We are looking for a Process Design Engineer - Gas / Environmental / Ultra Pure Water / Chemical Systems with the following responsibilities,

- Responsible for concept and detail design for Process Facility systems for entire courses for projects (Conceptual Design, Detailed Engineering calculations, System & Component sizing, Budgeting, Drawing development coordination from Engineering up to construction stage e.g. PIDs / layouts / sections).

- Capability of interdisciplinary understanding and managing of relevant interfaces.

- Ensuring that all technical standards, drawing formats and symbols.

- Tendering process (e.g. Rechnical and Commercial bid evaluation).

- Time and schedule management.

- Check and review engineering document and drawings for accuracy and completeness for submission and shop fabrication (e.g. Submittal Procedure).

- Lead system design and reviews with customers and ensure customer sign off and approval.

- Review of all the bench mark data’s, scope and design change and contract variation aspects.

- Support project manager is kept aware of the process engineering design and construction progress and any cost and schedule impacts.

- Coordinate installations with sub-contractors on site.

- Support CSA & M&E team for the design including CAD team and project effectively & efficiently.

- Involved in the Commissioning of Systems and develop the documentation with the sub-contractors.

- Consolidate and upkeep in-house engineering Standards.

- Able to work independently

- Willing to travel/ relocate

(Hiring for new branch located at WEST area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Mon.- Fri. Office working hours
• Salary Range: Basic salary $2,600 ~ $3,500 + Incentive/Commission + Creative Performance Bonus)

Responsibilities

• Responsible for developing long term customer relationship and maximizing customer retention;
• Support on pre-sale and post-sale, not limited to solution proposal on technical requirement, design & budget control, timeline management, etc. based on projects;
• Participate in industrial related exhibitions, marketing campaigns/events;
• Other ad-hoc duties assigned by the superior.

Qualifications

• Min. Higher Nitec in Engineering (any field), or equivalent;
• Entry level applicants with the right learning attitude and positive minder are welcome to apply as comprehensive On-Job-Training will be provided;
• Excellent written and oral communication skills
• Pro-active, possess technical and Negotiation/social problem-solving skills with attention to details;

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work.

(We regret to inform that only shortlisted candidates will be notified)

Job Description

The Assistant Customer Support Engineer (ACSE) will be responsible for executing the functions of MCR (Master Control Room) which is a 24/7 service. This includes :

• Monitoring all permanent & occasional services in MCR, follow the SOP to restore the service in case of any issues. Report and escalate the incident to the next level if needed.
• Handle the customer enquiries and booking request.
• Arrange the resources and co-ordinate with other Regions and third parties for the ad hoc transmission & turnaround services.
• Input the booking request into the booking system, ScheduAll.
• Operate the measuring and monitoring tools to ensure all services are meeting the specifications.
• Monitor and carry first line operations for the facility equipment, such as but not limited to Antenna Control, Up/downlink RF platform, compression & transmission platform. Report to the supporting engineer and corresponding vendors if any anomaly were detected.
• Monitor the facility infrastructure, such as but not limited to Power Supply System & Air Conditioning System and report to the corresponding vendors if any anomaly were detected.
• Roles & duties are subject to change according to the changing of business needs.
• Need to work on 12 hours rotating shift.

The ideal candidate would have:

• a good understanding of satellite and fiber transmission.
• a good understanding of IP protocol and networking.
• an understanding of video & audio quality measurement and compression systems will be an added advantage.
• experience in the technical and operation areas of a similar broadcast environment but no experience also be considered.
• strong attention to details.
• effective communication and time management skills.

This person must be a team player, customer focused dedicated, energetic and has strong multi-tasking skill. The position is based in Singapore.

We regret that only shortlisted candidates will be notified.

Purpose

The primary role is to manage the deployment of 3.5/2.1GHz RAN systems in order to meet network rollout and performance objectives based on IMDA’S 5G license requirements.

