Responsibilities:

• Work with Systems Engineers and Test Manager to select the correct testing methods and ensure all requirements (hardware and software) are properly tested
• Assist in creation/update of test plans and verification test scenarios
• Assist in reviews, including but not limited to, Test Readiness Reviews, Technical Qualification Reviews, and Final Qualification Reviews.
• Ensure full traceability of deliverables and tests to project requirements, using appropriate requirements management tools (e.g. DOORS), and defining comprehensive scenarios for integration and test
• Set up and maintain environment (e.g. Operating Systems, network, virtual machines) for testing, including development/modification of automation scripts for setup, tests & updates.
• Install and configure required COTS (commercial off the shelves) systems for testing, including development/modification of automation scripts for setup, tests & updates, where feasible.
• Prepare the resources used for various test configurations, develop and implement verification procedures, compile results, manage test deviations and record all verification results.
• Analyze test/system/application logs and results, assist in troubleshooting and communication of variances/anomalies to relevant stakeholders
• Responsible for Factory Acceptance Test, Site Integration and Testing covering:Preparing of test cases
  Participate in the onsite activities including system installation, system configuration, pre-on-site test activities
  Participate and coordination of on-site test and commissioning activities with customer as witness
  Producing test report, raise Problem Report if required
  Responsible for Test report submission and getting acceptance from customer
  Coordination with external party for testing when required
  
• Ensure all Configuration (e.g. IP addresses, hardware serial numbers) and Change Management (CM) processes are properly followed.
• Prepare, setup, automate and conduct tests on system performance and stability, for both hardware and software
• Ensure that tasks are performed to the satisfaction of all external and internal customers

Requirements:

• Diploma in a relevant area of Engineering or related discipline
• Higher degree qualifications are desirable
• Strong passion in validation and testing
• Confident, outspoken and able to execute tasks with customers as witnesses
• Basic knowledge of running/modifying batch files/scripts
• Basic knowledge of operating system setup and configuration, such as Linux and Windows Server
• Basic knowledge on networking such as VLAN & routing configuration and basic network troubleshooting
• Strong oral and written communications skills, and ability to communicate with multiple overseas and local teams
• Able to work independently and under pressure

Desirable Experience:

• Experience dealing with IT hardware (server, network switches, storage, workstation)
• Experience with integration or testing of system, preferably till commissioning phase
• Familiarity with various system protocols, including but not limited to, TCP/IP, HTTPS, PLC integration and Modbus
• Passion for self-learning and implementing automation for tasks
• Knowledge of coding/scripting language for automation (e.g. Python, PowerShell)
• Good experience in test automation tools or implementing one from scratch (e.g. Jmeter, LoadRunner, Serial Port Tester)
• Experience in an Engineering role deploying/testing one or more large-scale solutions
• Experience in container-based technology such as Kubernetes, Docker, Containerd
• Knowledge on continuous integration/deployment (Ansible, Jenkins, Foreman)
• Knowledge on Cyber Security and know-how on hardening systems & infra
• Knowledge of Databases and their setup
• Strong experience with Linux, Windows, and virtualization (VMWare, Hyper-V)
• Strong experience in technical and engineering work on Security/Defence projects
• Membership of relevant professional organization, e.g. INCOSE, Institution of Engineers Singapore, etc.
• Cloud Technology, Virtualization or Network related certifications

• Position : Service & Project Engineer (Equipment) – No Experience Required!
• Location : Boon Lay
• Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM
• Salary (commensurate with experience): Up to $3500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided
• Duration : Permanent
• Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Client visits and also monitor installation progresses at job sites
• Supporting sales team in preparation of technical presentations
• Working with sales engineers to assess and determine equipment needs and system requirements
• Supporting colleagues and suppliers by providing sales support such as identifying problems for installed equipment

Requirements:

• Minimum Diploma in Engineering
• Be able to understand and learn the mechanical and engineering aspects of the systems
• Must posses Class 3 Driving License
• Minimum 1 year of experience or no experience is welcome too!
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Senior Consulting Manager (APAC)

Reg no.: R21101247 | EA No: 13C6684

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

· Recipe creation and optimisation for new R&D applications requirement.
- Preventive and corrective maintenance planning cum execution and vendor management.

· To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up

· Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).

· To set-up appropriate process and product control plan and out of control action plans (OCAP)

· Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

· Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering

· Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)

· Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)

· Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

We are looking for an experienced and motivated Data Engineer.

As a Data Engineer at Mighty Bear Games, you will play a crucial role in shaping our data analytics platform. Your expertise will drive the development, maintenance, and optimization of data pipelines, and you’ll work closely with cross-functional teams to transform data into actionable insights that propel our games to new heights.

We are an equal opportunity employer. We celebrate diversity and welcome applications from candidates from all walks of life and are committed to creating an inclusive environment for all Bears.

Your Responsibilities Will Include

• Design, construct, install, test, and maintain highly scalable data management systems.
• Ensure systems meet business requirements and industry practices.
• Build high-performance algorithms, prototypes, predictive models, and proof of concepts.
• Research opportunities for data acquisition and new uses for existing data.
• Develop data set processes for data modeling, mining, and production.
• Recommend ways to improve data reliability, efficiency, and quality.
• Collaborate with data architects, modelers, and IT team members on project goals.
• work closely with product owners and being able design architecture that will support analytics solutions for the long term

As a Successful Candidate, You Would Have

• Proven experience as a Data Engineer, Software Developer, or similar role.
• Expertise in data modeling, ETL development, and data warehousing.
• Experience with SQL and NoSQL databases, including Postgres and Cassandra.
• Proficiency in scripting languages such as Python or Ruby.
• Knowledge of big data tools like Bigquery, Looker, Hadoop, Spark, Kafka, etc.
• Strong analytical skills with the ability to collect, organize, analyze, and disseminate significant amounts of information with attention to detail and accuracy.
• Adept at queries, report writing, and presenting findings.
• Creative problem-solving skills and excellent communication.
• Passion for gaming and understanding of the gaming landscape.
• A genuine interest in games and/or web3 and experience working in relevant creative industries.

As a Bonus, You Would

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or a related field.

If you want to be part of a team committed to transparency and openness, then Bear Force One is the place for you!

We are always on the lookout for interesting people - even if your profile doesn’t meet the requirements fully, we'd love to hear from you!

Whether you’re new to the industry or have several years of experience, here are some pointers on things we look for at Bear Force One: http://bit.ly/MBG-HowToLandYourDreamGamesJob and when you’re ready, just click to apply!

Position : Sales & Project Engineer (Equipment) – Up to $4,000 Basic – Boon Lay - No Experience Required!

Location : Boon Lay

Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM

Salary (commensurate with experience): Up to $4,500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided

Duration : Permanent

Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Execute and follow through the sales plan set by the manager with the aim to expand the company’s customer base and ensure its strong presence in Singapore.
• Work as a team to gather information to submit tender.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Any other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Engineering
• Minimum 1 year of related experience or no experience is welcome too!
• Must posses Class 3 Driving License
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Senior Consulting Manager (APAC)

Reg no.: R21101247 | EA No: 13C6684

Responsibilities

• Understands the basic and essential specifications and requirements of the assigned project and Industry Standard, Classification Society and Regulatory requirements.
• Prepares the cable block diagram, interconnection diagram, loop diagram, I/O list and instrument index specific to the assigned project.
• Prepares engineering specifications (drawings, data sheets, etc) specific to the assigned project and validates them with the Senior/Lead Engineer or Project Manager before incorporating them in the RFQs.
• Evaluates with guidance from Senior/Lead Engineer, the basic items of all the bids received for I&C packages from various suppliers and performs a technical bid evaluation process against the project specifications.
• Prepares accurate documents and specifications timely to be provided to the successful vendors to enable the latter to execute their work and deliverables.
• Develops solutions to the less complex range of technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and proposing various options/measures using experience, precedents and professional references.
• Under supervision of senior/lead engineer evaluates the I&C requirement for mechanical packages in Marine & Topside, contributes to technical bid evaluation process, and ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications.
• Participates in Factory Acceptance test/Site Acceptance test to ensure that Instrument items function as per specifications. Where necessary, works with the suppliers/contractors concerned to rectify the issues & making sure that they comply with the specifications and are ready on time.
• Participates in meetings, reviews progress and helps address interface/implementation/execution issues, escalates where necessary to ensure that the project proceeds timely and smoothly. Follows up to implement continuous improvement or lesson learnt actions items.
• Provides technical/engineering support to Construction/Commissioning work at site, helps trouble shoot and follows up to rectify the gaps or problems. Where necessary, provides off-site support and advice.
• Guides junior Engineers.

Qualifications & Experience

• Bachelor in I&C Engineering
• 7 years of relevant working experience in I&C engineering in oil and gas sector.
• Comprehensive knowledge on functionality of FPSO

1. Candidate must be a Diplomo/Degree in Electrical (or)

2. Diplomo in Mechanical/Degree (or)

3. Dipolomo in Civil/ Degree (or)

4. Diplomo in Computer Application/Degree

5. He must have more then five years of working experience in their respective field.

6. He must have good interpersonal skills, Hard working and positive attitude

7. Attend to other ad hoc duties instructed by supervisor.

8. Perform daily routine work of company.

9. 6 days work week.

10. Must have class3/3c driving license

11. Must be able to handle the construction project Independently

Responsibilities

• Must know also well referred to as a machine Programming, Seeting, or tender, uses manufacturing equipment to shape metal or plastic components for products.
• operate, calibrate, and know basic maintain machinery, as well as inspect finished products to ensure quality work.
• Liaise with other managers to formulate objectives and understand requirements
• Estimate costs and prepare budgets
• Organize workflow to meet specifications and deadlines
• Monitor production to resolve issues
• Supervise and evaluate performance of production personnel (quality inspectors, workers etc.)
• Determine amount of necessary resources (workforce, raw materials etc.)
• Approve maintenance work, purchasing of equipment etc.
• Ensure output meets quality standards
• Enforce health and safety precautions
• Report to upper management
• Keeping abreast of advancements in engineering and production, and sharing knowledge with co-workers.
• Identifying, documenting, and reporting unsafe practices.
• Drawing up production schedules and budgets for projects.
• Scheduling meetings with relevant departments and stakeholders.
• Analyzing all facets of production and making recommendations for improvement.
• Obtaining any materials and equipment required.
• Oversaw mold setup/mold changes and adjusted processes to
• ensure product quality.
• Material Processing (PC, HIPS, ABS, Nylon GF,PPTF.POM,PPCP,PP)
• Oversaw production on 16 injection molding machines,
• maintaining lean manufacturing principles..
• Operated and supervised MILACRON (EQ&M) Series, ANGEL,
• HAITIAN, TEDERIC, and TON (80 to 2800) injection molding
• machines.
• Conducted analysis and improvement activities for new mold
• trials, resulting in enhanced product quality.
• Monitored and improved Overall Equipment Effectiveness (OEE)
• on the shop floor, achieving productivity gains.

Requirements and skills

• Bacheleor Degree in Plastic moulding Technology or Manufacturing Engineering
• Proven experience as production Engineering
• Deep knowledge of production management
• Understanding of quality standards and health & safety regulations
• Knowledge of performance evaluation and budgeting concepts
• Experience in reporting on key production metrics
• Proficient in MS Office and ERP software
• Outstanding communication ability
• Excellent organizational and leaderships skills
• Attention to detail
• Strong decision-making skills and a results-driven approach
• All Races Welcome
• Prefer to work in Night Shift also

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

Primary Purpose:

Manage and supervise the daily activities of the team members in accordance to the production specifications and requirements. Ensure that the team meets standard in terms of operation efficiency, and service uptime. Develop the capability of team members.

Job Responsibilities:

• Supervise a group of cameraman and guide them in all video technical set up. Review and update SOPs.
• Conduct annual review and assessment of team members training needs.
• Guide crew in camera operation (i.e. general camera system set up, angles, distances, movement) and overall operations concerning video, audio and electrical for TV production.
• Perform duty as Technical Producer for major production whenever necessary. Ensure production meets broadcasting standard. Anticipate problem and provide solution on complex issues.
• Provide contingency planning and ensure deliverable of production setup are adhered.
• Keep abreast of broadcasting technology development and industry standards and workflows. Offers recommendations for upgrades and changes to ensure operations are kept relevant and competitive.

• Diploma in Film Production or Electronics/Electrical Engineering or Audio related field.
• At least 10 Years of Ligting experience is preferred.
• Possess in-depth working knowledge of overall unit operations concerning camera, video, audio, lighting and electrical for TV Broadcasting.
• Possesses knowledge of camera systems, lenses and camera support equipment will be added advantage.
• Familiar with international broadcast standard, preferably ITU (International Telecommunication Union) and EBU (European Broadcasting Union) broadcast standard.

Job Description:

Mechanical Design on optical modules and photonics system

Job Responsibilities:

· Responsible for mechanical design

· sourcing for mechanical / electronics elements;

· Supporting the team on project activities,

· Maintain engineering documentation etc.

