• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

ROLE:
A*STAR-IME is leading the way in establishing industry first 200mm open Silicon Carbide (SiC) R&D program. The program specific focus is on advancing 200mm SiC technologies in key areas such as epitaxy, gate stack, ion implantation, and dry etching, and integrating these modules to fabricate high-performance power devices. Our objective is to drive innovation in power device research, particularly in power MOSFETs rated above 1.2KV. Developing key innovative process is crucial for creating high-performance devices that will contribute to advancements in automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. This role involve growing leadership into ion implantation processes for p-body, channel, guard ring, source contact, and other components. We are currently seeking such individual with ~5 years of experience in ion implantation. The chosen candidate will be responsible for independently supervising ion implantation processes, conducting ion implant simulations, possessing knowledge of crystallography and ion interaction with atoms, having strong understanding of implanters and related thermal processing physics, beam optics, dosimetry systems, and vacuum technology. The ideal candidate should also be willing to collaborate with various departments, the technology development group, and customers. Furthermore, the candidate will contribute to the wide-bandgap team by sharing the ion implantation expertise on compound semiconductor materials and collaborate with other departments working with Si-based technology. The candidate will also be groomed to lead this diffusion process module group of ~6 headcounts into the future.

RESPONSIBILITIES:

• Diagnose malfunctions and using test equipment & software to test faulty tool; applying knowledge of the functional operation of the ion implant equipment

• Support on-site ion implanters in creating, running & characterizing recipes for recipe validation and develop process to achieve the desired dopant profile with excellent
damage recovery.

• Collaborate with vendors to optimize equipment performance and reduce tool downtime

• Analyze data related to implant-related defects formation with quantification and defects minimizations strategy

• Examine work-orders and communicates with equipment operators to resolve equipment problems & determine mechanical and human errors contributed to the issues

• Perform scheduled preventive maintenance tasks with tool operators, especially in checking, cleaning, repairing, detecting and preventing problems

• Responsible for designing experiments for ion implantation at various dose, energy, tilt, and twist levels

REQUIREMENTS:

• Ms/PhD Degree in Electrical Engineering or related field

• >3-5 years industrial experience for high power device design and modeling

• Extensive proficiency in medium to high energy/current ion implantation processes, including a comprehensive knowledge of implant equipment, equipment parts, and
troubleshooting techniques to minimize equipment downtime

• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species

• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile

• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors

• Familiarity with essential device properties resulting from ion implantation

• Adept at mentoring and transferring knowledge to junior staff members

As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

ROLE:
A*STAR-IME is leading the way in establishing industry first 200mm open Silicon Carbide (SiC) R&D program. The program specific focus is on advancing 200mm SiC technologies in key areas such as epitaxy, gate stack, ion implantation, and dry etching, and integrating these modules to fabricate high-performance power devices. Our objective is to drive innovation in power device research, particularly in power MOSFETs rated above 1.2KV. Developing key innovative process is crucial for creating high-performance devices that will contribute to advancements in automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. This role involve growing leadership into ion implantation processes for p-body, channel, guard ring, source contact, and other components. We are currently seeking such individual with ~5 years of experience in ion implantation. The chosen candidate will be responsible for independently supervising ion implantation processes, conducting ion implant simulations, possessing knowledge of crystallography and ion interaction with atoms, having strong understanding of implanters and related thermal processing physics, beam optics, dosimetry systems, and vacuum technology. The ideal candidate should also be willing to collaborate with various departments, the technology development group, and customers. Furthermore, the candidate will contribute to the wide-bandgap team by sharing the ion implantation expertise on compound semiconductor materials and collaborate with other departments working with Si-based technology. The candidate will also be groomed to lead this diffusion process module group of ~6 headcounts into the future.

RESPONSIBILITIES:

• Diagnose malfunctions and using test equipment & software to test faulty tool; applying knowledge of the functional operation of the ion implant equipment

• Support on-site ion implanters in creating, running & characterizing recipes for recipe validation and develop process to achieve the desired dopant profile with excellent
damage recovery.

