• Representing the Quality Management Coordinating with the employer on the matters relating to the quality.
• Arrangement for materials testing according to LTA specification and test plan.
• Coordination for quality of site inspections with all of sub-contractor & QPS team.
• Verifying that the Quality system is implement and maintained at the project site.
• Preparation and submission for Project Quality Plan (PQP) and its subsequent revision.
• Filing and copies of Nonconformity Report, corrective and Preventive Action Reports.
• Ensure all QAQC records are kept and submitted to client in a timely manner as required.
• Preparation and submission of monthly quality report to client- LTA and QPS officially.
• Documents preparation for all of audit related to QA/QC work. Preparation and register of Inspection, arranging of material test as per test plan.

Site work to find out and issue NCN (non conformance notice) to sub-contractor and preparation for reply of NCR to Consultant QPS and LTA teams.

Role

You will be part of a team to provide facilities management services to our client's sites. You will be required to carry out regular inspections to the sites and its facilities to maintain a high service delivery level. You will supervise and manage contractors on the scheduled maintenance of various functions and systems within the sites.

Responsibilities and Tasks

1. Reporting to Operations Executive and/or Operations Manager.
2. Ensure the smooth operation and maintenance of BMS, ACMV equipment (ie. Chillers, pumps, AHU, FCU, etc. are functioning as per scheduled).
3. Maintain/repair plumbing & sanitary systems to avoid water damage and restore full use of water fixtures if required.
4. General maintenance/repair of electrical fixtures and fittings.
5. General maintenance/repair of wall, ceiling and floor finishes.
6. Monitor all work being performed by term contractors, tenant’s service contractors, tenant’s fit-out and reinstatement works.
7. Attend to tenant’s request and feedback.
8. Responsible for alerting the management of any unusual occurrence or damage that have taken place or that may occur (ie. faulty of lifts, building exit route, etc.)
9. Any other duties as assigned by management.

Requirements

1. Minimum 3 years of experience in a office/data center/commercial establishment with sound technical knowledge of building services (M&E).
2. Higher Nitec in Facility Management or Nitec in Built Environment (Mechanical & Electrical Services).
3. Proficient in MS Office.
4. Solid understanding of general maintenance procedures and techniques.
5. Effective problem-solving abilities with good communication skills.
6. Able to perform shift work which includes working on Saturday, Sunday and on Public Holiday.
7. Comfortable to work morning shift (7am to 4pm) when required
8. Support anytime when critical emergency arises (24/7)
9. No overtime but will convert to time in lieu.

Our client is a 3rd party full-service supplier of logistics and engineering solutions. Currently, our client is seeking for Assistant Engineer, Facility to take charge of daily routine facility job and repair work orders.

JOB DIMENSION (SCOPE)

• Supervise daily routine facility jobs and repair work orders as assigned.
• Troubleshoot equipment/facility breakdown and carry out basic repairs.
• Supervise vendors’/service providers’ activities on daily routine facilities and maintenance work to ensure equipment/facility is maintained in full operational status.
• Apply and close work permits with Area/System Owners for vendors/service providers.
• Maintain all site facilities in optimum condition. Ensure all documentation related to maintenance activities are completed accurately and processed to full completion.
• Handling special projects/assignments as assigned by Supervisor / Manager.
• Supervise and train Facility Technicians on facility/maintenance system to enhance their knowledge and skill sets.
• Lead in Root Cause Analysis for equipment/facility breakdowns.
• Implement preventive maintenance programs by reviewing operations and maintenance reports and statistics.
• Inspect and maintain operating equipment/facility and systems with operational standards for facility services.

REQUIREMENT

• Possess min. Diploma in Facilities Management or any engineering principles
• Min. 3 years' relevant experience in facilities management

• Civil & Structural/ Geotechnical design, analysis, and assessment for ground improvement work, foundation, excavation, earth retaining structures, slope, instrumentation, and site investigation.
• Plan, design, supervise, and coordinate for geotechnical/ civil engineering and infrastructural design and site works.
• Ensure all engineering works comply with all relevant statutory standards, regulations, and Codes of Practice.
• Liaison with project stakeholders, clients, other consultants, contractors, relevant authorities.
• Assist Team Leader in maintaining high-quality standards of design and supervision.

Job Requirements

• Bachelor of Engineering major/ interested in Geotechnical & Civil Engineering.
• Minimum 5 years design experience in Geotechnical & Civil engineering projects.
• Those with less than 5 years of design experience can be considered for the junior post.
• Familiar with geotechnical design in Eurocodes.
• Well-versed in civil & structural/ geotechnical design software such as Plaxis, TEDDS...etc.
• Familiar with Authorities' submission requirements for civil/ infrastructure engineering projects.
• Familiar with ground improvement works, civil ad structural designs and BIM will be an advantage.

Email CV to: [email protected]

Job Description

• DevOps engineer is responsible for designing, implementing, and maintaining automated CI/CD pipelines, infrastructure as code, and monitoring solutions to streamline software development processes and ensure system reliability, scalability, and security.

• DevOps engineers who possesses DevOps related certifications from CompTIA, EC Council, RedHat, Cloud certification and knowledge (e.g. GCC, AWS) or equivalent would be advantageous.

• Also, CI/CD, Copado DevOps Implementation and Copado DevOps Platform Experience with SHIP/HAT is preferrable.

Job purpose:

In the ATS Cluster, business experts, engineers (development & operations), chapter leads, and product owners work together as a team. The agile methods support the team members in performing their functions by facilitating a rapid and flexible response to changing conditions and customer needs through an iterative approach and the continual development of new solutions.

The team members organize their own activities, working autonomously and with full accountability. To that end, they are granted responsibility for all processes and systems needed for the products, processes, and services for which they are accountable. Open communications among the team members ensure regular and timely feedback. This enables the team to adopt a "fail fast" approach – i.e. the rapid recognition and correction of mistakes, which permits a quick reaction to changing conditions and customer needs by means of iterative procedures.

The engineer has a technical focus and acts in the capacity of a cell member. Depending on suitability, qualifications, and requirements, he/she may also assume the role of scrum master.

He/she has an agile and digital mindset, and continually adapts it to changing requirements, using the available development opportunities.

The engineer is deployed where his/her knowledge and experience are needed, and therefore demonstrates flexibility regarding assignments to various cells and chapters, even across cluster boundaries.

Within the ATS Cluster you will be responsible for the support of the IB FX, eFX, FX Options and/or Commodities applications. That task comprises the main tasks listed below.

Key activities & main tasks:

MAIN TASKS

• 1st/2nd level support
• incident management
• problem management tasks of Application Operations
• change management tasks of Application Operations
• release management tasks of Application Operations (incl. post release testing)
• vendor management
• documentation
• back-up and recovery managemensafeguarding the stability of the application
• ensuring compliance of the production environment and support processes to the rules & regulations of the bank
• business analysis tasks
• stakeholder management (communication, user training, etc.)
• employee skill development, mentorship, and team planning
• innovation to optimise and improve efficiency of support and applications.
• optimal use of resources to increase efficiency of service.
• performance of special tasks assigned by senior management or business.

Formal education:

• Education: University, Technical College, or comparable professional experience

Specialist knowledge (work experience, further qualification):

Qualifications / Skills

Professional Skills (technical, methodology and business):

ST2

• Proficient in ATS application architecture and infrastructure and underlying technologies, e.g.

o Databases (Sybase/MSSQL & SQL)

o Operating Systems (Windows, Linux/Unix & scripting)

o Network technologies, market data flows and connectivity technologies

o Experience working with monitoring tools like ITRS Geneos, Nagios and/or Tivoli

o Related risk management, reporting and settlement processes

• Proficient in Service Management Processes (ITIL)
• Proficient in IT Security
• Proficient in banking know-how, especially trading related
• Deep understanding of compliance, governance and regulatory requirements in banking IT
• Significant experience working in a trading room environment facing internal/external customers of different seniority levels in support, project management or development
• Fluent in English

ST3

• Expert in ATS application architecture and infrastructure and underlying technologies, e.g.

o Databases (Sybase/MSSQL & SQL)

o Operating Systems (Windows, Linux/Unix & scripting)

o Good understanding of network technologies, market data flows and connectivity technologies

o Experience working with monitoring tools like ITRS Geneos, Nagios and/or Tivoli

o Related risk management, reporting and settlement processes

• Highly proficient in Service Management Processes (ITIL)
• Proficient in IT Security
• Expert banking knowledge, especially trading related
• Deep understanding of compliance, governance, and regulatory requirements in banking IT
• Long experience working in a trading room environment facing internal/external customers of different seniority levels in support, project management or development
• Experienced mentor for junior staff
• Fluent in English

Personal Skills:

• Pronounced analytical thinking
• Good problem solving skills
• Good cooperation capability and understanding of agile methods, incl. use if JIRA
• Strong ability to impact and influence
• Outstanding Service Orientation and customer focussed working style
• Very Good interpersonal and communication skills
• Structured and independent working style, also under pressure
• Strong decision making, persuasiveness and flexibility
• Very good organiser with good documentation skills with experiences in knowledge sharing tools (WIKI, SharePoint, etc.)
• Resilient and able to build partnerships across cultural, regional and organisational borders

Job Description

• DevOps engineer is responsible for designing, implementing, and maintaining automated CI/CD pipelines, infrastructure as code, and monitoring solutions to streamline software development processes and ensure system reliability, scalability, and security.

• DevOps engineers who possesses DevOps related certifications from CompTIA, EC Council, RedHat, Cloud certification and knowledge (e.g. GCC, AWS) or equivalent would be advantageous.

• Also, CI/CD, Copado DevOps Implementation and Copado DevOps Platform Experience with SHIP/HAT is preferrable.

Job Summary:

We are seeking a highly skilled and motivated Infra Engineer to join our dynamic team. As part of the DevOps & Infra team, you will have a comprehensive scope of responsibilities, including managing not only the IT infrastructure but also end-user devices and services. Your role will encompass ensuring the smooth and secure functioning of end-user laptops, managing user administration and access rights, and maintaining the stability and performance of Wi-Fi devices. In collaboration with Development, Operations, and DevOps teams, you will work towards enhancing the availability, scalability, and security of our applications, network, and end-user systems. Your expertise will contribute to maintaining a robust IT environment, optimizing end-user experience, and facilitating efficient release cycles and continuous integration and delivery of software.

Key Responsibilities:

• Administration, maintenance, patch & upgrade of Linux, windows servers and network equipment.
• As an administrator, you will also need to set up new end-users laptops & devices, including troubleshooting and providing assistance on users' IT-related issues.
• Configure and maintain Nginx web servers for load balancing, proxying, and caching to optimise application performance.
• Manage and deploy infrastructure using virtualisation platforms such as VMware, ensuring efficient resource utilisation and scalability.
• Collaborate with development teams to implement and manage micro-services architecture.
• Work closely with the cloud engineering team to design and implement scalable and secure cloud-based solutions using platforms like AWS.
• Enhance and automate monitoring, logging, and alerting systems to proactively identify and resolve performance and security issues.
• Implement and manage network security solutions using firewalls like FortiGate, ensuring data protection and compliance with industry standards.
• Troubleshoot and resolve infrastructure and deployment issues, collaborating with cross-functional teams to minimise downtime and improve system reliability.
• Stay up-to-date with industry trends and best practices in Infra, cloud technologies, and microservices architecture.

Qualifications:

• At least 3 years of experience in IT infrastructure.
• Strong knowledge of Linux with experience and troubleshooting skills.
• Experience in working with end-users.
• Knowledge and experience of AWS services such as EC2, S3, RDS, Terraform and CloudFormation.
• Good scripting skills in Bash, Python or other similar scripting languages, is a plus.
• Familiarity with configuration management tools (e.g., Ansible, Puppet, Chef) is a plus.
• Experience in configuring and managing Nginx web servers and knowledge of load balancing, caching, and proxying concepts.
• Knowledge of network security principles and experience with firewalls like FortiGate and Linux firewalls.
• Strong problem-solving skills and ability to work in a fast-paced, collaborative environment.
• Fluency in both Mandarin and English, with written and verbal communication skills in both languages
• Willing to self-learn & able to work independently.

Education:

• Diploma & above in Information Tech, Engineering, or a related field.
• If you meet the above qualifications and are passionate about joining us, we would love to hear from you. Please apply with your resume and a cover letter explaining why you are the right candidate for this position.

This role provides support to the Asia Pacific region on the Commercial Quality Excellence responsibilities. The role ensures that all the strategic global and regional commercial quality initiatives/projects are successfully rolled-out and progressed in the APAC region. The incumbent in this role also provides operational support to all the markets in the region by working with Director of Global Commercial Quality Assurance.

RESPONSIBILITIES:

· Carries out duties in compliance with established business policies and procedures.

· Demonstrates commitment to the development, implementation, and effectiveness of applicable Quality Processes as per ISO, and other regulatory agencies.

· Responsible for exhibiting professional behavior with both internal/external business associates that reflects positively on the company and is consistent with the company’s policies and practices.

· Responsible for developing, implementing, and maintaining project management activities.

· Participate in strategic projects’ review meetings and manage the project governance in the region.

· Drive implementation of strategic initiatives required for the commercial quality team (annual goal creation and subsequent project rollout, field corrective action communication and rollout, etc.) for the APAC region.

· Manage broad and cross-functional quality projects related to the Commercial Quality.

· Responsible for working with each of the APAC markets to provide operational quality support in consultation with the Director of Global Commercial Quality.

· Support the Audit readiness programs in the APAC region and work closely with the affiliates to support the preparation of key audits and inspections((Corporate Quality Audits, Regulatory Audits, ISO-Notified Bodies)

· Responsible for supporting the APAC affiliates on the Quality and Regulatory requirements; ensuring compliance to Abbott Global Quality/Regulatory Framework, Divisional Policies/ Procedures.

· Responsible for proactively creating Quality Culture by training the Commercial teams.

· Engage as required for the Quality Complaints for Abbott products, ensuring timely investigation, resolution, closure & customer follow-ups through the Legal Manufacturers and Tech Support Team. Proactively reviewing product complaints and address the trends in a timely manner.

· Act as the point of contact/coordination in APAC with other global entities in fulfilling Field Corrective actions (FCA) resulted from Regulatory Field Safety Notifications.

· Supporting Supplier Management Program in the region (Identification, Evaluation through Audits, Monitoring, Maintenance & Re-Qualification).

· Supporting Budgetary Planning for Quality Operations, as needed.

· Support quality remediation programs.

· Continuously drive for compliance with Abbott quality standards and regulatory requirements.

· Other duties as assigned.

BASIC QUALIFICATIONS | EDUCATION:

• Bachelor’s Degree in Pharmacy/Science/Engineering.
• Minimum 3 years of relevant experience in Medical Device/Pharmaceutical /In-Vitro Diagnostics/Healthcare industry with experience in conducting and handling audits and inspections.
• Strong analytical, communication, decision-making and leadership skills for interaction with external and internal customers and partners.
• Strong ability to negotiate with stakeholders.
• Able to manage multiple priorities
• Superior attention to accuracy and details.
• Strong leadership skills, including the ability to set goals and provide constructive feedback respectfully in order to build positive relationships and improve business results.
• Capable of understanding and overcoming different cultural and language barriers to provide solutions that satisfy corporate, regional, and local objectives.
• Strong verbal and written communication skills with the ability to convey appropriate information with clarity and effectiveness.
• Strong knowledge of relevant medical device industry regulations for quality systems and compliance.
• Ability to work in a highly matrixed and geographically diverse business environment.
• Ability to work effectively within a team in a fast-paced changing environment. Multi-tasks, prioritizes and meets deadlines in timely manner.

Job Description:

• Involved in the whole development life cycle
• Writing, executing, and maintaining test script for automation testing
• Running and analyzing automation test report
• Updating script through each release
• Setting up and maintenance of the testing environment, test data, and Jenkin configuration if required
• Maintaining and updating the framework when the library is upgraded
• Defining, maintaining the test automation framework, and ensuring that appropriate testing tools are selected and applied optimally
• Perform API interface testing, and API automation testing Performance testing
• Bug analysis and tracking
• Continuous improvement of the testing process and testing quality and efficiency
• Be across new technologies and research testing skills and techniques

Requirements:

• At least 4 years experience in QA (Automation) & Mobile Testing
• Extensive automation testing with hands-on experience using Selenium, Appium
• Working knowledge of scripting languages such as Javascript, Java
• Experience with story management and testing tools (e.g. Jira, Testrail)
• Familiar with API Performance Testing tools (K6, Locus…) is a plus
• Familiar with at least one API/Unit testing framework
• Write and execute manual test cases and then automate them
• Working knowledge about Functional and Non-Functional testing
• Good logical and structural thinking
• Strong sense of responsibility and result-oriented
• Good sense for quality, teamwork, and innovation
• Able to work independently or with limited assistance

*Please note that only shortlisted candidates will be notified

Onsite Support Engineer (L3)

Requirements:

• Degree/Diploma in IT or Equivalent
• Minimum 7 Years of experience in IT End User Support (L2/L3)
• Clear understanding and experience in handling End Point Computers and IOT Devices
• Good understanding of Client Server Architecture
• Working knowledge of basic LAN Networking, Cable crimping and basic troubleshooting
• Experience in Disc Encryption, Application Security, and Endpoint security at client level.
• Daily Security and Vulnerability management to maintain KPI and SLA.
• Basic understanding of Active Directory.
• Incident and Change Request support to users.
• Find solution for unseen IT related issues and documentation as SOP.
• Experienced handling large excel files with Vlook-up, pivot etc.
• Experienced in collaborating and managing vendor support.
• Excellent communication and interpersonal skills

Interested Applicants please forward your updated profile to [email protected]

Be part of a renowned M&E company

• Usually 5-day work week (9.00am to 6pm)
• Up to S$5,000
• Good corporate culture with long history

Responsibilities

• Lead and manage the fire protection team (consisting of 1 Assistant Engineer, 3 Technical Officers & 4 workers)
• Develop and implement fire protection strategies, standards, and policies in line with industry regulations.
• Create fire protection plans by working closely with other departments and contractors
• Design and execute fire safety training programs for facility staff and workers.
• Conduct regular inspections and testing to ensure compliance.
• Stay abreast of developments in fire protection systems, codes, and standards. Ensure the team remains updated on best practices.
• Liaise with regulatory bodies, fire departments, and other stakeholders to guarantee compliance with codes and regulations.
• Provide technical support to project teams, contractors, and other stakeholders as needed.
• Oversee the installation, repair, and maintenance of fire protection systems & also to ensure all fire protection systems are in good working condition
• Develop and monitor budgets, providing regular reports to the Director of Facilities Management.
• Maintain accurate documentation of projects

Job Requirements:

• Bachelor’s Degree or Diploma in Facilities, Mechanical Engineering, or equivalent.
• Preferably with a minimum of 3 or 5 years of experience in fire protection or facilities management, with a focus on fire protection.
• Strong knowledge of fire protection systems, principles, codes, and standards is advantageous.
• Experience in managing and leading a team of engineers and technicians.

The Engineer is responsible for the daily operations of the different sections within the Engineering department.

Primary Responsibilities

Daily Engineering Operations

• Operates equipment to deliver comfortable room temperature to hotel guest areas as required.
• Operates equipment to deliver clean water to the respective services in the hotel as required.
• Operates equipment to deliver clean hot water to the respective services in the hotel as required.
• Operates equipment to deliver clear and sharp visuals from television and satellites to hotel guest suites as required.
• Carries out preventive maintenance activities to hotel suites and function areas to the highest quality levels and in a timely manner.
• Plans and operates equipment effectively to deliver audio visual support to hotel events in a timely and efficient manner.

Management of Shift Operations

• Tracks and monitors equipment and facilities failures and rectification status.
• Maintains availability of components / materials needed for Engineering operations.
• Proposes and implements methods of rectification of technical issues in a timely and efficient manner.
• Checks all utilities meter readings and verifies optimal plant operations to ensure longevity and operational readiness at all times.
• Supports the operation of fire protection system and controls fire and safety risks in a timely and efficient manner.
• Supports and implements measures for Environmental Safety and Health compliance in a timely and efficient manner.
• Monitors all lightings on hotel grounds are in operation to ensure longevity and operational readiness at all times.

Operations of the Plant and Facilities

• Operates plant facilities efficiently to support every aspect of hotel operations to ensure longevity and operational readiness at all times.
• Carries out routine preventive maintenance of plant facilities to ensure longevity and operational readiness at all times.
• Organises and carries out statutory inspections of plant facilities to ensure longevity and operational readiness at all times.
• Carries out related service contract activities for each plant facilities in a timely and efficient manner.

Supporting Operations - Craftmen, Kitchen ad Laundry

• Co-ordinates activities with Housekeeping team to carry out all furniture repairs to the highest quality levels and in a timely manner.
• Co-ordinates activities with the respective departments to carry out painting in the hotel suites and function areas to the highest quality levels and in a timely manner.
• Plans and organises preventive maintenance for all equipment in the kitchens to ensure longevity and operational readiness at all times.
• Plans and organises preventive maintenance for all equipment in the laundry to ensure longevity and operational readiness at all times.

Other Responsibilities

• Operations and maintenance of elevators and dumbwaiters to ensure longevity and operational readiness at all times.
• Operations and maintenance of swimming pool and water fountains to ensure longevity and operational readiness at all times.
• Operations and maintenance of fire protection services to ensure longevity and operational readiness at all times.
• Operations of kitchen grease interceptors and sanitary system to ensure longevity and operational readiness at all times.
• Supports operation of television and satellites services for hotel suites in a timely and efficient manner.
• Supports operation of the public music system within the hotel in a timely and efficient manner.
• Reviews and procures equipment and parts for Engineering operations in a timely and efficient manner.
• Reviews and procures Engineering services for outsourced work in a timely and efficient manner.
• Ensures public is protected during maintenance works at all times and proper as well as approved signage is in place at all times.

Involvement In Wider Job Function Actions/Relationships

• Upholds Accor Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect, in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes such as Planet 21 – Corporate Social Responsibility, Diversity and Inclusion, Women at Accor Generation, etc.
• Performs any other duties and responsibilities that may be assigned.

Candidate Profile

Knowledge and Experience

• Tertiary education in a related Engineering discipline.
• Minimum of 5 years of relevant experience in the hotel industry.

Competencies

• Detailed Engineering knowledge.
• Good interpersonal skills.
• Planning ahead.
• Great communicator.
• Good working knowledge of Microsoft Office and Microsoft PowerPoint.
• Ability to communicate with all levels of employees.
• Service oriented professionalism.
• Must work effectively and contribute as a team player.
• Able to deliver proposals effectively.
• Responsive to change effectively.
• Well groomed.
• Sense of urgency and able to set priorities.

Benefits of Joining Raffles Hotel Singapore

• 5-day Work Week.
• Duty Meals are provided.
• Colleagues’ Discount and/or Preferential Room Rates at worldwide Accor Hotels.
• Flexible Benefit – Dental/Optical/Vacation Expenses/Children’s Education.
• Medical and Wellness Benefit.
• Comprehensive Insurance Coverage.
• Local/Overseas Career Development & Growth Opportunities.
• Holistic Learning and Development Opportunities.

· Coordinates construction engineering activities to ensure that projects are implemented in accordance with plans, designs and specifications

· Interprets structural drawings for implementation in construction projects

· Reviews design and discusses modifications with consultants, providing engineering input and alternative methods to address construction challenges

· Raised RFI (Request for Information) on any discrepancies and ambiguities in the design drawings

· Works with construction team, including project managers, site engineers, architects and electrical and mechanical engineers to explain drawings, specifications and other technical information to answer their clarifications

· Conducts regular technical meetings with consultants and client to discuss and resolve construction issues

· Manages structural drafters and reviews shop drawings to ensure these are in compliance with the project specifications

· Monitors changes to designs, assessing effects on cost and assisting with variation negotiations

Maintained up to date documentation and filing system of all relevant technical reports and submissions, drawings and specifications

1. A Degree in Mechanical Engineering or Electrical Engineering from recognised universities.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating mechanical engineering or electrical engineering to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

Report to Senior Engineer (Civil & Structural) / Construction Manager.

Plan daily, weekly and monthly work for each section and liaise on work tasks and construction methods to be used with the foreman and workers.

Reporting to the Construction Manager for all production and labour related aspects of project.

Monitor progress of work, quality of workmanship compliance with requirements and Quality records.

Overall in-charge of construction of road tunnel, escape staircases, utilities & road diversions etc.,

Seek advice and resolve site engineering problems and with Construction Station Manager.

Assist Construction Manager in preparing materials/manpower/equipment/sub-con/supplier requirements for station works based on the baseline programme.

Monitor the progress and update Construction Manager on all issues.

Report/record events and instructions.

Check quality and quantity of subcontract work done.

Involve and pre-start meetings with sub-contractors to discuss method/progress/quality/safety and resources issues.

Interested candidate : Submit your CV to :- [email protected]

Job Description:

• To facilitate information exchange, participate in the majority of product development teams and group, including travel extensively between Europe, Asia and sometimes Africa; and as the bridging gap between the countries based on the specific development works.
• Be part of a team who have joint responsibilities for the overall system design and detailing of the system concepts.
• Refining the system architecture with the project team and keeping a firm eye on the issues of system safety, stability, security, system performance and resilience.
• Be meticulous in the reviewing and revising on the requirements of the various functions between the teams.
• Facilitate communication between Engineering teams and actively contribute to design elements when possible as a mediator of engineering information.

Requirements:

• Degree in Engineering or Applied Science from a recognized university.
• At least 3 years of work experience as an Engineer, with expertise covering all areas of a complex mechatronic system (mechanics, electronics, software, etc.).
• Experience in system design, knowledge of production process and best practices.
• Experienced with a suite of PLC tools and softwares like CODESYS 3.5, with experience in WAGO PFC200 would be advantageous.
• Experienced user of MatLab, Excel, python would be desirable.
• Experience with Autocad 2D, understanding of Single line diagrams and control schematics would also be advantageous.
• Desirable SCADA experience and communication protocols, like, MODBUS RTU / TCP is a plus.

RESPONSIBILITIES

• Manage central console management of all clients IT equipments

• Manage the helpdesk support for incoming and outgoing calls to support customers and ensure closure of all incidents

• Installation, configuration, operation, troubleshooting of customer IT equipments and/or software

• On-site service if issues require on-site support for resolution

• IT projects support and implementation

• Experience in Cyber Security, advanced networking and project management skills

Accountabilities and tasks:

• Enforce and adhere to the corporate IT Standards, policies and procedures governance for corporate infrastructure architecture, security and system administration.

• Perform periodic server health-check and security review.

• Perform network/server/firmware upgrading and patching technical whitepaper or implementation guide for superior.

• Perform network and system monitoring, health check, security review, system backup and restore.

• Liaise with 3rd party software/hardware vendors for support and escalation,

• Perform network installation, management, monitoring, design, and maintenance for Corporate, LAN, WAN, WIFI and equipment.

• Apply developed subject matter knowledge to solve common operational issues within established guidelines and by recommending appropriate alternatives.

• Conduct subject matter knowledge and/or other IT related training to users.

• Recommend and suggest improvements to allow more effective usage of IT Services and support.

• Manage and work with Service Desk System – incidents and requests plus end-user support.

• Perform installation, configuration, removal, upgrading Install and office automation software, PC and Laptop setup and asset disposal.

• Manage IT procurement, vendor management and asset management.

• Other ad-hoc duties as assigned.

TECHNICAL SKILLS

• Basic networking knowledge and email troubleshooting.

• Knowledge in using Microsoft Office (Outlook, Word, Excel, PowerPoint)

• Experience in installation, administration, troubleshoot and configuration of various Windows workstation and Windows Servers / Ubuntu Operating systems

• Hands on experience in basic printer, scanner, routers, switches, wireless, NAS etc troubleshooting and setup.

• Hands on experience with setup, maintenance of Microsoft 365, Google Workspace Cloud solutions.

• Hands on experience with remote access tools.

• Perform on site service if issues can’t be resolved remotely

• Able to work independently with professionalism

MINDSET

• Customer focus – Focus on solving customer IT issues with professionalism.

• Teamwork – Work closely with Sales and Technical team to fulfil customer’s requirement and issues

• Challenger Spirit – Always explore new ways to resolve issue and enhance productivity

• Constant upgrading – Always upgrade new technology skill sets and soft skills to service customer of highest standard

• Fast learner with good time management and organizational skills to deliver critical timeline

Preferred qualities / experiences:

• Minimum 2 years to 5 years of relevant working experience performing the functions of an IT Engineer. Experienced Candidates with more than 5 years’ experience can apply for Senior position.

• Candidates with experience in LAN/WAN, Desktop, Servers administration and support are highly preferred.

• Cisco Certified Network Associate (CCNA) and/or Microsoft Certified Systems Engineer (MCSE) preferred.

• Good technical knowledge and hands-on experience.

• Have a good understanding of IT audit requirements and compliance.

Description:

• The Assistant Engineer shall be able to interpret construction drawings and check the submissions for compliance to the Board’s requirements.
• To review submissions from construction contractors/QP/PE for works affecting water pipes;
• To collate the list of sites for site surveillance;
• To prepare submission report to record the number of submissions reviewed;
• To monitor alerts sent from the Board’s monitoring system and follow up with the construction contractors who are working near to water pipes; and
• To conduct any other works in relation to the submissions as required by the Board

Qualification

• Possess a minimum of Diploma certificate in Engineering or equivalent (Civil Engineering)
• Must be Singaporean.

As a Project Engineer, your main responsibility is to supervise, execute and coordinate project activities together with a group of Engineers and Technicians leading to successful project completion. You will monitor and control project on schedule, within budgeted cost and quality standards. You will also work closely with consultant/owner to ensure project is delivered according to requirements. As an engineer, you are also required to perform system programming and troubleshooting during project implementation.

You should possess a Diploma/Higher Nitec in Electrical and/or Electronics or any Engineering related courses, with 2-3 years’ experience in site supervision and coordination with main contractors and subcontractors, must have hands-on experience in alarm, card access and CCTV system installation knowledge. Must be computer literate.

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

1. A Degree in Engineering(Civil and/or Structural) from local universities or universities recognised by the Professional Engineers Board.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating civil and structural works to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

1. A Degree in Mechanical Engineering or Electrical Engineering from recognised universities.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating mechanical engineering or electrical engineering to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

Onsite Support Engineer (L2)

Requirements:

• Degree/Diploma in IT or Equivalent
• Minimum 4 – 9 Years of experience in IT End User Support (L2/L3)
• Clear understanding and experience in handling End Point Computers and IOT Devices
• Good understanding of Client Server Architecture
• Working knowledge of basic LAN Networking, Cable crimping and basic troubleshooting
• Experience in Disc Encryption, Application Security, and Endpoint security at client level.
• Daily Security and Vulnerability management to maintain KPI and SLA.
• Basic understanding of Active Directory.
• Incident and Change Request support to users.
• Find solution for unseen IT related issues and documentation as SOP.
• Experienced handling large excel files with Vlook-up, pivot etc.
• Experienced in collaborating and managing vendor support.
• Excellent communication and interpersonal skills

Interested Applicants please forward your updated profile to [email protected]

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Collaborate with cross-functional teams to design, develop, and deploy secure software solutions.
• Can implement DevSecOps practices to automate security testing, vulnerability scanning, and compliance checks throughout the development lifecycle.
• Continuously monitor and improve the security posture of our systems, applications, and infrastructure.
• Participate in Agile ceremonies, such as sprint planning, stand-ups, and retrospectives, to ensure timely delivery of features and enhancements.
• Mentor junior team members and contribute to the overall growth and success of the engineering team.
• Stay up-to-date on emerging security threats, industry trends, and best practices in DevOps and Agile methodologies.

• Bachelor's Degree in Computer Science, Engineering, or a related field (or equivalent experience).
• Minimum 3 years of experience as a software engineer, with a focus on DevSecOps and Agile development.
• Good understanding of DevOps principles, including CI/CD pipelines, infrastructure as code, and configuration management.
• Proficiency in programming languages such as Java, JavaScript/Typescript, and experience with version control systems (e.g., Git).
• Hands-on experience with security tools and technologies, such as SAST, DAST, SCA, and WAF will be added advantage.
• Familiarity with cloud platforms (e.g., AWS, Azure, GCP) and containerization technologies (e.g., Docker, Kubernetes).
• Strong analytical and problem-solving skills, with the ability to troubleshoot complex issues and implement effective solutions.
• Excellent communication skills and the ability to collaborate effectively with team members across different disciplines.
• Certifications such as Scrum Master or Certified DevOps Engineer are a plus.

As a Cloud Security Engineer, you will play a crucial role in designing, implementing, and maintaining security measures to protect an organization's cloud-based infrastructure and data. This role requires a deep understanding of cloud technologies, security best practices, and a proactive approach to identifying and mitigating security risks.

Responsibilities:

• Design and implement secure cloud architecture for various cloud platforms (AWS, Azure, GCP).
• Work closely with architects and developers to ensure security is integrated into the entire cloud environment.
• Implement and manage security monitoring tools for cloud environments.
• Respond to and investigate security incidents, providing timely resolution.
• Ensure cloud environments comply with industry standards and regulations.
• Implement and monitor governance frameworks for cloud security.
• Develop and maintain scripts or automation tools for security tasks.
• Implement DevSecOps practices to integrate security into the CI/CD pipeline.
• Conduct regular vulnerability assessments and coordinate remediation efforts.
  Keep abreast of emerging threats and vulnerabilities in cloud environments.

Required Skills

• AWS Inspector
• AWS GuardDuty & Security Hub
• Integrate AWS events with Azure Sentinel
• 3rd party firewall appliances – Palo alto
• CyberArk – Installation & Configuration

Qualifications:

• Bachelor’s degree in Computer Science, Information Security, or a related field.
• Proven experience in cloud security, with a focus on AWS
• Strong understanding of networking, encryption, and authentication protocols.
• Experience with security tools and technologies for cloud environments.
• Excellent problem-solving and communication skills.
• Ability to work collaboratively in a team and take initiative in a fast-paced environment.