Duties and Responsibilities

1. Co-ordinate and work with StarHub, M1 and the System Vendor to deploy the 3.5/2.1GHz RAN equipment to ensure project timeline is met.
2. Plan and coordinate with StarHub, M1 or other MNOs for any integration of new network elements (such as service orchestration platform) into Antina’s RAN network in a timely manner.
3. Oversee monthly network performance and usage reports to ensure compliance with Wholesale and Shareholder Agreement.
4. Daily monitoring and analysis of radio network performance using KPI statistics/3rd party crowdsource data/drive test logs and coming up with network insights/recommendations with the goal of improving network quality performance.
5. Detecting network performance degradation and jointly formulating proper corrective actions with both StarHub/M1 as part of network quality assurance.
6. Manage and evaluate the change requests of any network parameters raised by StarHub and M1, as part of network optimization efforts.
7. Plan the network evolution roadmap collectively with StarHub and M1 to ensure the 5G RAN stays ahead of competition in implementing the latest technology/capability/feature in a timely manner.
8. Plan and organise resiliency audit jointly with StarHub and M1 on 5G RAN systems (including transport network where relevant) to ensure compliance with IMDA 5G license requirement.
9. Work jointly with StarHub and M1 to monitor the radio network performance and ensure IMDA 5G QoS requirements are met.
10. Jointly developing and evaluating RFx technical requirements with Starhub and M1.
11. Collaborate with StarHub and M1 to ensure compliance with all other IMDA 5G licensing requirements such as project milestones, UAT reports, Requirement Traceability Matrix and etc.
12. Liaise with IMDA on 5G Exploratory Platform (5GEP) deployment requirements such as provision of configuration information for 5GEP infrastructure setup and latest patches for equipment and software etc
13. Administer all system and user management functions of the Network Planning Tool / System, which include assigning access right to users of StarHub and M1, performing software and hardware upgrades and system maintenance (such as map info / database maintenance)

Job Requirements

Qualifications:

1. Degree in Electrical or Electronics Engineering, preferably with specialization in Info-communication or computer engineering or related qualification.
2. Possess 6 to 10 years of relevant experience.

Technical Skills:

1. Preferably to have some essential IP networking knowledge.
2. Good working knowledge of network measurement post processing/coverage planning//OSS (Nokia NetAct) tools.
3. Strong technical knowledge in 4G and 5G radio access networks (RF optimization, planning, architecture, solution), with excellent data analytics skills (PowerBI, Tableau) coupled with strong proficiency in Microsoft (excel, power point, word).
4. Programming is an added advantage (SQL, Python)
5. Strong data analytical and technical solution ability.

Interpersonal skills:

1. Maintain a strong learning attitude and able to keep up in a fast-paced environment
2. Able to work independently and is also a good team player.
3. Possess good communication skills.
4. Strong commitment to work and have good initiatives.

How to apply:

Visit our company website at www.antina.com.sg for more information or send your CV directly to [email protected].

Antina is a company driven by ability and hardwork. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Job Descriptions:

Simtrum was founded in 2019 with the core mission to serve the optical industry with innovation and efficiency. Our founding team has decades of research and development experiences (across NUS and A-star) in high-end microscope systems. We now focus on confocal, super-resolution microscopy and other related fields, catering to both academia research and high end industrial production needs. Our proprietary high resolution microscopes adopt state of the art optical technology, image processing algorithms, with excellent imaging performance to meet the high resolution and fast imaging needs of our technology partners.

Simtrum is a young startup with many exciting opportunities to offer to the right candidates with the right mindset. We are now seeking the following commercial talents to join our team, to expand our reach and support our growth:

Job Descriptions:

1. Visit university professors to promote the company's microscope products and complete sales tasks.

2. Develop regional business based on existing products and assist in collecting market information for products under development.

3. Identify potential markets and establish effective market entry methods.

4. Establish marketing plans and strategies to expand your customer base.

Basic Requirements:

1.Ideally you should have a foundational education in either Electronic Engineering, Photonics, or Physics;

2.exposure to Laser or Optics industry a huge plus. Candidates with at least 1-2 years of related sales, marketing or e-Commerce experiences will be given priority considerations.

3.We are also open for fresh graduates with the right attitude and willingness to learn. To do well in the Simtrum environment, you should be someone with initiative, curious, can-do attitude, flexible, and eager to learn.

Position

We are looking for Applications/Systems Programmer to join our Application Services department to help us implement DevOps. This a very hands-on technical role to drive continuous improvement initiatives on top of day-to-day BAU support. We want someone with fresh and relevant ideas who is passionate about learning new things and wants to develop themselves further.

As we are covering the bank’s global operations, you will work in rotational shifts** and also be occasionally doing on-call support*** during non-business hours. This will be an opportunity to have a better perspective of what can be further improved in production!

**On call support: This covers 7 consecutive days during non-business hours to manage escalated incidents and to work on planned changes, weekend included.

***Rotational shifts: Members in the team will rotate accordingly around 3 shifts (time will shift to an hour later during the daylight saving time period in the year).

• Morning: 7am-4pm
• Afternoon:2pm-11pm
• Evening: 5pm-2am

Main responsibilities

You will mainly be responsible for:

• Providing primary operational technical support and assist the functional support teams
• Improving complex operations (DRP, Migrations, Major maintenance etc.)
• Improving reliability and quality of our systems (automation, monitoring, alerting, security, RCA etc.)
• Reducing time-to-market by implementing CICD pipelines where possible
• Managing technical issues, escalations and ensuring good level of delivery
• Maintain, improve and standardize existing workflow processes and framework
• Promoting knowledge sharing within the organization (trainings, documentations etc.)
• Bridging the gap between Dev and Ops
• Maintain programmable code outlined in technical instructions and specifications for operating systems.

