• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

The Storage Engineer is responsible for the administration, monitoring, and troubleshooting of Storage Area Network (SAN) and backup systems in a 24x7 enterprise environment. This role covers both level 1 and level 2 support for storage-related issues and requires certification and experience with a range of storage and backup technologies. Key technologies include IBM, EMC, NETAPP, Hitachi, Cisco SAN switches, and enterprise backup solutions. The Storage Engineer will ensure seamless operation, maintain system integrity, and support disaster recovery activities.

Key Responsibilities:

1. Storage Administration & Support: Provide installation, configuration, and ongoing administration support for SAN and enterprise backup systems to maintain operational efficiency.
2. Monitoring & Health Checks: Perform regular health checks and monitor storage devices, ensuring early identification and resolution of potential issues.
3. System Integration: Integrate storage hardware and software into the operating environment, ensuring compatibility and optimal functionality.
4. Firmware Updates & Documentation: Conduct firmware updates on storage devices and maintain comprehensive documentation for all configurations and processes.
5. Testing & Validation: Develop and coordinate test plans with customers to verify the full functionality of storage and backup solutions in live environments.
6. Backup Administration: Manage Symantec and other backup environments, including job configuration, scheduling, performance tuning, and troubleshooting of backup-related issues.
7. Disaster Recovery: Execute disaster recovery (DR) protocols for critical systems, ensuring successful restoration of production or DR servers when needed.
8. Storage Subsystem Management: Oversee multiple storage subsystems, including tasks like disk partitioning, LUN assignments, and capacity planning.
9. Zoning & Access Control: Create and manage zones, handle switch-related issues, and define security configurations within the torage subsystems.
10. Capacity Planning & Performance Tuning: Conduct capacity planning, monitor utilization, and tune performance for both storage and backup systems.
11. Data Center Operations: Support data center operations, including power cycling of storage devices, SAN switch upgrades, and participation in DR exercises.

Qualifications & Requirements:

• Education: Diploma or Degree in IT, Information Systems, Computer Science, Business IT, or equivalent.
• Experience:
  • Minimum of 3 years in enterprise backup solutions and SAN environments.
  • Hands-on experience with power cycling, SAN switch upgrades, and storage replication.
  • Exposure to data center shutdown activities and disaster recovery exercises.
• Technical Skills:
  • Proficiency with IBM V3700/V7000, EMC Unity/VNX, NETAPP, HP Nimble, Hitachi, EMC Isilon, and Cisco/Brocade SAN switches.
  • Experience with enterprise backup tools like NETBACKUP, Veeam, and IBM tape libraries.
• Soft Skills:
  • Strong analytical and problem-solving skills, with the ability to work independently.
  • Effective communication skills and customer service orientation.
  • Demonstrated leadership and team collaboration capabilities.
• Preferred Experience: Previous work with government sector clients is advantageous.

INFORMATION

Job Title: Process Engineer - Drive Innovation in Precision Manufacturing!

Company: A leading SME in precision component manufacturing with international presence.

Location: Singapore

ABOUT US

We are a dynamic and growing company specializing in the design and manufacture of high-precision metal components for automotive, appliances, energy, medical, photonics market. We are committed to innovation, quality, and customer satisfaction. We offer a collaborative and rewarding work environment where your contributions will have a direct impact.

ABOUT THE ROLE

We seek an experienced Manufacturing Process Engineer to join Operations team. The successful candidate will optimise manufacturing processes, improve productivity, and ensure high-quality products. This role requires strong technical knowledge, problem-solving skills, and collaboration with cross-functional teams.

KEY RESPONSIBILITIES

● Process Optimization:

○ Analyze and optimize zinc die casting processes to improve efficiency, reduce costs, and enhance product quality.

○ Implement process improvements, monitor results, and adjust as necessary.

● Process Design and Development:

○ Design, develop, and implement new die casting processes and tooling.

○ Collaborate with tooling designers to ensure optimal die design.

● Quality Control:

○ Develop and maintain quality control procedures.

○ Conduct regular quality audits to ensure compliance with industry standards.

● Equipment Maintenance:

○ Ensure proper maintenance of die casting machines and peripheral equipment.

○ Troubleshoot equipment issues and implement corrective actions.

● Safety and Compliance:

○ Ensure compliance with safety regulations and company policies.

○ Conduct risk assessments and implement safety improvements.

● Training and Development:

○ Train production staff on new processes and equipment.

○ Develop and maintain training documentation.

● Continuous Improvement:

○ Identify areas for improvement and propose solutions.

○ Lead or participate in continuous improvement initiatives.

● Collaboration:

○ Work closely with production, maintenance, and quality teams.

○ Communicate effectively with suppliers and customers.

● Project Management:

○ Manage projects related to process improvements, new product introductions, and equipment upgrades.

● Data Analysis:

○ Collect and analyze data to measure process performance.

○ Use data to drive decision-making and process optimization.

CANDIDATE’S REQUIREMENTS

● Bachelor's Degree or Diploma in Mechanical Engineering, Manufacturing Engineering, or related field.

● Minimum 3-5 years of experience in a manufacturing environment, preferably in molding/ casting or a related industry.

● Strong knowledge of metal component manufacturing and tool design.

● Experience with process optimization, lean manufacturing, and Six Sigma methodologies.

● Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

● Strong problem-solving, communication, and project management skills.

● Ability to work in a factory environment and prioritize multiple tasks.

● Advantage if candidate has experience in automation, robotics, and familiar with quality management systems (e.g., ISO 9001).

The Wintel Engineer is responsible for specialized support in planning, installation, and administration of workplace management systems, focusing on endpoint and cloud infrastructure management. This role requires expertise in Windows-based environments, cloud services, and automation tools to optimize the deployment and maintenance of workplace solutions. Responsibilities also include enhancing operational procedures, ensuring system efficiency, and adhering to best practices.

