Job Description

• Provide full support to the Project Management Team.
• Be responsible for the planning and coordination of the project with internal and external customers.
• Monitor, track, and provide timely project progress reports to the management.
• Ensure smooth processing and execution of related task through proper and timely coordination with internal and external parties, suppliers and the authority.
• On-site audit whenever required.
• Perform other tasks and responsibilities assigned.

Requirements

• Preferably experiences in Project Planning and Coordination
• Proficient in AutoCAD will be advantageous.
• Meticulous, good interpersonal and communications skills
• Has sense of urgency and able to produce quality work within tight timelines
• Highly adaptable and receptive to changes, with high level of independence and initiative.
• Good personality with good integrity and a strong sense of responsibility
• Preferably able to start work immediately or at short notice.

Job Responsibilities:

1. Assist Director in control production activities, material flow and inventory to achieve cost, quality and delivery targets.

2. Monitor and ensure timely delivery of project within scheduled time frame.

3. Resolve and keep track of project time schedule and process issues with relevant department.

4. Ensure manufacturing operation is running according to safety and quality system.

5. Manage use of equipment and maintenance of plant and machineries to ensure smooth operation and always keep track of quality issues to achieve zero defect.

6. Prompt reporting to management on production activities, periodical performance review on production output, quality and productivity.

7. Develop processes to measure and further workshop productivity (equipment performance, team efficiency etc.)

Job Requirements:

1. Minimum Qualification: Bachelor Degree in Engineering (Civil/ Production/ Mechanical).

2. Minimum Experience: 5 - 6 years’ experience in heavy engineering related to Steel industry.

3. Able to work independently

4. Good Knowledge of construction standard operating procedure

5. Knowledge in Civil & Structural design and analysis

Job Desprictions:

1. Review final documentations and submit to customer in customer portal

2. Arrange Notification of Inspection, liaise with Third Party Inspector and follow up accordingly.

3. Able to use Non-conformance register, process concession request, Technical Queries. Drawing clarifications, Root Cause Analysis, Preventive/Corrective action and follow up accordingly.

4. Review customer quality plans, insertion test plans, drawing requirements and ensure these requirements

are incorporated into work orders.

5. Able to read technical drawings, material specification and other customer’s requirements.

6. Able to Lead/assist in External/Internal Audit and customer audit

7.Compiling Raw Material Inspection/Certificate report.

8. Maintain QMS documents.

9. Monitor all measuring equipment for calibration due date and to coordinate outsourced calibration.

10. Must follow instruction given by Manager

Requirements:

• Minimum Diploma in Mechanical Engineering or relevant engineering discipline
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry
• Able to interpret drawings and technical documents
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• Able to work independently and contribute to the team excellence

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our team within Chemtech division in Sulzer Singapore Ltd as Senior Applications and Sales Engineer to help us take our business to the next level.

In this role you will be accountable for:

• Prepare technical proposals and commercial tenders project
• Interface with customers and monitor progress of projects
• Co-ordinate projects with head office, regional offices and agents
• Prepare and co-ordinate all proposal activities with Regional Offices and Local Headquarters
• Carry out tender reviews and order reviews
• Handle technical clarification for all proposals. Work as an integral part (with technology, engineering, production) in developing proposals, pricing strategies and customer presentations
• Prepare price calculation and tender documentation
• Ensure that the specifications offered to the customer are within the capability and capacity of the company
• Ensure that the customers’ requirements are adequately conveyed and reflected in engineering, manufacturing and installation
• Follow-up projects monthly and update MIS daily
• Undertake sales and marketing of Sulzer Chemtech products and services throughout Asia Pacific region
• Control all correspondences and documentation relating to project. Co- ordinate and utilize inter-department resources where necessary.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer at order stage.
• Prepare complete project and engineering files
• Arrange project handover meeting with Project Management and Engineering for larger projects and non-standard
• Initiate Customer Complaint Reports to ensure that with complaints are properly and efficiently dealt with
• Feedback information to customers on quality improvements on product and changes, as and when necessary
• Supervise/Check the work of junior Applications & Sales Engineer if required.

To succeed in this role, you will need:

• Degree in Chemical Engineering
• 5 ~ 10 years of sales and customer services experience preferably in Chemical & Petrochemical / Oil & Gas industry.
• ProII / Aspen Simulation Program is optional, but not mandatory
• Microsoft Skills
• Distillation theory
• Fair knowledge of chemical separation processes knowledge Business travel (~30%), particularly in the Asia Pacific region.

