Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

Job Title: Patient Service Executive / Network Clinic Coordinator

Responsibilities:

· Support United Primary Care Network (PCN) recruitment, onboarding, and training of GP Partners.

· Promote GP engagement, attend to their enquiries and support them in Healthier SG (HSG) drive.

· Work closely with GPs for PCN and HSG enrolment of chronic and well patients

· Liaise with the service providers or GPs in arranging provision of ancillary services by PCN/HSG

· Support GPs in better integration and coordination with various social partners and institutions

· Provide administrative support to GPs on patient referral to community and social partners, such as Active Aging Centres (AAC), Day Care, Home Care services etc.

· Support the compliance of GP partners with audit requirements of the PCN program.

· Establish feedback management from MOH/AIC to GP partners and vice versa.

· Support the admin team in administering surveys and collating data for analysis and reporting.

· Share Clinic Performance Management to GP partners.

· Assist Nurse Counsellors to provide basic counselling to patients on their care plan compliance and lifestyle modification as required.

· Perform adhoc duties assigned by the Head of PCN.

Job Requirement:

· GCE O Level/ Diploma Holder/ Degree Holder.

· Relevant work experience in healthcare would be an added advantage.

· Ability to work as a team player and independently with minimal supervision.

· Meticulous and able to keep proper and timely documentation of HSG/PCN records, database and quality-related reports.

· Competent in MS Office, in particular MS Excel.

• Facilitate all software modifications and upgrades as part of the software maintenance to upkeep smooth operations of the system.
• Prepare and review SUCOs / SARs (Access request approval) before obtaining approval from customer

• Reports to O&M Manager & Assistant Manager.
• Deliver service and support to the O&M Team when requested.
• Attend to and manage all software or  hardware related errors.
• Work closely with System Administrator to resolve software and  hardware related issues.
• Diagnose and resolve technical hardware and software issues involving BHS Application, network connectivity and more.
• Gather information and determine the issue by evaluating, analyzing and isolating the details/symptoms.
• Follow standard processes and procedures.
• Identify and escalate priority issues.
• Redirect problems to appropriate resource.
• Reviews all system occurrences to prevent recurrence.
• Coordinate and follow up with  Hotline on all reported cases and communicate to the customer where necessary.
• Interact with the customer to provide and process information in response to inquiries, concerns, and requests about products and services.
• Provide guidance and training to CC room staff on all software related matters.
• Carry out training to staff and conduct practical test during off peak period.
• Coordinate with local equipment supplier/vendors (system related).
• Perform periodically review of system logs, operations report and follow up on action plans.
• Review monthly operations statistics together with the Manager.
• Provide monthly system performance analysis and generate required reports for stakeholders
• Develop and maintain installation and configuration procedures where necessary.
• Maintain operational, configuration, or other procedures where necessary.
• Schedule & deploy firmware updates & patches for equipment (Servers and Network devices) with vendors.
• Stay current with system information, changes, and updates.

Micron is seeking a highly motivated and experienced individual contributor to join our Assembly Package Technology Development (TD) team. As a Sr/Engineer in the Process Development team, you will play a crucial role in developing and qualifying new materials, equipment, and wafer tech nodes for Micron's world-class products and devices.

• Primarily responsible for Cleanroom 1 (CR1) Area processes such as Wafer Grinding/ Stealth Dicing/ Laser Groove/ Die Separation/ and Wafer Saw. Cleanroom 2 (CR2) Flip Chip Underfill, Die Attach, and Wirebond
• Development and Qualification of new direct and indirect materials, new equipment, and new wafer tech nodes.
• Ensure product quality and process performance while driving projects focused on cost reduction, productivity improvement, risk mitigation, and resolving manufacturing challenges.
• Collaborate and lead teams from various departments to ensure smooth development transfer to all Micron network sites.
• Familiarize and implement PMI (Product Maturity Index) methodology and provide accurate documentation for product transfer.
• Develop, configure, and optimize Package Assembly processes (Front End, Bonding, and Back End) for Micron's memory products from pathfinding to NPI start-up and certification.
• Collaborate with Design teams globally in the development of assembly design rules, involved in the design approvals (Substrate and Silicon), running, testing and upgrading systems and processes, and approving materials, process, and equipment changes in the CCB (change control board).

