Shipyard and Supplier Electrical discipline team to review the deliverables.
• Field engineering support during construction phase of the project.
• Commissioning and start-up support.
• Achieve safety standards as defined in project requirements
• Assist in preparation for bid submission to client, with compliant technical documentation.
• Assist in preparation for request for quotations, and evaluation of bids submitted by Suppliers.
• Attend technical meetings, and minutes down the meeting, if required.
• Keep track of relevant discipline tasks.
• Comply with environmental impact assessment and safety-related design requirements.
• Documentation in accordance with Company’s quality management system.
• Responsible for personal safety, safe working practices, and understand and follow HSE procedures.
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Bachelor or Master of Engineering Degree (Mechanical or related disciplines).
• 0 – 2 years’ experience. Knowledge or experience in maritime and offshore services will be advantageous.
• Aptitude and attitude to learn and experience marine engineering requirements, software tools, and other technical issues.
• Working knowledge of Microsoft Word and Excel are required.
• Previous use of AutoCAD or other 2D / 3D software will be advantageous.

PROFESSIONAL DEVELOPMENT

• Receive on-the-job training and mentorship from experienced engineers to develop your skills and knowledge.
• Opportunities for career advancement as you gain experience and demonstrate your abilities.
• Support for obtaining professional certifications.

Only Singaporeans & PRs need apply.

At the forefront of integrated photonics, we are a passionate team focused on accelerating the advancement of photonic integrated circuit (PIC) technology. We build prober machines that make PIC testing accessible for R&D and scalable for large-scale production through our advanced automation technology. If you want to be part of this mission, read on.

We need a Senior/Lead Software Engineer who’s ready to pour heart and mind into creating something truly extraordinary.

Key Responsibilities:

• Refine and streamline the existing automaton software of the prober machine

• Develop software to support automated PIC testing technology, enabling rapid testing and mass production.

• Write clear and concise documentation, including user manuals and technical specifications.

• Collaborate with cross-functional teams, including hardware and test engineers, to ensure seamless integration between software and hardware systems.

Qualifications:

• Proven experience in software development, ideally with NET Core, C#, WPF, C++.

• Familiarity with databases such as MySQL.

• Proficiency in data analytics using Python.

• Knowledge of automation systems, equipment control, or related technical fields is a plus.

• A strong sense of curiosity and resourcefulness in learning new technologies and solving complex challenges.

• Attention to detail – from code quality to functionality and user interface.

• A relentless commitment to excellence – "good enough" isn’t part of your approach.

• The ability to clearly explain software architecture and technical details to management.

Why Join Us:

• Be part of a mission-driven team at the cutting edge of integrated photonics.

• Contribute to building revolutionary solutions that drive the growth of the PIC industry.

• Opportunity to work in a startup environment, where your ideas and contributions can make a real impact.

• Gain hands-on experience with software, data analysis, and hardware integration.

• Take pride in solving challenging problems and delivering solutions that fuel innovations.

Why This Matters: At the heart of innovation lies a relentless drive to push boundaries. We’re not just developing software or building machines; we’re creating the critical tools that will shape the future of photonic integrated circuits (PICs) and the technologies they enable. Testing is one of the biggest bottlenecks in the PIC industry, and through innovations and automation, we are breaking down those barriers, accelerating progress, and fuelling industrial growth. If you’re ready to contribute to something bigger, join us in this mission. We’re not aiming for good—we’re committed to building something truly transformative.

Position Summary:

The Network Engineer supports and maintains infrastructure operations; monitors infrastructure performance and resolution of technical problems. He/She leads high impact projects, prioritises and assigns tasks to ensure that team’s resources are used effectively and that infrastructure projects are implemented in accordance with plans and budgets. Able to identify and resolve highly complex or specialised issues that may require the establishment of new techniques and processes. Anticipates internal and/or external business challenges and/or regulatory issues; recommends improvements. He/She is required to be on standby with on-call availability with varied shifts including nights, weekends and holidays.

