• Drawings Review (P&ID & Isometric): Analyse piping schematics to verify that installation conforms to design standards, process flow, and piping isometrics for accurate fabrication. Cross-check that the system follows design specifications, noting discrepancies for correction.
• Material Inspection & Verification: Ensure all piping materials, fittings, and consumables meet ASME standards and project specifications through mill certificates and visual checks. Ensure material traceability by confirming that materials match project specifications and certifications (e.g., ASTM standards, material grades, heat numbers).
• WPS/PQR Compliance: Review and verify that Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) are qualified and comply with ASME Section IX, ensuring correct application on site. In PQR to ensure to verify for mechanical testing (Tensile, Impact, Bend, etc)
• Welding Process Monitoring: Oversee the welding process to ensure it complies with the qualified WPS, monitoring essential variables such as pre-heat, inter pass temperature, and welding technique.
• Check for any deviations from the approved welding procedures, ensuring proper filler materials, joint configurations, and weld sequences are used.
• Welder Qualification: Verify the qualification of welders by confirming that they meet the requirements outlined in ASME Section IX for the specific processes and materials they are working on. Witness welder qualification tests and maintain records of each welder's performance for the specific weld types and materials.
• Welding Joint Inspection: Inspect welded joints for conformity with welding symbols, dimensions, and tolerances as per engineering drawings and ASME Section IX requirements, ensuring correct joint preparation and quality.
• NDT Supervision: Supervise non-destructive testing (NDT) methods such as radiographic testing (RT), ultrasonic testing (UT), magnetic particle testing (MT), and dye penetrant testing (PT) to assess the integrity of welds according to ASME acceptance criteria table.
• Piping Fabrication & Installation Inspection: Inspect piping fabrication for correct fit-up, alignment, and installation as per project drawings and standards, checking pipe supports, alignment, and joint integrity.
• Pressure Testing: Witness and approve hydrostatic or pneumatic pressure tests on piping systems, ensuring that the pressure holds for the designated duration as per the ASME code and client requirements. (Hydrostatic Test, Pneumatic Test, etc). Review and sign off on pressure test reports, ensuring that all safety and procedural guidelines were followed during the testing.
• Documentation Control: Ensure proper documentation control, including test reports, inspection records, and welding logs, for creating and maintaining the piping test package, ensuring traceability and compliance.
• Communicate regularly and closely with clients or contractors to provide updates on quality control, inspections, and test results. Ensure all piping-related documentation, such as material certificates, welder qualifications, NDT reports, and test packages, are properly maintained and meet the required standards for final handover.

Job Responsibilities:

• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Coordinate and monitor work progress at site (periodical site inspection and attending meetings)
• Lead in Site Coordination and execution relating to the construction project.
• Ensure that the construction, installation and assembly of components, equipment and systems of the construction is aligned with the construction plans and drawing designs.
• Assist Construction Manager and Project Manager in sub-contractor management, on-site technical, engineering matters.
• To lead a team of supervisors and engineers, to ensure, supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & project specifications.
• Facilitate regular inspections to ensure compliance with relevant regulatory and legislative requirements, processes and procedures.

Job Requirements

• Possess a Degree in Civil Engineering or equivalent.
• Minimum 2 years of relevant building project experience in Main-contractor environment
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and consortium partners.
• Must be technically inclined and possesses excellent problem-solving skills.
• Meticulous in drawing preparation and documentation
• Experienced with Building / Industrial projects will be a plus.
• Experienced with Public project.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

The Sr. Systems Engineer in the Developer Experience group will be responsible for engineering and supporting various technologies and tools to provide best Developer experience for Visa’s Development community.  Key responsibilities include:

• Engineer vendor products to Visa’s environment by installing, upgrading, patching, and maintaining Developer tools. 
• Interface with internal departments such as Cybersecurity and Governance groups to ensure controls are established maintained and complied for all Developer tools.
• Interact with vendors and provide necessary feedback to tailor vendor products to meet Visa’s needs.
• Develop standards and enforce governance across CICD practices
• Create and maintain templates and catalogs of pipelines and manage inner sourcing processes
• Perform regular housekeeping on tools to provide high standards of application stability and reliability.
• Support ongoing Developer Tools projects and provide technical input as needed.
• Support complex technical issues in an interop production environment.
• Participate in L3 on-call support rotation.

