Job Responsibilities:

• Implement QA plan, review, and revision for company level.

• Report on quality related matters to the QA/QC Manager and/or immediate superior, including preparation of monthly summary To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support To develop and manage the quality control and quality assurance procedures and ensure compliance.

• To prepare Inspection and Test Plan (ITP) and Inspection Reports Maintain the ISO and related certifications for company level.

• To perform needed tests on site to ensure works are done according to the contract specifications. Preparation of document submissions for client approval.

• Attend meetings and liaise with the client to ensure that quality requirements are being followed at all times.

• Maintain document record master list pertaining to equipment and monitor on the calibration status. Coordinate and make arrangements for equipment calibration when due.

• Compile and receive relevant material certificates and other required certificates and test report from vendors/suppliers. Coordinate with relevant testing laboratories for testing and witnessing.

• Compile and maintain quality records e.g. Request for Inspection (RFI) and verify as necessary. Coordinate on-site quality assurance and control activities.

• To conduct independent Quality Assurance check on and off site.

• Report non-conformities to the QA/QC Manager and/or Project Manager, perform analysis, identify root cause and propose corrective actions.

• Maintain and control QA/QC practices on daily basis with regular checks and inspections ensuring correct operation and implementation of procedures.

• Advise and assist the project team members on QA/QC matters. Assist in the development of internal QA/QC checklists.

• Implement and enforce Quality Control Plan.

• Verification and checks on raw/incoming materials and/or FG. Documents for non-conforming works and corrective action.

• Identify and assess any foreseeable risk arising from workplace or work processes, minimize environmental impact associated with the manufacturing / assembly activities.

• Perform other duties as and when assigned/instructed by immediate superior or higher management.

Job Requirements:

• Minimum Qualification: Diploma in Mechanical/Electrical or Marine Engineering Discipline Minimum 1-2 years of experience in Marine, Oil & Gas Industry

• Welding Certificate

• Good understanding of Marine/Offshore industry practices and standards.

• Know-how in one or more of these areas GD&T, NDT, welding, steel fabrication, material casting, and machining technology will be preferred.

• Familiar with ISO 9001 requirements & different marine classification societies' standards and requirements will be an added good knowledge of QMS and ability to implement, conduct checks and audit and upkeeping of documents etc.

• Project Management Skills

• A team player with good interpersonal and communication skills, attention to details, meticulous and independent. Good organizational, multitasking, prioritization, and effective time management skills.

• Ability to think critically and resolve problems/issues. Positive attitude, proactive and self-initiated.

• Ability to multi-task in a fast paced and dynamic environment

• Job Benefits

• · Positive and closely knitted working environment

• · Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• · Annual leaves starting with 14 days and up to 21 days

Working Location:

15 Kwong Min Road S(628718)

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

· Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

· Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.

· Interacting with clients, interpreting their needs and requirements, and representing them in the field.

· Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

· Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

· Reviewing the engineering tasks and initiating the necessary corrective actions.

· Developing specifications for the project's needed equipment.

· Creating frameworks to measure the project's metrics and data collection.

· Establishing field test methods and methods for monitoring the quality of those tests.

· Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

· A Bachelor's degree in engineering or a related field.

· 3 or more years' field and project planning experience.

· Excellent computer literacy and knowledge of design and visualization software.

· The ability to work with multiple discipline projects.

· Excellent project management and supervision skills.

· Excellent organizational, time management, leadership, and decision-making skills.

· Strong written and verbal communication skills.

· Knowledge of applicable codes, policies, standards, and best practices.

Job Description

· To design, develop and implement PLC, HMI, and/or SCADA Application and it's related system, according to technical specification and design practices.

· To prepare technical documentation, wiring diagram, testing procedure

· To conduct field testing & commissioning, where occasional work during engineering hour (night time).

· To provide troubleshooting of control systems on ad-hoc basis.

Job requirements

· Relevant certificate, with at least diploma in any electrical, electronic, mechatronics or equivalent.

· With experience in programming Siemens, Schneider or Allen Bradley PLC, HMI or SCADA.

· Hardware configuration and software coding skills.

· Strong problem-solving and analytical skills

· Customer oriented.

· Good inter-personal communication skills.

· Self motivated with good initiative

RESPONSIBILITIES:

• To advise management on relevant Acts & Legislation pertaining to environmental and health
• Monitor to air, water (ECM) noise pollution, waste management and vector control issues
• Liaise with license pest operator or agent
• To monitor noise readings and advise management accordingly
• To conduct regular site inspection, particularly on ECM, perimeter drainage system, silt facilities, poor housekeeping that will encourage pest breeding, workers living and cooking condition, sanitary facilities etc.
• Together with health supervisor to discuss findings & recommend measures to the occupier to correct non-compliances and verification of action taken
• Prepare fortnightly report to management on Environmental control
• To act according to what is stipulated in the company’s environmental programme, conduct review and make recommendation for improvements
• Conduct investigation on industrial diseases, pest infested area and implement measure to stop its spread & prevent recurrence
• To liaise with relevant authorities on environmental & health issues
• Implementation of departmental procedures to comply with ISO 9001; 14001; OHSAS 18001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Any other related duties assigned by superior from time to time

Requirement:

• Must be registered with NEA

Purpose:

Responsible for performing the final inspection of assembly products to meet Customer's quality standards.

Key Area of Responsibilities:

· Perform In-process and Final Inspection for assembly tools and loose assembly modules to meet the requirement as defined on drawing, WI and any related documents.

· Initiate Material Review Board (MRB) review when part or assembly is not according to requirement as defined on drawing, WI and any related documents during in-process inspection.

· Update outgoing inspection record after Final Inspection to allow monitoring of the internal quality.

· Raise Non-Conformance Report (NCR) for non-conformance found to ensure reject is recorded.

· Support and participate in company continuous improvement program.

Qualification & Experiences:

· Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course

· Preferably with Workplace safety & health in Metal work certification

· Knowledge on quality inspection and buyoff

· No experience are welcome

OB DESCRIPTION

Job Title

Quality & HSE Engineer

Occupation

QUALITY CONTROL ENGINEER

Job Description & Requirements

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

Key Responsibilities:

1. Participate on problem solving teams as related to compounding and secondary processing

2. Subject Matter Expert in operation of equipment (single screw extrusion, twin screw extrusion, batch mixing using double arm mixer, batch mixing using planetary mixer)

3. Responsible for continuous process improvement that combines quality and efficiency

4. Participate in scale up from laboratory to production for new formulations and processes

5. Research and implement new compounding and secondary processes as needed

6. Responsible for training others as related to manufacturing processes

7. Create and maintain preventative maintenance plan for all equipment

8. Participate with installation of new equipment

9. Other tasks assigned by superior

Requirements:

1. Bachelor or above in Polymer Engineering or related degree

2. More than 10 years process experience in polymer mixing/reaction industry, at least 5 years in twin-screw process process

3. Familiar with twin-screw and batch mixing equipment and project management

4. Good work ethic

5. Good problem solving skills

6. Works independently and efficiently

7. Good written and oral communication skills

8. Ability to work in cross function teams efficiently

9. LEAN manufacturing knowledge

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

Geotechnical:

- Experienced in the design of earth retaining and stabilizing structures, deep foundations, reclamations, slope stabilities.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Responsibilities

· Assist Project Manager in project management, survey, managing site works, construction activities, monitor work schedules, update progress, planning and implementation in accordance to master work plan and scope of work within project budget.

· Provide guidance and supervision to contractors/ in-­house workers in relation to Electrical/ Structured cabling works in accordance to proposal for site build for cabling infrastructure, installation quality, and adherence to site work safety requirements and to resolve technical issues.

· Prepare project submissions, tenders, system designs, installation drawing & coordination of all technical activities on assigned projects

· Participate in project meetings and resolving project issues

Requirements

• Candidates should possess at least a Nitec/Diploma in Electrical/ Engineering or its equivalent.

• At least 1-­3 years Project Management and hands on working experience in Electrical and/or Structured Cabling.

• Able to read/write and speak English is a must.

• Able to work independently and/or work together in a team when needed.

• Able to multi­task

• Have a strong sense of leadership, customer oriented and problem solving skills

· Proficient in Microsoft Office

- Working Mon to Alt Sat from 8.30am to 5.30pm

Responsibilities:

• Assist Piping Lead Engineer and execute the tasks assigned by Lead Engineer with no or minimum supervision.
• Lead a group of piping engineers and designers to execute the tasks assigned by Lead Engineer or/and monitor the work executed by engineering design house where applicable.
• Review and monitor engineering design progress related to piping work scopes.
• Prepare and raise technical query (TQF) and engineering variation order (EVO) related to piping for additional work scopes.
• Align the piping design output (such as piping isometric drawing, pipe spool drawing, etc) with construction team to ensure all the information required by construction teams are incorporated.
• Understand department and project specific design workflow.
• Understand Contract Specification and project requirement summary.
• Understand Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and piping routine requirements.
• Understand equipment layout plan (include escape route, maintenance space, mechanical handling, other equipment).
• Understand non-piping design related requirements such as fabrication, erection, painting, QA/QC, testing and commissioning.
• Responsible for ensuring that all works meet scope and technical quality of the project and comply with project requirements.
• Monitor P&ID revisions and ensure the compliance between piping 3D model with latest P&ID.
• Monitor design input need date and data required to execute the piping design works.
• Monitor 3D model clash and design review comments / punch lists.
• Monitor the comments from Client and Classification Society.
• Monitor all the piping related interface points.
• Monitor all the hotwork, tank’s coating and drydocking related activities where applicable.
• Monitor piping procurement status and surplus material due to drawing revision.
• Monitor all the hold items that affecting piping design completeness.
• Monitor and control the development of piping weight.
• Ensure proper communication and workflow are well established between piping stress team with pipe routine and pipe support designer team. Closely monitor the compliance between piping 3D model with the latest pipe stress analysis report.
• Review/comments piping arrangement, isometric and pipe supports drawings from piping designers.
• Review/comments on piping calculations carry out by other piping engineers/ subcontractors (e.g. pipe stress analysis report, flow master report, surge analysis report).
• Review/comments technical proposal from vendor.
• Review/comments vendor certified Document (VCD).
• Monitor and control drawing revisions especially when construction already started.
• Ensure proper communication and workflow are well established between piping designing team with construction team. Monitor the compliance between piping construction drawing (piping isometric and pipe support drawing) with the latest 3D model.
• Monitor the piping design database completeness (such as 3D model attributes, etc) to meet the project Digital Engineering requirements.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Onboard vessel to carry out inspection at site.
• Provide support to piping construction, QA/QC and other non-engineering design related activities such as inspection, coating, painting, welding, test packages, etc.

Requirements:

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Min. Bachelor Degree in Mechanical Engineering.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.
• Good knowledge in Piping Design.
• Good knowledge in International Standards related to Piping such as ASME, ASTM, API and Classification Society Rules and Regulations.
• Good skill in Excel is preferred.
• Experience in using AutoCAD, Naviswork, Smart Plant, Aveva, Cadmatic, etc. is preferred.

Overview:

To lead a team of personnel (Yard and contractors) on the efficient operation of activities carried out onboard vessel (offshore newbuilding, repair, conversion and modification) or workshop and ensure that works are completed within stipulated schedules with skill, efficiency, quality and innovative solutions. Operation activities include practical design, practice procurement, project management, construction, installation, testing and commissioning. Lead the Safe Distance Officer for Covid-19 or similar where applicable.

Responsibilities:

• Administers, monitors and continuously ensures that all operations conform to safety requirements and maintains high safety standards.
• Based on defect list given by ship owner, plans, prioritises and executes repair activity based on available resources and facilities. Provide information to APM for any CM39 requisition
• Co-ordinates and disseminates all the repair activities in the repair process in a given schedule with supervisors, yardmen and contractors in accordance to the Department Work Instruction and specifications.
• Attends vessel safety co-ordination meetings to ensure that all repair activities are carried out in a safe environment and meets the applicable statutory, regulatory and contractual requirements.
• Attends department production meeting to co-ordinate work progress, update work schedules promptly and scope of work. Highlight critical path and also channel to Ship Repair manager to achieve project milestones and prevent cost overruns.
• Liases with Shiprepair Manager/ Billing Dept about variation and additional in work scope. Raise variation order for additional work not stated in the specs
• Liaises and coordination with relevant trades towards milestone set
• Liaises with Superintendent for critical activities for smooth operation and provide technical proposal.
• Ensure cost control by correct Just In Time material ordering, proper manpower deployment and reporting, rework prevention, continual improvement on work method in order to meet the EVA, KPI and Key Thrust set by the department
• Feedback to HOD and superior on any non-conformance and record in Incident reporting and follow up on corrective actions
• Ensure all completed works carried out are documented and verified by Client
• Contractors work completion report verified as per actual carried out
• Ensure proper usage of department assets and report any non-conformance
• Whenever required communicate through by means of IT networking and solutions
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations and HSE operating procedures and conduct Risk assessments before commence of work. Counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures and Audit Matters e.g. ISO9001:2015, ISO45001:2018 and ISO14001:2015.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed. Perform Safe Management/ Distancing Officer duties stipulated when assigned
• Any other associated tasks and responsibilities assigned from time to time.

Preferred Requirements:

• Preferably with 2 years’ working experience in a similar capacity.
• Effective planning skills, good supervisory ability, conflict management skills and interpersonal skills.
• Effective problem solving and decision making skills are also essential.
• Ability to communicate in other languages (like Mandarin, Tamil, and Malay) would be an added advantage.
• Basic knowledge on Piping Standard and Compliance with all Codes, Policies, Procedures e.g. ASME Code for Pressure Piping B31.3, ASME IX, IACS
• Resourceful, dynamic, excellent leadership qualities, tactful, committed, good team player, customer oriented and able to work under stressful situations.

Preferred Qualifications:

• Minimum primary education with relevant working experience or diploma in Marine Engineering or Mechanical Engineering or NTC 3 certification or equivalent or completed apprenticeship in Marine Piping and Plumbing.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Create, review, administer and update (monitor & track) construction schedule for project
• Collaborate with other disciplines to collate/provide scheduling data — subcontract change requests, bid comparisons, new work item estimates and resolution of potential schedule/work problems
• Interface and work closely with project team and sub-contractors to ensure required progress
• Liaise with managers and engineers to discuss the progress of the project and address any issues that may arise
• Liaise with external contractors and suppliers to organize the phases of the construction development and scheduling
• Prepare cost estimations and detailed man-hour calculations
• Monitor and track/record work delay/progress and prepare scheduling reports
• Analyze gaps between the planned and actual progress and highlight the areas of concern to project management
• Prepare Project site daily, weekly, and monthly reports and project schedules
• Prepare cost estimation for any additional works and variation order
• Prepare Project site minutes of meeting (MOM) for the current progress meeting and other site meetings
• Any other duties to be assigned from time to time

Pre-requisites:

• Diploma/ Degree in Mechanical Engineering
• Minimum 3 years of experience in a similar role for power plant / industrial plant projects
• Proficient in Primavera P6 and/or MS project
• Candidates with experience in power plant projects will have an added advantage
• Independent and able to communicate effectively at all levels with other disciplines
• Good time management and planning
• Good organizational skills and methodological approach
• Strong attention to details
• Willing to work under pressure and in construction site conditions

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned

Requirement:

• Bachelor’s Degree in Civil Engineering or equivalent
• Able to lead and work independently
• Proficient in Microsoft Office and AutoCAD
• Good communication skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Highlights:

Immediate hiring

Accessible via public transportation

We provide opportunities for career advancement within the company

Benefits:

Working Hours: 8 am-6 pm (6 days)

14 days Annual Leave after confirmation

14 days Medical Leave (completion of 3 months service)

$200 medical claim per year

Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Sales Engineer, Engineering Service & Solutions

Reporting to the Sales Manager, you will be responsible for developing new business opportunities. You are required to generate and develop sales lead leading to creating a customer base. This will include increasing sales revenue and maintaining good relationships with existing customers, gathering and monitoring market information and preparing sale plan to meet targets.

