Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.

Responsibilities:

• Oversees project costing, budget allocation, expenditure monitoring and cost forecasting
• Reviews the project revenue update and project cash flow
• Oversees Change Order Management and Claims with clients, vendors and subcontractors
• Ensures timely commercial and cost reporting
• Reviews and evaluates vendors and subcontractors CBEs
• Coordinates with respective stakeholders for payment milestone requirements

Requirements:

• Bachelor’s Degree in any Engineering disciplines
• Minimum 5 years of relevant experience as project control manager
• Possess good communication and interpersonal skills

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Yard

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

We are seeking a highly motivated and experienced Quality Control Snr. Executive to join our team. The ideal candidate will have a strong background in ISO and AS certifications, as well as a proven track record in quality control management. In this role, you will be responsible for ensuring that our products and processes meet the highest standards of quality, aligning with ISO and AS certifications. You will collaborate with cross-functional teams to drive continuous improvement, implement best practices, and maintain a culture of quality excellence.

DUTIES AND RESPONSIBILITIES

• Assist in developing, implementing, and maintaining quality management systems based on ISO and AS standards.
• Oversee the day-to-day quality control operations, ensuring compliance with established standards and procedures.
• Providing guidance, training, and support to ensure consistent quality outcomes to quality control inspectors and technicians
• Conduct regular audits and inspections to identify areas for improvement, non-conformities, and opportunities for enhancing quality processes.
• Collaborate with production, engineering, and other departments to establish and enforce quality standards at all stages of the product lifecycle.
• Assist in the development and execution of quality control plans, including sampling techniques, testing methodologies, and documentation procedures.
• Manage the documentation of quality control activities, including inspection reports, test results, and corrective action plans.
• Monitor and analyze quality metrics to track performance and identify trends, presenting findings to management and suggesting improvement strategies.
• Stay up-to-date with the latest developments in ISO and AS certifications, as well as industry best practices, and incorporate them into the quality management system.
• Assist in the preparation of audits by external certification bodies, ensuring all necessary documentation is in place and readily accessible.

REQUIREMENTS

Qualifications and experience:

• Bachelor's degree in a relevant field (Quality Management, Engineering, Manufacturing, etc.); advanced degree or certifications (e.g., Six Sigma, CQE) are a plus.
• Minimum of 3 years of experience in quality control, with a focus on ISO and AS certifications.
• Strong understanding of ISO 9001 and AS9120 Standards, with the ability to interpret and implement their requirements effectively.
• Proven experience in managing quality control teams, driving continuous improvement initiatives, and fostering a culture of quality excellence.
• Proficiency in quality control methodologies, statistical analysis, and root cause analysis techniques.
• Excellent communication skills, both written and verbal, with the ability to present complex technical information to diverse audiences.
• Detail-oriented mindset with exceptional organizational and problem-solving abilities.
• Familiarity with quality management software and tools.
• Strong leadership skills and the ability to collaborate effectively across departments.
• For candidate with extensive experiences will be considered for Asst.Manager/ Managerial role.

Personal Qualities:

• Proactive, driven and resilient
• Able to work independently and as part of cross-cultural team
• Meticulous, accurate and attention to detail
• Professional and calm

Job Responsibilities

• Involve in the analysis, design, documentation, coding, and testing of our applications
• Performing unit and integration testing
• Conducting functional and non-functional testing
• Troubleshoots production problems related to software applications
• Resolves problems and responds to suggestions for improvements and enhancements
• Evaluating current applications to update or add new features
• Ability to work independently on assigned tasks.
• Assist with project plan time estimates and ensure development milestones are met
• Performs any additional duties assigned by the immediate supervisor or senior management

Job Requirements

• Candidate must possess at least a Diploma and above
• At least 1 Year(s) of working experience in the related field is required for this position
• Required Skill(s): Well-versed in ASP.Net (MVC) and knowledge of Microsoft SQL.
• Ability to thrive in a fast-paced environment

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Need to know Zeiss CMM Program

Need to know Zeiss CMM Operation

Have Quality Assurance & Quality Control knowledge.

Know incoming / Inproess / external provider parts inspection.

Know prepare of quality documentation and maintenance documents like daily monitoring Data and monthly Data performance.

Will prepare of documentation for customer audit & ISO audit

Job Description

Your main responsibilities will be:

• To carry out different machining operations on CNC & Conventional machines according to drawings, procedures and specifications
• To be involved in continuous improvement and optimise work processes

Job Requirements

What do you need from me?

