Position Responsibilities:

• To manage and be responsible for site automation system including ABB 800xa system and control builder programming and Schneider quantum proworx 32 programming, industrial network design and maintenance, Mware and server/workstation and Fix32 database and graphics design/MES/DCS/SCADA/PLC as well as label applicator and ABB Robotic palletizer machine.
• Carry out automation and control implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget and qualification of facilities in accordance with site to approved procedures.
• Provide specialized advice to other sections and subordinates for trouble shooting/continuous improvement to process/systems.
• Monitor and enforce compliance measures (including safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Supervise, develop and motivate junior staff to help realize their maximum potential to contribute towards achieving objectives of the department.
• Contribute to the development of the annual operating budget of the section to ensure achievement operational targets of section.
• Responsible for planning and implementing plant automation maintenance, managing of engineering resources during maintenance plan schedule and prompt resolution of breakdowns, including engaging external assistance.
• To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.
• Monitor and manage the defined automation system to ensure constant and reliable automation control to the plant to minimize disruption to the production process.
• To support customer complaints and deviation investigations to ensure that all relevant engineering corrective actions are completed within the agreed timeline.

To be successful in the role, the incumbent should have the following qualities:

• Good honours degree in the relevant engineering discipline
• At least 3 years of relevant experience in the process/food industry
• PLC (ABB 800xA, Scheider and Siemens)
• Basic awareness of industrial standards
• Good understanding of local codes and requirements
• Hold work experience in Microsoft Windows
• Good knowledge in Control systems both in maintenance and plant commissioning.

Note: This job description is not intended to be all-inclusive. Employees may perform other related duties as negotiated to meet the ongoing needs of the organization.

IPS has an immediate need for a talented Engineer (Electrical) to join our industry leading team at our Singaporeoffice.

The Engineer/Senior Engineer works independently on various Bio-Pharmaceutical/Industrial projects as assigned by a Project Manager and acts as Lead Electrical Engineer. The Lead Electrical Engineer position focuses on Electrical engineering and design and will report to the Engineering Project Manager and interface with other discipline engineers as required.

This position will play a role in the entire design process including but not limited to preliminary assessments, concept design, basic design, detailed design, site support, problem resolution, and customer & vendor accessibility. The Engineer/Senior Engineer may have to work on several concurrent projects and at times may assist as a technical expert on a specialized design.

Job Duties and Responsibilities:

· Reviewing and monitoring all Electrical/ELV System deliverables

· Developing HV, MV, LV & ELV System design Calculations, Load Studies, drawings, Specifications, data sheets, Cable Schedules, Scope of works, MTOs and 3D Models, and utilizing Industry sector and safety best-practices.

· Conversant with all Electrical and ELV systems design involved in Pharmaceutical, Petrochemical, Industrial Projects/plants.

· Knowledge of Singapore codes/standards for HVAC/Fire Protection and Sanitary/Plumbing Systems

· Reviewing, monitoring, and ensuring compliance requirements are met for design and (e.g. Standards, specification and local codes and regulations etc.)

· Coordinating with other engineering and design discipline team members

· Developing, Drawings, Documents, Plans/Sections etc.

· Developing Electrical/ELV System SLDs, Schematics, Cable Tray Plans/Sections etc.

· Review/Prepare 2D AutoCAD Design Drawings.

· Review/Prepare 3D Model using Revit, AutoPlant, BIM or similar software and extract design drawings from these models.

· Develop coordinated services drawings with other disciplines

· Responding to reports and requests for information

· Reviewing stamped and finalized drawings (including piping plans and sections, piping

· Ensuring engineering, design quality, and technical accuracy of drawings, 3D models, material quantities, specifications, procedures

· Prepare demolition layouts/schematics, tie-in requirements and translate into drawings.

· Develops design concepts, prepares documents during various stages of design. Corrects and updates design documents. Develops solutions to design problems.

· Initiates squad inter-discipline squad checks and squad checks with client (when necessary) prior to issue of drawings at various stages of project.

· Works with equipment suppliers/vendors to obtain the necessary information needed for design completion. Interacts with clients regularly to secure scope and design intent.

