-Taking charge liaising with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality

-In Charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all related government agencies, aviation authorities and customers’ requirements and regulations

n Charge of reviewing and revising quality procedures and quality control instructions and performing of internal audits to evaluate quality system, products, and processes

Responsibilities:

• Inspect incoming raw/packaging materials and product labels to ensure they meet standard specifications.
• Conduct checks on the production line for compliance with Good Manufacturing Practices (GMP), including in-process items and finished products, ensuring adherence to Standard Operating Procedures (SOP) and product specifications.
• Generate weekly QC reports.
• Work closely with the production team to ensure quality products are produced.
• Ensure products adhere to and comply with food regulations.
• Report non-conformances to superiors or the person-in-charge for investigation and corrective action.
• Verify product labels before printing.
• Support in managing retention samples.
• Assist in pest control management.
• Maintain documentation and records.
• Identify opportunities for process improvement and quality enhancement.
• Perform any other related duties as assigned by superiors.

Requirements:

• Minimum 1 year of relevant working experience preferred.
• Capable of working as part of a team as well as independently with minimal supervision.
• Possesses good interpersonal skills, analytical skills, self-motivation, and meticulous attention to detail.

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

The Opportunity

Esco Lifesciences Group is Singapore’s most globalized life sciences company, with annual revenues close to SGD 200M and global operations in over 42 locations and 26 direct countries across North America, Europe, Asia, Oceania.

Esco Aster Pte Ltd is an affiliate of Esco Lifesciences Group and was first incorporated in 2017.

Esco Aster is a contract research development and manufacturing organization founded and deeply rooted by scientists enabling fellow scientists to translate their bench work into commercially available products at affordable prices.

Our scientific work is in emerging and frontier biology utilizing cells as a final product or deriving products from cells which often we use cells as the factory to derive our target product.

Our first commercial breakthrough success is Esco Aster is commercially first in class being first in the world to be certified for cultivated/cell-based meat to FSSC 22000 and by a competent food regulatory body.

We are first in the region to operate an end-to-end integrated full cell line creation/immortalization or engineered cell line, cell culture process development, analytical development for stem cells and exosomes with full cGMP Capabilities from Drug Substance and small-scale fill & finish for final Cell Therapy Product.

The work we do creates a remarkable and lasting impact on our world. We offer you an opportunity to be part of this exciting journey to own your career and firsthand exposure to new emerging modalities supporting translational sciences.

Join us as we redefine BioSolutions for One World and One Health for the current and future generations to come.

Esco Aster.

One World Biosolutions for One Health.

Who we’re looking for

Physical/Mental Requirements/Work Environment

· Ability to understand protocols, technical reports and technology transfer documents.

· Ability to understand standard operating procedures and other related documents.

· Able to commit to weekend work when needed, off in lieu will be given for work on public holidays.

· Repetitive motions due to certain laboratory techniques.

· Good Understanding of Aseptic Techniques.

· Work performed in a clean room environment wearing PPE.

· Ability to define problems, collect data, establish facts and draw conclusions.

· Ability to focus regardless of circumstances and stress induced pressure.

· Ability to take proactive approach.

· Meticulous and systematic.

· Commitment to continuous learning and staying updated with industry best practices.

· Have a strong focus on safety, quality and timeliness.

· Have strong critical thinking skills.

Job Responsibilities

Sample and QC Process Management:

· Ensure all QC sample management, testing, including process validation, cleaning, raw materials, stability samples, water samples, etc., are planned and executed on time.

· Prioritize and plan all testing activities to support processing schedules.

· Plan QC testing on a FIFO basis to eliminate backlog and meet internal QC KPIs.

· Plan work assignments for all QC analysts based on the production plan.

· Support future setup of central QC lab for all BioSolutions within Esco Aster.

Leadership and Team Management:

· Lead the implementation of the Laboratory Information Management System (LIMS).

· Lead Quality Control SOP implementation.

· Collaborate with the Analytical Development Team and manage QC Analytical, Microbiology Team to manage the revision and/or change control of QC documents as needed.