• Previous experience on CNC and Conventional machines with an understanding of machining principles
• Ability to read production drawings
• Understand and Primarily Operate CNC Control systems
• Mill turning techniques
• Set and Run various CNC Machines & conventional machines.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

PRINCIPAL ACCOUNTABILITIES

SQP oversees critical and non critical supplier mainly mechanical parts in. SQP is responsible in leading before and after FAS (First Article Submission) qualify and monitor quality performance of new / existing suppliers and ensure uninterrupted supplies of materials and services. He/ She should be able to foster close relationships with suppliers and partners and be able to communicate their value to the company.

JOB RESPONSIBILITIES

1. Lead and Drive First Article Submission for new and existing supplier

Supplier Quality Professional develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier. Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI. SQP shall work with Sourcing and Engineering, to engage and educate suppliers/sub-contractors.

2. Lead quality performance review

Worked closely with suppliers, to monitor conduct audit for vendor performance. Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers. Guide Procurement and team for supplier performance review process.

3. Supplier Development.

SQP shall drive for vendor development, identify and develop new special process to meet turnkey objective and reduce leadtime of supplier.

4. Analyse supply market.

SQP shall propose and execute creative ways to improve supplier process which creates financial value to the organization.

5. Maintain good relationship with stake holders and customer/s

SQP maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality. Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.

6. Develop Product Quality Control Plan

SQP shall also be in charge in developing Quality Control Plan according to the requirements of the customer. He/She shall ensure that required processes and documentations and surveillance points are identified in the QCP. He/She shall liase closely with the customer during development of the new QCP and revision of the existing QCP and its approval (internal and Customer).

7. Customer /Third Party Inspection coordinator

SQP shall manage Customer and Third Party inspection of products/parts. He/She shall ensure that each Quality Control Plan activity which requires surveillance points are monitored and conducted accordingly. He/She will liase and communicate closely with the internal and external customers to ensure that TPI inspections are executed according to the plan schedule.

8. Perform any ad-hoc duties as and when assigned by the superior.

9. All employee of Completion Products Pte Ltd shall observe the highest standards of ethics and integrity in undertaking purchasing activity and act in a honest and professional manner that supports the standing of Completion Products Pte Lts core value.

10. Ensures 5S is implemented in the work area.

11. Adheres company’s guidelines with regards to Safety and Quality.

12. Complies to Company Code of Business Conduct.

13. Support and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments

3. Decision Quality – making good and timely decisions that keep the organization moving forward. Good decisions that are a mixture of analysis, wisdom, experience and judgement.

4. Customer focus – Building strong customer relationships and delivering customer-centric solutions.

5. Drives Result – consistently achieving results, even under tough circumstances. Results might be quantifiable – measured in terms in P&L, sales growth, customer satisfaction ratings, new product launched. Qualitative result -- an enhanced reputation among customers, a more vibrant brand that attracts customer and employee talent.

QUALIFICATION GUIDE

1. Education : Minimum Degree in Technical/Engineering course preferably Mechanical

Engineering

2. Communication : Fluent both in oral and wriiten English communication

3. Experience : Minimum 5 years of working on the same field . Experience in Oil and Gas

manufacturing is an advantage.

OB DESCRIPTION

Job Title

Quality & HSE Engineer

Occupation

QUALITY CONTROL ENGINEER

Job Description & Requirements

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Purpose:

Responsible for performing the final inspection of assembly products to meet Customer's quality standards.

Key Area of Responsibilities:

· Perform In-process and Final Inspection for assembly tools and loose assembly modules to meet the requirement as defined on drawing, WI and any related documents.

· Initiate Material Review Board (MRB) review when part or assembly is not according to requirement as defined on drawing, WI and any related documents during in-process inspection.

· Update outgoing inspection record after Final Inspection to allow monitoring of the internal quality.

· Raise Non-Conformance Report (NCR) for non-conformance found to ensure reject is recorded.

· Support and participate in company continuous improvement program.

Qualification & Experiences:

· Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course

· Preferably with Workplace safety & health in Metal work certification

· Knowledge on quality inspection and buyoff

· No experience are welcome

About Seagate Technology:

Seagate is the leader of mass data storage solution that helps the world store more data and harness its potential with breakthrough cloud storage services, systems, hard drives, solid state drives and many more.