Key Responsibilities:

1. Endpoint Hardware & Imaging Management: Install, configure, test, and maintain endpoint hardware and images, covering OS, applications, drivers, upgrades, updates, and hotfixes.
2. Patch Management & Software Distribution: Plan, implement, and oversee Patch Management and Software Distribution services.
3. Cloud Infrastructure Administration: Design, deploy, and maintain AWS and Azure services, ensuring scalability, security, and high availability. Manage services including EC2, VPC, S3, RDS, Lambda, IAM, Azure App Services, and SQL Database.
4. Cloud-Native Application Deployment: Collaborate with development teams to architect and deploy cloud-native applications, leveraging AWS and Azure capabilities.
5. Infrastructure Automation: Use infrastructure-as-code tools like CloudFormation or Terraform to automate and maintain AWS and Azure environments.
6. Troubleshooting & Issue Resolution: Diagnose and resolve issues related to AWS/Azure infrastructure, applications, and connectivity.
7. Disaster Recovery: Implement and manage backup and disaster recovery strategies for cloud resources.
8. Workplace Management Tools: Administer and troubleshoot backend services, with a focus on PC imaging, workplace management tools, and resolving desktop/server escalations.
9. Quality Assurance & Process Improvement: Conduct Quality Assurance testing on endpoint devices and contribute to the automation and streamlining of daily operational processes.
10. Documentation & Reporting: Maintain accurate documentation and generate reports to ensure clear communication and record-keeping.
11. Additional Duties: Support other duties as required to ensure the efficient operation of workplace management systems.

Qualifications & Requirements:

• Education: Bachelor’s Degree or Diploma in Electrical/Electronic/Computer Engineering or Information Systems.
• Experience:
  • Minimum 5 years of experience with Windows Servers, Active Directory, PowerShell, Group Policy Objects, and workplace management tools (e.g., HC BigFix, MS SCCM, Citrix VDI, Nexthink).
  • Proficiency in PC imaging deployment, patch management, and software distribution for both desktop and server environments.
• Technical Skills:
  • Strong understanding of AWS and Azure services, including infrastructure and automation (CloudFormation, Terraform).
  • Solid networking and security knowledge for AWS and Azure environments.
  • Familiarity with CI/CD pipelines, version control systems (e.g., Git), and scripting languages (Python, Shell).
  • Working experience with MSI technology, application packaging, and deployment processes.
  • Knowledge of custom actions, scripting, and Windows Installer technology for troubleshooting.
• Certifications: AWS or Azure certifications (e.g., AWS Certified Solutions Architect, Azure Administrator) are a plus.
• Soft Skills: Effective communication, documentation experience, strong troubleshooting abilities, self-driven, and able to work independently.

The Systems Engineer, Unix/Linux is responsible for managing and supporting Unix/Linux infrastructure in a 24x7 enterprise environment. This includes operational support, troubleshooting, deployment of updates, and maintaining service continuity to meet business requirements and service levels.

Key Responsibilities:

1. Unix/Linux Infrastructure Support: Manage and support Unix-based IT infrastructure, ensuring stable operations across Unix, Linux, Solaris, Redhat, AIX, and SUSE environments.
2. Troubleshooting & Root Cause Analysis: Provide expertise in diagnosing and resolving server and application issues, delivering root cause analysis as required.
3. Package Deployment: Deploy Unix/Linux packages and bug fixes across Test, Pre-Production, and Production environments.
4. Operational Administration: Oversee day-to-day operations for Unix/Linux environments, adhering to business needs and service level agreements (SLAs).
5. Change Management: Follow established change management protocols for infrastructure changes, including status reporting to relevant stakeholders.
6. First and Second-Level Support: Provide 1st and 2nd level operational support, including initial troubleshooting of third-party applications and collaboration with vendors for resolution.
7. Audit & Compliance: Participate in audit activities, respond to audit findings, and ensure compliance with relevant requirements.
8. Incident Response: Quickly respond to incidents, security alerts, and investigations, implementing temporary or permanent resolutions and providing timely updates to stakeholders.
9. Service Continuity: Implement and maintain continuity measures, such as backup/restore procedures and disaster recovery plans, to support ongoing business operations.
10. Documentation: Ensure all relevant documentation is updated and maintained.
11. 24x7 Support & After-Hours Work: Conduct necessary after-hours maintenance, such as patching, in alignment with the 24x7 operational requirements.
12. Additional Support Activities: Perform other Unix/Linux administrative tasks as needed and travel to other Singapore offices occasionally as required.

Qualifications & Requirements:

• Education: Minimum of a Diploma in Information Technology, Computer Science, or a related field.
• Experience:
  • At least 3 years of relevant experience managing Unix/Linux environments (Solaris, Redhat, AIX, SUSE) in an enterprise-level setting.
  • Strong experience in RedHat Clustering and Oracle Solaris Clustering.
• Technical Skills:
  • Proficiency in scripting languages and tools, such as Perl, Ruby, and AWK.
  • Knowledge of monitoring tools such as SolarWinds.
  • Familiarity with Microsoft technologies (Windows Server, Active Directory, Group Policy) is an asset.
• Work Environment: Typically 9 am to 6 pm, with flexibility required for after-hours work due to the 24x7 nature of the role (e.g., patching activities).

Requirements:

Experience: 4+ years in AWS cloud engineering roles, specifically in support/operations.

Technical Skills: Strong expertise in AWS services setup/management (at a min. S3, IAM, EC2, SageMaker, AWS Networking), monitoring tools, and scripting languages (Python, Bash).

Certifications: AWS Certified Solutions Architect/Developer/DevOps Engineer.

Soft Skills: Excellent problem-solving skills, strong communication, and a proactive approach to managing cloud infrastructure and fairly complex customer driven operations processes

This role requires someone detail-oriented, proactive, and comfortable in fast-paced cloud environments.

Job Description & Responsibilities

• Maintenance of Quality Management System ensuring compliance to internal, and international standards and regulatory requirements for medical devices.
• Develop QMS documents in line with business activity of DxD Hub.
• Ensure the overall document control system supports the QMS.
• Work with technical team to create quality document related to product design, development, and manufacturing, including product test/validation protocols, change management in compliance to applicable regulatory requirements.
• Lead auditor for internal and external audits.
• Conduct management review, ensure QMS stays current and relevant.
• Lead in root cause analysis and CAPA.
• Analyze trends inquality performance.
• Drive improvement in the quality management system.