• Collaborate with vendors to optimize equipment performance and reduce tool downtime

• Analyze data related to implant-related defects formation with quantification and defects minimizations strategy

• Examine work-orders and communicates with equipment operators to resolve equipment problems & determine mechanical and human errors contributed to the issues

• Perform scheduled preventive maintenance tasks with tool operators, especially in checking, cleaning, repairing, detecting and preventing problems

• Responsible for designing experiments for ion implantation at various dose, energy, tilt, and twist levels

REQUIREMENTS:

• Ms/PhD Degree in Electrical Engineering or related field

• >3-5 years industrial experience for high power device design and modeling

• Extensive proficiency in medium to high energy/current ion implantation processes, including a comprehensive knowledge of implant equipment, equipment parts, and
troubleshooting techniques to minimize equipment downtime

• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species

• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile

• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors

• Familiarity with essential device properties resulting from ion implantation

• Adept at mentoring and transferring knowledge to junior staff members

Overview

NUHS Regional Health System Office is at the forefront of transforming the healthcare landscape, shifting care from hospital to community. We are passionate about improving population health in the western region, and are looking for innovative talents like you to co-create with us.

You will play a vital role in supporting the planning and development of an integrated community care system. The role offers the opportunity to drive projects forward together with internal and external stakeholders, and contribute to improving population health.

Job Responsibilities

• Support community care planning and development, enhance integration of care and improve population health
• Supporting the monitoring and reporting of various workstreams within integrated community care system
• Supporting in project planning and management
• Support in stakeholder engagement and build partnerships
• Any other duties assigned by supervisors and HOD

Job Requirements

• Bachelor’s degree in any discipline
• Strong analytical abilities
• Project management skills
• Strong written and verbal communication abilities
• Adept in people skills to foster buy-in and collaboration
• At least 2 years of working experience
• Knowledge and experience in project management will be advantageous
• Experience in the Singapore healthcare system and/or knowledge of integrated care models will be advantageous

Roles and Responsibilities:

• TCAD modeling, simulation, and innovative design of high power electronics devices, as well as device characterization.
• Develop and simulate high power SiC MOSFETs (planar, trench, Super-Junction MOSFET, IGBT) with a blocking voltage exceeding 1.2K using the industry-standard Synopsys/Silvaco simulator.
• Create and simulate practical & efficient junction terminations.
• Model transport and carrier scattering in devices operating under extreme ambient conditions.
• Serve as a valuable resource for colleagues with lesser TCAD power electronics experience and take lead in group projects with managing risks & resource requirements.
• Foster close collaborations with both internal and external customers to fully understand customer issues and requirements.

Job Requirements:

• PhD Degree in Electrical Engineering or related field.
• >2-3 years industrial experience for high power devices design and modeling.
• Thorough understanding of different types of high-voltage, high-power MOSFETs including Planar, Trench, Super-Junction MOSFETs, and IGBTs, with a focus on design and device characterizations.
• Hands-on skill in designing MOSFET/diode layouts.
• Excellent communication skills to effectively engage with customers, address their needs, resolve issues, and meet demands.

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Job Description:

• Develop epitaxial processes for selective and non-selective growth of Ge and SiGe layers on Si substrates.
• Improve baseline processes for high-quality SiGe and Ge epitaxy: control uniformity and thickness and minimize threading dislocation density.
• Design epitaxial structures and develop processes for Ge and SiGe photodetectors (PD) and electro-absorption modulators (EAM) devices, integrating Ge/SiGe devices into Silicon photonic circuits.
• Troubleshoot to maintain tool and process quality. Prepare Standard Operating Procedures (SOPs), Out-of-Control Plans, and other technical documentation to maintain processes and tools.
• Perform metrology and characterization of SiGe and Ge epilayers (e.g., dopant and thickness uniformity, surface roughness, crystal quality, stress, carrier lifetime, etc.).
• Correlate SiGe and Ge crystal defects (type and density) with device performance and yield, and with device processing conditions.
• Provide technical support for technology transfer and process release requirements.
• Prepare technical presentations and papers for meetings, conferences and journals.

