Overview:

• To follow and understand works as per approved procedures, project specification and drawings for structural components for shop fabrication as per construction sequence and schedule.
• To ensure compliance to HSE regulations and requirement.
• To Supervise the relevant sub-contractors to ensure the major output within the stipulated schedule without scarifying the HSE & Quality requirements.

Responsibilities:

• To prepare constructability slide and co-ordinate with other discipline about construction sequence
• To conduct the daily tool box briefing with subcontractors to comply the project requirements.
• To coordinate the subcontractor's supervisor regarding daily man power allocation and schedule the activities
• To ensure all the workers follow our HSE policies and requirement.
• To attend the PSCC meeting and coordinate incompatible activities without any HSE issues and apply necessary Permits (PTW) and ensure the PTW is approved before commencement of works.
• To check all the activities to be done with proper Risk assessment and method statement and briefed all the workers involved in the job. To raise the NSI request forms for Project and temporary materials whichever not captured by EDD.
• To raise theo El 2 to EDD if required for any technical issues at site activities. To co-ordinate with EDD engineers/Clients for the shop /site related construction activities.
• To participate weekly PMT Meeting & sub-contractor meeting to meet the weekly and monthly progress as per planned schedule.
• To monitor the sub-contractor QC's checks and NDT checks shall happen as per project specification.
• To conduct internal audit and ensure the subcontractes documents are latest.
• To send the progress status to Project engineer weekly or send to planning department for the Progress.
• To ensure all shop fabricated items shall be followed by release note system.
• To ensure the display board with relevant & latest WPS at all time in the Shop or Erection sites.
• To ensure electrode store equipment's that all are calibrated/ monitor and supervise of the electrode store man / monitor and keep a record of daily consumables of electrodes / FCAW wires / SAW wires / Gouging carbons & sufficient available stock.
• To monitor gas consumption and notify to stores department to raise Nsl as and when required.
• To attend Tool box meeting in time particularly in the weekend and nightshift and hand over the activities with return forms
• To Monitor the day hift and night shift Progress and allocate the jobs under his subordinates.

Requirements:

• Diploma/Bachelor Degree related Engineering Disciplines
• For Senior or Lead positions, at least more than 10years of experience
• Strong safety mind-set
• Good interpersonal and communication skills
• Team-oriented and has high initiative
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Able to work at height and/or confined spaces
• This is a 2 years contract position

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

Admiralty Road West, Singapore 759956

(Transport provided from Sembawang MRT)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Descriptions

• Responsible for Company’s Accounting function and ensure data accuracy and smooth accounts team daily operation
• Responsible for managing the company's finances and ensuring accurate and timely of financial reporting. This includes preparing financial statements report in compliance with FRS and other regulatory requirements, analyzing financial data, monitoring cash flow, and maintaining financial records.
• Liaise with bankers of the Company
• Liaise with tax agent for annual corporate tax computation and quarterly GST filing
• Plan, coordinate and execute annual financial audit for the company and associates
• Supervise, coach and review the works of accounts executives
• Oversee account payables, general accounting and fixed assets processes
• Oversee the invoicing process, ensuring that client invoices are accurate, complete, and sent out in a timely manner
• Manage accounts receivable and cash flows, monitor payment collections, and follow up on overdue payments
• Liaise with and provide data analytical support to other business unit heads
• Perform all other related duties as assigned

Job Requirements

• Diploma or Degree in Finance/Accountancy or equivalent with at least 7 years of experience in related field.
• Ability to multi-task and work in a fast pace environment to meet tight deadlines.
• Resourceful, adaptable, well-organized and meticulous with an eye for detail.

