Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

Develop electronic systems for spacecraft, including satellites.

The tasks for this role include:

1. Building electronic circuits to control motors, magnetorquers and solenoid valves

2. Embedding microcontrollers into the electronics circuit and programming the microcontroller to be able to communicate with the central satellite computer; this includes implementing interfaces such as CAN, I2C, and SPI

3. Building circuits for voltage conversion and current sensing

4. Building circuitry to interface with sensors such as fine sun sensors, coarse sun sensors, magnetometers, GNSS receivers and gyroscopes

5. Rigorous testing and verification of circuits

6. Choosing the appropriate PCB fabrication class

7. Design for mass production, including an understanding of working with suppliers from around the world, to enable us to work at the speed of light (or whatever is found to be faster...)

Qualifications & Experience

You must have developed full electronic systems, all the way from conception to a functional physical system. You will need to show us the projects in your portfolio.

Person & Environment

1. We seriously value working harmoniously together. If you are a lone wolf do not apply, even if you have the skills.

2. We work with items that go to outer space, so we expect a slightly higher level of cleanliness than may be the norm at other engineering companies.

Benefits

1. Great compensation. Pay is in cash and equity (!)

2. You'll be involved in engineering systems that enable a complete reimagination of humanity's place in the universe. We are working towards buiding systems that signficantly increase the number and type of space missions, and truly enable solar system-wide exploration.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Overview

In collaboration between Singapore Airlines (2023 World's Best Airline*) and the National University of Singapore (Top 10 universities globally*), the SIA-NUS Digital Aviation Corp Lab was established, with support from the National Research Foundation, Singapore. SIA-NUS Digital Aviation Corp Lab aims to create innovative technologies that accelerate digital transformation, redefine air travel, and enhance safety and security.

We are seeking a highly motivated and skilled Research Engineer to join our team in the field of Virtual/Augmented Reality (VR/AR) and Large Language Models (LLMs) for Pilot Simulation Training. This position offers an exciting opportunity to contribute to cutting-edge research and development in the aviation industry, with a focus on leveraging VR/AR and LLM technologies for pilot competency based simulation training.

Responsibilities

• Conduct research on the application of VR/AR and Large Language Models in pilot simulation training, aiming to enhance realism, interactivity, and instructional effectiveness.
• Collaborate with a multidisciplinary team of engineers, data scientists, and aviation experts to define research objectives and develop innovative approaches for integrating VR/AR and LLM technologies into pilot training simulations.
• Design and develop VR/AR-based training environments that utilize LLMs to generate dynamic and realistic dialogue interactions for pilot-instructor communication, scenario-based training, and decision-making exercises.
• Conduct usability studies. Collect and analyze data from VR/AR simulations and pilot training scenarios to evaluate the effectiveness and performance of the simulation modalities.
• Provide guidance and mentorship to junior researchers, graduate and undergraduate students, or research assistants. Publish research findings in prestigious journals and present at conferences and industry events to contribute to the scientific community and promote advancements in VR/AR, LLMs and pilot simulation training.

Requirements

• Bachelor degree in Computer Science, Electrical and Computer Engineering or a related field, with a focus on VR/AR, Natural Language Processing, or Human-Computer Interaction.
• Strong background and research experience in VR/AR, Large Language Models, or related fields, demonstrated through high-quality publications in reputable conferences or journals.
• Proficiency in programming languages commonly used in VR/AR and LLM research, such as Python, C++/C#, or Unity.
• Experience with VR/AR hardware and software platforms.
• Familiarity with state-of-the-art Large Language Models, such as GPT-4 or similar architectures, and their applications in natural language processing tasks.
• Strong analytical and problem-solving skills, with the ability to think creatively and develop innovative solutions.
• Excellent communication skills, both written and verbal, to effectively convey research findings and collaborate with cross-functional teams.

Join our dynamic and innovative team, where you will have the opportunity to revolutionize pilot simulation training using VR/AR and Large Language Models.