About our group:

Equipment Development Engineering group, EDE in short, is an automated equipment development team that design and develop high precision automated machines that incorporate vision guidance capabilities and inspection. Our vision is to deliver intelligent automated manufacturing equipment solutions to factories through continuous innovation and challenging the impossible mindset. We strive to include IOT, AI, machine learning, data harvesting and data analytics solutions in our development roadmap with the goal of realizing smart manufacturing plant in the near future.

EDE has managed to win a wide spectrum of innovation awards and patents on international and internal corporate scene through best-in-class design. Our team consists of aspiring individuals who specialize in mechanical, embedded system, electrical, software, vision, or multiple disciplines and the good news is we are expanding! We are seeking awesome control engineer to join and thrive in our family. We embrace motivated individual who is a team player and able to work independently. When you join Seagate, you become a vital part of our mission to help safeguard humanity’s prized data. You will learn and help us develop new technologies as part of this quest. Your professional growth is our priority.

About the role:

• Develop control software for precision and high-throughput automated equipment.
• Develop electrical design for automated machine with the assistance of draftsman in creating schematic drawings and BOM creation.
• Collaborate with cross-functional teams to gather requirements, design system architectures, and implement software solutions.
• Implement best practices for software development, including code reviews, testing, and documentation.
• Support and troubleshoot existing automation systems, identifying and resolving technical issues in a timely manner.
• Stay updated on industry trends and emerging technologies to drive innovation and continuous improvement in automation software solutions.
• Perform continuous improvement and enhancement to the existing equipment software toward Smart Autonomous Manufacturing.

About you:

• Self-motivated and eagerness to learn more.
• A positive mindset with a can-do attitude to challenge the impossible.
• A good team player with the ability to work independently.
• Good organizational and time management skills.
• Able to work remotely in an effective manner.
• Might need to travel.

Your Qualification:

• Bachelor’s or Master’s Degree in Electrical and Electronics Engineering, Computer Engineering, or other equivalent disciplines.

Your experience includes:

• VB6, C# and/or C++ OOP and multi-threading PC based software programming.
• Experience in electrical design for machine automation in Class100 cleanroom environment will be very much preferred though not compulsory.
• Knowledge and/or experience in machine vision technology, AI technology, SolidWorks 3D or control automation will be an added advantage.

Ace Assurance Pte Ltd specializes in providing comprehensive general insurance solutions, excluding marine and import/export & credit insurance. In addition, we offer training courses to enhance the skills and knowledge of our team and clients. We are committed to delivering exceptional service and support to our clients while fostering a dynamic and collaborative work environment.

Position Overview:As a Sales Support Executive, you will play a crucial role in assisting the sales team to achieve their targets and provide excellent service to our clients. You will be responsible for administrative tasks, customer interactions, and supporting various sales initiatives.

Key Responsibilities:

• Assist the sales team in daily administrative tasks, including preparing sales reports, maintaining databases, and managing documentation.
• Respond to customer inquiries promptly and professionally, providing accurate information about our insurance products and services.
• Support the sales team in lead generation and follow-up, ensuring potential clients receive timely communication.
• Collaborate with other departments to facilitate smooth operations and enhance the customer experience.
• Participate in training sessions to stay updated on product offerings and industry trends.
• Assist in organizing promotional events and training courses as needed.
• Maintain a strong understanding of the company’s services and offerings to effectively communicate with clients and stakeholders.

Qualifications:

• Diploma or degree in Business Administration, Marketing, or a related field.
• Previous experience in a sales support or administrative role, preferably in the insurance industry.
• Strong organizational skills with the ability to manage multiple tasks and priorities effectively.
• Excellent communication skills, both verbal and written.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint).
• A proactive and customer-focused attitude.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and training.
• A supportive and collaborative work environment.

Ascend Assurance Pte Ltd is a leading provider of general insurance solutions, dedicated to delivering exceptional service and comprehensive coverage for our clients. We are committed to providing innovative insurance products that meet the diverse needs of our customers.

Job Summary:
We are seeking a detail-oriented and proactive Business Admin Support to join our team. The successful candidate will play a vital role in supporting the daily operations of our business, ensuring efficient administrative processes and contributing to a positive work environment.