Responsibilities:

• Responsible for managing the company's finances and ensuring accurate and timely of financial reporting. This includes preparing financial statements report in compliance with FRS and other regulatory requirements, analyzing financial data, monitoring cash flow, and maintaining financial records
• Full spectrum of the Financial and Accounting functions (Full Set)
• Liaise with bankers of the Company
• Liaise with tax agent for annual corporate tax computation and quarterly GST filing
• Plan, coordinate and execute annual financial audit for the company and associates
• Supervise, coach and review the works of accounts executives
• Oversee account payables, general accounting and fixed assets processes
• Oversee the invoicing process, ensuring that client invoices are accurate, complete, and sent out in a timely manner
• Manage accounts receivable and cash flows, monitor payment collections, and follow up on overdue payments
• Liaise with and provide data analytical support to other business unit heads
• Perform all other related duties as assigned

Requirements:

• Diploma or Degree in Finance/Accountancy or equivalent with at least 7 years of experience in related field
• Ability to multi-task and work in a fast pace environment to meet tight deadlines
• Resourceful,adaptable, well-organized and meticulous with an eye for detail

Set up contracts section and develop team members.

Assist the Director in all matters relating to the project department.

Lead a team of Quantity surveyors and ensure that all contractual issues are fully understood and complied with at existing/new projects. Coach and supervise the QS in the project department.

Lead the project department through all stages and responsible for the administration of sub-contract and main contract including variation Order (VO) and settlement of final accounts.

Oversee and discharge Contracts Management duties such as tender preparation, preparation of costing and Pre-Contract administration. Evaluating and providing recommendations for tenders, and awarding construction and procurement contracts.

Check the submissions by quantity surveyor, external consultants on contract administration matters, such as assessing contractors' claims for progress claim, variation works, extension of time, cash flow report, final account and handling of contractual disputes.

Verify all contractual correspondences related to the project.

Work in conjunction with project management team to ensure compliance.

Any other duties assigned by the Director, Operations Department.

Requirements

Degree in Degree in Building, Quantity Surveying, Civil engineering or equivalent.

Preferably with 10 years and above of relevant experience.

Good knowledge of the construction industry with past experience in main contractor firms. Possess strong personal & negotiation skills and leadership qualities.

Motivated individual with sound knowledge in construction contract law & standard building contract form.

• Apply latest technology implementation to improve operations in own work areas
• Apply organisational policies to ensure deployment and tracking of products meet requirements
• Assist in audit of documentation and contract terms required for trade transactions
• Assist in preparation of contracts and documentation for trade transactions
• Collect data to assess performance of key operations activities in the organisation
• Assist with the management of daily operations, including coordinating with various departments to ensure smooth operations
• Assist with the implementation of new policies and procedures to improve operations
• Maintain records of all business activities, including financial records, inventory, and customer data
• Develop and implement operational strategies to improve efficiency and productivity
• Collaborate with other team members to identify and resolve any issues or concerns
• Respond to customer inquiries and complaints in a timely and professional manner
• Assist with the management of vendor relationships, including negotiating contracts and managing delivery schedules
• Provide support to the operations manager as needed
• Assist in controlling and analyzing quality levels of products and service, guest satisfaction, merchandising and marketing, operating costs and sanitation
• Establish and maintain effective employee relations
• Develop formal training plans and conduct on the job training sessions for Food & Beverage Department employees
• Assist with the compilation of new menus and beverage lists
• Attend and contribute to weekly Food & Beverage departmental meetings
• Inform the Food & Beverage Department on a daily basis of all relevant information on operational matters
• Oversee the preparation, presentation and service of Food and Beverage products to ensure highest quality at all times.
• Must need to work on weekends and Public holidays

Job Description & Requirements

· Plan, execute, monitor and control project as per contractual requirements.

· Liaison with the User, consultants & Authorities on project matters.

· Ensure smooth implementation of work progress so project can be completed on time, within budget and meet contractual & safety standards.

· Manage suppliers and sub-contractors to ensure compliance in terms of QEHS, schedule and cost.

· Monitor construction productivity and provide recommendations for improvement to works.

· Preparation of site progress report and necessary documentation.

· Ensure that all project documentation including emails exchanges are maintained properly.

· Report to top management periodically on status/progress of the project.

· Any other duties assigned by management.

Requirements

Degree in Building or Civil Engineering (recognised by Professional Engineers Board, Singapore).

Minimum 8 Years Experience in similar capacity.

· Able to work independently and lead project team.

· Proficient in Microsoft Project and other Microsoft office software.

Job Title

Contract Manager

Occupation

MANAGER

Job Description & Requirements

1. JOB DESCRIPTION

Job Title

Manager

Occupation

MANAGER

Senior Contract Manager/Contract Manager

Job Description & Requirements

Set up contracts section and develop team members.

Assist the Director in all matters relating to the project department.

Lead a team of Quantity surveyors and ensure that all contractual issues are fully understood and complied with at existing/new projects. Coach and supervise the QS in the project department.

Lead the project department through all stages and responsible for the administration of sub-contract and main contract including variation Order (VO) and settlement of final accounts.

Oversee and discharge Contracts Management duties such as tender preparation, preparation of costing and Pre-Contract administration. Evaluating and providing recommendations for tenders, and awarding construction and procurement contracts.

Check the submissions by quantity surveyor, external consultants on contract administration matters, such as assessing contractors' claims for progress claim, variation works, extension of time, cash flow report, final account and handling of contractual disputes.

Verify all contractual correspondences related to the project.

Work in conjunction with project management team to ensure compliance.

Any other duties assigned by the Director, Operations Department.

Requirements

Degree in Degree in Building, Quantity Surveying, Civil engineering or equivalent.

Preferably with 10 years and above of relevant experience.

Good knowledge of the construction industry with past experience in main contractor firms. Possess strong personal & negotiation skills and leadership qualities.

Motivated individual with sound knowledge in construction contract law & standard building contract form.

Job Description & Requirements

· Plan, execute, monitor and control project as per contractual requirements.

· Liaison with the User, consultants & Authorities on project matters.

· Ensure smooth implementation of work progress so project can be completed on time, within budget and meet contractual & safety standards.

· Manage suppliers and sub-contractors to ensure compliance in terms of QEHS, schedule and cost.

· Monitor construction productivity and provide recommendations for improvement to works.

· Preparation of site progress report and necessary documentation.

· Ensure that all project documentation including emails exchanges are maintained properly.

· Report to top management periodically on status/progress of the project.

· Any other duties assigned by management.

Requirements

- Degree in Building or Civil Engineering (recognised by Professional Engineers Board, Singapore).

- Minimum 8 Years Experience in similar capacity.

- Able to work independently and lead project team.

- Proficient in Microsoft Project and other Microsoft office software.

STRATEGIC LEADERSHIP

• Work with FAB to drive for best-in-class (BIC) Yield ramping.
• Work with key business partners to develop strategic Process Integration tools, systems, methodologies, capabilities and roadmaps. Ensure such support and roadmaps meet business expectations to enable achievement of strategic objectives and Micron’s business plan.
• Create an environment with your group that encourages innovation and technical leadership.

TACTICAL LEADERSHIP

• Conduct ongoing metrics reviews of critical group deliverables to business. Ensure work reviews are conducted on all programs, projects and critical activities to ensure achievement of committed performance. Establish structure for subordinate manager to conduct such reviews within their teams. Ensure such reviews are aligned and effective.
• Provide direct leadership on most critical group deliverables and escalated performance items to ensure barriers are removed and correct resources are applied. Ensure timely and transparent communication with business partners if performance issues will risk business objectives.
• Provide periodical one-on-one sessions to review progress to the Work Plan and adjust training and performance goals.

PERFORMANCE MANAGEMENT

• Ensure clear direction, performance goals, job profiles and job expectations are established for all Team Members.
• Partner with Team Members on establishing aggressive but achievable goals. Maintain a balance between task-related goals versus results-driven goals.
• Drive accountability through clear communication, informal feedback, effective project management, and appropriate usage of metrics.

COMMUNICATION

• Provide regular and structured communications to your team, including progress toward strategic objectives, Operations goals, priority projects, and company status. Ensure Team Members are well-engaged and motivated to achieve group and company objectives. Ensure subordinate managers communicate consistently and in alignment with your regular communications.
• Ensure structured communications with Team Members provide proper motivation and optimism toward achieving Process Integration Engineering vision and mission.
• Develop external relationships to achieve new ideas and procedures to keep pace with industry standards and methods.

TRAINING AND CAREER DEVELOPMENT

• Ensure the group’s training roadmap is maintained. Focus on developing leading-edge skills and preventing isolated skill sets that risk business continuity.
• Ensure leaders set specific training plans, performance goals and development activities for their Team Members.
• Develop potential successors within your group and coach/mentor to develop skills.

Your responsibilities will include, but are not limited to, the following:

• Identify and quantify key module deficiencies and technology gaps. Lead cross-functional teams to address these issues. Improve current process flows and develop innovative solutions to meet product requirements and manufacturability.
• Develop or redefine CSPEC criteria for optimal product performance and drive activities to ensure manufacturing process capability.
• Coordinate activities at the manufacturing site to secure funding for experiments, and conversions, and effectively communicate decisions to relevant R&D, Product Engineering, and Manufacturing partners.
• Undertake development projects to evaluate and implement new integration schemes for alpha and derivative part types. Establish proof of concept for future tech nodes at the manufacturing facility.
• Take on a leadership role at quarterly yield summits and monthly program reviews to summarize complex problems, explain actions taken to address them, and align R&D, Manufacturing, and senior management teams.
• Assist in the transfer of new technology from R&D to manufacturing. Contribute to ensuring a successful ramp-up and qualification. Support the transfer, documentation, and training of module fundamentals into manufacturing.

Successful candidates for this position,

Must have:

• Passionate about semiconductor technology and innovation.
• Adept at data analysis, problem-solving, and process integration optimization.
• Excellent communication skills and ability to work in cross-functional teams.
• Committed to quality, collaboration, and continuous improvement.
• Ability to be self-motivated, and self-governing with proven ability to work in a demanding & dynamic environment.
• Ability to travel for extended periods to the US for collaborative R&D work

Preferred to have Skills / Experiences as below:

• MS or PhD in Electrical Engineering preferably specialized in Microelectronics, Semiconductor Device Physics.
• Proficiency in scripting/programming/engineering/business intelligence/Analytics software, such as Python, SolidWorks, Tableau, Power BI, etc. is desirable.
• Experience in the semiconductor industry in the areas of Process Integration and Yield Enhancement preferred.
• Ability to develop a strong holistic end-to-end understanding of particular PI modules on new NAND technologies and related structural & electrical fail mechanisms.
• In-depth knowledge and direct experience with non-volatile memories (NAND) along with good understanding of the NAND process flow, the interaction of process & device, common yield & reliability issues are desirable.
• Exposure to R&D and transfer/manufacturing is desirable.

Advertising Manager

Must be able to handle

1. Campaign Planning and Strategy:

• Market Research: Conduct research to understand market trends, customer behavior, and competitors.
• Target Audience Identification: Determine the ideal audience for the product or service.
• Budget Management: Allocate and manage the budget for advertising campaigns.
• Campaign Objectives: Define goals such as increasing sales, generating leads, or raising brand awareness.

2. Creative Direction:

• Concept Development: Work with creative teams (copywriters, graphic designers, and art directors) to develop the visual and message concepts for campaigns.
• Ad Format Selection: Decide the types of ads to use, such as TV, radio, print, digital, or social media.
• Message Crafting: Ensure that advertising content is aligned with the brand’s voice and resonates with the target audience.

3. Media Planning and Buying:

• Channel Selection: Choose appropriate platforms (TV, social media, websites, print media, etc.) for placing ads based on where the target audience is most active.
• Negotiations: Negotiate advertising rates and placements with media outlets and agencies.
• Campaign Scheduling: Determine when and where ads will run to achieve maximum visibility and impact.

4. Coordination and Team Management:

• Collaboration: Work closely with other departments (sales, marketing, product development) to align advertising efforts with overall business objectives.
• Vendor Management: Liaise with external advertising agencies, production companies, or freelance talent.
• Team Oversight: Lead and manage the advertising team, overseeing their day-to-day activities.

