Responsibilities

• Lead a team of construction engineers and supervisors for the safe, efficient, and quality execution of construction works assigned.
• Responsible for the HSES and quality aspects of the work within assigned areas and for ensuring contractors complete their work in accordance with the project working program.
• Ensure that all construction contractors’ supervision and manpower are instructed and comply with all aspects of Health, Safety, Environment and Security (HSES) policy, site regulations, permit to work procedures and instructions and Client requirements
• Conduct routine checks and inspections of works on site to ensure compliance with authorities' and client’s requirements.
• Ensure Plant is constructed to the drawings, specifications, applicable standards, and good construction practices and schedule and maintain records for final documentation.
• Monitor progress with schedules and provide updates
• Comply with the company's construction methods, procedures and practices in all respects, particularly those relating to quality assurance, safety, personnel, and industrial relations; where these are found to be inadequate immediately report the deficiencies and suggest solutions.
• Check the daily ptw system and make sure all activities shall be covered by ptw system
• Supervise multi-disciplinary construction project site team in accordance with requirements specified in the contract documents
• Work closely with construction and engineering management on coordination of inter / intra contract activities.
• Read the ITP (Inspection and test plan) of each activity and make sure construction quality is met for each activity.
• Installation of equipment and structure as per the plan.
• Supervise equipment installation and piping work performed by construction sub-contractor and ensure compliance with established the construction activities.
• Organizing for preparation of piping systems for testing based on the test pack limits specified in the approved test packs.
• Attend final walkthrough of completed piping systems and verify clearing of all punch list prior to mechanical completion

Requirements

• Degree / Diploma in Engineering
• 10 years’ experience in the process and/or utility/power construction industry.
• Experience in most areas, including field engineering, project control, quality control, administration of contracts and subcontracts, craft supervision, field superintendence, safety, labour relations, maintenance, turnarounds and outages, commissioning and other applicable positions and functions.
• Familiar with steel structural, equipment ( pump, water system , mechanical system installation, testing (T&C), piping system, plant construction. Understand with construction sequence and schedule and interface with all trade.
• Have knowledge and familiarity with the methods, practices, equipment, codes, documents, drawings, specifications, requirements, functions and control systems of the engineering and construction business.

Work location: Tuas Nexus

Job Description

• Assists in preparing the Work Plan.
• Delegates jobs to supervisors and plan the manpower required for the jobs in accordance to the budgeted man-hours.
• Resolves problems encountered and manage the coordination between the different trades
• Raises or approve Issue Passes for materials and equipment required for the jobs accordingly
• Monitors the work of sub-contractors to ensure that quality and workmanship conform to company standards.
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements.

Job Requirements

• A degree from a recognized tertiary institute.
• At least 2 years of relevant working experience.
• Possess positive and willing to learn attitude.
• Good analytical and problem-solving skills.
• Possess good interpersonal and communication skills.
• Able to multi-task and able to work in a fast-paced environment.

Job Description

1. Assures Product quality, production processes, documents maintenance, production environment complied to our strict HQ standards and local government requirements.
2. Maintains product quality by enforcing quality assurance policies and procedures to ensure conformity with HQ specifications, government and industry standards.
3. Oversees the workplace health and safety issues of the company.
4. Negotiate with suppliers on raw materials as well as packaging materials procurement.
5. Responsible for company’s Production performance as well as Product Quality.
6. Investigate customers’ complaints on quality issues with the local Production and QC team.
7. Investment considerations and budgeting for improving working environment, quality and production efficiency.
8. Management of repair correspondence for manufacturing machineries and plant facilities.

Requirements

1. At least 5-8 years experience in production management in a food manufacturing industry preferably in a Management role
2. Degree holder or higher
3. Good knowledge of biscuits manufacturing processes and chocolates making processes.
4. Good knowledge of FSSC & ISO standards
5. Knowledge of safety requirements and legal standards.
6. Able to speak, read and write Japanese as the role requires frequent communicating and reporting to Japan HQ

To apply, please kindly email your updated resume to [email protected].

We regret that only shortlisted candidates will be notified.

