• Perform process optimization & process control to improve manufacturing process meeting predictable yield and reduce waste.
• Perform data collection and monitoring ongoing processes including adjusting machine parameters & settings to achieve desired output.
• Monitor trend and data to improve process stability, reliability and repeatability, design test and experiment for validation.
• Carry out data analysis
• Provide technical support and root cause analysis to resolve process related issues that impact quality, delivery, cost, and output.
• Support process mapping, automation recipe, capacity enhancement as well as new process technology
• Collaborate with Quality and R&D department including product transfer from R&D to production
• Provide training/certification to new staff/operator/technician to operate farm equipment.
• Create and develop process documentation and operating instruction.
• Lead technician to upkeep the equipment in tip-top condition, plan scheduled maintenance and spares.

Job Overview

As a Process Engineer, the primary responsibility is to optimize and improve manufacturing processes to ensure efficiency, quality, and cost-effectiveness. You will be involved in the design, implementation, and continuous improvement of production processes, working closely with cross-functional teams to achieve operational excellence.

KEY RESPONSIBILITIES :

· Analyze existing manufacturing processes to identify areas for improvement in terms of efficiency, quality, and cost-effectiveness

· Develop and implement strategies to optimize production processes and increase overall productivity. Conduct time and motion studies to identify bottlenecks and streamline workflows.

· Drive continuous improvement initiatives by implementing Lean and Six Sigma methodologies.

· Collaborate with production teams to identify and eliminate waste, reduce cycle times, and improve overall process reliability.

· Monitor key performance indicators (KPIs) and implement corrective actions as needed.

· Work closely with quality control teams to ensure that manufacturing processes meet or exceed quality standards.

· Conduct root cause analysis and implement corrective actions for quality-related issues.

· Conduct feasibility studies and provide input on the selection of equipment and technology for new processes.

· Ensure the successful transfer of new processes from development to production

· Collaborate with maintenance teams to ensure the proper functioning of equipment and address any breakdowns promptly.

· Create and maintain detailed documentation of manufacturing processes, standard operating procedures (SOPs), and process parameters.

· Generate regular reports on key metrics, process performance, and improvement initiatives. Present findings and recommendations to management and stakeholders.

· Collaborate with cross-functional teams, including production, quality assurance, maintenance, and supply chain, to achieve common goals.

· Additional duties & responsibilities as assigned by Manager.

REQUIREMENTS :

· Proven experience in a manufacturing environment, with a focus on process optimization and improvement.

· Strong knowledge of Lean and Six Sigma principles.

· Excellent technical & interpersonal skills, resourceful and team player.

· Experience in fully / semi-automated manufacturing environment, familiarity with various manufacturing processes, equipment, and technologies. PLC knowledge is a plus.

· Self motivated, ability to work under tight deadlines.

· Strong problem solving & analytical skills, Excellent communication and Technical reporting skills.

· Proficient in the use of relevant software tools, working knowledge of Solidworks, Auto Cad

· Familiarity with health and safety regulations.

· Degree in Mechanical / Electrical / Industrial Engineering with 3-5 years’ experience in manufacturing environment.

SpaceAge Labs is a Singaporean IoT company building hardware and software products. We are located in Toh Guan area and serve clients across the isalnd and focusing on Water and Landscaping industry.

We are looking out for a passionate colleague who can add strength to our team.

