Under strict supervision, conducts tests on materials, components, subassemblies, and tools. Acquire basic knowledge of test procedures and techniques. Documents test procedures, data, observations, and results. Assemble components for prototype tools and for tests. Acquire basic knowledge of assembly tools and techniques. Documents assembly procedures and techniques. Learns and applies company sanctioned standards and specifications. Acquire basic knowledge of materials, components, and their application. Incorporate Reliability, HSE and Quality analysis techniques in all job processes. Error is readily ascertainable by the supervisor and can be corrected in relatively short time frames. Entry level position, no experience required.

Senior E&I Technician (WDA)

• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on the Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.

WHAT YOU WILL DO

Responsibilities include, but are not limited to:

• Provides support to complete work activities timely, efficiently, and satisfactorily.
• Apply Safety requirements in all aspect of day to day work.
• Follow up and continue with the previous shift or day incomplete work.
• Provides simple troubleshooting and diagnostic of equipment failure to determine the root cause and perform immediate corrective actions. Use Root cause analysis method for difficult or complex problem.
• Standby for any emergency repair after office hours / weekends and public holidays.
• Provide regular communication to stakeholders like operations and maintenance teams about equipment status.
• Maintain utility equipment like Chiller, Cooling tower, cold rooms, air compressors efficiently and reliably and to support production activities.
• Knowledge in instruments like temperature, Humidity sensors calibration.
• Maintain facilities in upright condition.
• Provide response to Alarms from utility equipment timely.
• Any other duties as and when assigned by the Supervisor / Manager

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• NTC / ITC / Diploma in Electrical Engineering or Mechanical Engineering or Instrument & Control engineering or its equivalent
• 3 - 5 years of working experience in Utilities and Facilities or electrical/instrumentation field in the Petrochemical or Chemical or Oil & Gas or other related industries
• Simple report writing skills

Preferred qualifications:

• EMA electrician’s license will be an advantage.
• Knowledge of cGMP and good documentation practice will be an advantage.

We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another’s thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace

To handle and support on business development activities in expanding data center business in regional market.

Planning and Specification

• To identify Data Center customer’s needs and enhance the company’s chances of securing orders.
• Conduct company and product presentation for owners, consultants, and any other new external stakeholders.
• To spec in our brand and product into consultant and owner’s vendor list, influence them to apply our brand.
• To work closely with cross functional team, like Engineering, QA, GSC and any other on handling inquiries.

Business Development

• To identify and engage new Data Center customers and consultant, obtain new contacts for key account and regional managers.
• Develop and maintain knowledge of consumers, competitors, and market trends through engagement, to support on market analysis.
• To lead on global purchase / LOA agreement inquiries from customers.
• Stay up to date with industry best practices and standards through attending events and seminars, attending individual and group training programs, and reading industry publications and newsletters.
• Communicates the information acquires to superior for the purpose of maximizing on sales opportunities, keeping the department and the business at par with the latest trends and best practices, giving the business a competitive edge and solidifying its position as a market leader.
• To identify and expand business into potential industry segments, develop market entry strategies, engage potential business partners to spec in and obtain enquiries leading to order.

Sales Activities

• Meet with Data Center customers/dealers to discuss their evolving needs and to assess the quality of our company’s relationship with them.
• Networking through attend exhibitions, seminar and any other activities that can enhance our brand awareness as well as building connections.
• To handle Data Center inquiries and project tenders on assigned region by superior.

Product Development

• Collaborate with engineering and marketing team to identify opportunities for improving existing products and marketing materials, based on market demand and latest advancements.
• Gather feedbacks from clients and dealers, and channel it to engineering, QA & GSC for product and services quality improvement.
• And any other ad hoc task request from superior.