· Ensure new Analysts and Specialists are trained appropriately.

· Supervise, develop, engage, and motivate a young and driven team of QC Team Members.

· Manage the routine operations of the QC lab, ensuring business delivery at the right quality, cost, and speed.

· Able to build and lead across functional department consisting of different QC functions and supervisors / deputies / subject matter.

Operational Oversight:

· Oversee several sub-teams such as sample management, reference management, regulatory management, and QC instrument and equipment management.

· Lead the team to comply with internal requirements in all aspects through end-to-end quality control system oversight.

· Ensure all activities in the QC team are performed in compliance with cGMP, data integrity, and EHS requirements.

· Keep up to date with the latest trends in Quality Controls Tools.

Training and Development:

· Oversee the training, evaluation, and management of staff in the QC lab, including coaching, developing, and supporting them to reach their full potential.

Regulatory Compliance:

· Manage GMP audits from regulatory authorities and clients, respond to audit reports, and create CAPAs as applicable.

· Support analytical method transfer activities.

· Author and review OOS/OOT and Deviation investigations for approval, maintaining investigation records in accordance with company policies.

Cross-Departmental Collaboration:

· Participate in Quality Risk Assessment Programs.

· Provide input and expertise on QC testing and practices for all departments.

· Serve as the QC representative for all customer and agency audits and support the audit of all 3rd party contract facilities.

· Oversee the management of Sample and Controlled Substance inventories.

· Provide technical support and advice on QC matters to other areas within the site: Production, Procurement, Supply Chain, Warehouse, and Process Developments.

· Work with Analytical Sciences and Technology (ASAT) to internal or external tech transfer from developed protocols from Analytical Development to Quality control including overseeing method verification, qualification, and validation activities.

Compliance Management:

· Participate in self-inspection and support client audits.

· Manage compliance tasks to ensure the Quality Control department is current and compliant.

· Maintain purchase orders, cost centers, and budgets for the QC department.

· Manage implementation and adherence to all applicable SHE and cGMP regulations.

· Support and oversee 3rd party test labs and ensure test labs are qualified per our QMS.

· Perform calibration and maintenance of QC laboratory equipment working with our CMMS and as per Iso 17025 standards and relevant GLP standards.

· Support/ oversee QC laboratory equipment/system qualification.

The job function listed is not exhaustive and shall also include any responsibilities as assigned by the Supervisor and Management from time to time to support GMP activities.

Requirements

· Bachelor’s degree in life sciences with minimum of 5 years of experience in Quality Control within highly regulated cGMP pharmaceutical industry. Experience is Biologics and ATMPs (i.e. Cell and Gene) is an added advantage.

· Candidates with experience in ATMPs (Cell & Gene) manufacturing are highly preferred but not mandatory.

· Familiar and keeping up to date with current GMP and applicable GxP regulations and standards; experience with regulatory requirements such as Singapore/HSA, US/FDA, EU/EMEA, etc.

· Good understanding of GMP requirements in release testing (Potency, Identity, Content, Impurities, Microbiological safety assays).

· Experience in HPLC, Flow Cytometry, ELISA, dPCR/PCR, Assays and method qualification.

· Proficient in MS Office Suite (Microsoft Word, PowerPoint, Excel).

· Strong analytical skills and the ability to interpret data to drive decisions and improvements.

· Able to work independently, self- starter, self-motivated and task oriented.

· Good communication skills and leadership skills to effectively collaborate with cross-functional teams.

· A thorough understanding of the principles and management of cGMP compliance, and a strong quality mindset.

· Must be able to work in a team as well as independently.

· Proven leadership and team management skills.

· Excellent communication and organizational skills.

· Experience with LIMS and other laboratory management systems.

· Experience in Laboratory Equipment Qualification is an added advantage.

· Will be able to commit 5 working days per week in a fixed pattern.

Apply now by submitting a Cover Letter and CV to [email protected].