Requirements:

• PhD degree in Materials Science and Engineering, Physics, Chemical Engineering, Chemistry, Microelectronics Engineering, or closely related fields are welcome to apply.
• Prior 3 to 5 years direct experience in SiGe/Ge epitaxy and materials characterization.
• Working knowledge and prior hands-on experience in Design of Experiments (DOE) methodologies, statistical root cause analysis, and problem-solving methods, is desired.
• Understanding of epitaxial system hardware is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, AFM, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

You will work in the Environmental Health Institute, and be a key member of the Facility & Safety Management Section, overseeing facility support and safety management across multiple locations (Biopolis,Techplace II and Van Kleef Centre). This role encompasses a wide range of infrastructure and built environment responsibilities, making it ideal for engineers looking to apply their expertise in a dynamic research setting.

This job might be for you if you possess the following qualities:

• Lead strategic planning and coordination for establishing and maintaining specialised laboratories, ensuring alignment with organisational objectives and timelines.
• Develop and manage comprehensive project budgets, oversee financial planning, cost control, and resource allocation for laboratory establishment and maintenance projects.
• Create detailed project plans for laboratory establishment and maintenance, including scope definition, objectives, timelines, and resource requirements.
• Conduct cost-benefit analyses for proposed projects and initiatives, ensuring efficient use of resources and alignment with budgetary constraints.
• Oversee the design, installation, and maintenance of critical infrastructure systems, with a focus on Air Conditioning and Mechanical Ventilation (ACMV), and specialised laboratory equipment.
• Manage building automation systems to enhance facility performance and user comfort.
• Implement and oversee quality assurance processes to ensure specialised laboratories meet stringent quality standards and regulatory requirements.
• Identify potential risks associated with laboratory operations and develop robust mitigation strategies for safe handling of hazardous materials.
• Develop and implement sustainability initiatives across facilities, integrating innovative engineering solutions to optimise building performance and energy efficiency.
• Monitor and report on environmental performance metrics, including energy consumption and waste generation.
• Facilitate effective communication with stakeholders, including researchers, consultants, contractors, equipment suppliers, and regulatory authorities.
• Participate in corporate projects and perform administrative tasks as assigned.

Job Requirements:

• Degree in Mechanical Engineering. Candidates with degrees in other engineering disciplines (e.g., Electrical, Civil, or Environmental Engineering) with relevant experience will also be considered.
• Experience in facility infrastructure management, particularly in specialised laboratory or research environments.
• Expertise in designing and managing ACMV systems, and other critical building systems.
• Strong background in project management, particularly in complex built environments.
• Thorough understanding of regulatory requirements for specialised laboratories, including safety protocols for handling hazardous biological and chemical materials.
• Experience with Government Procurement practices, including green procurement initiatives.
• Proficiency in building management systems and CAD software.
• Strong analytical and problem-solving skills to address complex infrastructure challenges.
• Passion for driving sustainability in scientific research environments.
• Knowledge of green building standards (e.g., Green Mark) and experience implementing energy-efficient solutions.
• Excellent interpersonal and communication skills.

Applicants will be updated on the status of their applications within 4 weeks of the closing date of this job posting.

To apply, please proceed to Careers@Gov at https://sggovterp.wd102.myworkdayjobs.com/PublicServiceCareers/job/NEA-BIOPOLIS-HELIOS/Senior-Engineer-Executive-Engineer--Facility---Safety-Management-Section-_JR-10000034932

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Candidate will be part of a dynamic team in NUS Yong Loo Lin School of Medicine, to organize, plan and execute curricular programs/initiatives across all medical years of the undergraduate program. He/she will also provide administrative, secretarial, and logistical support and guidance to the Education Committees and other stakeholders, to facilitate effective implementation of the curriculum.