5. Performance Monitoring and Reporting:

• Campaign Tracking: Use analytics tools to monitor the effectiveness of campaigns in real-time (e.g., impressions, clicks, conversions).
• ROI Analysis: Evaluate the return on investment (ROI) and assess if the advertising goals are being met.
• Adjustments: Make necessary adjustments to campaigns based on performance data, such as shifting budgets or changing creatives.

6. Compliance and Legal:

• Ad Regulations: Ensure that all advertising adheres to industry regulations, legal guidelines, and ethical standards.
• Brand Consistency: Maintain brand consistency across all ads, ensuring that the messaging aligns with the overall corporate image.

7. Trend Adaptation:

• Staying Updated: Keep abreast of new trends in advertising, technology, and media consumption.
• Innovation: Incorporate new techniques, platforms, and formats to enhance ad effectiveness (e.g., influencer marketing, AI-driven ads, etc.).

Skills Required:

• Analytical Skills: Ability to analyze data and make informed decisions about ad performance and audience targeting.
• Creativity: Strong sense of creativity for developing compelling ad content.
• Communication: Excellent communication skills to convey ideas and collaborate with teams.
• Negotiation Skills: Strong negotiation skills for dealing with media vendors.
• Project Management: Ability to manage multiple projects and meet deadlines.

Bachelors or Masters preferred.

Must be able to travel and get own sales and leads for advertising while handling current company workload.

Must be able to handle different clients and liase with different suppliers and customers to provide one stop service.

Must be able to work at different hours to handle different clients from different timezone.

Main Responsibilities:

• Spearhead initiatives that strive to build a strong and diverse talent pipeline.
• Craft and implement strategies that attract exceptional talent from various backgrounds, encouraging an inclusive workforce.
• Design and implement programs to build PhD hiring pipeline
• Translate global strategies into localized programs that improve the scale, quality and diversity of our talent pipeline – expertise and innovative thinking will be important in ensuring that our recruitment initiatives align with our overarching business goals
• Collaborate with business leaders, HR Business Partners, and other team members to ensure hiring needs are in line with global strategies. Building positive relationships and maintaining effective communication will be vital to the success of talent acquisition programs.
• Build and implement inventive programs that engage, pipeline, and attract outstanding talent through non-traditional pathways, attracting talent through unconventional routes.

Other Responsibilities:

• Create and lead initiatives specifically focused on identifying, engaging, attracting, and hiring talent from diverse and unconventional backgrounds. Your creativity and resourcefulness will be instrumental in building a diverse and inclusive workforce.
• As part of our commitment to fostering inclusivity, you will be responsible for developing and implementing inventive talent sourcing methods. Your capacity to think creatively and harness a range of platforms and channels will be integral in attracting a diverse array of candidates.
• To ensure a continuous talent pipeline, you will collaborate with educational institutions and government agencies to develop career skills and provide opportunities for upskilling and reskilling talent. Your ability to build strong partnerships and identify mutually beneficial opportunities will be key in this aspect of your role.
• Actively participating in social media and networking events, you will establish connections with potential candidates and promote Micron as an attractive employer. Your knowledge in using these platforms will help us expand our talent pool and attract highly skilled individuals to join our organization.
• As an advocate for inclusive hiring practices, you will integrate diversity, equity, and inclusion (DEI) principles into all aspects of our recruitment process. Your commitment to ensuring equal opportunities for all candidates will contribute to the creation of a diverse and inclusive workforce.
• To measure the effectiveness of our talent acquisition programs, you will provide data, metrics, and reporting to our partners. By analyzing and presenting this information, you will help inform strategic decisions and drive continuous improvement.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