Job Information

· Salary Package: Basic (starting from 2k) + Performance Bonus

· Other Benefits: Medical & Dental coverage

· Working Days: Monday – Friday + Half-day Saturday

· Working Hours: 8.30am – 5.30pm (Weekdays), 8.30pm – 12.30pm (Saturday)

· Working Location: Ubi/Eunos

· Job Contract: Full-time Permanent role

Responsibilities

• Perform daily, weekly & monthly inspection reports.
• Analyse and trouble-shooting production quality issues.
• Material receiving inspection
• Disposition of non-conforming products (incoming & outgoing).
• Handle customers’ complaint (CAR) with effective corrective actions.
• Provide training to QC inspectors.
• Liaise with client inspector on inspection point(s).
• Conduct regular line audit and drive for quality improvement.
• Conduct internal ISO audit and manage external customer audit.
• Conduct PMI, Pressure & PT tests
• To keep and update all the Welding Procedure Specifications (WPS) and
  Procedure Qualification Records (PQR)
• To keep and update all non-conformance reports (NCR), follow-up sheet, calibration status report of measuring and test equipment.
• Carry out any other duties as and when assigned by the immediate supervisor or higher management.

Requirements

• 2 years relevant working experience in related industries
• ASNT Level II
• Attention to Detail
• Strong written and verbal communication skills
• Effective time management
• Independent & keen learner
• Flexible and adaptable
• Able to manage high levels of stress
• Proficient in Microsoft applications: Outlook, Excel, Word, Power Point, etc.

Mon to Fri 8.30am - 6pm

Position Summary

This position play a critical role in driving compliance and quality programs for Healthcare Transportation & Facilities and supporting the Healthcare Quality Management System to ensure processes and systems are compliant with regional and local regulations and customer requirements.

Job Scope

1. Quality Policies & Procedures: Determine, implement & promote policies and procedures for company’s Network and facilities (hubs & stations) to ensure compliance to standards such as GDP, GCP and others.

2. Quality Assessment & Standards: Write & review SOPs and Work Instructions for transportation & fulfilment solutions pertaining to the healthcare industry.

3. Compliance & Quality Program Management: Implement compliance and quality programs to support local Quality teams to ensure they are kept up-to-date and prepared.

4. CAPA Process Management: Lead in process creation and review of documentation on the implementation and responses to corrective and preventive actions (CAPAs) and monitor action progress until closure.

5. Healthcare Quality Management System: Develop, implement & support the system and processes, develop corresponding training programs, and acts as Super User for eQMS system.

6. Internal Audit Programs: Design & implement robust internal audit processes to ensure readiness of various functions & processes when meeting regulatory agencies & customer audits.

7. Certification Audits: Lead various certification audits with relevant regulatory agencies and certification providers across the region.

8. Operations & Customer Audit Programs: Lead & prepare for regular audit programs / random checks / regulatory activities to achieve successful audit outcomes and proper post audit follow up actions.

9. Healthcare Customer Liaison: Liaise with customers to understand quality requirements / issues / underlying concerns to advise on the way forward, provide advice based on interpretations as applicable to 3PL and resolve issues via conducting root cause analysis.

10. Healthcare Quality Feedback: Liaise, consolidate feedback from different functions to update and prepare final copy for Quality Questionnaires, Agreements and RFQ Proposals for customers.

11. Validation Programs: Lead the validation of transportation lanes and critical equipment like cold chain facilities, and packaging systems.

12. Depot Support: Provide secondary / backup support to healthcare specialists for market depots.

Requirements :

1. Hold local pharmacist license

2. Have at least five (5) years of relevant experience in warehouse, quality + QMS for pharmaceutical / healthcare industry

3. Have competencies in quality assurance / regulatory affairs, customer relationship management and root cause analysis

4. Have working experience ensuring compliance in accordance to Goods Manufacturing Practise cGMP,)/, Good Clinical Practises cGCP, Goods Distribution Practice (GDP) & ISO13485 for Medical Devices, IATA CEIV and other local certifications in a warehouse and transportation business.

