Position: Senior Broadcasting Engineer / Broadcast Audio Engineer x 2

• Salary: $6,000 - $10,000 + 15 Days AL + Bonus
• 5 Working Days, 9am-6pm
• Changi South (Between Tanah Merah / Simei / Expo MRT)

Requirements:

• Degree or diploma and aptitude relevant to Broadcast Engineering (specializing in Broadcast Engineering / Audio Engineering / IT or any other related area).
• Safety Knowledge: Good knowledge of the principles of safety at work as applied in the TV industry.
• Understanding of OB Systems: Understanding of Outside Broadcast systems and environment.
• Knowledge and experience of operating and troubleshooting a range of OB equipment in sound, communication, IP, etc.
• Minimum 3-8 years of work experience in Outside Broadcast Environment.
• Event Experience: Experience with large scale events is necessary.

Job Scopes: (Before , During & After Project)

• Assist the Engineering Manager with all technical tasks to ensure smooth running of daily engineering operations.
• Review the operations of the Engineering Department to ensure the quality of broadcast operations meet industry standards.
• Remain up-to-date with outdoor broadcast technology and equipment.
• Guide the Assistant / Trainee Engineers to read technical (Auto CAD) engineering drawings and plan for their training where needed.
• Ensure procedure for video equipment testing and preparation is in place.
• Ensure adequate processes are in place for communication / escalation of technical related problems that arise during a project.
• Keep Engineering environment (Warehouse, Engineering Room and desks) clean, functional, safe and presentable.
• Ensure compliance of engineering procedures with Health & Safety guidelines.
• Work with Head of Engineering to improve and test system designs.
• Supervise and schedule maintenance of specific categories of broadcast equipment to ensure the equipment are fully functional and well maintained (internally and externally clean/dust-free).
• Monitor physical and technical quality and appearance of broadcast equipment. Prepare the maintenance & improvement report.
• Plan and maintain a list of specific categories of broadcast equipment which require scheduled maintenance.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Position: Network Engineer [ Broadcasting ]

• Salary: $8,000 - $9,500 + 15 Days AL + Bonus
• 5 Working Days, 9am-6pm
• Changi South (Between Tanah Merah / Simei / Expo MRT)

Requirements:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Minimum of 8 years of experience in network and infrastructure engineering in a broadcast environment.
• Extensive knowledge of networking protocols, including TCP/IP, UDP, RTP, and SMPTE 2022.
• Expertise in managing and maintaining Cisco network equipment, including routers and switches.
• Experience with broadcast technologies, including SDI, AES, and MADI.
• Strong understanding of virtualization technologies, including VMware and Hyper-V.

Essential Duties / Responsibilities:

Purpose: This role will have extensive experience in designing, implementing, and maintaining complex broadcast and IT systems in a live television or broadcast environment.

• Design and implement broadcast network and IT systems, including servers, switches, routers, firewalls, and storage solutions.
• Manage and maintain network and IT systems to ensure optimal performance and reliability.
• Collaborate with other teams to identify and resolve technical issues related to broadcast and IT systems.
• Work with vendors to evaluate and select new technologies and equipment.
• Develop and maintain documentation related to network and IT systems.
• Provide technical training and support to staff as needed.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Micron is seeking a highly motivated and experienced individual contributor to join our Assembly Package Technology Development (TD) team. As a Sr/Engineer in the Process Development team, you will play a crucial role in developing and qualifying new materials, equipment, and wafer tech nodes for Micron's world-class products and devices.

• Primarily responsible for Cleanroom 1 (CR1) Area processes such as Wafer Grinding/ Stealth Dicing/ Laser Groove/ Die Separation/ and Wafer Saw. Cleanroom 2 (CR2) Flip Chip Underfill, Die Attach, and Wirebond
• Development and Qualification of new direct and indirect materials, new equipment, and new wafer tech nodes.
• Ensure product quality and process performance while driving projects focused on cost reduction, productivity improvement, risk mitigation, and resolving manufacturing challenges.
• Collaborate and lead teams from various departments to ensure smooth development transfer to all Micron network sites.
• Familiarize and implement PMI (Product Maturity Index) methodology and provide accurate documentation for product transfer.
• Develop, configure, and optimize Package Assembly processes (Front End, Bonding, and Back End) for Micron's memory products from pathfinding to NPI start-up and certification.
• Collaborate with Design teams globally in the development of assembly design rules, involved in the design approvals (Substrate and Silicon), running, testing and upgrading systems and processes, and approving materials, process, and equipment changes in the CCB (change control board).