However, all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Lim Yoke Hui

EA Personnel Registration Number: R1433821

EA License no.: 07C5771

Job Description:

Requires an expert with knowledge of a broad range of IT technologies.
* Proven 2years of experience as an IT professional.
* Knowledge of Linux/UNIX and/or Windows Server operating systems is essential
* Understanding of Nutanix prism, Microsoft HyperV and related virtualisation technologies
* A good knowledge of MS SQL
* An understanding of SAN, NAS and Veeam storage technologies including storage replication
* Maintain inventory and asset configuration documentation for network switches, servers and workstations.
* Ensure the implementation of IT Security System that are aligned of High Availability and Disaster Recovery
* Ensure network security, efficiency and availability for entire IT infrastructure.
* Experience of open-source software and the principals behind it. and using it
* Knowledge of capacity planning and performance measurement techniques
* Strive to learn and ability to interpret performance statistics, identify bottlenecks and translate application load projections into infrastructure utilization projections
* An understanding of Enterprise Security and IT risk management
* Some knowledge of programming languages and current software development practices such as Visual Stdio

Requirements:
- Diploma or Degree in Electronic or IT
- At least 2 years in related field
- Knowledge of VM, Microsoft Servers, Unix, VLAN and etc.
- Knowledge of server and desktop hardware troubleshooting and setup
- Strong analytical, problem solving and decision-making skills
- Ability to work Independently
- Preferable with CCNA

Job Responsibilites:

• Requisition fulfilment for raw materials, workshop tools and office supplies
• Generate purchase orders, oversea delivery schedules and maintain purchase records
• Manage suppliers, resolve discrepancies or quality issues on purchases
• Inventory management with workshop/storeman

Job Requirement:

• NTC/ Diploma preferably in Mechanical/Precision engineering
• Min. 2 years of experience preferably in Oil & Gas/engineering
• Excellent communication, negotiation and interpersonal skills
• Proficient in Microsoft Excel, SAP knowledge will be an added advantage

About the role

The National Senior Solutions Engineer is to be successful in gaining and retaining customers by offering industry leading solutions.

Job Responsibilities

You will be working with internal and external stakeholders to deliver these objectives include:

• To manage others in the development of successful customer solutions.
• To take the lead in major customer tender proposals, driving compelling logistics concepts.
• To drive innovation, introducing + implementing new concepts + technology while building on existing best practices.
• To present solutions to the customer as key part of the tendering process.
• To be the business partner for your management team when addressing solution queries from customers, as well as challenging the status quo + customers in a constructive way where needed.
• To manage partnerships with key vendors to optimize costing + lead-times.
• To support the development of others in terms of skills + knowledge levels, assuring high standards of compliance.

Job Requirements

To thrive and be successful in this role, you must have / be:

• More than 7 years of related industry and 3PLs logistics operations experience.
• Bachelor’s degree in Industrial Engineering, Logistics, Supply Chain Management, or a related field. Master’s degree preferred.
• Strong analytical and problem-solving abilities.
• Proficient of the end-to-end supply chain.
• Have knowledge & experiences with the ability to integrate technical solutions into an operational environment to ensure a sustainable solution.
• Excellent communication and interpersonal skills.
• Proficient with Microsoft 365 and AutoCAD

Job Responsibilites:

• Requisition fulfilment for raw materials, workshop tools and office supplies
• Generate purchase orders, oversea delivery schedules and maintain purchase records
• Manage suppliers, resolve discrepancies or quality issues on purchases
• Inventory management with workshop/storeman

Job Requirement:

• NTC/ Diploma preferably in Mechanical/Precision engineering
• Min. 2 years of experience preferably in Oil & Gas/engineering
• Excellent communication, negotiation and interpersonal skills
• Proficient in Microsoft Excel, SAP knowledge will be an added advantage

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Purchasing Manager Job Description

We are seeking an experienced purchasing manager to handle our company's purchasing activities. The purchasing manager's responsibilities include developing purchasing strategies, maintaining positive relationships with suppliers, coordinating with internal teams regarding their supply needs, and overseeing the purchasing team in their daily activities. An outstanding purchasing manager should have excellent leadership abilities and be able to negotiate the best possible deals with suppliers.