5. Experience in conducting external and internal audits for regions

6. Must hold at least Bachelor’s degree in Pharmacy from a reputable local or Australia’s institute.

7. This position require to communicate with counter part in China

8. Occasionally travel is required to sites and region warehouses.

Competency

1. Accuracy & attention to detail which is crucial to proper compliance to regulatory and standards

2. Problem-solving skills to support customer issue resolution

3. Planning & organization skills to ensure proper audit programs are managed effectively

4. Communication skills to facilitate engagements with customer and regulatory agencies

5. Project management capabilities and familiarity with Process Mapping, Six Sigma, Lean Methodology, Agile or Design Thinking

6. Apply data-driven decision making with the use of data analytics and visualization tools like Power BI and competency in Microsoft Office applications like Excel, Word, and PowerPoint

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Quality:

• Attend to Clients' complaints on pest issues and understand the potential causes of pests' activities before deploying Operations Exec. / Manager to site.
• Arrange technicians to conduct follow up services based on the findings of the operations team and follow up with technicians to ensure that the pest's activities are totally resolved.
• Conduct on-site routine reviews to Client's premises to check on the quality of the technical team and ensure Company's SOP and Protocol are followed thru' by technicians.
• Prepare ad-hoc / monthly formal reports to clients with recommendations for remedial actions for enhanced protection of their premises.
• Attend meetings with technical team as well as NEA inspections on site.

Safety:

• Implement on work plan, Risk Assessment, Safe Work Procedures, hygiene standards to ensure compliance with Workplace Safety & Health Environment.
• Maintain mandatory records and other documentations for Bizsafe Level 3 Certification.
• Candidate must possess a Diploma / Degree in the relevant discipline.
• Strong knowledge on General pests & safety regulations will be an added advantage.
• Proficient in MS Office.
• Possess good communication skills in English and Mandarin (to liaise with Mandarin speaking associates).
• Class 3 driving licence preferred.
• Able to start work immediately or short notice.
• 5 days work week (Afternoon shift).
• 5.5 days work week (Morning shift).

To assist in the daily administration jobs in the company. Expericene in office stills is an advantage and essential.

Knowledge with microsoft words , excel , data entry etc.. is part of the scope of works. Able to work independently

The Quality Engineer applies engineering principles and techniques to meet the quality targets and organisational objectives in a manufacturing environment. He/She also assists in analysing manufacturing and quality issues make recommendations for out of control processes.

In addition, the Quality Engineer participates in quality improvement projects in accordance with organisational objectives.

The Quality Engineer is required to have strong communication skills, good teamwork and an analytical mind to perform his/her role well to achieve the desired organisational outcomes.

~ Assist in implementation of improvement projects.
~ Attend to internal or external audits related issues.
~ Collect data for analysis.
~ Enforce practices of good safety culture and good manufacturing practices.
~ Ensure adherence to processes and procedures.
~ Ensure all quality plans are properly documented and maintained.
~ Ensure no expired tools running in the production line.
~ Facilitate the implementation of quality system in the organisation.
~ Identify opportunity for continuous improvement projects.
~ Implement calibration cost reduction activities.
~ Interpret information provided by the network/dashboard for quality performance monitoring.
~ Maintain production yield targets.
~ Monitoring quality control and assurance processes.
~ Perform evaluation/experiments.
~ Supervise manufacturing work for workplace safety and health compliance.

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

As a Senior Industry 4.0 (I4.0) Analyst at Micron Technology, Inc., you will report to the Smart Manufacturing and Artificial Intelligence organization. The team defines, drives and delivers end to end smart manufacturing solution, integrated across functions of the business. The team will investigate applying industry-leading the best methodologies in automation, AI and machine learning to enhance Micron’s product development, business, and administrative processes across the company.

