Responsibilities:

• Understand the Project & Client’s Contractual requirements and scope of work. Clarify scope of work and supply to form the contract basis with Client.
• Support Project Management Team on Process deliverable schedule updates.
• Preparation of Process Philosophies not limited to Control and shutdown philosophy, Preparation of Isolation philosophy, Sparing philosophy, P&ID philosophy, and Vent, Relief, and Flare load calculation philosophy
• Responsible to prepare Development of Process Simulation Heat and Mass Balances (H&M Sheets).
• Responsible for preparation of Process Flow Diagram (PFD), Utility Flow Diagram (UFD) and Piping & Instrumentation Diagram (P& ID), Cause and Effect Diagrams and Safe chart
• Perform Equipment Sizing Calculations (Separators, Vessels, Storage tanks etc.), Line Sizing Calculations and Hydraulic Analysis and Flare Network design
• Responsible for preparing and reviewing technical queries and Assist Lead engineer conclude TQs with Client.
• Perform process studies like Dynamic Depressurization study.
• Preparation of reports, not limited to Process System design report, vent and drain report, Utility summary.
• Preparation of Process datasheets for Mechanical Equipment and Instruments.
• Co-ordinate with the other disciplinary departments in terms of process inputs.
• Responsible for Inter disciplinary checks and provide input to other discipline engineering deliverables like Mechanical Equipment List (MEL), Electrical Load List, Topsides Weight report, Mechanical and Instrument datasheets, other discipline critical philosophies, etc. as required.
• Review Vendor documents and provide comments to ensure the vendor design is in line with the project requirements.
• Responsible for updating Third Party Specialist, Process & Safety studies, including follow through of all such studies (review study reports, attending workshops, etc.)
• Assist Lead engineer for managing interface with hull and marine systems such as Cargo, Utilities, etc.
• Provide input to Operating manual, Pre-commissioning and commissioning manual.
• Attend project meetings as required (intra-discipline; Client, inter-discipline, SCM and Sub-contractor / vendor / 3rd Party) to assist lead engineer to address / clarify engineering issues and progress; and follow-through with meeting actions.
• Assist Lead engineer for identifying all Client's comments and communications, to ensure Client's comments / requirements are implemented, as well as feedback to Project Management and Commercial team, raise trends / potential change orders, as necessary.
• Assist Lead engineer for project process engineering support through after Engineering kick start through Detail Engineering / As-Built Engineering / Pre-Commissioning and Commissioning / Warranty Test Run, as required and as per project requirements.
• Responsible for process design data collection, analysis and maintenance to support project feasibility studies, preparation of tender/ construction documents as well as basic and detailed design drawings
• Assembles process design engineered submittal manuals/ booklets including drawings, schematics, documents, reports, calculations, etc. and provides copying support for contractors/ customers
• Liaises with package engineer to obtain updated information, when required and maintains process design submittal filing system in the engineering reference library
• Prepares process design project training manuals and owner’s manuals for on-site training to contractors and customers
• Monitors and follows up changes updated by junior team members on the operational process project drawings and records as well as the lessons learnt compiled during project execution

Requirements:

• Bachelor’s degree in chemical engineering, or related engineering disciplines
• 10 years of design working experience in Offshore industry
• Experience in FEED and EPC engineering, preferable in FPSO industry
• Able to multi-task and able to work in a fast-paced environment.

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is a Singapore based Medical Devices Manufacturer. Due to their current expansion plan, they are looking for a Process Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the West Area.

Duties of Process Engineer:

• Resolve worker issues in coordination with management.
• Supervise daily operations, ensuring machine schedules, production targets, and raw material management meet company goals and customer needs.
• Train new employees on equipment use and safety or assign them to experienced workers.
• Review work orders and reports to prioritize tasks and achieve engineering goals.
• Maintain ISO9001 and GMP documentation to ensure product compliance.
• Uphold workplace safety and housekeeping standards.
• Implement quality and process efficiency improvements.
• Ensure compliance with ISO13485 standards.