Purchasing Manager Job Responsibilities

· Demonstrates effective communication and problem-solving skills.

· Lead and direct the work of purchasing clerks including hiring, training and supervising.

· Contract management to include all aspects (e.g. administer, review, manage, file, evaluate, analyze, and negotiate).

· Negotiate or renegotiate and administer contracts with vendors.

· Administer bidding process and contracts (e.g. prepare specifications, evaluate bids, recommend vendors, etc.).

· Research and evaluate vendors/contracts to ensure it is in compliance with government regulations (e.g. vendor debarment and suspension regulation).

· Evaluate vendors to ensure its performance is aligned with established specifications.

· Evaluate order and bid documentation.

· Develop and implement purchasing and contract management instructions, policies, and procedures.

· Review and maintain good record of purchasing files and records (purchase orders, contracts, etc.) to ensure its compliance with company policies and procedures and ensure the availability of documentation.

· Back up purchasing clerk to include ordering of supplies/goods, equipment and material, reviewing, and processing/issuing of purchase order.

· Review and monitor capital purchases to ensure its compliance with company policies and procedures.

· Identify opportunities for cost savings

. · Compile data from variety of sources for analyzing and ensuring compliance with company policies and procedures and monitoring of purchasing processes.

· Continually improve purchasing methods/processes.

· Response to inquiries from internal and external sources in providing information, direction, and or appropriate referrals.

Purchasing Manager Requirements

• Previous working experience in Purchasing Management
• Degree in Business Administration, Logistics, or similar relevant field
• Deep knowledge of inventory and supply chain management.
• Hands-on experience in budgeting and purchasing management
• Superb communication, interpersonal and leadership skills
• Outstanding negotiation skills
• Problem solver with a strong analytical mindset
• Outstanding organizational and time management skills
• Excellent customer service skills
• Proficiency in Microsoft Office and purchasing software.
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Salary : $2500 - $5500

Working hours: Mon to Friday 9.00am to 6pm,

Saturday 9.00am to 2pm,

total 5.5 days work

Location: Jurong East

We are a construction metal / aluminum/ stainless steel / glass fabrication and installation works company .

Now looking at least 5 years’ experience of Senior Project Engineer who experienced in Metal Works /structural steel / stainless steel and aluminum architectural works for Condos & HDB building project.

Scope of works :

1) Require skills : Report directly to CEO for Managing the site, planning and monitoring the project purpose

2) Lead a project team of consultants, main con in daily site activities to ensure deadlines will be met.

3) Conduct project briefing and kick start meeting.

4) Knowledge of legal issues and Workplace Safety & Health standards is essential.

5) Liaise with clients for site inspections, submission of necessary reports, and maintain all required records at the sites. Prepare reports on the completion of works.

6) Keep track of submission status like shop drawings, materials, samples, method statements, and all other submissions.

7) Supervise the work of labours, machines, ets and give them guidance when needed.

8) All other duties as and when assigned.

Requirement :

1) Candidates with leadership qualities and experience would be considered for Assistant Project Manager role.

2) Team player and can work independently.

3) Must be able to effectively handle stressful situations.

4) Construction related experience advantageous, At least 5 years of working experience in the related field is required for this position.

Interested please drop your resume to [email protected]

About Company:

At Botsync, we aim to build a more accessible and simplified automation solution and to be the partner of choice for intralogistics automation. With our syncOS software integrator tool and MAG AMR platform, we provide an intelligent end-to-end integrated automation solution for factories and warehouses. Our solutions enable companies to implement automation solutions that are fully transparent, more data-driven, and fundamentally flexible to alter and reconfigure.

Role Summary:

We are seeking a highly motivated and skilled Commissioning Engineer to join our growing team. You will play a crucial role in bringing our Autonomous Mobile Robots (AMRs) to life, ensuring they are seamlessly integrated and operational within our customer's facilities.