Qualifications and Profile

At least a Bachelor’s degree in any of these faculties:

• Computer Science
• Information Technology
• Programming & Systems Analysis
• Science (Computer Studies)

Functional

• Experience in a banking environment in a plus.

Technical

• Minimum 3 years of experience with UNIX environments
• Minimum 3 years of experience in scripting languages such as Python, Powershell
• Minimum 2 years of hands on experience in any of these tools and technologies such as Ansible, Gitlab, Azure Devops, Docker, Kubernetes
• Experience with task schedulers such as Control-M
• Good understanding of IT ecosystems and application architectures
• Knowledge about

- CICD pipelines, ITIL practices, Agile practices, Lean

- Observability tools such as Grafana, Kibana, Prometheus, AppDynamics or Dynatrace is a plus

Other Professional Skills and Mindset

• Good analytical and problem solving skills
• Proactive and able to propose new ideas
• Positive attitude towards continuous learning and improvement
• Team player
• Curious about new technologies

Interested applicants, please email your resume to Shaun Quek Yew Meng

Email: [email protected]

CEI Reg No: R1660732

EA Licence No: 99C4599

Position

The candidate will work on below main roles.

• Industrialization: Implement all necessary tools to manage the environments, the continuous integration, the continuous delivery and the processes execution.
• Environments: Manage and administrate environments from assembly to production (rules included), infrastructure implementation, operational usage.
• Operations: Execute the maintenance operations, delivery and environment monitoring.
• L3: Operate as L3 on non-production environments for delivery teams and also on production for support teams.

Main responsibilities

• Participate to the automation of the deployment solution.
• Participate in environment preparation for testing phases.
• Participate in developing tools to simplify day-to-day activities on the program.
• Facilitate coordination between program developers and infrastructure engineers.
• Ensure continuous improvement and maintenance of the CI-CD pipeline.
• Provide investigation help while fostering knowledge and sharing best practices with team members.
• Document processes and ensure their properly followed.
• Ensure high standard delivery to production.
• Research, design, and develop software.
• Analyse user needs and develop software solutions
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with other engineers to integrate hardware and/or software systems
• develop specifications and performance requirements.

The position requires autonomy and reliability in performing duties while maintaining close communication with rest of project/support team.

Qualifications and Profile

At least a Bachelor’s degree in any of these faculties:

• Computer Science
• Information Technology
• Programming & Systems Analysis
• Science (Computer Studies)

Mandatory

• At least 3 years in Software development or DevOps team.
• At least 2 years in Java/J2EE development
• At least 2-year experience with Jenkins, GIT (GitLab)
• At least 1-year experience in Ansible
• At least 1-year experience in GitLAb

Good to have

• Experience with DevOps methodology & tools like Jenkins, GIT (GitLab), Ansible, Docker/ Kurbernetes, CICD pipeline, Java dev context for the tooling, Database or Big Data storage systems, Grafana / Prometheus / Alert Manager / ELK / Kibana, Jira etc.
• Experience of grid computing.
• Basic understanding of finance and investment banking especially Market Risk.

Other Professional Skills and Mindset

Other Professional Skills and Mindset

• Excellent written and verbal communication skills for both team mates and management
• Strong analytical and problem solving skills
• Proficient software development life cycle
• Appetite to follow technology trend and participate to communities
• Passion for sharing expertise and grow team members’s skills
• Interest in learning from team members and mentoring junior team members on the path of high quality deliverables.

Interested applicants, please email your resume to Shaun Quek Yew Meng

Email: [email protected]

CEI Reg No: R1660732

EA Licence No: 99C4599

On behalf of our hiring client which is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as a Test Engineer.

Responsibilities

• Plans and liaises with Authorised Examiners, Testing Teams, and Clients (and Transport Company for Full Load Test) on yearly testing of lifts and escalators.
• Review and improve efficiency of annual testing, with innovations and initiatives.
• Responsible for timely renewal of Permit To Operate (PTO).
• Provides advice on PTO renewal procedures to clients.
• Leads a group of technicians to perform the annual test.
• Plans and liaise with Audit Teams and Servicing Teams, on Safety and Housekeeping audit on lifts.
• Any other ad-hoc matters/issues assigned by Dept Head/Manager

Requirements

• Possess a diploma in the Engineering field
• Has prior experience in leading/supervising a team

EA license : 22C0971 | EA Rehgistration : R21101298

Job Description & Requirements

Responsible for the execution of civil design involving the preparation of calculations and review of civil design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

Duties & Responsibilities:

