Service Engineer (Electrical), Pneumatic & Hydraulic Engineer.

Tuas Area. Tel: 8729 1721 (Operations)

- Able to read & fully understand electrical, electronic components & circuitry diagrams.

- Able to carry check, service & troubleshoot at least one of the following systems: Boiler control system, ODME control system, Cargo tank monitoring system, Main switchboard/ Power Management System

- Able to carry out PLC programming.

- Able to read & fully understand all types of pneumatic/ hydraulic control/ system drawing & other logic components for the marine oil & gas industry.

- Able to check, service & troubleshoot at least one of the following systems: Hydraulic crane, winch & valve control system, Ballast tank remote monitoring system, Various pneumatic transmitters, positioner & controller calibration, M/E remote control system

Other Information

• Company Feeder Transport is provided.
• Language: Bilingual in English, Mandarin & Malay
• Location: Tuas South
• Working Days
• Mon – Fri 08:00 a.m. – 5:00 p.m
• Sat 08:00 a.m. – 12:00 p.m. (alternate)
• Transport provided: Company Feeder Transport is provided at the stated Pick-Up/drop-off points in the Jurong West area (near Boon Lay MRT)

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

To fabriacte new electrical panel

To know how to troubleshoot electrical issue

To run electrical wiring

To write electrical program on PLC

To help with mechanical work

To go onsite to do electrical installation or onsite troubleshooting

To work with a team or able to work individually

Able to do electrical schematic drawing

As an Automation Systems Engineer, you will work directly with customers to define functional requirements and design, configure and implement control systems, software prohrams, electronic circuitry or packing for products or systems.

Description of work:

• Work in a team environment with engineers and designers from RoviSys, partners and clients to provide state of the art Control Systems to improve efficiency, product quality and profitability of process manufacturing.
• Design Electrical Panels, Control Architecture, and wiring drawings.
• Develop and build solutions using different industrial applications.
• Development of P&ID documentation for process clients.
• Define and implement Programmable Logic Controller (PLC)/Ladder Design, Distributed Control System (DCS) configuration to meet client needs.
• Execute and lead services such as system upgrades, system support and routine maintenence.
• Implementation of industrial application based on solution architect and technical lead's design.
• Testing and on-site commissioning of control systems.
• Support of process control clients at sites in Singapore and abroad.
• May grow into position leading team of engineers and technicians to provide control system solutions for clients.

Control Systems knowledge:

• Electrical design and Process Control fundamentals.
• Familiar with Controllers, such as single loop control, PLC, DCS, DDC or PC based control.
• Exposure to Control Theory and some process understanding is helpful but not required.
• Platform knowledge in Rockwell Automation, Siemens, Emerson, DeltaV, etc.
• Process understanding of batch or continuous process control, combustion control, etc.
• Awareness of process safety, validation, and good documentation practices.
• Programming languages: PLC ladder logic, Function Block, SFC VB.
• Third party HMI/SCADA Software, i.e. Intellution, WonderWare, OSIsoft, etc.
• Others: network design/administration.

Qualifications:

• Self-motivated, with excellent communication skills and enjoy working with people.
• B.S in Engineering, Physics, or related fields.
• Process or Industrial experience is a plus.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

Interested candidates are to submit a detailed resume to speed up the application process.

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

We are seeking a Sales & Application Engineer to provide professional, innovative and cost-effective rental power & cooling solutions to customers.

Responsibilities:

1. Support in rental power & cooling equipment, system design and solutions.
2. Develop plans for the rental sales business in market segment.
3. Manage secured projects diligently in terms of costing, timely planning of delivery schedule, equipment readiness, project management and ensure prompt collection
4. Maintain, develop and expand key accounts
5. Tender submission/preparation and including production of specifications, drawings and commercial documentation
6. Compiling sales reports and implementing sales strategies
7. Assist in developing business plan and initiatives that will maximize business potential in the region.

Qualifications and Requirements:

1. Diploma/Degree in Electrical/ Electronic Engineering, Control Systems, Mechatronic Engineering or Instrumentation and Automation, Mechanical/ Automotive Engineering.
2. Preferable with 3-5 years job experience in one of these industries: Marine Offshore, shipyard, Power Generation, M & E, Utilities.
3. Possess a valid driving license and must have their own vehicle.
4. Candidates must be able to communicate and write effectively in English and with MS Office Application.
5. Candidate without above qualifications but with good Electrical Power distribution and with experience HVAC knowledge or good customer contacts in the relevant fields may be considered.
6. Results oriented with good communications skills
7. Creative, enthusiastic and committed sales professionals with the drive to succeed both in individual performance and team work.
8. Able to demonstrate a proven track record in similar environment.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cyberscurity and Cloud Infrastructure Engineer to join us (the employment contract will end on 31 March 2026).

You will be working on:

• Responsible to develop, setup and maintain large scale log ingestion cloud infrastructure.
• Responsible to handle the log ingestion workflow from Subscriber till backend SOC.
• Develop automation for end-to-end log ingestion processes to facilitate scalable ingestion infrastructure and provide better Subscriber experience.
• Develop and maintain custom log parsers.
• Monitor and respond to incidents for the cloud infrastructure and log ingestion system.
• Provide consultancy to Subscribers and their contractors on their log ingestion matters.
• Assist Subscribers on-site to setup and troubleshoot their log management system, ensuring
• their log are successfully being forwarded to the SOC.
• Engage stakeholders and enhance operations to improve on the log ingestion workflow/pipeline.

To succeed in this role, you will ideally have:

• Minimum 3 years of working experience as Cloud Infrastructure Engineer or Cloud DevOps Engineer on AWS, Azure or GCP.
• Experience with IAC deployments and it’s best practices
• Good to have knowledge on Node.js, Python or other scripting languages
• Good to have knowledge and experience on GitOps
• Possess good communication skills and interpersonal skills.
• Passion for improving operations to ensure the system are secure and resilient.
• Self-motivated, driven, and possesses a strong aptitude for continuous learning.
• Good team-player who is willing to help the team to succeed in the achieving the objectives.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• Annual Leave Benefits with additional perks such as Family Care and Birthday Leave.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.

The Asia Pacific (AP) Team is delivering innovative energy solutions to the world and seeking a motivated Principal Applications Engineer (PAE) to join our exciting Oil and Gas Business Development team.

As a PAE, you are responsible for directing the Company's internal activities associated with supporting the sale of new turbo-machinery packages for the Oil and Gas market across the Asia Pacific region.

You collaborate closely with Field Sales and a wide cross section of other departments to plan, develop, and execute technical and commercial strategies necessary to successfully compete for new equipment business.

Specific responsibilities include the review of customer specifications, selection and optimization of Solar's turbo-machinery equipment offering, pricing custom features, coordination of Construction Services and Customer Services scope, and proposal preparation.

We are looking for a passionate contributor who can move the needle to win business with the Sales team and a strong desire to advance into an international field sales position in the future.

Nature and Scope:

• Provide product and application expertise to the global field sales teams and customers.
• Develop solutions to technical problems involving other Solar organizations such as Engineering, Project Management, and Quality as well as external suppliers and customers in the resolution of specific issues.
• Apply state-of-the-art tools for producing data that describes the selected equipment.
• Consult with Sales on Solar’s solution capabilities to improve the competitiveness of Solar’s offering.
• May assist Sales in difficult or complex customer negotiations as well as in the implementation of complex projects.
• Identify creative solutions to manage Solar’s risks associated with projects.
• Is responsible for not only identifying and managing critical issues but also for bringing them to an agreeable conclusion.
• Participate in the discussion of the philosophy, design, and application of package features and alternatives.
• Continually increase product and process knowledge in order to perform duties more effectively.
• Improve knowledge of the performance capabilities and limitations of Solar’s entire product line, as well as knowledge of sales strategy, economics, competitor capabilities, and customers.

Principal Accountabilities:

• Provide timely and accurate support to Field Sales personnel to assist in the capture of new equipment sales.
• Assist in the preparation of proposals by reviewing customer specifications, developing corresponding technical comments/exceptions and developing Applications Check-sheets (ACS) with accurate custom feature pricing.
• Select the optimum equipment configuration to competitively satisfy the customer’s needs.
• Devise alternative innovative approaches to customer applications when standard equipment cannot be utilized.
• Ensure commercial and technical risks are effectively managed during proposal preparation and specification reviews.
• Defend Solar’s standard product design in customer negotiations. Using your relationship-building skills, influence customers decisions towards Solar’s solution.
• Upon a successful order, hand the project over to Business Management, and Project Engineering, with complete technical and commercial definition but also critical commercial and technical issues so that it can be executed efficiently.
• Coordinate and assign tasks to other company departments and groups as part of the response coordination in support of customer inquiry activity.
• Define projects accurately to ensure margin erosion is minimized through shipment.
• Continue to expand product knowledge. Utilize PAE tools to generate proposals, custom features and ACS’s.
• Responsible for several relatively difficult inquiries. Spend considerable time in customer meetings and negotiations.

Environment:

• Occasionally collaborate with teams in the USA requiring a flexible work schedule.
• Travel is required within the Asia Pacific region.
• Function in multicultural environments, collaborating with other professionals to prepare technical and commercial proposals and coordinate contract details as well as to respond to unique project conditions/demands.
• Deal with dynamic, fast paced, ever shifting conditions and challenges against competition and demanding customers.

Minimum Qualifications:

• Bachelor of Science degree in Mechanical, Electrical Engineering or equivalent, and at least three years of experience in related engineering assignments, preferably with turbomachinery applications.
• Must demonstrate general knowledge of turbomachinery principles and theory, mechanical and electrical engineering and applications related to our business.
• Knowledge of Solar’s policies, products and processes, and a familiarity with Solar’s markets and industry standards.
• Moderate Solar and/or marketplace experience is required, including the engineering and operation of the equipment along with potential impact to customers.
• Demonstrated cross functional leadership; in order to identify and secure resources necessary to prepare proposals, deliver on commitments
• Strong negotiation and influencing skills; Able to effectively influence a variety of business partners, peers and customers.
• Must demonstrate the ability to interface cross culturally as well as cross functionally.
• Self-driven, motivated, ability to work independently.
• High level of emotional intelligence
• Candidates must have a desire to move into a field sales position and demonstrate the basic capability to execute this career progression in the future.

Position Overview

Science Centre Singapore is dedicated to the promotion of interest, learning and creativity in science & technology through imaginative and enjoyable experiences, and to contribute to the nation's development of its human resource.

Join the Exhibitions team and create memorable experience as an Assistant Experience Engineer.

Essential Job Functions

As an Assistant Experience Engineer, you play a pivotal role in developing exhibits and experience, ensuring they operate at the highest level for the enjoyable experience for our guests. Your responsibilities include the following:

- Exhibit checks, reporting, troubleshooting and maintenance of exhibits/exhibitions

- Carry out periodic image back-ups of our exhibits, maintaining the exhibition network and administration of the team’s knowledge management database (storage FTP server)

- Set-up and takedown of Exhibitions

- Exhibit Ideation and Prototyping

- Work on Exhibit Specifications (including providing technical advice for development projects)

Requirements

Knowledge and work experience in the following areas will be an advantage.

Diploma in Industrial Design/Product Design

· Machining, mechanical assembly works, electrical and electronic systems, digital prototyping using CAD (computer-aided Design) software.

· Rapid prototyping, addictive and subtractive fabrication of spare parts and components for exhibits, exhibit housing and experiences.

· Operating woodworking machines such as, the bench saw, planer, routers and stand drill.

· Wood/plastics fabrication works

Diploma in Information Technology or equivalent

· Familiarity with troubleshooting basic computer hardware faults, diagnose software issues within an exhibit and resolve them

Other Skills/Abilities

Having a strong interest in taking apart or fixing things, coupled with the ability to handle basic equipment and tools useful in carrying out the duties within the galleries.

We value qualities such as professionalism, initiative, and quality service in all aspects of interaction with both internal and external customers, collaborative and enthusiastic about learning and acquiring new skills.

Shift Requirements

Rotating 5-day work shifts is a requirement, while duties on weekends and public holidays will be scheduled as and when required.

Only shortlisted candidates will be notified.

We are seeking a motivated Assistant Engineer (Sales & Marketing Support) to join our dynamic team! This role will serve as a bridge between our engineering, sales, and marketing teams, ensuring seamless communication and support. The ideal candidate will bring a combination of technical expertise and customer-oriented skills to assist in delivering exceptional service to our clients.

Job Scope:

Technical Support for Sales Team:

• Provide technical assistance and product knowledge to the sales team during customer meetings, presentations, and calls.
• Prepare technical documentation, product specifications, and comparison reports for sales presentations.

Customer Interaction & Troubleshooting:

• Assist in addressing technical inquiries from clients and help troubleshoot product-related issues.
• Participate in customer meetings to explain technical aspects of UF membranes and their applications.

Project Support:

• Collaborate with the sales team to support technical aspects of client projects, including sizing and selecting appropriate UF membrane products for specific applications.
• Monitor project timelines and provide updates to the sales team to ensure smooth coordination with customers.

Market Research & Product Development Input:

• Conduct market research to understand customer needs, competitor products, and industry trends.
• Provide feedback to the R&D and production teams regarding potential improvements or modifications to the UF membrane products based on customer feedback and market demand.

Training & Product Demonstrations:

• Organize and conduct product training sessions for the sales team, distributors, and customers.
• Assist in product demonstrations and pilot installations for potential clients to showcase membrane performance.

Documentation & Reporting:

• Maintain detailed documentation of customer interactions, technical issues, and solutions provided.
• Prepare regular reports on customer feedback, product performance, and sales support activities.

Collaboration with Marketing Team:

• Work closely with the marketing team to develop technical content for brochures, presentations, and marketing materials.
• Assist in planning and executing marketing events, such as exhibitions, webinars, and customer workshops.

Qualifications:

Educational Background:

• Bachelor’s degree in Engineering (Chemical, Environmental, Mechanical, or related field).
• Knowledge of water treatment or membrane technology is a plus.

Technical Knowledge:

• Ability to read technical drawings and understand product specifications.
• Familiar with AutoCAD or Solidworks
• Programming and Data analysis will be a plus

Communication Skills:

• Strong verbal and written communication skills.
• Ability to explain technical concepts to non-technical audiences and prepare technical reports.

Problem-Solving & Collaboration:

• Good analytical skills to troubleshoot and address customer needs.
• Team player with the ability to work across different departments.

Responsibilities:

• Work closely with customer and internal team during new product introduction to deliver design project
• Coordinate with factory to ensure timely delivery of prototypes during sample builds
• Facilitate DFM activities during development to ensure product is manufacturable
• BOM creation and Maintenance in SAP system (Part addition, BOM Upload, BOM Change)
• Handover of project to factory for mass production

Requirements:

• At least 3 years of working experience in electronics manufacturing environment
• At least a Bachelor’s degree in Engineering
• Good understanding of electronics manufacturing process
• Experience in project / product management
• Fluent in verbal and written communication

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

* Inspects, maintains and repairs various types and brand of air conditioner system, including split units, window and casement units.

* Performs regular preventive maintenance and corrective works on air conditioning system.

* Diagnoses electrical and mechanical defects and malfunctions.

* Carries out repair works such as replacement of air con compressor, fan coil motors etc.

* Any other tasks, when required by the immediate supervisor.

* To carry out air conditioner maintenance, servicing and repair works

•Troubleshoot error code and malfunctions of air-conditioning system

•Ensure all works are carried out safely with safety procedures

Requirements:

Minimum 10 years of Aircon engineering supervisory experience

Education not much required, But Preferred overseas experience.

Education is not necessary. Must practically Aircon experience.

Must able to work as a Engineer

Willing to work on rotating shifts,

Able to do hardworking,

Willing to work weekend and public holiday when required.

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with resource planning and budget milestones.
• Perform site study for PV system recommendations.
• Manage site team for safety compliance.
• Monitor project progress for specification, schedule, and budget alignment.
• Plan and prepare Bill of Materials (BOM).
• Coordinate with procurement for timely material delivery.
• Create checklists for solar project inspections.
• Investigate and troubleshoot M&E issues with stakeholders.
• Assist LEW with site testing and inspections.
• Design electrical and mechanical drawings using AutoCAD.
• Requirements:.ubmit project documents for authorities.

Requirements:

• Diploma in Mechanica/Electrical Engineering, or equivalents.
• Knowledge of AutoCAD, Solidworks, or modeling software (e.g., SketchUp, PVsyst, Helioscope) is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Roles & Responsibilities:

• Understand the Quality, Environment, Water Efficiency and Occupational Health & Safety Policy and Objectives including the environmental aspects and impacts, Safety risk assessment, etc
• Ensure the effectiveness of Quality & Environment Management System across the department and compliance with the legal & regulation.
• Conduct periodic solution analysis and replenishment.
• Troubleshooting on process issues and provide technical reports.
• Identify, evaluate, review aspects & impacts of the risk hazards for existing & new processes & activities.
• Report any quality, environmental, water efficiency, and safety to the relevant internal authority.
• To liaise with customer regarding production issues/ projects.
• To establish & review periodically the work instructions, process parameters standards (PMP) and FMEA.
• Any other ad hoc duties as assigned by superior.

Requirements:

• Degree in Chemical Engineering or related discipline.
• Having 4 - 5 years' relevant work experience in electroplating / semiconductor field.
• Knowledge and experience in Wafer Plating is essential.
• Independent and self-driven individual.
• A team player with good interpersonal skills.

Working hours:

Normal Shift (5 days work week)

7.50am to 4.55pm

Benefits:

• Company transport provided at designated pick-up points islandwide
• Medical insurance coverage
• In-house canteen at subsidized price
• Employee Flexible benefits Scheme

Position & remuneration package will be commensurate depending on candidate’s suitability and experiences.

Please visit our corporate website for more information on Seiko Epson Corporation.

• Salary: $3500 - $5000 (basic), travelling allowances
• Overtime claimable, Performance bonus
• Degree holders with no experience can apply
• On-the-job training is provided
• Good working environment
• Career advancement

Main purpose of the job

To perform repair, inspect and commission Company’s System (cranes, drilling systems, pipe-lay systems etc.) at the client’s premises or at the Company under supervision of an experienced service engineer

Responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1 year of relevant experience as Service Engineer in Oil & Gas/Marine industry
• Candidates with no experience can apply as on-the-job training is provided
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily and work overtime
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your resume to [email protected]

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical & Electronic or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

Roles & Responsibilities:

• Understand the Quality, Environment, Water Efficiency and Occupational Health & Safety Policy and Objectives including the environmental aspects and impacts, Safety risk assessment, etc
• Ensure the effectiveness of Quality & Environment Management System across the department and compliance with the legal & regulation.
• Conduct periodic solution analysis and replenishment.
• Troubleshooting on process issues and provide technical reports.
• Identify, evaluate, review aspects & impacts of the risk hazards for existing & new processes & activities.
• Report any quality, environmental, water efficiency, and safety to the relevant internal authority.
• To liaise with customer regarding production issues/ projects.
• To establish & review periodically the work instructions, process parameters standards (PMP) and FMEA.
• Any other ad hoc duties as assigned by superior.

Requirements:

• Degree in Chemical Engineering or related discipline.
• Having relevant work experience in electroplating / semiconductor field.
• Knowledge and experience in Wafer Plating is essential.
• Independent and self-driven individual.
• A team player with good interpersonal skills.

Working hours:

Normal Shift (5 days work week)

7.50am to 4.55pm

Benefits:

• Company transport provided at designated pick-up points islandwide
• Medical insurance coverage
• In-house canteen at subsidized price
• Employee Flexible benefits Scheme

Position & remuneration package will be commensurate depending on candidate’s suitability and experiences.

Please visit our corporate website for more information on Seiko Epson Corporation.

Sobono Group Profile

Sobono Group is a leading energy solutions provider in the Asia Pacific region, committed to sustainability and innovation. We are developing the RExus Waste Wood to Energy (WWtE) Plant and, in parallel, other renewable energy plants regionally.

Job Position – Electrical & Instrumentation Control (E&IC) Engineer

The Electrical Engineer will play a critical and challenging role in the design, engineering, and construction of the electrical systems for the RExus WWtE Plant. This position will be responsible for overseeing all electrical engineering aspects of the project, ensuring compliance with industry standards and project specifications.

Key Responsibilities:

· Develop, execute, and manage capex projects according to company guidelines, meeting operational, technical, commercial, and HSEQ standards.

· Develop and review electrical design drawings, schematics, and specifications.

· Coordinate with other engineering disciplines (mechanical, civil, instrumentation, and control) to ensure seamless integration of electrical systems.

• Prepare detailed electrical equipment and system specifications.

· Interpret and implement project technical specifications, attend meetings for technical clarifications, and facilitate identifying and mitigating engineering risks.

· Review and approve vendor documentation, including equipment data sheets and technical specifications.

• Oversee the procurement and installation of electrical equipment.
• Perform site inspections and commissioning activities.
• Ensure compliance with relevant electrical codes, standards, and regulations.
• Troubleshoot electrical issues and implement corrective actions.
• Prepare technical reports and documentation.
• Coordinate with the project team to ensure timely completion of electrical work.

Qualifications:

• Bachelor's degree in Electrical Engineering or related field.
• Minimum of 3 years of experience in electrical engineering, preferably in the power plant or industrial sector.
• Strong knowledge of electrical design principles, standards, and regulations.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, ETAP).
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.

Preferred Qualifications:

• Knowledge of power plant control systems and automation.
• Experience in project management.

Job Description:

• Drive PGCS Quality programs and policies compliance across site, by partnership with functional stakeholders.
• Key contributor/promoter to the advancement of Quality function across the sites; creating and driving critical/key business objectives in line with supporting/partnering with Operations, Supply Chain functions etc.
• Lead incident management and resolution and champion customer quality across Singapore. Site lead for Quality and Food safety crisis mgmt.
• Lead the implementation of the Singapore Quality Strategy including communication, project management and roll out activities.
• Lead continuous improvement culture/productivity initiatives to support site BPI process, demonstrating best practices to implement all quality improvements
• Drive, support and champion KPIs, key Quality metrics, etc.
• Act as a business partner to other functions whilst championing Quality, to ensure an extended and consistent quality focus.
• Be a key member of the Site Leadership team and value add in driving functional and site agenda.
• Support and provide strategic guidance around NPIs, validation, Total Quality System, Compliance, Capital investment, etc.
• Partnership with other functions ensuring change control risk assessment and validation in place for Network capacity projects and other key projects and significant changes.
• Financial Management; Budgetary and AOP responsibilities/input.
• Compliance; drive partnership with other functions through the Quality team to achieve key business goals for the control environment. Compliance with all regulations and 3rd party auditing requirements.
• Provide strategic quality leadership to the extended Quality Team
• Organisation design & sustainability of a highly effective team with appropriate succession plan. Encourage, manage & promote people-related activities/processes, partnering with HR
• Develop capability, personal growth and career development for direct reports, support these activities with DRs’ associated teams.
• Play in instrumental role in developing the overall team capability, supporting and aligning with overall plant culture.
• Ensure the smooth transition of new products to the Singapore facilities.
• Manage the complexity of additional materials, packaging and concentrate components from a quality perspective as portfolio expands
• Support and implement PGCSSC global quality initiatives
• Systems improvements (including IT systems) in terms of Processing, GMP, Product Safety, Disposition and Traceability.
• A requirement of the role is that you must adhere to all PepsiCo Health & Safety requirements.

Qualifications :

• Bachelor’s Degree in Science, Food Technology, Chemistry or any other related discipline
• Minimum 7 years of relevant experience as a supervisor in operating Laboratory environment, manufacturing concern/MNC
• Ability to manage senior stakeholders and leadership team members
• Experience in People Management and prior supervisory skill
• Possess knowledge of and experience in GLP, HPLC / GC operation, SAP QM module and LIMS management
• Strong leadership presence, ability to manage and co-ordinate with cross-functional teams on investigation analysis, troubleshooting and issues resolution
• Knowledge of food safety quality standards such as HACCP and FSSC 22000
• Ability to lead change and drive behaviours
• Ability to organize and manage multiple priorities in high-pressure work environment
• Strong collaboration and influencing skills
• Excellent communication and interpersonal skills, both verbal and written with ability to clearly articulate ideas and proposals to all levels of the organization
• Positive and Can-do Attitude
• Willing to stretch and take additional responsibilities when needed
• Lead by example to others

Kindly note that this is a short-term role based in Singapore.

• To Project Management Coordinate with main-con & consultant for drawing submission, material sample submission & meeting with main-con and consultant.
• Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptacle layout, single line diagrams, CCTV, data Tel com operational routing diagram, and ELV systems. control schematic and wiring diagrams.
• Identify discrepancies in tender/contract / IFC drawings and raise queries for clarification, A&A (R&R) + Constriction Filed.
• Attend all operational matters related to the daily running of the project & Handle multiple projects simultaneously.
• Testing & commissioning for Electrical apparatus.
• QA/QC documentation review of engineering deliverables.
• LV & HV cables sizing calculation & prepare bill of material.
• Planning workforce arrangement & supervision & working planning.
• Giving progress reports regularly to teams & monitor project schedules.
• Prepare Electrical shop & As-builts SLD Rcp drawing

Job Responsibilities

1. System Design and Development

• Design motion control systems, including hardware and software components.
• Develop and test control algorithms for precision motion systems.
• Create detailed design specifications and documentation.

2. Component Selection and Integration

• Select appropriate sensors, actuators, motors, and controllers for the motion control system.
• Integrate components to ensure seamless operation and optimal performance.
• Work with suppliers and vendors to source high-quality components.

3. Simulation and Testing

• Conduct simulations to predict system behavior and validate design choices.
• Develop and implement testing protocols to evaluate system performance.
• Troubleshoot and resolve issues identified during testing.

4. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers.
• Communicate design concepts and progress to stakeholders.
• Collaborate with manufacturing teams to ensure designs are feasible and cost-effective.

5. Optimization and Improvement

• Continuously improve motion control systems for better efficiency, accuracy, and reliability.
• Stay updated with the latest advancements in motion control technology.
• Implement feedback from field tests and customer use to refine system designs.

6. Project Management

• Manage project timelines, budgets, and resources.
• Ensure projects meet deadlines and quality standards.
• Coordinate with project managers and other engineers to align with project goals.

Required Skills and Qualifications

1. Technical Skills

• Proficiency in motion control technologies and principles.
• Experience with CAD software for designing mechanical and electrical components.
• Knowledge of programming languages (e.g., C/C++, MATLAB, Python) for developing control algorithms.
• Familiarity with PLCs (Programmable Logic Controllers) and HMI (Human-Machine Interface) systems.

2. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot complex motion control issues.

3. Education and Experience

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Robotics, or a related field.
• Relevant experience in designing and implementing motion control systems.

4. Soft Skills

• Excellent communication and teamwork skills.
• Strong organizational and project management abilities.
• Attention to detail and a commitment to producing high-quality work.

Additional Responsibilities

• Compliance and Safety

• Ensure all designs comply with industry standards and safety regulations.
• Conduct risk assessments and implement safety measures in system designs.

• Innovation and Research

• Engage in research and development to explore new motion control technologies.
• Innovate and propose new solutions to enhance system performance and capabilities.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.