Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Responsibilities:

· Software sustaining and continuous improvement of current machine’s software.

· Responsible for software feature development and enhancement based on customer requirements.

· Provide supporting and troubleshooting to on-site software issues.

· Review and update the user requirement documents and operation procedures.

· Collaborate with mechanical, electrical, application team to implement new hardware feature or software feature to equipment.

· Develop and enhance software utilities to improve equipment setup and easy operating abilities

Requirements:

· Require BS or MS in Electrical/ Electronic/ Computer Engineering or equivalent.

· Proficient in C, C++ programming with Windows OS.

· Experience in PC-based control programming.

· Able to work independently with good interpersonal, verbal and written communication skills.

· Requires minimum of 3 years relevant experience in software development.

· Require travel regionally.

· Experiences in similar kind of project will be advantageous.

· Knowledge in real time control system, object oriented software design Methodologies and database Technologies.

· Good knowledge with vision, motion and Secsgem would be assigned as senior position.

Job Benefits

· 5 days work week

· Group Medical Insurance

· Flexi-Benefits

Only shortlisted candidates will be notified

Starting salary depending on experience

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Purpose and Scope

We are seeking a highly skilled and motivated E&I Engineer to join our team. The ideal candidate will possess extensive experience in electrical and instrumentation systems within power or utilities plant environments. This role involves ensuring optimal performance, safety, and reliability of E&I equipment while leading maintenance initiatives and improvements.

Key Roles and Responsibilities

• HSSE Compliance: Ensure adherence to plant Health, Safety, Security, and Environment (HSSE) standards. Actively participate in HSSE walkdowns and initiatives to maintain high safety standards.
• Methodology Preparation: Develop, review, and implement Method Statements (MS) and Risk Assessments (RA) for all electrical and instrumentation work activities to mitigate risks and enhance safety.
• Maintenance Planning: Plan and schedule both corrective and preventive maintenance works. Collaborate with operations, OEMs, and contractors to prioritize tasks, mobilize workforce, allocate resources, and procure necessary spare parts.
• Team Leadership: Lead and mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Issue Troubleshooting: Diagnose and troubleshoot critical and major plant issues, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Shutdown Management: Plan, schedule, and coordinate vendor/OEM shutdown maintenance of E&I systems. Lead shutdown activities and ensure thorough documentation is maintained.
• Procedure Development: Establish and optimize maintenance procedures for all electrical and instrumentation systems, promoting best practices.
• Instrumentation Expertise: Conduct maintenance and troubleshooting on field instrumentation, including control valves, performing loop checks, and executing calibration of instrumentation systems.
• Control Systems Proficiency: Troubleshoot and maintain PLC (Programmable Logic Controller) and DCS (Distributed Control Systems), with a strong emphasis on experience with Yokogawa Centum DCS systems.
• Electrical Systems Maintenance: Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Spare Parts Management: Oversee the review and maintenance of plant critical spare parts inventory, ensuring availability and readiness.
• Documentation and Reporting: Maintain accurate records of maintenance activities and contribute to the preparation of technical documentation, standard operating procedures (SOPs), and maintenance manuals.
• Ad-hoc Duties: Execute other tasks and responsibilities as assigned to support operational objectives.

Qualification, Skills and Experience

• Bachelor’s degree or diploma in Electrical, Instrumentation, or Control System Engineering.
• Minimum of 8 years of relevant experience in a power plant or utilities plant environment.
• Technical Proficiency: Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Problem Solving: Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Team Collaboration: Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Communication Skills: Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Proactive Attitude: Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Leadership Qualities: Effective leadership and mentoring skills with a commitment to developing team members.
• Adaptability: Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

A Corp Lab in NTU is looking for a Research Engineer to work on the NLP project.