Requirements:

• Diploma or Degree in Mechanical or Electrical or any equivalent Engineering
• 3 years of related genset and data center sales experience preferred
• Proven regional Sales Engineer experience in a relevant industry
• Experience on handing distributor, key accounts & customers
• Possess technical presentation skills
• Proficiency in Microsoft Excel - Pivot Table and Advanced Formulas & Analytics
• Effective negotiation and influencing skills
• Having strong ice-breaking and engagement abilities.
• Able to work on any ad-hoc task
• Willing to travel and within short notice

Provide technical support to daily plant operations to ensure safety and efficiency.

Perform regular and ad-hoc maintenances of production facility.

Implement process improvements to improve production safety and quality.

Work in compliance with safety and environmental standards.

Promote production safety by enforcing security procedures and hazardous controls.

Attend to equipment repairs and problems promptly.

Perform routine inspections to identify any malfunctions and replacements.

Monitor production operations to identify dangerous and hazardous conditions.

Maintain the work area safe, clean and organized.

Provide cost-effective solutions for optimal production operations.

Analyze and diagnose production problems in a timely manner.

Maintain complete documentations of production maintenance and repair works.

Ensure safe, smooth and uninterruptable plant operations.

Plant Operation

Support plant goals and objectives to achieve overall site KPI’s.

・Comply safety guidelines, SOP, policies and standards.

・Intergrade safety to all part of work and provide safety suggestions and improvements.

・Timely inform all unsafe activities, environmental release etc.

・Support shift activities includes but not limited to operation, frontline maintenance, plant start-up & shutdown and any other ad-hoc and urgent calls.

・Monitor and Operate Incinerators, boilers, turbine/generators and auxiliary systems includes but not limited to feed water treatment plant (Demin), compressed air system, fuel oil system, NH3 System, potable, rain and waste water systems etc.

・Perform shift logging and ensure equipment’s are operating within safe operating limits.

・Inform plant safety and other abnormal events timely.

・Involve in equipment/system isolation & normalization as part of plant activities.

・Respond to CCR alarms and perform frontline troubleshooting. Unresolved items raise maintenance notifications.

・Perform water sampling and ensure chemical injection system functionality as intended.

・Receive operation related chemicals, Lime, Fuel oil, NH3 etc.

・To assist operation & maintenance engineer in fulfilling their responsibilities.

・Carry out plant improvement activities.

・Maintain proper housekeeping as well as tidiness of work areas.

・To carry out any other duties as assigned by O&M Team.

・Oversee and handle maintenance activities as assigned during overhaul.

・Oversee and supervise external contractors.

Plant Optimization

· Identify safety improvement and implement energy & water saving initiatives.

· Assist maintenance team during maintenance.

· Monitor and keep track of utilities consumptions and generate reports as and when required

· Involve in Facilitate project works as well as plant improvement activities.

· Suggest and execute plant improvements initiatives.

Requirements

· NITEC / Diploma in Mechanical / Electrical / Industrial.

· Emergency Response Trained & First Aid trained.

· Confined space trained.

· Work at height trained.

Job Description:

• Main role to perform maintenance and repair on buses
• Carry out component repair when needed
• Diagnose malfunctions in defective parts by using diagnostic tool to determine the problems from various parts of the buses, including but not limited to, to ensure that they are in proper and safe working condition to operate effectively

- Brake and drive systems

- Battery system

- Pneumatic system

- Air-con system

• Must ensure high standard of workmanship and minimize turnaround time for repairs and inspections to meet workshop’s service standards and according to job order.
• Adhere to defined guidelines in regard to safety, orderliness and etc.

Job Requirements:

• Applicants with NITEC in Automotive Technology (Heavy Vehicles)
• Higher Nitec or Nitec in Automotive Technology, Mechanical, Electrical or Electronics.
• Minimum 1 to 2 years relevant experience in a similar industry
• Candidates must be sound in basic automotive skillset.
• Have knowledge of handling diagnostic tools, interpret and solve fault codes.
• Preferably with Class 4 Driving License
• Team Player
• Details oriented
• Able to work in fast-paced working environment
• Salary commensurate with experience

• Location: Penjuru Place, Jurong East
• Company bus pick-up provided at MRT Jurong East, West Gate
• Competitive base salary + OT + 1 month fixed bonus, medical & insurance
• Comfortable working at night during peak season/ when required due to critical issues

The Maintenance Technician will carry out all planned and unplanned maintenance activities across mechanical & electrical equipment to ensure minimal disruption to the manufacturing process.

Job Responsibilities:

• Execute responsive, preventative and predictive maintenance requirements to all machines/equipment in the Well screen Technologies facility to ensure maximum production levels.
• To perform day to day activities in accordance with the planned maintenance program.
• Carry out daily inspections of all the Well screen Technologies ancillary equipment.
• Maintaining all High and Ultra High Pressure pumps, water chillers, booster pumps, water treatment, slotting machines, weave and plate machines, laser and abrasive removal system as per the maintenance schedule or as required.
• Carrying out upgrades to equipment as and when planned in accordance with safe working practice.

Job Requirement:

• Comfortable working at night/ running night shift during peak season/ as & when required due to critical issues
• working 5 days/ week + OT
• Comfortable working at Penjuru Pl, Jurong East.
• Min 2 years of experience with manufacturing & maintenance background
• Strong mechanical knowledge in pumps, motors, centrifugal, and double diaphragm pumps.
• Basic electrical & electronic knowledge & experience
• Willingness in supporting facility maintenance around 5-10% basis.

Responsibilities:

1. Assist in project management and co-ordinate with in-house developer, vendor, customer and business stakeholders to ensure projects meet project scope, budget and schedule with proper project plan
2. Translate requirement from business unit to applications
3. Analyze user's requirements, feasibility, cost, time and resources required, compatibility with current systems, potential problem area and recommending solutions for projects
4. Responsible for the maintenance of application changes request
5. Provide application support, including but not limited to conducting training to users, application server maintenance, data analysis
6. Responsible for creation of all system documentations, and to ensure that they are kept up to date.
7. Work closely with external vendors and internal uses in the development/support of the new system

Job Requirements:

1. Diploma/Degree in relevant discipline or relatable working experience in IT field
2. At least 4+ years of working experience in participation of business application development, technical and business analysis
3. Understanding of Software Development Life Cycle (SDLC)
4. Application/Software design, development, integration, testing experience
5. Facilitation, negotiation and conflict resolution skills and demonstrated success at building teams and relationships with key stake holder in a project
6. Strong written and verbal communication skills
7. Analytical skills and attentive to details
8. Able to work independently without supervision
9. Liaising work and vendor/client management

Others Information:

1. 5-days work week
2. Meal allowance
3. Medical, dental & insurance benefits
4. Company Transport: 2 ways from Jurong East

Description

5-10 years’ Experience in Cnc Turning with Master Cam/UG Programming

2D & 3D Programme with Designing Knowledge

Multi task work

Need to operate CNC Milling and CNC Turning Machine

Need to work Night shift

Need operate the Conventional Machines when it is necessary

Requirements

Diploma/ITE Singapore

5-10 Years Experence in Precision /OIl & Gas Experience

SINGAPOREAN ONLY

Contact Ravi +65 90627715 (WhatsApp)

Mom Lic No-08C4221 (Reg No-R1102427)

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Implement and maintain Linux-based and Window-based systems.
• Setup, configure and manage Linux/Windows OSes on lab PCs.
• Setup, configure and manage Hyper-V and Windows-based servers.
• Monitor system performance and troubleshoot any issues that arise.
• Perform maintenance tasks such as system backups, updates, and patches to ensure secure and efficient network operations.
• Manage user access permissions to SSH, NFS shares, Apache, Nginx, Samba.
• Manage user access permissions to RDP, file shares and IIS.
• Manage AD account and group policies management.
• Monitor and analyse server performance tuning and status monitoring, security, maintenance and troubleshoot issues to ensure optimal system performance and availability.
• Create, migrate, clone, snapshot, backup, recovery and troubleshooting of Hyper-V hosted VMs.

• Bachelors degree in Computer Science/Information Technology/Engineering or equivalent.

• Minimum 3 years of experience in Linux and Windows system administration.
• MCSE or MCSA certification preferred.
• RHCE or RHCSA or ComTIA Linux+ certification preferred.
• Strong knowledge in Bash, Python and Ansible.
• Strong knowledge in Linux operating systems, including CentOS, Rocky Linux, and Ubuntu OSes.
• Strong knowledge in Apache and foreman.
• Understanding of network and storage technologies, including DNS/DHCP.
• Excellent troubleshooting and problem-solving skills.
• Strong communication and collaboration skills.

1. Assist to the Engineering Manager to overview the engineering and design aspect upon confirmation of project. Based on Technical Agreement/ Specification, GA. Contract Requirement, and Scope of supply etc. via contract review to carry out design.
2. Co-ordinate with Engineering Manager, Purchasing Department and Production Department to generate drawings.
3. Preparing Drawing and submit for Approval; liaise with Customer/ Class on Technicality aspect to finalized on the design.
4. Based on Feedback/ Comments to prepare Working Plan incorporating all comments, and assist to Purchasing Department on the Material Requisition for Clarification of Approval.
5. Generate Test Protocol based on design output for the Commissioning Engineer and submit for approval. And prepare Instruction Manual and “Final Drawings” for Submission.
6. Carry out product inspection and in-charge of product quality conforming to Standard; issue Non-conformance Report for Irregularity and assist in Rectification.
7. Seek and improve performance of product/ equipment and production process.
8. Attend to site meeting and inspection to verify work carry out by production team and provide solution to solve difficult site problem.
9. Liaise with GM, Production Department for the range of standard product and detail design of all in house products.

REQUIREMENT

1. Degree in Marine Engineering of HVAC System/Equivalents.

2. At least Three (3) Years Related Experience in HVAC System.

3. Good Office Coordination Skill/Interpersonal Skill.

4. Independent and Resourceful.

5.Expert in Microsoft Office and Auto Cat Software.

• To support and maintain the ASRS (Automation Storage and Retrieve System) and its equipment for the logistics operations.
• To carry out continuous improvement to eliminate the ASRS and its equipment breakdown.
• To carry out planned maintenance of the ASRS and its equipment as per scheduled.
• To carry out routine checks to ensure the smooth operation of ASRS system.
• Carry out repair and troubleshooting of equipment breakdown.
• To maintain correct spare parts safety stock and replenishment.
• Any other duties as assigned by the Superior from time to time.

Requirements

• Diploma in Mechanical and Electrical Engineering or relevant certification from recognized institutions.
• Proficiency in MS Office (Excel and Words)
• Familiar with AC installation up to 400/480 volt and DC up to 24 volt.
• Familiar with wiring diagrams, symbols, and electrical measuring.
• Familiar with electrical/mechanical drive technology (e.g. motors and gears).
• Familiar control technology (e.g. controls/inverter).
• Forklift license will be an added advantage.
• Good working attitude, teamwork oriented and ability to learn new tasks.
• Must be able to work at heights exceeding 40 meter.
• Must be able to work on rotating shifts.

1. Carryout structural repair & modification of electro-hydraulic driven machinery locally as well as in the region.
2. Carryout mechanical & hydraulic dismantling & assembly works.
3. GCE ‘N’ level, ITE in Fabrication Technology with 3 to 5 years’ experience.
4. Willing to travel when required and situation permits.
5. Possess Class 3 driving license.
6. The position is based in Singapore, overseas travel will be required.

Duties and Responsibilities

· Perform commissioning activities, such as Electrical functional tests, dynamic commissioning, completion of functional checks, and complete mark up on as-built drawings.

· Assist VENDOR’s Engineer in commissioning VENDOR’s packages.

· Carry out housekeeping and maintenance of tools and test equipment.

· Carry out the preservation of equipment.

Functional Interfaces

· CONTRACTOR’s Discipline Supervisors

· CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

Profile Requirements

· Qualification: Diploma in Engineering/ Singapore Technical Certificate/ National Trade Certificate/ Skill

The Role

Working with an industry market leader and alongside a highly dedicated team, the Field Service Technician will report to the Service Manager and Field Service Manager. The role will provide strong technical and maintenance support for our customers by performing planned maintenance or non-scheduled repairs in a professional manner for mechanical battery electric and internal combustion lift trucks.

Scope of Responsibilities:

• Report to the Service Manager and Field Service Manager regarding on-site repairs and/or maintenance calls and update daily on-site job cards.
• Complete a minimum average number of site calls per day.
• Coordinate with customers on site arrival, departure, truck service availability, and ensure that lift trucks are operating well before leaving the site; ensure that necessary work are completed satisfactorily before seeking customers' acknowledgement on the service job cards.
• Maintain an accurate record of all travel and worked hours for each job using the assigned tablets.
• Maintain the service van condition according to Company standards and ensure scheduled maintenance is carried out on the service van.
• Maintain tools and equipment according to the company standard and report any breakages or loss of tools promptly.
• Replenish and maintain service van inventory to the specific and appropriate levels.
• Participate in and conduct an accurate count during a van stock-take and provide accurate daily cycle count data.
• Ensure that on-site work safety requirements are complied with at all times.
• Understand daily work targets, completed jobs and/or sales of parts.
• Assist in ad-hoc projects or training matrix evaluations, when necessary.
• Perform a reasonable amount of overtime work to support business/customers' needs, when necessary.

The Right Fit:

• Nitec/NTC-2/3 or equivalent in Electrical or Mechatronics Engineering studies
• At least 2 years of working experience in maintenance repair and overhaul in industrial machinery or material handling equipment (lift trucks)
• Good working knowledge in electrical/mechanical aptitude or electro-hydraulic equipment will be advantageous.
• Experienced in customer service will be advantageous.
• Possess strong communication skills and proactiveness to resolve technical issues.
• Must hold a valid Class 3 driving license to drive the assigned service van for field work. Candidates with no driving license will be considered for workshop technician positions.

This position is based at our Branch office located at 15 Tuas Avenue 8, Singapore 639230.

If you are looking for an opportunity to develop a career in a challenging and fast-paced environment with a global market-leading company, please send in your resume today!

1. Carryout equipment commissioning, servicing, and repair of electro-hydraulic driven machinery locally as well as in the region.
2. GCE ‘N’ level, ITE in Electrical or Mechatronics Engineering with 3 to 5 years’ experience working with electrical / electronic systems in port handling or similar equipment.
3. Possess Class 3 driving license.
4. The position is based in Singapore, overseas travel will be required.

JOB SCOPE

Carry out pre-delivery inspection, testing, installation & commissioning, repairs and servicing works for products handled by the company at company's premise or at customer's site. Carry out electrical, mechanical and hydraulic fault diagnosing and repairs for all products handled by the company.

JOB RESPONSIBILITIES

• Carry out pre-delivery inspecton, testing & commissioning, repairs and servicing works for products handled by the company at company's premise or at customer's site.
• Carry out electrical, mechanical and hydraulic fault diagnosing and repairs for all products handled by the company.
• Complete service report including cause(s) of problems, details and detailed parts used for every job completed timely and submit daily with time sheet to the respective supervisor/service engineer.
• Complete daily time sheet and submit daily to the respective supervisor/service engineer.
• Perform installation of attachment according to job specification and installation instruction at customer sites in Singapore.
• Perform retrofitting and modification task and ensure the completed task is compliance with the drawing and instruction provided.
• To handle welding works.
• Handle material preparation for stock like shaft, mounting bracket, manifold block, fitting and hose guide etc.
• Any other duties as assigned by the service management.

Duties and Responsibilities

· Perform commissioning activities, such as Instrument functional tests, dynamic commissioning, completion of functional checks, and complete mark up on as-built drawings.

· Assist VENDOR’s Engineer in commissioning VENDOR’s packages.

· Carry out housekeeping and maintenance of tools and test equipment.

· Carry out the preservation of equipment.

Functional Interfaces

· CONTRACTOR’s Discipline Supervisors

· CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

Profile Requirements

· Qualification: Diploma in Engineering/ Singapore Technical Certificate/ National Trade Certificate/ Skill

WE ARE HIRING EXPERIENCED SUBSTATION AUTOMATION SYSTEM (SAS) ENGINEER / DCS ENGINEER HAVING SITE EXPERIENCE & KNOWLEDGE IN THE FOLLOWING PRODUCT

ü ABB - RTU560 FAMILY , MICROSCADA , 800XA , S+ / SIEMENS – SICAM PAS , WINCC , RTU: A8000

ü IEC 61850, MODBUS, IEC 103 PROTOCOLS

ü IEC 101, IEC 104, OPC PROTOCOLS

ü DLMS (IEC 62056) METERING PROTOCOL

ü SCRIPTING KNOWLEDGE

ü GOOSE CONFIGURATION

ü UNDERSTANDING OF PRTOECTION SCHEMATIC

ü EXPERIENCED IN P&ID.

ü 3RDPARTY IED & SCADA INTEGRATION

Assembly, Maintenance & Overhaul Technician

Are you an Assembly, Maintenance & Overhaul Technician looking for a new opportunity?

Are you passionate in delivering all types of solutions to your customers?

Join our Drilling Services Team!

Our Drilling Services AMO Team is best at maintaining the latest products of drilling equipment in Baker Hughes. We collaborate with our service delivery teams in science, mechanical and electrical engineering, physics, geoscience, to develop innovative drilling tools.

Partner with the best

As the Assembly, Maintenance & Overhaul (AMO) Technician, you're to troubleshoot, test, assemble, disassemble, and perform visual inspection of electro-mechanical assemblies. You're also to review procedures for assembly, disassembly, and test verification accuracy. You're to assist in the preparation, development, and enhancement of maintenance procedural documentation within the Drilling Services team

As the AMO Technician, you will be responsible for:

· Troubleshooting, testing, assembling, disassembling (Parts & Equipment) and perform visual inspection of electro-mechanical assemblies.

· Configurating test stations and systems. Analyzing and interpreting data from environmental tests.

· Providing solutions to difficult technical problems. Perform inspection and disposition of parts & equipment.

· Assisting in setting up experiments and recording experimental data in collaboration with Engineering and Reliability groups

· Maintaining equipment records and filing systems as part of quality control and assurance programs.

· Evaluating maintenance processes for potential improvements in quality, reliability, turnaround times and costs. Compliance with HS&E policies and procedures

Fuel your passion

To be successful in this role you will:

· Have ITE or Technical diploma or Equivalent.

· Have ability to read, write & speak English language.

· Have maintenance related experience in electro-mechanical function or in relevant industrial experience (aerospace, military, oilfield, automotive, electronic).

· Have proficiency in reading and interpreting blueprints, wiring diagrams, assembly prints and parts lists.

· Have excellent soldering and assembling skills.

· Have analytical ability to find solutions towards complex technical issues.

· Have demonstrate systematic approach towards troubleshooting.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

· This role is a shift based working pattern. Please talk to us about the specific working patterns available when you apply.

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we must push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

· Contemporary work-life balance policies and wellbeing activities

· Comprehensive private medical care options

· Safety net of life insurance and disability programs

· Tailored financial programs.

· Additional elected or voluntary benefits

Duties and Responsibilities

· Perform commissioning activities, such as calibration, functional tests, dynamic commissioning, completion of functional checks, and complete mark-up on as-built drawings.

· Assist VENDOR’s Engineer in commissioning VENDOR’s packages.

· Carry out housekeeping and maintenance of tools and test equipment.

· Carry out the preservation of equipment.

Functional Interfaces

· CONTRACTOR’s Discipline Supervisors

· CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

Profile Requirements

· Qualification: Diploma in Engineering/ Singapore Technical Certificate/ National Trade Certificate/ Skill

Responsibilities:

• Install and service casino management system & gaming equipment
• Monitor and carry out all scheduled preventive maintenance programmes for electronic gaming equipment
• Ensure compliance with Casino Regulatory Authority and other statutory requirements, established policies, standard operating procedures, internal control & service standards

Requirements:

• Meet Casino Regulatory Authority’s statutory requirement of minimum 21 years of age
• Prior experience of 1-2 years in a related electronic industry as Technician preferred
• Diploma/Certificate or equivalent in Electrical/ Electronics/ Computer System Engineering/Mechatronics
• Must be able to differentiate colors for work purposes
• Able to work rotating shifts and on weekends and public holidays

Your Responsibilities:

• Demonstrate strong knowledge in the manufacturing of Downstream processes, including Fermented broth, Protein separation & purification.
• Hands-on experience in operating and optimizing Continuous centrifuge and Homogenizer for efficient cell separation.
• Proficient in the operation of Microfiltration and Ultrafiltration systems, encompassing Hollow fiber and Spiral modules.
• Hands-on experience with Chromatography systems and related downstream processes.
• Practical experience in the Spray drying process.
• Extensive experience in various downstream processes, ranging from small scale to higher scale.
• Proficient in identifying and resolving issues related to downstream manufacturing equipment and processes.
• Experience in Microbial downstream processes, both intra-cellular and extra-cellular, including separation and purification methods.
• Responsible for operating, optimizing, and stabilizing downstream manufacturing processes.
• Familiarity with Contract Development and Manufacturing Organization (CDMO) processes and adept at customer management.
• Proven experience in scaling up downstream processes from small scale to large scale.
• Train and oversee the manufacturing team, ensuring adherence to all procedures during the process.
• Hands-on experience in project-related activities, including equipment qualification and process validation for downstream processes.
• Collaborate with the QA team to prepare all process-related documents in adherence to quality standards.

Your Profile:

• Bachelor’s or higher degree in a relevant field.
• 3-5 years of hands-on experience in downstream manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent communication and team collaboration abilities.

Carry out maintenance activities such as:

• Servicing of equipment such as centrifugal pump, diaphragm pump, replacement of mechanical seal, pump alignment, rigging & lifting.
• Perform repairs and other maintenance activities to specified specs and standards per procedure.
• Able to perform predictive maintenance and data collection for field equipment
• Able to perform QC equipment maintenance and troubleshooting such as freezer and incubator.
• Attend to equipment breakdown and preventive maintenance on short notice during weekends/public holidays.
• Support equipment inspection with vendor representative on tanks, column, pipelines and centrifuge as per RSTO Visual Inspections standards.
• Repair and replace damaged parts to bring equipment back into service timely to support continuous production planning.
• Perform minor piping modification and rebuild of MRO spare part.
• Perform polishing and passivation of vessel internal surfaces according to RSTO procedure.
• Maintain all machine shop tools and equipment such as, and not limited to, welding set, working tooling, lifting gear.
• To actively participate and perform workplace 5S housekeeping.
• Able to contribute and implement Safety Improvement Ideas for CI projects works together with System/Equipment Engineers.
• Perform tasks as defined in the Maintenance Work Orders for assigned equipment or system.

Safety, Health & Environment:

• Comply with all RSTO’s Safety, Health & Environmental (SHE) requirements, never put oneself and others at safety & health risks, and report any workplace accidents, near misses and hazards as soon as practicable.
• Observe all RSTO’s site security measures at all times, and report any suspicious characters/objects & damaged security mechanisms to Site Security immediately.

Lean Production System:

Embody PT Lean Production System (LPS), while demonstrating a continuous improvement mindset and behaviors through the use and application of LPS tools for continuous improvement initiatives.

Job Qualifications:

The following trainings shall follow the latest applicable WSH regulations

• Scissor Lift/Vertical Personnel Platform - Operator
• Confined Space Operation - Worker
• Work at Height – Worker

Job Requirements:

• Willing to perform shift hours as required.
• Minimum of 3 years working experience, including GMP and Pharmaceutical environment
• Proficiency in spoken and written English.
• Computer literate on Microsoft Office, Email operating system, CMMS software.
• Working experience in handling of hazardous chemical.
• Working experience in basic welding and fabrication work.
• Preferred working experience in handling of Electro-polishing Equipment.
• Preferred experience in operating digital video scope.
• Preferred experience in handling homogenizer and centrifuge equipment.
• Preferred work experience in GMP and Pharmaceutical environment.
• Able to interpret P&ID, LOTO mark-up drawings and perform physical Energy isolation processes.
• Able to perform confine space vessel related work.
• Able to support night shift and outside office hours as assigned by RSTO or Task Supervisor.
• Willing to accept 1-Year contract basis.

Tuas and Biopolis, Singapore

ScaleUp Bio is seeking a highly skilled and experienced Quality System Specialist/ Assistant Manager to join our team. The Quality System Specialist/ Assistant Manager will be responsible for establishing and maintaining quality / food safety related systems. These can include document control, change control management , customer complaint, and various audits. The successful candidate will cover both of our facilities at Biopolis (Singapore) and Tuas (Singapore), and will be reporting to the QA/QC Manager.

Your Responsibilities:

• Assist QA Manager in the implementation of food safety and quality systems, actively participate in food safety efforts and ensure all activities conform to good manufacturing practices.
• Manage, plan, implement, and continuously improve the Food Safety/Quality programs in the Scaleup Bio facilities.
• Serve as the Food Safety Team member and is actively involved in all HACCP Plans.
• Responsible for management of the Supplier Programs including complaints management and feedback.
• Manage the conduct of local supplier audits to ensure that suppliers are qualified.
• Lead Change Control Management.
• Manage Document Control Program
• Manage the local Mock Recall exercise
• Assist QA Manager in crisis situations, such as a potential product recall, high profile customer complaint.
• Set up, implement, and maintain HALAL Assurance System. Main liaison with MUIS (Majlis Ugama Islam Singapura).
• Manage the conduct of internal audit program and ensure compliance to requirements of GMP / HACCP pre-requisite programs, Quality systems, Halal assurance system.
• Assist QA Manager to prepare for external audits and ensure agreed audit findings are corrected and preventive measures are put in place.
• Manage the customer complaint handling system – evaluation, investigation and corrective/preventive action planning, implementation and monitoring.
• Work with multi-disciplinary teams to ensure the progress timeline.
• Ensure safe working practice in research labs, pilot plants, and manufacturing facilities to meet or exceed safety goals.
• Any other tasks related to quality system, as assigned by QA Manager.

Your Profile:

• Bachelor degree with 5+ years’ experience or equivalent in Food Science / Food Technology or related field.
• Industrial experience is desired
• Experience in setting up quality system and food safety system in food industry.
• Trained in HACCP/ FSSC 22000 internal audit.
• Lead auditor certification would be a plus.
• Familiarity with microbial communities and fermentation process would be a plus.
• Strong communication and organization skills, be able to multi-task and exhibit a strong sense of urgency in order to accomplish daily tasks.
• Be self-motivated with the ability to manage time and priorities; must be able to work independently in a team environment, maintain a positive attitude
• Strong writing skills and be fluent in English.