Roles and responsibilities

• Troubleshoot and carry out general servicing & repair of hearing aids and earmolds.
• Responsible for production of earmolds and custom-made hearing aids
• Scanning of ear impressions.
• Work closely with regional technical counterpart on product quality issues and control, maintenance, and processes.
• Support new product testing and quality check, update of part numbers and coordinate with technical trainers for product training.
• Work with respective stakeholders on repairs, technical and logistics concerns.
• Develop work instructions and standard operating procedure for new and existing lab equipment.
• Handle phone calls from customers on new orders and repairs.
• Maintain a safe and clean working environment through daily housekeeping inspections and adherence to lab safety practices.
• Ensure that all Laboratory equipment is well-maintained and in good working condition.
• Conduct lab analysis/retest, generate report and follow up on customers’ feedback.
• Actively takes part in operational reviews and continuously improve the quality system, safety & operational efficiency in the lab.
• Ensure accurate and timely processing and updating of repairs and new orders via in-house system.
• Ensure that all consumables are sufficient for daily operations.
• Undertake other job functions as and when assigned from time to time.

Requirements

• ITE / NITEC / Diploma in Electronics Engineering or its equivalent
• Experience in producing of custom moulds (e.g. hearing aids, earmoulds, dentures), soldering and repair of similar products is an added advantage.
• On-the-job training will be provided
• Ability to read and understand schematic diagrams.
• Good communication skills
• Innovative and enthusiastic in solving issues.
• Initiative and able to work independently.
• Team player with a Can-do attitude
• Computer skills – MS Word, Excel, Outlook, etc

Main duties and responsibilities of the successful candidates are to assist the System Manager/ Functional Leads on the maintenance & support of PPM application. This includes:

• Defect Management. Responsibilities include tracking of system defects reported by users; perform analysis and troubleshooting service to verify and confirm the cause of the problem; provide interim or workaround solutions when necessary to minimize disruption to operations; ensure prompt resolution to the defects reported and facilitate users in Problem Report (PR) testing.
• Service Request (SR) Management. Responsibilities include tracking and monitoring of SRs raised; assessment and implementation of SRs according to operating procedures, e.g. data patching requested by users.
• Change Request (CR) Management. Responsibilities include tracking and monitoring of CRs raised, conduct of impact assessment, design & implement solution and facilitate users in CR testing and conduct training when necessary.
• Operations Support. Responsibilities include monitoring and execution of scheduled events such as monthly jobs, financial year end activities, interface testing, support of audit-related activities, responding to calls/ emails from users about issues/ queries with regard to PPM application and provide on-site support when necessary; support scheduled events such as system down-time; investigate and resolve functional and/or performance related and/or integration issues.
• Prepare and submit monthly progress report on summary of the incidents raised and resolved, SR and CR status updates to the System Manager/ Functional Leads.
• Ensure the smooth operation of PPM, including integration withother bolt-on applications, and interfaces with internal/ external interfaces so that the support is not disrupted during normal office working hours.
• Review and update the relevant documentation (inclusive of ARIS diagrams/ models) to reflect changes made to the system. Examples of documentation including the following:
  Functional Design (FD) specification
  Technical Design (TD) specification

Skills & Requirements

• The candidate(s) should possess a Degree in Computer Science, Engineering or Equivalent.
• Minimum 8 years of ASP .NET development experience in a project management and technical architect role, with at least 3 full cycle ASP .NET implementation of comparable scale and complexity in a large organization.
• Project development experience in C# and Microsoft ASP .NET Framework 3.5/ 4.0 and ASP .NET MVC.
• Knowledge of web technology and development experience in ASP .NET, HTML, CSS, javascript, AJAX and jQuery.
• Experience in database design and development in MSSQL and Oracle.
• Experience in coding using Visual Studio and integration with other .NET and SAP applications.
• Knowledge in secure programming standards and ASP .NET programming best practices.
• Knowledge of system testing methodology and analysis with experience in using testing tool.
• Ability to design, develop and articulate solutions based on strategic business or technical requirements.
• Ability to work independently and efficiently, manage timelines and user expectation, and produce high quality deliverables (documentation, presentations and research).
• Demonstrated experience in designing, developing and managing the delivery of enterprise solutions to support business transformation objectives.
• Possess excellent communication and soft skills.