Requirements:

• Min Diploma in related disciplines with 1 - 2 years working experience
• Good understand about ISO13485 is highly prefered
• Comfortable with rotating shift with 6 days work week

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• Recruitpedia Pte. Ltd.
• EA License No: 19C9682
• EA Personnel No: R2198636 (Oh Puey Xin)

Main Responsibilities:

• Responsible for guiding the completion of relevant oil and gas process design work for offshore and onshore modules according to the specifications; such as completing PFD and PID calculations;
• Responsible for guiding the process calculations, physical and thermal balance calculations, equipment selection calculations, instrument selection calculations, etc. of the project; determine the process specifications and technical requirements, and prepare process tables and data tables;
• Responsible for guiding the preparation of process description documents;
• Responsible for guiding the participation in project HAZOP, HAZID, SIL and other safety analyses;
• Responsible for guiding the proofreading and review of finished drawings;
• Responsible for guiding the professional training within the department;
• Responsible for guiding and cooperating with the department manager to complete the bidding work;
• Responsible for guiding the analysis and interpretation of bidding documents, project specifications and analysis reports;

Requirements:

• More than 20 years of relevant professional work experience
• Familiar with the design and technical management of offshore and onshore oil and gas production facilities, and familiar with relevant domestic and foreign specifications, standards and common industry practices in the oil and gas industry;
• Proficient in process design software such as HYSYS, FlareNet, PipePhase, and office software such as Word, Excel, PowerPoint, etc.
• Good command of English
• Strong work coordination ability.

Interested candidates may email their resumes indicating qualification, details of past/current work experiences, present and expected salaries and reasons for leaving past/present employers to [email protected]

Your Job

Koch-Glitsch, a Koch Engineered Solutions Business, is seeking a dynamic Process & Sales Engineer to join our team in Singapore. This role focuses on projects across South-East Asia, North Asia, China, and Oceania, and is part of our Phase Separation team, dealing with mist elimination and liquid-liquid separation. We are looking for a technically adept and commercially savvy engineer with 2-4 years of experience. The position offers a balanced mix of technical (70%) and commercial (30%) responsibilities, providing a comprehensive and rewarding career opportunity.

Our Team

As a Process Engineering and Proposal Development Specialist, you will support projects across the APAC region and collaborate closely with country managers to drive aftermarket sales in Southeast Asia. This role is supervised by the APAC Product Leader based in Singapore; and involves collaboration with country managers across Asia.

What You Will Do

Process Engineering & Proposal Development (70% of role)

• Craft technical and commercial solutions tailored to customer needs.
• Analyze customer material requisitions and specifications.
• Select and pre-design equipment, performing hydraulic calculations/simulations.
• Estimate costs and develop quotations.
• Engage in technical clarifications, including negotiations and meetings with customers.
• Update and revise quotations as necessary.
• Write technical agreements for contracts, particularly for the China market。

Commercial Activities (30% of role)

• Partner with country managers to enhance sales and market presence for phase separation products in Southeast Asia.
• Oversee aftermarket opportunities for customers in South-East Asia.
• Collaborate with country managers to grow the aftermarket business.

Who You Are (Basic Qualifications)

• Customer focus and ability to build relationships with customers.
• University degree in a related field (preferably chemical engineering or similar), and 2-4 years of work experience.
• A creative and out-of-the-box thinking mind, essential when working on retrofit projects.
• Organization skills and ability for multitasking in a fast-paced work environment.
• Maturity, pragmatism, self-sufficiency, and high team spirit are essential qualities to succeed in this fast moving, dynamic environment.
• Prepared to travel within the APAC region (up to 25%).
• Experience with basic CAD modeling (AutoCAD or Inventor).
• Proficient in Mandarin to better serve our Mandarin-speaking customers.

What Will Put You Ahead

• Experience in similar roles with EPCs or other equipment suppliers.
• Capabilities on cost definition development.
• Familiarity with the different business cultures across APAC.
• Experience in Oil & Gas.
• Process simulation capabilities (e.g., with SimSci Pro-II or MySep).
• Experience with Computational Fluid Dynamics (CFD).

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Koch Engineered Solutions (KES) specializes in process and pollution control equipment and digital technologies to help industries reduce emissions, save energy and get the most from their resources. From pollution control to advanced filtration, we’re focused on providing customers with products and solutions to help them optimize, transform and succeed. Industries we serve include refineries, chemicals, municipalities, pharmaceutical, pulp and paper, food and dairy, utilities and automotive.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Our client specializes in high-precision CNC machining and custom manufacturing. Due to business needs, they are now recruiting a Welding Process Engineer to be part of their Welding Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Welding Process Engineer:

• Design and create welding procedures, specifications, and jig fixtures.
• Perform TIG welding and have knowledge of orbital welding (preferred).
• Introduce and implement advanced welding technologies and techniques.
• Estimate costs, resources, and timelines for welding projects.
• Train welding personnel on techniques and safety protocols.
• Maintain comprehensive records of welding procedures, inspections, and certifications.
• Develop and uphold Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).