Responsibilities

• Oversee all curricular-related matters for Phase III.
• Provide administrative support in the planning, preparation and delivery of medical curricular activities and subsequent new initiatives/programs.
• Work with departments and stakeholders to facilitate quality academic and clinical training at internal and external entities.
• Development, management, and coordination of Phase III clinical posting scheduling.
• Dissemination of up-to-date information or documents, when necessary, to internal and external stakeholders of the School.
• Manage curricular-related queries from internal and external stakeholders.
• Execute any other administrative duties that may be assigned for the delivery, review, evaluation, and improvement of the undergraduate medical curriculum.
• Provide secretariat support for the Phase Committee.
• Coordinate and administer implementation of curricular activities including new initiatives/programs.
• Communicate and disseminate curricular-related requests and information to internal and external stakeholders.
• Liaise with Office for Students and relevant stakeholders on student-related matters
• Collaborate with the case writers for the timely finalization of the case write-up.
• Assist with tutor recruitment, tutor content briefing, preparation of teaching materials, and operationalizing the planned teachings.
• Maintain lesson plans and learning materials on the School’s learning management System.
• Compute and upload the marks for Phase III CTS continual assessment component.
• Provide cross administrative support for all theory and clinical examinations.
• Assist in Education’s events such as Accreditation Exercise, Commencement Ceremonies, MedACE

Qualifications

• Minimum bachelor's degree in any discipline
• Knowledge of medical sciences or working experience in the health or events industry would be advantageous.
• Highly self-motivated individual who is mature, independent and adaptive
• Meticulous and detail-oriented
• Excellent project and time management skills
• Tact and discretion in handling sensitive information

Associate Medical Laboratory Technologists (AMLT) are responsible for the daily operations of the laboratory which include phlebotomy, electrocardiogram, spirometry and clinical laboratory work.

Responsibilities

• Perform daily operations of the laboratory
• Perform all procedures in accordance with laboratory standard operating procedures (SOPs)
• Perform phlebotomy, Electrocardiogram (ECG) and spirometry in an accurate, efficient and professional way.
• Perform Point of Care Testing (e.g. Prothrombin Time, glucose) and clinical laboratory tests such as urinalysis (e.g. Urine FEME, dipstick, pregnancy), haematology (e.g. full blood count, peripheral blood film, erythrocyte sedimentation rate, prothrombin time), biochemistry (e.g. HbA1c, neonate bilirubin), microscopy examination (e.g. fungal smear, high vaginal swab) independently.
• Ensure specimen identification, processing and storage of test specimens are in consistent with good laboratory practices
• Perform and verify quality control for all analysers prior to patients sampling
• Use of Laboratory Information System (LIS) to perform functions such as result entry, result validation and tracking for outstanding tests
• Ensure all test results provided for clinicians are accurate and reliable
• Ensure analysers/equipment are functioning properly and are well maintained.
• Notify medical technologist/lab in charge when instrument malfunction and make arrangements with BME or instrument vendor to service the instrument
• Notify inventory person in charge when reagents and stocks supplies run low.
• Perform and record internal and external quality controls and calibrations. Troubleshoot outliers in accordance to work instructions.
• Ensure ‘critical value’ are reported to the relevant personnel within 30 minutes
• Ensure daily maintenance and QC records are up to date.
• Ensure compliance to hand hygiene, workplace safety, International Patient Safety Goals (IPSG) and International Standardization of Organizations (ISO) and other applicable regulatory and accreditation requirements of the laboratory.
• Provide prompt and courteous service in person or over telecommunication to all external and internal customers (e.g patients, doctors, service providers, colleagues).
• Report adverse incidents and all workflow anomaly to supervisor
• Observe strict NUHS personal data protection act and observe internet/intranet cybersecurity guidelines.
• Perform other functions as delegated by supervisor and/or lead laboratory

Requirements

• Recognized Diploma in Biomedical Science, Clinical Laboratory Science or other relevant fields
• At least 1-3 years of experience in laboratory environment and/or relevant experience in phlebotomy preferred
• Good verbal and written communication skills
• Ability to communicate in vernacular languages are an added advantage
• Ability to multi-task and work in a fast-paced environment
• Team player with good interpersonal skills

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The incumbent will act as a key member for one of the most sought-after Master’s programmes at the NUS Faculty of Science. The dedicated person will work with the programme manager to ensure the smooth delivery of the self-financing programme and ensure its service standard. By working with the Programme Manager, Programme Director and the Deanery members at the Faculty of Science, he/she will contribute to the Programmes’ end-to-end administration including admission, programme management, alumni relations, and other related portfolios. Duties and responsibilities include, but are not limited to the following -

• Work closely with the Programme Manager, Programme Director and Dean’s Office for the overall administration of the Master’s programmes throughout the student lifecycle.
• Contribute to the daily management of the MSc programme, from programme administration, teaching matters, course registration, exams, to graduation.
• Help manage the programmes’ admission cycles by handling document verification, application enquiries, and assisting in the selection of candidates, to upkeep the programmes’ quality.
• Organize student activities such as orientation, workshop and gatherings.
• Undertake other administrative duties related to the Programmes/Centre for Data Science & Machine Learning if needed.