· Ensure acceptable levels of quality and checks for coordination of work to assure documents reflect design intent and necessary coordination.

· Coordinates design work with related engineering disciplines. Attends job and construction meetings, site walks, liaise with M&E contractor and participate in the coordination of the M&E work with other disciplines.

· Contributes to annual performance reviews, assist in educating and development of assigned design staff and acts as resource for design questions.

· Having analytical thinking skills.

· Being ethical and trustworthy.

· Having good CAD knowledge.

· Being flexible.

· Having good written and verbal communication skills.

· Being able to motivate others.

· Having Requisite IT skills.

· Being able to work with a team.

· Having problem solving skills.

· Being able to maintain good business relationships.

Qualifications & Requirements:

· Minimum 8 years experience in design office preferably with consultant/contractor in engineering field, preferably with EPCM/EPC experience.

· Engineering Degree/Diploma from an accredited technical institution.

· Experience with Electrical/ELV systems Design (e.g. Biopharma/Clean Industrial systems’ Projects, Hazardous Area Classifications etc.)

· Must be proficient in the use of CAD and 3D modeling design.

· Has a demonstrated ability to lead Technical Design for Electrical/ELV Systems on Large Industrial Projects, Develop/manage Engineering Deliverables, problem solving, communicate effectively to all key personnel, and time management.

RESPONSIBILITIES

• Be part of the site team to perform engineering design, project management and oversee drawing management, and control of technical documentation;
• Good knowledge of Singapore Building Regulations and codes, design development & detailing;
• To assist Project Manager for site planning, coordination, supervision, monitoring and inspections
• To ensure site activities are executed in full compliance with technical specification and approved drawings within project budget and schedule;
• To liaise with authorities, consultants and subcontractors for technical submittal and approval;
• To adhere to construction procedures and safe work practices;
• To ensure efficient control and use of manpower, equipment and materials onsite without wastage;
• Others ad-hoc related duties as assigned.

Requirements:

• Possess a Bachelor Degree in Civil Engineering duly recognised by Professional Engineer Board of Singapore and accepted universities within the BCA listing.
• At least 3 years in relevant working experience in local construction industry;
• Self-motivated, independent and good interpersonal & communication skills

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

• Take instruction from/assist reporting to superior.
• Produce sketch drawings.
• Set design criteria , check design calculation and drawings.
• Assist in technical proposals.
• Check documentation complies with design criteria/Client brief/Approved concept/Standard.
• Liaise/attend clients, architects and site meetings.
• Maintain and check for completeness record, etc.
• Resolve any technical problems faced during the project design and/or construction stages.
• Other ad-hoc assigned by Director.
• At least 5 years of working experience in the construction industry.
• Candidate must possess a least bachelor's degree/post graduate diplima/professional degree in Engineering Mechanical or equvalent.
• Relevant project experience in HVAC/ACMV/MEP system both in design and project management.
• Strong knowledge of M&E installation, current practices, code and authorities requirement.
• Knowledge in ACMV product R&D preferred.
• Knowledge in Auto Cad and BIM preferred.

About Seagate Technology:

Seagate is the leader of mass data storage solution that helps the world store more data and harness its potential with breakthrough cloud storage services, systems, hard drives, solid state drives and many more.

About our group:

Equipment Development Engineering group, EDE in short, is an automated equipment development team that design and develop high precision automated machines that incorporate vision guidance capabilities and inspection. Our vision is to deliver intelligent automated manufacturing equipment solutions to factories through continuous innovation and challenging the impossible mindset. We strive to include IOT, AI, machine learning, data harvesting and data analytics solutions in our development roadmap with the goal of realizing smart manufacturing plant in the near future.

EDE has managed to win a wide spectrum of innovation awards and patents on international and internal corporate scene through best-in-class design. Our team consists of aspiring individuals who specialize in mechanical, embedded system, electrical, software, vision, or multiple disciplines and the good news is we are expanding! We are seeking awesome control engineer to join and thrive in our family. We embrace motivated individual who is a team player and able to work independently. When you join Seagate, you become a vital part of our mission to help safeguard humanity’s prized data. You will learn and help us develop new technologies as part of this quest. Your professional growth is our priority.