Requirements:

• Masters/Bachelor's Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics
• At least 5 years of experience in the semiconductor industry with proven knowledge and skills in assembly
• Excellent problem-solving skills and familiarity with data-driven analysis, statistical analysis, and data interpretation.
• Strong project management skills and ability to multitask to ensure the execution of timelines.
• Strong collaboration skills to work closely with diverse teams and gain insights into business needs and customers' requirements.
• Deep fundamental understanding of key risks in Cleanroom 1 processes and Cleanroom 2 process
• Multiple process capability is a plus

Test Engineer

Our reputable client is looking for a System Test Engineer (IT) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 2 years of System Test experience.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• Support component selection, engineering evaluation, and testing of parts and sub-modules for vision inspection equipment.
• Develop electrical parts and sub-modules for vision inspection equipment.
• Update product design documents, drawings, and BOM (Bill of Materials).

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent.
• At least 2 years of relevant working experience
• Proficient in CAD software for electrical and schematic design, as well as PC hardware, Windows OS, and software.
• Knowledge in PCB/PCBA design, fabrication, and testing processes is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Automation Design Engineer

Job Responsibilities:

• 2D drafting and documentation
• Assist Senior Engineer in:
• Technical assignments (CIP, upgrades, End Of Life)
• Design/development of hardware products
• Evaluation of mechanical/electromechanical devices
• Develop, test, and document designs for:
• Transport mechanisms
• Vacuum systems
• Process stations (deposition chambers, substrate heating/cooling/cleaning)
• Participate in detailed product design
• Provide mechanical design inputs for design review (DFM, DFA)
• Prepare/release 3D Solid Models and Engineering drawings
• Communicate with local vendors for design parts/assemblies delivery
• Perform other related duties as assigned

Requirements:

• Higher NITEC (3-8 yrs exp) / Diploma (2-5 yrs exp) from reputable polytechnic / Bachelor's Degree (2 yrs exp) in Mechanical/Mechatronics Engineering
• Proficient in Solidworks (3D/2D design)
• Knowledge of Orcad or similar software (advantage)
• Experience in Machine Design (Semiconductor/Solar Equipment Design advantageous)
• Familiarity with Design Process (feasibility study to production realization)
• Knowledge of ECO release of Engineering quality documentation
• Experience in dynamic electromechanical system design
• High vacuum design and heat transfer experience (advantageous)

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

• Singapore Based (Changi South - Between Tanah Merah / Simei / Expo MRT)
• 5 Working Days, 9am-6pm
• Salary: $8,000 - $9,500 + 15 Days AL + Bonus
• Bachelor's degree in Computer Science, Information Technology, or a related field; Minimum of 8 years of experience in network and infrastructure engineering in a broadcast environment
• Career Progression Opportunities

Essential Duties / Responsibilities:

Purpose: This role will have extensive experience in designing, implementing, and maintaining complex broadcast and IT systems in a live television or broadcast environment.

• Design and implement broadcast network and IT systems, including servers, switches, routers, firewalls, and storage solutions.
• Manage and maintain network and IT systems to ensure optimal performance and reliability.
• Collaborate with other teams to identify and resolve technical issues related to broadcast and IT systems.
• Work with vendors to evaluate and select new technologies and equipment.
• Develop and maintain documentation related to network and IT systems.
• Provide technical training and support to staff as needed.

Requirements:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Minimum of 8 years of experience in network and infrastructure engineering in a broadcast environment.
• Extensive knowledge of networking protocols, including TCP/IP, UDP, RTP, and SMPTE 2022.
• Expertise in managing and maintaining Cisco network equipment, including routers and switches.
• Experience with broadcast technologies, including SDI, AES, and MADI.
• Strong understanding of virtualization technologies, including VMware and Hyper-V.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Project Engineer – Civil & Structural

This role will be positioned on a construction site; 50% working on CAD layout and temporary works design concept sketches and 50% site construction supervision and associated activities.