Qualifications/Requirements/Other Info

• Degree from a recognized university, postgraduate degree preferred
• Programme management experience, preferably 2+ years of experience as programme coordinator and partnership development in the higher education sector
• IT-savvy and proficient in MS Office
• Meticulous and possess good organizational skills
• Motivated, self-starter with ability to contribute to strategic planning, and perform duties independently

- Remuneration is based on a 12-month salary structure, with annual variable bonus which is subject to incumbent’s performance and the University/School’s prevailing remuneration policies.

- The incumbent will be emplaced at an appropriate appointment grade based on his/her individual merits.

Reporting to Centre-IC, Medical Technologist (MT) is responsible for the daily operations and administration of laboratory to ensure compliance to regulations and accreditation standards. This includes daily routine laboratory work, performing phlebotomy, electrocardiogram and spirometry. MT is responsible to maintain professional care to patients and works closely with NUP and other stakeholders.

Job scope

• Perform patient registration, specimen reception, preparation and packing of specimens
• Perform laboratory analysis (e.g. Urine microscopy, full blood count, HbA1c), operate and maintain instruments according to work instruction.
• Perform point-of-care testing, phlebotomy, ECG and spirometry procedures.
• Responsible to verify and report accurate results in timely fashion; investigates and reports any anomalies.
• Responsible to perform daily quality control check and troubleshoot as required.
• Ensure proper documentations and records for traceability (e.g. acknowledgement on QC and maintenance checklist after completion).
• Assist to resolve patient’s queries and escalate to centre-IC when necessary.
• Adhere to work safety guidelines and infection control protocols to ensure staff and patient safety.
• Assist centre-IC in tasks as assigned.

Qualification

Degree in Medical Laboratory/Biomedical Science or related fields.

Prior experience working at clinical laboratory at public or private healthcare establishment is advantageous but training will be provided

Experience in phlebotomy and heel prick sample collection will be advantageous but training will be provided

Effective communications and ability to converse in vernacular languages is an asset

Able to work in a fast-paced environment and with good problem solving skills

Possess positive attitude in resolving hostile and disgruntled patients professionally

Ability to multi-task and work under tight timelines

Good interpersonal relationship skills and enjoy working as a team

Computer literate – knowledge of MS Word, Excel and PowerPoint will be advantageous

Note : Candidates who are looking for Full Time/Part Time employment are welcome to submit the job application to us

Responsibilities & Duties

• Be a key player in the customer acquisition team to onboard new parents to the company's community
• Share the company's vision and recommend suitable coding programs for students
• Support customer success initiatives like special programmes or competitions, or community events like fireside chats for customer engagement
• Maintain customer relationships and build a strong the company's community.
• Act as parents’ advocate and manage relationships with them
• Plan lead generation events with key partners like Parent Sharings, trial classes and make sure payment for classes are received
• Work with the teaching team to assess the students and follow up with parents for conversion
• Responsible for handling general administrative duties, e.g. sending out onboarding emails, data entry, sorting out data and research
• Ensure that all customer information is properly documented and updated in the CRM system
• Relationship manager for the company's community, continue to track the progress of students and maintain relationships with parents

Skills & Qualifications

• Strong communication and problem solving skills
• Driven, fast learner, proactive and ability to work in a fast-paced environment
• Organised, detail-oriented and ability to manage different projects at once
• Get things done attitude, self-driven
• You are very meticulous and independent, able to set own priorities with time management to complete projects timely
• Diploma / Degree Graduates without experience are welcome to apply as on job training will be provided!

Additional (Good-to-Have!)