Responsibility:

• Work closely with the engineering team to understand AMR specifications, functionalities, and ROS-based navigation systems
• Travel to customer sites for AMR installation, configuration & testing
• Work with project management & integration teams to ensure successful project execution
• Conduct thorough system & safety checks to ensure compliance with regulations & optimal performance
• Troubleshoot & resolve technical issues related to AMRs, ROS Navigation & associated software
• Conduct preventive maintenance at customer sites, and resolve any identified issues
• Provide comprehensive training to customer personnel on AMR operation & maintenance procedure
• Document commissioning process & maintain detailed records for future reference
• Identify and propose potential improvements to AMR performance & user experience
• Collaborate effectively with cross-functional teams including engineers, developers & customer support personnel to ensure successful project execution
• Build relations with customer’s operations & maintenance teams during installation
• Educational Requirements: Bachelor’s degree in Electrical Engineering or a similar background

Key skills candidate(s) must possess:

• Proficient in using ROS (Robot Operating System)
• Proficient programming skills in Python & C++
• Basic understanding of electro-mechanical systems such as actuators, motors, sensors and other similar components
• Proficient hands-on skill sin mechanical assembly, soldering, crimping, etc
• Strong critical thinking & problem-solving skills with the initiative to self-learn new skillsets when required
• Strong communication and interpersonal skills
• Able to communicate in English effectively both verbally and in writing
• Able to work and thrive in a high paced work environment
• Comfortable with travelling to sites regionally and working in logistics & production environments

Benefits that Botsync provides:

• Travel to different locations and meet new people
• Work with a highly energetic and young team
• Direct interactions with end customers to learn about their processes
• Growth in technical skillsets across software and hardware domains, by working with different engineering teams
• Improvements to problem solving & critical thinking ability

1. Plan, execute and reporting of Maintenance Planning, SDM planning, Training plan, training recommendation, Weekly and Monthly report, Staff performance appraisal

2. Responsible for PM development and implementation (iMan), Daily PM activities and daily patrol, Process & Equipment improvement, Equipment daily issue and Drawing updates

3. Responsible for Vendor evaluation, ECR report and action items, Equipment disposal, Development of Safety procedure

4. Responsible to ensure that equipment are properly designed and installe and performing effectively and efficiently.

5. Establish and monitor programs for critical equipment analysis and condition monitoring techniques.

6. Reviews deficiencies noted during CM and provides technical guidance for CMMS (iMan).

7. Maintains and advice on the use and disposition of spares.

8. Promotes equipment standardization.

9. Consults with maintenance crafts workers on technical issues and monitors new tool and technology.

10. Develops standards for major maintenance and make cost effective benefits review of maintenance programs.

11. Provides technical guidance for PM and Predictive maintenance.

12. Serves as the focal point for monitoring performance indicators for maintenance management

13. Optimizes maintenance strategies

14. Responsible for analyzing equipment, operating data

General Responsibilities:

· The Process Commissioning Lead is responsible for the safety of personnel working under his supervision and to ensure that work is planned and executed in accordance with Client’s policies for Health and Safety, Quality and Environmental protection. He or she has following general responsibilities:

· Commissioning activity safety management.

· Participate in definition of project system/sub-system structure.

· Coordinate with vendor/Engineering and construction Team to execute the topside system commissioning

· Perform and overall responsibility for all topside Process system commissioning

· Participate in defining scope of work for refurbishment, conversion and topsides.

· Prepare system sub system and boundary markup drawing for Topside system

· Prepare system documentation and procedures for commissioning scope in line with system responsibility matrix.

· Coordinate with Operation and smooth handover to topside commissioned system

· Closure and handover of Pre-commissioning and commissioning completion’s execution scope

· in line with system responsibility matrix.

· Closure and acceptance of system punch list post hand-over in line with system responsibility matrix.

· Package Factory Acceptance Tests (FAT) - documents review and verification of ‘punch’ items

· against received equipment.

· Verify and record module main scope contractors Pre-Commissioning activities (like Pipe Alignment, Flange management, Flushing, Air Blowing, and N2 Blanketing)

· Coordinate with vendor to complete all related Mechanical and Process system commissioning

· Coordinate with Topside commissioning/ Technician to complete the commissioning Task

· Ensure that commissioning is performed in accordance with all specified requirements and with results satisfactory to Client.