About the role:

• Develop control software for precision and high-throughput automated equipment.
• Develop electrical design for automated machine with the assistance of draftsman in creating schematic drawings and BOM creation.
• Collaborate with cross-functional teams to gather requirements, design system architectures, and implement software solutions.
• Implement best practices for software development, including code reviews, testing, and documentation.
• Support and troubleshoot existing automation systems, identifying and resolving technical issues in a timely manner.
• Stay updated on industry trends and emerging technologies to drive innovation and continuous improvement in automation software solutions.
• Perform continuous improvement and enhancement to the existing equipment software toward Smart Autonomous Manufacturing.

About you:

• Self-motivated and eagerness to learn more.
• A positive mindset with a can-do attitude to challenge the impossible.
• A good team player with the ability to work independently.
• Good organizational and time management skills.
• Able to work remotely in an effective manner.
• Might need to travel.

Your Qualification:

• Bachelor’s or Master’s Degree in Electrical and Electronics Engineering, Computer Engineering, or other equivalent disciplines.

Your experience includes:

• VB6, C# and/or C++ OOP and multi-threading PC based software programming.
• Experience in electrical design for machine automation in Class100 cleanroom environment will be very much preferred though not compulsory.
• Knowledge and/or experience in machine vision technology, AI technology, SolidWorks 3D or control automation will be an added advantage.

Responsibilities:

• Ideate, prioritize, and define requirements based on market and customer insights.
• Analyze trends, assess technology, and generate product concepts.
• Define competitive positioning and USP.
• Execute NPD plan within timelines, aligning Scrum teams via Agile.
• Source manufacturers, liaise with formulators, and ensure regulatory compliance.
• Conduct efficacy, safety, and stability tests with manufacturers.
• Finalize product specs, labels, and packaging with relevant teams.
• Research pricing, create costing data, and present to management.
• Provide technical support to Marketing and conduct product training.
• Monitor industry trends, competitor actions, and product performance.
• Manage product improvements and corrective actions with manufacturers.
• Ensure compliance with standards and support company goals with additional projects.

Requirements:

• Degree in Nutrition/ Chemistry/Pharmacy or equivalents.
• Minimum 1 year of experience in product development or management within dietary supplements or health food.
• Proficient in product/project management, with strong planning and time management skills.
• Resourceful, analytical, and effective at problem-solving.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are seeking an exceptionally skilled and detail-oriented NDT

Systems Engineer to join our team. This role demands extensive

expertise in advanced NDT methods, system design, programmin

and hands-on testing. The ideal candidate will have a proven trac

record in operating and programming advanced NDT equipment,

including PAUT, ToFD, DRT, ECT, and ACFM, and will possess

advanced skills in software and mechanical design.

1. Advanced NDT Equipment Handling:

Phased Array Ultrasonic Testing (PAUT): Operate PAU

systems, including setting up and calibrating equipment

configuring probe arrays, and conducting complex

inspections on various materials.

Direct Radiography Testing (DRT): Execute DRT

procedures, including optimizing exposure parameters,

interpreting radiographic images, and ensuring complia

with safety and quality standards.

Eddy Current Testing (ECT): Perform ECT for detecting

surface and near-surface flaws, including setting up test

parameters and analyzing signals.

Alternating Current Field Measurement (ACFM): Utili

ACFM to detect and size surface-breaking defects, includ

setting up equipment and interpreting measurement da

2. System Design and Programming:

Automatic Immersion Systems: Design, program, and

implement automated immersion systems for ultrasoni

testing. This includes developing custom software soluti

and integrating with hardware components.

Software Simulation: Use CIVA software to simulate an

model NDT scenarios, optimizing test setups and predic

inspection outcomes.

Equipment Programming: Develop and troubleshoot

custom programming for ultrasonic testing equipment,

including creating scripts for specific test procedures an

automating test sequences.

3.Technical Skills:

CIVA Software:

Advanced knowledge of CIVA software fNDT simulation and modeling.

SolidWorks and AutoCAD:

Proficient in SolidWorks formechanical design and AutoCAD for technical drawing.

Programming Skills:

Experienced in programmingultrasonic testing equipment, including creating customscripts and automation solutions.