Requirements:

• Masters/Bachelor's Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics
• At least 5 years of experience in the semiconductor industry with proven knowledge and skills in assembly
• Excellent problem-solving skills and familiarity with data-driven analysis, statistical analysis, and data interpretation.
• Strong project management skills and ability to multitask to ensure the execution of timelines.
• Strong collaboration skills to work closely with diverse teams and gain insights into business needs and customers' requirements.
• Deep fundamental understanding of key risks in Cleanroom 1 processes and Cleanroom 2 process
• Multiple process capability is a plus

Responsibilities:

• Lead and execute software testing efforts for banking and financial domain applications, including CRM, campaign management, and wealth management.
• Develop test plans, test strategies, estimates, and metrics to ensure comprehensive coverage.
• Define and implement nonfunctional scenarios for performance testing and automation test cases.
• Conduct functional, ETL, SIT, UAT, E2E, file testing, regression testing, data migration testing, and support UAT processes.
• Perform testing on diverse systems, including Teradata, Oracle SQL, PL/SQL, and ETL platforms.
• Execute API testing using tools like Postman and technologies such as Kafka and Adobe Analytics.
• Work with front office applications like RM Desktop-PEARL, Cross Border Communication BCBOH, and KYC onboarding tools (ICE, EUCLID).
• Lead project calls with clients to ensure effective onsite-offshore coordination and allocate tasks to subordinates.
• Collaborate with business stakeholders as a functional business analyst, gathering requirements, and managing UAT testing.
• Handle test scenarios, traceability matrix preparation, test case development, and execution in an Agile environment.
• Use tools such as ALM, JIRA, Unix, UFT, and Selenium for test management and automation.
• Generate comprehensive project reports and maintain all project trackers, including dashboarding, individual progress tracking, and issue management.
• Provide guidance, mentoring, and training to junior team members.

Qualifications:

• 10+ years of experience in software testing within the Banking and Financial Domain.
• Expertise in CRM applications, campaign management, data warehouse processing, and front office systems.
• Hands-on experience in performance, integration, functional, E2E, security, rollback, and API testing.
• Proficiency with Oracle SQL Server, PL/SQL Developer, Dream Quark, IBM IIDR CDC, Toucan Toco, ELK, BI4, Ambari, Hive, and other databases and data visualization tools.
• Knowledge of cash equities, bonds, equity derivatives, credit cards, trade lifecycle, and corporate action lifecycle.
• Familiarity with CI/CD tools like Jenkins, Bitbucket, SonarQube, and knowledge of automation tools such as UFT and Selenium.
• Strong communication, leadership, problem-solving, and interpersonal skills.
• Ability to work independently, prioritize tasks, and meet deadlines.

We are looking to welcome a Customer Service Representative to join our Global Customer Service Department. You will work as an integral part of the department by providing outstanding customer service to our internal and external customers and report to the Customer Service Manager. 

Closing Date: Applications will close on 4th Nov 2024.

Applications are shortlisted on a rolling basis, and we will be interviewing alongside advertising. We therefore encourage you to apply at the earliest opportunity.

What you'll be doing:

• Take ownership of customer queries received via phone, email, live chat, and in person through to resolution in line with policies/procedures, KPI and Customer First training best practices. Striving to increase customer satisfaction/first-time resolution and reduce the need for customers to contact.
• Take responsibility for the processing of orders, invoices, quotes, returns, and claims in a timely and accurate manner, responding appropriately and swiftly to queries, problems, and special requests from customers, accelerating these to team leaders and managers where appropriate.
• Resolving product or service problems/queries by clarifying customer issues, determining the root cause of the problem, selecting and explaining the best solution to the problem, expediting corrections/adjustments, and following up to ensure resolution.
• On the back of customer contacts review the customer self-help portals and suggest new content or amendments to the relevant team.
• Managing day-to-day business processes, liaising with other departments where appropriate.
• Suggesting amendments to Standard Operating Procedures (SOP).
• Maintaining knowledge of department policies, processes, procedures, and systems used, developing an internal network to increase knowledge.
• Providing support to team members.
• Active participation in meetings, expressing your viewpoint but also recognizing and listening to others.
• Suggesting improvement ideas and assisting with the implementation of those ideas to improve customer satisfaction, increase productivity, or reduce costs.
• Using Salesforce to manage customer contacts and workflow in line with the SOP.
• Using SAP/Salesforce to manage orders/invoicing.
• You achieve personal objectives and, work to agreed KPIs and targets including quality assurance.
• In addition to the above, this role may also be required to help with projects and workload as determined by business needs and the Manager.

Job Description:

• Monitor department performance and report on key metrics.
• Supervise and train team members to maintain high standards.
• Oversee day-to-day operations and optimize workflows.
• Analyse business requirements and adapt to customer needs.
• Maintain a positive attitude and commitment to improvement.
• Communicate effectively with teammates and management.
• Ensure top-notch service delivery and operational excellence.
• Handle heavy equipment as required.

Requirements:

• Relevant experience in F&B supervision.
• Strong leadership and team management skills.
• Hands-on experience implementing operational processes.
• Excellent communication and interpersonal skills.
• Ability to thrive in a fast-paced environment.
• Organizational skills and attention to detail.
• Knowledge of health and safety regulations.
• Understanding of operational principles and policies.
• Demonstrated team leadership capabilities.