Job Responsibilities

1. Report and assist Construction Manager (CM) on project functions included but not limited to project site coordination, risk control management etc. to meet the project(s) goals.
2. Assist CM in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
3. Prepare CAD drawings for site layout plans, temporary works concept sketches and liaise with design consultants to coordinate temporary works designs.
4. Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
5. To supervise the execution of the construction works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract documents.
6. To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
7. Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist Contract department (QS) in verifying progress payments and claims from Contractors.
8. Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
9. Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.

Job Requirements

• Bachelor Degree in Civil Engineering (may also consider Draftsperson with strong construction site and temporary works background).
• 5 years experience in site work including temporary works, piling, excavation, civil & RC structure works, coordination with authorities etc
• Strong analytical and critical thinking skills applied to planning for construction works,
• AutoCAD proficiency and ability to draw site and temporary works sketches,
• Good negotiation, communication and stakeholder management skills;
• Resourceful, independent and able to work in a fast-paced environment.
• Additional skills in Microsoft Project is advantageous.

Responsibilities

• Provide analysis and dispositions on non-conformance products in accordance to requirements
• Perform inspection and verification (visually or using measuring tools) on product on hold due to quality issues
• Work closely with supervisor & team to monitor project status and closures (team coordination)
• Communicate with customers status of quality projects assigned to his/her area of responsibility
• Prepare regular reports and meet submission deadlines (weekly, monthly)
• Actively participates with internal team projects analysis

Requirements

• Degree in Electronics or Engineering or related field with relevant experience in electronics / semiconductor / or other manufacturing industry
• Entry level candidates are welcome to apply
• Basic knowledge in Microsoft Office (Word, Excel, PowerPoint)
• Team player with good written / verbal communication and interpersonal skills
• Strong sense of urgency with ability to meet deadlines and work independently
• Knowledge in basic manufacturing solving problem tools (8D, FMEA) and statistical tools (SPC) is an advantage.
• Highly motivated to learn new skills / systems / analytical tools used in manufacturing operations

Responsibilities and Tasks:

• Responsibilities and Tasks:
• Drive system improvements and assist with projects related to various MES applications
• Drive global alignment of Best Known Methods for system setup, for both Traveler and Process Control
• Work on projects that optimize MES system setup
• As the application owner, deliver training and provide feedback to the team on any trouble shooting or problem solutions
• Deliver software system enhancement, training, updates, and upgrades
• Provide automation solution for continuous systems and productivity improvements

Requirements ;

• Masters/Bachelors in any engineering disciplines

Qualifications

• Excellent verbal and written communication skills and the ability to present data in large meetings
  
• Proven ability to coordinate efforts across a variety of groups.
  
• Working knowledge of Fab processing
  
• Strong data analysis and computer skills
  
• Proven ability to utilize programming tools (C++, SQL, Python, R, Visual Studio) a plus
  
• Proven ability to organize and prioritize multiple tasks effectively
  
• Proven ability to make sound, informed decisions
  
• Proven ability to lead and coordinate meetings
  

Based in Singapore, the iOS Software Engineer is responsible in developing native applications of Screening Eagle and Proceq tools - ensuring robust, user friendly and easy to maintain applications.

What will you do

• Develop new user-facing features;
• Translate designs into high quality code;
• Optimise components for maximum performance;
• Explore and apply the latest technologies;
• Motivate team members and give constructive advice.

What do we expect

Basic Qualifications

• BA/BS Degree in Computer Science or equivalent practical experiences;
• 3+ years programming experience in iOS, and less experienced candidates will be considered for junior roles;
• Proficient with debugging runtime issues and performance optimisations;
• Proficient with writing unit tests using XCTest framework;
• Experience with Git version control system;
• Familiar with continuous integration & deployment system (CI/CD).

Preferred Qualifications

• Deep understanding in various design patters and architectures;
• Know how to optimize code using various techniques;
• Full stack skills (also know backend and web etc.);
• Know computer vision, data science, machine learning and natural language processing;
• Have personal projects at GitHub with 100+ stars;
• Experienced in coaching junior developers;
• Experienced in open source projects.

With a vision of making an impact on Asia’s healthcare landscape and an aim to push healthcare beyond current times, Speedoc is passionate about making healthcare more convenient, accessible, and affordable to all. This is done by providing a full suite of tech-enabled healthcare services on demand including doctors, nurses, allied care professionals, ambulances, and medication delivery across Singapore and Malaysia.