• Calling out for experienced (min.2-3 years) personnel in Site Installation & Technical Support with Electornics / Instrumentation knowledge. (ITE / Diploma / Engineers are welcome to apply).
• Singaporeans/Singapore PR are highly encouraged to apply.
• Job involves both on site and office technical assistance to our clients for installations, troubleshooting and integration to sensors.
• We will provide the required training on our product and platform.
• Ability to read wiring diagrams, panel diagrams, sensor data sheets, connection diagrams, wiring termination is an added advantage.
• Computer knowledge with Basic Excel, Microsoft Word, Power point is required.
• Technical problem-solving and analysis with logical thinking and user perspective approach is required.
• You will engage with stakeholders regularly to review project results, improve quality, and satisfying project requirements.
• Ensure proper recording and filing of technical support related activities.
• Documentation of each project installation, lessons learnt and technical support document preparation will be required.
• Project management tools such as JIRA/Confluence shall be used for reporting and documentation purpose.
• Good interpersonal skill and communication is required especially to handle client calls and support them over phone.
• We are looking for team players with an open mindset and aptitude to learn.
• The working environment is agile and demands constant change and improvement in processes.
• You may also be involved in Firmware QA testing of the products if required (for which training will be provided)
• We are open to allow you to learn other hardware / firmware / software technolgies used by us and explore your interets apart from your routine job.

Job Description:

- Design and develop electronics hardware and embedded software for defense products.

- Collaborate with other engineering teams to implement firmware, drivers, and protocols for embedded systems.

- Write and maintain codes for embedded system using C/C++.

- Design, test, and debug electronic circuits and PCBs.

- Select and source electronics components for new product designs.

- Participate in code reviews and design discussions.

- Ensure software is designed for maintainability and scalability

Job Requirements:

- Degree in Electrical/ Electronics Engineering, Computer Engineering or a related field.

- Fundamental skill in C/C++ and real-time operating systems.

- Knowledge of microcontrollers, microprocessors and digital signal processors.

- Good understanding of electronic circuit design and PCB layout tools.

- Good problem-solving and debugging skills.

Job Description:

- Collaborate with a team of engineers to reviews /implements project/ job specification

- Understand client requirements and how they translate to engineering features

- Adopt design approach such as hypothesis generation, project design and planning, calculations, material preparation, characterisation and testing, compilation of results and analysis evaluation

- Initiate market research and propose design changes to the device to improve user experience: Compactness, durability, cost savings, efficiency

- Utilise CAD design to improve product performance, such as heat dissipation, reducing material volume and adherence to DFM/DFA principles.

- Develop technical documents and handbooks

- Provide technical advice to the team as required

- Provide technical assistance during acceptance at clients’ site

Job Requirements:

- Degree in Mechanical Engineering or equivalent

- Strong fundamental knowledge in mechanical design

- Able to work Independently under minimum supervision and exhibit proactiveness in learning

- Hands-on experience in drafting CAD drawing using design software such as Solidworks, AutoCAD or Autodesk Fusion 360 preferred

- Good knowledge in heat transfer and fluid dynamics

- Knowledge in product design and design methodologies including human factors in design

- Basic understanding of different production technologies such as sheet metal, milling and casting, moulding and 3D printing.

- Analytical thinking and problem-solving capability

- Good interpersonal, management and decision-making skills

Job Description:

- Responsible for developing, implementing, and maintaining Quality Assurance Plan for production of products.

Benchmark, develop and implement inspection methods and procedures to meet quality objective.

- Collaborate with cross-functional teams to integrate quality considerations into the entire project lifecycle.

- Participate in product testing during design and development cycle and support in product/process qualification.

- Interpret and analyze mechanical drawings with attention to details.

- Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.

- Facilitate meetings for Material Review Board (MRB) disposition.

- Support in internal and external audits.

- Execute in accordance with the Company’s Quality Management System (QMS) requirements.

- Stay current with industry best practices, tools, equipment testing in system and quality assurance.

- Any other duties as assigned by Supervisor.

Job Requirements:

- Degree in Mechanical Engineering or a related field.

- Effective communication skills, both written and verbal, with the ability to convey complex technical information to diverse stakeholders.

- Ability to work collaboratively in a multidisciplinary team environment.

- Strong interest in quality assurance, project coordination, and the munition industry.

- Proactive and detail-oriented mindset with a commitment to maintain high standards of quality.

- Demonstrated leadership abilities in coordinating cross-functional teams to achieve quality objectives.

- Possesses strong time management skills, excels under pressure, and demonstrates the capability to multitask efficiently within demanding timeframes.

