Job Responsibilities

• Supervise and manage on-site construction activities, ensuring adherence to the design and specifications.
• Liaise with project managers, subcontractors, and consultants to resolve site issues.
• Conduct site inspections to ensure work quality, safety compliance, and project standards.
• Interpret and implement technical drawings and design plans on-site.
• Monitor the use of materials and resources to ensure cost-efficiency.
• Prepare daily progress reports and documentation for the project management team.
• Ensure the implementation of safety protocols and monitor worker safety.
• Provide technical advice and support to construction teams as needed.

Job Requirements:

• Bachelor’s degree in Civil Engineering, Construction Engineering, or a related field.
• 2–4 years of experience in site supervision or engineering roles within the construction industry.
• Previous experience managing construction projects or working on-site is essential.

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

Location: Jurong East

Job Responsibilities:

• Establish TAC cases with principal vendor to resolve complex cases
• Be the main point of contact for both administrative and technical matters related to assigned tasks.
• Address customer complaints and provide solutions to resolve issues.
• Able to work flexible hours / after-office hour.
• Perform 24 x 7 standby duties,if required.

Job Requirements:

• Min 3 years of experience in Maintain, Migrate, Support and Troubleshoot Operating System such as Microsoft/RedHat/UNIX/LINUX.
• Experience in handling preventive and corrective maintenance requests such as version upgrade,patch etc.
• Experience in physical system and storage hardware, storage management software and storage networking including disaster recovery.
• Knowledge of registry, permissions, and drivers and software required.
• Understand basic WAN / LAN concepts and the TCP/IP protocol stack.
• Working experience with VM virtualization, Patch management, networking, security, and administration of Linux, RedHat or UNIX related Operating System.
• Working experience with physical server such as HPE Proliant and Dell Server.
• Knowledge of SAN, ISCSI, NAS, DFS, SMB, NFS, SFTP and other backup and restore technology.
• Certifications such as Linux, RedHat or UNIX related Operating System will be advantage.

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Summary:

Responsible for ensuring the smooth operation and maintenance of hotel facilities, systems, and equipment. Provide technical support and assistance to maintain high standards of guest satisfaction and safety.

Key Responsibilities:

• Perform routine inspections and maintenance tasks on hotel systems, equipment, and facilities.
• Conduct repairs and troubleshooting on electrical, plumbing, HVAC, and mechanical systems.
• Ensure prompt resolution of maintenance requests and work orders.
• Ensure compliance with hotel safety and security policies and procedures.
• Conduct regular safety inspections and report hazards or potential risks.
• Participate in emergency response procedures.
• Provide prompt and courteous assistance to guests with maintenance-related concerns.
• Ensure guest rooms and public areas are well-maintained and functional.
• Work closely with Housekeeping, Front Desk, and other departments to ensure seamless operations.
• Communicate maintenance schedules and updates to relevant teams.
• Maintain accurate records of maintenance activities, repairs, and inspections.
• Update and review maintenance schedules and procedures.
• Adhere to Hilton standards, regulations, and industry best practices.
• Ensure compliance with environmental and sustainability policies.

Requirements:

• Higher/Nitec in Electrical/Mechanical Engineering or related field.
• 2 years of experience in maintenance or engineering role, preferably in hospitality.
• Strong technical knowledge of electrical, plumbing, HVAC, and mechanical systems.
• Excellent problem-solving and communication skills.
• Ability to work independently and as part of a team.
• Flexibility to work varying shifts, including nights, weekends, and public holidays

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
• Designing and analyzing inspection and testing processes, mechanisms and equipment.
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks.
• Undertaking root cause analysis of incidents requiring corrective action.
• Ensure that corrective measures and deviation meet acceptable reliability standards and that documentation is compliant with requirements.

The Senior Engineer, Facilities Management (FM) supports the Head of Department to ensure the Facilities & Biomedical Engineering department functions efficiently and effectively to achieve NNI’s strategic objectives. The Senior Engineer (FM) is to ensure that renovation projects and infrastructure works, the day-to-day management of facilities, maintenance support services, operational processes and department KPIs are consistently kept to a high standard to support the institution’s operational requirements.

Job Requirements

The incumbent will be responsible for the following:

• Renovation projects, infrastructure improvement works and maintenance of NNI facilities.
• Ensure the timely maintenance replacement of all such stated assets, equipment and fixtures so that assets are sustained and optimized over their cyclical lives with minimal downtimes and costs.
• Interaction with TTSH Support Services especially in areas such as facility engineering, security & carpark and housekeeping.
• Prepare technical specification for ITQ/RFP and participate in procurement evaluation as subject matter expert for facilities management and facility development.

Requirements

• Degree in Engineering / related fields or equivalent + 4 yrs exp or Diploma in Facilities Management Engineering / related fields or equivalent + 10 yrs exp & demonstrated competency.
• Strong experience in business operations and project management especially in large establishment or in an institution preferably in the healthcare industry.
• Independent and resourceful.
• Good interpersonal and communication skills.

1. Resolves engineering problems by collecting and analyzing information; researching, analyzing, adapting, and modifying engineering techniques; recommending solutions; preparing drawings, schematics, and diagrams; evaluating components, materials, and suppliers; resolving design integration issues; developing specifications and safety standards; performing installations.

2.Verifies engineering applications by conducting tests and inspections; building and analyzing models and simulations;

3.Supports engineering projects by adapting and applying engineering techniques; conducting tests and inspections; preparing reports and calculations.

Responsibilities:

• Attend site meetings
• Supervise the construction of works in accordance with the project plan
• Co-ordinate layout plan, detailed drawings and M&E plan and prepare time schedule
• Arrange submission of plans to local authorities for approval and arrange inspections of work to kick off projects
• Work closely with customers; co-ordinate with internal staff; manage sub-contractors; determine material type and quantities
• Work closely with operations manager to manage project profit margin by carrying out price comparisons and managing operating costs
• Supervise, control and coordinate work according to project plan to ensure timely completion and high quality work.
• Conduct frequent sites inspections and meetings to ensure high quality work by sub-contractors and on time delivery of materials in accordance with schedule
• Enforce site safety procedures, identify and manage risks arising from the workplace or work process

Requirements:

• Degree /Diploma (or equivalent) in Mechanical / Electrical engineering
• Minimum 3 years experience in building services
• Proficiency in written and spoken English
• Excellent interpersonal skills with keen attention to details
• Self-motivated with a high degree of personal responsibility
• Able to handle projects independently and communicate well

Key Responsibilities:

• Manage the construction, testing, installation, and operations of client platforms to meet business needs and service levels.
• Troubleshoot platform-related issues and provide timely resolutions and updates.
• Handle service requests, monitor system performance, and maintain system configurations.
• Lead client platform implementation and upgrade projects.
• Conduct research and evaluation of platform tools and provide technical advice to customers and project teams.
• Manage system changes through change request processes and report status updates.
• Gather infrastructure requirements and perform analysis and design.
• Establish facility management standards to ensure consistency across teams.

Qualifications:

• Proven experience in platform management, system operations, or similar roles.
• Strong problem-solving skills and experience with troubleshooting platform-related issues.
• Solid understanding of platform implementation, upgrades, and management.
• Excellent communication and project management skills.
• Familiarity with change management processes and infrastructure design.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes

Hybrid Role - 3 days in office, 2 days working from home.

Position Summary:
We are seeking a proactive DevOps Engineer to join our team, focusing on deploying applications and managing cloud infrastructure. The ideal candidate will have hands-on experience with Kubernetes and Terraform, along with a strong understanding of AWS. This position is crucial for ensuring seamless deployments, optimizing our cloud resources, and supporting our development teams in an agile environment.

Key Responsibilities:

• Manage and oversee Kubernetes clusters, ensuring efficient deployment, scaling, and maintenance of applications. Assist developers with creating Helm charts and YAML configurations for smooth deployment processes.
• Design, implement, and manage CI/CD pipelines using tools such as GitLab, facilitating rapid and reliable application delivery. Integrate security measures into deployment workflows.
• Develop and maintain Terraform configurations to automate infrastructure provisioning and management on AWS, ensuring best practices in infrastructure as code.
• Collaborate with development teams to deploy and manage AWS resources, ensuring they align with application requirements and optimize cost efficiency.
• Implement monitoring solutions using the ELK stack, Grafana, and Prometheus to track application performance and resource utilization in Kubernetes and AWS environments, addressing issues proactively.
• Optimize AWS and Kubernetes costs by implementing efficient resource tagging and usage practices, ensuring high resource utilization.
• Create and maintain documentation for deployment processes and infrastructure configurations. Provide training and support to team members as needed.

Required Skills and Qualifications:

• Strong experience with Kubernetes and managing containerized applications.
• Proficient in AWS cloud services and best practices.
• Experience with Terraform for infrastructure automation.
• Familiarity with CI/CD tools such as GitLab or Jenkins.
• Basic understanding of Linux system administration.
• Experience with monitoring and logging tools, including the ELK stack, Grafana, and Prometheus.
• Excellent problem-solving skills and a collaborative mindset.

As Application Engineer, you are responsible for interfacing with customers and suppliers to specify and identify Cutting Tool product structures according to customers’ needs. Key to this process will be growing margin of the Cutting Tool product group or saving costs for customers by providing product application, technical and commercial support.

What will you deliver?

-Analyse customers’ existing methodologies, processes, and applications of metal-working tools and identify effective tooling solutions to drive productivity improvements for existing tooling or new product introduction.

-Source for alternate material sources, suppliers and manufacturers and negotiate pricing to achieve the targeted quality parts and productivity and reduce costs.

-Develop tooling operational steps for customers to achieve the planned productivity improvement targets.

-Set base prices by SKU, set and review pricing matrix discounts in accordance with agreed trading margins.

-Provide effective consultancy and product and technical training to internal teams and customers.

-Provide technical support to customers through troubleshooting of issues and working with suppliers for resolution

-Provide updated local market requirements and competitive market intelligence to internal teams.

-Support Vallen’s new business development with relevant expertise.

-Ensure world class customer service is achieved.

-Ensure compliance with Vallen’s sourcing policies and procedures.

Key Qualifications

-Diploma or Bachelor’s degree or diploma in Mechanical Engineering / Precision or related discipline.

-Profound knowledge in metal working and CNC cutting tool applications

-Good customer service skills

-Good analytical and problem-solving skills

-Effective communication skills

-Good team player with the ability to work effectively under deadlines

-Experience in vendor/suppliers’ management

-Experience in Cutting Tools and of relevant supply network.

-Understanding of financial concepts such as EBIT and working capital is a plus.

Responsibilities would include:

• Expand overseas sales market and increase sales revenue of company products (High Pressure Grinding Roller);
• Build and maintain effective customer relationships, understand customer needs, promote customer understanding of company’s product/service, and provide solutions;
• Ensure that customer problems are responded to and appropriately solved;
• Submit quotes and tenders in corporate with the relevant departments of headquarters as per customer requests;
• Work closely with supporting departments of headquarters, to coordinate customer interactions and ensure customer satisfaction.

Profile of ideal candidate:

• Diploma or above,prefer majoring in engineering ;
• 5+ Year(s) of sales experience ( prefer heavy equipment sales experience );
• Excellent business communication in English – verbal and written;
• Able to communicate and report to Mandarin speaking headquarters support team &Leaders ;
• Strong presentation skills and Negotiation skills;
• Good technical background and able to understand engineering drawings;
• Responsible and good teamwork player;
• Able to work under pressure;
• Need to travel overseas like Australia ,esouth America etc.

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• 2 years of experience advantageous in pedastrian overhead bridge, road, flyover construction
• Degree in Civil Engineering
• Accredited as a RE with IES

Responsibilities:

 1. Involved in SDLC processes like requirement

analysis, designing, coding , testing ,releasing, and providing

maintenance

 2. Fixed point auto code generation for production purposes of the system-level testing

 3. Experienced in writing and analyzing systems requirement

documents and usee test cases , preparing test logs and summary

reports

 4. Checking daily WIP calculations and updating the monthly machine status

 5. Identified and addressed technical issues in a timely and efficient manner

 6. Perform wire bond sub-module assembly, set-up, and calibration to meet the

in-house specifications

 7. Conduct testing strength of bonded connections, using testing equipment reports

 8. Designed, implemented, and tested modular components for printer

firmware

 9. Discovered, investigated, and found solutions for problems in OS and

compiler

10. Development on Linux Platform with Embedded C user side of RTOS

11. Assisted QA in developing meaningful testcases.

Excellent numeracy and analytical skills

12.In-depth scientific knowledge

13.Good problem-solving skills

14.Good communication and interpersonal skills

15.Good technical skills

16.Able to work and be stationed overseas

17.Flexible working hours.

Qualifications:

• Master’s degree in a related field
• Proficient in C++ and other object-oriented programming languages
• Analytical and logical thinking
• Strong problem-solving skills
• Ability to work without supervision

Technical skills:

•  Advanced Microcontrollers
•  Analog Circuits
•  Embedded Systems(Embedded C,Keil IDE,Proteus)

Responsibilities

· Focused towards working with customers to ensure smooth delivery of projects as part of our professional services team

· Work in tandem with pre-sales/solution architects and project manager, to identify and implement the most optimal cloud-based, hybrid or on-premises solutions for customers

· Ensure infrastructure and application performance, uptime, and scalability while maintaining high services delivery standard though a robust architecture design and implementation

· Involved in discussion with solution architects, customers, and external vendors/partners to define cloud strategy and technical solutions, including scope and implementation plans

· Assist with researching, evaluating, and recommending cloud related technologies, software, hardware and services as part of the total solution

· Deliver cloud, virtualization, and data storage related projects including architecture design, planning, installation, and configuration of cloud and on-premise infrastructure services

· Carrying out installation, configuration, monitoring, testing and management tasks associated within the cloud and on-premise infrastructure

· Drive automation of operational activities, health checks, capacity, and performance monitoring

· Troubleshoot and perform root cause analysis as well as implementing corrective/preventive actions when needed

· Responsible for day-to-day customer support and administration of cloud services as required if not involved in project implementations.

· Define and document best practices and operational procedures regarding solution deployment and infrastructure maintenance to ensure a smooth handover to customers or managed services team

· Perform periodic after-hours/weekend support when required

· Any other projects/duties as assigned by superior.

· Develop and maintain Terraform configurations for multi-cloud environments, Integrate Terraform with CI/CD pipelines for automated infrastructure deployments.

· Set up and manage Terraform Enterprise environments

· Knowledge on deploying terraform vault.

· Preferred to have HashiCorp Vault, including Setting up and managing Vault cluster.

· Configuring authentication methods (e.g., LDAP, AWS IAM)

· Implementing secret engines and policies

· Integrating Vault with applications for dynamic secrets

Core Technical Skills Required

· 4 to 8+ years of experience working as a DevOps Engineer.

· Devops, Terraform, AWS, Azure, CI/CD pipelines, Scripting ( Shell or Python )

· Must have hands-on experience in Terraform.

· Must have experience in Cloud - AWS and Azure

· Preferred to have experience in creating, deploying & managing Kubernetes clusters in AWS EKS, Redhat OCP.

· Good to have experience working & deploying micro-services with Docker, AWS EKS, Redhat OCP.

· Preferred to have experience with Python scripting & automation.

· Only Singaporeans

Requirements:

1. Minimum Bachelor’s degree in Mechanical Engineering or its equivalent.

2. Minimum 3 to 5 years of working experience in large scale building / civil projects with main contractor in Civil Construction Projects.

3. Good communication skills and ability to work as part of a team.

4. Autodesk Revit MEP experience will be an advantage

Job Description:

1. Oversees client & contractor coordination, attending to their needs in all aspects of M&E works.

2. Carry out project planning, design, material requisition, cost control, project supervision and documentation.

3. Oversees M & E works and coordinate with client’s representatives, consultants and sub-contractors to resolve any technical matters or site issues.

4. Review M&E tender documents and contract requirements including proposal for value engineering.

5. Develop and prepare designs and drawings from preliminary concepts, sketches and specifications.

6. Adhere to specific deadlines and deliver high-quality plans.

7. Attend MEP meetings.

8. Able to comprehend schematic/Technical drawing.

Be involved in the planning of civil engineering works.

· To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

· Any ad-hoc duties as assigned by the Manager.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

· The Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

. Flexible working hours

• Work together to define the project's scope with cross-functional teams that include design, development, and management of objectives and results.
• Create thorough project plans, budgets, and schedules, and make sure that the deadlines are followed.
• Effectively plan and distribute resources to guarantee that project milestones are met on schedule and within budget.
• To overcome project limitations and challenges, identify possible hazards and create mitigation plans.
• Encourage and uphold efficient and transparent channels of communication between team members, clients, and stakeholders to
• Ensure alignment with project objectives and give frequent project updates.
• Oversee and rank several projects at once, making sure that each one's particular needs and timelines are fulfilled.
• Organize frequent status meetings for the project and provide clients and senior management with progress reports.