The responsibilities of the Topside Process Commissioning Lead includes the following specific duties:

· Prepare and allocate “B” ITR check sheets for the project, and to equipment types and tags.

· Prepare and Review System and Sub-System responsibilities for the Topside team.

o Vast knowledge in Pre- Commissioning and commissioning of FPSO process System like Gas Compressor, produced water Treatment system, HP/LP separation, SW treatment and etc.,

· Previously Working as lead process commissioning Engineer in minimum two FPSO projects

· Prepare and write the System Commissioning Procedures for the Topside system scope, as per the responsibility matrix.

· Monitor, Pre-Commissioning and Punch lists status on Completions database and prepare systems ready for commissioning.

· Walk downs, punch list and acceptance of Mechanical completion of systems as per responsibility matrix.

· Manage and Co-ordinate Lead and discipline techs to ensure most efficient coverage of resources in line with commissioning plan.

· Conduct review meetings with construction to coordinate Inspection Test Records (ITRs) flow path is in accordance with system planning of relevant systems.

· Liaise with database co-ordinator on certification release and acceptance.

· Review and accept system / sub-system SMCC (System Mechanical Completion Certificate) with associated agreed punch list items.

· Liaise with vendors and plan site arrival to ensure maximum output from availability. Prepare arrival documentation and work site requirements on a case by case basis.

· Responsible for change management of system after initial implementation. To include any associated system configuration / correction / modification works are properly incorporated as per change control management.

· Responsible for review, implementation and closure of TQ’s raised on a discipline or systemlevel.

· Identify and prepare required test equipment, spare parts and temporaries with Contractor, Vendor or Shipyard for pre-commissioning and commissioning of system.

· Ownership and review Commissioning Packages as assigned in the system responsibility matrix.

· Prepare report for Commissioning Manager on a weekly basis of all Topside commissioning system activities related to commissioning on a system-by-system basis as per responsibility matrix

· Prepare Topside system related document and execute the B ITR accordingly

· Travel to offshore project sites and perform offshore commissioning / assist facility startup, and site survey as require

The person will be responsible for the maintenance of security / IT systems of customer sites.

You will require ensuring the operational and functional of the system under our scope. Working closely with STEE customer, contractors, vendors and establish well working relationship.

Key Responsibilities:

• Provide Corrective Maintenance works/activities through the following (but not limited to):
• Responsible for the deployed system functionalities and ensure in working condition at all times.
• Provide onsite support on security system related work for the Server, Network, Security related Equipment and Workstation.
• Perform Routine and Corrective Maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements.
• Perform standby duty after office hours as and when required.
• Attend to ad hoc call during and after office hours.
• Working as a team to support operations, ensure optimum uptime and achieve business KPI.
• Collate reports and checklist of PM works for billing purpose and CM works report for filing.
• Prepare/updates service checklist.
• Monitor of spare parts availability to support and meet downtime of system. Monitor of EOL/EOS of equipment installed.
• Co-ordinate with sub-contractors and customer on site matters, work schedule and quality of work.
• Support Contract administration works (Ordering, billing milestone, O&M submission, Operation Manual submission, maintenance checklist and asset list).
• Assist A&A work/ VO work for sites during maintenance cycle.
• Perform other job responsibilities as and when assigned.

Requirements:

• Knowledge in Security/ Server System/ Network equipment would be advantages.
• Able to be on standby or on shift/rotation to attend on-site 24 hours emergency service.
• Possess good analytical skills and ability to communicate with customers at all level.
• The ability to work quickly and under pressure. Good problem-solving skills needed.

RESPONSIBILITIES:

• Proficiency in switching and routing (particularly Cisco/HP Aruba).
• Proficiency in wireless networking (particularly Aruba/Cisco/HP Aruba)
• Proficiency in VPN technology (IPsec/SSL-VPN/Secured remote user access).
• Experience in Firewall deployment/configuration/maintenance.
• Ability to understand customers’ networking and security requirements.
• Participate in network design and ensure that solutions proposed meet customers’ need.
• Supporting and provide quality presales technical consultation and develop cost effective, resilient, innovative and reliable Network solutions.
• Keeps abreast of technological advancement in the industry in the area of Infrastructure security.
• Good understanding and exposure to Network Security.
• Understand latest network/security threats & issues & their mitigating solutions.
• Ability to self-manage projects and provide timely update on progress.
• Bonus to have experience in other solutions, Load Balancers/Proxy/WAN Optimizer/NAC/Network Monitoring/etc.
• Bonus to have experience in provisioning Cloud platform (MS Azure/AWS) on networking and security setup, provisioning for Hybrid environment and user remote access.
• Bonus to have experience in Voice networking/Video Conferencing.

QUALIFICATION & EXPERIENCE

• Diploma/Degree in Computer Science or IT, or with at least 2-3 years of relevant. working experience in IT Network industry and involved in Pre-sales or Post-sales of medium to large/complex Infrastructure.
• CCNA or CCNP certification is preferred.
• Checkpoint, Fortigate, SOPHOS, Aruba certification would be preferred.
• Familiar and conversant in Routing, Switching, Wireless, MPLS, DHCP, DNS, NAC, Proxy, Syslog, Firewall, SSL VPN, Network Management and Structured Cabling.
• Ability to perform independently and interface with customers, partners and account team.
• Good knowledge of consulting frameworks and methodologies.
• Good fundamentals in the understanding of the inter-dependencies of the services (application, system & network).
• Knowledge of IPV6 and the related security implications.

SKILLS AND ATTRIBUTES:

• Good interpersonal and communication skills, high adaptability and positive attitude are expected.
• A team player with determination to drive to excel.
• Excellent customer service skills.
• Self-motivated with a strong drive to succeed.

Responsibilities & Duties:

• Sourcing, quotation and price comparison
• Generate purchase order, track delivery and update orders in a timely manner
• Ensure purchase order, invoice and delivery order are attached with supporting document
• Verify supplier invoice quantity, unit rate and system data entry integrity
• Mange company assets
• Filing, administrative and any other ad hoc duties assigned by superior

Prerequisites:

• Minimum GCE ‘O’ level qualification
• Proficient in MS Excel, MS Word
• Proficient in ACCPAC sage system is an added advantage
• A good team player with initiative and sense of responsibility

• Diploma or Bachelor’s Degree in Electronic, Electrical or Engineering equivalent.
• At least 3 years’ experience as an automation or control engineer.
• Knowledge in PLC control system, SCADA and schematic control drawing. e.g. Omron PLC, LabView SCADA, Citect SCADA or AutoCAD Electrical.
• Familiar with automation system, mechanical & electrical, actuator & control accessories.
• Prepare all engineering requirement, budget, conceptualization, commissioning and provide training.
• Positive attitude, able to work independently with minimum supervision.
• Job assignment may be deployed oversea.

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Job Responsibilites:

• Requisition fulfilment for raw materials, workshop tools and office supplies
• Generate purchase orders, oversea delivery schedules and maintain purchase records
• Manage suppliers, resolve discrepancies or quality issues on purchases
• Inventory management with workshop/storeman

Job Requirement:

• NTC/ Diploma preferably in Mechanical/Precision engineering
• Min. 2 years of experience preferably in Oil & Gas/engineering
• Excellent communication, negotiation and interpersonal skills
• Proficient in Microsoft Excel, SAP knowledge will be an added advantage

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities

• Establishing electrical design criteria, performing design calculations, setting parameters and developing drawings
• Collaborate in a cross-functional environment
• Liaising with vendors, clients and other engineers to ensure projects are completed to specifications.
• Analyzing existing processes and improving processes and practices

Requirements

• Bachelor’s degree/diploma in electrical engineering
• Extensive practical experience in electrical, electronic and instrumentation systems
• Knowledge in PLC programming
• Excellent problem-solving and analytical abilities
• Practical experience with an Electrical design software
• Electrical design and implementation of heavy equipment or plant is preferable
• Strong interpersonal, negotiation, and communication skills
• Strong command of English

Responsibilities:

• Undertake the assignments on one's own such as commissioning, installation, maintenance, trouble-shooting and repair/overhaul for MTU engines and associated product
• Capable of resolving technical matters and completing services according to the works order for acceptance by the customers.
• Conduct acceptance test of equipment and systems with customers or customer representatives.
• Carry out repair/adjustment if required.
• Provide service/investigation reports where applicable.
• Prepare and submit travel report on work progress as well as completion of project.

Requirements:

• Minimum Diploma/Degree in Mechanical/ Automation Engineering.
• At least 2 – 3 years of experience in the diesel engine/generator industry.
• Experience in troubleshooting, project handling/execution, servicing and commissioning.
• Communicates effectively, has a strong initiative and ability to work under pressure.
• Possess logical and analytical skills
• Highly independent, and an excellent team player.
• Must be able to work in Jurong (Tukang)

Job Description

• Responsible for the installation, configuration, administration, monitoring and daily maintenance of enterprise-wide application such as IIS, MS-SQL, Apache HTTPd, Apache Tomcat, JBoss , Websphere Application Servers, Kubernetes, Kafka, IBM-MQ.
• Interact with Software Development and infrastructure teams to define hardware requirements required to implement application solutions and troubleshoot technical issues
• Interact with software, network and infrastructure administrators to seamlessly implement solutions and solve technical issues
• Troubleshooting web, middleware and database environments
• Identify potential and real performance bottlenecks within web environments
• Using troubleshooting methods to differentiate between an infrastructure or environment problem
• Administration of Web environments
• Constantly update documentation as necessary to reflect system setup and environment.
• To handle escalation seamlessly to avoid any gaps that may arise to meet or exceed SLA.
• To utilise ITSM process and tool support.

Requirements

• Must be a Singaporean citizen due to G50 security clearance requirements by the client.
• Diploma/Degree in Information Technology/Computer Science/ Computer Engineering or equivalent.
• Working experience in Linux and Windows system.
• Knowledge or work in environment using Azure a plus
• Strong implementation and administrative skillsets for Linux and Windows
• Good knowledge of IIS, MS-SQL and open source solutions like Docker containers and Kubernetes container orchestration
• Prior experience providing enterprise-wide on-premises systems support
• Possess analytical mindset
• Possessed initiative that would improve productivity and efficiency.

Responsibilities:

• Manage and monitor all installed systems and infrastructure to ensure the highest levels of systems and infrastructure availability
• Continuously analyse platform behaviour and give recommendation for improvements (system/infrastructure)
• Maintain security, backup, and redundancy strategies
• Write and maintain custom scripts to lower the human intervention time on any tasks
• Help the network teams with specifications for the monitoring and automation requirements
• Participate in standby roster as needed, providing 2nd / 3rd level support, and ensuring timely resolution of incident tickets
• Write and maintain up-to-date technical documentation
• May involve project-based work for the improvement of the network

Requirements:

• Familiarization with company's network architecture and all relevant products/processes in interaction with different platforms
• Good experience in networking concepts and equipment such as IPv4/IPv6, MPLS/BGP/OSPF, netflow, routers, switches, load balancers, probes
• Good understanding of LAN and WAN technologies based on Huawei, Nokia, Cisco, etc.
• Strong knowledge of Linux system administration, networking, and troubleshooting
• Strong competency in shell and python scripting languages
• Knowledge in KVM, Docker/Kubernetes, and ELK stack
• Familiarity with monitoring tools such as Solarwinds, Nagios, Cacti, Zabbix, etc.
• Familiarity with high availability system architecture (load balancing, redundancy, caching)
• Good analytical and problem-solving abilities (logs analysis, database queries, etc)
• Experience in database manipulation and administration (backup, replication, troubleshooting)
• Self-learner in new system matters
• Ability to work as part of operational team and to support multiple tasks at the same time
• Flexibility and adaptability to changing environment and business demands
• Ability to interface and communicate with all levels of management, presenting ideas in user-friendly language
• Strong written and oral communication skills