4.Personal Qualities:

Initiative and Hardworking:

Self-driven with a strong wethic, capable of working independently and managing pressures.

Analytical Skills:

Excellent analytical and problem-solviabilities, with a keen eye for detail and precision.

5.Consulting and Solutions:

Offer expert consulting services to addresscomplex NDT challenges, providing tailored solutions baon client requirements and industry standards.

Problem Solving:

Analyze and resolve technical issuesrelated to NDT processes, equipment, and systemintegration.

6.Travel Requirements:

Regional Travel:

Travel to various international locationincluding the Middle East (Saudi Arabia, UAE, Oman, Qaand Asia (Singapore, Malaysia, Indonesia, Thailand,Bangladesh, India) for project assignments.

Adaptability:

Adapt to diverse working environments,including offshore and onshore sites, and handle projecdemands with flexibility.

Application Instructions:

Interested candidates should submit a detailed resume outlitheir qualifications, experience, and relevant certifications.

Please include a cover letter addressing how your skills andexperiences align with the responsibilities and requirementsoutlined above.

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Summary of the Job:

· Responsible for mechanical design tasks of given project and ensure delivery of the machine according to customer requirements.

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 2 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Responsibilities:

• Arranges necessary facilities and instruments for jobs such as meters, test kits, temporary preparations, shore generators, and load banks
• Performs testing and commissioning activities and ensures that proper documentations are approved and signed
• Supervises and deploys manpower to execute the operational tasks
• Ensures that electrical equipment and switchboards meet the purchase specifications, and arranges for protection and maintenance of the electrical system
• Reviews commissioning work processes to enhance efficiency and productivity
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department and vendors
• Plans and schedules the testing and commissioning requirements based on project basis, and organises all logistics requirements for major operations
• Performs any other assigned duties and responsibilities

Requirement

• Diploma in Electrical Engineering or related Engineering Disciplines
• Min. 4 years of related work experience working on FPSOs
• Possess working experience related to testing of LV/ MV Switchboards, power generators, DCS / ICSS interface for PMS system
• Capable of testing and calibration of Electrical switchboard and its components, troubleshooting and clear understanding of system specification and class requirements
• Familiar with the testing procedures and applicable rules and regulations of regulatory bodies
• Familiar with test memos and manuals

Our Addresses:

Seatrium - Admiralty Yard

Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Seatrium Limited - Tuas Yard

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Our Working Hours:

Mon - Thu: 8:00 am - 5:15 pm

Fri: 8:00 am - 4:30 pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

OB DESCRIPTION

Job Title

Quality & HSE Engineer

Occupation

QUALITY CONTROL ENGINEER

Job Description & Requirements

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Purpose:

Responsible for performing the final inspection of assembly products to meet Customer's quality standards.

Key Area of Responsibilities:

· Perform In-process and Final Inspection for assembly tools and loose assembly modules to meet the requirement as defined on drawing, WI and any related documents.

· Initiate Material Review Board (MRB) review when part or assembly is not according to requirement as defined on drawing, WI and any related documents during in-process inspection.

· Update outgoing inspection record after Final Inspection to allow monitoring of the internal quality.

· Raise Non-Conformance Report (NCR) for non-conformance found to ensure reject is recorded.

· Support and participate in company continuous improvement program.

Qualification & Experiences:

· Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course

· Preferably with Workplace safety & health in Metal work certification

· Knowledge on quality inspection and buyoff

· No experience are welcome

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

• Provide performance and process expertise and operational excellence in Energy & Utilities assets (Cogen Power plant, Demin Water and Steam production, Boiler etc) management to ensure good plant availability, reliability and optimization.