Key Responsibilities:

• Assist in day-to-day administrative tasks, including data entry, document management, and filing.
• Provide support to various departments, ensuring seamless communication and workflow.
• Maintain accurate records and assist in preparing reports as required.
• Coordinate meetings, appointments, and events, including managing calendars and scheduling.
• Handle correspondence, including emails and phone inquiries, in a professional manner.
• Assist in managing office supplies and inventory, ensuring adequate stock levels.
• Contribute to the development and implementation of administrative policies and procedures.
• Support the team in various projects and initiatives as needed.

Qualifications:

• Diploma or degree in Business Administration or related field.
• Proven experience in administrative support or related roles is preferred.
• Strong organizational skills and attention to detail.
• Excellent verbal and written communication skills.
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).
• Ability to work independently and collaboratively within a team.
• Positive attitude and willingness to learn.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and growth.
• A supportive and collaborative work environment.

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

Centre for Urban Solutions is a research centre in innovative solutions and technologies for urban centres and built environment. The key objective is to support efforts to provide leadership in research and development in innovative solutions for sustainable living and infrastructures for future cities.

The Coastal Protection and Flood Management Research Programme (CFRP) aims to advance knowledge in coastal and flood resilience and spur the growth of a vibrant research and development ecosystem for coastal and flood resilience in Singapore.

The (CFRP) research framework consists of four vertical programmes in which applied research is conducted to generate new knowledge and develop novel, effective, smart solutions for coastal protection and flood management. The framework has three horizontal programmes of broad outcomes that inform and support the verticals. The CFRP will develop innovative multi-functional coastal protection and flood management solutions and will: Catalyse the growth of a local R&D ecosystem to support long-term national agenda; Drive the development and application of effective and smart solutions; Facilitate translation and commercialisation of solutions.

As part of this programme, Vertical 1 Innovative Engineering Solutions, Project 4: Eco-cement enhanced methods for beach erosion control and beach land restoration through soil accumulation in Singapore, will explore eco-friendly and sustainable solutions for coastal protection and land reclamation over beach land inundated by sea level rise.

We are looking for a Research Fellow, based in School of Civil and Environmental Engineering (CEE), to work effectively for advancing the engineering solutions to develop a new Eco-cement enhanced method to form a barrier for coastal protection and land restoration for Singapore and beyond. The role will focus on performing independent and collaborative research to meet the project objectives, developing new solutions, and publishing high-quality journal papers to promote the international reputation of the Centre and the University.

Key Responsibilities:

• Conduct in-depth research on advanced environmentally friendly materials suitable for coastal barrier design and construction, considering durability, environmental impact, and cost-effectiveness.
• Design and oversee laboratory experiments with research team to test the performance and durability of materials under simulated coastal environmental conditions.
• Perform numerical study of the model test. Analyze and interpret data to make informed recommendations for costal protection system design and optimization
• Writing and publication of results in peer-reviewed journals
• Assist in securing external funding through grant applications and proposals

Job Requirements:

• PhD in Coastal Engineering, Biogeotechnical Engineering, Civil Engineering or related discipline
• At least 1-year research experience in related areas.
• Strong background in materials testing, analysis, and selection.
• Experience in ground improvement, geotechnical foundation design, finite element analysis.
• Excellent analytical and problem-solving skills.
• Ability to work collaboratively in a multidisciplinary team.
• Publication track record is an advantage
• Good written and oral communication skills in English - essential for data analysis and communication with stakeholders

Interested applicants are invited to submit a cover letter/full CV/ statement of research interests in one document. Enquiries about this position can be made to Dr. WU Shifan ([email protected]).

We regret to inform that only shortlisted candidates will be notified.

Job Description

• Put up technical statements and requirements for all aspects of Instrumentation, Control, and Automation (ICA) Works, including network development and associated field engineering works.
• Execute procurement functions, including strategic sourcing and supply contracting works.
• Communicate and work very closely with the Procurement Manager and ICA Head for preparation of the invitation of the request for Proposal and administering of the purchase requisition and award consent.
• Maintain and update all procurement documentation and records.
• Support the Instrumentation, Control and Automation Head of Department in budget monitoring.

Job Requirements:

• Diploma or Degree in Electrical, Chemical, or Environmental Engineering.
• Minimum of 3 years of working experience. Applicants with more than 8 years of working experience will be considered as Senior Procurement Executive.
• Experience in Environmental Engineering, particularly in water, wastewater treatment, and Waste-to-Energy (WTE) industries, with a focus on SCADA and DCS is preferred.
• Good oral and written command in English.
• Proficiency in Microsoft Office Suite, including Word, Excel, and PowerPoint.
• Experience with auditing procedures and compliance standards.
• Commercially orientated with good negotiation skill.