Tools Include:

• Project management
• Source code management.
• Build and Deployment management.
• Test and Quality tools.
• Cloud services for DevOps   
• Developer productivity and analytics tools.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

The Staff Systems Engineer in the Developer Experience group will be responsible for engineering and supporting various technologies and tools to provide best Developer experience for Visa’s Development community.  Key responsibilities include:

• Engineer vendor products to Visa’s environment by installing, upgrading, patching, and maintaining Developer tools. 
• Interface with internal departments such as Cybersecurity and Governance groups to ensure controls are established maintained and complied for all Developer tools.
• Interact with vendors and provide necessary feedback to tailor vendor products to meet Visa’s needs.
• Develop standards and enforce governance across CICD practices
• Create and maintain templates and catalogs of pipelines and manage inner sourcing processes
• Perform regular housekeeping on tools to provide high standards of application stability and reliability.
• Support ongoing Developer Tools projects and provide technical input as needed.
• Support complex technical issues in an interop production environment.
• Participate in L3 on-call support rotation.

Tools Include:

• Project management
• Source code management.
• Build and Deployment management.
• Test and Quality tools.
• Cloud services for DevOps   
• Developer productivity and analytics tools.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$4000

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

- Makes any necessary changes to existing models or drawings

- design drawings using CAD

- Provide technical support to various personnel as needed

- Work closely with engineers to ensure drawings and models meet design requirements and specifications

- Ability to operate computer-aided design (CAD) software and manual drafting workstation

- Ability to multitask and manage several projects at a time

Job Responsibilities

1. System Design and Development

• Design motion control systems, including hardware and software components.
• Develop and test control algorithms for precision motion systems.
• Create detailed design specifications and documentation.

2. Component Selection and Integration

• Select appropriate sensors, actuators, motors, and controllers for the motion control system.
• Integrate components to ensure seamless operation and optimal performance.
• Work with suppliers and vendors to source high-quality components.

3. Simulation and Testing

• Conduct simulations to predict system behavior and validate design choices.
• Develop and implement testing protocols to evaluate system performance.
• Troubleshoot and resolve issues identified during testing.

4. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers.
• Communicate design concepts and progress to stakeholders.
• Collaborate with manufacturing teams to ensure designs are feasible and cost-effective.

5. Optimization and Improvement

• Continuously improve motion control systems for better efficiency, accuracy, and reliability.
• Stay updated with the latest advancements in motion control technology.
• Implement feedback from field tests and customer use to refine system designs.

6. Project Management

• Manage project timelines, budgets, and resources.
• Ensure projects meet deadlines and quality standards.
• Coordinate with project managers and other engineers to align with project goals.

Required Skills and Qualifications

1. Technical Skills

• Proficiency in motion control technologies and principles.
• Experience with CAD software for designing mechanical and electrical components.
• Knowledge of programming languages (e.g., C/C++, MATLAB, Python) for developing control algorithms.
• Familiarity with PLCs (Programmable Logic Controllers) and HMI (Human-Machine Interface) systems.

2. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot complex motion control issues.

3. Education and Experience

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Robotics, or a related field.
• Relevant experience in designing and implementing motion control systems.

4. Soft Skills

• Excellent communication and teamwork skills.
• Strong organizational and project management abilities.
• Attention to detail and a commitment to producing high-quality work.

Additional Responsibilities

• Compliance and Safety

• Ensure all designs comply with industry standards and safety regulations.
• Conduct risk assessments and implement safety measures in system designs.

• Innovation and Research

• Engage in research and development to explore new motion control technologies.
• Innovate and propose new solutions to enhance system performance and capabilities.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Precision Engineering or equivalent
• Good communication skill
• Has a passion for Engineering
• Occasional overseas travelling is required
• Fresh graduates are welcome to apply

Location: based on Singapore and China (Worldwide Travel Required)
Department: After Sales Service
Reporting To: After Sales Service Manager

Role Overview:

The After Sales Engineer will provide global after-sales support for marine alternative fuel gas supply systems and cargo handling systems. This role involves traveling to customer vessels for troubleshooting, ordering spare parts, delivering engineering services, and liaising with the home office for advanced technical solutions. The engineer will work closely with clients to ensure system performance, resolve operational issues, and provide technical expertise, ensuring customer satisfaction and system reliability.