- Ability to write technical reports.

- Flexibility and adaptability to take on new challenges and responsibilities.

- Ability to read and interpret mechanical drawings with knowledge of measuring equipment.

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

· Knowledge in Midas Civil, Oasys, ASBD and Sofistik will be an advantage.

Bridge:

- Experienced in the design of bridges and viaducts.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description:

- Perform repair, maintenance, overhaul, service, replace, remove and installation task (Technical & Mechanical)

- Perform lubricant replacing, greasing and flushing for system (Hydraulic)

- Perform wiring replacing, tracking and diagnostic (Electrical)

Machinery usage involved overhead crane, buffering machine, hydraulic press, drilling machine etc. special technical equipment.

- Working at height (climbing up and down of vehicles)

- Maintain 5S/ housekeeping (Include, sweeping, clearing, and throwing rubbish, washing of parts & vehicles)

- Weekly updating of Vehicle Status in term of readiness and outstanding issue

- Ensure and Update operation Availability of vehicles are upheld and maintain above require

- Conducting of+C668 toolbox, safety and visitor briefings or presentation.

- Handling and coordinating with internal department request and customers’ needs

- Inspect and prepare quotation for Authority approval

- Arrange technician for daily drawing and returning of vehicle keys and logbooks

- Support Warranty issues if require

- Manage vehicle statuses/ flow, spare indentment status/ provisioning and resource planning

Job Requirements:

- Degree in Engineering (Mechanical/ Electrical/ Hydraulic/ Automotive/ Electrical & electronics/ Mechatronics) or Diploma in above engineering and has 5 years working experience of relevant industrial

- Good team player

SERVICE ENGINEER

Background

Framo Singapore Pte Ltd was established in 1982 and is a subsidiary branch office of Framo AS which is a Norwegian based company and market leader in the manufacture of high-tech pumping systems for the chemical/product tanker market and oil & gas industry. Framo AS is a part of the Alfa Laval concern.

Framo Singapore Pte Ltd deals with the aftersales service, commissioning, repairs and inspections of these pumping systems as well as customer follow up and support.

Working place will be at our premises in Tuas.

Duties

- Perform inspections and testing of Framo pumping systems on board vessels.

- Carry out troubleshooting and repairs on Framo systems, both electrical and mechanical.

- Assist with repairs & overhauls of various types of Framo equipment in our workshop.

- Participate in vessel dockings and commissioning work at shipyard.

- Perform work at offshore installations as required.

- Prepare professional reports from attended jobs.

Qualifications

- Knowledge in PLC based control systems and/or Hydraulic systems.

- Automation or instrumentation experience an advantage.

- Diploma or Nitec in Mechanical/ electrical/marine engineering or similar.

- Good command of English both verbally and written.

Requirements

- Willing to travel overseas and work flexible hours on occasions.

- Can work both independently and as a team.

- National service (if applicable) to be completed.

- Physically fit.

We offer

- We can offer an exciting and challenging position in a solid, well-established company, working with good colleagues in a great working environment.

- A world leading and high standard products well known to the marked.

- Working with a high standard service organization.

- Competitive salary package.

- Internal training will be given.

Job Description:

The Position holder is responsible and functions as an Electrical Engineer with expertise in LabVIEW. As an Electrical Engineer, you will be responsible for designing, developing, and maintaining electrical systems and components, with a particular focus on LabVIEW-based applications. Your role will involve collaborating with cross-functional teams to ensure the successful implementation of projects and the efficient operation of electrical systems.

Successful Position holders are excellent communicators, enjoy solving problems, and work well in teams.