Requirements:

• Diploma in Mechanical Engineer
• Possess Certified Welder Inspector (CWI) is an added advantage
• 3 years of relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Mandatory Skills

Windows 2016 Server

Windows Server administration

Installing, configuring, and maintaining Windows Servers

Expert knowledge of Windows troubleshooting

Preferably certified in Microsoft Certified Systems Engineer (MCSE), Microsoft Certified Systems Administrator (MCSA), ITIL or equivalent.

Preferred Skills

Windows Server 2019, Red Hat Enterprise Linux (RHEL)

Job Summary:

We are seeking a highly skilled L3 Cisco ACI Engineer to join our team on a 12-month contract. The ideal candidate will have in-depth knowledge of networking technologies, including SDN, and hands-on experience with Cisco ACI. You will play a crucial role in providing onsite support, troubleshooting, and designing network infrastructure for our clients.

Key Responsibilities:

1. Client Support: Provide onsite technical support, including troubleshooting, configuration, design, and escalated problem resolution.
2. Project Collaboration: Serve as a key project team member, working closely with clients to analyze requirements, propose solutions, and consult on testing and deployment processes.
3. Technical Lead: Act as a technology expert, advising clients on system enhancements and proposing solutions based on industry best practices.
4. Vendor Management: Serve as the point of contact for client projects, interfacing with vendors to ensure the successful deployment of network infrastructure.

Key Requirements:

• Experience: 5-8 years of experience in network engineering, system design, and large-scale deployment, preferably in MNC environments.
• Networking Skills:Expertise in routing/switching technologies such as BGP, OSPF, etc.
  Hands-on experience with LAN switches (e.g., Cisco, Huawei).
  Proficient in designing/building complex LAN and large WAN networks.
  
• SDN Experience: Extensive experience with Software Defined Networking (SDN) solutions such as Cisco ACI, VMware NSX, or OpenFlow.
• Network Automation: Proficiency in network automation using scripting languages like Python or Ruby, and tools like Ansible, Chef, and Algosec.
• Network Security: Experience with network security tools, including Cisco firewall, Checkpoint, Palo Alto, Fortigate, and IDS/IPS.
• Content Networking: Experience with content networking technologies like F5, including load balancers.
• Network Management Tools: Familiarity with network management tools like ServiceNow and SolarWinds.

Preferred Qualifications:

• Cisco certification (CCIE, CCNP, etc.) is highly desirable.
• Experience working in complex, large-scale network environments, including global infrastructure projects.
• Familiarity with network security standards and best practices in data protection and privacy.

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities and Tasks:

You will work regularly with Micron’s Business Units to ensure solutions meet or exceed business requirements. You will be expected to suggest, promote, and leverage published standards to minimize environment complexity and ensure regulatory as well as license compliance. You will have the opportunity to travel to other Micron sites as well as technology conferences and trainings.

As part of your responsibilities, you will be required to:

• Supporting acquisition, installation, and administration of enterprise Data Storage & Backup environment.
• Solving, perform root cause analysis and identify data storage related problems
• Provisioning of data storage resources to servers and provide system security and access
• Providing data backup client installations & scheduling, backup policies setting, performance tuning, and fixing.
• Use management tools to analyze performance and identify bottlenecks or slowdowns and take appropriate action to resolve.
• Develop scripts to automate manual processes for operational improvement
• Planning, coordinating and upgrading components of the data storage as needed with software, hardware upgrades. Collaborating closely with vendors as needed in this process
• Provide engineering support for raised ServiceNow cases and drive closure within SLA.
• Upkeep service efficiency and end-user satisfaction levels through service SLA.
• Maintaining systems and update operational documentation to ensure that they are current.
• Provide regular and timely update of project status to the key business partners.
• Involving in projects to upkeep the computing environment to meet future demands.
• Participate in worldwide collaboration meetings to share on engineering efforts, technical challenges and breakthroughs
• Participate in 24/7 on-call rotation, major incidents and reviews (postmortems).
• Attend to level 2/3 user service requests and service restoration through ServiceNow (Incident Management)
• Work with vendors and team members to tackle issues related to the operations (Problem Management)
• Ensure assets are updated promptly in Asset Management system
• Ensure all changes to systems are recorded and accurately executed with approval (Organizational Change)
• Review the performance of systems and plan for lifecycle projects and future expansion (Capacity Management)
• Participate in Business Continuity Planning and DR strategy including detailing of DR procedures, and executing DR drills
• Maintain and review the DR documents on a periodic basis.