Key Roles and Responsibilities

• Carry out plant performance monitoring, troubleshooting and optimization for Energy & Utilities assets (Combine Cycle Power Plants, Utilities Plants, Energy from Waste Plant, Wood Chip Boiler etc) to ensure good plant availability, reliability and optimization.
• Establish and continuous improve the monitoring matrix to enable detection of short term and long term process and performance abnormality. Work closely with O&M team to address the issues.
• Carry out quarterly performance test for power plants with operation team. Lead the performance test data analysis, identify the gap and improvement area, recommend the actions for rectification and follow through the implementation for closure.
• Monitor the plant water chemistry, and recommend the actions to be taken for process adjustment such as boiler blowdown control, and chemical injection etc.
• Establish, improve and monitor the plant and system mass balance (heat, material, and water etc), identify the abnormality such as leaks, uncounted loss, meter/instrument inaccuracy, and efficiency deterioration etc. Lead and coordinate other stakeholders to rectify the issues.
• Carry out quarterly performance test for power plants with operation team. Lead the performance test data analysis, identify the gap and improvement area, recommend the actions for rectification and follow through the implementation for closure.
• Monitor the plant water chemistry, and recommend the actions to be taken for process adjustment such as boiler blowdown control, and chemical injection etc.
• Establish, improve and monitor the plant and system mass balance (heat, material, and water etc), identify the abnormality such as leaks, uncounted loss, meter/instrument inaccuracy, and efficiency deterioration etc. Lead and coordinate other stakeholders to rectify the issues.
• Keep track of the GHG emission intensity of the assets to achieve sustainability goals.
• Provide technical expertise in the optimization initiative conceptualization and implementation. Keep track of the performance and cost savings benefits qualification and post implementation review of optimization initiatives.
• Provide technical and operation insight to support in plant improvement projects and new energy and utilities project including process engineering review, calculations for mass/energy balances, equipment sizing, key equipment selection, material compatibility considerations and other duties assigned for process and engineering evaluation.
• Support performance manager for any other assigned work.

Qualifications & Experience

• Degrees in mechanical engineering/chemical engineering
• Minimum 5-10 years’ experience in power/utilities plant operation, performance monitoring or process engineering
• Process expertise in energy from waste sector and/or power plant water chemistry experience will be an advantage

Preferred Skills & Characteristics

• Organized and detail oriented
• Strong in problem solving and root cause analysis
• Willing to learn and proactive in keeping up with new technologies for solutions of plant optimization.
• Good Team player and able to deliver results within tight deadlines
• Independent with initiatives, resourceful and positive altitude
• Strong interpersonal, communication and presentation skills

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• AWS & performance bonus
• Staff incentive
• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

BASIC FUNCTIONS

Collaborate with Business Unit to strive for anticipated sales growth targets as well as to breach new markets to ensure captive market share year on year. Develop effective strategies and plans to increase spare parts market share and revenue.

SPECIFIC RESPONSIBILITIES

• Proactively handles all opportunities from leads to ensure timely fulfilment and profitability of business unit
• Conducts and provides accurate forecast and sales pipeline plans to management for planning
• Actively promotes Service Sales (Aftermarket products) to distributors in conjunction with spare parts sales
• Collaborates with the sales team to develop sales strategies to target new opportunities recognized within existing accounts
• Collaborates with the sales team to develop sales strategies to target new opportunities recognized within existing accounts
• Have in-depth knowledge on wide range of diesel industrial engines (small to large capacity) to provide support to distributors in terms of spare parts technical advice
• Optimizes inventory level (own stock and consignment stock at customer site) to achieve low stock-up cost and satisfactory parts availability to customers
• Maintains accurate records of all projects, pricings, sales, and activity reports
• Creates and conducts proposal presentations for sales representatives, customers, and prospects
• Leads and participates in continuous improvement projects in cross-functional areas
• Performs any other parts sales and aftermarket duties as and when assigned

QUALIFICATIONS / REQUIREMENTS

• Diploma/degree in Mechanical or Electrical Engineering with at least 3 years of relevant experience, preferably in spare parts or automotive industry
• This position requires fair amount of traveling in the Asia Pacific and South East Asia Region (10-15%)
• Possess strong presentation skills, strong verbal and written communication skills
• Possess strong customer service mind-set with keen enthusiasm for spare parts/power generation products
• Good interpersonal and communication skills
• Independent and results-oriented with strong business and commercial sense
• Prior spare parts experience with engines manufacturers will be advantageous
• Bilingual capability in English and Mandarin will be advantageous

WORKING HOURS / LOCATION

• 5-day work week
• 8.30am to 5.15pm
• Located in Jurong

OTHER BENEFITS

• Annual leave - 15 days up to 21 days
• Medical, dental, optical and annual health screening benefits
• Company transport provided at Boon Lay MRT station
• Other allowances applicable

Salary is commensurable to educational qualifications and working experience of the candidates.