Responsibilities and Tasks

• Lead the analysist for complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences.
• Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge.
• Creates specifications for reports and analysis based on business needs and required or available data elements.
• May provide consultation to users and lead cross-functional teams to address business issues.
• May directly produce datasets and reports for analysis using system reporting tools
• Understands business problem and translates user requirements into technical language and vice versa for data science / technical solution / IT teams.
• I4.0 Analyst with strong domain knowledge is preferred and will bridge the gap between users and developer team
• Accountable to ensure modules / functionalities address current metrics gaps and new business opportunity
• Translating project expected project metrics gain into dollar values, partnering with Finance
• Defining priority for projects for strategic pillar roadmap provided by Strategy Pillar Leader
• Conduct diagnostic and understand gaps and areas of improvement in current IIoT solutions and ways of working
• Work with PDE, Data Scientist, System Architect and IIoT end users to design & define requirements and analyze information, production interdiction that related to the adoption of IIoT for Smart Manufacturing
• Ensure optimization and standardization of tools and processes leveraging central team business partners to allow I4.0 solutions to be scaled sustainably across Micron Backend sites
• Develop business case, including impact validation approach, ROI of potential solutions and prioritize & propose projects for implementation
• Lead projects and activities that will require the coordination, support, and management of resources from global teams
• Provide expert functional and process guidance on system interfaces and capabilities

Qualifications

• Master/Bachelor's Degree in Electrical Engineering, Specialized in Data Analytic.
• At least 5-7 years of work experience in Assembly & Test and Post Wafer Fab (PwF) Process & Equipment Engineering or similar operations functions, good knowledge in High Bandwidth Memory (HBM) production is preferred
  
• Familiar with Composite Metro solution development, systems and solutions for high volume and high mix production environment
• Good interpersonal skills with demonstrable ability to effectively lead and present to small and large groups
• Proven ability to work multi-functionally with peers, senior and mid-level management
• Peer leadership and relationship management skills
• Strong analytical and problem-solving skills
• Highly organized and ability to remain flexible to the changing business needs

About Micron
As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and High Bandwidth Memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Analyzes complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences. Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge. Creates specifications for reports and analysis based on business needs and required or available data elements. May provide consultation to users and lead cross-functional teams to address business issues. May directly produce datasets and reports for analysis using system reporting tools.

GIC is one of the world’s largest sovereign wealth funds. With over 2,000 employees across 11 locations around the world, we invest in more than 40 countries globally across asset classes and businesses. Working at GIC gives you exposure to an extraordinary network of the world’s industry leaders. As a leading global long-term investor, we Work at the Point of Impact for Singapore’s financial future, and the communities we invest in worldwide.

Chief Operating Officer (COO) Office
The COO Office supports our COO to streamline operations and align them with strategic goals. You will work with the COO, Heads of Departments, and stakeholders across GIC to achieve operational excellence.

Cyber Security, Information & Technology Risk Management
You will be a part of an independent risk management function to protect the firm’s information technology assets, including business data, from external threats and operational risks, and to facilitate the firm’s digitalisation journey in a secure manner.

What impact can you make in this role?
You will be empowered to be at the top of your game by providing strategic partnership, and innovative technology solutions that supports GIC’s vision of being a tech-driven, global, long-term investment firm.

What will you do as a AVP, Risk & Control Officer - Infrastructure Risk Oversight?

• Drive compliance with operational risk processes and manage technology, information, and cybersecurity risks within various business areas, in line with the firm's risk appetite and regulatory requirements
• Plan and conduct technology, information, and cybersecurity gap assessment to identify possible risks at each stage of the Secure Software Development Lifecycle (SSDLC), evaluating relevant mitigating controls and measuring residual risk
• Collaborate with Business Partner & Solutions (BPS), Infrastructure and Platform Services (IPS) and Service Integration and Management (SIAM) teams to drive compliance with technology, information and cybersecurity policies and standards
• Monitor and report on the effectiveness of technology, information, and cybersecurity risk controls, identifying any control weaknesses and recommending improvements
• Facilitate risk and control awareness training on technology, information, and cybersecurity across the firm to ensure understanding and compliance, driving initiatives to promote a risk-based approach to application development within respective business areas
• Prepare regular risk and control reports for senior management, highlighting key audit, risks, and control issues
• Coordinate ITRM and third-line/Internal Audit risk functions to ensure a unified approach to audit & risk management

What qualifications or skills should you possess in this role?