Requirements:
• Bachelor’s or Masters in Computer/ Electrical/Electronics Engineering/Computer Science/ Computing

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for Project Commissioning, Qualification and Validation Lead to join us on a permanent basis to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Develop the overall project C&Q plan/schedule, estimate the resources required, identify key roles and responsibilities and plan for C&Q staff on-boarding.
• Lead the generation of C&Q SOPs and validation documentation which include Validation Master Plan (VMP), System Level Impact Assessment (SLIA), User Requirement Specification (URS), Qualification Protocols (DQ, IQ and OQ) and traceability matrix for the project.
• Use Process Automation System for the commissioning and validation of process equipment.
• Interface with client personnel and outside vendors when necessary.
• Manage the overall CQ&V of facilities, utilities and equipment.
• Manage all facets of assigned validation projects while maintaining strong communication with client representatives on project status and assistance needed.
• Knowledge on Kneat is preferred.

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Description

• Position: Process Technician (Chemical)
• Well Established Japanese Manufacturing MNC
• Working hours: 8pm – 8am (Permanent Night Shift; Work 4 Days Rest 3 Days)
• Salary (commensurate with experience): Up to $2,200 + Shift Allowance + AWS + Performance Bonus
• Working Location: Joo Koon
• Island Wide Company Transport Provided
• Outpatient Medical & Dental Insurance Provided
• Duration: Permanent
• Industry: Manufacturing

Main Responsibilities:

• Assist in troubleshooting machine and process issues.
• Assist in operator training.
• Perform scheduled lab analysis for chemical baths monitoring.
• Perform machines scheduled.
• Assist engineers in various daily tasks, such as dispose on-hold lots and process monitoring.

Requirements:

• Minimum GCE “O” Level.
• At least 2 years of relevant experience in the chemical industry.
• Prior experience in manufacturing plants is an added advantage.
• Independent and self-driven individual.
• Team player with good interpersonal skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

• Salary up to SGD$4,000 Basic + $1,020 Transport allowances + Commission + AWS + Variable Bonuses

• Highly Reputable company

• Working location: West, Company transport pickup provided

• Monday to Friday, office hours

Responsibilities:

• Responsible to market a full range of industrial cleaning accessories & tools and cleaning equipments to corporate clients, focusing in the Oil & Gas industry

Requirement:

• At least 1 year of industrial sales experience
• Experience or knowledge in cleaning equipment or water jetting is a plus
• Proficient in Chinese to liaise with Chinese speaking counterparts

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02c4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Tel: 6950 9757

Job Info:

• Salary: Basic up to $3500 + AWS + VB
• Working Hours: Monday - Friday (8:30am - 5:30pm)
• Location: Jurong East
• MNC
• Security System company

Job Scope:

• To research and develop new products and services
• Research competitors' products and evaluate their detailed functions
• Conduct market research on security systems in the ASEAN region
• Collaborate with Japan HQ R&D and China R&D center for product development
• Survey existing and future infrastructure, including electrical power and telecom networks, to ensure product compatibility
• Provide field technical support by visiting clients to check and maintain CCTV surveillance systems
• Assist in obtaining technical certifications for new and existing products in various countries
• Design and develop test plans for security alarm systems, CCTV systems, and access control systems, adhering to industry standards
• Perform rigorous testing of system components such as control panels, sensors, cameras, access readers, and communication devices
• Simulate real-world security scenarios to identify and address potential vulnerabilities
• Maintain detailed test records and reports for future reference
• Analyze test results, troubleshoot system malfunctions, and document findings
• Collaborate with manufacturers or distributors to resolve issues and optimize system performance
• Provide technical support to internal teams across the ASEAN region
• Conduct in-depth research on emerging security technologies and their potential applications
• Analyze market trends and customer needs to identify opportunities for new product development
• Research standards like SS558, EN, and IEC for ASEAN countries
• Stay updated on the latest advancements in security technologies and testing methodologies

Requirements:

• Minimum qualification Diploma in Electronics
• Minimum of 2 years of experience in security system testing, preferably with exposure to alarm systems, CCTV systems, and access control systems
• Familiarity with testing methodologies and tools used in security system evaluation
• Strong understanding of electronic security principles and operation of various security system components
• Proficiency in basic IT knowledge is required
• Proficiency in technical documentation and reporting
• Ability to conduct presentation for internal customers and management
• Entry level with relevant internship experience is welcome

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Ian Gan Zhi Shen | EA Personnel No.: R21102913

JOB RESPONSIBILITIES
• Design plastics or injection-mold fabrication processes.
• Create and improve injection-mold machinery.
• Analyze manufacturing data and suggest improvements.
• Analyze production and machinery line.
• Ensure quality output of membrane extrusion.
• Develop and design engineered plastic parts, insert molded parts and assemblies.
• Interact with internal customers, suppliers, and internal resources.
• Establish the parameters for an optimal molding environment.
• Design necessary components.
• Ensure environment to make plastics is appropriate.
• Analyze quality control and correct flaws.
• Work with other team members and vendors.
• Review existing validation reports.
• Create new reports and verifications.
• Analyze moldflow, part advisor analysis, finite element analysis, and stress/fatigue analysis on plastics.
• Design hot/cold runner molds.
• Develop 3D solid mold designs.
• Create water diagrams and hot runner wiring schematics.
• Prepare mold-filling simulations.
• Work with SQE to approve new supplier for molded parts, optimize the process at supplier’s manufacturing process.