Roles and Responsibilities:

• Design and Development: Create electrical system designs, including circuitry, wiring diagrams, and component selection, with an emphasis on LabVIEW-based applications. Develop and optimize LabVIEW code for data acquisition, control systems, and test automation.
• LabVIEW Programming: Utilize your strong proficiency in LabVIEW to program and debug real-time and embedded systems. Develop custom LabVIEW interfaces and user interfaces for various engineering applications.
• Testing and Validation: Plan, execute, and document testing activities to validate the functionality and performance of electrical systems. Use LabVIEW to automate testing processes, collect data, and perform analysis.
• Troubleshooting and Maintenance: Investigate and resolve electrical system issues, including hardware and software problems. Provide technical support to diagnose and troubleshoot LabVIEW software and hardware-related issues.
• Collaboration: Collaborate with multidisciplinary teams, including mechanical engineers, software developers, and project managers, to ensure seamless integration and functionality of electrical systems. Participate in design reviews and provide input on system architecture and implementation.
• Documentation: Prepare clear and concise technical documentation, including specifications, user manuals, and test procedures. Maintain accurate records of design changes, test results, and project progress.
• Continuous Learning: Stay up-to-date with the latest advancements in LabVIEW and other relevant technologies. Continuously expand your knowledge and skills through self-learning and professional development opportunities.

Qualifications and Experience:

• Bachelor's or Master's degree in Electrical Engineering or a related field.
• Experience in electrical system design, development, and testing.
• Strong proficiency in LabVIEW programming, including experience with real-time and embedded systems.
• Solid understanding of electrical engineering principles, circuit design, and signal processing.
• Familiarity with hardware interfaces, such as DAQ (Data Acquisition) devices and sensors.
• Experience with testing and measurement equipment, such as calibrators, multimeters, vibrotesters, flowmeters etc.
• Attention to detail and the ability to work on multiple projects simultaneously.
• Knowledge of other programming languages (e.g., C/C++, Python) is a plus.
• Familiarity with industry standards and regulations related to electrical systems is desirable

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide. We offer field service repairs, inspections, overload load testing, dry-dock repair

supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Deck Machinery Service operations, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES
• etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Ship Electricians are welcome to apply.
• Min 5 years' experience in inspection, troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems.
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Sailing experience as Electrical Officer (E/O) on bulker vessels equipped with deck cranes will be an added advantage
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage

Roles and Responsibilities

• Understand contractual requirements with respect to reliability, inventory management, and service delivery and implement plans to meet the requirements.
• Be first point of customer contact for all mechanical seal needs and also provide out of hours service and support, where necessary.
• Be an interface between customer and JC organisation and coordinate with appropriate internal departments to deliver suitable outcomes for customer
• Be responsible for reliability data management, trending, analysis, and reporting. Prepare monthly and yearly reports for internal and external stakeholders.
• Conduct site tours, identify preventive activities and implement recommendations proactively to eliminate potential causes of seal failures.
• Manage Condition Based Maintenance program for customer, collect and analyse vibration data. Liaise with local and regional team for analysis and advanced diagnostics.
• Gain understanding of systematic and chronic failures and develop plan accordingly to eliminate root cause of failures. Perform root cause analysis, failure mode assessment, recommendations, and reporting.
• Maintain the equipment & seal database and failure history using John Crane Interface Reliability Management software for all equipment within the scope of the contract.
• Understand customer needs, review installations, make engineering proposals to optimise arrangements, quantify benefits, prepare and present proposals.
• Handle stock profile management, rationalization, and cost control, including vendor/3rd party management and coordination.
• Conduct internal and external training needs analysis, develop training plans, and Provide training to client and company personnel on various topics relating to operation, maintenance, selection and specification of rotating equipment and mechanical seals
• To be present during equipment overhaul and commissioning where applicable, providing detailed subsequent analysis, assessments, and recommendations.
• Other duties as assigned by Reliability Engineering Manager / Site leader

Please note that only shortlisted candidates will be contacted.

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Responsible for achieving product global regulatory compliance in areas of electromagnetic compatibility, product safety, wireless and telecom.
• Work with cross functional teams (Regulatory, R&D, CPE, Ops, external R&D/CPE/Ops Partner) and external agencies in delivering product regulations that meet the ever-changing world-wide regulatory standards.
• Engage in product regulatory certification application & renewal for both NPI & CPE, encompassing Safety, Electromagnetic Compatibility (EMC), Telecom, Product Stewardship & Cybersecurity, as to consistently meet product compliance.
• Participate in Safety/EMC/Wireless/Telecom/Cybersecurity technical groups hosted under WTR (Worldwide Technical Regulations). Partners with external manufacturing partners cum 3rd-party test laboratories in delivering seamless regulatory goals & commitments.
• Partner with R&D, CPE & Ops in qualification activities - on design improvement, cost reduction, alternate sourcing, assurance of supply, factory line relocation & sustainability efforts, while optimizing qualification cost vs time-to-market delivery.
• Actively engaged with partners in design reviews to in-build a robust Safety compliance to our product design.
• Review LES Regulations processes & framework to uphold compliance to HP's Safe & Legal requirements.
• Assess & anticipate regulatory standards changes that have potential readiness impact to system/hardware design, factory build, shipment fulfilment, and to incorporate these expectations early into program & supply delivery chain.
• Ensure closure to country market surveillance, factory inspection audit & safety incident.
• Support digitization & automation, workflow process optimization within Regulations & HW Test.

• Minimum Bachelor's Degree in Electronics/Electrical/ Electromechanical Engineering, or equivalent.

• Minimum 3 years of Electrical and Electronic Engineering or any relevant engineering experience
• Strong in analytical and problem-solving skills.
• Good knowledge in Data Analytics (Excel VBA, Power BI, SQL database management), with good data visualization skill.
• Good knowledge in worldwide product safety/Electromagnetic Compatibility (EMC)/Telecom regulatory requirements.
• Good communication and excellent inter-personal skills.
• Possesses strong teamwork and ability to collaborate with cross functional teams.

• Perform pre-delivery inspection on equipment prior for delivery.
• Provide preventive maintenance service and remedial repair services.
• Maintain customers install base records.
• Maintain good working relationship with customers.
• Ensure the committed services are delivered and meet customers’ expectations and needs.
• Liaise with contractors for installation works.
• Review and troubleshoot electrical and automation problems.
• Develop software programming, site testing & commissioning for PLC, HMI, SCADA and VFD, Soft starter, Power Meter
• Ready to learn new products & Technology.
• Provide on-site tech support for PLC/HMI/SCADA/VFD/Soft starter/Power Meter, Guidance to product installation, troubleshooting of our products.
• Willing to provide hands-on pre & post sales technical solutions to support sales team.
• Review engineering specifications, drawings, and work instructions, for fulfillment of customer requirements

Job Requirements

• Minimum Nitec/Diploma in Mechanical Engineering, Electrical Engineering or Mechatronics Engineering or its equivalent
• Experience in PLC and HMI Programs for machine controls
• Fresh Graduate are welcome
• Able to work as a team
• Provide technical supports in a professional manner.
• Experience in Industrial Automation Products troubleshooting and commissioning like VFD/Soft starter/Power Meter/Breakers etc will be added advantage

Position Overview:

The Maintenance & Facility Engineer plays a crucial role in ensuring the efficient operation of equipment and machinery within the manufacturing plant. This position involves a combination of technical expertise, problem-solving skills, and strong attention to detail to ensure that production processes run smoothly and any disruptions are minimized. The Maintenance Engineer is responsible for performing preventive maintenance, troubleshooting equipment issues, coordinating repairs, and continuously improving maintenance processes.

Job Duties & Responsibilities:

• Perform regular inspections, preventive maintenance, and repairs on production equipment, machinery and facilities to ensure optimal performance and minimize downtime.
• Collaborate with production teams to schedule maintenance activities in a way that minimally impacts production schedules.
• Identify, diagnose and troubleshoot equipment malfunctions or breakdowns promptly to minimize production interruptions.
• Installation and qualification of equipment and parts.
• Manage tools, equipment, and storage for maintenance control.
• Source & procure spare parts, fixtures, fittings or component ensuring that they are compatible with existing equipment and meet quality standards.
• Maintain accurate records of maintenance activities, including equipment maintenance schedules, repairs performed, and parts used.
• Assist ISO audit, perform internal and external audits and compile detailed reports of findings.
• Undertake ad-hoc facility minor repairs.

Qualification and Requirements:

• Bachelor's degree or Diploma in Mechanical or Electrical Engineering.
• Min 5 year related field or equivalent experience with hand -on technical skills in maintenance, repair of machinery.
• Knowledge with ISO & OHSAS procedure, renewal and audit.
• Excellent problem analysis and problem resolution skills.
• Strong inter-personal and communication skills for collaboration with cross-functional teams.
• Excellent written and verbal communication skills in both Mandarin and English to liaise with Mandarin and English-speaking counterparts in the course of work.
• Attention to detail and a commitment to maintaining high-quality standards.
• Ability to work effectively under pressure.

Responsibilities:

· Participate in design, development, testing and implementation of applications

· Support daily operations and end user requirements

· Maintain and improve current systems and operations

· Prepare system documentation and training materials

· New technology exploration and if adopted, to execute its implementation

Requirements:

· Degree / Diploma in IT/ Computer studies or related

· Min 1-2 years of experience in VB.Net

· Knowledge in SQL database

· Exposure to any ERP software will be an added advantage

· Knowledge of ReactJS is an advantage

· Able to multi-task and work under tight schedules

· Good team player with excellent communication skills

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities:

• Protocol generation or review for the assigned areas (i.e. process equipment, facilities, utilities, and laboratory equipment)
• Review vendor or construction turnover document
• Participate/lead system walkdowns to assure compliance with design.
• Support or direct execution of full Commissioning and Qualifying project lifecycle, including URS,
• Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with cross functional teams.
• Support or lead summary report writing
• Support the review and revision of design document.
• Support the handover of assigned system.
• Support the management of project schedule.
• Compliant to quality and safety requirements.

Qualifications:

• Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 3 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices. • Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail.
• Proficient presentation and facilitation skill is a plus.

EA License No : 19C9587

Responsibilities:

· Participate in design, development, testing and implementation of applications

· Support daily operations and end user requirements

· Maintain and improve current systems and operations

· Prepare system documentation and training materials

· New technology exploration and if adopted, to execute its implementation

Requirements:

· Degree / Diploma in IT/ Computer studies or related

· Min 1-2 years of experience in Front-End Development primarily ReactJS.

· Knowledge in SQL database

· Knowledge in versioning tools (GIT, SVN)

· Knowledge of Back-End Development Framework such as ASP.Net Core is an added advantage.

· Completed 1 or more projects in any role using either Agile or Waterfall methodology

· Exposure to any ERP software will be an added advantage

· Able to multi-task and work under tight schedules

· Good team player with excellent communication skills

-To supervise hull machinery and mechanical equipment, packages, installation and testing activities ensuring Contractor’s works are performed according to project specifications, schedule and respecting all the relevant QA standards and HSEQ procedures.

- Compliance of hull machinery works to project specifications and schedule

- Hull Machinery/Mechanical equipment/Packages installation and testing activities: progress information accuracy and updating

- Work progress certification

- Supervising worksites activities

- Dealing with contractors to assure fabrication, installation and testing completion according to schedule and specifications

- Fabrication weekly and monthly reports preparation

- Work progress certification

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Job Description:

Be part of a team designing, developing and delivering software products for airport/warehouse/production logistics solution.

Roles and Responsibilities:

· Design and develop various software applications/modules for baggage/material handling solution.

· Develop interface with PLC and other external systems.

· Develop documentation such as function specification, detailed design specification, test plan.

· Perform onsite testing and commissioning.

· Conduct user training and system operation support if required.

Requirements:

· Degree/Diploma in computer science, computer engineering, information technology or related discipline.

· Proficient in programming with Java/Python/C#/Java Script.

· Experience in SQL and Microsoft SQL Server.

· Minimum 1-2 years software development experience.

· Good analytical and problem-solving skills.

· Able to work independently as well as within a team.

· Travelling to oversea for project deployment is required.

· Experience in web application development is a plus.

· Experience in Windows system administration is a plus.

· Experience in IT network administration is a plus.

· Fresh graduates are welcome to apply.

With business expansion, we're looking to hire a Singapore based Service Technical Officer to provide service to regional key accounts.

For this role, you will need to

■ Commission, calibrate and maintain the performance of the sensors;

■ Provide effective solutions to customers' concerns.

■ Communicate with clients’ engineers and other technicians to ensure that

services are delivered effectively.

■ Promptly following up on service requests and providing customer feedback.

■ Prepare presentations and conduct training to the customers to keep up to date with

the latest developments of the sensors;

■ Write reports and present findings to the Manager after each service visit.

Job requirement

■ Diploma in any field (engineering related major is preferred)

■ At least 2 years of technical service experience within engineering space,

candidates with engineering background are welcome to apply.

■ Team player and independent, good communication skills.

Job Description:

- Integrate and install auto-mechanical/ electrical/ electronic sub-components/robot/equipment according to process instructions

- Carry out calibration/acceptance test on sub-systems/robot/vehicle/equipment according to process instructions

- Perform functional checks, setting, testing, fault finding and failure analysis

- Service and troubleshoot of Auto-mechanical / Electronics / Electrical control system

- Perform troubleshooting and fault analysis on Hydraulic/Pneumatic/ Electronics/ Electrical system

Job Requirements:

- Diploma in Mechatronics/ Electronics/ Electrical/ Robotics & Smart Systems or related discipline

- Basic understanding of electrical/electronic circuit

- Experience in establishing machine comms interface like RS/CAN/ Modbus/ TCP-IP will be an added advantage

- Able to perform analytical and diagnostics with measuring equipment like Digital Meter & Scope

Job Responsibilities:

• Source and identify suppliers for direct/indirect materials/services to expand supplier base and for new project/production needs;
• Obtain quotes from newly source suppliers to provide costing and cost reduction;
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/service;
• Develop and negotiate favorably supply agreement with suppliers;
• Work with Engineering/Unit Sales to analysis Sales Contract’s scope of supply and provided Sales Contract BOM Cost to Management;
• Support in providing Project Costing;
• Other ad-hoc duties as assigned.

Requirements:

• Diploma or Degree in Mechanical Engineer/HVAC in or equivalent;
• Proficiency in both written and spoken in English and Mandarin as to liaise with relevant Mandarin speaking counterparts;
• Excellent organization problem solving and negotiation skills.

(Key Roles)

1 Customer & field return complaints handling & resolution.

Drive for timely identification of root cause and corrective actions plans. Monitor track the effectiveness of corrective action implemented. Internalize and deploy warranty field failure DPPM metrics with alignment to key process improvement including manufacturing, test and development processes

2 Drive subcontractors together with Quality members to build quality into the products through

a) Audits

b) Ensuring system and processes are in placed including but not limited to establishment of critical processes.

c) Deploy effective quality methods and tools across subcon processes

3 Perform evaluations & tests to assess and mitigate risk on Quality issues

4 Participate in new project reviews during development stages and assess product risk

5 Any other Adhoc projects as assigned

(Secondary Roles)

1. Monitor performance of new product quality during development and initial mass production stage

2 Assess new product risk before mass production and readiness of product

3 Review Critical Parts list and Quality plan

4 Conduct periodic team meetings both internal and or subcontractors to align with QA process and address issues with QA tools quality issues & corrective action closure.

5 Set & monitor factories KPIs through quality performance, quality management

6 Conduct system and process audits

7 Work with Subcon to ensure their key suppliers are in compliance of supplied materials