• To lead the Engineer team to carry out civil and structural engineering jobs in front end engineering design, detail engineering design.
• To assist discipline Manager in project civil portion manpower.
• To generate project specifications, design philosophy, calculation template to comply with clients’ requirement and local authority’s requirements.
• Civil project team manhour control, schedule control.
• To prepare foundation, structural or hydraulic calculation sheets, from simple to more complicated items, in accordance to project specifications, criteria and information. Ensuring correct and accurate calculations of loads and member sizes of structures. On average, a Civil Engineer II produces three simple foundation calculation designs a day or 1 structural calculation report a week.
• To prepare three-dimensional (3D) models and design drawings for structures and foundations as well as shop fabrication drawings.
• To supply design drawing information and instructions to Designers ensuring technical completeness and clearness of data for effective workflow.
• Usually prepares anchor bolt list and setting bolt list for client’s procurement purposes ensuring at least (+)/(-) 10% safety factor and meeting client requirements.
• Checks own design outputs and reviews design drawings to ensure accuracy and completeness to design requirements and concepts.
• May act as Assistant Key Person for small projects or NIDC projects.
• Coordinates with other Engineers and Designers to facilitate production of civil design and drawing outputs.
• Performs other functions that may be assigned by the Department Manager.

Requirements:

• Bachelor’s degree in Civil Engineering.
• Minimum of ten (10) years in the field of years plant engineering design and construction experience in Oil & Gas, Refinery, Petrochemical, Chemical, Pharmaceutical and industrial plants and consistent career experience in the engineering department

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Basic knowledge on STAAD, AutoCad and Micro station.
• Possess good communication and technical skills
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyzes, and interprets common technical information, contract reports and instructions.

Interested parties, please send in your detailed resume.

Job Summary

Responsible for department activities such as undertaking all tasks related to any particular area of expertise i.e. confirmation or development of criteria, specification and project requirements as well as systems and databases.

Responsibilities:

• Consistently oversees all General Civil Works, Structures and Foundations in coordination with the client or the Lead Engineer.
• Normally prepares, evaluates and reviews the criteria, specification and requirements of the General Civil Works, Structures and Foundations of an assigned project, ensuring its completeness and correctness.
• Generally develops a system and/or database in any area of expertise to ensure that all records of past projects are well documented for accessibility and future use.
• Most often function as trainer to educate other colleagues in the department for familiarity and improvement of work execution in area of expertise.
• Ensure technical improvements and required modifications are discovered in accordance to the conduct of a design review.
• Occasionally assumes the Key Person’s role as assigned by the Department Manager in order to ensure that project schedule is met.
• Periodically appraises the members of the assigned Project Team ensuring fairness and acceptability.
• Performs other functions that may be assigned by the Department Manager.

Requirements:

• Graduate of Civil Engineering or other related courses.
• 15 years and above experience in engineering design and/or construction of petrochemical-related facilities with at least three (3) years in supervisory position.

Skill Requirements:

• Computer literate in Windows, MS Office, STAAD and AutoCAD.
• Possesses good oral and written communication skills, with special consideration in Business Writing skills.
• Boasts of sound management.
• Planning, motivating and decision-making skills.
• Knowledge of ISO Quality Management System and JPHIL Quality System is necessary.

Other Requirement:

• Exercises self-discipline, patience and firmness in decision making.

Interested parties, please send in your detailed resume.

About the Role:

The Infrastructure Engineer (OSP) + End User Computing (Digital Workplace) SAM contributes to the successful design, implementation and maintenance of infrastructure solutions, primarily key digital workplace tools that meet the requirements of the organization. This role performs configuration and daily operational activities (through Vendors) while providing last level technical support on Digital Workplace domain. In addition, the role collaborates with other team members and across teams in developing and defining policies and strategies for integration across IT.

Roles and responsibilities:

Digital Workplace Management

• Continuously modernize the Digital Workplace ecosystem and ensure that every component of its lifecycle is well managed.
• Support the development and execution of the digital workplace program.
• Contribute to the planning, communication, assessments, and implementation of the digital workplace solutions.
• Contribute to the research on the best practices within the digital workplace solutions as well as digital workplace innovation.

Infrastructure Engineering

• Design, install, and develop infrastructure solutions, ensure alignment with the architectural vision, and monitor maintenance of running systems.
• Apply deep domain expertise to ensure that the infrastructure is in a correct and understood state.
• Provide oversight and technical direction to colleagues and external partners in accordance with the organization's policies and procedures.
• Perform technical checks, analyzing errors and tracking solutions of errors, planning and performing upgrade and installation tests for assembly and validation.
• Contribute to the overall quality of service delivered to internal users and clients and supports the Service Operations Manager in continuing improvement of processes.