Note: Proceeding to apply on this job post means you have read, understand and agreed to WPH DATA PROTECTION NOTICE FOR JOB APPLICANTS in the link below.

https://www.wphdigital.com/notices

Objective:

Perform production support activities according to EHS guidelines and in a cGMP compliance manner following procedures and instructions.

Major Accountabilities:

• Involve in hands-on execution of the production support and trouble-shooting
• Perform production support activities such as small parts cleaning, autoclaving, area cleaning and housekeeping, equipment surface cleaning, materials/consumables transfers and management of production storage locations
• Support continuous improvement initiatives
• Participate in GMP and Safety audits
• Train team members on-the-job
• Adhere to any applicable EHS requirements
• Commit to a fair and respectful relationship to others and behave in accordance with Novartis Values and Behaviors

Key Performance Indicators:

• Conformance to production, project schedule, measured in time
• Number and severity of process deviations
• Able to collaborate effectively, both internally and externally
• No avoidable HSE and Quality incidents

Job Responsibility:

• Workplace is in Micron's Distribution operation with ASRS, Cleanroom operations, Packaging operations.
• Follow engineer instruction to perform routine maintains & repairs equipment used in warehouse and cleanroom as to ensure that equipment runs optimally.
• Assists engineer to collect data for the equipment performance improvement & evaluation
• Assists engineer on Installation and Qualification of equipment used in the warehouse & cleanroom
• Assists the Equipment Engineer on Calibration, Safety, Quality and Efficiency of equipment at the warehouse.
• Participates in Continuous Improvements Program (CIP), Safety Good Catch & Quality Process
• Responsible for day-to-day trouble shooting of warehouse equipment, and clearance of jams and providing equipment assist.
• Assists in machine, risk assessment documentations
• Supports regular maintenance, cleaning, calibration of equipment
• Collect data from equipment and make continual improvements with Engineer's guidance, in the area of machine performance

Job Requirement:

• ITE/Diploma holder with relevant technical discipline
• Training will be provided using buddy system and coaching from engineers.
• Compensation will commensurate with experience

Role :

Perform engineering duties in equipment installation, testing and after sales service.

Responsibilities:

· Carry out on site equipment installation, testing and commissioning

· Perform maintenance, trouble shoot and repair of environmental machinery and system

· Work in accordance with project scope and schedule

· Any other duties as assigned

Job Requirements:

• Candidate must possess at least ITE certificate (Nitec) / Diploma in mechanical or electrical fields / alternatively, candidates who possess relevant qualifications and experience in machine trouble shooting and repairing
• Knowledge in machine assembly, pneumatic, electrical, control panel wiring and assembly is an advantage
• To be involved in machine installation and commissioning
• Minimum 3 years of working experience
• Possess valid Class 3 driving license is an advantage
• Able to work independently and self-motivated
• Able to work well as a member of a team
• Good interpersonal and communications skill

Working location: Tai Seng

Remuneration packages commensurate with qualifications and relevant working experience.

Interested candidates are invited to email your detailed resume indicating expected remuneration, date of availability, together with a photo to [email protected]

(Only shortlisted candidates will be notified)

(Through your response to our job advertisements, via any channels, you have agreed to register, authorise and give consent to Crescendas Group of Companies to collect, use and disclose your personal data under the PDPA 2012 Singapore for the purpose of your application for employment with our Company. If your application is not successful, your data will be kept in our database for future review.)

Associate Medical Laboratory Technologists (AMLT) are responsible for the daily operations of the laboratory which include phlebotomy, electrocardiogram, spirometry and clinical laboratory work.