Key Responsibilities:

1. Troubleshooting & Field Service:
   • Travel on board vessels worldwide to troubleshoot issues with gas supply and cargo handling systems.
   • Diagnose and resolve system malfunctions, performing necessary repairs or adjustments.
   • Provide on-site technical support, testing, and commissioning services for customers.
2. Spare Parts Management:
   • Identify necessary spare parts and order them in a timely manner to minimize system downtime.
   • Work with the procurement team and suppliers to ensure the availability and timely delivery of spare parts.
   • Maintain accurate records of spare parts used and report to the service team for inventory management.
3. Customer Support & Liaison:
   • Act as the main point of contact for customers regarding after-sales issues.
   • Ensure that all customer complaints, service requests, and maintenance needs are addressed promptly and efficiently.
   • Provide clients with comprehensive technical guidance and training on the operation and maintenance of systems.
4. Coordination with Home Office:
   • Collaborate with the home office engineering and commissioning team to provide clients with more specialized solutions or advanced troubleshooting assistance.
   • Report back to the office with details of field issues to facilitate continuous improvement and product development.
   • Provide feedback to the R&D and engineering teams on recurring issues or areas for improvement in product design or performance.
5. Documentation & Reporting:
   • Prepare detailed service reports following field visits, documenting repairs, parts used, and any recommendations for future maintenance.
   • Ensure compliance with all relevant safety standards and quality protocols during service activities.
   • Maintain accurate and up-to-date service records in accordance with company procedures.
6. Continuous Improvement:
   • Monitor and assess the performance of C-LNG’s systems on client vessels and recommend system upgrades or modifications.
   • Participate in training and stay updated on new technologies, products, and regulatory changes in marine alternative fuel systems.
7. Safety & Compliance:
   • Ensure that all service activities comply with local and international maritime safety and environmental regulations.
   • Provide guidance to customers on maintaining compliance with marine industry standards, including emissions control and alternative fuel use.

Qualifications:

• Bachelor’s degree in engineering (Naval Architect, Marine Engineer, Machinery, or Electrical preferred).
• More 5 years of experience in testing & commissioning of ship’s machinery, electrical or other marine system; any experience on LNG gas supply, or cargo handling systems is a plus.
• Hands-on experience in field service, troubleshooting, and maintenance.
• Willingness to travel extensively and work in challenging environments.
• Strong communication skills for client interactions and reporting. Proficiency in both Chinese and English, with effective verbal and written communication skills.
• Knowledge of maritime safety and environmental regulations is a plus.

Job Responsibilities:

• Provide Level 2 support to all IT hardware and Network related matters
• Ad-hoc projects assignment and fulfillment
• Review and improve processes pertaining to Infrastructure related services
• Develop and build quality Service document and procedures
• Enhance and establish Knowledge Management with ITIL as framework
• Handle and coordinate IT system procurement
• Assist in Annual Maintenance of Data center
• System Deployment
• Assist in Data backup and restoration
• Coordinate with vendor on network/hardware/software related matters
• System / Network troubleshooting and rectification
• Assist in Annual system Audit
• Asset management

Job Requirement:

• 3- 7 years of relevant work experience
• Minimum Diploma in related fields
• Ability to communicate with people of various level
• Hands on and a team player
• Knowledge in MS office, Printers, MFP, MS Operating systems, Active Directory
• Networking knowledge a must
• Microsoft certification will be added advantage
• Strong Problem solving skills

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

About JobTech

JobTech is the world's leading artificial intelligence and big labour data analytics product company that empowers leaders to develop people for new work realities, driven by real labour market needs and individuals' personal aspirations. JobTech is growing rapidly with global big names customers from both private and public sectors.

About the Team
At JobTech, we are obsessed with improvements, inventing the future and empowering connections. Be surrounded by an enthusiastic team, excited to solve human capital business problems in talent development, using deep technology and labour market data. We embrace empowerment and love seeing what each individual member of the team brings to the table. We are hands-on dreamers, brought together with the common goal of helping people stay employable. If you've always known you were made for something greater, and would like to be a part of changing the HR tech-scape, we want you.

Job Description

JobTech is a product start-up looking to solve real world labour problems and deliver the best possible experience to our end users. We are looking for passionate and self-driven hands-on engineers.