Operations and Maintenance

• Plan and support the ongoing maintenance of IT infrastructure, ensuring minimized down time and all the house-keeping jobs are executed effectively on a daily, weekly and yearly basis.
• Schedule and support backups and restoration of systems, and plan and test disaster recovery for the infrastructure.
• Perform configuration and daily operational activities (through Vendors) while providing last level technical support and knowledge transfer for team members and Vendors on Digital Workplace domain; Including but not limited to the following:
• Unified Endpoint Management & Endpoint Protection Suite.
• Image Creation and Deployment Tools. Working experience with SCCM.
• Windows Client OS Image Standardization& Lifecycle Management.
• Video Conferencing & Virtual Desktop Infrastructure.
• Develop methodologies and practices to manage and plan capacity based on projected growth rate to ensure performance remains at acceptable levels.
• Contribute to troubleshooting/problem analysis on IT infrastructure issues.
• Support the applications and product teams in dealing with critical incidents.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Integrity, Empathy, Long-Term View, Agility and Unity form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Minimum 3 years’ experience with designing, deploying and managing IT infrastructure.
• Good understanding of fundamental computer architecture, networking, virtualization, storage, and operating system components.
• Experience with cloud infrastructure desirable.
• Good understanding of IT architecture and interlinkage with infrastructure needs.
• Experience in one or more areas:
• Unified Endpoint Management & Endpoint Protection Suite
• Image Creation and Deployment Tool (e.g., SCCM)
• Windows Client OS Image Standardization& Lifecycle Management
• Video Conferencing & Virtual Desktop Infrastructure

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

• LinkedIn - Olympus APAC
• Company website -www.olympus.com.sg

About the Role:

A team member of RRC (Regional Repair Center) and will be responsible to perform repair of medical endoscopes in RRC. He/ She is also responsible to strictly adhered to the process, safety and quality standards required to repair medical equipment. He/ She also has responsibility to maintain the proper condition of repair workbench as assigned.

Roles and responsibilities:

· Perform repair of medical endoscopes.

· Carry out workshop maintenance task assignment. (5S common area)

· Ensure compliance to GDPMDS requirement at all times.

· Perform 5S in individual and scope repair areas at all times.

· Any other duties as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Integrity, Empathy, Long-Term View, Agility and Unity form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus

• 18 days of annual leave in your first year

• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

· Diploma or ITE in Engineering / Biomedical Engineering.

· Electrical & mechanical soldering experience.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

The Role

· To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

· Develop Offshore Commissioning Procedures for Process Systems and supporting Mechanical Systems / Thermodynamic requirements for Combined Cycle systems.

· To support in developing project deliverables as per project & client requirement

· Prepare & Review of company development work methodology / procedures.

· Develop Facility performance test procedure in accordance with contract requirement.

· Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

· Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

· Carry forward the MODEC HSEQ policies / requirements to the team and meet overall HSEQ objectives in all projects / feedback results to corporate HSEQ team.

· Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly

· Perform duties as per directives of reporting authority.

· Leads site execution team on performing pre-commissioning and commissioning activities planned for the Process systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Process System Commissioning SoW.

· Commissioning of Process Systems, Functional tests and system certification with Class Society.

· Responsible for verification and close out of all Safety critical elements associated with the package.

· Ensure all regulatory and statutory testing and requirements are performed and records are maintained.

· Perform Risk assessment for the commissioning scope, conduct toolbox meetings

· Ensure to supervise Technicians to carry out commissioning activities in a safe and controlled manner in accordance with site procedures and PTW requirements

· Manage discipline and cohesive environment in the office. Monitor / Guide all commissioning engineers/assistants/administrators.

· Day to day Planning of work, Manage schedule & targets of the project as required.

· Identify and manage resource requirement to meet schedule and targets.

· Prepare and maintain commissioning records of site observations, testing processes and checklists

· Coordination of functional testing of commissioned systems and engaging the Operations Team when and where needed

· Troubleshoot the logic function, suggest modification plan of logic diagram, liaise with I&C engineer as well as ICSS vendor, and implement.

· Execute pre-commissioning and commissioning as per procedure and sign-off respective documents with Client representative for system closure.

· Prepare timely and accurate technical report for management and a reference for future.

· Travel to offshore project sites and perform offshore commissioning / assist facility startup.

· Lead the team to perform Start-up at offshore following the start-up procedure, stabilization and performance testing.

· Ability to set priorities and meet deadlines

Qualifications

· Bachelor Degree in Engineering (Process or Chemical) with 14 to 17 years work experience (or) Master Degree in Engineering (Process or Chemical) with 12 to 15 years work experience with minimum of 10 years work experience in onshore/offshore Oil & Gas area or FPSO line(s). Also Diploma in Engineering with 17 to 20 years work experience (making the equivalent to degree) can also be considered.

· Specialist knowledge of at least Three MODEC or related project line.

· Ability to define concepts of completion process.

· Experience of High Capacity Process Production Systems and EPCIC to handover to operations.

· Experience in Complex Gas Compression, Injection, Export Systems and Thermodynamic requirements for Heat Recovery and Steam systems.