Interested applicants, please attach your resume with your current salary, expected salary, reasons for leaving and notice period upon application.

(Please note that only shortlisted candidates will be notified)

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

C&S Resident Engineer

Institution Project

Job Description:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• Report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timely completion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must have the strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements especially to comply with CA's criteria for buildability and safety assurance system.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Manage the site supervisors with respect to C&S engineering works, architectural and M&E engineering works.
• Implement and sustain the site supervision quality & safety assurance system
• Ensure that proper site documentation for on-going works, site meetings, safety records, method statements, shopdrawings, as built submissions, etc are well managed.
• To attend site progress, technical, client-consultant, variation and coordination meetings
• Interpret drawings and contract documents on works to be carried
• Any other task assigned from time to time.
• Estimated commencement of work in January 2025.

Job Requirement:

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore
• Accredited with IES/ACES with a valid Resident Engineer Practicing Certificate
• Minimum 8 years C&S work experience with strong knowledge in construction of building structures.
• Knowledge in BIM and VDC capabilities will have an added advantage
• A good team player with effective communication skills and able to interact with people at all levels.
• Preferably with experiences in Institution projects.
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements
• Good supervisory and leadership skills, with experience in leading a team of Resident Technical Officers

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

As a Technical Sales Engineer, you will be the technical expert on SESTO Robotics' products, helping customers, partners, and integrators effectively integrate our Autonomous Mobile Robots (AMRs) into their specific applications.

Working closely with the engineering teams, your role will involve addressing customer challenges by offering tailored solutions that showcase the value of our products. You'll guide customers through the adoption process, ensuring seamless integration while providing technical know-how and driving successful implementations.

Specific Responsibilities:

1. Identify and Qualify Sales Opportunities:

- Actively identify and qualify new leads through market research, networking, and outreach activities.

- Assess customer automation needs and pain points to propose suitable Autonomous Mobile Robot (AMR) solutions, including payload and application-specific requirements.

2. Sales Strategy and Pipeline Management:

- Manage and monitor the sales pipeline, forecast revenue, and track performance against targets using CRM tools.

- Collaborate with cross-functional teams like Engineering, Marketing, and Customer Success to drive sales efforts and ensure alignment with customer needs.

3. Technical Proposal Development and Documentation:

- Create technical proposals, cost estimates, commercial offers, and tender documentation in consultation with internal technical teams.

- Address technical and commercial queries from customers to ensure clear understanding of proposed solutions.

4. Proposal Presentation and Negotiation:

- Prepare, present, and negotiate proposals, quotes, and contracts, ensuring all payload and application requirements are met.

- Negotiate terms and conditions with customers to ensure alignment with company policies while securing favorable agreements.

- Handle objections and challenges to close deals effectively.

5. Customer Relationship Management:

- Build and maintain strong relationships with key decision-makers and stakeholders in target accounts.

- Conduct meetings, presentations, and product demonstrations to highlight the benefits and value of AMR solutions.

- Serve as the main point of contact for customers, providing post-sales assistance as needed.

6. Collaboration with Technical Teams:

- Work closely with technical experts to develop tailored solutions and presentations that meet customer requirements.

- Utilize technical insights to strengthen the value proposition and enhance the competitive edge of AMR solutions.

Requirements:

• Ability to read mechanical drawings
• Ability to read basic electrical schematics
• Basic programming skills preferrably in Python or C/C++
• Excellent reporting writing and communication skills

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

COMPANY DESCRIPTION

We are one of the largest one-stop Underground Utilities Infrastructure companies based in Singapore. We provide Underground Utilities Infrastructure construction and maintenance, sewer pipeline rehabilitation, road and airfield construction and maintenance as well as asphalt pre-mix production and construction waste recycling.