Job Qualifications

• At least a Master's degree in Science/Engineering or relevant related field.
• Possess at least 4 years of working experience in quality assurance in medical devices; thorough working knowledge of ISO 13485:2016.
• Good working knowledge in managing QMS in a medical device environment in compliance to ISO 13485:2016.
• Competent in quality assurance methodologies.
• Working knowledge in QA processes for design, development, and manufacturing of IVD, SaMD and Integrated Medical Technologies.
• Demonstrated skills in risk management (ISO 14971).
• Knowledge in regulatory requirements for medical devices in ASEAN, USA and EU.
• Strong background in biomedical, computer or engineering sciences.
• Awareness of applicable workplace environment, health, and safety regulations.
• Possess creative skills and problem-solving skills.
• Adeptness in cultivating professional networks and build strategic partnerships.
• Good communication skills.
• Demonstrates strong leadership capabilities and an agile mindset.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description & Responsibilities

• Maintenance of Quality Management System ensuring compliance to internal, and international standards and regulatory requirements for medical devices.
• Develop QMS documents in line with business activity of DxD Hub.
• Ensure the overall document control system supports the QMS.
• Work with technical team to create quality document related to product design, development, and manufacturing, including product test/validation protocols, change management in compliance to applicable regulatory requirements.
• Lead auditor for internal and external audits.
• Conduct management review, ensure QMS stays current and relevant.
• Lead in root cause analysis and CAPA.
• Analyze trends inquality performance.
• Drive improvement in the quality management system.

Job Qualifications

• At least a Bachelor’s degree in Science/Engineering or relevant related field.
• Possess at least 4 years of working experience in quality assurance in medical devices; thorough working knowledge of ISO 13485:2016.
• Good working knowledge in managing QMS in a medical device environment in compliance to ISO 13485:2016.
• Competent in quality assurance methodologies.
• Working knowledge in QA processes for design, development, and manufacturing of IVD, SaMD and Integrated Medical Technologies.
• Demonstrated skills in risk management (ISO 14971).
• Knowledge in regulatory requirements for medical devices in ASEAN, USA and EU.
• Strong background in biomedical, computer or engineering sciences.
• Awareness of applicable workplace environment, health, and safety regulations.
• Possess creative skills and problem-solving skills.
• Adeptness in cultivating professional networks and build strategic partnerships.
• Good communication skills.
• Demonstrates strong leadership capabilities and an agile mindset.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Intern - Quality Assurances & Quality Control Administrator

ARYZTA Singapore is a multinational company, supplying buns and other baked products to QSR restaurants and other wholesale customers. We currently have a position open for an Intern - Quality Assurances & Quality Control Administrator.

Your duties will include:

1. Administer all Quality Assurances data and documents into the system
2. Assist in product evaluation and analysis of project samples to complete the projects to validate/change the process.
3. Assist with product (R&D samples) evaluation to complete shelf life evaluation and compute data (physical measurement).
4. Assist in finished products inspection to ensure the quality of finished products complies with APMEA and clients' expectation
5. Support related departments, for example, the Product Development team, with tasks/projects as assigned.
6. Input QA data and update QA reports by modifying and developing specifications.
7. Provide support with the Product Monitoring program- Moisture test, calibration, Bun Sensory Evaluation etc
8. Attend store visits, vendor audits, photo shoots etc., as necessary.
9. Assist with any other tasks/projects as assigned
10. Other ad-hoc duties assigned

Job Requirements:

· ITE/Degree/Diploma Holder Food Science & Technology Studies or equivalent

· No Working Experience Required. Students are welcome.

· Energetic individual, interpersonal skills and communication skills

· Problem Solving and People-oriented

· Well-versed with MS Office.

We are looking for a person who enjoys dealing with and working with various levels of management and external vendors.

Job Scope details:

Conduct initial meetings to gather requirements and understand the existing infrastructure.

Document the project scope, objectives, and deliverables.

Assessment and Planning:

Assess the current infrastructure and network setup.

Plan the VDI deployment, including resource allocation and network configuration.

Design:

Design the Omnissa architecture, including core components, and DR site setup.

Create detailed design documents covering all aspects of the deployment.

Implementation (DC and DR):

Deploy VMWare Hypervisor and vSphere components (vCenter, vSwitch)

Deploy Windows server machines, Microsoft SQL server, Windows KMS server, Vmware dynamic environment manager and App volume server

Configure Vmware Horizon/Omnissa for users.

Set up the DR site with replication and failover configurations.

Create and deploy master images for VDI desktops.

Implement user profile management and policies.

Provisioning of VDIs for users

Testing and Validation:

Conduct thorough testing of the VDI environment, user testing and failover tests.

Validate the setup with user acceptance testing (UAT).

Training and Documentation:

Provide knowledge transfers for administrators and end-users.

Deliver comprehensive documentation, including as-built documents and operational guides.

Go-Live and Support:

Assist with the go-live process and provide post-deployment support.

Required Loca Cat 2 Clearance prior to onboard candidate.

The Systems Engineer is responsible for providing technical support for Microsoft 365 (M365) applications, resolving technical incidents, and addressing service requests for users. This role also requires handling escalated customer issues to ensure satisfactory business outcomes. Key duties include major incident management, problem and change management, service and process improvements, customer relationship engagement, M365 user onboarding/offboarding, Windows OS support, and participation in end-user computing (EUC) projects, particularly related to M365 products.

Key Responsibilities:

1. M365 Application Support: Offer technical expertise on M365 applications, including Exchange Online, MS Teams, OneDrive, Defender, Intune/Autopilot, SharePoint Online, and core M365 services. Promote best practices for efficient M365 use.
2. Troubleshooting and Incident Resolution: Analyze and resolve issues, collaborating with external vendors and support personnel as needed.
3. System Administration: Perform administrative tasks in Azure Active Directory, including managing users/groups, security permissions, group policies, systems configuration, event log analysis, and resource monitoring.
4. Technical Support Collaboration: Work with the service desk and support teams to troubleshoot, identify root causes, and provide technical assistance.
5. Documentation: Create and maintain documentation, including knowledge base articles, for M365 and EUC services.
6. Employee Training: Deliver training on M365 applications, translating technical capabilities into accessible guidance.
7. Intune and Autopilot Expertise: Provide hands-on support and configuration of Microsoft Intune, focusing on packaging, deployment, reporting, troubleshooting, and policy creation.
8. Windows OS and Desktop Support: Support Windows OS, desktop, and laptop hardware/software, conducting installations per customer requirements.
9. Root Cause Analysis (RCA): Conduct RCA for EUC service issues, including those related to M365 products, as part of the problem management process.
10. Vendor Coordination: Coordinate with support vendors for maintenance and issue resolution as needed.
11. Customer Satisfaction and Support: Collaborate with the team to meet high customer satisfaction levels, acting as the main contact for assessing new workplace products and tools.
12. Project Support for EUC Transition: Support the workplace team and Transition Manager during EUC-related transitions, ensuring a smooth process.

Qualifications & Requirements:

• Education: Degree or diploma in Computer Science or IT.
• Experience:
  • Minimum of 3 years in Microsoft 365 technologies, with significant experience in supporting M365 users.
  • Hands-on experience with Microsoft Intune (including packaging, deployment, reporting, troubleshooting, policy creation, and patching).
• Certification: MS Azure-related certification is mandatory.
• Technical Skills:
  • Proficiency in IT networking for first-level troubleshooting.
  • Knowledge of MS Windows, M365, desktop hardware, and network environments.
• Soft Skills:
  • Strong organizational and interpersonal skills with a customer-oriented approach.
  • Effective verbal and written communication skills.
  • Ability to work independently, manage tasks under pressure, and deliver quality work.
• Flexibility: Willing to work a flexible schedule and travel as needed to multiple sites.

Job Responsibilities:

Architecture

• To provide architectural expertise thereby driving change and improvement in technology and process.
• To contribute to the development of the SSO and LDAP technology roadmaps.
• To liaise with architecture teams in undertaking architectural reviews
• To stay abreast of emerging technologies and technology trends.
• To automatize the process to accelerate the delivery time

Project Delivery

• To take responsibility for the delivery of key projects around SSO and LDAP which are aligned to drive significant change within the platform.
• To work with the Application Production Support project managers in defining, designing, documenting and implanting new functionality for existing and new applications.
• To liaise with the Application Developers in low-level diagnosis of on-going issues.
• To provide subject matter expertise on SSO and IDM technologies to all business application teams.
• To act as technology evangelists for the improvement of process and technology in use for the Authentication services within the client.

Platform Support and Maintenance

• Pro-actively monitor, manage and improve availability and performance of the production environments (from presentation and application layers to Infrastructure layers)
• Pro-actively manage the capacity of production applications

Incident and Problem Management

• To work with partner teams to conduct analysis of major and critical incidents.
• To identify tactical or strategic improvements that can be introduced to help reduce the number of on-going incidents within the SSO and LDAP area.

Change Management

• To work within the change management framework adopted by the client to ensure that all changes to the production environment are planned and executed in a controlled manner.
• To take responsibility for the quality of changes within the SSO and IDM environments, ensuring that changes raised are of sufficient standard in terms of technical and planning detail.
• Attending and sharing knowledge / updates in the Weekly Change Control Board Meetings and the Weekly Problem Management Meetings.

General

• Perform pre-assigned tasks to accomplish the function responsible for. The nature of these tasks are Change The Bank or Run The Bank
• Work cooperatively with the other members of the team
• Ensure adherence to processes and procedures
• Request improvement of knowledge (training) when needed
• Apply own initiative, within the levels of acceptable risk
• Whenever in doubt, escalate and seek advice and guidance
• If the nature of the position is user-facing, then all the guidelines and principles of user service mentality and behaviour should be applied
• Escalate risks / issues to the manager of the team
• Minimise operational failure, including but not exclusively, the risk of fraud, by helping to devise, and by implementing, sufficient regular controls.
• Ensure appropriate escalation to management and/or Permanent Control (or Compliance as appropriate) as soon as an issue is identified.
• Provide a direct contribution to the client operational permanent control framework.

As this is a production support role, focusing across a range of different and mostly innovative technologies, candidates must possess the aptitude and desire to learn. In addition, ability to be on call and provide support out of hours is essential.

Job Requirements

Essential:

Technical Skills essential for the role include, but not limited to:

• CA Siteminder Web SSO
• SOA security - SAML / WS-Security
• Autoprovisioning tools such as BMC ControlSA, Sailpoint, or Forgerock
• LDAP
• Kerberos / SSL/TLS / PKI / GSS-API / SPNEGO
• oAuth2, OpenIDConnect
• IIS/WCF/WIF, WAS security models
• Infrastructure standards for network load balancers, servers, networks and storage
• Automation mind-set with experience in using tools like Ansible
• Scripting skills using Python/JS or shell
• Application Server : Good exposure in configuring and supporting web technologies such as Tomcat, Apache, nginx, IIS
• Proven logical and methodical problem analysis and troubleshooting skills
• Working with an industry recognised service desk and project management toolset
• Clear communicator in both written and oral forms

Desirable:

Technical Skills desirable for the role include:

• Axway Security gateway
• SQL, Database schema
• Authentication services for APIs
• Exposure to Apigee API gateway
• Knowledge of Process & Quality management, ITIL v2/v3
• Microsoft Project, Advanced Excel, PowerPoint and Word
• Knowledge of Atlasian Jira Task Management toolset
• Previously used ServiceNow as a Service Desk Management product

Soft and Interpersonal Skills:

• Very strong analytical skills
• Strong attention to detail
• Structured and methodical mind-set
• Ability to operate with demanding Senior IT Management
• Can do attitude; look at changes as opportunities to improve
• Team oriented
• Good interpersonal and communication skills

Languages:

• High English spoken and written fluent (B2/C)
• French spoken and written will be valued

Qualifications:

• Bachelor in Computer Science or equivalent
• ITIL Foundation certificate will be desirable

Others:

• On Site Services: From 8:00 to 19:00 schedule to cover in weekly shifts of 8 working hours/day
• On Call Services: Out of regular schedule, we provide On Call services (out of business hours) to be covered in weekly shifts by team members.
• Public Holidays: Team members must cover all public holidays except 1st January and 25thDecember (2 persons only in shifts)

Our client is an established Offshore Facilities and Components provider, serving the offshore energy companies, operating all over the world.