* Singapore Airlines has been named Airline of the Year at the Skytrax World Airline Awards 2023. NUS ranks eighth in the world (first in Asia) in the Quacquarelli Symonds (QS) World University Rankings (WUR) 2024.

Job Purpose:

- Responsible for developing activities, within the I&C discipline, focusing on long term strategies, governance of technical guidelines, projects and action plans. This includes evaluation and identifications of improvements on business value, compliance and technical safety in order for the fleet performance improvement considering best practices in all MODEC Group shared as common practices as well as to promote research and development.

Core Responsibilities:

Contribute to continuous improvement of IMS by following and filling in projects status, updating and monitoring implementation of IMS documnets under I&C discipline.

Support MdB`s corporate annual budget planning for E& I&C coordination by providng information based on previuos experiences,technical knowledge and best practices in the market.

Contribute to MODEC`s participation in biddings of project by supporting preparation / develpment together with MOPS/MII/MINC/Pre Ops Team by bringing technical and operational experiences to new project in develpment.

Ensure knowledge management, which includes mjonitoring its starts, actions taken, knowledge database maintenance, as well as auditing inclusion of forms in the system by sharing lessons learned among MODEC Ops Fleet and subsidary company, being responsible for exteacting and listing up all lessons learned from operations experience and evaluating and reviewing feedbacks in MIMS.

Ensure technical support to Tier 2 Reliability for specific case to be defined by proper procedure(boundary scope) by responding to MOCs. TQs, RCAs, CAPA , NOI and safety studies recommendations upon request anddeveloping recommendations/solutions when necessary.

Contribute fordeveloping and maintaining Global Design Philosophy & Functinal Specifications by reviewing and or updating each assigned documents.

Develop and improve all the technical / business lifecycle guide/process/procedures from BID, EPCI, Pre Ops, operation, maintenance and decommissioning, by actively particiapting on all phase of projects, constantly monitoring and analyzing all standards and guideline defined for the I&C discpline, as well as proposing and elaborating actions plans for the technical Recommendations received from other Tiers.

Maximize business life cycle value and ensure fleet performance improvement by developing and researching new technologies, controllling KPI`s results, monitoring the resoulution of issues related to the I&C discipline and deceloping actions plans of continouous improvement through systematic approach and methodology following MODEC technical philosophy.

Qualifications and Requirements:

Bach degree in Engineering is required

Masters Degree / Post grad in areas related to discipline of expertise has an addtional advantage.

CREA certifications is required.

Minium 7 years of overall experiences in Offshore / onshore Oil&Gass area is required.

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

· Recipe creation and optimisation for new R&D applications requirement.
- Preventive and corrective maintenance planning cum execution and vendor management.

· To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up

· Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).

· To set-up appropriate process and product control plan and out of control action plans (OCAP)

· Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

· Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering

· Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)

· Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)

· Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

Job Description

Key Roles and Responsibilities:

• Design relatively complex managed service solutions to meet client requirements by integrating technology and service design across the network technology domain
• Conduct sales presentations, product demonstrations, installation, and maintenance of company products.
• Design the Managed Service offering, interfacing with the platform delivery team.
• Test and validate new designs features and delivery models or recommend improving existing service offers that is being taken to market
• Responsible for the service design deliverables of the solution, working with internal teams and partners to ensure supportability.
• Support the validation processes by obtaining sign-off from technical, service, and costing stakeholders.
• Service design of solutions for the client that will be commercially competitive whilst mitigating risk.
• Map the client's requirements against the proposed set of service elements and architectures and coordinate the end-to-end solution development (Network).
• Execute a consulting approach that results in a consolidated statement of requirements, scope, transition documents, and costing based need for change, the role of IT, definition of the AS-IS versus desired state (Future Mode of operation defined), gap analysis, and roadmap, highlighted impacts, consequences, and benefits of the intended transformation (people, process, technology).
• Assist the sales teams in presenting an architecture solution to clients with a focus on cost savings or uncovering other client growth opportunities using the ability to discover and analyze the client’s current network architecture, platforms, and operating models
• Share client outcomes and market conditions with other stakeholders so that the global offering leads, and Managed Services community can evolve strategies and develop innovative solutions for the future
• Coach, mentor and act as advisor in service design situations
• Assist the sales teams to have a commercial model discussion with the client
• Identify all service costs and populate cost models accurately to ensure full visibility of costs related to the delivery of the service over the contract term
• Create and get sign-off from relevant stakeholders on the solution design that will form part of the commercial model
• Assist with vendor management depending on the service offers and ensures that the transition to service delivery teams are well coordinated to ensure a smooth transition

