Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Duties & Responsibilities:

• Oversee and guide the Quality team to ensure effective quality control across the entire warehouse department.
• Collaborate with the Warehouse Manager to review and refine work instructions, ensuring clear and efficient operational procedures.
• Plan and conduct education and training programs to enhance the skills and knowledge of warehouse staff.
• Identify challenges in warehouse operations, analyze root causes, and implement solutions to improve quality and organizational efficiency.
• Develop and implement Kaizen (continuous improvement) strategies to enhance processes within the warehouse department.
• Plan and execute Internal Quality Assurance activities across all warehouses to maintain high-quality standards.
• Support the warehouse department in meeting and exceeding customer quality expectations.
• Manage the tasks and attendance of Quality team members, ensuring efficient and productive operations.
• Foster collaboration with managers and staff across Sankyu and other warehouses to optimize organizational performance.

Requirements:

• Diploma / Degree in Engineering and QMS related field with min 2 years of relevant experience
• Team player, good interpersonal and communication skills, able to work independently
• Good knowledge in ISO related management systems
• Candidate must possess at least Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Bioengineering/Biomedical), Engineering (Environmental/Health/Safety), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical), Logistic/Transportation or equivalent.
• Working location: Tuas (**Shuttle service is provided from/to Tuas West Road MRT**)

Overview:

As a Quality Control Assistant, you will support the implementation and compliance of ISO standards within the company. Your responsibilities include assisting in maintaining documentation, supporting internal audits, and helping with quality checks to ensure compliance with established standards. The ideal candidate should have a keen eye for detail, good communication skills, and a proactive approach to continuous improvement.

Responsibilities include:

• Perform goods receiving in the central kitchen and report any non-conformities

• Ensure various departments in central kitchen adhere to ISO22000 food safety management system, Good Manufacturing Practices (GMP) and company standard operating procedures at all times

• Perform quality checks in production lines and ensure accuracy of Critical Control Points (CCP) and Operational Prerequisite Programmes (OPRP) records

• Prepare and send daily quality control reports to the management

• Assist to prepare training content and conduct in-house staff training covering personal hygiene, food safety guidelines and workplace safety

• Perform in-house swab tests on equipment and personal hygiene, equipment validation and verification and oversee all pest control maintenance

• Assist with routine and ad-hoc ISO internal and external audits, halal audits and regulatory agencies audits

Minimum qualifications

• Diploma or Bachelor’s degree in Food Science, Food Technology, Culinary Science, Quality Assurance or related field

• Have basic knowledge in FSMS, HACCP, QMS and Halal Certification

Requirements

• Preferably 1 year working experience in QA or related field in F&B industry

• Good communication and interpersonal skills

• Good team player

• Able to work within deadlines and well-organised

• Positive attitude and eager to learn

• Display strong initiative and able to work independently

• Thrive in a fast-paced environment and able to adapt quickly

Maintain standards and quality processes in food manufacturing operations;

• Conduct daily in-process quality control inspections at production lines to ensure alignment with internal requirements and Good Manufacturing Practices
• Maintain integrity, accuracy and completeness of QC data and records
• Perform routine calibration and maintenance of equipment
• Assist in export documentation consolidation and Health Certificate application
• Assist in monitoring and inspecting company infrastructure, equipment and utilities
• Develop and implement quality control procedures and protocols to improve overall product quality and consistency.
• Inspect in-coming and out-going products according to receiving and shipping policy
• Review and validate supplier raw material records and results (COA)
• Process improvements initiatives across the company

Conduct tests for food quality and packaging;

• Sensory evaluation of products aligned with specification
• Perform product sampling for laboratory tests

Rectify non-compliance issues (Customer Complaints / Audit findings);

• Support traceability investigations into lapses in quality, hygiene standards and non-compliance to quality standards. Conduct investigation and follow up with corrective action

Conduct training for production staff on quality control procedures, GMP practices, and food safety protocols;

Job Requirements

• Minimum 1 year of relevant working experience / Diploma in Food Science or related field.
• Knowledge of food safety standards and GMP principle
• Proactive, willing to learn and good follow-up skills
• Able to work independently with minimal supervision

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

We are the makers of possible

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.

Why Join Us?

A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.

To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.

Become a maker of possible with us!

Job Summary

Plan, co-ordinate and oversee all QA support activities and initiatives in the work cell. To improve process capabilities and product quality to meet the desired targets.

Job Description

• Oversee the product quality from assembly to packaging process and ensure full compliance to the Quality System and regulation requirements.
• Champion data-driven decisions to resolve non-conformances, complaint investigation, CAPA, deviation and other quality matters in a timely manner.
• Interfaces with R&D, unit quality, customer quality engineer to formulate plans and actions to meet product specifications and quality requirements
• Drive quality improvement/automation projects through project planning, scheduling inspection/testing activities, performing analysis and publishing reports.
• Perform test method validation, installation qualification, correlation study for new quality equipment/test method.
• Act as a support role for regulatory, external, internal and/or supplier audits and lead the value stream members to execute the corrective actions for compliance with customer specifications.
• Perform data analysis and trending for product quality performance through monthly and quarterly management review meeting.
• Establish and maintain effective system and procedures to ensure that all manufacturing and engineering documentation are controlled and updated per established regulatory requirements.
• Supervise quality technical specialist and a group of technicians on quality tests and checks.
• Safety & ISO 14001 Environmental accountability: Ensure a safe, healthy and environmentally-friendly workplace by observing Company's rules and procedures. Active involvement in prevention, elimination of potential safety hazards and participation in activities which promotes recycling, replacement and reduction of resource materials.
• Perform any other tasks as assigned.

Preferred Requirements

• Minimum 3 to 5 years relevant working experiences in a quality engineer role.
• Demonstrated good understanding of key elements of Quality Management system, CFR Part 820, ISO 13485.
• Have prior experience in managing quality improvement projects would be an added advantage
• Able to effectively multi-task and work independently with a high level of initiative

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Primary Work Location

SGP Tuas - Tuas Plant

The Company

At IRVINS, you'll join Singapore's high growth homegrown consumer food brand expanding quickly on the global stage, with 5 offices and 19 markets worldwide, and a product lineup that redefines the food industry.

Founded in 2008, over the years we have pivoted and evolved from an F&B restaurant into a modern food CPG startup. With IRVINS’ global reach, category and market leadership, and startup mentality, we welcome people with a builder attitude keen on building things from scratch and help turn a homegrown brand into Singapore’s iconic global consumer brand.

The Operations Quality Specialist is responsible for ensuring the quality and safety of products in a food manufacturing environment. This role involves monitoring production processes, conducting quality checks, enforcing compliance with regulatory and internal standards, and driving continuous improvement initiatives to enhance product quality and operational efficiency.

Responsibilities:

Quality Assurance & Control:

• Perform routine quality inspections and audits across all stages of the production process, including raw materials, in-process, and finished products.
• Monitor adherence to Good Manufacturing Practices (GMP), Standard Operating Procedures (SOPs), and food safety protocols.
• Review the tests method and analysis using established quality control methods, ensuring products meet defined specifications and standards.
• Responsible for the Batch record review and perform the release of the product. Work closely with production and supply chain team to ensure the market demand is fulfilled.
• Document and report non-conformities and collaborate with relevant teams to implement corrective and preventive actions.
• Support the new product initiative with different stakeholders, ensure the quality of the product is compliance to the product specification
• Managing the equipment calibration used in QC & Production, to ensure the calibration is up to date and maintained.
• Review and manage the GMP audit, to ensure the GMP requirement is maintained and at audit ready status.

Regulatory Compliance:

• Ensure compliance with GFSI standard and regulations (e.g. BRCGS, FDA, HACCP) and company policies.
• Assist in preparing for and participating in regulatory and third-party audits.
• Maintain accurate and up-to-date records for traceability and regulatory purposes.

Process Improvement:

• Identify areas for quality improvement and work closely with production teams to enhance processes.
• Participate in root cause analyses and contribute to continuous improvement initiatives.
• Develop and deliver training sessions for staff on quality standards and food safety practices.

Collaboration & Communication:

• Serve as a liaison between the Quality Assurance and Operations teams to ensure seamless communication and alignment on quality objectives.
• Provide feedback and recommendations to production staff and management on quality-related issues.
• Support new product development and changes in production by evaluating potential quality impacts.

Job Title: Production Quality Engineer (SLT Department)

This Production Quality Engineer role is in-charge of the daily operation inspection & assurance of the defined processes and procedures. Working environment inside a Semiconductor 100K cleanroom, System Level Testing Operation. Work with Production Quality Manager & Operation HOD to develop and implement quality standards and processes to meet customer and company requirements. Conduct daily tests to evaluate the accuracy and precision of products and production equipment. Prepare reports by analyzing, collecting, and summarizing data. Manage customer-specific requirements and offer technical support. Supervise daily workplace safety and quality practices. Teamwork with Production Engineers & Supervisors to ensure high quality standards for Operation.

Responsibilities:

• Production Quality daily inspection system ownership and assurance of processes pertaining to 100K clean room System Level Testing operation.
• Mange and deploy daily Production IQC & OQC operators/inspectors.
• Attend daily operation meeting, and present the Production Quality KPI.
• Report to Production Quality Manager on quality issues and provide updates/resolution.
• Ensure products meet quality standards and resolve quality issues with operation.
• Drive continuous improvement of quality standards and processes with operation.
• Evaluate skill levels of new QA inspectors, develop training materials, coach and train team members for improving team performance.
• Provide quality assistance in buyoff, installation and maintenance of company equipment.
• Document quality procedures and processes.
• Ensure compliance with ISO standards and support audit functions.
• Ensure safety requirement is strictly followed and all vendors must meet our safety expectation before commencement of work.
• Provide urgent/ad-hoc support for quality topics, even during off-office hours, so as to achieve continuous running of the operation.
• Develop cost-reduction initiatives while still maintaining high quality and productivity.
• Provide job assistance and conduct job trainings for employees as needed.
• Any additional tasks as assigned by the manager or management.

Requirements:

• Minimum Degree in Engineering or equivalent
• At least 3-5 years’ experience in managing high quality standards of Semiconductor 100K Cleanroom Testing operation.
• Able to demonstrate good communication, organizational, analytical and interpersonal skills
• Experience in implementing continuous improvement projects (Lean/Kaizen) and demonstrate resource planning capability.
• Experienced Production In-Process Quality Engineer who is highly effective working in a team-oriented matrix organization.
• Must have proven skills effective problem solving, troubleshooting and root cause failure analysis, on Production Quality management.
• Certification in Quality Standards is a plus point.

PM Singapore is currently looking to expand the CQV capabilities. This role will be supporting one of our many clients in the field of commissioning, qualification and validation work within the Life Sciences space.

Your day to day role would involve the following activities:

• Planning, Performance, and Coordination of Computer System Validation, Equipment Qualification, Temperature Controlled Objects (Freezers, Incubator etc), Clean Utilities Validation and cleaning validation in accordance with internal procedures and industry standards.
• The qualification includes, FAT, SAT, IQ, OQ, PQ of any additional modifications of existing manufacturing process equipment, package units (e.g. Ultrafiltration Unit, Chromatography Columns, autoclave, FIT testers), commercial off the shelves (COTS) analytical instruments, freezers,
• Create, review and approve equipment qualification and analytical instruments lifecycle documentations, e.g. FAT, SAT, IQ, OQ, PQ protocols and reports, risk assessments, technical specifications.
• Can lead investigation revolving around discrepancies identified during qualification activities.

We would like to hear from candidates who have:

• Relevant experience in validation activities (including the creation, pre-execution approval, execution, post-execution review, and post-execution approval of all validation lifecycle documents)
• Leading daily validation meetings with cross functional teams in resolving validation issues.
• Experience in equipment qualification including analytical instrumentation and manufacturing equipment.
• Work experience in Pharmaceutical or BioPharma industries
• Hands on validation execution experience
• Able to execute activities in cGMP environment, including cleanrooms or technical areas.

This position reports to Head, Quality Service.

We are looking for an energetic, and self-driven individual who could think out of the box and make a difference in the company by implementing and seeing through improvements to processes, products, platform and people. You will be part of the Quality Service Team that is committed to improving customer experience and improving quality within the company.

You will be handling and providing strong support to the process of achieving fair resolution for escalated complaints with the achievement of business process improvement and customer satisfaction. The team works closely with various departments and stakeholders to gather relevant information, analyse complaints, and provide appropriate solutions or remedies to customer.

You will be raising our service standards and competency within the company through developing training and establishing standards as well as launching company-wide service initiatives like EXSA and Servicing workshops.

In addition, you will also be exposed to brainstorm and improve our Wealth funnel for P3 Mobile App. The executive will see himself/herself becoming more confident in handling challenging situations and improved interpersonal skill set, negotiation skill as well as better judgement in assessing and handling future challenges he/she may have.

Specific Responsibilities:

Executive to be involved in:

1. Conduct thorough and comprehensive complaint investigations, ensuring adherence to regulatory guidelines and internal policies.
2. Collaborate with cross-functional teams, including front office, products, legal, compliance, and subject matter experts, to gather necessary information and insights.
3. Provide guidance and support to team members in resolving complex complaints and ensuring timely resolution.
4. Prepare accurate and detailed reports on complaint investigations, including findings, recommendations, and actions taken.
5. Foster a culture of continuous improvement, promoting a customer-centric approach within the company.
6. Maintain a high level of professionalism and confidentiality in handling sensitive customer complaints.
7. Perform ad-hoc tasks (e.g. tasks, projects, service initiatives).

Technical Skills and Competencies required:

• Diploma holders and above from a reputable institution.
• Minimum 3 years of experience in Complaint Handling or Customer Experience, preferably in the Banking and/or Securities industry. Experienced candidate with at least 5 years of experience will be considered for a managerial role.
• Excellent interpersonal and communication skills. Both written and verbal, with the ability to effectively communicate complex information to stakeholders at all levels.
• Proficiency in English and Mandarin to liaise with Chinese-speaking stakeholders.
• Prior working experience in financial industry, preferably in handling securities and investment products or relevant accreditations (e.g. CMFAS, etc) will be an advantage.

Your Role

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• To participate, work closely and give support to safety personnel at site on all initiatives/ matters relating to Safety and Health
• To comply with the Company Safety Management System and the WSHA and its subsidiary legislation

The Requirements

• Possess a Degree in Civil Engineering or its equivalent
• Minimum 3-5 years of relevant working experience in construction industry
• Must be technically inclined and possesses excellent problem-solving
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and construction teams

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24110

• We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.
• In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes

What will you do?

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.
• Strong analytical and problem-solving abilities.
• Excellent communication skills, both verbal and written.
• Ability to work collaboratively in a fast-paced, agile environment.
• Leadership qualities with the ability to mentor and guide team members.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

• We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.
• In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes

What will you do?

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.
• Strong analytical and problem-solving abilities.
• Excellent communication skills, both verbal and written.
• Ability to work collaboratively in a fast-paced, agile environment.
• Leadership qualities with the ability to mentor and guide team members.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Quality Technician (Jurong Island)

Responsibilities

• Support production shift team with sample testing
• Cleaning and preparation of sampling apparatus, Ampule, gel bottles and other laboratory glassware.
• Prepare reagent and standard sample for analytical equipment.
• Report abnormalities and support troubleshooting of equipment.
• Review and revise for QC process flow, control plan and SOP of analytical such as non-prime product, process problems and complain.
• Investigate root cause and take corrective action plan.
• Planning for analytical process modification and analytical process change.

Requirements

• Min NITEC or Diploma in Chemical Engineering field or other relevant certificates
• Possess Analytical knowledge and Skills such as gas chromatography, gel permeation chromatography, Fourier infrared analysis, gel analysis, Karl Fischer’s method and titration method) are preferred
• Highly motivated, a team player, with the ability to multitask and project management skills
• Understand quality policy and basic rule.

Interested applicants please submit your resume to [email protected]

Join Us at the upcoming ✨MCI Career Fair✨ on 29 November, 10am – 4pm at Kampung Admiralty‼ Discover