A Service Supervisor is responsible for leading the service team during each shift and ensuring that team members observe service, food hygiene and safety standards. Duties include planning and preparing the staff duty roster, providing on-the-job training for staff, overseeing reservations and assigning workstations. The Supervisor is also expected to resolve work-related problems in a positive and professional manner.

SANDP1T is seeking a highly qualified Service Delivery Lead to join our team and work on projects that impact the lives of many. Our products, including Enterprise Login, Payment Gateways, and Training and Learning Management Systems, are used by over 1,000,000 users. We're looking for passionate professionals to grow and learn with us. If you have more experience, you may be considered for a senior role.

Job Overview

The Service Delivery Lead leads and supports programs and projects using different frameworks such as Agile, Hybrid, or Waterfall. They organize and facilitate meetings and events, gather business requirements from stakeholders, and prioritize change requests and bugs to optimize business value. They also remove any impediments for the project team, manage the risk plan and client expectations, and motivate the team to deliver the service according to schedule and quality.

The Service Delivery Lead is responsible for overseeing the entire service delivery life cycle from start to finish, including design, resource allocation, and software development. They also support the execution of test plans and bug fixes and work with different parties within the client organization to accelerate service delivery progress. They also key player in team development and responsible for holding teams accountable for their commitments and maintaining a good relationship with clients, users, and stakeholders. Additionally, they also work with the finance department on COC sign-off and payment milestones.

Good to have:

• Great organizational, planning, and problem-solving skills
• Great interpersonal skills, collaborating and team playing
• Excellent communication and presentation skills in English
• Excellent adapting way of working to environmental constraints
• Good analytical and listening skills
• Ability to translate business requirements into functional requirements
• Excellent understanding of how user centricity is incorporated into SDLC
• Excellent understanding of how product backlog, user stories, acceptance criteria and user flows fit within the development process
• Knowledge and use of Jira and Confluence
• PMI PMP or PRINCE2 certification preferred
• PMI Disciplined Agile / SCRUM certification is a plus

Should have:

• Experience delivering complex projects with multi-squad teams and timelines of up to 24 months.
• Experience working with Singapore Government agencies is preferred.
• Experience in bidding preparation and submission process.
• Experience orienting teams to deploying a service-oriented attitude in dispute situations.
• Experience in presenting to project sponsors and morale management of teams.
• Strong working knowledge of Jira, Confluence, and Microsoft Office tools,including Excel, PowerPoint, and Word.
• Experience in implementing project management tools, SmartSheet, Figma, and graph drawing is a plus; ability to maintain good documents and artifacts is crucial.

Personal traits:

• Resourceful, independent, and able to find creative solutions to problems even under pressure.
• Meticulous in approach, paying close attention to detail and ensuring high-quality work.
• Self-motivated, self-driven, and takes the initiative to take on new tasks and responsibilities.
• Empathetic towards others and able to communicate effectively to managestakeholders' expectations.
• Proven track record of being able to grow, learn, and take on more responsibilities over time.
• Bonus for being able to immerse in the company culture, understand the values and how things work, and adapt to thework environment.

Our Benefits:

• Competitive remuneration package
• Flexible work schedule and remote work options
• Career progression opportunities
• Medical Insurance Coverage
• Open & Transparent Culture with a flat hierarchy

How to Apply

Interested candidates, please send your resume at join.sandp1t.com.

Our Recruitment Process

As a Service Delivery Lead, if you submit your resume, it will be personally reviewed. Qualified candidates will be invited for an interview with the hiring manager. The interview will be an opportunity for us to discuss your experience and expertise in the field and will last for 30 minutes.

Based on the outcome of the interview, the hiring manager will decide if you are a suitable fit for the position. If that is the case, the HR team will reach out to you with an offer and provide next steps.

Application Mode

• Apply by Whatsapp +65 8522 9666

Reporting Structure: Section-in-charge

Job Responsibilities:

1. FOOD RUNNER

• Serve food and beverages to customers
• Accountable for the smooth running of designated area
• Ensure visual quality of all food and beverages items served is according to company’s standards
• Provide a courteous and professional service at all times
• Ensure that cleanliness and hygiene is followed throughout

2. DINING AREA

• Clearing of used soiled cutleries from diner’s table (cutlery collection)
• Arrange table settings of crockeries and cutleries according to company’s standards
• Cleaning duties at service area including:Cleaning of table, chairs sofa seats and baby chair

3. PRE-OPENING PREPARATION

• Perform a range of duties according to outlet’s specification, including:Wiping tables, setting up of tables and ensuring tables have the correct cutleries and table settings
  Preparing and topping up of condiments (e.g. ginger, vinegar, chili sauce)
  Topping up of beverages and preparing tea
  Assist in stock ordering
  Preparing ingredients, check dessert quantity and expiration in the morning to report to supervisor

4. WASHING

• Tidy up workstations, wash tea and ice buckets, water kettle, utensils, etc
• To perform daily, weekly and monthly cleaning routine according to outlet’s specification

Educational Qualification/ Experience / Skills and Competencies Requirements:

• Candidate must possess at least Diploma/Bachelor's Degree in any field

About the role

The incumbent will be leading a team and be part of a larger team within the IFF department in providing seamless and customer-focused solutions to support the achievement of business objectives.

