Duties & Responsibilities:

• Provide technical support to the production machines and ensure tasks performed are completed within full cGMP compliance
• Operate the production machines and ensure production meets daily output
• Perform mould set-up and mould insert cleaning as and when required
• Use optical and mechanical devices for measurement and inspection of moulded parts
• Perform in-process quality inspection during production to ensure the quality of products meet specifications
• Perform troubleshooting, servicing, calibration and preventive maintenance on production machines, jigs or fixtures
• Support new machines setup
• Perform tasks in accordance to safety procedures to ensure plant safety
• Perform data collection and recording of machine and process data on specified data log book or record sheet
• Ensure all processes and activities carried out are consistent and comply with approved procedures and meet quality standards

Experience

• Minimum NITEC in Electrical, Mechanical or Mechatronics Engineering
• Minimum 1 year of related experience in a fully automated manufacturing environment
• Must have hands-on experience in both electrical and mechanical components.
• Good understanding of electrical and/or mechanical diagrams
• Possess knowledge in polymer engineering / science / manufacture and experience with moulding high precision parts will be an added advantage
• Able to perform 12 hours shift work and is willing to work overtime on both weekdays and weekends when required
• Willing to work in clean room environment
• Responsible and independent worker who requires minimal supervision
• Must be a team player

• Assemble and install mechanical systems for industrial, electromedical, and manufacturing purposes Implement cost-effective changes in equipment design to improve reliability and safety
• Assist mechanical engineers in developing, building and maintaining machines and tools
• Read and interpret engineering designs, plans, and diagrams for piping, transmission, and HVAC systems Prepare cost and material estimates for a project
• Test and analyze machines, tools, and components to determine their performance, strength and response to stress
• Design manufacturing implements such as jigs, dies, and moulds
• Carry out inspections to identify faults and initiate repair of mechanical systems or products
• Monitor mechanical processes to ensure conformance to standard project procedures Use
• CAD software and technology to prepare drawing plans and design for an engineering project
• Assemble components or machine parts to form integral or complete product unit
• Provide technical solutions to mechanical problems found in a variety of industries
• Develop and design prototypes of equipment
• Ensure compliance with health/safety procedures and regulations
• Implement quality control systems useful in evaluating and testing mechanical processes/product for consistency.
• Liase with various departments to completed the job.
• Report to Management Level

Requirements

• Degree in Engineering Mechanical
• Working Location : Jurong West
• Working days : Monday - Friday (5 Days)
• Shift Work required ( Rotation work at Saturday & Sunday)
• Require to work at Night Shift

T & C Manufacturing is looking for candidates with the following pre-requisites:

• Min. GCE "O" Level (chemistry and biology).
• Some Knowledge and experience in laboratory work.

Job Descriptions as follows:

1. To perform sensory evaluation, chemical and microbiological analysis on products and raw materials.
2. Understand sampling plan and methods of sampling and carry out raw materials and products sampling according to sampling plan if necessary.
3. Preparation of laboratory culture media and reagents when necessary
4. Prepare product sample upon request by customers or for internal and external lab testing
5. To record all information required into the provided inspection form and master list.
6. Maintain good housekeeping of the lab and equipments.
7. To inform QC HOD on lab inventory status to purchase necessary items and equipments for analysis.
8. Report to HOD if any non-conformances found on raw materials and products.
9. Keeping retained raw material product sample according to production date for future reference in case any quality dispute from customers.
10. To participate in company level activity task and duty from time to time.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

• Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission
• Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.
• Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.
• Complete work order for each vehicle and unit serviced.
• Adhere to defined guidelines in regards to safety, orderliness and etc.
• To ensure overall customer satisfaction with Company’s Aftersales service
• Diligent recording of all info in service report (mileage, parts list, fault codes, etc)
• Carry out recall /warranty job as documented by MAN
• Ensure 5S compliance
• Other functions as required by superior

Requirements:

• Academic qualification: At least Higher Nitec in Automotive Technology or equivalent
• Competent in basic English (verbal & written)
• At least 3 Years and above of experience in performing automotive service repair.
• Posses of Class 3 driving licence will be an added advantage
• 6 Days work (Monday-Saturday)
• Working Hour (7:30am -5:15pm)

Job Description

• Preparing the list of works, materials, tools, machineries, and other things to be used.
• Planning of works for the task given.
• Conduct inspection before and after the work.
• Able to communicate with the User
• Communicate closely to Supervisors by updating the works such as before, progress, after or completion of works on site.
• To attend and assisting in firefighting, major breakdown such as pipe burst, ceiling collapse, leaking, choke, etc., when there is an outbreak.
• Routine servicing, repairs and replacement of spares, consumable materials, items and components to all systems and equipment to ensure that they are operational.
• Knowledge in repairing of door accessories and hardware, painting works, carpentry.
• Hands-on support to Building operations
• Responsible for any ad hoc duties tasked by direct Supervisor or Management
• Carry out preventive and corrective maintenance of the designated Building premises.
• Documentation of scheduled routine findings and rectification.
• Attend to all work orders issued by the operations and management
• Knowledgeable in repairing of plumbing & sanitary fitting & fixtures.
• Daily routine inspection on building premise, Building fixtures and fittings etc.
• To handle & manage external Specialist contractors awarded jobs on-site.

Job Requirements

• Educational qualifications with either of the following:
• Higher NITEC (or equivalent) in relevant FM discipline, with minimum 3 years relevant experience; or
• NITEC (or equivalent) in relevant FM discipline, with minimum 5 years relevant experience; or
• Minimum SEC (Skill Evaluation Certification) of relevant FM discipline accredited by BCA, with minimum 5 years relevant experience; or
• Minimum 10 years of experience.
• Comfortable to work in hospital setting
• Able to commit to 5.5 work week with staggered rest days implemented due to operational requirements
• Able to work Overtime as and when operational requirements or work urgency entails.

Job Responsibility

• This role supports the controls department specializing in Penumatic Automation solutions in Healthcare/Medical Industry
• Finding sales opportunities in and around the territory
• Follow up on leads and sales inquiries
• Building excellent relationships with potential clients
• Write client proposals and negotiate to a successful conclusion
• Collaborating with the Operations team to arrange the take on of new projects
• Recording daily sales activities and client information
• Run salesforce campaigns for prospects and clients
• Plan meetings with potential clients to sell the company's products and solutions

Job Requirement

• Candidate must possess at least a Diploma specialize in Sales/Marketing/Engineering or equivalent.
• At least 1-2 year(s) of working experience in selling Penumatic/Control/Engineering/Robotic/System & Automation.

Job Responsibilities:

• Perform all production activities at various stages and to work as a team with other production personnel to achieve production targets in accordance with ISO Quality Management System and applicable safety standards.
• Production Processes
• Weighing, mixing, filter preparation, filling and packaging.
• Completion of all associated production records in accordance with good documentation pratices
• Transfer of raw and packaging materials as well as finished products
• General Duties
• Perform house-keeping and first-level trouble-shooting of equipment as needed.
• Equipment and area cleaning on regular intervals.
• Comply with all safety and environmental regulations.
• Work on continuous improvement initiatives within Production.
• Handle non-routine duties as assigned by senior technicians or Production supervisor.

Job Requirements:

• Min GCE 'O' Level / Nitec in production, preferably in industrial engineering.
• Min 3 years of related working experience, preferably in chemical process related industry / production factory
• Computer literate (MS Office) and knowledge of Chemistry preferred
• Experience in material handling with forklift or maintenance will be an advantage
• Forklift License preferred
• Positive mindset with a sense of urgency
• Dedicated and able to work independently as well as a team player
• Customer focus with emphasis in quality
• Good written and verbal communication and interpersonal skills
• Work hours: 5 days, day shift
• Occasional overtime required
• Work Location: Jalan Tukang

Responsibilities:

You will be part of a team to provide facilities management services to our client's sites, managing camps that focus on Outdoor Adventures Activities. You will be required to carry out regular inspections to the sites and its facilities to maintain a high service delivery level. You will supervise and manage contractors on the scheduled maintenance of various functions and systems within the sites.

Requirements:

• You shall possess NITEC certification with a minimum of 5 years of relevant experience
• Possess good hands-on knowledge on maintenance works
• Having a Class 3 driving licenses will be an additional advantage
• Willing to work offshore, embarking from Punggol Point Jetty and approximately 7 minutes ferry to the premises
• Working hours : Mon – Fri (8.30am to 5.30pm), Alt Sat (8.30am to 12.30pm)
• Comfortable to work night shift (6pm to 6am) and morning shift (7am to 4pm) when required

JOB DESCRIPTION OF WORKSHOP TECHNICIAN

Primary Roles

1. To perform any disassembly, assembly and testing work for equipment and tools

2. To be able to collect information (photos of equipment during disassembly, assembly & testing) for preparation of inspection reports and final assembly reports, etc

3. To be able to take measurement using process instrument for parts, component and record in assembly process documents

4. Preparation of part list once the inspection is completed for submission to Workshop Foreman

5. To ensure all products are assembled using the correct parts/components per ‘Bill of Material’

6. To check parts received from warehouse and provide feedback to Workshop Foreman if discrepancy found

7. To be able to perform any rigging, lifting and forklift operation

8. To work with Competency Assessor and complete competency assignment

9. To ensure equipment/tools/work area are maintained in a clean and orderly condition

10. To fill up equipment component traceability record, all applicable D9 documents and QP for the job assigned and submit to Workshop Foreman for review

Secondary Roles

1. To provide update in Job tracker

2. To prepare inspection or final assembly report when assigned by Supervisor

REQUIREMENTS

1. NTC/NITEC/Diploma in Mechanical Engineering or the equivalent

2. Minimum of 3-5 years of hands-on experience in heavy machinery environment especially in hydraulics and pneumatics

3. Able to read technical drawings in order to assemble machine parts

4. Preferably a valid class 3 driving license to facilitate inter-shipyard work

5. Familiar with Microsoft Office applications

6. Good written and communication skills

Job Highlights:

Stable and friendly working environment.

Various Bonus.

Provide opportunities for career advancement within Co.

Work and life balance.

Job Description & Requirements:

Due to an increase in our service activities in our service department, we are looking for a qualified Engineers / Technicians in the feild of automation or Instrumentation for marine vessels.

1. Experience in shipyard and marine vessels.

2. Experience in servicing of vessel automation systems.

E.g. Valve positioners, Actuators, Tank gauging, gauges, transmitters ...

3. Ability to work both independently and as part of team.

4. Able to travel to regional countries.
5. Good communication skills.

6. Class 3 driving licence (prefer).

Responsibilities:

• Operate the Combined Cycle Power Plant safely, efficiently, and in accordance with established operational guidelines to meet output requirements.
• Prepare for, execute, and monitor the startup, shutdown, and routine operations of generation units and auxiliary systems.
• Carry out condition monitoring, review operating parameters, and correct deviations to maintain optimal plant performance.
• Identify, report, and rectify all system, plant, and equipment defects.
• Ensure adherence to the plant’s generation dispatch schedule, conducting operational tests and inspections as required.
• Respond to plant emergencies, equipment failures, and outages.
• Manage generating unit operations and maintenance activities, ensuring compliance with safety measures and specifications.
• Monitor work areas and inspect tools and equipment to detect and prevent unsafe conditions or violations of procedures and safety rules.
• Prepare daily shift log reports and other operational reports.
• Liaise with external agencies (e.g., EMA PSO, PUB, NEA, SCDF) on operational matters during shift duty.

Requirements:

• Nitec in Mechanical, Electrical Engineering or an equivalent discipline.
• Knowledge of plant processes, operations, and safety protocols.
• Relevant experience in power plant operations, or related industries, is advantageous.
• Possession of a 2nd Grade Engineer (Steam) Certificate of Competency or a 1st Grade Engineer (Steam Combustion Engine) Certificate of Competency awarded by the Ministry of Manpower is an advantage.
• Proficiency in Microsoft Word, Microsoft Excel, and Maximo EAM or equivalent software.
• Strong analytical and communication skills, self-motivated, independent, and a team player.
• Willingness to work 12-hour rotating shifts.

Responsibilities:

• Lead and oversee daily activities of assigned staff, providing performance feedback and staffing recommendations.
• Examine test samples and interpret measuring instruments, blueprints, schematics, and operational instructions.
• Develop and implement operating, maintenance, and test procedures in line with laboratory standards and safety policies.
• Coordinate, schedule, and review staff workflow to ensure efficient resource utilization.
• Design and adapt test setups and equipment based on test specifications and engineering requests.
• Prepare purchase and material requisitions, and recommend solutions for test-related issues.
• Collaborate with engineering teams and clients to ensure clear communication of test methods, equipment availability, and results.
• Assist in training and developing laboratory staff, and plan and evaluate tests, providing interpretations and reports.
• Support the development of new test methods and modifications to existing ones.
• Contribute to annual budget planning, capital expenditures, and tactical goals for laboratory operations.
• Integrate continuous improvement practices and adhere to the Underwriters Laboratories Code of Conduct and security protocols.
• Perform additional duties as needed.

Qualifications:

• Diploma or degree in Electrical Engineering or a related field, with at least 6 years of relevant experience.
• Proven ability to manage multiple projects while ensuring high-quality results and exceptional customer service.
• Strong collaboration skills, partnering effectively with Engineering and Laboratory teams to complete projects on time and with precision.
• Expertise in analyzing unique testing needs and performing product safety and electrical performance testing.
• Experience in Electromagnetic Compatibility (EMC) testing or familiarity with ISO/IEC 17025 standards is preferred.
• Skilled at coaching and mentoring junior laboratory staff.
• Excellent communication skills, with the ability to interact professionally with customers.
• Innovative, creative, and team-oriented.
• Proficient in Microsoft Office and able to incorporate automation into testing processes.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description

• Execute day to day safe operation of 105 KTPA PS compact and finished goods packaging operation.
• Responsible for the smooth and safe operation of PS Compact, Utilities and Packaging lines.
• Responsible to ensure product are produced within quality specifications.
• Execute production planning & follow up daily & planned maintenance activities in the shift.
• Troubleshooting & take appropriate corrective actions for Compact and Packaging line in the shift.
• Highlight / Perform segregation for out-of-spec quality product

Job Requirements

• Minimum N or O Level with ability to read, write and speak in English
• Must be able to work 3 cycles rotating shift (Morning Shift 7am to 3pm, Afternoon Shift 3pm to 11pm, Night Shift 11pm to 7am
• Must be physically fit, able to work at heights and perform lifting of 30kg load
• Fresh graduates and/or those without experience are encouraged to apply as training will be provided.

Control Room Operator Functions:

1. Set and adjust indicating, controlling, or timing devices, such as gauging instruments, thermostat, gas analyzers, or recording equipment

2. Move controls to adjust feed and flow of liquids and gases through equipment in specified sequence.

3. Adjust controls to regulate temperature, pressure, and time of prescribed reaction, according to knowledge of equipment and process

4. Activate pumps, agitators, reactors, blowers, or automatic feed of materials

5. Monitor gauges, recording instruments, flow meters, or product to regulate or maintain specified conditions

6. Mix chemicals according to proportion tables or prescribed formulas

7. Record operational data such as temperature, pressure, ingredients used, processing time, or test results, in operating log

8. Read, comprehend, and follow written and oral instructions, safety rules, operating procedures and product recipes

9. Use a computer graphical interface to control Programmable Logic Controller

10. Operate or tend auxiliary equipment, such as heaters, scrubbers, filters, or driers, to prepare or further process materials

11. Operate and monitor utility system

12. Reside as an active Emergency Response Team member

Field Operator Functions:

1. Operate valves and pumps to admit or drain specified amounts of materials, impurities, or treating agents to or from equipment

2. Flush or clean equipment, using steam hose or mechanical reamer

3. Draw samples of product and sends to laboratory for analysis

4. Perform general clean up and maintain good housekeeping in order to keep working areas clean, organized, and safe

5. Patrol and inspect equipment or unit to detect leaks and malfunctions

6. Weigh or measure specified amounts of materials

7. Read, comprehend, and follow written and oral instructions, safety rules, operating procedures and product recipes

8. Use a computer graphical interface to control Programmable Logic Controller

9. Load and unload tank trucks and drums containing hazardous and non-hazardous materials

10. Dump prescribed solid, granular, or powdered materials into equipment

11. Perform incidental maintenance as required to troubleshoot processes and to keep processes running properly

12. Lock out processing equipment to make sure maintenance can safely repair processing equipment

13. Perform laboratory analysis for waste water shipments

14. Train new Chemical Operators on job functions

15. Reside as an active Emergency Response Team member

Requisition ID:R000060450 Mechanical Technician/ Trainee

Job Location: Singapore - Jurong Island

To submit application, please click below posting link or copy and paste to a new browser:

https://chevron.wd5.myworkdayjobs.com/jobs/job/Singapore-Central-Singapore-Singapore/Mechanical-Technician--Trainee_R000060450

Chevron Oronite is accepting online applications for the position of Mechanical Technician located in Jurong Island, Singapore through 29 October 2024 at 11:59 p.m. (Singapore Standard Time).

All interested applicants, please read the Data Privacy Notice before submitting application.

Responsibilities for this position may include but are not limited to:

• Performs maintenance, repair, alignment and testing of rotating equipment and components such as compressors, chillers, centrifuges, pumps and gear boxes, mechanical seal, couplings etc.
• Performs maintenance servicing for pressure relief devices such as Pressure Safety Valve, Breather valves, Emergency hatches etc.
• Supervises maintenance, cleaning, repair and handover of fixed equipment such as boilers, pressure vessels, storage tanks, piping, heat exchangers, fin fans, painting and insulation work etc.
• Reads and understands equipment drawings, datasheets, crane lifting plan, P & ID or other instructions
• Determine materials, tools, manpower and methods required to complete the maintenance task
• Develop Job Safety Risk Assessment for every work assigned. Ensure Safe Work Procedures are followed. Ensure safeguards are followed such as valid permit are issued, wearing prescribed Personal Protection Equipment etc.
• Liaise with operations for system handover; liaise with other functions such as warehouse and equipment vendors for completion of urgent break-in work
• Writes post maintenance reports, communicates findings to relevant work groups; follows and completes maintenance quality assurance checklist
• Assists in troubleshooting equipment with operations and equipment vendors; able to utilize and interpret manufacturer’s operation and repair manuals

Required Qualifications:

• NITEC/Higher NITEC/Diploma in mechanical engineering or related engineering discipline
• Fresh graduate without working experience is also welcome to apply
• Preferably with background in oil & gas, petrochemical, and pharmaceutical industries
• Strong oral and written communication skills.

Preferred Qualifications:

• Able to operate drilling and fixed hoist
• Able to thread piping and fittings for assembly, join PVC piping and tubing
• Able to perform hydro-test of fixed equipment or rotating equipment during integrity/leak test
• Utilize Computerized Maintenance Management System (CMMS). Input into CMMS details such as equipment history, time confirmation, work notification history. Provide feedback post maintenance for continuous improvement

Service Technician - Mechanical

Our culture believes in POWERING YOUR POTENTIAL. We provide global opportunities to develop your career, make your community a better place and work with today’s most innovative thinkers to solve the world’s toughest problems.

We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That’s what #LifeAtCummins is all about.

We are looking for a talented Service Technician - Mechanical to join our team based in Tuas, Singapore. This is an Onsite role reporting to the Service operation Manager. This role will also require travelling within Singapore. Reporting to the Service Supervisor, this role provides support for all Cummins products, primarily in Automotive, Industrial and Marine applications, in a combination of workshop and field work. You will respond to engine breakdowns and provide technical analysis of failure, warranty support and troubleshooting engineering issues. Previous experience in a similar Service role, and knowledge of High-Speed Diesel engines, is essential.

This position offers a long-term career with a global organisation in the power industry and could be the next step in your successful Service career.

In this role, you will make an impact in the following ways:

Responsibilities:

· Diagnoses and completes repairs to engines at the customer’s site.

· Engages customers in a courteous and professional manner. Anticipates and ensures prompt and efficient attention to customer needs.

· Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete less complex repairs, including identifying and preparing required parts and tools.

· Performs preventative maintenance activities as per documented schedules and standards on engine and related components in the field.

· Escalates unresolved issues to more experienced Field Service Technicians and/or Supervisor.

· Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens.

· Identifies additional service opportunities with customer.

· Completes training in line with skill and business requirements.

· Maintains service vehicle and tools for cleanliness and proper operation.

· Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues / incidents to site management and to their supervisor.

To be successful in this role you will need the following:

· Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.

· Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.

· Customer focus - Building strong customer relationships and delivering customer-centric solutions.

· Develops talent - Developing people to meet both their career goals and the organization’s goals.

· Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.

· Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.

· Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.

· Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.

· Electronic Service Tool Application -Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.

· Product Repair and Maintenance -Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.

· Engine Systems Interactions -Interprets and analyses the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.

· Health and Safety Fundamentals -Champions and models proactive health and safety behaviours by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.

Preferred Qualifications:

· Apprentice Trained Engine Technician (Preferred)

· Vocational diploma from relevant technical institution

· Locally valid driving permit

· This position may require licensing for compliance with export controls or sanctions regulations.

· Basic level field service work experience

. Good to have work background either mechanical or electrical or both.

· At least 3 years relevant work experience preferred.

· Intermediate level knowledge of and/or experience with engine products

· Customer service experience

· Preferably with Singapore Class 3 or above driving license.

· Able to write and speak in English language.

· No cross-border relocation support provided.

Compensation and Benefits

· Salary rate commensurate with experience. Flexi Benefit. Variable Compensation (bonus). Annual Salary Review. Life Insurance. Medical / Hospitalization Insurance.

At Cummins, we are an equal-opportunity employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, colour, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Job Description:

The Part-Time Specialist – Centre Management System Support is responsible for ensuring all exhibits, audio-visual equipment, facilities, and essential services are available daily to support daily operations for centres/museums under Defence Collective Singapore (DCS), creating a safe, functional, and comfortable environment for employees, visitors, and customers.

The Part-Time Specialist may also be converted to a Full-Time role after assessment by the relevant reporting officer which proves his/her aptitude, suitability and adaptability in the current role.

Responsibilities:

• Daily Startup & Shutdown of Facilities, Exhibits, Attractions & Projection Systems.
• Maintenance and Repairs: Perform routine maintenance tasks, including plumbing, electrical, exhibition and gallery equipment, HVAC, and mechanical repairs to ensure the proper functioning of facilities and equipment.
• Building Systems: Monitor and maintain building systems such as heating, ventilation, air conditioning (HVAC), fire protection, and security systems to ensure compliance with safety standards and regulations.
• Contractor Coordination: Coordinate with external contractors, vendors and service providers for specialized repairs, installations, or renovations as needed. Supervise and inspect the works of contractors and the works of the 2 service providers (cleaning, housekeeping, landscaping, pest control, car park and security). To ensure contractors’ compliance to safety, regulations and level of standards set my DCS.
• Event Setup: Setup of logistics inclusive but not limited to AV Systems, Furniture, and equipment for events & daily organised visits.
• Inventory Management: Maintain inventory levels of supplies, tools, and materials needed for facility maintenance and repair activities. Recommend buying of critical spares and consumables for various facilities repair and improvement and participate in facilities improvement projects.
• Emergency Response: Respond to emergency situations, such as power outages, equipment failures, fire emergency/incidents or building damage, and implement appropriate measures to mitigate risks and minimize disruptions.

Requirements:

• N-Level/O Level/ NITEC/ Professional Certificate
• Preferable with 1 year working experience in similar roles. Fresh graduates are also welcome to apply.Demonstrated ability to communicate effectively, including proficiency in clear, concise, and compelling oral and written communication in English.
• Demonstrated ability to work independently and under pressure and to manage multiple concurrent tasks and responsibilities while dealing with changing priorities.
• Familiarity with computerized maintenance management systems (CMMS) or facility management software for work order management and asset tracking
• Withstand various strenuous activities such as frequent walking, prolonged standing, climbing ladders, bending, and kneeling without restriction.
• Physical stamina and mobility to perform manual labour, lift heavy objects, and work in various environmental conditions.
• Able to work on rotating shifts, weekends, and public holidays. Flexibility to work flexible hours, including evenings and weekends.

Benefits:

• Uniform provided.
• Transport reimbursement.
• Able to convert to Full time staff.
• Free SDC Adventurer Membership after 1 month deployment.
• 20% for dining at Bottle Tree

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• To have a role in VSAT product development team that participates in designing of LNA and Power Amplifier.
• Operating up to Ka band frequencies, the Up/Down Converter facilitates communication as part of its functionality.

Requirements:

• Bachelor’s Degree in Electronics Communication Engineering or equivalents.
• Minimum 3 years of experience in any RF systems.
• Experience in RF circuit design (LNA, PA, Up/Down Converter, Synthesizer).
• Experience in using simulation software.
• Experience in VSAT system or subsystem design.

____________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Perform daily batch processes in accordance to SOP and comply strictly to safety, quality and environmental guidelines.
• Perform equipment line-ups and operate reactors in accordance to established practices and procedures.
• Charge chemicals into reactor manually.
• Carry out drumming operations as and when required.
• Report all process/equipment/environmental abnormalities, incidents and/or near misses to Shift Superintendent/Engineer/Production Manager. Take part in further investigation when required.
• Adhere to Company and departmental procedures, SHEQ rules and regulations, and GMP at all times.
• Carry out scheduled housekeeping activities.
• Ensure proper handover and takeover during shift changes.
• Participate as CERT member.

Requirements:

• ITE Certificate/ Diploma in Engineering (Chemical), Engineering (Industrial), Engineering (Material Science), Engineering (Mechanical), Engineering (Petroleum/Oil/Gas) or equivalent.
• Relevant working experience in chemical industries.
• On-the-job raining will be provided for entry level.
• An effective team player with good communication skills.
• Must be able to work on 12-hours rotating shift in Jurong Island.
• Remuneration will commensurate with qualifications and experience.

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

Responsibilties

- Liaise with immediete Supervisor in any high risks work to be carried out.

- Maintain good Housekeeping at end of work completion.

- Carry out instrument preventive maintenance and servicing & instrument emergency on call servicing and troubleshooting.

- Conduct instrument on-line calibration and checking.

- Control valve overhaul, servicing and calibration.

- Conduct / implement work permit system on site.

- Conduct function check of instrument loop (analog and digital signal)

- Troubleshoot and solve problems of instruments and advise on the proper repair.

- Understand flow and loop diagrams, installation diagram and specifications for installation of all type of field instruments.

- Run conduits, pull wiring, terminal wiring and functional check.

- Perform plant pre-commissioning and commissioning.

- Monitor and supervise third party maintenance and servicing activities as required.

- Ensure all documentation and procedures are up to date and adhered to.

- Check and prepare instrument calibration reports.

Requirements

- ITC/D|diploma in Electrical/lnstrumentation

- Minimum 3-4 years of relevant experience in process lndustry

- Working knowledge of P&ID drawing, loop diagram, hookup drawings, logic diagrams and single line diagram

- Knowledge about field instruments, DCS and PLC systems

- Ability to work independently at customer's, sites

- Understanding of local/international Process lndustry Codes and Practice Good written and spoken English language skills

- Good technical competence