• Relevant professional certifications such as Certified Information Systems Security Professional (CISSP), Certified in Risk and Information Systems Control (CRISC), or Certified Information Security Manager (CISM) are highly desirable
• Familiarity with Secure Software Development Lifecycle (SSDLC) processes and practices
• Knowledge of relevant regulatory requirements and industry standards for technology and cybersecurity
• Experience in conducting risk assessments and thematic reviews
• Strong understanding of technology, information, and cybersecurity risks and controls
• Excellent collaboration skills to work effectively with various teams across the organization
• Strong reporting skills, with the ability to monitor and report on the effectiveness of risk controls
• Ability to prepare clear and concise risk and control reports for senior management

Work at the Point of Impact
We need to be forward-looking to attract the right people to help us become the Leading Global Long-term Investor. Join our ambitious, agile, and diverse teams - be empowered to push boundaries and pursue innovative ideas, share your views, and be heard. Be anchored on our PRIME Values: Prudence, Respect, Integrity, Merit and Excellence, which guides us in how we make our day-to-day decisions. We strive to inspire. To make an impact.

Flexibility at GIC
At GIC, our offices are vibrant hubs for ideation, professional growth, and interpersonal connection. At the same time, we believe that flexibility allows us to do our best work and be our best selves. Thus, our teams come into the office four days per week to harness the benefits of in-person collaboration, but have the flexibility to choose which days they work from home and adjust this arrangement as situational needs arise.

GIC is an equal opportunity employer
As an employer, we passionately believe every individual brings with them unique diversity of thought and perspectives to meaningfully enrich perspectives of GIC teams to drive competitive performance. An inclusive environment yields exceptional contribution.

Learn More about out COO Office here:
https://gic.careers/departments/chief-operating-officer-office/

To be considered for the role, please submit a formal application through the GIC Careers site at

https://careers.gic.com.sg/job-invite/16012/

The Risk Control and Compliance Officer plays a key role in ensuring that all trading activities within the oil trading business adhere to regulatory requirements, industry practices, and internal policies. The officer will have a strong focus on Know Your Customer (KYC) compliance to mitigate the risks associated with trading in the commodity market.

Key Responsibilities:

• Assist in performing KYC checks for onboarding new clients, suppliers, and counterparties involved in oil trading activities. Ensure adherence to legal and regulatory requirements.
• Conduct vessel vetting to verify that vessels meet company standards for safety, compliance, and operational suitability.
• Maintain organized records and ensure that KYC files are readily accessible for audits and compliance checks.
• Offer support to the Trading teams on compliance-related contractual clauses applicable to both physical and derivatives trading.
• Support the identification and assessment of market, credit, and operational risks within the company’s trading activities.
• Assist in the development and implementation of risk mitigation strategies to address identified risks, ensuring that the company operates within its established risk tolerance.
• Assist in external reviews and audits.
• Carry out and support other duties assigned by the Company.

Job Requirements:

• Bachelor’s Degree in Business, Law, Risk Management, Finance, or a related field.
• Minimum of 2 years of experience in risk control, compliance, or KYC role, ideally within the oil trading sector.
• Candidates with experience in using risk management systems (such as CTRM) are preferred.
• Strong understanding of KYC regulations and the oil trading sector.
• Strong analytical skills with the ability to assess risk, and investigate potential issues.Proven ability to work collaboratively and maintain trust and integrity within a team.
• Bilingual proficiency in English and Mandarin is preferred.

Our Client:

Our client is a leading Power and Energy Solutions company, headquartered in Japan. They are actively looking for a Project Administrator cum Documentation Control (2 Years Contract) to join their team in Singapore.

The Responsibilities:

Site Administration Work

• Arrange technical advisors/supervisors’ logistics and including travel arrangements and control of visas, permits etc
• Arrange technical advisors/supervisors’ accommodation
• Check Inward/Outward remittance and update the status for HQ
• Management of office supplies such as Personal Protective Equipment
• Support setting up IT devices for technical advisors/supervisors with guidance of IT Department
• Assistant of the coordination with construction partners

Document Control Work

• Organize and manage drawings at the site office
• Coordinate Overage, Shortage and Damage (“OSD”) goods with construction partner and monitor the status in the headquarter in Japan.
• Organize and manage other miscellaneous documents on site such as additional construction instructions, time sheets, daily work reports, procurement requisitions, etc
• Support organizing and managing installation records, witness test time management, etc. (Assistant for on-site QAQC work in term of document control.)