WORK EXPERIENCE REQUIREMENTS

• Strong analytical and problem solving skills.

• Proficiency in data analysis and simulation software.

• Knowledge of chemical process engineering and safety regulations.

• Excellent communication and teamwork abilities.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for Deep Hole Drilling
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Benefit:

• 5 days Work
• Salary : $2000 - $2800
• Good Allowance, Bonus and AWS

Job Scope:

• Perform servicing, maintenance, and troubleshooting on equipment and system the at site
• Ensure the equipment is functionality
• Involve of Installation work for machine
• Partner with other technicians and engineer to perform daily operation
• Respond and attend to fault calls from client
• Ensure Timely check the equipment to ensure they are in workable condition
• Planning and undertaking scheduled maintenance

Requirement

• Possess at least NITEC and relevant field
• 2 years relevant experiences will be advantage
• Entry level welcome to apply, training will be provided

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Job Description

• Position: Electronics Engineer
• Well Established Singapore Based Electronics Manufacturing MNC
• Working hours: Monday – Friday (8:00am – 6:00pm)
• Salary (commensurate with experience): Up to $4,500
• Working Location: Serangoon North
• Outpatient Medical Insurance Provided
• Birthday Leave
• Duration: Permanent
• Industry: Manufacturing

Main Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers.
• Provide technical support in manufacturing and testing in product build.
• Provide technical support to QC in RMA issue.
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit.

Requirements:

• Minimum Diploma in Electronics Engineering.
• At least 2 years of relevant experience in the Electronics Manufacturing industry.
• Experience in product / project, PCBA manufacturing and testing.
• Technical competent to handle product/project manufacturing, transfers and troubleshooting.
• Experience in the manufacturing environment with ISO13485 & FDA is an added advantage.
• Able to liaise with customers on technical matters.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

Our Client is in the Oil and Gas. Due to their current expansion plan, they are looking for an Facilities Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibility

• Plan and coordinate infrastructure and equipment maintenance activities.
• Address work orders and manage maintenance schedules.
• Investigate and report breakdowns, identifying root causes and solutions.
• Review maintenance programs and suggest improvements.
• Identify inefficiencies in equipment and propose upgrades.
• Evaluate systems to enhance operational efficiency.
• Monitor infrastructure and asset life, implementing long-term maintenance plans.
• Prepare purchasing documents for parts and service contracts (e.g., cleaning, landscaping, pest control).
• Develop the Facility Asset Management Plan (AMP).
• Oversee facility expansions, systems upgrades, and quality control.
• Manage contractors, ensuring they meet company requirements.
• Ensure compliance with regulations and safety standards.
• Prepare technical reports and compliance documents.

Requirement

• Min Degree in engineering
• Min 3 years’ experience in Facility Engineering in Oil & Gas, chemical or Plant environment
• Good if have civil engineering back ground
• Knowledge in Building regulatory and engineering
• Experience in MS Office, SAP

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Desription

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Job Desciption

• Knowledge in AutoCAD
• MS Office
• Well versed and relevant design experience in at least one or more systems in telecomunication

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Responsibilities:

• Schematic capture, optimization and simulation.
• Develop efficient circuit designs and digital STD cell library meeting performance, power and area target.
• Study and invent new digital STD cell circuit architecture.
• Work with a layout designer to implement the layout of circuit.

Requirements:

• Bachelor's degree or above in Electronics, Computer Science, or related fields.
• Experience on high performance and low-power analog design.
• Experience on deep sub-micron process technology (12nm and below) taped outs.
• Excellent interpersonal and communication skills.

• Remuneration package: Up to SGD$4,600 Basic + AWS + Excellent Variable Bonus

• SINGAPORE Construction project

• Over 30 years of Reputable Engineering Company

Responsibilities

• Preparation of shop-drawing
• Attending Project meeting
• Manage sub-contractor
• Conduct site testing

Requirement

• Degree, Diploma or NITEC in Electrical Engineering or relevant
• At least 2 years of M&E Construction Project experience

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea