Minimum experience of 4 to 6 Years

Installing and upgrading operating systems and computer software.

Helping on software or hardware upgrades.

Installing the Applications, Software’s on End user devices.

Installing and maintaining hardware and computer peripherals.

Exposure on SDM tools like SCCM, Tanium, End Point Central, KACE is added advantage.

Working on Banking Infrastructure Environment is an Additional Advantage.

Knowledge on Windows Server 2012/2016.

Providing basic training in computer operation and management.

Troubleshooting hardware, software issues, Network Connectivity issues. Responding to client support requests.

Key Job Accountabilities (Actual daily deliverables):

On line support to machine troubleshooting.

• Immediate machine failure troubleshooting and repair, handler conversion & setup capabilities, setup yield monitoring, machine UPH accountabilities.

Responsible for Housekeeping, spares and other logistical property control.

• Consistent maintain on a system to improve setup tidiness, cleanness, proper tools inventory and ownership practice.

Ensure handler performance optimization.

• To ensure maximization of plunger / index arm, pick & place arm, speed control to reach maximum utilization & handler UPH efficiency as well as setup performance.

Ensure effective OCAP execution to sustain setup performance

• Ability to perform effective line OCAP, apply systematically socket & load board ocap execution.
• Ensure do escalation on tester repair after load board ocap done but problem persisted
• Ensure do escalation on handler if jam rate occurrence more than 6 times/day
• Do Socket Monitoring Dashboard monitoring on socket insertion lifespan reached limit & replace socket immediately
• Ensure setup time & unscheduled downtimes meet KPI based on Mean time to repair (MTTR) & Waiting time (WT)
• Do shift handover & communication with incoming/outgoing for outstanding issue follow up continuation

Required Experience and Qualifications (Required knowledge, skills and experience---however acquired):

• Requires knowledge in electronics and mechanical principles and through understanding of Final Testing ATE machine & technology is an advantage.
• Requires through knowledge of practical applications of concepts, procedures and guidelines to solve extremely complex problems
• Meticulous, independent, analytical and possess good / positive interpersonal skill. Must be a team player and hard working.
• Diploma in Electrical / Electronics / Mechatronics Engineering or its equivalent (E3)
• Minimum Higher NITEC / NITEC in Electrical / Electronics / Mechatronics Engineering or its equivalent with minimum of 5 years experience in Final Test Line Support operation is an advantage.

Job Description

• Responsible for schedules and forecasts of project development.
• Work with relevant personnel to rectify any electrical issues.
• Involve in design electrical works and make sure specifications are in line with Authority’s code of practice and requirement.
• Liaise, coordinate, and monitor project progress to ensure that schedule is on time as planned.
• Prepare method statement, risk assessment, construction drawing, catalogue submission, safe work procedure and all other documents as requested by site.
• Plan, manage and coordinate all site matters, ensuring compliance to Project specifications, regulations and schedules.
• Technical specification review and recommend appropriate resolution.
• Directs, supervises and train technicians on engineering activities on site to meet all project requirements.
• Actively use the right tools to collect and observe data to ensure good coordination with team activities and communicates project status through technical reports.
• Co-ordinate and attend meetings with the Structural, Architectural, and other M&E contractor, sub-contractor, consultant, and client’s representatives to resolve project related problems and issues.
• Monitor project cost activity to take actions on cost deviation.
• Attend and conduct of Factory Testing and Site Testing and Commissioning of system
• Collect all necessary accurate data and share information pertaining to project issues, budgets, and schedules in project meetings.

Job Requirements

• Strong technical ability to develop, optimize designs for analogue and digital mixed circuit design, microcontroller and embedded system for electro-mechanical system
• Proficient in 3D CAD software (such as Altium, SolidWorks Electrical etc), in creating electrical schematic, cabling drawings, PCBA
• Good knowledge and experience in performing simulation and analysis and technical review of PCBA and circuit design (analogue, digital, power)
• Good knowledge and hands-on experience for EMI/EMC. Knowledge on EE design standards (IEC, IPCs etc) for medical device is an added advantage
• An analytical problem solver to identify root cause, devise/evaluate/recommend optimal solutions to prevent future issues
• Natural ability to communicate technical information, and build interpersonal relation with the team members
• Able to work independently, self-motivated and organized with good teamwork skills

1. To coordinate and manage electrtical and ELV works

2. Ensure all electrical works are performed on time, within budget and in compliance with all necessary standards, code of practice and safety regulations

3. Responsible for the supervision and coordination of M&E services at project site

4. Understand Main Contract /Subcontract requirement

5. Monitor progress, quality of workmanship and compliance.

6. M&E coordination and liaison with Architectural Coordinators and Design Engineers.

Key Responsibilities:

Compliance with SFA Regulations:

• Stay updated on all relevant SFA regulations pertaining to meat production.
• Ensure that all production activities adhere to SFA guidelines and requirements.
• Collaborate with regulatory agencies for inspections, audits, and certifications.

Quality Assurance:

• Develop and implement quality assurance and control procedures for meat production.
• Monitor and evaluate the quality of raw materials, production processes, and finished products.
• Investigate and resolve quality issues promptly to maintain product integrity.

HACCP Implementation:

• Oversee the Hazard Analysis and Critical Control Points (HACCP) program.
• Establish and maintain HACCP plans, conduct hazard assessments, and update as necessary.
• Train and educate staff on HACCP principles and procedures.

Supplier Management:

• Evaluate and manage relationships with meat suppliers to ensure the quality and safety of incoming raw materials.
• Implement supplier audit programs and maintain supplier quality standards.

Team Leadership:

• Build and lead a dedicated QA team, providing guidance, training, and mentoring.
• Ensure team members understand their roles and responsibilities in maintaining quality and safety standards.

Continuous Improvement:

• Identify areas for process improvement and cost reduction while maintaining or improving product quality.
• Implement corrective and preventive actions to address non-conformities and prevent reoccurrence.

Documentation and Reporting:

• Maintain accurate and comprehensive records of quality control activities.
• Generate reports for senior management, regulatory agencies, and internal audits.

Emergency Response and Crisis Management:

• Develop and execute crisis management plans for food safety emergencies.
• Coordinate with relevant authorities and stakeholders during crisis situations.

Requirements

• Bachelor’s degree in food science, Food Technology, or a related field. A Master's degree is a plus.
• Minimum of 5 years of experience in meat production, with at least 2 years in a managerial or supervisory role.
• In-depth knowledge of SFA regulations and guidelines related to meat processing and production.
• Certified in HACCP and food safety management systems.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills.
• Problem-solving and decision-making abilities.
• Attention to detail and a commitment to quality.
• Ability to work under pressure and handle food safety emergencies effectively

Full Job Description

Job Description

• Responsible for schedules and forecasts of project development.
• Work with relevant personnel to rectify any electrical/mechanical issues.
• Involve in design works and make sure specifications are in line with Authority’s code of practice and requirement.
• Liaise, coordinate, and monitor project progress to ensure that schedule is on time as planned.
• Prepare method statement, risk assessment, construction drawing, catalogue submission, safe work procedure and all other documents as requested by site.
• Plan, manage and coordinate all site matters, ensuring compliance to Project specifications, regulations and schedules.
• Technical specification review and recommend appropriate resolution.
• Directs, supervises and train technicians on engineering activities on site to meet all project requirements.
• Actively use the right tools to collect and observe data to ensure good coordination with team activities and communicates project status through technical reports.
• Co-ordinate and attend meetings with the Structural, Architectural, and other M&E contractor, sub-contractor, consultant, and client’s representatives to resolve project related problems and issues.
• Monitor project cost activity to take actions on cost deviation.
• Attend and conduct of Factory Testing and Site Testing and Commissioning of system
• Collect all necessary accurate data and share information pertaining to project issues, budgets, and schedules in project meetings.
• Prepare progress report and project handover report.
• Execute other assigned tasks as delegated by immediate superior.

Job Requirements

• Bachelor’s degree/ Diploma in Electrical or Mechanical Engineering or related discipline
• 3 years of working experience in construction industry
• Knowledge for Mechanical, Pumping System, ACMV, CCTV, Electrical or Control System or SCADA system will be an added advantage

Job Descriptions:

• Establish customer orders through maintaining positive relationships and organizing customer visit schedules for both existing and potential clients.
• Foster robust business connections, generating new sales opportunities.
• Monitor market trends and predict sales volume to stay proactive in adapting strategies.
• Conduct impactful sales presentations to effectively persuade potential customers.
• Enhance customer dedication by providing professional after-sales support.
• Address complaints promptly, resolving issues to ensure customer satisfaction and protect the company's reputation.
• Negotiate agreements, monitor payments, and maintain comprehensive sales and data records.
• Regularly update and maintain reports for the management team.
• Undertake additional responsibilities as assigned on an ad-hoc basis.

Job Requirements:

• Possess a Professional Certificate, Diploma, or Bachelor’s Degree in Marine Engineering or a related field.
• Minimum of 1-2 years of experience in Sales, specifically with marine engines, heavy equipment, and cranes.
• Good communication skills.
• Exhibit excellent communication and presentation skills, coupled with the ability to build strong relationships.
• Showcase an aggressive passion for professional growth along with strong leadership qualities.
• Capable of working independently while maintaining a collaborative team spirit.
• Own a car and possess a valid class 3 license will be preferred

Job Description & Requirements

Job Description & Requirements

Responsibilities/Duties:

1. Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
2. Managing and planning the construction project.
3. Controlling the cost of the materials and labor.
4. Attend site meeting, inspection and monitoring of project progress.
5. Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
6. Monthly project status reports and change orders.
7. To manage the daily operation of the project execution.
8. Advising the workers on the construction process and addressing their concerns.
9. Obtaining the construction materials and verifying them.
10. Scheduling the construction work of the day.
11. Ensuring that the project starts on time and ends within the estimated duration

Job Specifications/Requirements:

1. Have prior 3 year working experience in construction industry (exp with Interior Work (Singapore) will be an advantage. )
2. Must possess good communication skills.
3. Relevant site experience.
4. Knowledge in Microsoft office (Excel, Word).
5. Have excellent problem solving skills
6. Good team player and customer-focused with excellent communication skills
7. Able to work independently with minimum supervision.
8. Able to work under pressure with high initiative.
9. Company benefits @ Yearly Performance Bonus @ Allowance @ Medical Leave @Annual Leave @ Transport Allowance or Company provide transport @ Singaporean and PR are Welcome

The Job

1. PLC & PC based programming for customized automation machines
2. Vision Camera Inspection System and related programming
3. Various testers (High Potential testers, Leak testers)
4. Electronic Camming to control servo motor driven motions
5. Sourcing and costing of related EE components

The Requirements

1. ŸDiploma/Degree in Electrical Engineering with at least 2-3 years’ relevant experience.
2. ŸRelated experience in design and development of customized automation machines.
3. Must be able to write application programs for PLC such as Omron, Allan Bradley control logix, Siemens S5, S7, Keyence, Beckhoff etc.)
4. PC based (visual basics, C++) familiar to apply both hardware and software for machine controls
5. Hands on, able to guide technicians on schematics, EE layout etc
6. Occasional Travelling required

Others

• Working location: Woodlands
• Working hours: Monday to Friday, 8.30am – 5.30pm

• Assist Project Manager on planning to ensure that materials, manpower, machineries, authorities approval and site conditions are ready before the work starts.
• Supervise work for the contract and ensure that it is done in compliance with the contract specification including confirming and verifying that the work is done.
• Manage the project to ensure that work is carried out in a manner that meets the quality, environmental, health and safety objectives and targets set out by the management.
• Coordinating with authorities, clients and vendors.
• Preparation of shop drawings and as-built drawings.
• Candidate must possess at least a Bachelor's Degree in Civil Engineering recognised by Professional Engineers Board (PEB).

• Assist Project Manager on planning to ensure that materials, manpower, machineries, authorities approval and site conditions are ready before the work starts.
• Supervise work for the contract and ensure that it is done in compliance with the contract specification including confirming and verifying that the work is done.
• Manage the project to ensure that work is carried out in a manner that meets the quality, environmental, health and safety objectives and targets set out by the management.
• Coordinating with authorities, clients and vendors
• Preparation of shop drawings and as-built drawings.
• Candidate must possess at least a Bachelor's Degree in Civil Engineering recognised by Professional Engineers Board (PEB)

Industry/ Organization Type: Manufacturing/ Production

Position Title: Lead Process Engineer (Injection Moulding)

Working Location: North - Yishun

Working Hours: 5 days (Mon – Fri, 8.30 am – 5.30 pm)

Salary Package: Up to SGD 8000 + Performance Bonus

Duration: Permanent

Key Responsibilities

• Establish process conditions through scientific moulding for existing/new products

• Troubleshoot moulding processes and material or equipment issues

• Evaluate tooling for areas of concern, areas of improvement for quality and efficiency, and recommend improvements to optimize moulding, set up, and overall manufacturing

• Collect and analyse data on individual processes to identify and improve process capability

• Document and maintain Mold process sheets for accuracy

• Support process technicians through training in scientific moulding practices

• Leadership role in continuous improvement and cost reduction activities

• Use Lean Manufacturing, Six Sigma, and other techniques to analyze process data to determine capabilities as well as improvements

• Manage projects, and ensure all tooling is executed smoothly and efficiently against an agreed plan

• Perform evaluation and development activities to provide solutions for technical problems to sustain and improve production yield, quality, process cycle time and cost reduction

• Lead team in problem-solving – identification of problems and analysis of the root cause

• Conduct proof of concept (POC) evaluation and design of experiments (DOE) during development, establish baseline process and metrics

• Lead design of experiments (DOE) to establish a stable and robust process that can be handed off to production personnel •

Requirement

• Diploma in Engineering or Sciences

• Min. 5 years’ experience in plastic injection moulding environment

• Experience in process capability studies and tooling technical incline is a plus

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Descriptions:

• Product delivery training to distributors and customers
• Provide diagnosis guidance and analysing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.
• Willingness to work beyond office hours if required and any other ad-hoc duties assigned from time to time.
• Meticulous and self-motivated; cooperate and comply.

Job Requirements:

• Diploma and/or certificates in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.

We are seeking a dedicated and detail-oriented Quality Control Associate to join our team. This entry-level position is open to fresh graduates and individuals with up to 2 years of experience. The Quality Control Associate will play a vital role in ensuring the quality and compliance of our products through rigorous testing and inspection processes.

Key Responsibilities:

1. Product Inspection:Conduct thorough inspections of raw materials, components, and finished products to ensure compliance with quality standards.
   Identify and document any deviations from quality specifications.
   
2. Documentation:Maintain detailed and accurate records of all quality control activities.
   Record and report test results, deviations, and corrective actions taken.
   
3. Quality Assurance:Support the development and implementation of quality assurance processes.
   Collaborate with the quality control team to improve and streamline procedures.
   
4. Collaboration:Work closely with production and manufacturing teams to address quality concerns in real-time.
   Communicate effectively with cross-functional teams to achieve quality objectives.
   
5. Continuous Improvement:Contribute to the identification of areas for process improvement.
   Participate in discussions to enhance overall product quality.
   
6. Compliance:Ensure adherence to industry regulations and company quality standards.
   Stay updated on changes in quality control practices and regulations.
   

Requirements:

1. Experience: Fresh graduate to 2 years of experience in quality control or a related field.
2. Analytical Skills: Strong analytical and problem-solving abilities.
3. Attention to Detail: Exceptional attention to detail and accuracy in work.
4. Communication Skills: Effective verbal and written communication skills.
5. Team Player: Collaborative mindset and ability to work effectively within a team.
6. Adaptability: Willingness to learn and adapt to new testing methodologies and technologies.
7. Regulatory Awareness: Basic understanding of industry regulations related to quality control.

This is an excellent opportunity for an entry-level professional to gain valuable experience in quality control within a dynamic and growing organization. If you are passionate about ensuring product quality and compliance, we encourage you to apply for this position.

Perform servicing on electronics equipment and testing using Multimeter and other instruments

Provide troubleshooting, repair, maintenance on Printed Circuit Board ( PCB ) , power supply & electroincs equipment

Perform electronics & electrical functional testing

Figure out and replace electronics faulty components, using soldering iron, sucker with proper type of spare parts replacements

Install electronics part into specified locations using proper hand tools and specifications

Perform documentation for repair success rate and spare parts inventory

Job Requirement:

Minimum NTC-3 in Electronics /Electrical related field; prefer Electronics related will be added advantage

Minimum 2-3 years of Electronics/electrical repair and experience in good soldering skill , repair of power supply, PCB

Strong knowledge of electrical circuit theory and advance soldering skills

Great interpersonal and customer service skills

Good logical thinking and attention to details

Self-motivated and independent

Responsiblities:

• Develop, update and implement food safety management system (ISO 22000) to ensure products produced meet customer and regulatory requirements
• Manage and facilitate internal and external audits
• Assist to ensure all PRP requirements are met
• Liaise with external laboratory on microbiological testing
• Lead in prompt investigation and resolution of customer feedback or complaint
• Develop and conduct appreciate training in all aspect of food quality and safety
• Other duties as assigned by management

Requirements:

• Diploma/Degree in relevant studies
• Min 1-2 years experience
• 6 days work

Responsibilities

• Conduct experimental research on various properties of the Company’s products, as well as analysis and tests to investigate the chemical phenomena of products.
• Responsible for new product testing, development and prototype production; as well as assisting customers during material evaluation and qualification phases with the Company’s products.
• To work closely with customers in the development of suitable material configurations to meet customer needs and providing technical support to them.

Requirements:

• Degree in Chemical Engineering / Chemistry / Materials Science / Polymer.
• At least 1 – 2 years of working experience in similar capacity. Those with more than 3 years of experience will be considered for Senior Engineer's position.
• Knowledge of polymer science and semiconductor materials composition.
• Knowledge of IC package encapsulant and semiconductor back-end processes.
• Knowledge in material characterization and/or FA equipments is preferred.
• Experience in DOE, FEM and numerical analysis would be advantageous.
• Innovative, meticulous, analytical with initiative.
• Must be a team player and strong work commitment.
• Fresh graduates with good degree & strong interest in research and development work are also welcome to apply.

Job Description

We are hiring a facilities engineer to be part of a dynamic facilities management team responsible for the operation and maintenance, modification and replacement works of the building’s mechanical and electrical systems.

Description

• Responsible for day-to-day operations and supply of utilities (e.g. Electricity, Water, Air Conditioning) to support company operations.
• Responsible for operations and maintenance of facilities related equipment and system e.g. Chilled Water System, ACMV, Compressed Dry Air System, Fire Protection System, Electrical Distribution System, Lifts, Platforms and Cranes etc.
• Implement preventive maintenance programs for all M&E systems.
• Work with procurement for service contracts and liaise with relevant service providers and contractors to implement rectification works.
• Ensure facilities department is always in compliance with all local and government regulations.
• Work closely and manage external vendors for soft services e.g. Security, Cleaning, pest control etc. and technical services (i.e. M&E systems).
• Work with users on facilities related repairs, enhancement works and renovation projects.
• Work with management on facilities equipment modification and replacement works.
• Drive continuous improvement in all aspects of facilities operations in terms of cost, processes, performance and efficiency.
• Support various company level audits from facilities aspect to ensure full compliance of the audits.
• Handle CAPEX and special projects as assigned by Facilities Managers.
• Participate in Workplace Safety and Health Committee (WSHC)
• Other duties as assigned by Facilities Management.

Requirements

• Possess a Degree / Diploma in Engineering or professional qualification in Engineering or Facilities Management, with min. 3 to 5 years of relevant experience.
• Sound knowledge in building maintenance, mechanical and electrical (M&E) operations and maintenance, technical services or construction works.
• Experience in building automation system will be an added advantage.
• Facilities related certification and/or accreditation (e.g. SCEM, FSM, GMFM) will be an added advantage.
• Proficient in MS Office Applications (Word, PowerPoint and Excel).
• Possess good interpersonal and problem solving skills.
• Able to support facilities operation and maintenance after office hours when needed.

Industry/ Organization Type: Manufacturing/ Production

Position Title: Lead Process Engineer (Injection Moulding)

Working Location: North - Yishun

Working Hours: 5 days (Mon – Fri, 8.30 am – 5.30 pm)

Salary Package: Up to SGD 8000 + Performance Bonus

Duration: Permanent

Key Responsibilities

• Establish process conditions through scientific moulding for existing/new products

• Troubleshoot moulding processes and material or equipment issues

• Evaluate tooling for areas of concern, areas of improvement for quality and efficiency, and recommend improvements to optimize moulding, set up, and overall manufacturing

• Collect and analyse data on individual processes to identify and improve process capability

• Document and maintain Mold process sheets for accuracy

• Support process technicians through training in scientific moulding practices

• Leadership role in continuous improvement and cost reduction activities

• Use Lean Manufacturing, Six Sigma, and other techniques to analyze process data to determine capabilities as well as improvements

• Manage projects, and ensure all tooling is executed smoothly and efficiently against an agreed plan

• Perform evaluation and development activities to provide solutions for technical problems to sustain and improve production yield, quality, process cycle time and cost reduction

• Lead team in problem-solving – identification of problems and analysis of the root cause

• Conduct proof of concept (POC) evaluation and design of experiments (DOE) during development, establish baseline process and metrics

• Lead design of experiments (DOE) to establish a stable and robust process that can be handed off to production personnel •

Requirement

• Diploma in Engineering or Sciences

• Min. 5 years’ experience in plastic injection moulding environment

• Experience in process capability studies and tooling technical incline is a plus

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

ASMPT's software engineers are responsible for semiconductor equipment software development, which includes:

• Implementing user interface for machine operations.
• Manufacturing process automation through robotic control
• Integration with machine vision software for alignment and inspection
• Implementation on industrial standard network protocols to communicate with manufacturing execution systems
• Provisions for Industry 4.0

Job requirements

• Min. Degree or higher in Computer Science / Engineering / Mathematics / Physics or relevant disciplines
• Proficient in C/C++ and application programming
• Good knowledge of multi-threading, object-oriented programming, design patterns and UML state charts
• Hands-on experience in developing software in MS Windows, Visual Studio or Linux

• Maintain and refine a change management systems roadmap and quality mindset programs going forward for WW alignment and continuous improvement of equipment and change control practices.
• Partner with Fabs, SMAI, OCT, CPIE, TD, and IT to ensure all business needs and processes are properly documented, validated, and escalated as needed.
• Provide technical leadership and direction
• Evaluate global needs for new change control and risk assessment systems.
• Cultivate global relationships. Support and mentor quality engineering teams worldwide by providing guidance.
• Work with subject matter experts to identify business process gaps and Best Known Methods (BKMs).
• Evaluate the quality of data collected, drawing conclusions based on this data and initiating follow-up action items.
• Present and discuss in depth all projects with respective key stakeholders.
• Demonstrate good project management, presentation, organizational, leadership, and communication skills.
• Demonstrate being a "Team builder" with strong focus on effective team dynamics and distributed responsibilities.
• Develop eventual reports, identifying their strengths and weaknesses and creating an action plans to work on the areas each individual needs to improve on.
• Manage roll-out goals to eventual reports, assigning goals that both meet the company objectives and areas of focus and the employee development.
• Write annual performance plans, describing employee expectations and performance and providing feedback and follow up as needed.

Leading and managing the Automation and quality system setup in Frontend Quality Network. In charge of QSEAL related activities and address the stakeholders' needs with the respective Frontend Site Directors

Additional Job Description

Develops, implements, and maintains technical quality assurance and control systems and activities. Defines and specifies the implementation of standards, methods, and procedures for inspecting, testing, and evaluating the precision, accuracy, and reliability of company products. Participates in the reviewing of engineering designs to contribute quality requirements and considerations. Assists product support areas in gathering and analyzing data. Selects, develops, and evaluates personnel to ensure the efficient operation of the function.

Job Description & Requirements

1. Co‐ordinate and supervise site workers and subcontractors.

2. Keep track of the site schedule to ensure works are on time.

3. Able to interpret drawings and Calculation of Site Materials

4. Liaise with QS to monitor work schedule and claim or VOs.

5. Report to Construction Manager on site matters and progress of work.

6. Attend to Site Meetings.

7. Compliance to safe work procedures and maintain good house‐keeping.

Job Description:

1. Carry out testing and commissioning related to marine propulsion systems, power generation systems (Marine and Land), deck machinery, etc.

2. Able to perform hands-on fault diagnosis, troubleshooting, and maintenance of marine systems/components in workshops and on-board vessels.

3. Must be willing to perform hands-on work in mechanical repairs, installation, and removals.

4. Able to read and understand engineering drawings (Electrical and pneumatic).

5. Provide support to the project team on the implementation of new projects.

6. Provide technical support to customers.

Job Requirement:

1. Min Higher Nitec, Diploma or Degree (Major in Power)

2. Experience in electrical control systems preferred.

3. Specialized in Electrical.

4. Must be energetic and enthusiastic.

5. Proficient in Microsoft Office (Word, Excel, PowerPoint.

6. Able to work independently and also in a team (with multi-disciplined engineering personnel).

7. Able to travel (Anchorage/Local/Overseas) on short notice and at odd hours.

8. Able to work outdoors and on board.

• Exposure in memory testing platform is requirement
• Hands-on experience with bench (memory debug station) or volume NAND testers is a requirement
• Passion in memory cell, periphery and defectivity failure modes, characterization, and modeling
• Solid knowledge in device physics and circuits. Knowledge in CMOS/NAND cell reliability physics is a plus
• Fundamental experience with statistical analysis and knowledge of reliability statistics
• Experience with automating data analytics and scripting. Machine-learning knowledge an added benefit
• Ability to drive projects and structural problem-solving independently
• Excellent teamwork, communication, and curiosity about new solutions
• Understanding of the 3D NAND Fab Processes, Flow and Fail modes
• Understanding of electrical specifications, Probe and Param registers
• Understanding of Reliability items for CMOS and Array
• Familiar with Backend test flow and major failure modes
• Strong facilitation skills with ability to clearly communicate complex topics
• Real passion for improving product quality to increase customer satisfaction
• Multi-tasking and analytical skills
• Confirmed ability to deliver and communicate data and findings.
• Independently motivated with strong drive to deliver results

Additional Job Description

Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products. Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations. Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions when necessary. Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed. May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations. Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.