RESPONSIBILITIES

• Assist the Project Manager with daily project activities, including coordination, scheduling, planning, and implementation of work.
• Conduct regular site inspections to ensure construction activities are carried out in compliance with approved designs, contract specifications, safety standards, and quality requirements.
• Provide recommendations for corrective actions when deviations from the project scope, schedule, or quality occur.
• Serve as the point of contact for clients, consultants, authorities, and internal teams, ensuring effective communication of project progress, specifications, and any challenges.
• Review project proposals and plans to align project objectives with management expectations, ensuring performance criteria and client needs are clearly understood and incorporated.
• Oversee project timelines and milestones, proposing adjustments and modifications to the schedule as needed to ensure timely delivery.
• Assist in the achievement of team goals by actively contributing to relevant tasks and maintaining a collaborative work environment.
• Liaise with clients to coordinate project plans, schedules, and deliverables, ensuring alignment with client expectations and project requirements.
• Prepare and submit all necessary documentation, including method statements, risk assessments, progress reports, monthly reports, and other key project documents.
• Prepare and submit monthly progress claims in a timely manner, ensuring accuracy and completeness.
• Perform other duties or tasks as assigned by immediate superior or Head of Department.

• Degree in Civil Engineering recognized by Singapore Professional Engineers Board (PEB)
• Minimum 3 year of experience in constructions or civil engineering
• Those with experience in underground utilities especially cable pipes will be advantageous
• Possess excellent interpersonal and communication skills
• Service-oriented client relationship and people
• Self-motivated and able to work independently
• Preferably possess a valid Class 3 license

• 6 days work week
• Preferably possess a valid Class 3 license

Other Benefits

• Enjoy a company-provided shuttle for easy transportation to and from the office, including lunch trips.
• Free access to medical teleconsultation services for your convenience.
• Portable Medical Benefits Scheme (PMBS). Enjoy an additional monthly contribution directly to your Medisave account.
• Comprehensive Medical Benefits. Includes coverage for dental care and health screening through the company's provider.

Why Join Us

• Dynamic Work Environment: Thrive in a fast-paced, ever-evolving workplace that offers new challenges and opportunities every day.
• Varied Responsibilities: Take on diverse and exciting tasks that keep your role engaging and fresh.
• Collaborative Team Culture: Join a team that values open communication, efficiency, and a strong commitment to security.
• Growth and Development: Benefit from a supportive environment with ample opportunities for professional growth, skill development, and career advancement.

• Basic up to $3500 + AWS + VB
• 5 days work per week
• Monday – Friday , 8.30am – 6pm

Responsibilities:

• Understand customer requirements and develop tailored technical solutions.
• Support the Sales team in developing, marketing, solutioning, and deploying smart IoT solutions, integrating both software and hardware components for trials.
• Assist customers throughout the development cycle, from design specification to final acceptance.
• Collaborate with cross-functional teams to ensure a seamless handover to the project team for system installation, commissioning, and configuration.
• Monitor presales progress, identify potential challenges, and implement solutions to ensure project success.
• Coordinate and communicate with software developers, hardware engineers, and site operations to align efforts.
• Conduct site monitoring to verify that systems perform optimally and meet project specifications.
• Assist with IT system configurations, including networking and communication protocols.
• Provide ongoing technical support and troubleshooting during and after deployment.
• Training will be provided for candidates who possess relevant certifications (eg: electronics) but lack work experience

Requirement

• 2+ years of experience in a Presales Technical role or similar position have the advantage
• Knowledge in BMS & ELV Systems e.g. PA system, Fire Alarm System, CCTV system, Card Access, Structure Cabling & etc
• Knowledge of both software project lifecycle and DevOps practices
• Experience with a mix of software and hardware deployments
• Familiarity with IT systems, including networking and system monitoring
• Strong problem-solving skills with the ability to manage multiple presales activities
• Excellent communication skills and the ability to work collaboratively with diverse teams
• Experience in Video Manager software in comp's products: CCTV
• Able work independently and also with other both indoor and outdoor locations
• Co-ordinate and work closely with the external parties and customers to plan, organize and execute the project related activities.
• Assist the manager in engineering works such as system designing, documentation, testing & commissioning (T&C) for BMS systems
• Experience in IoT, smart building systems, or ELV (extra-low voltage) technology
• Familiarity with site operations, safety protocols, and field troubleshooting
• Experience in project monitoring tools and automation is a plus.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions