1. Prepare submission to client / Authority;

2. Monitor submission approval / necessary follow up;

3. Assist in project coordination & related site work activities;

4. Planning work schedule;

5. Monitor work progress and the quality of work; &

6. Enforce compliance to Authority and Safety & Health requirement;

• Support Project Management and Quality Assurance matters for EHS department
• Assist in daily operations of the Environmental Services.
• Follow up with laboratories to receive results on time
• Prepare draft report

Specific responsibilities:

• Support Project Management – Follow up with clients, reports etc
• Ensure that all operations are conducted within client and recognized industry health and safety requirements
• Lead Quality Assurance matters – Review reports
• Ensure that the Department Quality System is fully implemented
• Co-ordinate with Laboratory employees for quality testing and client’s requirement.
• Assist in the day-to-day operations of the Environmental Services.
• Perform any tasks as and when required by management.

Requirements:

• Graduate in Environmental Science/Engineering or equivalent
• Prior experience in field work for Environmental related services or testing is an advantage.
• Able to work independently and to coordinate several activities simultaneously
• Good communication, negotiation and interpersonal skills
• Able to maintain highest quality standard all the time
• Able to maintain good turnaround time (TAT) and on time delivery (OTD)
• Technical knowledge and experience in related field and in using quality management methods and tools
• Able to interact with all levels of management, suppliers and clients
• Works well under pressure, challenges status quo

• Position: Service Engineer (Crane/Heavy Equipment Industry)
• Location: Tuas (company transport provided)
• Working hours: Monday to Friday (8.30am - 4.30pm)
• Salary (commensurate with experience): Up to $4,000 + OT Payable + AWS + Performance Bonus + 14 Days Annual Leave + Transport Allowance + Meal Allowance
• Duration: Permanent
• Industry: Equipment & parts distributor (MNC)

Main Responsibilities:

• Product delivery training to distributors and customers
• Provide diagnosis guidance and analyzing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue
• Furnish warranty claims and quality report to drive quality improvement on our products
• Any other ad-hoc duties assigned

Requirements:

• Minimum Diploma in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess a valid Class 3 Driving License
• Will involve travelling to other countries within Asia, entitled to travelling allowance

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

JOB SUMMARY:

Coordinate Gradiant Field Construction and manage Operation activities in Singapore and in Southeast Asia (as long as travels reasonably allow). Responsible for the Coordination, Operations, and Maintenance of Gradiant systems during construction, commissioning, operations and defect liability period phases. Represent Gradiant locally in compliance with Company culture and standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

In collaboration and alignment with Corporate Engineering, Project Management, Procurement:

• Conduct Field Engineering during the piloting, construction, commissioning and operation/maintenance/DLP/after sale phases of Gradiant’s Projects in Singapore and overseas with minimal supervision.
• Provide technical and hands-on support for the implementation of pilot studies and commercial operations (e.g. process adjustments, chemical preparation, preventive maintenance activities, corrective maintenance, instrument calibration, membrane cleaning, troubleshooting, process optimization) as directed by Gradiant Operations and Process Engineering Managers.
• Manage Gradiant and/or its partners’ site operators in implementing good practices for plant operations and maintenance and daily operational activities through preparation and implementation of standard operating procedures (SOPs) and technical training.
• Support the development, establishment, and maintenance of plant performance monitoring, reporting and improvement.
• Proactively report and investigate plant performance/reliability issues and propose practical and cost-effective solutions.
• Coordinate and oversee the relevant technical support to the operating sites, as to reduce unplanned downtime through failure analysis and corrective actions implementation.
• Support the preparation of the predictive and preventive maintenance programs at operating sites and closely monitor their performance.
• Participate in technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s local representative.
• Promote and support Gradiant after sales services, including spare parts, consumables, ad hoc operational and site technical support. Work closely with Engineering and Procurement departments to correctly specify and source materials and services.
• Positively promote a safe and healthy work environment and employ safe work practices at all times, including documenting incidents and recommending and following through on corrective actions.
• Monitor compliance with contractual and regulatory requirements.
• Maintain efficient communication and information sharing between the Operations Department and Engineering/NPI Departments including writing and issuing technical reports and Return of Experience/Lessons Learned reports.
• Carry out other duties as may be assigned from time to time by your supervisor.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least formal trade qualifications. Bachelor's Degree/Post Graduate Diploma/Professional Degree in Environmental, Chemical, or Mechanical Engineering is desirable.
• At least 2 year(s) of experience in Commissioning and/or in Operations and Maintenance in the water industry is required for this position.
• Familiar with various water and wastewater technologies
• Proficient in Microsoft Office Suite
• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities
• Reliable, well organized, and detail-oriented
• Fluency in English
• Applicants must be willing to travel as and when required (up to, and sometimes exceeding, 50%)
• Familiarization with mechanical,electrical,Instrumentation and Controls of process plants
• Commissioning activities like SAT/FAT,instruments,valves and controls loop check

JOB SPECIFICS:

• Ability to work in a high energy, start-up based environment.
• Strong communication skills to convey ideas and technical information effectively with team and customers.
• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.
• Pays attention to detail, identifies & solves complex issues.
• Checks work for quality.
• Shares suggestions to improve quality & productivity.
• Works independently with minimal supervision.

• Undertake design for road and drainage, including long section and cross section of permanent and temporary stages
• Study and propose utility diversion for permanent and temporary stages
• Assist in developing the specifications and tender documents, cost estimates, calling tenders and tender evaluation.
• Undertake design development, prepare technical reports and supervision of roads and utilities works for infrastructure projects.
• Communicate with clients, sub consultants, approving agencies, etc, for purposes of obtaining information and approvals.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

As an AI research engineer, the candidate will work on an automatic disassembly for EoL waste management. The candidate will assist in:

• Research and evaluate state-of-the-art open and closed-source LLM models and Retrieval-Augmented Generation (RAG) techniques
• Process unstructured technical documents from automotive and EV products to extract relevant text and images using multi-modal LLM
• Assist in developing and refining LLM and RAG models to improve performance, accuracy, and efficiency.
• Collaborate with the team to integrate AI models into broader systems or applications, considering scalability and deployment strategies.
• Document findings, methodologies, and outcomes, contributing to internal reports and potentially patent applications.
• Engage in team meetings and contribute to brainstorming sessions aimed at driving project success.

As a robotics research engineer, the candidate will work on developing a new testbed towards automation autonomous disassembly process in e-waste management. The candidate will assist in:

• Development of the testbed to integrate sensors, robots, conveyor belts, workbench, controllers, etc.
• Programing and integrating industrial robots to perform tasks such as pick-n-drop and execution of disassembly action.
• Development and maintenance of prototype applications based on controllers such as Raspberry Pi and Arduino
• Improving trajectory planning algorithms to ensure high throughput of operations such as pick-n-drop
• Developing automated robot trajectory planning for robotic 3D scanning and disassembly, and automated generation and execution of disassembly actions.
• Closely communicate with other teams and presentation slides

Key Responsibilities:

• Configure, and manage Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS) to maintain a secure and efficient network infrastructure.
• Implement and maintain Palo Alto and Fortinet Fortigate Firewalls for network security and access control.
• Administer Alcatel Lucent Wireless Controllers to ensure a secure and robust wireless network environment.
• Utilize SolarWinds NPM (Network Performance Monitor) and NCM (Network Configuration Manager) for network monitoring and configuration management.
• Manage and maintain ClearPass Policy Manager for network access control and policy enforcement.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or related field.
• 3+ years of experience in network security engineering.
• Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).
• Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.
• Hands-on experience with Alcatel Lucent Wireless Controllers.
• Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.
• Proficient in ClearPass Policy Manager for network access control and policy enforcement.

