Possess a diploma/ degree in Electrical/ Electronics/ Engineering or equivalent.

Fresh or soon to graduate applicants are also welcomed.

Experience in Microsoft Visual Studio.

Competent in C#, C, C++, Visual Basic.

Knowledge in compiling/gerating EXE file.

Prepare detailed electrical drawings and engineering documentation.

Work closely with customers on their requirements and be part of the software development life cycle (SDLC).

Review and enhance software features and updates.

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Essential Responsibilities:

As a layout and circuit Failure Analysis Engineer your responsibilities include:

• Digital / Analog design and layout analysis
• Simulation and debug on circuit design
• Studying and being proficient in PDK (process design kit), tech files and other design collaterals for advanced technology nodes
• Working closely with product engineers and failure analysis team to investigate and resolve yield issues through Circuit/Layout Design Diagnosis
• Evaluating and enhancing the capabilities of Circuit/Layout Design diagnosis

Requirements

• Bachelor/Master’s in Electric Engineering (Preferred specialization in design).
• Familiar with Circuit Design and Layout related EDA tools (Virtuoso, Calibre, Layout editor, Avalon, Lavis, etc).
• Familiar with Electrical parameters, IC testing, Fault diagnosis/Failure analysis techniques.
• Semiconductor processing knowledge/experience/understanding are preferred.
• Excellent data analysis and problem-solving skills.
• Strong interpersonal skills and ability to work effectively within a cross functional team environment.

• Report to Precast yard Manager
• Responsible for All Precast segments casting work
• Responsible Precast Mould Assembly
• Profiling of Precast Segment Rebar and Post Tensioning Duct
• Preparation of Pre and Post Tensioning Calculation
• Ensure the quality of work as per the approved standard
• Assure that work is done according to safety work practices
• Post Tensioning Duct Layout and Profile works
• Coordinate with site Engineer and supervisor
• Assist with Senior Engineer and attend internal meetings

Job Requirements:

• Degree in Civil Engineering or equivalent
• At least 2 years of experience in civil engineering projects, inclusive of relevant experience in precast yard or fabrication yard
• Experienced in the fabrication of segmental box girder for viaduct, precast mould assembly & repair, and/or similar projects is preferred
• Knowledgeable on the applicable standards for the casting works
• Location :Woodlands
• Project : Viaducts

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Mechanical) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): costing, quotations, RFI, Engineering, negotiation, claims, procurement, liaison with clients, liaison with contractors, field engineering
• Preferably Junior Executive specialized in Engineering - Oil/Gas or equivalent. The individual would be required to do site-visit and prepare project costing.
• Regular and timely follow-up with clients to support Request-for-Tenders.
• To smoothly manage a response to 'Request for Tenders' (RFT) or 'Request for Proposals' (RFP) issued by existing or prospective clients.
• This is a key role in the organization. You would require to coordinate with other departments to consolidate the tender submission.
• The parties will include our sub-contractors or joint partners. You are to warrant completeness in submission and put forward the best possible response which will demonstrate value-creation in our tender.
• You will need to assure all deadlines are met as well as manage the graphic design and visual presentation of both hard copy and digital version.
• Close follow-up and strong customer service attitude to handle commercial negotiation

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

The School of Mechanical & Aerospace Engineering (MAE) invites applications for the position of Research Engineer I/Research Engineer II.

The Research Engineer will carry out research project for industrial robot controller and applications with open source environment ROS2

Key Responsibilities:

• Responsible for developing ROS2 controller application & AI software for industrial requirements.
• Responsible for promotion to and coordination with industry partners both locally and internationally
• Assisting the team for robot system integration with ROS2 controller

Job Requirements:

• Bachelor/Master in Robotics from Mechanical Engineering / Electrical Engineering / Computer Engineering
• Familiar with industrial manipulator modeling, control, or AI techniques for robotics
• Good hands-on experience on industrial robot programming
• Familiar with C/C++, ROS, Linux OS, Windows OS, and other similar libraries and software tools
• Good robot system integration experiences

We regret that only shortlisted candidates will be notified

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. The position is for one year, renewable subject to satisfactory performance. Successful candidates will be involved in a project that is related to 3D Environment Modelling.

Key Responsibilities:

• Create immersive 3D environments and VR
• Translate 2D designs into 3D spaces
• Optimize environments for performance and aesthetics
• Design and texture object models independently

Job Requirements:

• Bachelor’s degree or above in relevant disciplines
• Proficient in Unity, Unreal Engine, Blender, and Cinema 4D
• Strong portfolio with diverse environmental models with a robust understanding of complex scene spatial and proportional relationships
• Knowledge of procedural generation and optimization techniques
• Preferably to have experiences as the lighting specialist to achieve cohesive and compelling environments

We regret that only shortlisted candidates will be notified.

Responsibilities

- Perform repair, troubleshooting and commissioning of Caterpillar engines/

machines / equipment.

- Coordinate and communicate with customer.

- Develop strategies to improve quality of technical support, and to improve service.

- Review set up for technical support with principals

Requirements

- Diploma in Marine / Mechanical Engineering / Mechatronics

- 2-3 years working experience in the construction/marine or mechanical handling

equipment industry or 5 years experience with Industrial Technician Certificate

- Ability to organise and lead with plenty of drive and initiative

- Shipyard working experience / sea going experience will be an advantage.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Responsibilities

· Responsible for providing preventive maintenance service for BMS (Building Management System)

· Carry out troubling shooting, analyzing and rectification of the system on time

· Support client with system operation and recommendation for improvement

· Data analyzing and determination of the system operation status

· Response client’s request and attend the issue in short notice

· Supervise subcontractor to carry out the work safely

· Provide the assistance to colleague and mentoring actively

· Ensure all works carried out in accordance with the specified quality and EHS standards

· Prepare and submit quotations, including material, labor, and scope of works

· Perform replacement/repair, fit out works/A&A for existing BMS site

· Perform weekly standby on rotation schedule

· Perform calibration and verification of BMS sensors annually

· Provide sales support BMS service and site survey

Requirements

· Diploma/ Degree from a recognized technical institute

· Hands on experience in BMS Control System

· Hands on experience in programming languages and logic gates

· Familiar with digital fundamental

· Knowledge on basic networking

· Strong customer management & problem solving skills

· Excellent communication & presentation skills

· Skilled in the use of MS office

· Knowledge on ACMV system

Meet Ship Superintend at ongoing vessel at Anchorage or PSA, inspect

refrigeration, accommodation air-conditioner systems, package type air-

conditioner, split type air-conditioners.

Repair the equipment as per customer’s requirement or services or retrofit,upgrade the entire system.

Supply brand new refrigeration and air-conditioning compressor or re-

conditioned compressors as per buyer requirement.

Supply, install package type air-conditioners, split type air-conditioners.

Supply refrigeration & accommodation air-conditioner compressor parts,

lubrication oil and refrigerant.

Responsibilities:

• Prepare Engineering Document (Technical Specification, Calculation, drawings, etc) inthe development of new designs and products.
• Generate new drawings and drawing changes including parts lists and Change Orders.
• Perform impact analysis on the arrangement and drawings.
• Plan and organise relevant design changes in cooperation with Ship Design Authority.
• Study/analyse/investigate/develop the design. Prepare technical documentation/guidelines for the work to be performed, according to established formats from the technicaldatabase, stipulated budget, time schedule and quality standards.
• Conduct Testing and validate technical interfaces for the work performed, according toestablished test procedures from the technical database.
• Liaise with ship-owners and Ship Design Authority to obtain approval on engineeringdeliverables.
• Manage the design schedule and ensure that design is carried out according to contractand regulations.

Requirements:

• At least a Bachelor’s Degree in Mechanical/Marine Engineering.
• At least 1-2 years experience in engineering design and/or Classifications Societies and/orNaval Engineering Officer.
• Strong knowledge of international design codes, Classification/Statutory Rules andRegulations.
• Keep abreast with Naval Classifications Rules, Military and Industrial Standards relevantto design activities.
• Engineering Design Project Management skills.
• Strong Leadership and Interpersonal skills.
• Software knowledge of AutoCAD
• Only Singapore Citizens will be considered for this position

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

· Be part of a team in the implementation of Nationwide Mobile Network

· Preparation of proposals and documentation according to project standards

· Conduct site works, such as survey, site meetings, site handover

· Perform Commissioning and Integration of communication equipment

· Perform maintenance of equipment

· Competent to carry out troubleshooting with on-job training

· Coordinate with installation teams on site requirements and progress

· Update of site status

· Ensure Compliance with workplace safety, health and other regulatory requirements

Requirements

• Diploma in Electronics/ Mechatronics/ Electrical/ Communication Engineering or related discipline.
• Cad Software knowledge is an added advantage.

Job Description

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

·

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

Job Descriptions:

• Manage the daily preparation and production operations.
• Ensure that all activities conform to SAF guidelines.
• Responsible for the quality of all food items prepared in the production kitchen is as per company’s standard Operating Procedures (SOP) and according to recipes.
• Produce or directly supervise the cooking of production items that require skill sets.
• Ensure that both the preparation kitchen and production kitchen are staffed adequately for maximum productivity.
• Ensure that all required food ingredients are ordered, stocked, and properly stored.
• Must comply with SFA Food Hygiene standard and Factory cleanliness are always maintained.
• Maintain inventory of production equipment and communicate any concerns or needs.
• Ensure quality control by checking our products during production & delivery.
• Any ad-hoc duties will be assigned as needed.

Job Requirements:

• Relevant experience in kitchen or factory environment is preferred.
• Candidates are required to handle heavy item and able to daily carry 10-25 kg products.

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection Eligibility Criteria
• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Mandatory Skills

Key Responsibilities

· Creating complex, enterprise-transforming applications on diverse, high energy teams

· Working with the latest tools and techniques

· Hands-on coding, usually in a pair programming environment

· Working in highly collaborative teams and building quality code

· The candidate must exhibit a good understanding of model implementation, data structures,

data manipulation, distributed processing, application development, and automation.

· The candidate must have a good understanding of consumer financial products,

data systems and data environments, and processes that are necessary for the

implementation of Risk and Finance models

Essential Skills & Prerequisites

· Degree in computer science or a numerate subject (e.g. engineering, sciences, or mathematics)

or Bachelor's/Master degree with 6 years of experience

· Hand-on Development experience with PySpark, Scala Spark and Distributed computing.

· Development and implementation experience of applications for 4-6 years.

· 4 to 6 years' experience designing and developing in Python.

· 4 to 6 years' experience in Hadoop Platform (Hive, HDFS and Spark)

· 3 to 5 years' experience with Unix shell scripting

· 3 to 5 years' experience with SQL

· 2 to 3 years' experience with Spark programming.

· Knowledge of micro-services architecture and cloud will be added advantage.

· Knowledge of Java and Scala will be added advantage

Desired

· A Bachelor’s degree or higher preferably in Computer Science or IT

· Additional experience on developing service-based application

· Excellent analytical skills: Proficient in MS Office and able to produce board-level

documentation

· Fluency in written and spoken English; Good communication and interpersonal skills

· Self-starter who sets and meets challenging personal targets, Detailed person, with a big

picture outlook

· Understanding of current technologies employed by Tier 1 Investment Banking Institutions

· Must be a team player

Mandatory Skills

· Hand-on Development experience with PySpark, ScalaSpark and Distributed computing.

· Development and implementation experience of applications for 4-6 years.

· 4 to 6 years' experience designing and developing in Python.

· 4 to 6 years' experience in Hadoop Platform (Hive, HDFS and Spark)

· 3 to 5 years' experience with Unix shell scripting

· 3 to 5 years' experience with SQL

· 2 to 3 years' experience with Spark programming

Mandatory Skills

Key Responsibilities

· Creating complex, enterprise-transforming applications on diverse, high energy teams

· Working with the latest tools and techniques

· Hands-on coding, usually in a pair programming environment

· Working in highly collaborative teams and building quality code

· The candidate must exhibit a good understanding of model implementation, data structures,

data manipulation, distributed processing, application development, and automation.

· The candidate must have a good understanding of consumer financial products,

data systems and data environments, and processes that are necessary for the

implementation of Risk and Finance models

Essential Skills & Prerequisites

· Degree in computer science or a numerate subject (e.g. engineering, sciences, or mathematics)

or Bachelor's/Master degree with 6 years of experience

· Hand-on Development experience with PySpark, Scala Spark and Distributed computing.

· Development and implementation experience of applications for 4-6 years.

· 4 to 6 years' experience designing and developing in Python.

· 4 to 6 years' experience in Hadoop Platform (Hive, HDFS and Spark)

· 3 to 5 years' experience with Unix shell scripting

· 3 to 5 years' experience with SQL

· 2 to 3 years' experience with Spark programming.

· Knowledge of micro-services architecture and cloud will be added advantage.

· Knowledge of Java and Scala will be added advantage

Desired

· A Bachelor’s degree or higher preferably in Computer Science or IT

· Additional experience on developing service-based application

· Excellent analytical skills: Proficient in MS Office and able to produce board-level

documentation

· Fluency in written and spoken English; Good communication and interpersonal skills

· Self-starter who sets and meets challenging personal targets, Detailed person, with a big

picture outlook

· Understanding of current technologies employed by Tier 1 Investment Banking Institutions

· Must be a team player

Mandatory Skills

· Hand-on Development experience with PySpark, ScalaSpark and Distributed computing.

· Development and implementation experience of applications for 4-6 years.

· 4 to 6 years' experience designing and developing in Python.

· 4 to 6 years' experience in Hadoop Platform (Hive, HDFS and Spark)

· 3 to 5 years' experience with Unix shell scripting

· 3 to 5 years' experience with SQL

· 2 to 3 years' experience with Spark programming

• Carry out maintenance, diagnosis, and repair of electrical, automation, and instrumentation of equipment applied by industrial motor controls, chemical feed systems, pump drives, and the Supervisory Control and Data Acquisition (SCADA) system
• Perform maintenance, repair, and upgrade of the Water Supply Division’s electrical distribution infrastructure
• Carry out thermography of electrical distribution panels and motor control
• Troubleshoot problems by gathering and analyzing power quality data
• Ensure longer life of obsolete equipment and save funds by carrying out detailed troubleshooting down to component levels
• Perform maintenance, installation, repair, and troubleshooting of control centers, de-energized higher voltage equipment, and 480 volt motors
• Repair and maintain engine generators and carry out work on related control circuit equipment
• Carry out maintenance, repair, and installation of building circuits and similar equipment
• Perform maintenance of alarm and SCADA systems, electrical pneumatic and electronic controls, programmable controls, and other similar equipment
• Carry out necessary carpentry, welding, valve repair, cement, and pipe fitting work
• Prepare reports, maintain records, and requisition supplies and parts
• Inspect and supervise work done by external vendors.

Responsibilities:

· Responsible for day to day project supervision for new construction/conversion/repairs of vessels

· Ensure work assigned is carried out effectively and productively in order to meet customer specifications and requirements

· Deploy effective utilization of manpower and material resources in the department.

· Liaising with other departments on daily production schedule

· Assist in Planning of department manpower projections

· Assess and plan weekly manpower deployment and allocation of repair vessel to Sub-contractor

· Obtain and monitor drawings/ technical information

· Attend assigned project progress meeting/HAT meeting

· Assess staff work performance under his charge as required

· Identify training needs for his men

· Monitor job progress and man hours of the assigned project

· Study and evaluate the work processes and methods of the department and explore new ideas to improve work quality and productivity

· Liaise with owners’ representative and/or class surveyor during witness/inspection

· Highlight areas of need to other trades to clear their work (e.g. temporary lightings, staging, closing of access, etc.)

· Conduct RA assessment/ BBS observation/ hazard reporting

Requirements:

· Degree/Diploma in Electrical Engineering

· 2 -3 years relevant experience in Electrical operations in marine industry

· Knowledge of class requirements will be advantageous

· Knowledge of ship’s electrical system, control system and their classification requirements

· Able to interpret technical/electrical drawings and specification

· Possess man-management experience for workers and subcontractors

· Able to work on weekends and public holidays due to project’s requirements

· Able to work under outdoor conditions, including grease and dust

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Responsibilities:

• Work as part of a maintenance team ensuring fleet availability for client
• Manage planned maintenance activities
• Conduct troubleshooting of systems onboard vessels
• Supervise and guide workers in mainenance tasks
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task
• Any tasks as directed by Site Manager

Requirements:

• Diploma or NTC in Mechanical or Marine Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to communicate effectively with internal and external stakeholders
• Able to work during weekends and public holidays and on odd-hours
• Willing to work in Brani area, with company transport provided

Other Information:

• Official Work Hours: 7am - 5pm
• 5 Days Week
• Company Transport provided to Gul

JOB TASKS AND SPECIFICATION

1. Installing and configuring computer hardware, software, systems, networks, printers and scanners.
2. Monitoring and maintaining computer systems and networks.
3. responding to technical support calls from end users int a timely manner to service issues and requests.
4. Providing technical support across the company (this may be in person or over the phone).
5. Create and Modify user accounts in Windows Active Directory & Office 365.
6. Repairing and replacing equipment as necessary.
7. Testing new technologyPossibly training more junior staff members
8. Setting up and installing new computers, networks and software.
9. Installing updates, known as patches, firmware, to hardware and software applications.
10. Installing and configuring operating systems, anti-virus software and other applications such as Microsoft Office.
11. Diagnosing and fixing network problems and hardware or software faults.
12. Maintaining inventories of hardware and software.
13. Keeping a record of issues and faults along with solutions, for future reference.

JOB REQUIREMENTS

• Minimum Diploma /ITE or any Tertiary education related to IT.
• 3-5 years of proven experience in a heavy customer focus position involving and technical knowledge of a companies' products and services Knowledge on Data / Voice Networking is advantageous.
• Comfortable working and assisting others through company help desk software, such as service desk in addition to other remote access desktop programs.
• Extensive experience working with different operating systems including Windows and Linux.
• Time-management skills and the ability to establish reasonable and attainable deadlines for resolution.
• Ability to prioritize and manage several milestones and projects efficiently.
• Professional written and interpersonal skills are essential when communicating with customers and clients.
• Experience in installing and configuring computer systems and applications for a large company.
• Ability to accept constructive criticism and customer feedback regarding their experience with software or IT services.
• Possess effective communication skills.

Remuneration shall commensurate with relevant work experience.

Thank you for your interest in Y3 Technologies.

We regret that only shortlisted candidates shall be notified.

Responsibilities

• Lead project planning and coordination efforts to ensure the efficient execution of projects.
• Contribute to the design process by providing technical input and expertise.
• Conceive engineering designs and solutions that align with project objectives.
• Create and maintain project documentation to ensure accurate records.
• Oversee key Factory Acceptance Testing (FAT), on-site services, testing & commissioning to ensure compliance with quality standards.
• Verify that products or systems meet specified requirements prior to deployment.
• Manage project warranty issues to ensure prompt warranty repair and service.
• Monitor project timelines & deliverables and ensure that they are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Furnish routine project progress reports to relevant stakeholders.
• Collaborate with service engineers to plan and arrange necessary resources for project site execution.
• Address incoming project queries from customers professionally and efficiently.
• Generate project bill-of-materials (BOM) and work with the sales team to procure project integration parts.

Requirements

• Engineering Degree, preferably electrical or mechanical
• Preferably 2 to 3 years of work experience.
• Excellent communication and interpersonal skills
• Robust and professional work ethics
• Able to work independently.
• Good team player

Join Us:

• Close-knit team with a warm and friendly working environment
• A rewarding and exciting career with excellent progression and employment benefits
• Flexible work hours (2-hour shift start/end flexibility)
• AWS, Company, Mid and End-Year variable performance bonus

Provide technical support for telecommunication projects:

· Conduct field survey to gather information for system design & planning.

· Design & generate technical proposal document.

· Conduct field test and data collection for performance analysis.

· Compile & analyze measurement data to generate test reports & acceptance document.

Requirements:

· Candidate must possess at least Diploma in Engineering (Computer/Telecommunication) or equivalent.

· No work experience required, On-Job Training provided.

· Required Skill(s): CAD, Microsoft Office, ibwave, mobile test tools

· Preferably Entry Level specialized in Engineering - Electronics/Communication or equivalent.