Requirements:

· Degree or Diploma in Electrical Engineering

· Relevant sales experience will be an advantage

· Must be customer oriented and a team player

· Able to work independently and self-motivated

· Must be goal driven and target achievement oriented

· Able to carry out presentations

· Must own a car

· Able to travel when required

Scope of the role

Electrical Engineers apply their skills and expertise to generate solutions that require development or sustainment of new or improved techniques, procedures, or products. Your success includes assisting with planning, conducting, and evaluating approaches to meet project objectives in a timely, cost-effective fashion.

Job Responsibilities

• Analyze, design, develop, and maintain products; assist in commercialization.
• Assist in identifying and organizing requirements. Apply usability procedures and principles at project or product-line level or through customer input.
• Build prototypes, products, and systems for testing; set up and run laboratory simulations.
• Design testing procedures and coordinate testing. Conduct tests, document results, and develop client presentation.
• Conduct and/or participate in technical reviews of requirements, specifications, designs, codes, and other artifacts.
• Evaluate engineering approaches and risks to produce and iterate development plans.
• Train and support clients and field representatives.
• Identify and keep abreast of novel technical concepts and markets.
• Contribute to design standards and support design reuse.
• Author technical reports, papers, articles, presentations, and patents.

Job Requirements

• Master’s, or bachelor’s degree in electrical or electronic engineering
• Excellent verbal and written communication skills in English
• Eagerness to take on challenges and to learn new skills

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

Job Requirements:

• Use AUTOCAD system to draw construction shop drawing
• Provide support on daily operation activities which including office upkeep/maintenance
• Coordinate work arrangement with internal & external stakeholders
• General office support
• Handle sensitive information in confidential manner
• Develop & update administrative systems to make them more efficient
• Documentation and simple processing duties
• Determines project schedule by studying project plan and specifications, calculating time requirements, and sequencing project elements.
• Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems

Job Requirements:

• Knowledge of MS office
• Proactive & able to work
• Able to work in fast paced environment Bachelor’s Degree Engineering (Civil) or equivalent
• Minimum 3 years of Civil Engineering / Structural & AUTOCAD draw experience in related fields
• A proactive and resourceful individual who possess good communication, negotiation and presentation skills
• Good communication and analytical skills, able to interact with people of all levels

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Title: Sales Engineer

Department: Sales

Reports to: Regional Sales Manager

Location: Singapore, Malaysia, Indonesia, Thailand, Vietnam

Job Summary:

The Sales Engineer will be responsible for driving sales, developing business relationships, and providing technical expertise to clients in the fields of interior design, supply and installation, HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting. The ideal candidate will have a strong technical background combined with exceptional sales skills and the ability to work across multiple countries in the Southeast Asian region.

Key Responsibilities:

1. Sales and Business Development:

- Identify and develop new business opportunities within the specified regions.

- Establish and maintain strong relationships with existing and potential clients.

- Conduct market research to understand customer needs, market trends, and competitive landscape.

- Prepare and deliver technical presentations and demonstrations to clients.

2. Technical Expertise:

- Provide clients with technical advice and support on a range of products and services.

- Collaborate with the engineering and product development teams to understand product specifications and capabilities.

- Assist in the customization of products to meet specific client requirements.

3. Project Management:

- Oversee and coordinate the installation and implementation of products and systems.

- Ensure projects are completed on time, within scope, and within budget.

- Liaise with contractors, suppliers, and internal teams to ensure successful project execution.

4. Sales Administration:

- Prepare and present sales proposals, contracts, and agreements.

- Track and report on sales performance and progress against targets.

- Maintain accurate records of customer interactions and transactions in the CRM system.

5. Customer Service:

- Provide post-sales support to ensure customer satisfaction and repeat business.

- Address customer inquiries and resolve issues in a timely and effective manner.

- Gather customer feedback and work with internal teams to improve products and services.

6. Travel:

- Traveling within the designated region to meet clients and manage projects as require.

- Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Qualifications:

- Minimum of 3-5 years of experience in sales engineering or a related technical sales role.

- Sound technical knowledge in one or more of the following areas: HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting.

- Excellent communication, negotiation, and presentation skills.

- Ability to work independently and as part of a team.

- Proficiency in MS Office Suite.

- Ability to travel as require within the region.

Benefits:

- Competitive salary.

- Health and dental insurance.

- Opportunities for professional development and career advancement.

- Travel allowances and reimbursement.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.