The Requirements:

• Ideally, full spectrum of both sides of Project Admin and Doc. Control.
• Good solid experience in project admin is most important
• Candidate should be good with coordinations, follow-throughs and understanding, patience with several stakeholders in project sites
• Stable, multi-tasking, knows how to manage the stakeholders in project and site teams, with warm and balanced, customer-oriented personality

RGF Privacy Policy – https://www.singapore.rgf-professional.com/privacy-policy

Disclaimer: The Company complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of their age, race, religion, nationality, marital status, or family responsibilities. A more detailed discussion of the TGFEP is available on the Tripartite Alliance for Fair and Progressive Employment Practices (TAFEP) website at https://www.tal.sg/tafep.

JO Reference: 113074

This is an exciting opportunity to join the APAC Payments Controls Management Team

As a Payments Control Manager Associate, you will support the continuous build out of the end-to-end controls, ensuring that business growth is supported with a strong risk and control foundation. Your role will involve collaborating with the wider Payments Controls team on a regional and global scale to deliver innovative solutions, including data analytics, to help grow and streamline the business. Your unique perspective will be highly valued as the Payments Business relies on the Controls functions to demonstrate strategic thought leadership and implement best in class risk management practices. This role is ideal for someone who is intellectually curious, brings fresh ideas and unique problem-solving approaches, possesses strong process orientation/project management skills, critical thinking, and excellent writing/presentation skills.

Job responsibilities

• Manage control-related activities and provide control related due diligence to business to foster a strong risk and control culture that leverages proven evaluation strategies and sound change management protocols

• Manage internal and external audits, testing activities and regulatory exams which impact Payments across the region

• Collaborate with business, legal, risk, compliance and other partners to devise, monitor and challenge Issues and Actions Plans (APs) to ensure that control gaps are sustainably addressed, ranging from self-identified issues to regulatory enforcement actions

• Work with various stakeholders to determine the applicability and impact of individual regulations to the Payments business, mapping of legal obligations and related CORE processes, risks and controls

• Partner effectively with Controls Managers, colleagues across business, operations and technology control functions to ensure consistent and rigorous operational risk practices and control programs including: Proactive theme-based reviews, identification and mitigation of risks and control design & performance evaluation, impact assessment for regulatory changes

• Work with the Control Manager Lead to conduct operational risk assessment for New Business & Change Management initiatives and provide controls requirements for identified incremental risks

• Support Payment Business/Regional/Local Control Forums; produce MIS / Reporting/ Governance material

• Provide guidance to business in the ongoing testing of controls. Manage escalation and documentation of Risk Events

• Work with location partners to support location oversight and governance

Required qualifications, capabilities, and skills

• Minimum 4 years experience in business controls, operational risk, Compliance, Audit or similar function

• Minimum of Bachelor’s Degree in Finance/Economics

• A strong team player, proactive and problem solver with proven ability to evaluate processes, controls and issues to determine the inherent risks

• Proven ability to communicate effectively (both oral and written)

• Strong analytical, application and problem-solving skills with the ability to exercise sound and balanced judgment; attention to detail and be able to effectively prioritize.

Preferred qualifications, capabilities, and skills

• A level of familiarity with, and interest in Payments business and products

• Understanding of the control framework for Payment business would be beneficial

• Comfortable with and adept at reading and interpreting regulations

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=f8a7451fb939fdade51dedefa73ed9e7

ClearSK Healthcare Pte Ltd manages the award-winning ClearSK® chain of medi-aesthetic centres in Singapore, Shanghai and Hangzhou China. As a Singapore leading aesthetics chain, it will be a great opportunity for you to grow and learn in a multi-disciplinary environment with medical and management professionals. You will find yourself working in a challenging environment, where your capabilities will be developed to the maximum potential.

