Job Summary: We are seeking a skilled Engineer to join our team, specializing in Quality Control and Assembly within the VCB (Vacuum Circuit Breaker) and SWG (Switchgear) division. The ideal candidate will be responsible for ensuring the quality of incoming goods, conducting tests on VCB units and 20GC GIS (Gas-Insulated Switchgear) Panels, performing assembly tasks, and maintaining calibration control for tools and machines in compliance with ISO standards.

Key Responsibilities:

• Perform incoming Quality Control (QC) procedures for VCB department and SWG division, including thorough inspection and documentation of incoming goods.
• Implement reject control processes for non-conforming products, ensuring adherence to established standards and procedures.
• Conduct testing and evaluation of VCB units and 20GC GIS Panels to ensure compliance with technical specifications and quality standards.
• Perform outgoing QC procedures for VCB units and 20GC GIS Panels, ensuring that all products meet customer requirements and regulatory standards.
• Maintain calibration control for tools and machinery used in production processes, ensuring accuracy and reliability in accordance with ISO standards.
• Undertake assembly work for VCB units and 20GC GIS Panels, following assembly instructions and blueprints with precision and attention to detail.
• Collaborate with cross-functional teams to address quality issues, implement corrective actions, and continuously improve quality processes.
• Provide technical support and expertise to colleagues and other departments as needed.

Qualifications and Skills:

• Certificate in Nitech/ Higher Nitec, Diploma or Degree holder in Electrical Engineering or related field.
• Previous experience in Quality Control and Assembly, preferably in the electrical engineering or manufacturing industry.
• Strong understanding of QC processes, testing methodologies, and ISO standards.
• Proficiency in using testing equipment and tools for QC and calibration purposes.
• Ability to interpret technical drawings, schematics, and assembly instructions.
• Problem-solving skills with the ability to analyze issues and implement solutions in a timely manner.
• Ability to work independently with minimal supervision, as well as part of a team in a fast-paced environment.
• Experience with electrical testing and inspection procedures.

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

Responsibilities

• Ensure that the model aligns with the standards and goals set in BIM BEP/LAE BIM GUID and BIM project criteria
  
• Collaborate and coodinate internally or/and externally with other desciplines design changes and model changes
  
• Develop accurate construction drawings and extact data based on the descipline BIM platform
  
• Coordinate design documentation as a methodology with full utilisation of BIM software and tools
  
• Able use navisworks to present VDC
  
• Attend coordination meeting with Project Consultants and coordinate with Project member of other disciplines

• Responsible for maintaining and updating of BIM Model until as build
  
• Carry out proper procedures and preparation for drafting for the different stages of issure & authority submission of the project assigned.
  
• Production of shop-drawings and as built drawing, including BIM Models if required.
  
• Document control of submissions (Technical Data, sho-drawings, as built)
  
• Maintain records for changes and updates on drawings.
  
• Develop shop drawing according to the schedule.
  Produce/Draw/Amend/Update drawings using BIM according to specs, co-ordinate with project department
  
• Other duties assigned by the superior
  
• Ad-hoc duties assigned by the Management from time to time
  

Requirement

Minimum Diploma in M&E / Engineering from recognized institutions

• 3 years of experience in MEP drafting using 3D BIM (Autodesk Revit) and Autodesk Navisworks for commercial projects

• Well versed with strong techniques in Autocad, 3D BIM Revit in MEP and other 3D software

• Proficient in MS Suites

• Good verbal communication skills and interpersonal skills

• Strong analytical skills and ability to be an independent problem solver

• Team player with ability to multi-task in a fast-paced environment

• Highly motivated and enthusiastic

• Preferred Plumbing and Sanitary experience

You will need:

● 4 years of React experience

● 4 years of experience with JS, preferably also TypeScript

● Good proficiency in CSS, HTML, and related web technologies

● Extensive experience writing unit and end-to-end tests

You might be an excellent fit if you have:

● Experience developing highly performant websites for serving content at scale

● Extensive SSR or SSG experience, possibly with React

● Experience with AWS services, including Lambda

● Experience maintaining CI/CD pipelines

● Some experience using Docker or Terraform

The incumbent will be required to design, control, implement and optimize automation systems and solutions:

• Responsible to support Projects and Operations (90%):
• Participate in development, execution, and deployment of IoT automation Projects or Products.
• Evaluating products to collect data from sensors and integrate that data to the control system and/or platform.
• Perform test and evaluation activities on Process Control System independently or in conjunction with vendors.
• Participate or lead quality or safety investigations and implement any automation solutions resultant from these investigations.
• Provide training to end users on process control system.
• The role includes research and development (R&D) tasks.
• Support the R&D team in Singapore (10%):
• Improve, propose new and support existing and future hardware and automation solutions.

• Develop display components (display panels, touch sensors, cover glass, etc.) in Automotive products (digital clusters, display solutions, and head-up displays).
• Development includes technical requirements definition, concept creation, architecture design, deviation review and negotiation with supplier, design review, performance evaluation/optimization, specification creation, failure analysis and support part qualification till mass production.
• Define, align and track display components’ development milestones & schedule, and budget to ensure deliveries to customers.
• Manage and lead in display component-related technical discussion with suppliers and internal project team members.
• Prepare engineering documentation, specifications and reports.
• Follow both project implementation and quality management rules in realization of the display components.
• Develop new display / touch panel technologies in preparation for application in future Automotive products.
• Work closely with supplier quality management and category management in new supplier development and introduction.

As IT engineers, you are pivotal IT professionals entrusted with the design, installation, and maintenance of the company's computer systems. Your responsibilities encompass comprehensive testing, configuration, and troubleshooting of hardware, software, and networking systems, ensuring seamless deployment to fulfill the client's requirements. Operating within a fast-paced and demanding environment, your expertise plays a critical role in upholding operational efficiency and meeting organizational objectives. Key responsibilities include:

• Deliver day-to-day technical support to end-users, ensuring the smooth operation of computers and network devices.
• Take charge of hardware and software installation, upgrades, and maintenance tasks, including system backups, applying the latest patches, and troubleshooting hardware issues.
• Provide comprehensive system administration and helpdesk/desktop support to end-users.
• Implement robust security controls to safeguard the organization's data and infrastructure.
• Troubleshoot network and software issues, ensuring minimal downtime.
• Swiftly address and resolve hardware, software, and networking issues to maintain operational continuity.
• Responsively handle general IT requests from stakeholders.
• Engage with clients to understand their requirements and ensure their needs are met effectively.
• Conduct regular inspections to verify the operational status of IT systems and equipment, proactively addressing any issues.

• Prior experience in IT support or administration.

• Strong knowledge of networking, hardware, and software systems.
• Proficiency in troubleshooting and problem-solving.
• Excellent communication and interpersonal skills.
• Ability to work independently and in a team environment.
• Fresh grads are welcome to apply

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Conduct reviews and/or updates on Materials Suitability Reviews and Equipment Strategies to ensure equipment reliability.
• Review ITP, WPS, PQR, WQT, IMIR, Quality manuals and preparation of job packs, QA/QC documents relevant to plant etc.,
• Plan and keep track on SI Equipment/SRV and critical valves schedule inspection and follow the regulatory requirements.
• Plan and carry out Static equipment and piping inspection, on stream inspection, risk-based monitoring programs, base line inspection program and Total flange management QC master.
• Monitor and report on inspection program findings and recommend appropriate solutions for corrosion issues as short term and long term, to ensure safe and reliable operation of equipment.
• Investigate equipment failure and recommend cost-effective methods of repair and material selections. Capable of analysing metallurgical failures in materials.
• Develop and update piping and equipment history records for reliability study. and Maintain effective Inspection Data Management system and filing system, including periodic updates.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards, and specifications.
• To contribute and assist to clear the project punch list and related QA/QC documents.
• Stewardship in preparing Inspection procedures/documents and Total Flange Management work process.

Qualifications:

• Degree in Mechanical Engineering, Materials Engineering or Diploma in Mechanical Engineering from a recognized university, preferably with at least 5-10 engineering /Maintenance/Project field experience in the chemical, rubber, oil and gas, or petrochemical plants.
• Strong written and verbal communication in English
• Familiarity with major API codes 510, 570, 576, 579, 580/581, 650 and 653. • ASME Sections VIII and IX, ASME B31.3 Especially for pressure vessel, piping and tankage will be an added advantage.
• Knowledge and ability to use computer programs such as MS Office, SAP etc.
• Knowledge and Qualified Non-Destructive Testing: UT, RT, MT, PT.
• Knowledge of materials selection, Non-Destructive Examination techniques, welding, and risk-based inspection procedures, would be an advantage.
• Independent, adaptable and takes well to challenges.
• Team player with strong drive to deliver against commitments.
• Work Experience in Projects.
• Good knowledge in analysing the HSSE requirements.

Job Description

• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation.
• Prepare the scope of works for electrical services, specifications of spare parts for the maintenance work.
• Maintain and updated all the drawings, data and maintenance record for all electrical equipment and plant utilities in Power Plant.
• Ensure the proper preventive, corrective and condition-based maintenance (including emergency situation) carried out for all electrical equipment and plant utilities in the Power Plant.
• Perform technical evaluation on external service engagement and material purchase.
• Assist in preparation of the annually maintenance budgetary cost on electrical equipment and plant utilities.
• Provide necessary guidance and advice to maintenance staff to ensure the quality maintenance is carried out as per good engineering practice.
• Ensures that subordinates are adequately trained and recommends necessary training.
• Ensure PPE are provided, and subordinates are utilizing it by executing works with all safety precautions.
• Ensure all Power Plant jobs executed are in line with statutory requirements of concerned authorities and power plant policies and procedures.

Job Requirements

• Possess a Bachelor Degree in Electrical Engineering
• At least 3 years of relevant working experience in Power Plant Maintenance ideally on a CCPP
• Involvement in technical aspects of Power Plant maintenance
• Experience in the erection, testing and commissioning, and initial start-up phases of a modern Power Plant
• Knowledge on electrical system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on electromagnetic rotating equipment
• Knowledge on protection relays
• Knowledge on electrical equipment, i.e. GIS, MV/LV switchgear, transformer, generator, Automatic Voltage Regulator, Uninterruptable Power Supply, VFD, DC System-Battery and charger, HVAC, Communication System, etc
• Knowledge on control circuitry of power plant electrical system
• Knowledge in maintaining maintenance record in CMMS

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Perform as the Company nominated QC representative daily quality inspections on the various disciplines for the Company’s sub-contracted site activities: boiler welding, mechanical erection of process equipment, piping, painting, structural steel erection.
• Perform receipt inspections of goods and equipment at delivery to check completeness and to report about eventual transport damages. Monitor the storage and preservation conditions on site.
• Monitor the implementation of the approved site Inspection and Test Plans
• Verify that the quality related site activities are in accordance with the applicable codes and standards.
• Monitor and perform spot-wise inspections on all non-destructive testing on site.
• Monitor subcontractor’s work tools calibration.
• Monitor level of training and qualification of all subcontractor personnel.
• Register, follow-up and monitor handling of non-conformities.
• Monitor and review that all sub-contractor QC documentation is available, compliant and complete according to the specification and ITP and in accordance to the actual progress on site.
• Coordinate exchange of relevant QA/QC documentation to and from site subcontractors and third parties (including Notified Body).
• Ensure that all sub-contractor QC documentation is hand-over as-built and complete at pre-defined inspection milestones.
• Liaise with the Company’s relevant discipline project engineers and vendor QC inspectors about quality related matters.
• Assist to site meetings with customer, sub-contractors or vendors about quality-related matters.
• Organise and chair weekly QC site meetings with main subcontractor QC personnel. Draft meeting reports and distribute to all participants, the QC Manager, the Site Construction Manager and other stakeholders.
• Invite and accompany the customer representative and third parties (including notified body) for witness and hold point activities according ITP.
• Coordinate with and report to the Company’s Site Construction Manager on all quality and safety-related issues.

Job Requirements

• Degree/Diploma in Engineering (Mechanical, Chemical preference) or equivalent.
• A minimum of 5 years experience in QC inspection on welding, NDT and mechanical erection activities.
• A sound working knowledge of EN standards and PED for (boiler) welding, piping, coating, NDT and pressure testing. Demonstrated working experience with steam boiler erection and pressure equipment.
• Good understanding of mechanical erection activities, their possible problems and to act pro-actively to prevent them from happening.
• The ability to work in a team as part of the Company and to communicate with colleagues (on and off-site), enforce resolution by the sub-contractor and to follow-up related communication.
• Any certification related to QC activities (welding, NDT, painting/coating inspection, audit etc) is a plus.
• Willing to work in Tuas, shift and weekend.
• Preferable with local driving license.

Job Responsibilities:

§ To conduct and carry out TBM and allocate the task to supervisors and team.

§ Prepare and submit Daily, Weekly and Monthly construction report.

§ To monitor the site progress and highlight obstructions to carry out works.

§ Ensure site team perform all the activities in safe and effective manner.

§ Assist in technical studies and prepare cost estimates.

§ Assist in project schedule by studying project plan and specifications, calculating time requirements, and sequencing project elements.

§ Maintain project schedule by monitoring project progress, coordinating activities, and resolving problems.

§ Assist in project planning and scheduling.

§ Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.

§ Maintains safe and clean working environment by enforcing procedures, rules, and regulations.

§ Maintains project data base, entering and backing up data.

§ Prepare the site progress photos for progress claim submission and variation works claim.

§ Execute the construction team requirements and translating them into an actionable plan by team of workers.

§ Attend daily site coordination / logistic meeting.

§ Prepare handing over document and close-out NCR’s.

Job Requirements:

1. Minimum Qualification : Diploma or Degree in Civil Engineering / Construction Management

2. Minimum Experience : 3 years related experience

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

1. Project coordination and supervision, ensuring efficient task delegation and team management.

2. Oversight of all site operations, with a focus on safety, quality assurance, and regulatory compliance.

3. Rigorous monitoring of project schedules and progress to meet deadlines and deliverables.

4. Attend site meeting and liase with consultants, architects, clients pertaining to site matters.

5. Overall project management and implementation.

System Operator / Associate Engineer (Operation)

Responsibilities:

• Conduct on-site daily maintenance check for simulator.
• Carry heavy equipment for training set up.
• Operate and support simulator training independently.
• Perform basic IT troubleshooting.
• Any other duties as assigned.

Requirements:

• NTEC / Diploma in Mechatronics / Electrical / Electronics / Computer Engineering.
• IT savvy.
• Willing to perform overtime during weekday and weekend (Occasionally).
• Able to work in the west of Singapore.
• Good working attitude with ability to work independently as well as in a team.
• Only Singaporeans need apply.

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Preparation of structural design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.  
• Senior technical resource may serve as technical advisor for team 
• Provides specialized technical input to studies and design for staff's specific area of expertise. 
• Develops study and design procedures to facilitate high quality cost effective work by others. 
• Participates in interdisciplinary review of project deliverables. 
• Develops construction cost estimates and estimates of technical efforts for projects. 
• Uses expertise in all steps of completing discipline component of PS&E package. 
• Performs quality control review of design calculations or drawings. 
• Prepares technical specification sections. 
• Provides input to the development of engineering budget and schedule to meet requirements. 

- Designed and built electrical power distribution systems for efficient and reliable operation.

- Developed standard operation procedures for electrical work to be performed while all critical loads and essential panels were energized.

- Upgraded and configured existing electrical systems to eliminate risks of overloading power sources.

- Supported the maintenance and operation of plant electrical systems and troubleshooting of electrical and control system problems.

- Surveyed and evaluated potential solar sites to examine shading, obstructions, and electrical service.

- Designed sizing and specification of solar panel, controller, batteries, inverter, and solar cable.

- Designed and developed solar power system for residential and industrial application, such as LED lighting, AC-DC and DC-AC appliances. battery backup power "microgrid" solutions for retail customer

- Designed single-lines, layouts, equipment specifications, cabling, conduit, and panel schedule. (Using Auto CAD 2D)

- Conducted low voltage testing of electrical system and assessed continuity of circuits in electrical wiring, equipment’s, and fixtures, using testing devices such as voltmeter, ammeter, ohmmeter, and multimeter.

- Provided support to installation teams and assisted in the technical procedures during installation while monitoring performance.

- Able to supervise and manage sub- contractor to carry out their work accurately and timely in accordance the contract drawing and specification.

- Assured that project designs and installations met all the relevant safety regulations, as well as the clients' requirements.

- Assisted Project Development Managers with technical aspects of customer requirements.

- Collaborating with Management and other engineers in our team

- Other task assigned by the Management

Roles & Responsibilities

• Microservices dev with Java and spring boot; Kafka; MongoDB and MariaDB
• Manage Operations on PCF, OCP, VPC, Jenkins, AWS
• Data engineering with Spark and Python
• Release management

Requirements

• 7 to 10 years experience in Microservices dev with Java and spring boot; Kafka; MongoDB and MariaDB
• Experience on PCF, OCP, VPC, Jenkins, AWS
• Data engineering with Spark and Python experience
• Release management experience
• Excellent tech and business stakeholder management

Roles & Responsibilities

• Microservices development using Java/Spring/MariaDB.
• Coordinating with other teams as single point of contact
• Managing production releases with good preparation and low error rate.

Requirements

• 7 to 10 years experiences
• Java/Spring REST APIs
• MariaDB & SQL
• Good communication skills

Roles & Responsibilities

• Microservices development using Java/Spring/MariaDB.
• Coordinating with other teams as single point of contact
• Managing production releases with good preparation and low error rate.

Requirements

• 7 to 10 years experiences
• Java/Spring REST APIs
• MariaDB & SQL
• Good communication skills

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational downtime.

As an IT Support Engineer, you will be responsible for the following:-

• Support the project teams in the implementation, installation and configuration of PCs/Workstations O.S., applications and related peripheral devices.
• Provide 1st level on-site IT support to the end-users on a 24x7 rotational shift, from 10 am to 10 pm/ 10 pm to 10 am, including Public Holidays.
• The successful applicants should be prepared to be deployed primarily at Tuas Checkpoint. The successful applicant could be deployed to the Tuas checkpoint in the future on a rotational basis.
• Provide findings and timely status updates to the Project Manager on major issues escalated by users.
• Perform daily health checks and inventory checks on the system.
• Experience in installation, configuration, troubleshooting of PC / peripheral devices and application maintenance support will be required.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have a keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, and troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), and KPIs (key performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days.