• Work closely with the Technical lead to manage and scale cloud infrastructure effectively.
• Design, implement, and maintain CI/CD pipelines for development and production environments.
• Develop and maintain automation scripts for system security and monitoring.
• Provide guidance on DevSecOps best practices and ensure compliance with security controls.
• Work closely with the Product Development team to improve and extend system architectures.
• Coordinate with customers' IT teams to facilitate smooth on-premise deployments.

Requirements

• At least 3 years of experience as a DevOps engineer.
• Proficient in Java/J2EE, Spring Framework and Linux.
• Experience in Jenkins for CI/CD.
• Experience working with microservices architecture.
• Knowledge in OWASP or other security related standards
• Knowledge on VPC, Subnets, NAT gateways, SSH tunnelling or Jump Hosts
• Experience in AWS Cloud. (EC2, S3, RDS, Cloudfront, EKS, Elastic beanstalk ...etc)
• Experience in Database Management
• Experience in Monitoring tools
• Experience in Scripting (Bash, Python ...etc)
• Hands-on experience with Terraform, Kubernetes, Docker, Ansible is a plus.
• Experience in Azure Cloud, Oracle Cloud, or Ali Cloud is a plus.

Compliance with our strict information security policies is mandatory

• Policy Compliance: Adhere to JobTech's information security policies and procedures.
• Risk Management: Identify, assess, and mitigate security risks to protect sensitive information.
• Incident Response: Participate in the detection, analysis, and response to security incidents.
• Security Training: Attend regular training on information security best practices.
• Data Protection: Ensure the confidentiality, integrity, and availability of JobTech data.
• Regulatory Compliance: Ensure compliance with relevant legal, regulatory, and contractual requirements related to information security.
• Team Collaboration: Work closely with other functional departments to ensure cohesive security measures.
• Confidentiality: Maintain the confidentiality of sensitive information and enforce data protection measures.
• Continuous Improvement: Stay updated on the latest security trends and continuously improve the JobTech's security posture.

Note: We regret to inform that only shortlisted candidates will be notified.

Job Description & Responsibilities:

• Design, develop, and test New CNC controller software and hardware.
• Select New CNC Controller from different makers.
• Integrate CNC controllers with various machine tools and equipment.
• Develop and optimize motion control algorithms for precision machining.
• Collaborate with cross-functional teams to ensure seamless integration and functionality.
• Troubleshoot and resolve issues related to CNC controllers and machine performance.
• Ensure compliance with industry standards and safety regulations.

Job Requirements:

• Minimum Degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or relevant discipline
• At least 5 years of experience in CNC controller development, programming, and integration.
• Experience with motion control, servo systems, and feedback devices.
• Experience in usage of NC cycles and providing solution to users.
• Basic knowledge of electrical design & understanding of electrical circuits.
• Specialized training or certification in CNC controller development is a plus.
• Experience with multi-axis CNC machines and advanced motion control algorithms.
• Previous experience in developing user interfaces for CNC controllers.
• Proficiency in programming languages such as C/C++/C# and PLC programming.
• Strong understanding of CNC machine architecture and control systems.
• Familiarity with communication protocols (e.g., Ethernet IP, Modbus).
• Excellent analytical and problem-solving skills.
• Strong communication and collaboration abilities.
• Ability to work independently and in a team environment.
• Ability to work in a manufacturing environment and perform hands-on tasks as needed.

Job Responsibilities

i. Design and Development

• Design material handling systems and components for wafer probers, including wafer loading, unloading, transport, and alignment mechanisms.
• Develop detailed engineering drawings,specifications, and 3D models using CAD software.
• Conduct feasibility studies and simulations to validate design concepts and performance.

ii. Prototyping and Testing

• Build and test prototypes to evaluate the performance and reliability of designs.
• Conduct experiments and tests to ensure that material handling systems meet performance criteria and industry standards.
• Analyze test results and make necessary design adjustments to improve functionality and efficiency.

iii. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers, to integrate material handling systems with wafer probers.
• Communicate design concepts, progress, and issues to stakeholders and team members.
• Collaborate with manufacturing teams to ensure designs are feasible and optimized for production.