To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills

Job Responsibilities:

· Report to Financial Controller who is a qualified CPA / Chartered Accountant

· Execute the company’s inventory policy

· Manage the company’s inventory system including stock profiles and locations

· Churning of necessary daily and weekly Inventory/Purchasing reports

· Ensure incoming goods are receipted and managed appropriately in Finance aspect

· Review historical data to build timely forecasts for assigned markets

· Responsible for planning periodic stock checks via audit work and stock takes

· Perform reconciliation or audit after physical counts and liaise with business units to rectify variance

· Monitor inventory stock -cards and systems to maintain safety stock level to avoid ‘’out-of-stock’’ situations

· Audit check on stock flow accuracy

· Timely update stock movement in physical stock-card and inventory system

· Check on supplier invoices

· Assist in other financial matters

Requirements:

· Minimum Diploma or Degree in Finance, Accounting or Business fields

· 2 years of relevant experience preferably from service / hospitality / healthcare / retail industry

· Recent university or polytechnic graduates in relevant fields without work experience but with good attitude and academic records are welcome to apply.

· Candidate who are undergoing CPA training program are welcome to apply

· Experience working in fast-growing SMEs will be an advantage

· Good in planning and organising work flow, with strong in numeracy, analytical and good interpersonal skills

· Proficient in English communication and writing.

· Ability to read, write, and converse in Chinese will be an added advantage as liaising with our counterparts in China and Chinese customers.

· Enjoy working in fast-paced and dynamic environment

· A multi-tasker and learner with self-motivation and integrity

· Strong proficiency in Excel and proficient in Office applications such as Word, PowerPoint and IT systems

Rewards & Benefits

5-day work week

Medical Benefits

Opportunity to embark on Management Trainee Program

Reward and recognition program that appreciate the most competent and brightest

Promotion based on performance

Exclusive staff discounts on our products and services

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on MyCareersFuture:

https://forms.gle/ZdnDCJYqZ916n8iQ7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

ClearSK is an equal opportunity employer and we encourage all qualified candidates to apply.

ClearSK Healthcare Pte Ltd An international aesthetics clinic chain headquartered in Singapore, with presence in Shanghai, Hangzhou and now Kuala Lumper, is looking for suitable candidates for the above positions. In your role you will have opportunities to work alongside doctors, para-medical and finance professionals. For the motivated candidates, this is opportunity to earn high income but also a chance to learn and grow in your career.

To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills

Job Responsibilities:

· Report to Financial Controller who is a qualified CPA / Chartered Accountant

· Execute the company’s inventory policy

· Manage the company’s inventory system including stock profiles and locations

· Churning of necessary daily and weekly Inventory/Purchasing reports

· Ensure incoming goods are receipted and managed appropriately in Finance aspect

· Review historical data to build timely forecasts for assigned markets

· Responsible for planning periodic stock checks via audit work and stock takes

· Perform reconciliation or audit after physical counts and liaise with business units to rectify variance

· Monitor inventory stock -cards and systems to maintain safety stock level to avoid ‘’out-of-stock’’ situations

· Audit check on stock flow accuracy

· Timely update stock movement in physical stock-card and inventory system

· Check on supplier invoices

· Assist in other financial matters

Qualifications and Requirements:

• Minimum Bachelor's degree in Business, Analytics, Accounting, Finance, or a related field
• Good in planning and organizing work flow, with strong in numeracy, analytical and good interpersonal and communication skills
• Enjoy working in fast-paced and dynamic environment independently
• Diligent in checking work to ensure no errors before submitting to superiors for review
• A multi-tasker and learner with self-motivation and sensitive with figures
• Comfortable with computerized data processing and able to comprehend tables and spreadsheet templates
• Diligent in checking work to ensure no errors before submitting to superiors for review
• Familiarity with accounts payable processes and administration
• Exceptional attention to detail and commitment to accuracy

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on MyCareersFuture:

https://forms.gle/ZdnDCJYqZ916n8iQ7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.