· Responsible for equipment set up and maintenance etc.

· Providing technical support to sales

Job Requirements:

· Min. Degree in Engineering (Optical/Mechanical/Physics/any equivalent).

· Min. 3 years’ experience in mechanical design

· Good at design software: autocad, solidwork etc.

· Good team player

This position is responsible for delivering billable network services by delivering superior technical solutions to all target customers, particularly in Security and network (LAN) solutions.

Responsibilities:

Ensure best practice is leveraged in providing the solutions to target accounts

Provide support to customers, particularly in Security products such as Firewalls, IPS, IDS (e.g. Palo Alto, Checkpoint, McAfee, Bluecoat, F5) products, transferring customers’ requirements into a solution based on Fujitsu solutions and services. Owns technical design from concept to subsequent implementation; responsible for design, configuration, testing and commissioning of solutions

Manage first level escalation of any deployment issues and problems. Note and escalate service development required to meet customer needs

Identify and create business opportunities for Fujitsu target customers and prospects

Participate in the tendering process and development of proposals in line with customer needs, liaising and qualifying with other colleagues as necessary. Supports in the development of customer SLAs.

Present technical solutions and services to customers both formally and informally as required with minimum support.

Stay abreast of technical issues, options and advancements within the internetworking industry relevant to the Fujitsu services’ portfolio

Provide a consistently high quality (billable or non-billable) technical service to existing and new customers ensuring that customer satisfaction is maintained or improved

Job Requirements:

A relevant degree with at least 3-5 years of experience as technical sales support in network environment and relevant experience in project implementation

CCNP certified a must, CCIE will be an added advantage

Good knowledge in network systems, communications interfaces protocols and diagnostic tools

Good experience on deploying security solutions such as Cisco ASA, FTD, Palo Alto, Checkpoint, Juniper, McAfee IDS/IPS, F5 and Other network security systems

Good knowledge of products related to Routing, Switching and Firewall

Experience with VMWare NSX V or T is a plus.

(We manufacture of EG POLYTHENE AND POLYPROPYLENE BAGS)

Responsibilities

• Evaluate manufacturing processes based on quality criteria, such as efficiency and speed
• Study production and machine requirements
• Develop and test effective automated and manual systems
• Design and install equipment
• Organize and manage manufacturing workflows and resources
• Integrate disparate systems (e.g. equipment handling, transport)
• Optimize facility layouts, production lines, machine operations and network performance
• Resolve issues and delays in production
• Find ways to reduce costs and maximize quality
• Train staff in new and existing processes
• Collaborate with other engineers, contractors and suppliers
• Ensure that manufacturing procedures follow safety and environmental regulations
• Upgrade systems and processes with new technology
• Operate and maintained injection molding machines, ensuringsmooth production processes.
• Conducted real-time troubleshooting to identify and addressmachine issues promptly.
• Collaborated with the maintenance team to perform preventive maintenance activities.
• Executed mold changes and set up machines for different production runs.
• Monitored and maintained product quality through regular inspections.
• Worked with production schedules to meet daily and weekly production targets.
• Implemented safety protocols and ensured a safe working environment.
• Trained new operators on machine operations and safety procedures.
• Recorded and documented machine parameters and production data.
• UNITED PLASTIC PRIVITED LIMITED |2022-2024 present | Injection molding Technician
• Oversaw mold setup/mold changes and adjusted processes to
• ensure product quality.
• Material Processing (PC, HIPS, ABS, Nylon GF,PPTF.POM,PPCP,PP)
• Oversaw production on 16 injection molding machines,
• maintaining lean manufacturing principles..
• Operated and supervised MILACRON (EQ&M) Series, ANGEL,
• HAITIAN, TEDERIC, and TON (80 to 2800) injection molding
• machines.
• Conducted analysis and improvement activities for new mold
• trials, resulting in enhanced product quality.
• Monitored and improved Overall Equipment Effectiveness (OEE)
• on the shop floor, achieving productivity gains.

Requirements and skills

• Bacheleor Degree in Plastic moulding Technology or Manufacturing Engineering
• Proven experience as production Engineering
• Deep knowledge of production management
• Understanding of quality standards and health & safety regulations
• Knowledge of performance evaluation and budgeting concepts
• Experience in reporting on key production metrics
• Proficient in MS Office and ERP software
• Outstanding communication ability
• Excellent organizational and leaderships skills
• Attention to detail
• Strong decision-making skills and a results-driven approach
• All Races Welcome
• Prefer to work in Night Shift also

Primary Purpose:

Manage and supervise the daily activities of the team members in accordance to the production specifications and requirements. Ensure that the team meets standard in terms of operation efficiency, and service uptime. Develop the capability of team members.

Job Responsibilities:

• Supervise a group of cameraman and guide them in all video technical set up. Review and update SOPs.
• Conduct annual review and assessment of team members training needs.
• Guide crew in camera operation (i.e. general camera system set up, angles, distances, movement) and overall operations concerning video, audio and electrical for TV production.
• Perform duty as Technical Producer for major production whenever necessary.
• Ensure production meets broadcasting standard.
• Anticipate problem and provide solution on complex issues.
• Provide contingency planning and ensure deliverable of production setup are adhered.
• Keep abreast of broadcasting technology development and industry standards and workflows. Offers recommendations for upgrades and changes to ensure operations are kept relevant and competitive.

Qualifications

• Diploma in Film Production or Electronics/Electrical Engineering or Audio related field.
• At least 10 Years of Ligting experience is preferred.
• Possess in-depth working knowledge of overall unit operations concerning camera, video, audio, lighting and electrical for TV Broadcasting.
• Possesses knowledge of camera systems, lenses and camera support equipment will be added advantage.
• Familiar with international broadcast standard, preferably ITU (International Telecommunication Union) and EBU (European Broadcasting Union) broadcast standard.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to ensure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

- Looking for a reliable, agile, and professional individual.

- Able to understand, look ahead, plans the production schedules etc, and provide day to day supports in materials / spare parts procurement, inventory and logistics management to ensure smooth Fab operations.

- Initiate, lead and provide day to day supports in all logistics needs and initiate material/spare parts procurements when required to ensure smooth Fab operations.

- Follow through all the orders initiated from the start of purchase till delivery. Ensure the orders are delivered are on time.

- Accountable for the inventories required to enable smooth FAB cleanroom operations.

- Work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.

- Employ critical thinking and put-up good initiatives to move forward towards systematic inventory digitalization.

- Ability to work in a multi-task environment.

Experience:

- Education: Diploma/Degree in engineering or supply chain discipline.

- Process strong customer service mind-set with excellent interpersonal and communication skills.

- Preferably some knowledge of supply chain analytics, experiences in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.

- Fresh graduate can be considered as well.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to ensure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

- Looking for a reliable, agile, and professional individual.

- Able to understand, look ahead, plans the production schedules etc, and provide day to day supports in materials / spare parts procurement, inventory and logistics management to ensure smooth Fab operations.

- Initiate, lead and provide day to day supports in all logistics needs and initiate material/spare parts procurements when required to ensure smooth Fab operations.

- Follow through all the orders initiated from the start of purchase till delivery. Ensure the orders are delivered are on time.

- Accountable for the inventories required to enable smooth FAB cleanroom operations.

- Work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.

- Employ critical thinking and put-up good initiatives to move forward towards systematic inventory digitalization.

- Ability to work in a multi-task environment.

Experience:

- Education: Diploma/Degree in engineering or supply chain discipline.

- Process strong customer service mind-set with excellent interpersonal and communication skills.

- Preferably some knowledge of supply chain analytics, experiences in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.

- Fresh graduate can be considered as well.

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Your duties include but not limited to :

• Understand product usage and confer with customers to determine system requirements
• Establishes new accounts & services existing accounts by calling & travelling to visit potential clients
• Preparations of proposals, deliver sales presentations, and negotiating terms of sale.
• Interpret tender documents & drawings.
• Attend site meeting, factory acceptance test and site inspection whenever required by customers.
• Liaise/ work closely with project team, manufacturer, customer, supplier or other product vendor.
• Work on after-sales support services and provide technical back up as required.
• Partner with sales team to plan, prepare and execute on strategic deals to ensure sales targets are met
• Supporting marketing by attending trade shows, conferences and other marketing events.
• Follow-up on overdue accounts if any
• Supply management with reports on customer needs, problems, interests, competitive activities, and potential for new products and services

Responsibilities

• Work with R&D on both product actualization and development, and the manufacturing team closely on the related sections such as work Instructions, customer/internal defects, etc
• Improve process capability/defect reduction/throughput improvement for high volume manufacturing using statistical process control, DOE techniques, data driven decision making and systematic problem-solving skills.
• Provide detailed engineering analysis and documentation to support process deployment, transfer and ramp into volume manufacturing.
• Collaborate with Development, Quality, Manufacturing, and other departments as needed to address issues with and set appropriate specifications for MEMS supplied products.
• Define process flows, develop new processes, and ensure successful transfer of new technologies to manufacturing.
• Identify and implement corrective measures for MEMS supplied product variation.
• Defining process flows, develop new processes and drive continuous process improvement efforts to maximize product yield.
• Provide technical expertise and assistance to other engineers and support personnel.
• Applying risk assessments in support of event analysis, including containment decisions, root cause analysis and development of permanent corrective actions
• Experience in physical properties testing, failure analyses and techniques
• Promptly attend to, and resolve, manufacturing issues that occur over the course of Operations’ shift work
• Provide first-line support to the manufacturing technician team in response to any unexpected outcomes or out-of-spec events

Requirements

• Bachelor's Degree in Engineering (Mechanical or Electrical/Electronic) or equivalent.
• Knowledge in Excel VBA, Python, C++/C# programming will be an advantage.
• Strong troubleshooting and analytical skills.
• Possess strong written and verbal communication skills.

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• To keep abreast of the current state-of-the-art motion control algorithms
• To develop a variety of trajectory tracking algorithms (path and speed profile)
• To account for vehicle dynamics subject to variable loading of towed trailers
• Software design and development

Required experience

• Ideally 1+ years of experience in control research domain.
• Bachelors in computer science, Robotics, or related fields
• Strong familiarity with control systems, robotics, autonomous vehicles
• Strong familiarity with trajectory optimization
• Experience with research in robotics or related fields involving realistic agent motion
• Experience with C++ in a Linux environment
• Flexible problem-solver

Bonus experience

• Experience with ROS or other similar middleware
• Experience with data structures, object-oriented programming
• Experience with real world robotics deployment
• Experience in data-analysis
• Experience in simulation

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Job Description

Industry/ Organization Type: Marine Spare Parts & Navigations and Communications Supplier/Service

Position Title: Marine Service Engineer

Working Location: East – Tampines

Working Hours: 5 days (Mon-Fri: 9am - 6pm)

Salary Package: From SGD 2000 Up to SGD 5000 + Bonus + On-site allowance

Duration: Permanent

Min. ITE in Marine or Electrical/Electronic Engineering

Min. from Frash gratuate to 2 years of working experience in the Marine industry

Hands-on experience on Radar, Gyro, GPS, ECDIS, VDR, VHF, Sat C, MF/HF, AIS is a plus.

Those with sailing experience(Ship ETO) are welcome to apply.

Please apply through ANY of the following methods:

Submit your application by clicking the APPLY button;

Email your resume to Job(at)[email protected] and [email protected].

Two Positions available. Above positions are for Singaporeans only Foreigner need not apply.

PRODUCT AREA

Whether it is paying online with Autofill, using tap and pay in stores, or using the Google Pay app, the Payments team at Google is focused on making payments simple, seamless, and secure. In addition to consumer payment technologies, the Payments team also powers the money movement between Google and its consumers and businesses.

JOB DESCRIPTION

Google's software engineers develop the next-generation technologies that change how billions of users connect, explore, and interact with information and one another. Our products need to handle information at massive scale, and extend well beyond web search. We're looking for engineers who bring fresh ideas from all areas, including information retrieval, distributed computing, large-scale system design, networking and data storage, security, artificial intelligence, natural language processing, UI design and mobile; the list goes on and is growing every day. As a software engineer, you will work on a specific project critical to Google’s needs with opportunities to switch teams and projects as you and our fast-paced business grow and evolve. We need our engineers to be versatile, display leadership qualities and be enthusiastic to take on new problems across the full-stack as we continue to push technology forward.

Qualifications

JOB RESPONSIBILITIES

• Design and ship backend infrastructure features.
• Work closely with Product Management, User Experience, and User Experience Research teams to iterate in a novel and exciting product space.
• Work with collaborators and teams across Google.

MINIMUM QUALIFICATIONS

• Bachelor's degree in Computer Science, a related technical field, or equivalent practical experience.
• 3 years of experience in software engineering or related technical field.
• Experience in software development in Java, C/C++, Python, or Go.
• Experience collaborating within and outside of the team and across sites.

PREFERRED QUALIFICATIONS

• Experience in computer science, data structures, algorithms, and software design.
• Experience in payments industry.
• Experience in backend infrastructure.