Responsibilities

• Perform daily operations of the laboratory
• Perform all procedures in accordance with laboratory standard operating procedures (SOPs)
• Perform phlebotomy, Electrocardiogram (ECG) and spirometry in an accurate, efficient and professional way.
• Perform Point of Care Testing (e.g. Prothrombin Time, glucose) and clinical laboratory tests such as urinalysis (e.g. Urine FEME, dipstick, pregnancy), haematology (e.g. full blood count, peripheral blood film, erythrocyte sedimentation rate, prothrombin time), biochemistry (e.g. HbA1c, neonate bilirubin), microscopy examination (e.g. fungal smear, high vaginal swab) independently.
• Ensure specimen identification, processing and storage of test specimens are in consistent with good laboratory practices
• Perform and verify quality control for all analysers prior to patients sampling
• Use of Laboratory Information System (LIS) to perform functions such as result entry, result validation and tracking for outstanding tests
• Ensure all test results provided for clinicians are accurate and reliable
• Ensure analysers/equipment are functioning properly and are well maintained.
• Notify medical technologist/lab in charge when instrument malfunction and make arrangements with BME or instrument vendor to service the instrument
• Notify inventory person in charge when reagents and stocks supplies run low.
• Perform and record internal and external quality controls and calibrations. Troubleshoot outliers in accordance to work instructions.
• Ensure ‘critical value’ are reported to the relevant personnel within 30 minutes
• Ensure daily maintenance and QC records are up to date.
• Ensure compliance to hand hygiene, workplace safety, International Patient Safety Goals (IPSG) and International Standardization of Organizations (ISO) and other applicable regulatory and accreditation requirements of the laboratory.
• Provide prompt and courteous service in person or over telecommunication to all external and internal customers (e.g patients, doctors, service providers, colleagues).
• Report adverse incidents and all workflow anomaly to supervisor
• Observe strict NUHS personal data protection act and observe internet/intranet cybersecurity guidelines.
• Perform other functions as delegated by supervisor and/or lead laboratory

Requirements

• Recognized Diploma in Biomedical Science, Clinical Laboratory Science or other relevant fields
• At least 1-3 years of experience in laboratory environment and/or relevant experience in phlebotomy preferred
• Good verbal and written communication skills
• Ability to communicate in vernacular languages are an added advantage
• Ability to multi-task and work in a fast-paced environment
• Team player with good interpersonal skills

Patient Service Associates (PSA) provide frontline counter services to patients. PSA is to assist patients by checking patient’s service/order requirement, managing patient queues, handle basic enquiries (e.g. appointment booking) and to provide administrative support to medical technologists and radiographers.

Job Responsibilities:

• Responsible for reception of all appointment and walk-in patients at the Diagnostics counters
• Ensure 2 patients’ identifiers (NRIC & Name) are verified for all patients when handling patient registration electronically (i.e. EPIC, LIS, RIS, POS, BSS.) and verifying tests ordered by doctors.
• Accurate appointment scheduling / booking and registration for eligible mammogram patients via Breast Screen Singapore (BSS) portal
• Registration of mammogram patients are done accurately via BSS portal, including updating of patient particulars such as mailing address and contact number.
• Relevant instructions are communicated effectively to patients prior to their procedures/tests, chaperon patients to changing or counselling room where applicable.
• Handle enquiries and provide prompt and courteous service delivery to internal and external customers.
• Responsible for payment collection when assigned to cashier duties and ensure tally of end-of day sales with cash settlement and other transaction records.
• Ensure Medisave Authorization Forms (MAF) are filled in accurately with patients’ endorsement and approval, and all Medisave transactions are captured accurately in EASIPOS
• Accurate application of promotions and discount vouchers appropriately and to validate its utilization via EASIPOS
• Support administrative function to centre in-charge including but not limited to dispatching of lab and x-ray reports, proper record and documentation of courier services.
• Performing duties as assigned by reporting officer
• Meet customer service and quality KPI as determined by department
• Follow up and support reporting officer in handling patient relation issues
• Adhere to policy and standard operating procedure
• Accurate and meticulous in performing cashiering duty when assigned

Job Requirements:

• GCE “A”/ “O”/ “N” levels or Higher / NITEC qualification
• Service-oriented and patient-focused
• Proactive and resilient with the ability to work independently and in a team
• Ability to multi-task and work in a fast-paced environment
• Good writing, interpersonal and communication skills
• Aspire for service excellence and process improvements

Additional Information:

Working Hours : 42 hours/week (5.5 days work-week)

Working Location : NUHS Diagnostics Clinics (within National University Polyclinics at the Western region of Singapore)

Job Responsibilities:

• Responsible for deployment, maintenance, upgrade, and support of ICT infrastructure, including but not limited to:

-Firewalls

-Network

-Windows Servers

-Virtualization (VMWare/Hyper-V)

-Storages

-Backup Solutions

-Microsoft 365

-Microsoft Azure

-AWS

• Responsible for customers’ power maintenance, upgrade of firmware and patching of systems.
• Ensure continuous delivery of IT services through oversight of service level agreements with business users and monitoring of IT systems performance.
• Manage the IT Asset Management including hardware and software license management.
• Be prompt and meticulous in updating of daily incidents handled into the incident management tool.
• To be highly customer-focus and diligent towards providing good customer service.
• Other duties such as annual DRP/BCP test and other tasks assigned.
• Responsible in project implementation and migration for client’s infrastructure upgrade or new start-up environment.
• Perform end-to-end service delivery to meet the clients’ requirements on implementation, maintenance and support the infrastructure systems.
• Responsible on infrastructure project which include understanding user requirement, solutioning, conduct UAT, implementation and run live.
• Responsible for supporting and implementing both IT and Cloud infrastructure.
• Able to work independently with minimum supervision and work as team when required.

Job Requirements:

Experience:

• Diploma/Bachelor of Science in Computer Science/Computer Information System or equivalent.
• Minimum 1 year of experience, System Integrator environment preferred.
• Proven experience in IT support services field.
• Practical skills and experience in the following:

-Firewalls

-Network

-Windows Servers

-Virtualization (VMWare/Hyper-V)

-Storages

-Backup Solutions

-Microsoft 365

-Microsoft Azure

-AWS

• Understanding on network and server fundamentals.
• Practical experience in effective time management, including ability to prioritize & multitask
• Demonstrated ability to apply IT in solving business problems.

Skills:

• Fluent in spoken and written English
• Excellent communication and project coordination skills
• Knowledge in Windows Server 2003/2008/2012/2016/2019 environments.
• Basic knowledge in networking switches and port management
• Capability of seeing the tasks assigned holistically, able to break-down the task in detail and follow-through end-to-end.
• Good communication as this role needs to handle internal and external customers.
• Service oriented engineer to internal and external customer.
• Ability to provide IT training and awareness to other department users.
• Microsoft/Cisco/ITIL foundation certification a plus.

Radiographer is responsible for the providing prompt diagnostic imaging services to the patient, ensuring patient safety and proper care of equipment. Assist Centre In-charge/ Senior or Principal Radiographer to guide and supervise junior and student radiographers when required.

Job Responsibilities:

• Perform general radiographic examinations and/or at least one of the area of specialty including mammography and/or ultrasound and/or Bone Mineral Densitometry.
• Responsible for the safety and welfare of the patient.
• Maintain a clean and safe environment; adhere to safe work practices especially in radiation safety and infection control.
• Ensure proper usage and care for all equipment at the specific diagnostic centre.
• Perform other administrative duties or ad-hoc quality departmental projects/activities as assigned by the reporting officer/ Lead Radiographer
• Apply the ALARA principle for all procedures.
• Responsible for general housekeeping of the allocated diagnostic centre.
• Render prompt and courteous service delivery to external and internal customers.
• Ensure efficient running and operations of their area of responsibility.
• Assist the Radiographer-In-Charge / Senior or Principal Radiographer to ensure quality control procedures are performed diligently.
• Ensure AHPC certification is achieved after one / two years depending on qualification(s).

Job Requirements:

Required Skills and Experience
• Recognized degree in Diagnostic Radiography.
• Professional Licence: R1 license with Centre for Radiation Protection and Nuclear Sciences, National Environment Agency.
• Timely update and renewal of RI license.
• Registration with Allied Health Professions Council.
• Excellent written and verbal communication skills.
• Strong organisational skills and able to multi-task in a fast-paced environment.
• Participate in continuous medical education and quality assurance programs as directed by Radiographer In-charge / Senior or Principal Radiographer.
• Complete all assigned tasks in an organized and timely manner.
• Service orientated and customer focused. Have a compassionate, caring and friendly attitude.
• Able to work in a fast-paced environment and under pressure.
• Effective communications and coaching skills.
• Good team player.

Preferred Skills and Experience
• Mammography and ultrasound experience preferred.
• Ability to communicate in vernacular languages
• Knowledge of basic programming and advanced applications of MS Word, Excel and PowerPoint will be an added advantage.
• Knowledge of NGEMR, Epic usage and RISPACS would be an additional advantage.

(Please note that the working hours is on 5.5 days' work week)

Reporting to Centre-IC, Medical Technologist (MT) is responsible for the daily operations and administration of laboratory to ensure compliance to regulations and accreditation standards. This includes daily routine laboratory work, performing phlebotomy, electrocardiogram and spirometry. MT is responsible to maintain professional care to patients and works closely with NUP and other stakeholders.

Job scope

• Perform patient registration, specimen reception, preparation and packing of specimens
• Perform laboratory analysis (e.g. Urine microscopy, full blood count, HbA1c), operate and maintain instruments according to work instruction.
• Perform point-of-care testing, phlebotomy, ECG and spirometry procedures.
• Responsible to verify and report accurate results in timely fashion; investigates and reports any anomalies.
• Responsible to perform daily quality control check and troubleshoot as required.
• Ensure proper documentations and records for traceability (e.g. acknowledgement on QC and maintenance checklist after completion).
• Assist to resolve patient’s queries and escalate to centre-IC when necessary.
• Adhere to work safety guidelines and infection control protocols to ensure staff and patient safety.
• Assist centre-IC in tasks as assigned.

Qualification

Degree in Medical Laboratory/Biomedical Science or related fields.

Prior experience working at clinical laboratory at public or private healthcare establishment is advantageous but training will be provided

Experience in phlebotomy and heel prick sample collection will be advantageous but training will be provided

Effective communications and ability to converse in vernacular languages is an asset

Able to work in a fast-paced environment and with good problem solving skills

Possess positive attitude in resolving hostile and disgruntled patients professionally

Ability to multi-task and work under tight timelines

Good interpersonal relationship skills and enjoy working as a team

Computer literate – knowledge of MS Word, Excel and PowerPoint will be advantageous

Note : Candidates who are looking for Full Time/Part Time employment are welcome to submit the job application to us

Job Description & Requirements

· To carry out wire rope replacement for port cranes.

· Perform other related duties and responsibility as assigned by superior.

Requirements

· Physically fit.

· Positive working attitude and team work.

Work Location

. PSA Terminals (e.g Brani, Keppel, Pasir Panjang, Tuas)

Optics are critical at KLA and at the core of our tools that are finding defects on wafers and reticles that aren’t visible with the human eye. We do this by using different light sources and nanophotonics to capture images. As an optical engineer at KLA, you’re responsible for developing ultra-high precision optical systems and component designs for complex systems, conducting key optical simulations, modeling and analysis as well as identifying manufacturing issues and developing solutions for these.

Responsibilities:

• Facilitate the optical specifications, lens design, and supplier integration of new optics enabled products for the Optics Development Engineering group.
• Effective use of Code V or Zemax to design low residual aberration generating imaging lenses, relays, spatial/polarization beamsplitters and zoom lenses both from nominal design process to final Monte Carlo tolerance analysis and error budgeting.
• Construct complex system models using above components having all imaging paths with critical parameters needed to produce accurate and efficient raytracing simulations of Strehl/WFE performance, coherent and incoherent PSF size/shape, focal depth of field and pupil, multiple bounce ghost and non-sequential stray light analysis, and polarization ray tracing to quantify transmission, retardance, diattenuation.

Education or experience should include:

• Designing, modeling and analyzing optical systems
• Optical manufacturing processes
• Code V or Zemax Optical software advanced user
• Statistical lens tolerancing
• Ghost and stray light analysis
• Design for manufacturing based on capabilities of Optical metrology
• Specification of precision opto-mechanical assemblies; and
  Data analysis using Matlab or other programs. Any suitable combination of education, training, or experience is acceptable.

Minimum Qualifications

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

Job Description:

• To perform installation, troubleshooting, and repair works for machines
• To test, commission and provide support and training to the end-customer
• Replace spare parts and troubleshoot technical issues
• Conduct annual maintenance and service sales
• Maintain proper service records and spare-parts inventory

Requirements:

• Higher Nitec, Diploma in Mechanical and/or Electrical Engineering or equivalent
• Min 2 years relevant working experience with strong hands-on technical skills
• Able to read and interpret schematic diagrams
• Fluent in English and Mandarin (verbal and written) to liaise with China Supplier
• Willingness to work occasional long hours
• Available for occasional overseas travel for training and customer support

Preventive Maintenance Technician- Troubleshoot, repair and maintain food production equipment- Execute emergency breakdown protocols- Assist in resolving downtime issues- Clean equipment and maintain equipment hygiene requirements for production use, after installation and/or repairs- Collate and coordinate maintenance work, at times need to work with contractor- Comply with cleanliness and safety regulations while setting up and maintaining food manufacturing equipment- Able to perform ad-hoc duty when require- Basic electrical and refrigerator knowledge- Prepare maintenance reports/records in relation to the work assignedRequirements- Minimum 1 Year of experience in maintenance work and engineering field, preferable in food manufacturing- “O” leave / NTC3 or NITEC in Mechanical Enginnering- Able to performance Shift- Willing to learn new skills- Positive work attitude

Job Responsibilities:

• Install mechanical or electrical components as per SOP

• Operating tools, equipment, and machinery when required (OJT Provided)

• Updating records and checklists according to process instructions

Job Requirements:

• NITEC/Diploma in Mech/Electronics or equivalent.

• Prior experience in relevant Industry (Mechanical/Electronics).

• Strong attention to detail, ability to multitask, good communications skills.

• Flexible to work in Shits

• Adequate in both spoken and written English.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

We are seeking a motivated and skilled Infrastructure Technician / Engineer to join our dynamic team. The ideal candidate should have a strong foundation in infrastructure technologies, coupled with a passion for learning and growth.

Oversee infrastructure deployment

• Assist in the configuration of infrastructure such as computer hardware, systems software, and applications software.
• Assist with infrastructure testing and implementation.
• Research emerging cloud and infrastructure technologies.
• Assist with piloting of new tools, technologies, and/or processes.
• Coordinate with third-party vendors for integration of cloud technologies.
• Execute infrastructure operations activities and installation of infrastructure systems according to design specifications.
• Adhere to security requirements and report security issues with infrastructure.

Optimise infrastructure performance and systems

• Support the collation of performance and data performance statistics for capacity planning and reporting of existing infrastructure.
• Assist in infrastructure capacity workload modelling and availability analysis.
• Maintain documentation of infrastructure operations activities, maintenance procedures and tests, and infrastructure optimisation.

Resolve infrastructure-related incidents

• Troubleshoot escalated server, storage and maintenance issues.
• Simulate user problems to resolve operating difficulties.
• Suggest improvements to infrastructure resolution methods and techniques.
• Monitor compliance to procedures and policies for infrastructure- related incidents.

Manage infrastructure upgrades

• Assist with the implementation of agreed infrastructure changes and maintenance routines.
• Document infrastructure change requests and maintenance routines.
• Coordinate planned maintenance and system back-up processes.

Requirements

• Diploma in Computer Science engineering or related discipline.
• Fresh graduates are welcome to apply.
• Two years of work experience.
• Basic understanding of networking concept and protocols
• Good familiarity with various operating systems (Windows, Linux, etc)
• Familiarity with Cloud
• Strong problem solving and analytical skills
• Excellent communication and interpersonal abilities
• Eagerness to learn and adapt to new technologies

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

DNV APAC Power Systems is looking for a Senior / Principal engineer to join the Singapore office to help drive the team's impact to the next level in the region. We are looking for a talented and driven individual with significant power system domain experience to help maximize the opportunities we have in Southeast Asia and the region and provide technical and project delivery leadership for our growing team.

We are working on an exciting range of projects from complex grid connections of renewables and energy storage to supporting utilities across the region tackle the challenges and opportunities of the energy transition.

This is an outstanding opportunity to play a leading role with a growing team (20+ power system engineers in the region, 100 globally) that is working at the cutting edge of power systems in South-East Asia, Australia, and India.

DNV is committed to excelling in the power systems domain in the APAC region.

We have the established tools, process and software and a long term commitment to success for our teams.

We are working on exciting range of renewables and energy storage connections as well as supporting client's decision making on power grid infrastructure across the region.

We understand that we are working in a complex environment and looking for committed team members willing to learn. In return we offer well structured training and development opportunities, interesting work, a great team culture and competitive salary package.

Position Qualifications:

• 6+ Years (Senior Engineer) / 12+ years (Principal Engineer) industry experience.
• Masters in electrical engineering / power systems (PhD viewed favourably).
• Proficiency with power system analysis tools such as PSS®E, PSCAD, PowerFactory and Python.
• Experience working in senior roles within power systems consultancy.
• Experience with complex, high renewable penetration power systems and firm technical understanding of associated challenges.
• Proven ability to project management large consulting packages of work, preferably in the power systems domain.
• Experience working within Electrical Network Operator / Owner viewed favourably.
• Proven experience mentoring and developing electrical and power system engineers from graduate to a senior level.
• Great communication skills and demonstrated ability to build relationships with clients and internal staff.
• Proven track record of business development with power industry clients.
• Fundamental knowledge of power electronics control systems and experience working within an OEM is considered an advantage.
• Positive attitude with a proven ability to foster good team culture.

Sales Engineer ( Robotic system)

Responsibilities

• Sales of Robotics targeted to Hospitals / Hotels / Restaurants etc.
• Aggressively develop and expand existing customer base
• Prepare sales quotation and related document(s)
• Effectively manage and maintain current customer accounts
• Assists in marketing and promotional activities

Requirements

• Minimum ITE / Diploma in Electrical Engineering
• Minimum 2 years experience in electronic and electrical industry sales preferred
• Good command of excellent interpersonal communication skills and customer oriented
• Ability to work independently and resourceful
• Dynamic, result oriented and team player
• Willing to travel

Email your resume to [email protected] on or before 25/06/2024

http://www.infantron.com

The role will require knowledge of audio visual equipment, networking as well as excellent communication and customer service skills.

Core Responsibilities: •

System configuration, Testing & Commissioning of Integrated Audio Visual and Videoconferencing solution.

Work with clients to diagnose and resolve technical issues related to audio visual equipment.

Conduct end user trainings to end users on how to use the Solution(s) implemented.

Diagnose and resolve technical issues, both hardware and software, when required;

Train clients on the proper use and maintenance of audio visual equipment.

Attend to service calls related to equipment breakdown;

Ensure production and updating of documentation such as user guides & etc;

Perform preventive maintenance on audio visual equipment to minimize downtime and extend the life of the equipment.

Stay up-to-date on new audio visual technologies and products and recommend upgrades or improvements to existing systems.

Provide excellent customer service and maintain positive relationships with clients.

Work closely with Engineers from different manufactures like Extron, Crestron, Logitech, etc to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc

Study the schematic drawings to understand the technical & functional requirements to implement each solution

Experience:

Fresh graduate are welcome to apply.

Education Qualification:

ITE/ Diploma in IT/Engineering/Audio Visual

Excellent technical, diagnostic, and troubleshooting skills for AV devices

Experience with data networking setup and configuration.

Good communication, motivational, and interpersonal skills.

Optional Certification

Crestron

Extron

Job Description

Do you want to be on the forefront of innovation? NVE Product Engineers work with the latest in emerging tech nodes for storage solutions that positively affect the world we live in! As Non-Volatile Engineering (NVE) System Integration (Solution) Product Engineers at Micron Technology, Inc., we are responsible for the integration of new non-volatile products into various system solutions (SSD, UFS, uSD). We ensure end-product challenges are solved in the right place for maximum value and streamline overall development effort, complexity and risk. We enable parallel NAND and System development through feature optimization and innovative solutions, demonstrating technical expertise in both sides.

We are at the helm for system triage activities through failure analysis on both NAND Component and System-level to identify source of failure, capable to drive issue-based taskforce to establish solutions to unblock critical system development. We will also innovate system triage methodology through the use of Machine Learning for cycle-time and efficiency improvement.

We strive to drive understanding of NAND Features application in systems thereby supporting validation improvements during NAND development. We also review NAND testing methodology towards required System guarantee.

To enable systems with outstanding performances, we identify non-ideal NAND performance behavior in Systems and path-find solution space to resolve system performance impact. We also drive NAND vs System performance sensitivity evaluations and specifications refinement to improve modelling with better clarity.

Requirements

Successful candidates for this position should demonstrate:

• Analytical skills to deep-drive and path-find technical issues.
• Provide leadership in problem analysis and resolution at network level. Work with groups outside of your department to identify and close technical gaps related to new product integration.
• Highly motivated and adaptable to our fast paced, dynamic and rapidly changing work environment. Flexibility to work for extended hours as required
• Ability to work with a variety of cultures and with multi-functional teams
• Keen interest in NAND-system interaction and technical deep-dives; Prior relevant experience will be an added advantage.

Education

• Bachelor’s or Master’s degree in Electrical Engineering, Electronics Engineering and related disciplines

Job Responsibilities:

• Perform aircon servicing
• Perform repair / installation / replacement of aircon unit
• Attend to Ad-hoc after service matters
• Liaise with Coordinator / Supervisor on job matters and update them on issues, if any.
• Collect payment after every services
• Propose / advise customers on their aircon issue. E.g. Service Contracts / Repairs / Replacement of system
• Responsible for the company van and property
• Willing to take on new job scope if needed
• Other ad-hoc job as assigned

Job Requirement:

• Preferably experienced air con technicians has an advantage.
• Preferably with class 3 driving license.
• Able to work in a team, with good communication skills, work under pressure.
• Able to start work immediately.

Responsibilities:

• Support for CXL Product Failure Analysis from NPI to HVM stage.
• Responsible in fulfilling product yield milestones during both NPI and HVM stages through optimization of test methodology & test flow.
• Develop tool/script to support yield evaluation, data analysis and test correlation, including Product Database maintenance & management.
• Perform CXL characterization to optimize product performance.

Requirements:

• Bachelor/Master’s degree holder in Electrical/Electronic/Computer Engineering/Computer Science.
• Good interpersonal and communication skills.
• Proven good problem-solving skills.
• Good understanding of computing system interface such as PCIe.
• Proficiency in programming languages such as C/C++/ Python/SQL/MySQL.
• Relevant experience in setup & managing of Database data analytics and reporting will be an advantage.