What you will be doing

• Lead the Customer service team for Sea freight
• Liaise with customers on the standard operating procedures
• To meet up with clients on projects / special matters
• Prepare customer key performance index reports
• Promptly handle customers / team escalations
• To implement corrective actions and preventive measures for immediate service recovery
• To co-ordinate with Ocean carriers for bookings / uplift upon escalation from team
• Attend to freight management and rates negotiation
• Provide quotes / rates to COD customer or overseas offices
• Liaise with overseas agents on the various requirements and rates
• Review the profit & loss of product desk
• Analyse job file purchasing and raise concern to Pricing team
• Review & approve changes of work processes before escalation to Head of Sea Freight
• Conduct recruitment exercise for officer / executive position when needed
• Provide related training concerning the BU to new staff assign to the team
• Joint sales visit to resolved operations issue when necessary

Team Management

• Ensure and monitor team compliance to the Bollore’s Code of Conduct and Company’s regulations
• Ensure team understanding and implementation on Bollore’s Value in daily work behaviors
• Plan and monitor team performance including give coaching and counselling needed to deliver expected outcomes
• Plan and monitor team development together with HR Division
• Ensure updated Job Description availability for the team by coordinating with HR Division
• Ensure all changes in Department / Section communicated properly to the team

The successful candidate

• Diploma / Degree preferred
• Minimum 8 years of experience in freight forwarding with sea freight experiences
• Previous customer service experience is an added advantage
• Possess excellent communication and interpersonal skills
• Pleasant personality and a good team player
• Proficient in MS Office & ability to work independently
• DGR trained will be an advantage
• Location: 101 Alps Ave Singapore 498793 (Designated transport Pasir Ris, Ang Mo Kio, Tanah Merah, Tampines, Admiratly, Yishun and Sengkang)

Job Description:

• Facilitate all software modifications and upgrades as part of the software maintenance to upkeep smooth operations of the system.
• Prepare and review SUCOs / SARs (Access request approval) before obtaining approval from customer
• Reports to O&M Manager & Assistant Manager.
• Deliver service and support to the O&M Team when requested.
• Attend to and manage all software or hardware related errors.
• Work closely with System Administrator to resolve software and hardware related issues.
• Diagnose and resolve technical hardware and software issues involving BHS Application, network connectivity and more.
• Gather information and determine the issue by evaluating, analyzing and isolating the details/symptoms.
• Follow standard processes and procedures.
• Identify and escalate priority issues.
• Redirect problems to appropriate resource.
• Reviews all system occurrences to prevent recurrence.
• Coordinate and follow up with Hotline on all reported cases and communicate to the customer where necessary.
• Interact with the customer to provide and process information in response to inquiries, concerns, and requests about products and services.
• Provide guidance and training to CC room staff on all software related matters.
• Carry out training to staff and conduct practical test during off peak period.
• Coordinate with local equipment supplier/vendors (system related).
• Perform periodically review of system logs, operations report and follow up on action plans.
• Review monthly operations statistics together with the Manager.
• Provide monthly system performance analysis and generate required reports for stakeholders
• Develop and maintain installation and configuration procedures where necessary.
• Maintain operational, configuration or other procedures where necessary.
• Schedule & deploy firmware updates & patches for equipment (Servers and Network devices) with vendors.
• Stay current with system information, changes, and updates.

Requirements:

• Degree in Computer Science, Engineering or equivalent.
• Certifications in supporting relevant technologies such as MCP, MCSE and CCNA will be a definite advantage.
• Diploma in Computer Science or Engineering, or its equivalent, with relevant experience of at least 7 years will also be considered.
• Experience in maintaining automated baggage handling systems or automated systems in material handling industries preferred.
• Experience in a control room environment preferred.
• General understanding of the underlying operating system, e.g., VMware, Windows and Linux.
• General understanding of storage technologies, memory management, disk arrays, NAS/SAN, networking.
• Must be a strong team player and able to work independently, with curiosity and strong problem-solving skills.
• Able to travel overseas if required.
• Possess strong communication skills in English.

Responsibilities

Project Planning and Coordination:

Collaborate with the project management team to develop project plans, timelines, and budgets for HVAC projects.

Ensure compliance with project specifications, codes, and industry standards.

Coordinate and schedule project activities, subcontractors, and resources effectively.

Design Review and Analysis:

Review HVAC system design drawings and specifications to identify potential issues or improvements.

Perform engineering calculations and simulations to optimize system performance.

Provide input and technical guidance during the design phase.

Material Procurement and Vendor Management:

Assist in the procurement of HVAC materials and equipment.

Evaluate and select vendors and suppliers based on cost, quality, and reliability.

Maintain strong vendor relationships and ensure timely deliveries.

Quality Control and Inspection:

Implement quality control processes to ensure HVAC systems meet project requirements.

Conduct regular site inspections to verify workmanship and compliance.

Identify and address any deviations from project standards.

Documentation and Reporting:

Maintain accurate project documentation, including drawings, change orders, and progress reports.

Prepare and submit regular project status reports to the project management team.

Document and address any project-related issues or disputes.

Safety and Compliance:

Ensure that all HVAC installations comply with safety regulations and industry standards.

Promote a culture of safety among project team members and subcontractors.

Conduct safety audits and address any safety concerns promptly.

Client Communication:

Act as a primary point of contact for clients regarding HVAC project updates and inquiries.

Address client concerns and seek opportunities for additional services.

Budget and Cost Control:

Monitor project budgets and expenditures to ensure they align with project plans.

Identify cost-saving opportunities and implement cost control measures.

Qualifications

• Bachelor's degree in Mechanical Engineering or related field.
• 1-2 years of experience in HVAC engineering and project management.
• Strong knowledge of HVAC systems, design principles, and industry best practices.
• Proficiency in AutoCAD, HVAC design software, and project management tools.
• Excellent communication, leadership, and teamwork skills.

5.5 days /week

Mon - Fri : 0830 to 1730 hrs

Sat : 0830 to 1230 hrs

JOB SCOPE:

i. Part of integral product team to develop aircraft modification designs and repairs.

ii. Require close interaction with engineers from other disciplines to achieve an optimized and cost-effective design solutions within the stipulated project schedule

iii. Responsible for assessing the aircraft’s structural adequacy by performing various analysis, including:

• Static strength analysis,
• Fatigue and damage tolerance analysis.

iv. Perform structural analyses using either classical methods and/or finite element approach

v. Ensure adherence to airworthiness regulations, relevant design principles, processes, methods and manufacturing capabilities guidelines.

KEY PROJECT(S)

• A320 P2F and A330 P2F new initiatives and serial production support

PREFFERED SKILLS:

1. Strong understanding in structural analysis.
2. Proficient with CAD tools such as CATIA V5 or similar for simple modeling tasks.
3. Proficient in finite element analysis.
4. Able to work as a team.

Your Career

You will work firsthand with our valued customers to address their complex post-sales concerns where analysis of situations or data requires an in-depth evaluation of many factors. You're a critical thinker in understanding the methods, techniques, and evaluation criteria for obtaining results. You'll enjoy networking with key contacts outside your own area of expertise, with a strong capability of detailing difficult technical issues to both non-technical and technical professionals.

You will regularly participate in technical discussions with multi-functional teams, creating an environment of transparency that ultimately leads to better products, better working environments, and better cybersecurity. Your quick thinking and support to our clients provides the fast assistance they need to keep their environments secure - which means you'll need to move quickly, thoughtfully, and provide technical assistance as needed (often, in high pressure situations).

Your Impact

• Provide Tier-3 Technical Support to customers and partners across JAPAC
• Provide configurations, troubleshooting and best practices to customers
• Manage support cases to ensure issues are recorded, tracked, resolved, and follow-ups are completed in a timely manner
• Provide fault isolation and root cause analysis for technical issues
• Publish Technical Support Bulletins and other technical documentation in the Knowledge Base
• Review of technical documentation for training materials, technical marketing collateral, manuals, troubleshooting guides, etc.
• Travel to customer sites in the event of a critical situation to expedite resolution as required
• Provide on-call support 24x7 on an as-needed basis

Responsibilities:

• To lead and drive the requirements gathering process.
• To lead and manage a small team of developers to deliver the modules to develop web-based application systems.
• Participate in the design and development of web applications based on Ecquaria’s product (J2EE-based).
• Lead and manage the user acceptance testing process.
• Implement, customize, test, document and maintain software applications.
• Ensure that the modules delivered are according to the specifications and are of high quality.

Requirements:

• A Degree/Diploma in Computer Science with at least 3 years' software development experience in Internet technology in Win NT, UNIX or LINUX platform
• Those with leadership experience may be considered for the Project Lead position.
• Technical skills include proven object-oriented programming experience with Java and C++ together with extensive RDBMS through JDBC
• Experience in J2EE, Web Services and XML will be advantageous
• Experience in Elixir reporting solutions will be advantageous
• Very strong in SQL
• Data analysis skill will be an added advantage, although this is not compulsory to have.
• Good interpersonal skills

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

Full Time & Part Time Service Crew

要会中文

职位描述：
• 补充餐巾、餐具和补充调味品等用品
• 协助客户订购
• 为顾客提供食品和饮料
• 顾客用餐完毕后清理桌子
• 熟悉POS及配送系统
• 履行开盘和关盘职责
• 洗碗

要求：
• 该职位需要 1 年相关工作经验
• 新加坡人/PR
• 会中文

全职工作:
• 薪资：每月 SGD 2,500 - SGD 2,800
• 每周工作6天（愿意在周末和公共假期工作）

兼职工作：
• 薪资：每小时 SGD 13 - SGD 15
• 最小每周做工2天（愿意在周末和公共假期工作）

Job Description:

• Replenish supplies such as serviette, table ware and refill condiments
• Assist with customer ordering
• Serve food and beverages to customers
• Clean tables after customers have finished dining
• Familiar with POS and food delivery system
• Perform opening and closing duties
• Dish-washing

Requirements:

• Working Hours 10AM - 9PM (2 hours break)
• 1 year of relevant work experience required for this role
• Singaporean/PR

Full Time Service Crew:
• Expected salary: $2,500 - $2,800 per month
• 6 days work week (Able to commit weekends and PH)

Part Time Service Crew:
• Expected salary: $13 - $15 per hour
• Min. 2 days per week (Able to commit weekends and PH)

Roles & responsibilities can include but are not limited to:

Test Product Process of Record (POR) SME:

• Define the Business Process of Test Product Process and provide governance avenue.
• Facilitate & lead the discussion of POR, Manufacturing Build of Material (mBOM) in Review Board for alignment and endorsement prior to release and deploy in Master Data/Teamcenter.
• Provides expertise in Test / Product Process / Customer / Manufacturing BOM Attributes / Operation & Resources assignment, and support for the Work Package implementation.
• Support Teamcenter Manufacturing Change Request for BOP R&O, Work Package creation/change purposes.
• Well-manage and maintain a prioritized list of Topics, action items with timelines, owners, and due date that raised in Review Board.
• Collaborate with Manufacturing, Planning and various engineering team - Quality team, Process Integration team, Test Engineering, Product Engineering teams in Product Process Proliferation activities.
• Use ECN and GCP processes to implement and document changes.
• Understand and routinely use system capabilities to collect, investigate, and support accurate reporting, data analysis, and metric tracking.

Product Process and System Integration Buyoff:

• Govern and Support Test Product Process End-to-End UAT (User Acceptance Testing) for MES, BOP/BOI and host deployment in Backend from end-to-end Process & Operation needs by ensuring processes and procedures are properly tested, communicated, and deployed.
• Work with Engineering, Manufacturing, Quality, System IT, and other relevant teams to support MES (Manufacturing Execution System) and/or BOP (Bill of Process) / BOI (Bill of Information) systems used in Backend area.
• Leverage knowledge, experience, and skills with processes and systems to provide timely solutions for problems and business change requirements.
• Team with Business Analyst, IT and others functional team to minimize risk, improve area efficiency, and ensure product quality through proper system change control and validation.
• Occasional travel required.

Job Requirements:

• Bachelors in Electrical and Electronics Engineering/ Computer Engineering or related
• Experience in Data Visualization tools and libraries like Tableau, Power BI, and Python
• Proficiency with data analysis tools and manufacturing software support systems (MAM, SAP, etc.).
• Knowledge of Siemens Teamcenter Master data management and/or Critical Manufacturing MES systems and processes would be advantageous.
• General understanding of the backend operations for component assembly, component test operations.
• Has depth of understanding and ability to manage worldwide business process. Can take a business process approach in worldwide networks.
• Display leadership experience/potential. Has agility to lead and implement prioritized action items from both tactical and strategic point of views.
• Excellent verbal and written communication and presentation skills.
• Experience in SharePoint list management and in writing optimized SQL queries.
• Keen in semiconductor industry

Additional Job Description

Directs and coordinates engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment and control devices. Determines conditions under which tests are to be conducted, and phases of test operations. Coordinates operational, functional and performance phases of tests. Analyzes and interprets test data. Prepares technical reports of for use by engineering personnel.

We are seeking an experienced Data Engineer with a strong background in Hadoop, Spark, and SQL, specifically within the banking sector. The ideal candidate will be responsible for designing, building, and maintaining large-scale data pipelines and platforms to support critical banking applications and decision-making processes.

Key Responsibilities:

• Data Pipeline Development: Design, develop, and maintain efficient data pipelines and workflows using Hadoop and Spark frameworks to support the bank’s data processing needs.
• Data Integration & ETL: Create ETL processes to extract, transform, and load large datasets into Hadoop ecosystems from various banking systems, ensuring data consistency and accuracy.
• Database Management: Write optimized SQL queries to manage and analyze data stored across relational databases, data lakes, and cloud platforms.
• Data Processing & Analysis: Implement scalable data processing solutions to analyze large datasets, provide insights, and deliver solutions for financial services and risk management.
• Collaboration: Work closely with business analysts, data scientists, and IT teams to ensure data solutions align with banking sector needs, including compliance with regulations and reporting requirements.
• Performance Optimization: Fine-tune Hadoop and Spark applications for performance, improving throughput and reducing latency.

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or a related field.
• Strong years  experience as a Data Engineer, specifically within the banking or financial sector.
• Proficiency in Hadoop ecosystem tools (HDFS, Hive, HBase) and Spark for large-scale data processing.
• Strong experience with SQL and relational databases such as PostgreSQL, MySQL, or Oracle.
• Familiarity with cloud platforms (AWS, Azure) and containerization tools (Docker, Kubernetes) is a plus.
• Experience in data governance and compliance regulations within the financial industry.
• Excellent problem-solving and analytical skills.

• Salary: SGD 6000 - 9500
• Great Work Culture
• Includes comprehensive insurance for self and family. Includes Specialist and Dental Coverage.
• Includes Standard Annual and Sick Leave

About Us
Freyr Technology is at the forefront of AI Data Center development. We are committed to designing and implementing scalable, resilient network fabrics that support AI computing and storage infrastructures. As part of our mission, we are looking for a skilled Data Center Networking Engineer to join our team. This role will be crucial in ensuring optimal performance, reliability, and scalability of our data center networks. This role will be crucial in ensuring optimal performance, reliability, and scalability of our data center networks, with a special focus on IB (InfiniBand) and RoCE (RDMA over Converged Ethernet) technologies.

Key Responsibilities:

• Improve and work with automation tools to speed up network provisioning and enhance the observability of network health.
• Help with decision-making on the network component level across the integrated cloud systems based on performance, features, and cost, including analysis of risks and emphasis on ease of use, reliability, security, availability, maintainability, sustainability, and quality.
• Defines systems implementation and integration approach and plans to ensure optimum performance and reliability across servers, networks, related utilities, and hardware and software that comprise the cloud infrastructure.
• Delivers end-to-end technical solutions to customer problems, including deploying solutions, executing benchmark tests, and preparing documentation.
• Collaborates with other teams to analyze next-generation requirements and opportunities and may influence and guide research and academic collaboration in the space of cloud systems and solutions, including proof of concept and solutions beyond current industry approaches.
• Leverage your knowledge of InfiniBand (IB) and RoCE (RDMA over Converged Ethernet) to optimize network performance in high-performance computing (HPC) environments.

Minimum Qualifications:

• Education:
  • Bachelor's Degree in Electrical/Computer Engineering, Computer Science, or related field with 6+ years of experience.
  • Master's Degree in Electrical/Computer Engineering, Computer Science, or related field with 4+ years of experience.

Experience:

• 5+ years of experience managing and troubleshooting complex data center networks.
• 3+ years of experience with InfiniBand (IB) and/or RoCE (RDMA over Converged Ethernet) technologies.
• 5+ years of experience with classic routing and switching technologies.
• 3+ years of experience with network technologies such as VXLAN/EVPN.
• 3+ years of experience working with Arista hardware, EoS, and eAPI.
• Familiarity with network monitoring techniques, including telemetry streaming.
• Proficiency with Linux-like operating systems.
• Experience with network automation tools (e.g., Ansible).
• Knowledge of Network Zero Touch Provisioning (ZTP).

Preferred Qualifications:

• Python/GO, Ansible, GIT
• Network services such as DDI, Firewalls, and Load Balancers
• Knowledge of the server platforms, NICs
• CI/CD methodology and GitHub/GitLab repository distribution
• Data Center planning - rack elevations, cabling plan, cables/transceivers.
• IP planning

Additional Requirements:

• Travel: Willingness to travel to and potentially reside for extended periods in Thailand, Malaysia, and Indonesia for project-based assignments.

Join us in driving innovation in AI Data Center technology!

Job description:

• Responsible to develop and review electrical design plans, specifications, and construction documents for the project.
• Provide technical guidance and oversight to the electrical design team, ensuring that electrical systems are designed and installed according to project standards and codes.
• Collaborate with architects, structural engineers, and other stakeholders to ensure that electrical systems are integrated correctly into the building design.
• Review shop drawings, submittals, and RFIs related to electrical systems and equipment and provide timely feedback to the design team.
• Conduct site visits and inspections to ensure that electrical systems are installed correctly and according to the design plans and specifications.
• Manage the commissioning and start-up of electrical systems and equipment, including testing and troubleshooting.
• Provide technical support to the construction team, including addressing technical issues, resolving conflicts, and managing change orders related to electrical systems.
• Review engineering designs and calculations to ensure compliance with all relevant codes, standards, and regulations.
• Any other duties as assigned from time to time.

Job requirement:

• Bachelor's degree in electrical engineering or a related field is required.
• At least 8 years of experience in electrical engineering, with a focus on construction projects. Candidate with less experience will be considered for a junior role.
• In-depth knowledge of electrical systems, including power distribution, lighting, fire alarm, and other related system.
• Strong technical skills, including proficiency in computer-aided design (CAD) software and other relevant tools.
• Excellent communication, organizational, and problem-solving skills.
• Ability to work collaboratively with diverse teams and stakeholders.
• Knowledge of industry codes and standards related to electrical systems.
• Sound knowledge of key Health and Safety issues and legislation.

• Planning, Developing, initiating and managing all phases of projects
• Preparing documentation of critical analysis and providing suggestions for correcting errors
• Collaborating with Project Managers for proper allocation and tracking of resources
• Guiding the workers to do the work properly
• Maintaing the safety in the worksite

Software Development

1. Design, Develop and Maintain device drivers for Windows Operating Systems

2. Undertake WHQL testing and certification of drivers and device frameworks.

3. Design, Develop and Maintain User Libraries and DLLs.

4. Participate in all phases of SDLC and prepare corresponding documentation

5. Undertake porting and maintenance of existing drivers to new frameworks and OS’s

6. Resolve defects reported by internal and external customers

7. Collaborate with USB host & device firmware development teams.

Knowledge and skill requirements:

1. Degree/Master’s in computer science/Engineering or related field.

2. 5 years or above experience in the area of device drivers development, preferably USB

3. In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs

4. Excellent C Programming Skills.

5. Professional attitude to work and meticulous in coding and testing

6. Must have participated and experienced in SQA processes.

Good to have Skills:

1. C++ / .Net / Python Programming Knowledge is a plus.

2. Knowledge of USB2.0 and USB3.0 protocols and USBCV is a plus.

3. Knowledgeable in WinUSB / libusb (Windows or Linux) is plus.

4. Embedded development experience in WinCE, MacOS, Android or Linux is a plus.

5. Experience working with hardware boards, scope and USB analysers is a plus.

To provide reactive preventive maintenance, installation, commisioning and validation service to highly specified sterilization and disinfection equipment.

Duties and Responsibilities:

• Provide preventive maintenance and repair service at customer locations in accordance with Company’s established procedures, techniques, tools, test equipment and replacement parts.
• Installation, commissioning, calibration testing and validation of relevant equipment at customer locations according to Getinge’s protocol.
• Implementing Field Corrective Actions.
• Handling administrative work associated with service delivery.
• Responding to customers’ complaints and providing support for corrective maintenance.
• Meeting key KPIs assigned to you as an individual and of Service department.
• Establish and maintain a professional working relationship with customers and co-workers through teamwork.
• Sharing of knowledge and provide advice to clients and their staff as well as all end-users, on the proper operation and usage of the equipment.

Requirements:

• Candidates with ITE and/or Diploma in Mechanical or Electrical Engineering, Biomed Engineering, or equivalent medical device related educational background are welcome to apply.
• New or more than 1 year of hands-on related experience in medical equipment installation and maintenance.
• Hard working, team player, independent, hands-on, customer oriented and good attitude
• Good presentation and interpersonal skills
• Fluent in both verbal and written English
• Perform all other duties assigned by the Company/ and or Manager

The successful candidate will be part of the sales team. You will represent the company to promote and sell our range of inspection, maintenance and monitoring products and contribute towards achieving our sales and growth targets.

The role requires the successful candidate to actively hunt for opportunities in the market as well as to develop close relationship with existing customers, thereby always having a finger on the pulse of the market. The successful candidate will need to collaborate closely both within the team and with external stakeholders (customers and principals) to identify and deliver the most suitable product and/or solution to the customer.

Remuneration will be commensurate with experience, consisting of a fixed basic salary along with attractive sales commission and transport allowance.

Responsibilities

• To establish strong network and build close rapport with key decision makers and end-users.
• Highly motivated and results-driven in achieving sales target.
• Prospect, develop and drive sales plan.
• Manage sales strategies to improve market shares and profitability of the business.
• Provides competitor information and market intelligence and assist Sales Manager in the development of relevant sales and marketing strategies.

Requirements:

• An enthusiastic team player who can work independently
• “Hunter” instincts, positive mind-set and “can-do” attitude
• Diploma/Higher NITEC or equivalent in any discipline, candidates with Engineering/Technical background will be preferred.
• Fresh graduates are welcomed to apply. Candidates with sales experience will be preferred.
• Good spoken and written English
• Excellent communication and interpersonal skills
• Preferably with own vehicle (Class 3/3A)

Remuneration

• Attractive Basic Monthly Salary commensurate with relevant experience
• Attractive monthly Sales Commission
• Generous transport allowance if possess own vehicle