It is currently looking for a Lead Piping Engineer for its Singapore’s office.

Job’s Highlight:

· Global company in O&G industry

· Competitive salary

· Medical insurance included Vision & Dental insurance

· AWS/ Bonus

· Equal opportunity| conductive and productive working environment

· Location: North Buona Vista Drive| Nearest MRT Station: Buona Vista MRT

Role:

· The Lead Piping Engineer is to have a strong background in piping design engineering, with the ability to lead and mentor a team of engineers and designers.

· The Lead Piping Engineer is to be conversant with widely recognized piping design requirements, codes and standards which is to be applied to Single Point Mooring (SPM), Topside and Subsea systems. Furthermore, shall be conversant in subsea pipeline design and selection, able to understand load interfaces of the subsea pipelines as well as other interfaces like soil and structural interactions.

· The Lead Piping Engineer is to have a strong background in piping engineering, with the ability to lead and mentor a team of engineers and designers.

· The Lead Piping Engineer is to be conversant with widely recognized piping design requirements, codes and standards which is to be applied to Single Point Mooring (SPM), Topside and Subsea systems. Furthermore, shall be conversant in subsea pipeline design and selection, able to understand load interfaces of the subsea pipelines as well as other interfaces like soil and structural interactions.

· The Lead Piping Engineer should ideally have experience of working in a shipyard environment and have shipyard experience.

Core Responsibilities:

· Technical Lead in developing Piping system design on Single Point Mooring Systems and other product offerings.

· Lead, mentor, and develop a team of piping engineers and designers, fostering a collaborative and high[1]performance work environment.

· Provide technical guidance and support to team members, ensuring adherence to industry standards and best practices.

· Conduct regular team meetings to review project progress, address challenges, and share knowledge. Manage the entire lifecycle of piping systems design deliverables, from the Tendering phase and Front-End Engineering Design (FEED) to EPC (Engineering, Procurement, and Construction) execution.

· Ensure that designs comply with project requirements and that all milestones and deadlines are achieved.

· Continuously monitor project progress, identify potential risks, and implement effective mitigation strategies to ensure successful completion of the project.

· Lead the preparation of essential PIPING SYSTEM DESIGN calculations and deliverables for EPC projects. This includes, but is not limited to, piping and instrumentation diagrams (P&IDs), piping specifications, datasheets, sizing, stress, and pressure drop calculations. Possess some knowledge of process engineering to enhance the integration and effectiveness of piping system designs.

· Oversee the entire piping system vendor requisition process, such as preparation of technical specifications and requirements, from quotation, evaluation, selection, installation, and delivery. Implement cost-saving initiatives and value engineering practices to optimize project budgets. Drive continuous improvement efforts within Piping discipline.

· Travels occasionally to sub-contractor facilities to attend Factory Acceptance Tests and fabrication support respectively.

HSEQ Requirements and Code of Conduct:

HSEQ: Complies with the client's HSEQ Code of Conduct as described in the HSEQ Policies, the 14 HSEQ Standards, and the HSEQ Procedures to always protect people and the environment. Has a duty of care to JOB DESCRIPTION ensure that all personnel work in a manner that is not harmful to their own health and safety and the health and safety of others.

Compliance: Complies with the client's Group Policy Code of Business Conduct and Ethics and expected training at all times.

Financial and Operational Dimensions/Impact and Decision-making Authority:

No budget responsibility, however commercial attentiveness is required as the role requires handling of high value equipment as well as understanding the technical selection has financial consequences.

Minimal Supervision: Objectives, priorities and deadlines are defined

Due to the safety-critical nature of handling hydrocarbons within the client's product line, meticulous attention to detail and a strong sense of technical ownership are essential for ensuring the operational safety of our facilities.

The Lead Piping Engineer must exemplify these qualities, demonstrating exceptional commitment to safety and precision in all aspects of their work.

Work Relationships:

Cultivate good working relationships with technical professionals, including engineers and designers, both within the organization and externally. External relationships include interactions with clients, contractors, and vendors.

Able to guide the development of direct reports, as well as other technical or non-technical team members.

Willing to share opinions, ideas, resources with others and provide constructive feedback and coaching. Foster commitment in the face of major obstacles.

Must be able to communicate well with all parties this role interacts with.

Job Challenges and Problem Solving:

Basic understanding of SPM (Turrets and CALM Buoys) system design aspects is required to work with the relevant disciplines to solve issues which arise. In office and out-of-office self-study of SPM systems is expected to achieve a high level of competency.

Some off-office working hours are expected to communicate with Houston Head Office for project planning and solving issues.

Requirements:

· Educational Qualification: Bachelor’s Degree in Engineering.

· 10 to 15 years relevant experience in Piping/Mechanical Engineering.

· Relevant Experience: Possess hands-on experience of at least 5 years as Lead Piping Engineer of large sized FPSO/Offshore platform/Topsides Modules projects

· Language Proficiencies in English & Chinese as he/ she needs to communicate with the Chinese speaking clients, stakeholders, vendors and staffs

· Software skills: Software: Aveva E3D, Advanced Autocad Skill, Caesar II, Microsoft Word and Excel

· Key Behaviors: Leadership, Good sense of Ownership, Communication, Commitment, Customer Focus, Team Player

· Working Conditions: Office Environment (Working Hours: 8 am to 6 pm). Possible exposure to hazards such as noise, heavy equipment, temperature extremes, chemicals, etc. if working in fabrication or installation sites.