· Have proven project experience and skills within the field of Testing, Pre-commissioning, Commissioning execution and startup at offshore

· Experience in offshore plant startup and stabilization and able to provide Operations with technical support throughout start-up, stabilization and performance testing

· Work experience within strict regulatory environments, and aligning commissioning independencies with engineering compliance and contractual requirements.

· High safety awareness is mandatory. A good knowledge of managing simultaneous operations (SIMOPS) is essential.

· Significant knowledge of multiple technologies, projects and applications. Working knowledge of competing and alternative technologies.

· Familiar in use of Software, Database systems related to System Completion, Project Management (MS Project / P6) and General computer literacy (MS office).

· Shows evidence of good Organizing / Management skills.

· Demonstrate ability to take lead.

· Good communication skill.

Commitment to take responsibility.

Job Title : PROCESS / TECHNICAL SUPPORT ENGINEER (ID3347)
Location : Yio Chu Kang
Working Hours: Mon-Fri 8:00am – 5:30pm
Salary : $3300-$4300

Job Descriptions :
• Be a team member of the sales department
• Study technical enquiries and interpret client requirements and/or URS
• Participate and lead technical clarification meeting
• Provide process design, technical and application support including
process flow diagram or flowsheet generation
• Provide costing on proposed equipment/solutions according to customer
requirements within the stipulated budget; prepare quotation together
with the scope of supply on technical specification.
• Prepare technical presentation to client
• Liaise with factory or counterpart to request for quotation
• Work with draughtsman for the process flow diagram or flowsheet and
layout generation.

Job Requirements:
• Degree/Diploma in Mechanical/Mechatronic/Chemical Engineering or equivalent.
• With at least 2 years of relevant experience in technical support engineer
• Applicant who have relevant experienced in Powder Processing System & Equipment or Engineering Sales is an added advantage
• Self-motivated, independent and able to work in dynamic environment
• A great team player with exceptional interpersonal, communication skills and ability to work independently and in a team
• Fresh graduates are strongly welcomed to apply.
• Willing to travel (Occasional)

• Marine Electronics & Telecommunication
• Basic $3000 - $3500
• 5 days (8.30am – 5.30pm)
• Location: Pandan Loop

Responsibilities

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements

• Min Diploma/ Degree in Engineering or other relevant
• No experience are also welcome

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

We are seeking a well qualified candidate to join us as Large Language Models (LLM) Engineer.

The primary responsibility of this role is to develop, deploy and optimize Large Language Models and machine learning solutions into production either on-premises or on cloud platforms.

Roles & Responsibilities:

· Work closely with clients to understand their requirements and deliver custom solutions.

· Extend prototypes and improve them to robust and scalable solutions.

· Design and fine-tune large language models for specific applications.

· Efficiently handle large language models in production environments to enable (almost) real-time solutions.

· Build and run ML pipelines, and deploy models that improve accuracy of various process steps within our pipeline.

· Write technical papers, reports, and document best practices.

Important Personal Traits:

· Learning oriented and keen on stay updated on cutting-edge advancements in large language models and NLP.

· Strong analytical and problem-solving skills.

· Excellent communication skills.

Job Requirements:

· 3+ years of experience in NLP or a similar role.

· Understanding of data structures, data modeling, ML algorithms and software architecture.

· Experience writing code in Python+ ML frameworks (like Keras or PyTorch) and libraries (like scikit-learn).

· Practical experience with ML cloud Services on AZure or AWS (I.e. Azure ML,Amazon SageMaker or MLFlow)

· Basic understanding of access management, e.g. IAM and RBAC

· Optimization experience in areas such as deep learning computational frameworks is a plus

· Masters or PHD degree in a relevant field (Computer Sciences, Information Technology, Mathematics, Physics, etc.)

Good to have:

· Experience with CI/CD systems (Jenkins, Azure DevOps or similar).

· Solid understanding and practical experience with Git, Linux, Containers and Kubernetes.

· Basic understanding of infrastructure aspects including networking and storage.

· Familiarity with GPU hardware architecture, proficiency in CUDA, etc.,

· Cloud Certifications – ML Speciality.

Roles and responsibilities:

To provide excellent customer service towards stakeholders and external customers.

Scope of work:

· Perform basic functionality inspection on Demo/Loaner asset that are returned to store after loan.

· Perform in-house inspection, assessment and troubleshooting of medical equipment that are sent in for repair.

· Conduct detailed investigation for complaints on medical equipment and prepare reports as required.

· Perform Quality Checks on Medical equipment after repair.

· Conduct On-Job Scope Handling, Inspection Practices, Trainings, and Culture Induction for Interns.

· Perform On-Job Medical equipment Assessment, Repair and Quality Assurance Checks for Engineers.

· Performing 5s Housekeeping such as organising things in order, cleaning, and setting up procedures on a regular basis.

· Adopt customer centric approach.

· To ensure QAQC achieved all KPIs.

· Any other work-related ad hoc duties as assigned

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Integrity, Empathy, Long-Term View, Agility and Unity form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus

• 18 days of annual leave in your first year

• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

· Diploma or ITE in Engineering / Biomedical Engineering.

· Good communication and interpersonal skills

· Positive attitude, detail-oriented, organized, and able to prioritize tasks

· Fast respond

· Attention to details, strict, steady hands and keen eyes to handle delicate components

· Familiar with use of ESA & ESU testers, electrical, mechanical & soldering

· Adopt customer centric approach.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

Job Role

- Conduct preventive maintenance & submitting meter reading in time.

- Provide maintenance and repair issues.

- Providing routine service and maintenance to copiers, scanners, printers, and fax machines

- Setting up and installing new printers, copiers, scanners, and copier management software

- Managing orders and stock of new equipment, parts, and materials.

- Able to advice customer issue explain on site

- Can work independently, establish good relationship with customers and employees.

- To service, and repair a variety of printers, copiers, and scanners In this role

- Keeping abreast of the latest technologies and practices in the industry.

Reports

- Prepare & update monthly reports

- Diagnose / Tech report if require

Responsibility

 At least a Higher Nitec or equivalent in engineering, business or a related field is required.

 Professional Industrial Certification would be an added advantage

 No experience required as on job training will be provided.

 Valid driver's license and reliable transport preferred.

 Basic written and verbal communication skills.

 Preferred Proficiency in MS Office software (excel)

 Able to work unscheduled hours.

 Good communication and interpersonal skills

 Participate in various learning experiences, which may include attending workshops and training sessions external certification.

 Keeping abreast of the latest technologies and practices in the industry.

Job Description

1. Perform research in the following areas:

• Global performance analysis, including analysis of moored floating platforms and bottom-founded structures in wind, waves and current, to derive rigid body responses and/or
• Global structural dynamic analysis to derive structural responses for strength and fatigue assessment

2. Assist in conducting physical model tests, field experiments and numerical simulations to support the development of integrated physical-numerical modelling and simulations.

3. Collaborate with industry partners, affiliated research institutes and other relevant stakeholders to contribute to grant proposals for research funding consistent with the strategic goals of TCOMS.

4. Any other duties as assigned by supervisor.

Job Requirements

Qualification & Field of Study:

• Bachelor/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Naval Architecture, Applied Mathematics or other related disciplines.

Work Experience:

Preferably relevant research/industry experience with competent knowledge in some of the following areas:

• Offshore engineering, marine engineering, hydrodynamics, naval architecture and ocean engineering.
• Prior knowledge in the following numerical methods/software/programming languages will be an advantage:
• CAD software such as SolidWorks, Rhino, AutoCAD
• Engineering tools such as WAMIT, SESAM, OrcaFlex and OpenFAST
• Finite Element analysis tools such as SESAM, ABAQUS
• Programming codes such as FORTRAN, Python, MATLAB, C++ or equivalent.

Other Requirements:

• Good interpersonal and communications skills.
• Ability to adapt and work effectively as members of a team.
• Strong communication and excellent writing skills
• Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 3 years of hands-on experience in digital-physical design.
• Master’s/Bachelor’s degree in Electrical Engineering with an emphasis in IC design， master's degree preferred.
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.
• Bilingual to communicate with associates in China is perferable.

COMPANY DESCRIPTION

Mediacorp is Singapore’s largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

The Engineer shall plan and install delivery links to send the audio video feeds from the event sites to the designated location(s) by deploying suitable technologies. He is to ensure the feed received at the designated location is of broadcast quality and monitor them throughout the events. He will have to liaise with many parties such as the vendors and building owners during the work. He will also need to maintain all the delivery equipment well to ensure they are always operationally ready.

Responsibilities

• Manage projects related to Media Delivery links.
• Establish various types of Media Delivery technologies include cellular bonding technology, optical fiber link, microwave link, IP streaming, Mesh Radio link and etc.
• Set up equipment at outdoor venues and ensure all power supplies requirements are adequate and appropriate for Live operations, that comply with safety regulations.
• Liaise with the agencies and building owners for the approval of use of the premises.
• Work over weekends public holidays and after office hours depending on the job requirements.
• Perform standby duty for VIP events (e.g. breaking news, emergency events, BCP exercise and etc.)
• Perform regular equipment maintenance and housekeeping.
• Adhere to workplace safety and cyber security policy while performing duties.

• Higher Nitec/Diploma/Degree in Engineering or IT discipline
• Minimum 1 year of relevant experience. Fresh graduates may be considered if found suitable for the position
• Knowledge in digital transmission, such as COFDM, MIMO technology
• Knowledge in IT networking includes Cisco Switches
• Knowledge in Linux and/or Window OS
• Basic Cyber Security knowledge
• Basic RF knowledge will be an advantage
• Certified to work at height will be an advantage
• Possess a valid Class 3 driving license

Job scope:

• Interpret project requirements to design, integrate, source and implement electronic system and relevant peripherals to meet projects deliverables on schedule.
• Embedded system design, programming, troubleshooting and maintenance.
• Work closely with mechanical, electrical and software engineers for system integration to meet project deadlines.
• Ensure design, proposal drawings, implementation comply with specifications, requirements, regulations, and quality standards.
• Technical documentations for internal and external customers.
• Prepare accurate operating, design documentation for deployed system for internal use.
• Prepare documentation for external customers and compliance verification.
• Coordinate with local and overseas suppliers for parts, fabrications, and assemblies
• Maintain vendors for services, components and works.
• Maintain part/component/tooling list with proper housekeeping.
• Manage delivery timeline with regards to project schedule.
• Perform ad hoc duties as assigned by management.

Knowledge, skills and experience:

• Bachelor’s degree in Electronic/Electrical/Mechatronics engineering.
• Knowledge on electronic design principles, PCB designs.
• Experience on embedded system, microcontroller and RTOS programming.
• Understand common communication protocols, e.g. RS232, CAN, SPI, I2C etc.
• Hands-on experience is a must, e.g. PCB assembly, troubleshooting and wiring.
• 2 years relevant experience in electronic design and embedded system.
• Valid Class 3 or above driving license is a plus.
• Must be able to read and understand product manuals written in Chinese.
• Can communicate fluently in Mandarin with our suppliers from China and Taiwan.

Job Summary

Responsible for the analysis and preparation of specifications and construction drawings, design documents for process and industrial plants in accordance with project specification schedule and customer requirements.

Duties & Responsibilities

• Responsible for field instrument and control system design work.
• Able to lead small/medium size project within budgeted MH, cost and project schedule.
• Prepare and review field instruments, Analyzer, Control Systems (DCS, ESD, F&G etc) specification, requisition, TBE, vendor document review.
• Prepare construction drawings such as Location layout, hook-up, cable routing, loop diagram etc. based on project specifications.
• Generate specification requisition for various process instruments, evaluate and select suitable instruments for required process control/monitoring application.
• Preparation of technical proposals (e.g. TBE) and cost estimation for tender projects.
• Preparation Vendor’s Document Review, BMBQ, Man-hour estimation and related.
• Engineering Support at site, attend Field Instrument & Control Inspection, FAT at vendor’s workshop and SAT & Loop Check at site.
• Perform other functions that may be assigned by superior.

Requirements

• Bachelor’s degree in Chemical Engineering, Electrical and Electronic Engineering or Instrument and Control Engineering.
• 8 years’ experience in instrument and control system design work.
• Knowledge and experience in Field Instrument Engineering as well as Control System, e.g. DCS, ESD, F&G.
• Able to work at construction site to support construction, pre-commissioning and commissioning activities.
• Good interpersonal and communication.

Interested parties, please send in your detailed resume.

Job Summary

Responsible for the execution of process design involving preparation of calculations and review of process design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

Duties & Responsibilities

• To lead a process team to carry out process design engineering work in feasibility studies, Front End Engineering Design (FEED) and detail engineering design (Senior Role).
• To generate project specifications, design philosophy, PFDs, P&IDs, calculations, operation manuals to comply with clients’ requirement.
• To carry out process simulations and develop heat and material balances.
• To carry out process design for reactors, columns, drums, heat exchangers, tanks and develop respective process datasheets.
• To carry out hydraulic design for pumps, compressors, blowers and develop respective process datasheets.
• To conduct or attend P&ID design reviews, HAZOP, IPF, SIL studies, 3D model reviews.
• To check design outputs, datasheets and drawings prepared by Process Engineers to ensure accuracy and completeness to design requirements and concepts (Senior Role).
• To support the Construction Team during construction phase and carry out site checks.
• To support the Commissioning Team during plant or unit startup.
• To coordinate with Project Team and other Department Engineers to facilitate smooth progress of engineering work.
• To perform other functions that may be assigned by Department Manager.

Requirements

• Bachelor’s degree in Chemical Engineering.
• Minimum 10 years’ of experience expected.

Skill Requirements

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good knowledge in PRO/II, HYSYS, HTRI, AUTOCAD and Microsoft Office.
• Possess good communication and technical skills.
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports, international codes and standards.

Interested parties, please send in your detailed resume.

• Carry out equipment PM according to the plant equipment PM schedule
• Respond to breakdowns, diagnose faults and repair equipment
• Work on improvement projects to assure continuous reliability of production equipment and processes to achieve high equipment productivity and low downtime.
• Key-in SPC data for all defined equipment critical parameters
• Support all equipment installation and commissioning during plant start-up phase
• Performs other duties as assigned. Duties will vary according to the project progress and/or the specific goals of the division.