iv. Innovation and Improvement

• Stay updated with the latest advancements in material handling technology and semiconductor industry trends.
• Identify opportunities for innovation and continuous improvement in material handling solutions.
• Implement feedback from field tests and customer use to refine and enhance designs.

v. Project Management

• Manage design projects from concept to completion, ensuring timelines and quality standards are met.
• Prepare and maintain project documentation, including design reports, test plans, and technical manuals.
• Coordinate with project managers and other engineers to align with project goals and deadlines.

vi. Compliance and Safety

• Ensure all designs comply with industry standards, safety regulations, and company policies.
• Conduct risk assessments and implement safety measures in design and testing processes.
• Document and address any potential hazards associated with material handling systems.

Required Skills and Qualifications

i. Technical Skills

• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) for designing mechanical components.
• Strong understanding of material handling principles and technologies.
• Knowledge of mechanical systems, robotics, and automation in the semiconductor industry.

ii. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot and resolve complex design issues.
• Excellent problem-solving skills and attention to detail.

iii. Education and Experience

• Bachelor’s or Master’s degree in Mechanical Engineering, Mechatronics, or a related field.
• Relevant experience in designing material handling systems, preferably in the semiconductor industry.
• Experience with wafer probers or semiconductor testing equipment is advantageous.

iv. Soft Skills

• Excellent communication and teamwork skills.
• Ability to work independently and manage multiple projects simultaneously.
• Strong organizational skills and a commitment to producing high-quality work.

Additional Responsibilities

· Supplier and Vendor Management

• Work with suppliers and vendors to source high-quality components for material handling systems.
• Evaluate and select suppliers based on quality, cost, and reliability.
• Manage relationships with suppliers to ensure timely delivery of components and materials.

· Training and Support

• Provide technical support and training to manufacturing and maintenance teams on material handling systems.
• Develop and maintain training materials and technical documentation for end-users.
• Assist in the resolution of customer issues related to material handling systems.

· Sustainability and Efficiency

• Promote sustainable practices and environmental responsibility in design activities.
• Identify and implement measures to improve efficiency and reduce waste in material handling processes.
• Conduct regular reviews and audits to ensure compliance with sustainability goals.

Responsibilities:

• Assist Project Manager with resource planning and budget milestones.
• Perform site study for PV system recommendations.
• Manage site team for safety compliance.
• Monitor project progress for specification, schedule, and budget alignment.
• Plan and prepare Bill of Materials (BOM).
• Coordinate with procurement for timely material delivery.
• Create checklists for solar project inspections.
• Investigate and troubleshoot M&E issues with stakeholders.
• Assist LEW with site testing and inspections.
• Design electrical and mechanical drawings using AutoCAD.
• Requirements:.ubmit project documents for authorities.

Requirements:

• Diploma in Mechanica/Electrical Engineering, or equivalents.
• Knowledge of AutoCAD, Solidworks, or modeling software (e.g., SketchUp, PVsyst, Helioscope) is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Info:

• Salary: Basic up to $4500 + 3 months VB
• Working Hours: Monday - Friday (08:30 AM - 05:30 PM)
• Location: Clementi

Job Scope:

• Oversee daily operations in the workshop and manage customer service interactions
• Ensure operational readiness of the workshop, maintaining accountability and integrity in all activities
• Develop and implement policies and procedures to maximize workshop efficiency
• Train and motivate staff to meet performance standards, ensuring they are prepared for their responsibilities
• Address and resolve issues promptly, effectively identifying and managing risks as they arise
• Regularly assess and improve workflows and working conditions to optimize labor use and operational efficiency
• Ensure all work adheres to the company's safety and housekeeping standards
• Act as an escalation point for the team on operational issues
• Facilitate communication between sales, operations, and customers
• Prepare and submit technical reports to customers and manufacturers
• Compile performance, budget, and expenditure reports as required
• Plan and achieve financial targets and key performance indicators
• Perform ad hoc duties as assigned by supervisors

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

As Infrastructure Engineer you will be required to implement and support monitoring, automation and batch scheduling tools

What will you do?