Knowledge, Skills and Attributes:

• Working knowledge of Managed Services service and delivery models, including cloud, global, and distributed delivery models
• Comfortable working with costing models in partnership with sales and finance stakeholders
• Proficiency in Network/Infrastructure Managed Services
• Ability to communicate potential improvements and value of our solutions to all levels of stakeholders; including C-suite decision-makers
• Ability to work within a team, contributing to the success of the team while making a personal contribution; especially in a matrixed organisation
• Up to date knowledge on emerging trends in technology, Managed Services Integration, Network, etc
• Analytical skills and ability to discover and analyze all input and data

Academic Qualifications and Certifications:

• Tertiary level – bachelor’s; or post-graduate degree with experience in a consulting capacity
• Certification and working knowledge of ITIL, Service Management and Integration, Automation Artificial Intelligence and Analytics
• Scaled Agile certification or equivalent

Required Experience:

• Track record of designing network managed services solutions to large enterprise accounts
• Proof of structuring large, multi-year profitable contracts
• Solution planning and deal shaping technical specialist, with the ability to create compelling value propositions as part of the solution design
• Seasoned experience working in an environment with global delivery and in multiple geographies and industries

Deskside/Desktop Support Engineer

We are looking for experienced junior and senior full-time deskside engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Background

Thales people architect solutions that are relied upon to deliver operational advantage at every decisive moment throughout the mission. Defence and armed forces customers rely on us to deliver the full range of defensive systems for land, sea, and air. From early warning, to threat neutralisation, our platforms cover all levels from very short-range systems, to extended protection across the entire battle-space including Airspace Mobility Solutions, Vehicles and Tactical Systems and Missile Defence, Optronics, and Radar.

Air Mobility Solutions provides leading edge airspace control and security solutions for the commercial and defence sectors.

Thales's advanced LORADS air traffic management system ensures the safety of operators and passengers at a time when soaring growth in air traffic poses a range of complex technical challenges.

Technologies supplied by the Air Mobility Solutions global centre of excellence, based in Singapore, are currently deployed in Singapore and across Asia and the Pacific region.

Thales Australia's air traffic control systems are in use in over 50 countries including Australia, Mexico, South Africa, China, Singapore and Thailand.

Purpose:

The Cyber Security Engineering position is within Airspace Mobility Solutions in Singapore to contribute, but not limited to the LORADS and Topsky-ATC HE projects managed and supported from Singapore.

The position includes the following main responsibilities:

• To undertake security engineering and architecture activities as per budget and aligned with contract and strategy set by the System Cyber Security Engineering Lead.
• To define security solution and associated estimates for specific work packages and bids activities, for example in relation to Contract Change Proposal and Engineering Change Requests/Proposals.
• To provide technical leadership on security solution for the LORADS System and the impact on suppliers’ sub-systems and security components (e.g. other business lines).
• To define security solutions cooperatively with supplier solution teams, engineers and the cyber security design authority.
• To develop security engineering artefacts such as the statement of applicability to the targeted version of the applicable security standards, and other applicable CDRLs as directed by the lead cyber security engineer.
• To lead the vulnerability management service activities to Asian customers.
• To lead security audit and cyber health check service activities to Asian customers.
• To interface with other business lines (e.g. CDS) for the delivery of other cyber security services to Asian customers.
• Contribute to the security risk management by identifying and characterising security risk to the customer context.
• To contribute to customer meetings in relation to the cyber security tasks that you are implementing.
• To contribute to other security tasks from the AMS Business Line like for instance incident response and crisis exercises.
• To support other project or service initiatives when required.