· Can work effectively in a fast-paced atmosphere with multiple priorities and constant change.

(NB: No quotas for the foreigners.)

NB: NO QUOTA FOR THE FOREIGNERS PLEASE.

• This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.
• Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role @ [email protected]/ [email protected] and send your updated CV in MSWORD with the following information: Nationality, Full name, Total yrs. of exp., relevant work exp. for how many yrs., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.

Venture Cove Pte. Ltd.

(EA License # 21C0547| UEN: 202103896W)

138 Robinson Road, Singapore 068906

Website: http://www.venture-cove.com/

Singlife is a leading homegrown financial services company, offering consumers a better way to financial freedom. Through innovative, technology-enabled solutions and a wide range of products and services, Singlife provides consumers control over their financial wellbeing at every stage of their lives.

In addition to a comprehensive suite of insurance plans, employee benefits, partnerships with financial adviser channels and bancassurance, Singlife offers investment solutions through its dollarDEX and Navigator platforms. The mobile-first Singlife Account – with a Singlife Debit Card – allows customers to save, spend, earn and be insured all in one app.

Singlife is the exclusive insurance provider for the Ministry of Defence, Ministry of Home Affairs and Public Officers Group Insurance Scheme. Singlife is also an official signatory of the United Nations Principles for Sustainable Insurance, affirming its commitment to finding a better way to sustainability.

First announced in September 2020 and valued at S$3.2 billion, the merger of Aviva Singapore and Singlife was the largest insurance deal in Singapore then and created one of the largest homegrown financial services companies in the republic.

Responsibilities:

· Leading a team of testers and be responsible for the quality of their work

· Seeks to continuously improve test processes (Root Cause Analysis, Correction and Preventions)

· Implement critical knowledge transfer and communication processes with all teams

· Test Management – Ensure effective and efficient application of test processes and tools using techniques such as White box, Grey Box, Black box, Test-to-Pass, Test-to-Fail and automation

· Responsible for management and coordination of all testing activities on assigned projects including definition of testing approach, test effort estimation, progress and status reporting, training and education on QA processes and tools

· Providing continuous review and recommendations for improvement of processes related to status reporting/dash-boarding and QA

· Coaches and supports team – Knowledge Transfer

· Define project requirements and deliverables based on scope

· Plan coverage projects from initiation through closing states

· Create test coverage documentation, test execution plans, and metrics reports

· Tracking Quality Assurance metrics (e.g. defect density, open defect count)

· Participating in daily stand-up meetings, sprint planning, and sprint retrospectives

· Coordinating with other teams to ensure timely delivery of quality software products

· Ensure compliance with all applicable laws and regulations relating to the above functional activities.

· Plan, monitor and control all testing activities and tasks.

· Automation of the testing process in-sprint Test Automation

· Responsible for analysis, design, test scripts and test suites

· Responsible for timely delivery of different testing automation milestones

· Identify and mitigate the Risk and Issue Management

· Coordinate interfacing systems and teams for integration test activities.

· Manage nonfunctional testing end to end

Experience

· 7-10 years of experience in leading quality assurance for Insurance Domain with 3-4 years hands on experience on Life 400 application testing

· 5 +years hands on experience delivering quality test automation solutions for Applications,

· Mobile (Appium, Microservices, Web (Selenium) and End to End in the field of financial applications testing

· Work in conjunction with the Application Lead to Ensure Software QA practices related to Design Review and Code Reviews are being performed.

· Experience in design and development of the System and Integration Test plans.

· Experience developing test deliverables like test plans, test cases, test data, traceability matrix.

· Ensure that defects are correctly captured, reviewed, prioritized, and triaged and that Break-Fix resources are assigned to resolve defects.

· Experience in working with multi browser and multi devices automation with complex applications

· Expertise in automation of mainframe-based application like AS400

· Experience working in Agile Scrum environments.

· Experience automating through the UI, API and web services from scratch

· Hands on development of automated test scripts

· Should have experience in implementing BDD approach.

· Experience in framework integrate with CI-CD Pipeline with help of DevOps

· Should have experience in Device farm

· Experience in testing, automation, performance and load and security testing.

· Experience of using and implementing a variety of test tools, including tools for test management/planning, defect tracking e.g. Tools JIRA, Confluence,

Education

· Academic: Master’s degree (preferred in computers)

· Professional Certification(s):ISTQ and Automation Tool certificate(preferred)

Working Location: Jurong
Working Days : 5 Days ( Mon- Fri)
Working Hours: 8am-5pm

Salary: $2600 - $2700

Job Description

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Our client’s principal activities are to provide Clients with Full Turkey Project Management. This includes engineering, project management through the pre-construction planning, critical path development, construction / fabrication / site management, commissioning and hand over. It has executed a wide range of major projects involving Marine FPSO Conversion/Process Module Construction related to Oil and Gas Industry, Sub-Sea Products, Semi-Submersibles, Repair of Oil Rigs, Pharmaceutical Process Packages and Power Generation Facilities since its foundation in 1990. This vast experience and Total Commitment to Customer Satisfaction has since earned it a strong reputation in the industry as a reliable local business partner that aspire to exceed our clients’ expectations.

It is looking for a Lifting Engineer.

Job Highlights

• Listed Company with Good Benefits
• Career Growth Opportunity |Trainings for Career Growth
• Competitive compensation benefits
• Cultural Diversity in all departments
• Conductive and Friendly Working Environment
• Permanent role
• Location: Gul Rd, Singapore| Company’s transport available: Pick up service @ designated places

Job Description

Responsibilities:

· Develop a Non-Routine Lifting program and advise the Construction Manager accordingly.

• Develop specific Lift Plans.

• Liaise with the Engineering Department for engineering calculations and drawings as required to develop specific Lift Plans according to his Lifting program.

• Prepares procedure in coordination with vendors for internal shifting and load out operations.

• Wart management for project cargo loading and offloading operation active projects, load out operations by floating crane and Roll on load outs.

• Attend JSA meeting and client RA meeting for the assigned project and report to Section Head/Lifting Superintendent/Production Manager/GMO.

• Assist Engineer in preparing yard layout drawing for module location as per construction and load out sequence by confirmed projects and assisting tender department in lifting and load out feasibility check.

• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.

• Liaise with Lifting / Rigging Superintendent on a day-to-day basis for work progress.

• Liaise with client representatives, classification society surveyors and others to comply with inspection requirements.

• Resolve any technical problems or issues faced at the work site

• Ensuring that the ground conditions are safe for any lifting operation to be performed by mobile cranes.

• Any other ad-hoc duties being assigned by your Superior.

Requirements:

· At least 8 years of experience as a Lifting Supervisor.

• Experience and knowledge in heavy lifting.
• Adaptable to fast paced work environment, able to work under pressure, able to finish assigned work on time
• Excellent written and good communicative skills, able to interact with people of all levels and teamwork
• Must have the relevant certs: Lifting Supervisors Safety Course and Work-At-Height Certificate, etc.
• No job hopper please| Profile with stable working history
• Can start immediate or short period.

Job Related Information:

• Permanent| 5.5 days’ work week | Monday-Friday 8am-5pm, Saturday 8am-12pm
• Head-Office’s Location: 45 Gul Rd, Singapore 629350.

Salary & Benefits

• Monthly Basic Salary: Based on expertise, academic qualification and skills
• OT pay entitlement: OT Flat rate S$8/- per hour
• Healthcare benefits such as Outpatient, Dental, Health Screening etc.
• Cover with insurances, Personal Accident, Hospital & Surgical, Term Life and Work Injury policy
• Variable Bonuses
• 14 days Annual Leave and 14 days sick leave
• Birthday leave / Festival eve half day leave
• NTUC membership – Applicable for only Permanent confirmed staff
• Company transport provided at 5 pickup points:

-Bukit Batok MRT

-Jurong East MRT

- Boon Lay MRT

-Choa Chu Kang MRT (only Morning pickup)

- Woodland MRT (only Morning pickup)

NB

NO QUOTA FOR THE FOREIGNERS PLEASE.

• This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.
• Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role @ [email protected]| and send your updated CV in MSWORD with the following information: Nationality, Full name, Total yrs. of exp. relevant work exp. for how many yrs., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.

Venture Cove Pte Ltd (EA License 21C0547)

138 Robinson Road #12-03 Oxley Tower, Singapore 068906

LinkedIn: http://www.linkedin.com/in/venture-cove-681891249/

Website: http://www.venture-cove.com/

Job Description & Summary

A career in Technology Risk & Quality will provide you with an exciting opportunity to support one of PwC’s key business strategies and contribute towards shaping the firm’s technology risk management strategies in an evolving technology landscape.

The Technology Risk & Quality team provides advice and guidance to PwC digital teams to help them identify and manage the risks associated with the procurement, development and use of technology solutions (including emerging technologies) internally by the firm or as part of the service delivery to PwC’s clients, in accordance with PwC’s policies and standards.

We are currently seeking a suitable candidate to join the team as a Manager. You will work with other team members to help various business and project teams navigate and comply with the requirements of the firm’s technology risk assessment and approval process for the procurement, development and use of new technology solutions. You will help teams to articulate technology risks for the technology solution and to engage with specialist functions in the firm to identify risk mitigation measures and manage risk.

As a manager, you will be expected to help ensure the firm’s compliance with various network technology risk management policies and standards which includes developing and maintaining risk and quality compliance processes, tools and templates.

You will be involved in a broad range of activities which includes working with internal and client facing teams across all the Lines of Service and specialist functions in the firm and the PwC network.

You will provide guidance to business and project teams to identify, assess and advise on the various aspects of technology related risks.

The role will include the following responsibilities:

• Review technology risk assessments and discuss issues with the Technology Risk Director and/or Risk & Quality Partner
• Provide sound advice to PwC professionals across the Assurance, Tax and Advisory practices as well as Internal Firm Services who seek Technology Risk Management input when onboarding or developing new technology solutions
• Develop and/or update solutions to common queries, including relevant practice aids and templates
• Work closely with the Technology Risk Director to plan, design and implement technology risk management processes for the firm
• Provide support, education and training to staff to build technology risk awareness within the firm
• Prepare monthly reports and statistics for internal reporting

Preferred Knowledge/Skills:

• At least 5 years of experience within PwC, another Big 4 or mid-tier accounting firm or relevant industry
• Excellent oral and written communication skills with the ability to provide well-reasoned responses to all personnel grade levels in the firm and across the network
• Strong project management skills with the ability to manage multiple tasks and projects, even when under pressure
• Strong analytical and problem solving skills
• Strong stakeholder management skills
• Be open and adaptable to working in a changing environment
• An excellent team player with the ability to work well with other team members, including sharing and collaborating effectively with others, as well as creating a positive team spirit
• Possess the ability to empathise with the pressures and motivations of client facing colleagues and an ability to win their support with pragmatic advice to bridge the expectations of the business and the requirements of risk management
• Possesses a high level of accuracy and attention to detail
• Takes initiative but keep others informed of progress and escalate issues where appropriate;
• A drive to keep up to date in a fast-paced technology landscape and a sound understanding of how technology can drive efficiency, augment existing services and open new opportunities for the business
• Be an effective coach to junior team members
• Possess a keen desire and ability to learn and deliver timely and quality results to internal clients
• Past experience with technology risk management, general risk management, technology contract review, IT audits, internal audits or compliance will be advantageous, but not mandatory

Language requirement:

Fluency in both spoken and written English.

Job Description

The IT Governance Manager plays a crucial role in establishing and maintaining a robust governance framework within the IT department. This position is instrumental in identifying and closing process and governance gaps, ensuring the alignment of IT practices with organizational goals and regulatory requirements.

KEY RESPONSIBILITIES

Governance Framework Development

• Design and implement IT governance frameworks, policies, and procedures to support the organization's strategic objectives.
• Ensure compliance with industry standards, regulatory requirements, and best practices.

Process Improvement

• Identify gaps in existing IT processes and governance structures and develop action plans to address these deficiencies.
• Lead continuous improvement initiatives to enhance the efficiency and effectiveness of IT governance operations.
• Collaborate with cross-functional teams to streamline processes and ensure consistency across the organization.

Risk Management

• Conduct risk assessments to identify potential threats to IT governance.
• Develop and implement risk mitigation strategies to safeguard the organization's IT assets and data.

Performance Monitoring

• Establish metrics and KPIs to monitor the performance of IT governance and process improvement initiatives.
• Prepare and present regular reports to senior management on the status of governance and process improvement efforts.

Stakeholder Engagement

• Engage with key stakeholders to gather feedback and ensure alignment of IT governance initiatives with business needs.
• Provide training and support to staff on IT governance and process improvement practices.

QUALIFICATIONS / EXPERIENCE

• Bachelor degree in information technology, Computer Science, or a related field.
• Minimum of 5 years of experience in IT governance, risk management, or a related discipline.
• Proven track record of identifying and closing process and governance gaps.
• Strong understanding of IT governance frameworks and industry standards (e.g., COBIT, ITIL, ISO/IEC 27001).
• Excellent analytical and problem-solving skills.
• Strong project management and organizational skills.
• Excellent communication and interpersonal skills, with the ability to engage and influence stakeholders at all levels.
• Proficiency in using governance, risk, and compliance (GRC) tools and software.

Job Profile Summary:

In this role, you drive continuous change and improvement in the IT Division by taking initiative and ensuring plans are setup, monitored and implemented. You will work closely with various stakeholders to manage the IT Division Portfolio in the themes of budgets, resources, IT deliveries and key milestones. This role will focus on the financial oversight and management of the IT Division's budget and includes planning, forecasting, and tracking IT expenditures, as well as ensuring alignment with the organization's financial strategies and objectives. The role requires collaboration with stakeholders to manage budgetary concerns and provide financial insights for IT projects and initiatives. This position reports to the Head of IT Portfolio Management

Job Description:

• Support the overall management of the IT Division's budget, including forecasting and expenditure tracking.
• Implement financial tracking and reporting methodologies to assess budget performance and forecast future financial needs.
• Manage the review and approval process for IT engagements and budget requests, ensuring compliance to organisational policies.
• Respond to inquiries regarding IT budget information and provide timely and accurate reports to stakeholders.
• Support in the management of the IT Division resources and planning.
• Support in the governance of the Software Development Lifecycle (SDLC) procedures, ensuring adherence of the policy, standards and procedures for software and platform development.
• Support the facilitation of the Change Advisory Board (CAB) process and ensure compliance for all change and releases.
• Schedule, organise, collate, and socialise IT Portfolio information among various stakeholders as required.
• Drive or participate in the delivery of IT Division initiatives in meeting required milestones.
• Support internal and external audit or assurance related activities.

Who we are looking for:

Competencies & Personal Traits

• A track record of working in dynamic environments independently with minimal supervision.
• Strong sense of ownership and commitment to deliver responsibilities in a timely manner.
• Excellent verbal, written and interpersonal communication skills.
• Organised and detail orientated, with a willingness to embrace tools to work more efficiently.

Working Experience:

• At least 2 years of working experience with portfolio management and/or managing mid-sized IT projects through Agile and/or Waterfall methodologies.
• At least 3 years of working experience with financial management and budgeting within an IT context.
• Understanding of IT project delivery concepts and their financial implications.
• Experience in the facilitation of governance, budget review, steering and other project / portfolio related meetings.
• Experience in stakeholder management, especially senior management highly desirable.
• Knowledge in JIRA, Confluence, advanced Excel or scripting highly desirable

Education:

• Bachelor degree (Business, Finance, IT or equivalent)
• Finance, Insurance, IT and/or Project management certifications / qualifications highly desirable

Language:

• Good written and spoken English

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Conduct system performance tests, data analysis, and troubleshooting to ensure optimal functionality of mechanical, software, and hardware components.
• Execute validation protocols for automated systems, ensuring compliance with industry standards and regulations.
• Collaborate with cross-functional teams, including design, manufacturing, and quality assurance, to identify validation requirements and methodologies.

Requirements:

• Diploma and above
• At least 2 years of experience in validation engineering, particularly with automated systems.
• Experience with robotics, control systems, or advanced manufacturing technologies.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Responsible for the design of controls system and programming coding.
• Modify controls design and other documents according to the company standards and compliance to industry standards.
• Develop specific program as per project requirements based on company coding standard.
• Support in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.

Requirements:

• Diploma in any relevant engineering discipline
• At least 5 years of PLC experience in using Allen Bradley and Siemens-S7 programming.
• Good communication and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a distributor of automotive and industrial solutions.

• Manage and configure network devices such as firewalls, routers, VPNs, internet proxies, and wireless networks.
• Optimize enterprise networking, including WAN, LAN, and VPN implementations and support.
• Monitor system performance and troubleshoot issues to ensure optimal performance and reliability.

Requirements:

• CCNA certified
• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of experience in Infrastructure Engineering.
• Good knowledge with internet architecture designs (TCP/IP, DNS, DHCP, Proxy and Firewall).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

GO ID: https://go.persolkelly.com/job/apply/8846

Job title: Quality Technician
Duration: 1 year (renewable and convertible)
Location: Woodlands
Salary: Up to $2.5k + 1 month completion bonus
Working hours: 8am to 5pm, Monday to Friday (OT may be required)


Job Description:

• Update information into SAP notification
• Handle SAP transaction
• Coordinate rework activities on-site
• Manage notification to supplier
• Inspection of material
• Perform scrap notice

Requirements:

• Detail-oriented for data accuracy
• Physical movement of parts require
• SAP Knowledge
• Microsoft Outlook, Excel and PowerPoint
• Technical Drawings
• Inspection tools e.g. vernier caliper

We regret to inform you that only shortlisted candidates will be notified.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/8846

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)