1. Understand Operation business needs and translate into technical requirement

2. To implement monitoring, automation and batch scheduling tools

3. To support post implementation tasks including patching and upgrades.

4. To recommend best practices to meet project requirements

5. Assist in POC/POV, product evaluation and tech refresh activities

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Job Scope

• Manage and execute project in cost effective, on time delivery with quality standards to meets client expectations;
• Managing the projects in accordance to our Company’s ISO 9001, ISO 14001 & OHSAS 18001 Standards and contractual requirements;
• Pre and post-contract stages from vetting tender documents, organizing tender activities as well as settlement of accounts with owner, sub-contracts / suppliers;
• The development and implementation of project management plans through the provision of project scheduling, monitoring, reporting and forecasting, ensure that safety regulations are complied;
• Providing and preparing all scheduling, budgeting and specification for the project work;
• Check drawings and quantities and ensure that the calculations are accurate for the project implementation;
• Carry out project planning, cost control, project management and documentations;
• Provide the direction in construction planning, coordinate work with other departments, sub-contractors, clients and consultants to ensure overall construction progress as scheduled;
• Liaise and assist in submission of all necessary permit, license to all relevant authorities for the project work;
• Attend meetings, correspondences and liaise with clients, sub-contractors and suppliers;
• Resolve design and site problems encountered during the construction period;
• Plan and manage actual and post construction issues with the clients, consultants, sub-contractors and relevant authorities;
• Ensure proper documentation of the project, such as record correspondence, as-built drawings, etc..;
• Close supervision of work carried out by sub-contractors and suppliers to ensure adherence to project schedule;
• Ensure highest quality on the work carried by the sub-contractor, fabricators and suppliers;
• Liaise with consultants, clients, sub-contractors and suppliers on the implementation of the projects;
• Check on the progress claim submitted by the sub-contractors;
• Monitor, track, report project progress, supervise Engineers, Supervisor, Technicians and sub-contractors’ on site;
• Follow-up on the defective work and ensure timely rectification by contractors, fabricators and suppliers;

Job Requirement

• Recognized Degree by BCA in Civil Engineering.
• Experience in Civil Engineering Projects, especially in Marine Construction of Jetty, Wharf, Harbour, Dredging, etc.

Reponsibilities:

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline.
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry.
• Able to interpret drawings and technical documents
• Able to work independently and contribute to the team excellence
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• NDE level 2 inspector is an advantage

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide. We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:.

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide. We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct research and development in trust technologies – translating algorithms into tools and frameworks and implementing working prototypes that can demonstrate how research outputs can be innovated to build new capabilities.
• Work closely with Centre’s researchers to design and develop research prototypes into the proof-of-concept systems.
• Design and build working tools that can support the technology transfer of new capabilities to research partners and can be used to showcase the value of a given research outcome.
• Write and maintain technical documentation, presentations, and papers on research into trust technologies testing, helping to educate and raise the overall competency in emerging areas of trust technologies.
• Engage global partners and researchers to understand latest trends and advance Singapore’s mindshare in this domain.

Job Requirements:

• Master’s degree in computer science/ engineering or related fields required.
• Candidates with minimum of 5 years continuous working experience in a similar role will be considered when appropriate.
• Bachelor degree with minimum 8 years relevant experience may be considered
• Proficiency in programming languages Java, C/C++ is a must.
• Experience in other programming languages and/or frameworks such as Python, Spring will be an advantage.
• Proficiency with using common Linux distributions such as Ubuntu, CentOS is a must.
• Proficiency and experience in developing network and communication protocols and using socket programming in cloud-based systems is a must.
• Proficiency in installing, configuring and using SQL database is a must. Experience in other data processing technologies such as NoSQL, Hadoop will be an advantage.
• Proficiency and experience in working with different virtualization technologies to enhance cloud service system performance is a must.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Good communication skills and some interdisciplinary interest is desired, to be able to interact with researchers at the Centre.
• Ability to work independently and to develop solutions under strict timelines is a must.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Good knowledge of system platform development, socket programming, middleware technologies, API development, related application frameworks and service layer models.
• Familiarity with general API security concepts (such as key validation, authentication, authorisation)
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

The Electrical Engineer is responsible for the design of the electrical system and electrical system inspection. He/She manages a team of technical supervisors and manages the project timeline. He/She works indoors, outdoors and occasionally, in cramped spaces. He/She will have to stand for long hours, climb, bend and kneel on-site for inspection and project coordination. He/She is also expected to be detail oriented to ensure safety on job.