KEY ACTIVITIES AND RESPONSIBILITIES

As the Cyber Security Engineer, you are accountable for:

• Lead, tailor, and support the Security strategy as per Engineering Plans.
• Plan, execute and manage the delivery and the Customer approval of Security deliverables;
• Plan, execute and manage the delivery of the security component with appropriate artefacts.
• Manage the technical risks relevant to Security activities to contribute to program risk management.
• Lead Security Architecture Design as per project needs.
• Lead the vulnerability management service activities to Asian customers.
• Lead security audit and cyber health check service activities to Asian customers.
• Contribute to the response of cyber incident and crisis events.
• Select, specify, and deploy methodologies (including metrics), tools/platforms necessary for Security Engineering activities in line with company policies.
• Manage and prioritize defects correction and evolutions in accordance with the project sprint strategy.
• Support Bids and Engineering Change Proposal evaluation;
• Providing collaborative support to the other members of the Project team.
• Support and contribute to the definition of the Security solution and Policies for the Products (Topsky-HE, Topsky-One, LORADS ATC).

Interactions:

• Works closely with the head Cyber Engineering Manager and the Cyber System team in country and Australia, the cyber sub-system team and solution engineering teams from the various sub-systems, including the legacy LORADS ATC and the future Topsky-One.
• Works closely with Cyber Head of Discipline, Security Authority and Solution Architects.
• Works with Subcontractors and suppliers to ensure they are aligned with the Security Program and comply with the defined security baseline.
• To establish trusted relationship with the Customers and Subcontractors (including CDS).
• Strong internal and external stakeholder management skills.

Challenges:

• Complex stakeholder community with different requirements and cultural approaches to the Delivery Process.
• High level of Customer and Senior Thales Management scrutiny and audit.
• Re-establishing a robust and rigorous discipline of weekly/monthly reporting and tracking of Project issues (cost/risk/schedule etc).
• Working in a multicultural and multisite environment.
• This position requires the capacity to understand and handle resistance to change, to engage cross functional, diverse stakeholders.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

• Experience in the life cycle of software/system development including processes and responsibilities at each stage of the cycle.
• Delivery of engineering/management services to tight timelines.
• Understanding of Security System Engineering processes and FBL/ABL/PBL management
• Working with a multi-skilled team of engineers: 2+ years
• Knowledge of Security Standards (NIST, ISO27001, Singapore security standards)
• Understanding of System accreditation and impact on project streams (sub-systems).
• Proven problem identification and analysis skills and system requirements analysis skills.
• Selecting, specifying and deploying methodologies including metrics, tools/platforms (e.g. DOORS).
• Producing appropriate artefacts leading to Customer acceptance and final accreditation.
• Contributing to Cost Models.
• Contributor to Risks & Opportunity management.
• Contribution to the management of subcontractors.
• Providing coaching/mentoring of less experienced staff.
• Challenge status-quo by being creative and innovative.
• Capability to delegate and supervise work performance.
• Excellent written and oral communications skills.
• Ability to manage Work Packages.

Responsibilities:

• Work with Systems Engineers and Test Manager to select the correct testing methods and ensure all requirements (hardware and software) are properly tested
• Assist in creation/update of test plans and verification test scenarios
• Assist in reviews, including but not limited to, Test Readiness Reviews, Technical Qualification Reviews, and Final Qualification Reviews.
• Ensure full traceability of deliverables and tests to project requirements, using appropriate requirements management tools (e.g. DOORS), and defining comprehensive scenarios for integration and test
• Set up and maintain environment (e.g. Operating Systems, network, virtual machines) for testing, including development/modification of automation scripts for setup, tests & updates.
• Install and configure required COTS (commercial off the shelves) systems for testing, including development/modification of automation scripts for setup, tests & updates, where feasible.
• Prepare the resources used for various test configurations, develop and implement verification procedures, compile results, manage test deviations and record all verification results.
• Analyze test/system/application logs and results, assist in troubleshooting and communication of variances/anomalies to relevant stakeholders
• Responsible for Factory Acceptance Test, Site Integration and Testing covering:Preparing of test cases
  Participate in the onsite activities including system installation, system configuration, pre-on-site test activities
  Participate and coordination of on-site test and commissioning activities with customer as witness
  Producing test report, raise Problem Report if required
  Responsible for Test report submission and getting acceptance from customer
  Coordination with external party for testing when required
  