Qualifications:

• Demonstrated expertise in project engineering or similar positions in the [Oil & Gas / Marine].
• Excellent organizational abilities and a track record of overseeing several projects at once.
• Outstanding writing and vocal communication abilities to successfully communicate both technical and non-technical
• Positivity, adaptability, and resilience in dynamic, fast-paced professional settings.
• Expertise in project management software and technologies.
• The capacity to solve problems, think critically, and make wise choices under duress.
• Collaborative team player has the capacity to collaborate with a variety of teams.

Job Responsibilities:

• Support the QC/QA Manager in daily quality control tasks for Ready Mix Concrete production, including mix design creation, raw material testing, report generation, and addressing customer complaints.
• Ensure all laboratory activities comply with ISO standards, project/site requirements, and internal protocols.
• Develop innovative concrete products and solutions to meet market demands.
• Stay updated with industry trends and innovations to plan QC/QA activities effectively.
• Maintain accurate records of all test data and reports.
• Ensure proper maintenance of laboratory equipment and facilities.
• Assist in maintaining Environmental, Health, and Safety (EHS) standards in the lab.
• Perform additional duties as assigned.

Job Requirements:

• Bachelor’s degree or Polytechnic diploma in Civil Engineering or Building Construction.
• Preferably 3-5 years of experience in the construction industry or a laboratory setting.
• Candidates with less experience will receive appropriate training.

Job Description:

• Analyse the needs of users, design, test and develop the software to meet those needs.
• To provide flexible solutions to integrated applications, to recommend upgrades for existing systems and programs, and to ensure any new product integrations are hassle free.
• Analyse the product requirements and implementation of feasible solutions to meet these requirements
• Ensure continued functionality of a program during maintenance and testing of software
• Document each aspect of a system or application as a reference for future upgrades and maintenance
• Revisit the development process to fix bugs or address client or consumer concerns, supporting existing data patches and enhancements.
• Work with the business analysts and users to ensure policy premiums are calculated as required.

Requirements:

• Minimum 5 years of experience in software development using Java/VP/MS
• Preferbly with experiences in the healthcare/insurance industry with functional knowledge

About our client: Our client is a manufacturer of offshore drilling and production equipment that is well-suited for use in deepwater applications.

About the role:

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
• Designing and analyzing inspection and testing processes, mechanisms, and equipment.
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks.
• Undertaking root cause analysis of incidents requiring corrective action.
• Ensures that corrective measures and deviation meet acceptable reliability standards and that documentation is compliant with requirements An Experienced Professional (P2) applies practical knowledge of job area typically obtained through advanced education and work experience.

About you:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum of 2-3 years of experience in quality assurance or quality control, preferably in oil&gas manufacturing sector.
• Strong knowledge of inspection and testing methods and procedures.
• Experience in conducting quality assurance tests and performing statistical analysis.
• Ability to conduct root cause analysis and implement corrective actions.
• Familiarity with quality management systems and documentation requirements.
• Strong problem-solving skills and attention to detail.
• Excellent communication and teamwork abilities.

Other:

• Work location: Tuas (pick-up transport provided)
• Work hours: Monday to Friday (8am to 5.15pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Design in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Design, you will:

Responsible for product analyzing, design for manufacturing (DFM), tool design 3D and 2D drafting, tool review and debugging.

The key responsibilities are as below:

• Construct mold design layout and conduct mold design review meeting.
• Design precision plastic injection molds in accordance with the requirements.
• Mold management and liaise closely with internal and external customers on matters relating to mold design.
• Preparation of detail bill of material and maintain thorough documentation of hardcopy and softcopy.
• Participate in the First-Off Tool review and assess the suitability of the tool for production.
• Performs other duties as assigned.

What skills and experiences are we looking for?

• Possesses at least a Diploma in Mechanical, Manufacturing, Precision Engineering, and/or any equivalent engineering discipline.
• 2 years of working experience in tool design, and/or any relevant experience.
• Experience in making LSR mold design, as well as packaging mold design is an advantage.
• Proficient in AutoCAD, Unigraphics and Microsoft Office Applications.
• Familiar with engineering drawings and GD&T.
• Ability to develop complex designs to the point of manufacture and release to production.
• Knowledge of plastics & elastomers.
• Team player with a good verbal and written skills.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Job Description

- Managing a part of the construction project

- Assist in technical advice and supervision for other members of the staff

- Planning day to day work program of the project progress

- Ensure projects meets agreed specifications, budgets as well as timescales

- Authorizing technical drawings and engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed property from start to finish

- Good communications skills