Key Responsibilities:

• Research and develop novel ML-based methodologies and algorithms for multilingual and multimodal LLMs.
• Working closely with other Postdoc/RA/PhD students to discuss the ideas and implement the system.
• Publications in top-tier international conferences and journals

Job Requirements:

• Master’s degree in Computer Science, Electrical Engineering or related disciplines
• Prior experience in NLP, and state-of-the-art ML techniques would be a plus;
• Good interpersonal communication and oral presentation skills in English - for research work and publications
• Experienced in working in a team, with people of diverse skillsets and cultural background

We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and prepare report for project progress update
• Prepare project budget and cost estimation
• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring
• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project
• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issue
• To prepare progress claim report and submit progress claim documents according to client requirement
• To prepare operations and maintenance manual after project completion
• To coordinate with inter-departments for operations matters (procurement, engineering, group office)

Competency Requirements

• Diploma or Degree in Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

· Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

· Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.

· Interacting with clients, interpreting their needs and requirements, and representing them in the field.

· Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

· Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

· Reviewing the engineering tasks and initiating the necessary corrective actions.

· Developing specifications for the project's needed equipment.

· Creating frameworks to measure the project's metrics and data collection.

· Establishing field test methods and methods for monitoring the quality of those tests.

· Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

· A Bachelor's degree in engineering or a related field.

· A valid engineering license.

· 4 or more years' field and project planning experience.

· Excellent computer literacy and knowledge of design and visualization software.

· The ability to work with multiple discipline projects.

· Excellent project management and supervision skills.

· Excellent organizational, time management, leadership, and decision-making skills.

· Strong written and verbal communication skills.

· Knowledge of applicable codes, policies, standards, and best practices.

Main Tasks

1. Systems Design & Architecture

• To design security system architecture, including CCTV, access control, intrusion detection and other security systems.
• To develop detailed plans, specifications, and schematics for security systems.
• To ensure the designs meet industry standards, clients’ requirements, and regulatory compliance.

2. Staging and Programming

• To perform staging and pre-program of security systems.
• To pre-configure hardware and software components, ensuring seamless integration before deploying the equipment on site.
• To conduct thorough pre-testing of all system components to ensure proper functionality before deploying the equipment on site.
• To assist in systems commissioning, including calibration and optimization. (Remote)
• To identify and troubleshoot any issue that arises during testing. (Remote)
• Network Device Setup

3. Technical Support

• To address and resolve technical issues.
• Back up, Restoration and maintenance of workstations
• VM ware installation and Virtual Machine Migration
• Setting VPN IP Sec
• Policy Set up
• IT device Hardeneing

4. Documentation and Compliance

• To maintain detailed and accurate documentation of system designs, installations, and maintenance activities.
• To ensure all systems comply with relevant regulations and standards.
• To prepare compliance reports and documentation for audits and inspections.

5. Client Interaction and Training

• To assist with system training sessions for clients or end-users on system operations and best practices.
• To prepare system training slides for internal and external training.

6. Research and Development

• To stay up to date on the latest advancements in security technology and industry trends.
• To research and evaluate new products and technologies to enhance system capabilities.
• To develop and implement innovative security solutions to meet emerging threats and challenges.

7. Prepare Prove of Concept

• Prepare and conduct system testing for proposed solutions or contract requirements.
• To conduct Prove of Concept to client according to proposed solutions or contract requirements.

8. Quality Assurance

• To implement quality control procedures to ensure systems meet performance standards.
• To conduct regular quality assurance checks and audits of installation systems.
• To address any deficiencies and ensure continuous improvement of system quality.
• To adhere to safety and health procedures and rules documented in ISO45001.

9. Team Coordination

• To coordinate with Technical Team, IT and Service Team for the system readiness within Project timeline (Staging)
• To provide guidance and support to junior engineers and technicians.

10. Certificate

• CCNA

Understanding and interpreting engineering drawings (mechanical) for the quality inspection requirements which includes basic geometric dimension and tolerance (GD&T).

• Able to use various types of measuring equipment including CMM like caliper, micrometers , pin gauges & Thread gauges.
• Hands on knowledge of CMM ( Zeiss ), capable in CMM programming is a plus.
• Ensure in-process quality meets the specification and requirement stipulated in the work instructions or procedure
• Require to perform incoming, in-process inspection &, outgoing inspection using CMM. Maintenance of CMM and Inspection Room.
• Perform inspection of parts as specified including cosmetic appearance.
• Perform calibration and recording for Measuring Instruments.
• Capable of preparing Inspection Report. Familiar with Microsoft office software.
• To organize and assign the inspection jobs to QC inspectors according to delivery priority
• To instruct and advise the QC inspectors the best quality inspection methods and measuring equipment used
• Conduct root cause analysis on rejects and work with programmers, process planners and production on corrective actions.
• Ensure timely resolution of quality issues, corrective actions and preventive actions and all quality rejects are traceable to the person who made the rejects
• Prepare and maintain inspection and test plans/reports for the products and projects according to customers’ requirements and sign off quality reports.
• To conduct daily/weekly QC meetings on quality issues and delivery commitments
• Attend production/project meetings and present delivery commitment and progress status reporting
• Prepare and update quality performance charts and records
• Collect, organise and review quality records in accordance with QMS procedures, customers’ requirements and company's quality management systems and standards

Skillsets desired:

• Involved in the proposal, design and implementation of automated conveying systems,
• Knowledge on warehouse management systems, materials control systems, P.L.C. is advantageous,
• Past experiences on AMR, AGV, robots, vision system is advantageous,
• Must be able to draft technical drawings using AutoCAD or Solidworks (or equivalent),
• Able to present ideas and articulate clearly,
• Project management experience is a plus,
• Sales experience in engineering industry is advantageous,
• Hands-on, can-do attitude,
• Neat, well-organized attributes with pleasant personalities,
• Bachelor's degree in engineering preferred but not a must,
• Travelling required 50% of the time,
• Multi-lingual (at least 3)

• Develop strategies and action plans to achieve targets and potential sales opportunities for new business.
• Sales visits to maintain and expand strong relationships with existing customers, monitor progress of projects.
• Produce weekly sales activities report (sales visits vs quotations vs realised business).
• Any other work that is directly or indirectly related to any of the job duties.
• Be an excellent team player.
• ITE/Poly Diploma in Business / Engineering or equivalent.
• Prefer some experience in the Marine or Petrochemical industries.
• Strong customer relationship, good interpersonal and communication skills.
• Meticulous, analytical, proactive and organised.
• Must own a transport (Either Class 2 or 3 license)
• Good knowledge in Microsoft Office, especially in Excel, Outook Express, Powerpoint & Word.
• Salary negotiable based on experience.

Job Description:

• Supervise subcontractors’ works to ensure timely completion and quality standards of project.
• Monitor to ensure that utilities and M&E works executed are in accordance to statutory requirements, construction procedures and safe work practices.
• Liaise and coordinate between utilities agencies and construction team on excavation works, services diversion and reinstatement works near underground or utilities services.
• Work closely with utilities agencies to provide update of progress in construction site, utilities damages or unknown service.

Job Requirement:

• Minimum 5 years of engineering experience with Degree in Civil Engineering recognized by PE Board or qualification accepted to the Commission of Building Control as eligible for application as Resident Engineer or Recognized Degree in relevant field subject to the acceptance of the Engineer, and at least 2 years of experience in construction supervision for projects of similar scale and complexity.

Job Description:

• Responsible in preparing documentation including daily report, monthly progress report, progressive payments/claims, method of statement and work procedures to project manager.
• Responsible in overseeing drawings and plans and make sure they are updated to the clients and subcontractors
• Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems and prepares project status reports.
• Controls project plan by reviewing designs, specifications, drawings/plans, scheduling changes, and recommending actions.
• Assist the project managers or directors in project co-ordinations with related consultants and quantity surveyors.
• Coordinate and work closely by enforcing safety procedures, rules and regulations with safety personnel to ensure all government and safety regulations are complied.
• Conduct weekly or monthly meeting with sub-contractors to update the progress of work.
• Contributes to team effort by accomplishing related results as needed.

Job Requirements:

· Good interpersonal and communication skill

· Good organization skill

· Able to multitask

· Able to work under fast paced environment

Responsibilities:

· Plan, organise and set up site and sequential job planning for the smooth execution of projects to achieve cost, quality, timelines and customer satisfaction objectives.

· Manage construction activities and progress independently.

· Carry out resource planning for project such as site staff and workers, subcontractors and to ensure their effective deployment.

· Attend project meeting, project team meeting and updates on progress.

· Control materials, tools and equipment ordered and delivered.

· Manage all site staff and subcontractor schedule.

· Ensure adequate quality control measures either via on-site/off-site inspection and all completion/pre-handover inspections.

· Check the approved /correct materials are used within specifications/certifications submitted, recorded and approved by vetting Singapore Agencies.

· Proactively identifies changes in project scope and ensures appropriate measures are taken

· Administers Submittal Review process between Subcontractors/Suppliers and design team.

Requirements

· Able to understand electrical drawing, specifications and requirements skills and experience required.

· Degree in Electrical engineering or diploma holder with minimum 3 years of relevant experience.

· Worked in on A & A projects and/or Design and Build in various type of projects with different nature.

· Technically competent across the full range of electrical systems, ELV System, Project Lighting, Building Intelligent System and relevant skill set and competencies.

· Proven track records of successful project completion on time and on budget.

· Good interpersonal and communication skills to interact with all level of staff.

· Possess the relevant safety certifications like SCWSH / BCSS.

· Ability to coordinate and communicate with relevant site people to exec ute work Excellent time management and teamwork skills.

Tasks and Responsibilities

• Overseeing the regular maintenance and repair of shipyard facilities, including buildings, docks, cranes, and other equipment.
• Planning and executing facility improvement projects, such as building renovations, dock expansions, or utilities upgrading.
• Ensuring all facilities adhere to safety regulations and standards.
• Developing and managing budgets for facility maintenance and improvement projects.
• Identify opportunities to improve energy efficiency in shipyard operations and implement cost-saving initiatives.
• Ensuring compliance with environmental regulations and implementing sustainable practices.
• Identify potential risks to shipyard facilities and operation processes.

Job Requirements

• 2 years of experience in heavy industry, preferably Shipbuilding industry.
• Read technical diagrams and schematics for work planning and issue resolution.
• Diagnose or troubleshoot faults in the plants and machinery.
• Carry out electrical wiring / mechanical installation and technical maintenance works.
• On-site installation, system setup, calibration, testing, onsite repairs and preventive & corrective maintenance.
• Ability to identify and resolve issues related to facility operations.
• Experience in developing and managing budgets.

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Key Responsibilities:

• Assist in identifying and organizing requirements; apply usability procedures and principles effectively.
• Analyze, design, develop, and maintain products, contributing to their commercialization.
• Build prototypes and systems for testing; set up and conduct lab simulations.
• Design and implement tests, document results, and develop customer presentations.
• Provide timely corrective actions on defects to ensure product quality.
• Produce analyses and mathematical models; draw design conclusions based on findings.
• Conduct and participate in technical reviews of requirements, specifications, designs, and code; contribute to design standards and support design reuse.
• Create and maintain comprehensive product documentation; provide customer support through InTouch and deliver user training as needed.
• Assign, direct, and review the work of technicians; mentor junior engineers as needed.
• Continuously evaluate engineering approaches and assess associated risks.
• Author technical reports, papers, patents, and presentations; share expertise through Eureka and special interest groups; expand informal networks within the organization.
• Stay informed about novel technical concepts and market trends; adopt new practices to develop innovative, low-cost products.
• Maintain familiarity with company technology, organization, and business operations.
• Possess basic knowledge of materials, including metals and elastomers.

Qualifications:

• Master's degree in Mechanical Engineering.

Requirements:

• Minimum of 3-5 years of experience in the oil and gas industry.
• Basic knowledge of Electrical Submersible Pumps (ESP); field experience is a plus.
• Strong technical knowledge in mechanical engineering principles.
• Proficient in performing calculations related to stress, strain, pressure, and torque.
• Ability to work under pressure and meet tight deadlines in a dynamic environment.
• Excellent verbal and written communication skills; fluency in English is required.
• Self-motivated learner with the ability to work effectively both in teams and independently.

Requirements:

• BSEE or MSEE graduate from a recognized university;
• At least 7 years experience in Schematic Capture and PCB Layout Design using Altium Designer, or equivalent;
• At least 7 years experience in design-for-manufacturing in a manufacturing environment;
• At least 5 years experience in IPC-A-620 or IPC Class 3 or MIL Std;
• At least 3 years experience in embedded C programming.
• Experience in product development involving Environment Qualification Testing (EQT) and Environment Stress Screening (ESS) will be an added advantage;
• Electrical systems design and integration with a view of cable management for large format platform systems for high voltage or high current mobility;
• Design and troubleshoot multi-layered printed Circuit Boards
• Generate manufacturing standards Structured EBOM for manufacturing department;

Responsibilities:

• This is an Individual contributor position the requires hands-on board level design and system integration;
• Support design or product bring-up depending on if projects are ODM or OEM delivery model;
• Work closely with the R&D team (System Integration, Software/Firmware Engineers, Electrical Engineers, Mechanical Engineers)
• Identify Customer’s technical specifications.
• Plan the overall Architecture of the electronics board layout, systems layout, cable management for integration with mechanical and production department colleagues;
• Support Bid proposals, Lifecycle System Design Documentation, User Manual and User training, troubleshooting, failure analysis, field advisory role for site maintenance crew.

Job Description

• Be an architect for dormakaba Plant Singapore’s digital transformation in IoT based data acquisition, data analytics and data storage with visualization on current platform setup.
• Introduce new and upcoming technology trends in IoT, machine learning and use of sensors for impacting current business practices and select solutions through research partners and strategic suppliers.
• Work with stakeholders and see through the successful applications and implementation of IoT systems
• Provide guidelines on technology transfer to production floors in Plant Singapore.
• Act as a catalyst for awareness and knowledge transfer and promote the use of IoT practices in the plants.
• Take the lead in horizontal deployment of similar practices to Plants Malacca & Suzhou as well as to offices.
• Increase knowledge and awareness of IoT systems
• Lead in IoT pilot projects in Plant Malacca

Job Requirements

• Good experience in Industrial IoT use in business processes.
• Hands on experience with data acquisition, database selection, data analytics and setup.
• Good understanding of machine learning, data analytics and visualization.
• Excellent interpersonal skills.
• Degree in Computer Engineering, Computer Science or Engineering

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Review and advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents
• Prepare & Review HVAC calculation, specification and vendor's drawing
• Prepare & Review HVAC 2D SLD/DLD design & submission.
• Prepare & Review HVAC 3D model and production & site related drawings/supports.

Job Requirements

• Minimum 5 years of relevant work experience in the Machinery / HVAC newbuilding design in the Marine/ Offshore industry.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

1. To supervise, co-ordinate and organize daily site works activities

2. Project Manpower Arrangement, Site Coordinating with main-con.

3. Provide Technical and engineering support to site staff

4. Ensure site safe work procedure at work site

ITE or Diploma in Mechanical Engineering , Civil Engineering or Building Construction

Optional: Driving license class 3

we are a leading engineering company in the provision of facilities and services for hi-tech industries and other process related industries.

Our core business is providing total engineering solutions for gas supply systems, chemical dispense systems, ultra pure water distribution systems, waste treatment systems and other process systems in the pipe installation industry.

We are a specialist installation team for total facilities installation for industrial factory since 1997. Stainless steel orbital weld for UHP gas line, Food and pharmaceutical industries. PP, PVC, PVDF and PE systems installation for chemical, waste treatments systems.Esc.