Knowledge of network protocols, security architectures, and best practices

Job Description:

We are seeking a highly skilled and experienced Construction Project Manager to oversee and manage construction projects from inception to completion. The ideal candidate will be responsible for ensuring that projects are completed safely, on time, and within budget while meeting all technical specifications and regulatory requirements.

Responsibilities:

· Manage, design, develop, create, and maintain small-scale through to large-scale construction projects in a safe, timely, and sustainable manner.

· Conduct on-site investigations and analyze data (maps, reports, tests, drawings, and other).

· Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

· Assess potential risks, materials, and costs.

· Provide advice and resolve any emerging problems or deficiencies creatively.

· Oversee and mentor staff and liaise with a variety of stakeholders.

· Handle over the resulting structures and services for use.

· Monitor progress and compile reports on project status.

· Manage budget and purchase equipment/materials.

· Comply with guidelines and regulations, including permits, safety, etc., and deliver technical files and other technical documentation as required.

· Able to raise technical issues and coordinate site activities with subcontractors.

· Familiar with civil engineering drawings and raise technical queries to resolve discrepancies between drawings in relation to site conditions during project execution.

· Carry out in-progress inspection and joint inspection to ensure that the works were executed to contract drawings and requirements.

· Carry out duties in accordance with workplace safety programs, procedures, and policies.

· Act as a point of contact and facilitate between Tenders and External Consultants.

· Be accountable for preparing technical proposals for tenders, including master programs, method statements, resources allocation charts, traffic/utilities diversion plans, risks identification & mitigation plans, etc., as per tender requirements.

Logistics and Warehouse Management Responsibilities:

· Strategically plan and manage logistics, warehouse, transportation, and customer services.

· Direct, optimize, and coordinate the full order cycle.

· Liaise and negotiate with suppliers and manufacturers.

· Keep track of quality, quantity, stock levels, delivery times, transport costs, and efficiency.

· Arrange warehouse, catalog goods, plan routes, and process shipments.

· Resolve any arising problems or complaints.

· Supervise, coach, and train warehouse workforce.

· Meet cost, productivity, accuracy, and timeliness targets.

· Maintain metrics and analyze data to assess performance and implement improvements.

· Comply with laws, regulations, and ISO requirements.

Qualifications:

· Bachelor's degree in Civil Engineering, Construction Management, or related field.

· Proven experience as a Construction Project Manager or similar role.

· Strong knowledge of construction management processes, means, and methods.

· Familiarity with construction management software packages.

· Ability to plan and see the "big picture".

· Competent in conflict and crisis management.

· Excellent time and project management skills.

· Outstanding communication and negotiation skills.

· Excellent organizational and leadership skills.

· Decision-making ability and attention to detail.

Work Details :

· Working Hours: 9am – 6pm

· Working Days – 6 days

· Work Location : 1 Tuas south ave 6 #06-13 Singapore 637021

Healthcare Project

Job Description:

• Manage and supervise a team of technical supervisors RTOs in performing their duties on site with respect to C&S engineering works, architectural and M&E engineering works. RE to ensure that all site activities comply with the regulations and client's requirements.
• Report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timely completion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must have the strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements especially to comply with BCA's criteria for buildability and safety assurance system.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Implement and sustain the site supervision quality & safety assurance system
• Ensure that proper site documentation for on-going works, site meetings, safety records, method statements, shopdrawings, as-built submissions, etc are well managed.
• To attend site progress, technical, client-consultant, variation and coordination meetings
• Any other task assigned from time to time.
• Estimated commencement of work in July 2024.