Job Responsibilities

• Advanced process development tasks SEM CD, OCD or other metrology techniques in 3D NAND technology.
• Identify and provide solutions for inline detection in collaboration with process engineer and process integration.
• Identify modeling opportunities using metrology and detection data to explain electrical failed signature at probe
• Collaborate with US TD Metro team on technology choices for the upcoming nodes and able to translate future technology device needs into clear equipment roadmap requirements.
• Work closely with the planning team to understand Model-on-record (MOR) impact of new technology. Maintain MOR accuracy to enable successful technology ramp.
• Influence vendor equipment roadmap to enable new technology development in Micron

Requirements:

• Masters/PhD in Engineering would be advantageous
• Experience with semiconductor inspection equipment is preferred.
• Data Science and Data Manipulation skills: Ready to learn and apply basic scripting, coding, or programming.
• Preference for metrology or inspection experience: Especially related to data analysis and root cause investigation.
• Capable of international travel up to 3-5 months
• Good communication skills (verbal and written)

Micron’s NTI TD group is looking for process development engineer to support TD activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Description

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing Diffusion team on the key technology issues that need Technology Development (TD) breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise TD Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.
• Ownership of module business process

Requirements

• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are welcomed to apply.
• A deep understanding of flow dynamics , thermodynamics, physical phenomena and their direct application to Diffusion deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2 - 4 months at a stretch to work on technology development.

You are responsible for, but are not limited to, the following:

• Develop and optimize unit processes to meet the yield and quality requirements of advanced Replacement Gate 3D NAND parts
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing Dry Etch team on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Identify process simplification opportunities and drive multi-functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Provide advice and counsel to management on significant technical issues. Lead and initiate ground breaking projects through patents/technical papers.
• Communicate and collaborate with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a requirement.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

You should possess

• Masters/PhD in Electrical & Electronics, Chemical, Mechanical, Materials Engineering.
• Strong aptitude for research and development and ability to create production-worthy technologies.
• Ability to develop and maintain relations with multi-functional teams and vendors.
• Strong communication skills (written, verbal and presentation).
• Highly motivated and adaptable to our demanding, dynamic and rapidly changing work environment; flexibility to work for extended hours, as required.
• Ability to travel to US R&D site for few months to engage in collaborative R&D work.

Responsibilities

• Process module ownership involving regE process characterizations and advanced process developments for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop regE processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer regE processes to high volume manufacturing (Fab10), and work on continuous improvements to manufacturability.
• Address specific wafer edge issues (such as bevel defects, uniformity issues), working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving regE process margins required for meeting the mature yield goal for 3D NAND parts.
• Initiate and manage experiments to widen regE process margins as well as to test out manufacturability of next node solutions
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Masters degree or higher in Materials Science, Chemical Engineering or Physics.
• Familiarity with regE process developments and yield improvements.
• Understanding of various integration and structural impacts and constraints related to wafer edge.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.
• Suitable candidates may be considered for Expat posting to Singapore from overseas locations.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND part type
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement Prioritize within Singapore based manufacturing Wet Etch team on the key technology issues that need TD breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement Participate with Boise TD peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise TD to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally.
• Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.
  
  Requirements
• Masters/PhD graduates in Materials Science, Chemical/Microelectronic Engineering or Chemistry are welcomed to apply.
• A deep understanding of chemistry, chemical kinetics, thermodynamics and mass transport
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE) Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 2-4 months at a stretch to work on technology development.

Responsibilities

• Process module ownership involving Chemical Mechanical Planarization (CMP) process characterization and advanced process development for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer CMP processes to high volume manufacturing (Fab10N), and work on continuous improvements to manufacturability.
• Address process issues working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving the process margins required for meeting the mature yield goal for 3D NAND parts.
• Advanced 3D NAND CMP process development will include performing fundamental research, consumables development, and hardware evaluation, as well as testing processes for novel applications.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Masters Degree or higher in Materials Science, Chemical Engineering or Physics
• Hands-on experience in leading edge CMP polishing equipment preferred.
• Familiarity with CMP equipment operation, optical metrology, profilometry, polishing slurries, conditioners, and polishing pads.
• In-depth understanding of polishing mechanisms for dielectric and metal CMP.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.
• Suitable candidates may be considered for Expat posting to Singapore from overseas locations.

You are responsible for, but are not limited to, the following:

• Develop and optimize lithography processes to meet yield and quality requirements of advanced Replacement Gate 3D NAND parts
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing photolithography team on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Collaborate with Boise R&D peers on technology adaptation and cost optimization towards upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Identify process simplification opportunities and drive multi-functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Provide advice and counsel to management on significant technical issues. Lead and initiate ground breaking projects through patents/technical papers.
• Communicate and collaborate with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a requirement.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough

You should possess

• Masters/PhD in Electrical & Electronics, Chemical, Mechanical, Materials Engineering.
• Strong aptitude for research and development and ability to create production-worthy technologies.
• Ability to develop and maintain relations with multi-functional teams and vendors.
• Strong communication skills (written, verbal and presentation).
• Highly motivated and adaptable to demanding, dynamic and rapidly changing work environment; flexibility to work for extended hours, as required.
• Ability to travel to US R&D site for few months to engage in collaborative R&D work.

Description

As a NAND CMOS Process Integration Engineer in the Singapore Technology Development department at Micron Technology Inc., you will be responsible for developing 3D NAND CMOS devices scaling and enhancing their performance, reliability and manufacturability.

Responsibilities:

• Develop and innovate critical CMOS modules. Drive multi-functional teams to optimize existing process flows and develop new innovative solutions to meet product requirements and manufacturability.
• Develop/re-define critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Extract and analyze inline, probe, parametric, reliability, and other critical metrics and predict future behavior of the CMOS device performance of the product to enable early innovative solutions to meet product and device specifications.
• Early introduction, characterization and validation of new CMOS device models and test structures for developing future NAND products.
• 3 dimensions analysis with the use of K2 view to extract layout information and combine with the doping profiles of each implant step for product development and integration solutions.
• Interact and collaborate with TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Coordinate activities at manufacturing site towards gating experiment funding, conversions, and effectively communicate decisions made to all R&D, manufacturing, and relevant partners.
• Take on leadership role at quarterly yield summits and monthly program reviews in summarizing complex problems, deriving and explaining actions taken to address them and getting R&D, manufacturing, and senior management teams on the same page.
• Assist in the transfer of a new technology from R&D to manufacturing and contribute towards ensuring successful ramp and qualification. Supporting the transfer, documentation and training of module fundamentals into manufacturing.

Requirements:

• MS or PhD in Electrical Engineering preferably specialized in Microelectronics and Semiconductor Device Physics. Prior technology development and tech transfer/manufacturing experiences are preferred.
• Fresh MS/PhD candidates with knowledge of semiconductor process Integration, device physics and CMOS engineering.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Ability to develop a strong, holistic, end-to-end understanding of CMOS device and its related module on NAND technologies, related structural and electrical fail mechanisms.
• Deep understanding of probe failure mechanism, ability to do electrical bench data collection.
• Self-motivated, self-governing with proven ability to work in a demanding and dynamic environment.
• Experienced in coordinating cross-functional teams to achieve a goal.
• Solid data analysis, communication and reporting abilities with demonstrated presentation abilities.
• Curiosity and natural tendency of learning new things independently.
• Ability to travel for extended periods of time to the US for collaborative R&D work.

Develop business strategies to raise our customers’ pool, expand store traffic and optimize profitability

Meet sales goals by training, motivating, mentoring and providing feedback to sales staff

Ensure high levels of customers satisfaction through excellent service

Complete store administration and ensure compliance with policies and procedures

Maintain outstanding store condition and visual merchandising standards

Guide factory safety standard operation, ensure video quality and safety supervision

Reasonable arrangement of workers' work and rest time

Able to coordinate the deployment of work

Be familiar with every link of food processing and manufacturing to ensure food quality and safety.

Familiar with company food sales.

Manage existing customers and develop new business

Responsible for clients requests and develope long term relationship with clients

Resolve clients' concerns and feedback

Be able to actively master sales skills and familiar with sales channels, including online sales

Can work well independently as well as in a team

Assist department manager to complete assigned work

Who We Are

As Singapore’s leading homegrown manufacturer of halal certified ice cream, gelato and sorbets for over 20 years, we supply a diverse range of clients with our premium products. Selling both locally and internationally, we are committed to making sweet memories with food. From our 12,000 sq. ft. factory, we produce classic and create bespoke flavours for our clients. Our products are also available wholesale under our brand Artisertz or as OEM. We offer a wide range of value added products (equipment, packaging, and ingredients) and services to complement what we manufacture.

Job Description

Key Responsibilities

1. Content Creation and Management: Oversee the creation of engaging content for company's website, social media, and other digital platforms. Ensure consistency in the brand voice across all digital channels.

2. SEO and SEM: Optimize website content for search engines (SEO) to increase organic traffic. Manage pay-per-click (PPC) advertising campaigns, including budget management and performance analysis.

3. Social Media Management: Plan and execute social media campaigns to drive engagement and brand awareness. Monitor social media platforms for customer feedback and respond appropriately.

4. Email Marketing: Design and manage email marketing campaigns to nurture leads and convert them into customers. Analyze email performance and implement improvements.

5. Analytics and Reporting: Use tools like Google Analytics to track and report on digital marketing performance. Provide insights and recommendations based on data analysis.

6. Campaign Management: Coordinate and execute digital marketing campaigns across various channels. Ensure campaigns are delivered on time and within budget.

7. Collaborations and Partnerships: Work with influencers and partners to amplify the company's digital presence. Manage relationships with external agencies and vendor

Key Skills:

1. Technical Skills: SEO & SEM: Know how to improve website visibility and manage paid search ads.

2. Analytics Tools: Use tools like Google Analytics to track and analyze digital performance.

3. Social Media Management: Handle social media platforms and plan effective campaigns.

4. Email Marketing: Create and manage email campaigns using tools like Mailchimp, Brevo.

5. Content Management Systems: Experience with platforms like WordPress for website content.

6. Creative Skills: Content Creation: Write and produce engaging content for online platforms.

· Copywriting: Write persuasive and clear marketing messages.

· Basic Design: Understand basic graphic design principles and tools.

7. Analytical Skills:

· Data Analysis: Interpret data to understand and improve marketing results.

· Performance Tracking: Monitor how well campaigns are doing and find ways to improve.

8. Communication Skills:

· Verbal:Communicate ideas clearly with team members and partners.

· Written: Write clear and effective marketing content.

Requirements

Relevant experience in similar role.

Responsibility

• Directly manage district managers across the Asia Pacfic region and Japan RSS sellers
• Manage to and develop business plans to enable and accelerate sales growth
• Develop strategies to drive ARR growth for the Asia Pacific renewals and services organization
• Effectively collaborate with internal stakeholders, peers, and executive leadership team
• Demonstrate strong leadership qualities to help drive, motivate, and develop remote sales organization
• Disciplined management of a renewals process including forecast activities, funnel management, and KPIs to ensure success and achievement of sales targets
• Ability to articulate and demonstrate (at a high level) Keysight’s value propositions to customers at all levels within their business
• Effective and professional communications
• Drive/ support change management and related communications
• Ability to drive operational efficiency to streamline the sales cycle to maximize productivity

Requirements

• 10+ years of relevant experience in management and sales or renewal / service sales
• Bachelors or Master’s Degree or equivalent experience
• Strong analytical and collaborative problem-solving skills, business judgment and financial acumen
• Highly motivated and professional, with excellent verbal, communication, presentation, and social skills
• Demonstrate sense of urgency with ability to multitask in a fast-paced environment
• Strategic scheduled approach to leading a team; driven by disciplined execution and proactive proven sales methodologies and mentality
• Goal Driven with strong relationships inside and outside the company and drives for robust partnerships and collaborations cross-functionally
• Win-win attitude with sound judgment and resource management
• Works collaboratively with Keysight leadership teams, Keysight business centers, marketing and delivery teams to maximize business results and create growth opportunities
• English written and verbal language skills