Ability to apply a critical and analytical approach to resolving technical problems and works well with the team and is able to guide them to ensure infrastructure projects are well implemented.

Roles & Responsibilities:

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• Bachelor in Computer Engineering or relevant

• At least 5-6 years' of experience in the Network Management and Support Services.
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Previous working experience in Network Support in the areas of wireless, wired, and VPN.

• Relevant Network certifications such as CCNE or CCNA is desired.

The lead Bioinformatics Field Engineer is responsible for supporting and maintaining the bioinformatics software and hardware stacks that are used in the clinical laboratory to process patient samples using Guardant Health’s digital sequencing technology. In addition, they provide bioinformatic technical support to clinical teams, helping them to troubleshoot and interpret bioinformatics pipeline results to enroll advanced cancer patients in clinical trials and help physicians identify the right treatment options for their patients.

Essential Duties and Responsibilities

• Support the CLIA/CAP accredited clinical laboratory by providing subject matter expertise in the software, hardware and result outputs of Guardant Health’s bioinformatic pipelines.
• Support and maintain the software applications that make up the bioinformatics software system.
• Work with technical teams to install new software, software upgrades and/or products for use in the clinical laboratory.
• Perform troubleshooting and/or root cause analysis of potential issues with Guardant Health’s cfDNA workflow(s) and maintain ownership through resolution.
• Perform troubleshooting of computational hardware, storage and Guardant Health’s high performance computing stack.
• Provide bioinformatic technical support to clinical operators, including reviewing and interpreting bioinformatic pipeline outputs and assisting clinicians with NGS result reporting.
• Develop training and troubleshooting material for support workflow(s) and bioinformatic pipeline result interpretation.
• Any other duties the Employee may be instructed to carry out by the board of directors from time to time that are reasonably within the scope of the Employee’s job position and work capabilities.

Qualifications and Requirements

• M.S. in Bioinformatics, Computational Biology, Computer Science or related field + 6 years of industry experience OR PhD in Bioinformatics, Computational Biology, Computer Science or related field experience + 3 years of industry experience.
• This position requires a candidate that is strong in root cause analysis, application support and complex clinical facing interactions.
• The candidate should have:

1. Hands-on experience running and troubleshooting bioinformatic pipelines used in cfDNA and/or NGS assays, including result review and interpretation.
2. Strong understanding of Python and Bash scripting, as well as comfortable working in a Linux shell environment, such as interacting with applications and tools through the terminal interface.
3. Working knowledge of Django, Django Restful Framework (DRF) and managing and deploying Docker (or other virtualization technologies).
4. Experience working with a relational database, preferably PostgreSQL.
5. Experience in clinical genomic applications, is detail-orientated and customer-focused.
6. Work environment: Employee may be required to lift routine office supplies and use office equipment, as well as potentially lift computing equipment. Majority of work is performed in a desk/office environment; however, there may be exposure to high noise levels, fumes, and biohazard material in the laboratory environment. Ability to sit for extended periods of time.

Job Description:

Be part of an exciting Team working on cutting-edge advanced packaging process technologies. Partner and work with various FAB users, to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to make sure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, and professional individual.
• Oversee the Team spare/ chemicals / inventories stores – upkeep with good house-keepings, periodic cycle counts. Maintain the inventory database, ensuring timely and accurate recordings, raise purchase requests accordingly.
• Take charge and provide day to day supports in all logistics needs and initiate material/spare parts procurement when required to ensure smooth Fab operations.
• Accountable for the inventory movements required to enable smooth lot operations across IME Premises.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time.
• Work seamlessly with various stakeholders to provide logistics support and deliver inventory on time.
• Work towards and employ critical thinking, put-up good initiatives to move forward to digitalization.
• Ability to work in a multi-task environment.

Experience:

• Education: Diploma in engineering discipline. Preferably in supply chain logistic/ warehouse operations.
• At least 2 years of warehouse operations.
• Preferably some experience in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.
• Strong knowledge-based on excel skills and some knowledge of supply chain analytics.