Speedoc is an innovative healthcare start-up that is entrusted by brands and agencies including the Ministry of Health, and Temasek Holdings as a partner to deliver projects in public health. Speedoc positions itself at the forefront as the market leader in the digital healthcare landscape and the team constantly identifies opportunities for growth, improvement, and game-changing initiatives that can be implemented in our ever-expanding product roadmap.

With 3 engines of growth across B2G, B2B, and B2C, we are seeking a highly independent talent to join our team.

Job Responsibilities

In this role, you will work on end-to-end data projects (from source to pipeline to dashboard) and become a subject matter expert on data. You will get exposed to multiple facets of a healthtech startup by working with stakeholders across different teams (such as marketing, finance, operations, product) to understand business challenges, build data solutions, discover actionable insights and make recommendations to drive the company’s growth.

The Data team within Engineering is a lean team. You will get to initiate and lead your own projects to derive data-driven insights for stakeholders from cross-functional teams.

Responsibilities:

• Business Insights: understand business models and apply data analytics methods to formulate actionable insights and recommendations.
• Stakeholder Partnership: collaborate with stakeholders to understand business needs and requirements, perform data-driven analysis to value-add stakeholder decision making.
• Analytical Modeling: formulate models for segmentation, prediction and forecasting.
• Presenting Data and Insights: create dashboards, visualizations and presentations to aid and advance decision making.
• Data Excellence: build data pipelines, maintain data warehouse, troubleshoot data quality issues, and contribute to overall data strategy

We're looking for:

• Problem solvers with intellectual curiosity
• Ability to work independently and take initiative and ownership of projects
• Ability to learn quickly and juggle multiple tasks in a fast-paced environment
• Strong written, verbal and interpersonal communication skills to collaborate with both technical and non-technical teams
• Strong business mindset and ability to grasp business requirements from stakeholders

Senior Equipment Engineer

Yishun, Singapore

Who We Are:

Lumileds is a global leader in OEM and aftermarket automotive lighting and accessories, camera flash for mobile devices, MicroLED, and light sources for general illumination, horticulture, and human-centric lighting. Our approximately 5,500 employees operate in over 30 countries and partner with our customers to deliver never before possible solutions for lighting, safety, and well-being.

The Lumileds environment is fast-paced, cutting-edge, intelligent and fun! We are looking for exceptional talent to join our team! To learn more about our company and solution portfolios, please visit https://lumileds.com

Who You Are:

Dynamic, energetic, able to work in an organization within a department and cross-functions

Position Summary:

Lumileds is seeking a highly-qualified Engineer to take responsibility for Equipment ownership, ensuring equipment indices like MTBF, MTTR, uptime are met. Work with process and industrial engineers and Manufacturing to address issues pertaining to hardware. Work with vendors on equipment retrofit, upgrades and CIP.

What You Will Do:

• Equipment owner for PVD (Sputtering or evaporation) tool of Thermal Processing (Furnace or Rapid Thermal Process) tool.
• Drive equipment fault investigations and continuous improvement programs to resolve chronic equipment issues, and implement permanent resolutions to assure product quality and enhance process robustness.
• Maintain optimum utilization of equipment and resources, drive MTBF, MTTR and increase equipment throughput.
• Establish equipment maintenance controls, review and perform regular update of PM procedures, Risks Assessments and Troubleshooting guidelines.
• Perform simple modification on PVD (Sputter or Evaporator) or Thermal processing (Furnace or RTP) production equipment to improve machine efficiency and reliability.
• Work with Equipment Supplier for tool retrofit and to resolve equipment issue
• Drive cost reduction to weed out unwarranted expenses/wastages and improve equipment performance.
• Work on projects to establish alternate supplier to reduce cost.
• Establish sufficient essential spares and consumables stock levels to support equipment maintenance.
• Lead and guide shift technicians on all equipment maintenance. Provide effective equipment trainings to the technicians to build up their technical competencies.
• Perform other duties as assigned by the manager. Duties will vary according to the project progress and/or the specific goals of the module.

What You Will Bring (REQUIRED Qualifications):

• 5 years’ working experience in wafer fabrication industry.
• Hands-on experience working on PVD (sputter/evaporation) or Thermal Annealing/Diffusion tools is required.
• Candidate with strong vacuum and plasma technical knowledge or has similar working experience in equipment maintenance is welcome to apply.

Education (Minimum Level)

· Bachelor's

Field of Study

Engineering (Electrical/Electronics, Material Sciences, Mechanical or equivalent

Years of Experience (Minimum)

· 5 - 7 years

Lumileds is an Equal Employment Opportunity Employer

Requirement:

1. Minimum Diploma in Mechanical Engineering or related qualification.
2. Minimum 1 years of working experience in Facilities maintenance.

Job Responsibilities:

• Coordinate, sponsor and supervise contract service provider to performance work activities
• Adhere to company’s environmental safety health policy and procedure, standard operating procedure with risk assessment, housekeeping and quality
• Plan, schedule and perform Preventive and Corrective Maintenance work activities on mechanical equipment and system
• Troubleshoot and attend to abnormalities in support of Operations in a timely manner
• Participate in mechanical equipment and system abnormalities root cause analysis, then execute corrective and preventive action for continual improvement, this includes installation and modification work on existing or new mechanical system.
• Utilize computer base software to document record of work order and equipment history.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R22090617 | Zhao Zi Yuan (Anna)

Job Responsibilities:

· Assume responsibility for technical assignments involving basic or applied research or the design and development of Electrical hardware products. Includes design, fabrication, modification and evaluation of electromechanical devices, components or systems.

· Devise initial concept of assigned device, component or system and participate in the overall detailed Electrical perspective of product design.

· Creates original hardware, circuits, components, software, processes, and models to prove the feasibility of the design approach being investigated. Inclusive of Electronics and PCBA

· Participate in design review by providing inputs relating to DFM and DFA, etc.

· Prepare and release Engineering drawings/schematics while communicating to local vendors to expedite delivery of design parts and assemblies.

· ECO release of engineering documentation.

· Design of AC/DC power distribution systems including selection of circuit breakers, power supplies, contactors and cabling harnesses. Knowledge of PCBA Design, component selection and trouble shooting.

· Develop, test and document designs

· Develops estimates for products and projects. Power consumption, weight, size and schedule.

· Coordinates with manufacturing during pilot run and first production runs to ensure efficient transition from engineering into production.

· Interface effectively with customer to understand technical requirements and propose quality solutions.

· Possesses good electrical troubleshooting skills, and is able to troubleshoot at customer sites.

· Interfaces effectively with other organization such as Purchasing, Marketing, Service, and Quality Assurance as needed to carry out responsibilities

· Assists engineering management in developing schedules and specifications for new and legacy products.

· Maintains a high level of technical competence and state-of-the-art awareness.

· Directs engineering and technical support personnel as required.

· Maintains a high level of technical competence and state-of-the-art awareness.

· Performs other related duties as assigned.

Requirements:

· Bachelor’s Degree plus 6 years’ Experience or Masters Degree with 3 years’ Experience in Electrical/Electronics/Mechatronics Engineering

· Working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.

· Experience working on dynamic electromechanical system design

· Proficient user of orcad, autocad, pcad, Solidworks or similar 3D CAD Software

· Design knowledge on NFPA, Semi Safety Requirements, and Machine safety.

· Good command of written and verbal English

· Possess good communication skills.

Job Description

• Assist Project Manager with coordinating, planning, and forecasting to optimize utilization of resources to fulfil budgetary and project milestones
• Perform site study for PV system recommendation
• Manage solar project site team to ensure compliance with safety standards.
• Monitor site work progress to ensure projects conform to specifications, schedules, and budgets
• Plan and prepare Bill of Materials (BOM) for projects.
• Coordination with procurement team to raise sales request and ensure timely delivery of materials
• Create checklists for review or inspection of solar projects.
• Assist in Investigation and troubleshooting of M&E issues during and post project implementation in coordination with clients, contractors, other stakeholders
• Assist LEW with site testing and inspection of installation.
• Assist Design and draft electrical single-line diagram (SLD), solar module layout and string-connection drawings for using AUTOCAD software.
• Assist Design and draft mechanical drawing of solar PV systems
• Prepare project documents for submission to authority and ensure smooth delivery of the project completion
• Assist with ad-hoc duties as assigned

Job Requirements

• Fresh Graduates are welcome. On job training provided.
• Diploma in Mechanical or Electrical Engineering or other related discipline preferred
• Knowledge in AutoCAD, Solidworks, and other modelling software (like sketchup, PVsyst, Helioscope) is an advantage.
• Ability to work independently and handle multiple projects concurrently
• Prefer to possess Class 3 driving license (Manual)
• Detailed Oriented

If interested, Email CV to [email protected].

1. Lead and manage a team of software engineers, providing technical guidance and mentorship.

2. Develop and implement strategic plans for mini program development, aligning with company goals.

3. Collaborate with cross-functional teams (Product, Design, QA) to define product requirements.

4. Design and architect scalable, efficient, and secure mini program solutions.

5. Oversee the development process, ensuring timely delivery and quality standards.

6. Foster innovation, exploring new technologies and trends in mini program development.

7. Manage budgets, resources, and vendor relationships.

8. Ensure compliance with industry standards, regulations, and company policies.

Requirements:

1. Bachelor's/Master's degree in Computer Science, Software Engineering, or related field.

2. 10+ years of experience in software development, with 5+ years in a leadership role.

3. Proficiency in programming languages (e.g., Java, Python, JavaScript).

4. Experience with mini program development frameworks (e.g., WeChat Mini Program, Alipay Mini Program).

5. Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud).

6. Knowledge of agile development methodologies.

Responsibilities:

• Performs and lead in project testing and commissioning.
• Ensure the system as designed and built and meet the specific requirements.
• Conduct customer training and ensure customer acceptance of the system.

Requirement:

• Diploma/Higher NITEC/NITEC in Electrical Engeering or Facility technology (Mechanical & Electrical Services).
• Possess class 3 driving license.
• Entry level candidates may apply and training will be provided.
• Applicant with experience in the construction industry - Fire Protection will be an advantage.

Job Title: Desktop Engineer (Mandarin-speaking)

Location: Tuas, Singapore

Job Type: Full-time

About Us: Techedge Solution, a leading IT Staffing & Data centre solutions provider, seeks an experienced and skilled Desktop Engineer to join our IT team.

Job Summary:

We are looking for a highly skilled and customer-focused Desktop Engineer to provide technical support for our desktop infrastructure. The ideal candidate will have excellent problem-solving skills, strong communication skills in Mandarin, and experience working in a fast-paced environment.

Responsibilities:

• Provide level 2 technical support for desktop-related issues
• Install, configure, and troubleshoot desktop hardware, software, and peripherals
• Manage and maintain desktop images, group policies, and software updates
• Troubleshoot and resolve issues related to Microsoft Office, Windows, and other applications
• Collaborate with IT team members to resolve technical issues
• Communicate technical information effectively to non-technical stakeholders
• Conduct hardware and software inventory management
• Perform routine maintenance and upgrades
• Adhere to IT security policies and procedures

Requirements:

• Diploma or Degree in Computer Science/Information Technology
• 2+ years of experience in desktop support/engineering
• Proficient in Windows, Microsoft Office, and desktop hardware
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal skills (Mandarin-speaking)
• Ability to work independently and as part of a team
• Familiarity with ITIL framework (desirable)

Nice to Have:

• Certification in CompTIA A+, Microsoft MCSA, or equivalent
• Experience with desktop management tools (e.g., SCCM)
• Knowledge of IT security best practices

Working Hours:

• Monday to Friday, 9:30 am - 6:00 pm

What We Offer:

• Competitive salary
• Comprehensive benefits package
• Opportunities for professional growth and development

How to Apply:

If you're a motivated and tech-savvy individual with excellent Mandarin communication skills, please submit your resume to [email protected] We look forward to hearing from you!

Job Summary:

The Lead Electrical Engineer will be responsible for the design, development, and management of electrical systems for FPSO projects. This role involves leading a team of engineers, ensuring the safe and efficient design and operation of electrical systems including power generation, distribution, and control systems on FPSO vessels. The Lead Electrical Engineer will ensure all work complies with project specifications, industry standards, and safety regulations.

Key Responsibilities:

• Lead the electrical engineering design for FPSO projects, including power generation, distribution, control, and communication systems.
• Ensure compliance with industry standards (IEC, IEEE, NEC), client specifications, and regulatory requirements (ABS, DNV, Lloyd’s Register).
• Supervise the selection, specification, and installation of electrical equipment such as transformers, switchgear, motors, generators, and lighting systems.
• Collaborate with multidisciplinary teams (process, instrumentation, mechanical) to ensure seamless integration of electrical systems into overall FPSO operations.
• Review and approve electrical design documentation, including drawings, calculations, data sheets, and technical specifications.
• Oversee the testing, commissioning, and troubleshooting of electrical systems, ensuring optimal functionality and safety.
• Develop and implement electrical system maintenance strategies for FPSO operations to ensure long-term asset integrity.
• Manage electrical engineering teams, including mentoring junior engineers and ensuring efficient resource allocation.
• Conduct risk assessments and ensure all electrical systems adhere to HSE (Health, Safety, and Environment) guidelines and safety standards.
• Liaise with external stakeholders, including clients, vendors, and regulatory bodies, to ensure compliance with project objectives.
• Provide technical support during the construction, installation, and commissioning phases of FPSO projects.
• Stay updated with technological advancements in electrical systems and apply innovative solutions to improve performance and efficiency.

Qualifications:

• Bachelor’s degree in Electrical Engineering or related field (Master’s preferred).
• A minimum of 10 years of experience in electrical engineering, with at least 5 years in a lead role, preferably within the oil and gas industry and FPSO projects.
• Strong knowledge of FPSO electrical systems, including high-voltage and low-voltage systems, power distribution, and control systems.
• Proficiency with electrical engineering software (e.g., ETAP, AutoCAD, or similar tools).
• Familiarity with international standards (IEC, IEEE, NEC) and classification society rules (ABS, DNV, Lloyd’s Register).
• Strong leadership, communication, and project management skills.
• Excellent problem-solving abilities, with experience in troubleshooting complex electrical issues in offshore environments.

Job Responsibilities:

1. Manage on going project, electrical work, testing & commisioning.

2. Site walk and prepare quotation.

3. Project execution, schedule planning, material preparation.

4. Manage site installation team.

5. Attend client meeting and reporting.

Requirement;

1. Minimum Diploma in electrical, automation.

2. Have experince in contruction semi conductor sector.

3. Willing to work on emergency schedule.

Technical Engineer provides innovative solutions in ACMV industry. This person must be a highly skilled problem-solver who has the business knowledge and technological expertise to implement strategies, evaluate processes, and build upon an infrastructure that supports the ever-changing needs of customers. In this role, the technical engineer will work with complex systems, designing, developing, and integrating them at every stage of a project lifecycle. The ideal candidate can reliably deliver mission-critical solutions that boost accessibility, optimization, and security.

Roles and Responsibilities

• Participate and perform on site testing and commissioning for ACMV system.
• Participate and perform Integration testing and commissioning,
• Coordination of internal resources and external partners (contractors) and clients for testing.
• Provide information by collecting, analyzing, and summarizing tests results and issues.
• Support or lead Investigation activities for the problem areas
• Improve operations by conducting analysis and recommending changes in policies and procedures
• Protect operations by keeping information confidential.
• Have strong negotiation, conversational and relationship skills to manage resources, and clients.

Requirements

• Diploma / Bachelor's Degree in Mechanical Engineering or related field,
• At least 3 years of desired knowledge and/or experience - Proven working experience in T&C in ACMV
• Good knowledge of T&C processes and electrical equipment

TikTok will be prioritizing applicants who have a current right to work in Singapore, and do not require TikTok sponsorship of a visa.

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

Team Introduction

As part of Solutions Engineering org, SE Partnerships team is focusing on Global Partnerships and Agencies to facilitate meaningful connections between brands/advertisers and partners/agencies through technology at scale and help businesses grow on TikTok.

We believe the services and community we've built can not only transform how people are inspired on the platform, but also transform how businesses from different industries, big or small, capture growth opportunities in this new era. TikTok is building out our Solutions Engineering team to help our external clients and partners to thrive on this journey. As a Solutions Engineer, you will not only have the opportunity to identify and solve challenges by architecting and building solutions but, more importantly, prioritize client success and work cross-functionally to help them reach their business objectives.

Responsibilities

- Develop and maintain relationships with key strategic partners and agencies; build trust through your deep technical expertise of their platforms and customer needs.  

- Collaborate cross-functionally with Partnerships and/or Agency Leads and Product teams to develop, manage and grow partner relationships with a focus on technical aspects (i.e. technical presentations, trainings, consultations, integration guides, and best practices).  

- Be an expert on TikTok's API capabilities and partner offerings from technical lens. Advocate for API improvements and influence product roadmap with internal product teams to solve business challenges.

- Build and ship new products as well as end-to-end integrations in collaboration with Ads product engineering teams. 

- Maintain subject matter expertise on marketing technology and API trends. 

Minimum Qualifications

Bachelor's degree or above, majoring in Computer Science or related fields.

- 3+ years of experience shipping production quality code

- Familiar with one or more general purpose programming languages including but not limited to: Python, Go, Java, C/C++.

- Ability to effectively communicate technical concepts to non-technical audiences.

- Ability to collaborate with various sized stakeholder groups internally and externally.

- Demonstrated knowledge of API and backend systems design.

Preferred Qualifications

- Experience in advertising technology working with large volume data analytics.

- Solutions-oriented with strong problem-solving and development experience

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Title: Assistant Air-Conditioning/Refrigeration Engineer
Company: PROMACH PTE. LTD.
Location: Singapore
Employment Type: Full-Time

About the Role:

PROMACH PTE. LTD. is seeking an experienced Assistant Air-Conditioning/Refrigeration Engineer with at least 1 year of experience to join our team. This role involves working closely with site supervisors, contractors, and clients to ensure the successful execution of air-conditioning and refrigeration projects. Candidates who can acquire new projects will have an added advantage.

Key Responsibilities:

• Co-ordinate job activities at the site, ensuring that all work is carried out according to the project plan.
• Assist Site Supervisors in managing daily operations, ensuring tasks are completed on schedule.
• Manage contractors and subcontractors to ensure smooth collaboration and adherence to project requirements.
• Ensure smooth and effective communication with clients, addressing any queries or concerns promptly.
• Provide regular updates and reports on project progress to management and clients.
• Support the implementation of M&E systems at project sites.
• Acquire new projects and business opportunities for the company (added advantage).

Requirements:

• Minimum of 1 year of experience in air-conditioning and refrigeration systems.
• ITE, Diploma, or Degree in Mechanical, Electrical, or related Engineering fields.
• Able to understanding of HVAC systems, job site coordination, and client management.
• Ability to manage contractors and ensure project deadlines are met.
• Strong organizational and communication skills, especially in handling client interactions.
• Proficiency in Microsoft Office (Word, Excel) is a plus.
• Ability to acquire new projects will be considered an added advantage.

What We Offer:

• Opportunities for career growth and development.
• Competitive salary package based on experience.
• Supportive and collaborative work environment.
• Hands-on experience with diverse projects in the air-conditioning and refrigeration industry.

Key Responsibilities:

• Test Strategy & Planning:Design and develop effective test strategies, ensuring thorough coverage of functional, non-functional, and regulatory requirements.
  Collaborate with developers, product managers, and business analysts to clarify requirements and ensure testability.
  
• Automation & Continuous Testing:Develop, maintain, and optimize automated test suites for high-performance trading applications and systems.
  Promote and implement continuous testing and integration practices to support rapid delivery cycles.
  
• Performance & Security Testing:Perform performance testing to assess system behavior under real-world trading conditions, ensuring stability and scalability.
  Collaborate with security teams to ensure trading systems comply with the latest security protocols and standards.
  
• Manual Testing & Defect Management:Execute detailed manual testing for complex features, exploratory tests, and trading workflows where automation is less feasible.
  Identify, track, and prioritize bugs, working with developers to ensure timely resolution.
  
• Mentorship & Leadership:Mentor junior test engineers, sharing your expertise and promoting best practices.
  Provide input on improving testing processes and tools to enhance efficiency and quality.
  

Qualifications:

• Proven experience (5+ years) in software testing, particularly within trading, financial services, or similar industries.
• Strong understanding of trading systems, including order execution, market data, and risk management.
• Hands-on experience with test automation tools such as Selenium, JUnit, TestNG, or similar frameworks.
• Familiarity with API testing, continuous integration (CI) tools, and performance testing methodologies.
• Strong communication skills, with the ability to collaborate effectively with diverse teams.
• An analytical mindset with excellent problem-solving skills and attention to detail.