Job Requirements:

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore
• Accredited with IES/ACES with a valid Resident Engineer Practicing Certificate
• Minimum 8 years’ C&S work experience with strong knowledge in construction of building structures.
• Knowledge in BIM and VDC capabilities will have an added advantage
• A good team player with effective communication skills and able to interact with people at all levels.
• Preferably with experiences in healthcare projects.
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements
• Good supervisory and leadership skills, with experience in leading a team of Resident Technical Officers

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Key Responsibilities

• Lead and supervise a group of technicians, and manage contractors in the execution of refinery maintenance activities.
• Ensure preventive maintenance is carried out as planned, monitor progress and performance of critical equipment and conduct failure analysis and implement recommendations for reliability improvement.
• Develop and implement work plans, including purchase requisitions, selection/evaluation of contractors, as well as maintenance activities scheduling and costing.
• Supervise, audit and carry out timely updates of equipment data & maintenance information.
• Develop and conduct Risk Assessments, safety training, work procedures etc.
• Participate in project review to identify maintenance aspects/impact on project.

Requirements

• Degree in Mechanical Engineering
• 2 years’ experience in maintenance of plant equipment, preferably in oil refinery/petrochemical or related industries.
• Candidates without relevant experience may be considered for entry-level position.
• Good knowledge of computerized system for routine and TAR maintenance. Familiarity with SAP and Primavera will be an added advantage.

• Basic $3,500 - $4,500

• Lead Food Safety risk assessment and quality records (QRs) for escalation on lines as per Global GMP lifecycle policy.
• Provides support and inputs to update Food Safety Policy and site HACCP.
• Provide support to the Manufacturing organization to facilitate the efficient operations within the production area.
• To optimize existing processes and to ensure that production goals are met. Ensures systems and processes to maintain GMP at workplace.
• Collaborate with Operations sub-functions in tracking critical production and cleaning parameters to track and collate responses for consumers/medical/affiliates escalations.
• Monitors performance of equipment, machines and tools and corrects equipment problems or process parameters that can produce non-conforming products.

Major Responsibilities:

• Responsible to Manage and focus directly on GMP food safety engineering/food security and validation, in preparation for the commercial production of regulated products.
• Lead projects of facilities and equipment and optimization of existing manufacturing processes to deliver products with the production requirements consistent with Gold Standard Policies.
• Responsible to perform quality events investigation and coming up with CAPA action. Ensuring the effectiveness of CAPA action.
• Responsible to Motivate, develop and train employees for the facility and from third party as part of food safety program.
• Lead incident reviews to investigate and correct microbiological non-conformities and provide recommendation regarding process design, product disposition and continuous improvement.
• Optimize the documentation for quality systems, cleaning and validation, SOPs, HACCP plans, and food safety policy and protocols.
• Ensures plant Food Safety documentation is maintained in an audit-ready state, meeting all statutory, regulatory requirements & customer expectations.
• Ensures the effective use of materials, equipment, and personnel in producing quality products at an effective operating cost.
• Responsible for compliance with applicable Corporate and Divisional Policies and Procedures.
• Prepares reports, publishes, and makes presentations to communicate findings.
• Partner with Engineering on the installation, modification, upgrade and maintenance of manufacturing equipment.
• Implement, document, and maintain controlled, repeatable production processes.
• Development of qualification and validation protocols.
• Participate in and/or lead qualification and validation activities.
• Interface with other departments and suppliers to address root causes.
• Understands the business needs of the company and has knowledge of the customer needs of our business.
• Cultivates internal and external network of resources to complete tasks.
• Any other duties as assigned by supervisor.

Skills/ Experience Requirements:

• 1 to 2 years of related experience.
• Knowledge in SAP system/POMS/MES.
• Knowledge about food microbiology, pathogens and food safety.
• Able to make fast decision and react efficiently to situation.
• Understands engineering principles, theories concepts, practices and techniques

Education:

• Bachelor’s degree in Process Engineering/ Mechanical/ Electrical/ Food Science
• Biotechnology/Microbiology or in related discipline or with a minimum 1-2 years of related experience.

Salary $2800 ~ $3500
♦ 830am - 5pm (Monday – Friday)
♦ 830am - 4pm (Saturday)

Job Description:

• Assist Electrical Engineer on Hands on for electical testing on equipment.
• Understand the operation of various electrical equipment and systems.
• Supervise maintenance electrical activities.
• Willing to learn and have positive attitude towards electrical learning.

Requirements:

• Diploma/Degree in Electrical Engineering or related
• Fresh graduates are welcome

This is a global, multi-discipline team responsible for architecting and delivering secure, robust, and innovative solutions which would enable the development teams to build and deploy new applications as well as migrate selected existing applications into the public cloud.

The team works with multiple public cloud providers and are presently looking for an experienced Cloud Engineer familiar with various cloud concepts, services, and tools, preferably from multiple public cloud providers but primarily in the Cloud Identity and Access Management (CIAM) space. The candidate will be involved in multiple aspects of the team’s work, including evaluation of new cloud products and services, and integrating them into standard client cloud solutions.

• Providing IAM solutions for migrating existing or integrating new applications in the Client environment across multiple Cloud providers including but not limited to Azure and AWS
• Provide IAM services for complex, multi-tier applications that are migrating to Cloud Platforms
• Selecting appropriate IAM Cloud controls for migrating applications based on given requirements
• Working in a globally distributed team to provide innovative and robust Cloud centric solutions
• Closely working with Vendors to develop and deploy Cloud services to meet customer expectations
• Integrate, configure, document, and deploy compliant infrastructure and supporting services in the Cloud platform
• Design, Optimization and Document the Operational aspects of the Cloud platform
• Troubleshooting problems, resolving root cause, and where possible, fixing the bug(s)
• Collaborate with Risk Management to ensure necessary controls to Cloud services are deployed and tested Skills Required:
• Strong knowledge of Azure AD and related services such as Conditional access, Identity protection, Privileged identity management, etc.
• Strong knowledge of authentication with SAML, OAuth, OpenID, and Kerberos
• Experience in providing Federated Identity with solutions such as PING Federate or ADFS
• Knowledge of the Zero Trust Architecture principles
• Prior experience in providing RBAC solutions for AWS and Azure
• Experience creating technical architecture documentation
• Strong communication and written skills
• Strong scripting and automation abilities including PowerShell and/or Python

Skills Desired:

• Prior experience in the Identity space with a background in Active Directory or similar LDAP stores
• Working knowledge of Azure Active Directory Connect synchronization software or similar technology
• Prior experience using compliance assurance tooling such as Prisma Cloud
• Prior experience with products from HashiCorp such as Terraform, Vault and Consul
• Prior experience with risk control frameworks and engagements with risk and regulatory functions
• Knowledge and experience of working with CI/CD frameworks and methodologies such as automated testing (unit / integration) and release pipelines (e.g. Jenkins, GitHub Actions)
• Experience in the financial industry

• Lead Production team to drive kaizen events and continuous improvement projects.
• Plan and assign daily work schedule for technicians.
• Develop training plan for team members to meet production demands.
• Investigate and resolve production technical challenges.
• Provide equipment and production tools as needed to ensure that business continuity and manufacturing efficiencies.
• Support and work with NPD and RR to conduct manufacturing process trials and prove out.
• Maintain reliable and safe production activities while improving manufacturing efficiencies.
• Improve process capability and production volume while maintaining and improving quality standards.
• Monitor Production metric and develop continuous improvement plan through process improvement.

Requirement

• Minimum Diploma in Mechanical Engineering or relevant discipline
• 10+ years of experience in relevant industry is required (Oil & Gas and Manufacturing combined).
• Good understanding of LEAN Six Sigma.
• Leadership experience in managing technicians is preferred.
• Experience in assembly and testing processes is preferred.
• Experience in SAP is preferred.
• Willing to working on shift or on weekend as and when required.

Key Responsibilities:

• Configure, and manage Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS) to maintain a secure and efficient network infrastructure.
• Implement and maintain Palo Alto and Fortinet Fortigate Firewalls for network security and access control.
• Administer Alcatel Lucent Wireless Controllers to ensure a secure and robust wireless network environment.
• Utilize SolarWinds NPM (Network Performance Monitor) and NCM (Network Configuration Manager) for network monitoring and configuration management.
• Manage and maintain ClearPass Policy Manager for network access control and policy enforcement.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or related field.
• 3+ years of experience in network security engineering.
• Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).
• Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.
• Hands-on experience with Alcatel Lucent Wireless Controllers.
• Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.
• Proficient in ClearPass Policy Manager for network access control and policy enforcement.
• Knowledge of network protocols, security architectures, and best practices.

PT Trakindo Utama Singapore Branch is expanding! The Power Systems department is looking for two exceptional project engineers to bolster the department's capabilities! Aspiring applicants can look forward to a dynamic career, engaging stakeholders on all aspects of their electrical needs, and to exercise their creativity and robustness in delivering solutions and customizations!

Our office is located just 6 minutes away from Tuas Crescent MRT, within walking distance from the MRT Exit.

We invite aspiring applicants to join our team, and experience the prestigious legacy of our Company, let's advance forward together!

Primary Objective of Position

• Responsible for all electrical aspects and management of projects, including tendering, design, drawing, scheduling, purchasing, testing, packing, shipment and commissioning of power generation sets on site.

Duties & Responsibilities

• Coordinate all electrical interfacing of designated projects to meet specifications
• Instruct draughtsperson to prepare electrical drawings for tender replies and awarded projects according to customers' specifications
• Review returned drawings and modify as required for construction
• Coordinate with contractors on genset build up
• Provide specifications for control panels, generators and switchgears to vendors
• Liaise with vendors for quotations to procure/fabricate
• Coordinate with Parts Dept on order for CAT parts
• Assist with final technical inspections and testing of equipment
• Prepare packing list and coordinate with HPL on packing, delivery and shipment
• Perform on site commissioning as and when required
• Prepare project costing and report to the Project Manager
• Attend/Conduct engineering and project meetings both in Singapore and overseas (when required)
• Perform calibration of electrical items
• Assist in review and update of department procedures and manuals
• Fulfill other adhoc duties as assigned by Management

Person Specifications

• Possess a degree in Electrical/Power Engineering or 2 years of related experience in Power Generation Engineering and/or Project Management
• Proficient in Microsoft Office applications
• Knowledge in electrical aspects of power systems and control panels

Responsibilities:

Database Administration

• Act as the Subject Matter Expert for database-related services.
• Manage the daily BAU operation of database-related services.
• Carry out service monitoring, end-to-end performance correlation, and database performance optimization. Create, review and update system documentation and work instructions to enhance the efficiency of daily operations.
• Perform capacity planning to size database resources to meet the demands of application workloads.
• Plan, execute, and monitor backup schedules in accordance with business needs and data retention policies.
• Review database security, perform database hardening, and apply regular or ad-hoc security patches to ensure compliance with IT security policy.
• Coordinate/Support with application support teams to schedule database updates and upgrade databases with minimal business impact.
• Provide Level 2 support for database service-related queries.
• Perform incident escalation in accordance to escalation procedures.
• Coordinate with other functional teams in incident handling, and ensure incidents are resolved or work- around within stipulated SLAs.
• Contribute to or drive root-cause analysis.
• Ensure that all internal processes and procedures are up to date and in accordance with the company's directives.

Data Services Provisioning

• Perform requirement gathering with application support teams.
• Recommend appropriate data services and system capacity according to agreed requirements.
• Develop configuration policies to optimize security, performance, and availability.
• Set up data services according to policies and guidelines.
• Set up data pipelines for data analytics and dashboard initiatives.
• Coordinate with other functional teams to complete the work required to operationalize data services such as IP address assignment, DNS requests, firewall port opening and security scan, database onboarding, data pipeline creation, database monitoring, and database performance monitoring.
• Ongoing review and improvement of process flow, system, and processes through automation, innovation, as well as the adoption of new technologies.

Implementation of IT Initiatives and Solutions

• Provide feedback on the design of data services for new systems.
• Support execution of database services initiatives and business projects.

Requirements:

• A recognized diploma or degree in IT or related fields.
• Minimal 5 years of hands-on experience in systems and database administration in an enterprise or campus environment.
• Hand-on experience in administering MSSQL, Oracle database (10g and above), Oracle high availability technologies such as RAC and Data Guard, database performance tuning and troubleshooting, and database upgrades and migrations tools.
• Hand-on experience in data cleansing, data transformation, and data quality management.
• Hand-on experience in developing dashboards using data visualization tools e.g., Qlik Sense, Power BI and etc.
• Knowledge of MariaDB, MySQL, and PostgreSQL.
• Experience in Windows, and Linux variants, preferably Red Hat and Ubuntu.
• Experience in capacity planning, availability management and business continuity management.
• Experience in project management.
• Independent, highly motivated and a proactive team player who can work with minimal supervision.
• Excellent in written and verbal communication.

The following certifications while not necessary, will be an added advantage:

• Database Administrator Certified Professional for MSSQL/Oracle/MySQL
• ITIL Foundation Level
• Certified Professional in Data Analytics/Data Visualization/Data Virtualization/Machine Learning
• AWS/Azure Certifications

About the role

This position is for a Project Engineer, an established professional in New Equipment Modernization responsible for project schedule updates, report documentation, and acts as the primary contact with customers. Resolves customer issues and escalates more complex issues as needed.

Key Responsibilities:

As a Project Engineer, you’ll be responsible for:

• Reviews project expenditures to ensure the accuracy of all invoices/applications for payment in accordance with purchase order and subcontract terms and conditions. Also ensures that they are processed (approved/authorized)in a timely manner.
• Updates project schedules and prepares project management correspondences and documents effectively on all aspects of the implementation phases, including customer meeting minutes, team assignments/action item tracking, letters, memorandums, transmittals and RFIs.
• Acts as the primary contact with customers, develops a professional relationship, and understands the customer needs to meet those within the bounds of contracted scope.
• Understands and communicates job schedule to all project team members to ensure timely completion of project.
• Adjusts orders for any changes to the scope for moderate projects.
• Manage Project and Controls
• Attend to Meetings with customers, consultants, contractors, etc .
• Paper documentation submission, approval, job site status,
• Manage sub-contractors.

Requirements

We are looking for people who has excellent stakeholder management and experienced in project management. If this is you, get in touch.

As a minimum you must have:

• Minimum Diploma holder in Engineering
• Minimum 2 years of relevant experience in project management.
• Preferably possesses certification such as Project Management certifications and Work at Height certifications
• Experience in Office Skills (Excel) is desired to have

Job Info:

• Salary: Basic from $4000 - $4500 + Performance Bonus
• Working Hour: Monday - Friday (9am - 6pm)
• Location: Pioneer

Job Scope:

• Ensure client instructions were properly documented and communicated downstream
• Interpreting of customer's documents and ensure Customers' instructions align with the work scope stated in quotation.
• Cross-reference customer's instructions with reference specification(s)
• Ensure proper markings of Samples for machining/cutting
• Comprehensive and accurate input in DWO
• Check for all internal (e.g., quotation) and external (e.g., mill certificate) documents and upload to system
• Ensure instant update of the documents whenever there are changes
• Ensure instant communication of any changes to downstream personnel
• Oversee the scheduling and coordination of the test jobs with Workshop and Testing Department(s), including ensuring there is prioritization of jobs
• Ensure anticipation of longer lead time for jobs that require special preparation works for specimens or fixtures
• Understand customers' testing objectives and Attend to Customers' enquires and to provide professional technical advice
• Work with Draftsman to draw up sample plans to advise customers and instruct workshop on cutting/machining

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

SR Quality / Quality Lead/ Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Lead/ Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead 4 Quality Control Inspectors and liaise with internal & external stakeholders.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.