Responsibilities

• Monitor stock levels and identify purchasing needs
• Research potential vendors
• Track orders and ensure timely delivery
• Update internal databases with order details (dates, vendors, quantities, discounts)
• Conduct market research to identify pricing trends
• Evaluate offers from vendors and negotiate better prices
• Prepare cost analyses
• Maintain updated records of invoices and contracts
• Follow up with suppliers, as needed, to confirm or change orders
• Liaise with warehouse staff to ensure all products arrive in good condition
• Maintain strong working relationships with our vendors
• Review purchasing agreements with vendors and maintain open lines of communications with those vendors
• Develop an active process for measuring supply inventory and determining purchasing needs based on quarterly and annual numbers
• Stay up to date with industry trends and establish long-term purchasing arrangements with vendors when it is beneficial to the company
• Compare product deliveries with issued purchase orders and contact vendors when there are discrepancies
• Perform other duties as requested by management

Requirements

• Proven work experience as a Procurement Officer, Purchasing Officer or similar role
• Good knowledge of vendor sourcing practices (researching, evaluating and liaising with vendors)
• Understanding of supply chain procedures
• Solid analytical skills, with the ability to create financial reports and conduct cost analyses
• Knowledge of market research
• Experience in import and export of materials and machineries is required
• Excellent communication and negotiation skills
• Mechanical Engineering background is required

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Duties and Responsibilities

• Serve as a technical expert for one or more high power and high voltage converter topologies and control subsystems or features, capable of independent decision making for critical technical issues
• Applies broad knowledge in sensors, power electronics control algorithms, electrical hardware design, software, signal processing, and data analysis methods and tools to drive power converter hardware design, control system and product development to improve product efficiency, minimize losses and increase power density of converter systems
• Leads the development and integration of innovative control system solutions to enable stable, efficient, and reliable production of grid tied power converters
• Leads the design and building of tools that allow debugging, analysis, and evaluation of control system performance. Leads the root cause analysis for control system failures in products for integration and fielded units during escalations
• Leads the electrical converter design and topology selection for improved product features to increase product market penetration and differentiation
• Provide guidance on PCB design, test and evaluation on specific control circuit board including gate driver, microcontroller board and others
• Conduct various device characterizations including design and development of verification test systems
• Lead and perform integration activities with mechanical and firmware team to troubleshoot the control system, design and execute test plans and test automation, and to develop and test the power converters
• Lead in the design failure mode and effects analysis (DFMEA), design for manufacturing, and design for cost reduction efforts
• Support on product certifications and compliance
• Documents work results with requirements, design specifications, procedures, and training materials
• Mentors junior engineers

Knowledge, Skills and Abilities

• Advance power electronics design: In depth knowledge on designing different converter topologies used on advance power electronics systems for the high voltage and high power applications
• Control System Design: Lead the design and development of advanced control systems for power converters, considering factors such as efficiency, stability, and grid integration
• Algorithm Development: Develop control algorithms and strategies for power converters to improve dynamic response, fault tolerance, and performance
• Modeling and Simulation: Create mathematical models and perform simulations to validate control system designs and optimize performance
• Software Implementation: Collaborate with software engineers to implement control algorithms in embedded software and firmware
• Testing and Validation: Design and execute test plans to validate control system performance and robustness
• Hardware Integration: lead and coordinate the integration of control electronics with power converter hardware
• PCB Design and Development: Work closely in the PCB design activities including test and verification
• Documentation: Prepare comprehensive documentation of control system designs, including specifications, schematics, and test reports
• Troubleshooting: Identify and resolve control-related issues during development and product testing phases
• Compliance: Ensure that control systems meet industry standards and regulatory requirements
• Mentorship: Provide guidance and mentorship to junior controls engineers

Qualifications

• Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field
• Minimum of 25 years of experience in electrical hardware design and controls engineering, with a focus on advance power converter systems
• Proficiency in control system design, analysis, and simulation tools (e.g., MATLAB/Simulink)
• Strong programming skills in languages such as C/C++ for embedded systems
• Experience with hardware-in-the-loop (HIL) testing and control system validation
• Knowledge of grid integration, grid codes, and power quality standards is a plus
• Excellent problem-solving skills and attention to detail
• Effective communication and teamwork abilities
• Ability to work in a dynamic and collaborative environment