• Ensure all Configuration (e.g. IP addresses, hardware serial numbers) and Change Management (CM) processes are properly followed.
• Prepare, setup, automate and conduct tests on system performance and stability, for both hardware and software
• Ensure that tasks are performed to the satisfaction of all external and internal customers

Requirements:

• Diploma in a relevant area of Engineering or related discipline
• Higher degree qualifications are desirable
• Strong passion in validation and testing
• Confident, outspoken and able to execute tasks with customers as witnesses
• Basic knowledge of running/modifying batch files/scripts
• Basic knowledge of operating system setup and configuration, such as Linux and Windows Server
• Basic knowledge on networking such as VLAN & routing configuration and basic network troubleshooting
• Strong oral and written communications skills, and ability to communicate with multiple overseas and local teams
• Able to work independently and under pressure

Desirable Experience:

• Experience dealing with IT hardware (server, network switches, storage, workstation)
• Experience with integration or testing of system, preferably till commissioning phase
• Familiarity with various system protocols, including but not limited to, TCP/IP, HTTPS, PLC integration and Modbus
• Passion for self-learning and implementing automation for tasks
• Knowledge of coding/scripting language for automation (e.g. Python, PowerShell)
• Good experience in test automation tools or implementing one from scratch (e.g. Jmeter, LoadRunner, Serial Port Tester)
• Experience in an Engineering role deploying/testing one or more large-scale solutions
• Experience in container-based technology such as Kubernetes, Docker, Containerd
• Knowledge on continuous integration/deployment (Ansible, Jenkins, Foreman)
• Knowledge on Cyber Security and know-how on hardening systems & infra
• Knowledge of Databases and their setup
• Strong experience with Linux, Windows, and virtualization (VMWare, Hyper-V)
• Strong experience in technical and engineering work on Security/Defence projects
• Membership of relevant professional organization, e.g. INCOSE, Institution of Engineers Singapore, etc.
• Cloud Technology, Virtualization or Network related certifications

Job Summary:

• Salary Range: Up $4,500 + AWS + Average 2.5 Months VB
• Working Location: Central
• Rotating shift

Job Responsibilities:

• Supervise maintenance by contractors
• Provide the necessary technical expertise and know-how in the support and management of day-to-day building maintenance and operations
• Manage outsource vendors and ensure breakdown & feedbacks are resolved in a timely & effective manner according to SLA
• Check on vendor works, sign service report and follow up on corrective maintenance
• Ensure feedback and breakdowns are registered inside building operations system so that they are tracked till completion
• Conduct periodic inspection on the system functionality, performance and abnormalities.
• Check M&E services during handing over and taking over of units
• Support tenancy fit-out and sub-division works

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Registration Number: R22108956

EA Licence No: 20C0426 (Elitez & Associates Pte Ltd)

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

· Recipe creation and optimisation for new R&D applications requirement.
- Preventive and corrective maintenance planning cum execution and vendor management.

· To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up

· Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).

· To set-up appropriate process and product control plan and out of control action plans (OCAP)

· Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirement:

· Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering

· Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)

· Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)

· Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

We are looking for an experienced and motivated Data Engineer.

As a Data Engineer at Mighty Bear Games, you will play a crucial role in shaping our data analytics platform. Your expertise will drive the development, maintenance, and optimization of data pipelines, and you’ll work closely with cross-functional teams to transform data into actionable insights that propel our games to new heights.

We are an equal opportunity employer. We celebrate diversity and welcome applications from candidates from all walks of life and are committed to creating an inclusive environment for all Bears.

Your Responsibilities Will Include

• Design, construct, install, test, and maintain highly scalable data management systems.
• Ensure systems meet business requirements and industry practices.
• Build high-performance algorithms, prototypes, predictive models, and proof of concepts.
• Research opportunities for data acquisition and new uses for existing data.
• Develop data set processes for data modeling, mining, and production.
• Recommend ways to improve data reliability, efficiency, and quality.
• Collaborate with data architects, modelers, and IT team members on project goals.
• work closely with product owners and being able design architecture that will support analytics solutions for the long term

As a Successful Candidate, You Would Have

• Proven experience as a Data Engineer, Software Developer, or similar role.
• Expertise in data modeling, ETL development, and data warehousing.
• Experience with SQL and NoSQL databases, including Postgres and Cassandra.
• Proficiency in scripting languages such as Python or Ruby.
• Knowledge of big data tools like Bigquery, Looker, Hadoop, Spark, Kafka, etc.
• Strong analytical skills with the ability to collect, organize, analyze, and disseminate significant amounts of information with attention to detail and accuracy.
• Adept at queries, report writing, and presenting findings.
• Creative problem-solving skills and excellent communication.
• Passion for gaming and understanding of the gaming landscape.
• A genuine interest in games and/or web3 and experience working in relevant creative industries.

As a Bonus, You Would

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or a related field.

If you want to be part of a team committed to transparency and openness, then Bear Force One is the place for you!

We are always on the lookout for interesting people - even if your profile doesn’t meet the requirements fully, we'd love to hear from you!

Whether you’re new to the industry or have several years of experience, here are some pointers on things we look for at Bear Force One: http://bit.ly/MBG-HowToLandYourDreamGamesJob and when you’re ready, just click to apply!

Responsibilities

• Understands the basic and essential specifications and requirements of the assigned project and Industry Standard, Classification Society and Regulatory requirements.
• Prepares the cable block diagram, interconnection diagram, loop diagram, I/O list and instrument index specific to the assigned project.
• Prepares engineering specifications (drawings, data sheets, etc) specific to the assigned project and validates them with the Senior/Lead Engineer or Project Manager before incorporating them in the RFQs.
• Evaluates with guidance from Senior/Lead Engineer, the basic items of all the bids received for I&C packages from various suppliers and performs a technical bid evaluation process against the project specifications.
• Prepares accurate documents and specifications timely to be provided to the successful vendors to enable the latter to execute their work and deliverables.
• Develops solutions to the less complex range of technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and proposing various options/measures using experience, precedents and professional references.
• Under supervision of senior/lead engineer evaluates the I&C requirement for mechanical packages in Marine & Topside, contributes to technical bid evaluation process, and ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications.
• Participates in Factory Acceptance test/Site Acceptance test to ensure that Instrument items function as per specifications. Where necessary, works with the suppliers/contractors concerned to rectify the issues & making sure that they comply with the specifications and are ready on time.
• Participates in meetings, reviews progress and helps address interface/implementation/execution issues, escalates where necessary to ensure that the project proceeds timely and smoothly. Follows up to implement continuous improvement or lesson learnt actions items.
• Provides technical/engineering support to Construction/Commissioning work at site, helps trouble shoot and follows up to rectify the gaps or problems. Where necessary, provides off-site support and advice.
• Guides junior Engineers.

Qualifications & Experience

• Bachelor in I&C Engineering
• 7 years of relevant working experience in I&C engineering in oil and gas sector.
• Comprehensive knowledge on functionality of FPSO

Work Responsibilities:

• Work as part of an engineering team.
• Perform engineering duties such as design, engineering calculations, planning and tender preparation/evaluations.
• Design of electrical systems such as low/high voltage power distribution system, lightning protection system, lighting, emergency voice communication system, data cabling etc
• Preparation of M&E cost estimate base on approved design, technical specifications and tender documentation.
• Verification of Work Progress and Variation Order for progress claim.
• Liaise and attend meetings with clients, project managers, architects, contractors and authorities as required to ensure technical compliance and timely completion of projects.
• Resolve any technical and engineering problems faced during project design and/or construction stages.
• Compliance with all necessary standards, code of practice and safety regulations.
• Other ad-hoc duties that are required.

Requirements:

• Minimal Degree in Electrical Engineering or its equivalent.
• Fresh graduates are welcome to apply.
• Knowledge of project technical knowledge, M&E specifications & requirements, Singapore Codes of Practice & Standards and authority submission process would be an added advantage.
• Excellent interpersonal, good written and verbal communication skills.
• Team player and able to work independent with minimum supervision.
• Able to work under pressure with good time management skill.

Interested applicants, please apply with full resume, contact number(s), expected salaries, copies of educational certificates, date of availability, recent photo and reasons for leaving last job, to [email protected] .

We regret that only short-listed candidates will be notified.

1. Candidate must be a Diplomo/Degree in Electrical (or)

2. Diplomo in Mechanical/Degree (or)

3. Dipolomo in Civil/ Degree (or)

4. Diplomo in Computer Application/Degree

5. He must have more then five years of working experience in their respective field.

6. He must have good interpersonal skills, Hard working and positive attitude

7. Attend to other ad hoc duties instructed by supervisor.

8. Perform daily routine work of company.

9. 6 days work week.

10. Must have class3/3c driving license

11. Must be able to handle the construction project Independently

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Degree in Civil Engineering/ M&E Engineering

- Mininum 2 - 5 years' experience working in construction industry

Job Description:

• At least 2 years of experience operating in an Enterprise environment and processes (L2 or L3)
• Plan, deploy, manage and monitor systems and infrastructure of Windows server, Wintel, and Linux environment (90% Windows, 10% Linux);
• Daily operational tasks of system administration (health checks, pre and post-patch checks, troubleshooting, diagnostic)
• Deploy and configure server/VM builds to support the deployment of applications;
• Experienced using vSphere, ESXi and vCenter to manage, deploy, configure and patch will be advantageous for the candidate
• Experience in IT operations, incident management and change management is preferred
• Take proactive actions to ensure that systems and infrastructure meet high levels of availability;
• Plan, manage, execute and close change requests and deployments
• Plan and perform patching following best practices (Build, test, snapshot, pilot, release, monitor, rollback)
• Perform an assessment of server environments and recommend changes to improve system performance and overall stability.
• Perform migrations / installations / upgrades of Windows operating systems and installed applications
• Maintain and operate complex Windows AD and domain controllers.
• Liaise with various vendors or personnel for troubleshooting and resolution;
• Be on standby for urgent matters, and perform hands-on troubleshooting as required.

Requirements :

• Proven experience in working with enterprise systems and environments
• Experience in patch management with dependencies planning
• Proven working experience in deploying, managing and troubleshooting Windows, File servers, domain controllers systems, and Linux
• Experience with virtualization and containerization (vSphere is preferred)
• Familiar with the process of monitoring systems and generating utilization and alerts reports
• Familiar with the process of IT change management

This position is responsible for delivering billable network services by delivering superior technical solutions to all target customers, particularly in Security and network (LAN) solutions.

Responsibilities:

Ensure best practice is leveraged in providing the solutions to target accounts

Provide support to customers, particularly in Security products such as Firewalls, IPS, IDS (e.g. Palo Alto, Checkpoint, McAfee, Bluecoat, F5) products, transferring customers’ requirements into a solution based on Fujitsu solutions and services. Owns technical design from concept to subsequent implementation; responsible for design, configuration, testing and commissioning of solutions

Manage first level escalation of any deployment issues and problems. Note and escalate service development required to meet customer needs

Identify and create business opportunities for Fujitsu target customers and prospects

Participate in the tendering process and development of proposals in line with customer needs, liaising and qualifying with other colleagues as necessary. Supports in the development of customer SLAs.

Present technical solutions and services to customers both formally and informally as required with minimum support.

Stay abreast of technical issues, options and advancements within the internetworking industry relevant to the Fujitsu services’ portfolio

Provide a consistently high quality (billable or non-billable) technical service to existing and new customers ensuring that customer satisfaction is maintained or improved

Job Requirements:

A relevant degree with at least 3-5 years of experience as technical sales support in network environment and relevant experience in project implementation

CCNP certified a must, CCIE will be an added advantage

Good knowledge in network systems, communications interfaces protocols and diagnostic tools

Good experience on deploying security solutions such as Cisco ASA, FTD, Palo Alto, Checkpoint, Juniper, McAfee IDS/IPS, F5 and Other network security systems

Good knowledge of products related to Routing, Switching and Firewall

Experience with VMWare NSX V or T is a plus.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Civil and Environmental Engineering at the National University of Singapore is hiring a Research Fellow (RF). The successful candidate will work on structural health monitoring (SHM) and defect prediction of a floating tidal-wave energy system under the direct supervision of Professor KOH Chan Ghee.

Job Requirements

• Possess a recognised PhD degree in Structural Health Monitoring or a related discipline in civil/mechanical/offshore engineering.
• Experience in development and application of sensors and damage identification algorithms (e.g. machine learning methods)
• R&D experience in offshore/marine systems is preferred.
• Has prior good publication record.
• Strong writing and communication skills and able to conduct presentation and present results.
• Ability to work individually & independently and/or in a team.
• Open to fixed-term contract.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to ensure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

- Looking for a reliable, agile, and professional individual.

- Able to understand, look ahead, plans the production schedules etc, and provide day to day supports in materials / spare parts procurement, inventory and logistics management to ensure smooth Fab operations.

- Initiate, lead and provide day to day supports in all logistics needs and initiate material/spare parts procurements when required to ensure smooth Fab operations.

- Follow through all the orders initiated from the start of purchase till delivery. Ensure the orders are delivered are on time.

- Accountable for the inventories required to enable smooth FAB cleanroom operations.

- Work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.

- Employ critical thinking and put-up good initiatives to move forward towards systematic inventory digitalization.

- Ability to work in a multi-task environment.

Experience:

- Education: Diploma/Degree in engineering or supply chain discipline.

- Process strong customer service mind-set with excellent interpersonal and communication skills.

- Preferably some knowledge of supply chain analytics, experiences in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.

- Fresh graduate can be considered as well.

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to ensure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

- Looking for a reliable, agile, and professional individual.

- Able to understand, look ahead, plans the production schedules etc, and provide day to day supports in materials / spare parts procurement, inventory and logistics management to ensure smooth Fab operations.

- Initiate, lead and provide day to day supports in all logistics needs and initiate material/spare parts procurements when required to ensure smooth Fab operations.

- Follow through all the orders initiated from the start of purchase till delivery. Ensure the orders are delivered are on time.

- Accountable for the inventories required to enable smooth FAB cleanroom operations.

- Work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.

- Employ critical thinking and put-up good initiatives to move forward towards systematic inventory digitalization.

- Ability to work in a multi-task environment.

Experience:

- Education: Diploma/Degree in engineering or supply chain discipline.

- Process strong customer service mind-set with excellent interpersonal and communication skills.

- Preferably some knowledge of supply chain analytics, experiences in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.

- Fresh graduate can be considered as well.

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• To keep abreast of the current state-of-the-art motion control algorithms
• To develop a variety of trajectory tracking algorithms (path and speed profile)
• To account for vehicle dynamics subject to variable loading of towed trailers
• Software design and development

Required experience

• Ideally 1+ years of experience in control research domain.
• Bachelors in computer science, Robotics, or related fields
• Strong familiarity with control systems, robotics, autonomous vehicles
• Strong familiarity with trajectory optimization
• Experience with research in robotics or related fields involving realistic agent motion
• Experience with C++ in a Linux environment
• Flexible problem-solver

Bonus experience

• Experience with ROS or other similar middleware
• Experience with data structures, object-oriented programming
• Experience with real world robotics deployment
• Experience in data-analysis
• Experience in simulation

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!