• You love to learn and expand knowledge in Computer Science and/or Engineering
• Strong communication and problem solving skills. Open-minded and dynamic
• You are eager to shape the skills and minds of our next generation in equipping them with the right digital skills You have prior teaching experience, be it tutoring, or team training

Location: West Coast Plaza

Company background: Learning in Coding / Robotics for Primary & Secondary school kids.

Working hours: 9am to 6pm (5 days per week, Wednesday to Sundays, PH OFF)

Salary: $2800 to $3500 per month + quarterly / annual bonus

Jessie Hoe Huey Miin

CEI R1103861

EA: 99C4599

Summary

Apple's communications team shapes and shares with the world the stories about our innovative products and services, and the values that drive everything we do. The team includes professionals with backgrounds in public relations, journalism, social media, writing and buzz marketing. We’re looking for trailblazing, creative and collaborative professionals from a variety of fields. If that’s you, then your next home may be here. Come and do the best and most exciting work of your career at Apple. We’re looking for trailblazing, collaborative professionals from a variety of creative fields. Inclusion is a shared responsibility and we work together to foster a culture where everyone belongs and is inspired to do their best work. Come and do the best and most exciting work of your career at Apple. This role will join the Product PR team and report into SEA Senior PR Manager, to help create and implement PR initiatives for Apple's iPhone and Apple Intelligence business with an emphasis on social-first campaigns. We are looking for candidates that possess strong PR and communications skills, along with a consistent track record driving PR results across consumer technology and consumer lifestyle. Ideal profiles are passionate about cultivating new relationships with media and creators, and skilled at developing unique narratives and storylines that resonate with online audiences.

Description

The successful candidate will bring energy, ideas and an appetite to bring fresh storytelling ideas to fruition. This person will be responsible for iPhone as a camera for the world’s most innovative photographers, as a mobile edit suite film makers using software like iMovie, for social content creators on TikTok and Instagram, or for citizen journalists in urban centres. They will have more than an ear to the ground: they will be immersed in an iPhone-enabled culture of photographers, producers, content creators, influencers and media to support all Southeast Asia markets while directly managing Singapore and Malaysia. This person will also be responsible for proactive and reactive communications for Apple’s Artificial Intelligence and Machine Learning (AI/ML) work, which includes Siri, new Apple Intelligence features across all Apple products and services, and other projects.

• This role will work in partnership with the senior manager to create strategies and deliver campaigns that increase awareness and understanding of products and their software across Southeast Asia.
• The successful candidate will work collaboratively with a variety of other teams and functions to create and deliver the activity that increases awareness and understanding. This may include other product PR managers covering iPad, Mac and Services, country product PR teams in Thailand, Vietnam and Indonesia, Product Marketing and Marcom teams.
• You will help us find new relationships amongst the talent and communities that use our products to deliver the world’s most exciting work, and will be tasked with leading our efforts in finding new media and social platforms through which we can tell those stories.
• This role will involve travel up to 30%.

Minimum Qualifications

• BS/BA or equivalent experience preferred
• 8+ years experience in public relations, influencer relations or PR agency in Southeast Asia.

Preferred Qualifications

• Effectively builds formal and informal relationship networks inside and outside the organisation.
• Develops and delivers effective communications that convey a clear understanding of the unique needs of different audiences.
• Analyses complex, high quantity, and sometimes contradictory information to effectively solve problems.
• Understands internal and external stakeholder requirements, expectations, and needs.
• Understanding of smartphone market an advantage.
• Experience in media relations and developing a network of media contacts in creative, tech, photography, artificial intelligence, design and cultural platforms
• Successfully delivered creative PR campaigns that have created meaningful impact
• Self-motivated, possess a positive team-player attitude and passionate about consumer technology. Self-starter who is dedicated and demonstrates creative and critical thinking abilities
• Able to work with ambiguity and on complex topics across multiple jurisdictions
• Able to influence and gain alignment from others in sensitive situations—without damage to the relationship.
• Excellent written and verbal communications skills.

Summary

Apple's communications team shapes and shares with the world the stories about our innovative products and services, and the values that drive everything we do. The team includes professionals with backgrounds in public relations, journalism, social media, writing and buzz marketing. We’re looking for trailblazing, creative and collaborative professionals from a variety of fields. If that’s you, then your next home may be here. Come and do the best and most exciting work of your career at Apple. We’re looking for trailblazing, collaborative professionals from a variety of creative fields. Inclusion is a shared responsibility and we work together to foster a culture where everyone belongs and is inspired to do their best work. Come and do the best and most exciting work of your career at Apple. This role will join the Product PR team and report into SEA Head of Corporate Communications and PR, to help create and implement PR initiatives for Apple's Mac business with an emphasis on social-first campaigns. We are looking for candidates that possess strong PR and communications skills, along with a consistent track record driving PR results across consumer technology and/or consumer lifestyle. Ideal profiles are passionate about cultivating new relationships with media and creators, and skilled at developing unique narratives and storylines that resonate with online audiences.

Description

The successful candidate will bring energy, ideas and an appetite to drive fresh and relevant storytelling. The world’s most creative, exciting and innovative work is created with Mac and our ecosystem. This role will influence how Mac brings new levels of innovation to creative industries, film, television and music production; how it enables scientific discoveries or enables medical advancements and how its versatility creates new ways of working in business, learning in the classroom, and enabling creativity in households and studios.

• This role will work in partnership with agency teams across the region to create strategies and deliver campaigns that increase awareness and understanding of products and their software.
• The successful candidate will work collaboratively with a variety of other teams and functions to create and deliver the activity that increases awareness and understanding. This may include other product PR managers, including Apple Intelligence and operating systems, SEA product PR Managers across iPhone, iPad, Apple Watch, education and health, Product Marketing and Marcom teams.
• This role will help find new relationships amongst the talent and communities that use our products to deliver the world’s most exciting work, and will be tasked with leading our efforts in finding new media and social platforms through which we can tell those stories.
• This role will involve travel up to 30%.

Minimum Qualifications

• BS/BA or equivalent experience preferred
• 8+ years experience in public relations, influencer relations or PR agency in Southeast Asia
• Excellent written and verbal communications skills

Preferred Qualifications

• Effectively builds formal and informal relationship networks inside and outside the organisation.
• Develops and delivers effective communications that convey a clear understanding of the unique needs of different audiences
• Analyses complex, high quantity, and sometimes contradictory information to effectively solve problems
• Understands internal and external stakeholder requirements, expectations, and needs.
• Understanding of PC market an advantage
• Experience in media relations and developing a network of media contacts in creative, tech, design and cultural platforms
• Successfully delivered creative PR campaigns that have created meaningful impact
• Self-motivated, possess a positive team-player attitude and passionate about consumer technology. Self-starter who is dedicated and demonstrates creative and critical thinking abilities
• Able to work with ambiguity and on complex topics across multiple jurisdictions
• Able to influence and gain alignment from others in sensitive situations—without damage to the relationship

Job Description:

1. Attend Customer Design discussions.
2. Help Customer with Network Integration Activities.
3. Network Acceptance Testing
4. Help Customer with Network Migration activities.
5. Network Monitoring after migration or integration.

Job requirements:

• Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.
• Basic understanding of software development processes, IT infrastructure, or other technical fields relevant to the organisation.

Job Responsibilities:

• New technology yield and performance analysis for product development.

• Co-work with Fab to solve yield/performance related issue and provide process directions for yield improvement and ramp up.

• Communicate with customer to bring up new product yield and support product characterization.

Job Duties:

•Bachelor degree or above in Electrical Engineering, Physics, Materials science, Chemistry or Chemical Engineering

•8+year's expereince in Product Engineering

•Fab knowledge is preferred

•Team leader with good communication/ coordination skill.

•Knowledge in Yield and Failure Analysis Management

•Strong communication and interpersonal skills

•Capability to manage a team of engineers.

PURPOSE:

• Collaborate with Fujifilm Business Innovation (FB) Japan Headquarters (HQ) and Asia Pacific (APAC) General Manager (GM) in formulating and executing the Graphic Communications (GC) division’s business strategies in APAC region and towards global expansion
• Oversee product marketing activities in 14 subsidiaries in APAC, ensuring success and outcomes, achieving business targets at maximum productivity and efficiency

RESPONSIBILITIES & TASKS:

• Collaborate with Japan HQ and APAC GM in formulating and executing the division’s business strategies in 14 subsidiaries in APAC region to ensure business targets are achieved and profits maximized
• Oversee all new product launch activities in APAC (Southeast Asia, East Asia and Oceania) subsidiaries, from deployment of GC Go-to-Market (GTM) strategies, to product trainings, marketing collaterals creation and distribution
• Support new GC product launches in new territories, including USA and Europe
• Oversee the entire GC product life cycle management including the support and management of existing products inquiries from all APAC subsidiaries, product customization and future feature requests, and end-of-life management
• Ensure synergy in GC business performance across APAC
• Provide direction, guidance, coaching and mentorship to all members of the team
• Oversee all day-to-day operations and activities relevant to the above

To succeed in this role, the candidate should possess the following qualifications, skills and experience:

• 10 years of experience in an Executive or Senior Management role with proven success in a mature Graphic Communications market
• Experience and knowledge in planning, budgeting, financial management and business operations
• Diploma/Degree or related field
• Established understanding of the GC market and the digital transformation drivers
• Strong background in APAC Sales and Marketing from within the GC Market
• Established understanding of pricing and positioning strategies across multiple markets within a regional framework
• Outstanding organizational, leadership and managerial skills
• Self-driven, proactive with excellent critical thinking and able to maneuver all levels of a matrix organization
• Strong business acumen, problem-solving aptitude and decision-making ability
• Excellent communication skills
• Ability to prioritize tasks and delegate responsibilities effectively
• Ability to motivate and lead employees, and provide coaching and mentorship
• Ability to work under pressure and meet deadlines
• Ability to write and converse in Japanese (minimally JLPT N1) business language in order to liaise with Senior Management in Japan HQ

Job Duties:

• Complete responsibility for all aspects of WET department / sub function or has professional leadership within the company on a broad unique subject.

• Develops new methods of problem solving for department

• Integrates work of own department with other departments. Has to consider impact of solutions to other departments and find overall solutions; can be in global environment

• Generally solves issues in principle, leaves specifics to staff

• Has full staffing responsibility

• Highest authority of subject matter content

• Balances short term and long term goals

• Balances financial, resource and people issues

• Integrates subject matter and industry expertise within a defined area

• Accountable for budget and end results for area managed including cost management.

• Provides advice and counsel related to the operation of the business to leadership teams based on deep subject matter expertise.

• Work is guided by functional strategy and area goals and operational objective.

• Sets area objectives and work plans in alignment with functional strategy.

• Ensures that procedures, processes and standards are continuously reviewed, tested and aligned with the business.

Qualification

• Bachelor degree or above in Electrical, Electronics, Mechanical, Mechatronics, Microelectronics Engineering.

• 8+ years of relevant experience in process engineering, preferably in Electronics, Electrical industry.

• Fab 12" knowledge is preferred

• Proven ability to identify, assess and solve problems

• Analytical with good interpersonal skills

• Team leader with execellent communication/coordination skill.

The Role

This position will provide lease management support for the properties within the Company’s portfolio.

Job Responsibilities

• Responsible for preparation and maintaining of monthly and adhoc management reports to facilitate strategic planning.
• Responsible for data support during meetings or any adhoc requests.
• Assist and involvement in the implementation of projects relating to digital transformation and process improvements.
• Ensure accurate and timely submission of gross sales turnover reports and detailed analysis of rental, gross sales turnover and occupancy cost.
• Responsible for annual audit checks on leases and tenants, arrears management, tenant and other related lease management functions.
• Enter information and data into the system and maintain the database, as well as monitor the status of lease documents.

Job Requirements

• Possess a Degree in Real Estate Management, Business Administration, Accounting, Finance or its equivalent.
• Minimum 4 to 7 years of relevant experience with people management experience.
• Proficient in data analytics and visualization tools such as Tableau and MS Excel.
• Experience working with SAP system and exposure in Real Estate industry will be an added advantage.
• You should be meticulous, diligent, highly organized and have lots of self-initiative. Other key attributes include excellent communication and interpersonal skills.