Your benefits:

• Annual Leave
• Medical Benefits
• Variable Bonus
• Flexi Working Hours
• Long Service Award

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

Role purpose:

To revise procedures and systems and providing oversight during the QA process.

To ensure that the team is correctly utilizing QA methodologies and systems and also take corrective actions when they identify issues on the team.

To support manufacturing and production activities, he reports recurring quality issues to production managers and other personnel. This helps ensure that manufacturing errors and production issues don’t negatively impact delivery timelines or cause delays within the manufacturing process.

Key Responsibilities:

1)Responsible for checking all incoming materials and all fabricated outgoing materials.

2)Criteria based on Mill Certificate dimension. Send to store when materials meet criteria. To reject, return for an exchange if criteria not met.

3)Check all drawings before submission to Production.

4)Prepare Non Conformance Report (NCR) if required.

5)Submit QA reports for all Projects.

Job Specific Technical/Professional Qualifications/Requirements:

1)Bachelor Degree in Engineering or relevant field.

2)Proven experience of 1-2 years.

3)Attentive to details to ensure that products are manufactured, installed or are operating to the required specifications.

4)Interpersonal and leadership skills.

• Leading root cause analysis & corrective action in non-conformance investigation

• Establishing quality inspection plans, COC, procedures / work instructions / API testing

• Responsible for performing gap analysis on standards revision and revise procedure / work instructions

• Attend to customer/ supplier / internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent

• Min 1 year of working experience in Oil & Gas / Metal Machining Industry

• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

• Able to work 5.5 workdays

1. Design and manufacturing of Mooring Winch, Towing Winch, Anchor Handling Winch, Linear Winch, Anchor Windlass, Marine Crane systems, anchor pipe system, post trenching equipment and other related marine equipment.

2. Carry out calculation work on T.C Marine and Offshore Equipment.

3. Conduct checks on the required marine classification standards for T.C Marine and Offshore Equipment.

4. Carry out the study and understanding of client’s technical specifications.

Working Location: Jurong Island

Working Days: Monday to Friday

Salary: $5,000 to $7,000 per month

Contract Duration: 2 years (with option to renew)

AWS: 1 month for every 12 months continuous service

Responsibilities:

• Support the delivery of standard, consistent and robust cost management frameworks, and procedures.
• Assist with the roll-out of the company standard tools and processes and apply them to turnaround events.
• Support the implementation of turnaround event Cost Breakdown Structures (CBS) in alignment with company and Downstream recommended practices, the estimate breakdown and Primavera (as applicable). Support the set up in SAP Blueprint (Upgrader) and GSAP (Refinery/Chemicals) with CBS and budget information accordingly.
• Specific activities may include work order creation and closure, Purchase Order (PO) status report generation (from GSAP, Blueprint (BP) and TRACK), BP/GSAP cost reporting generation, productivity reporting, support of Forecaster tool for cost forecasting, and the review, follow up and approval of Craft Team Member (CTM) time-writing.
• Support implementation of Cost Control processes consistent with Shell procedures for: commitment capture, VOWD (Value of Work Done), cost forecasting/phasing and earned value management. Establish cost report content and frequency, prepare, and conduct budget holder reviews, and publish reporting. Support Contracting & Procurement group by providing detailed cost and performance analysis.
• Monitor the work hour consumption and associated cost of contractor activities against contractual targets such that potential deviations are identified, and the appropriate corrective actions are taken. Connect with Field Leads, as needed, to validate physical progress and productivity. Act as a focal point for the contractor offboarding plans and ensure changes are captured via the change management process.
• Deliver accurate and high-quality monthly Latest Estimate forecasts for turnaround events. Maintain and promote realism in the cost forecasts in the face of commercial pressure and optimism from turnaround teams.
• Assist in the maintenance of change/trend management and contingency management: ensure that appropriate changes/trends are reflected in the regular cost forecast updates. Prepare forecasts and review with budget holders. Establish linkage between change/trend management and contingency management, perform the contingency drawdown and ensure accurate current status is reflected in reports.
• Cost reporting: generation of accurate cost reports, including variances from the plan on commitment, VOWD, management of changes and against approved budget. Support preparation of cost reporting in Power Bi dashboard.
• Maintain consistency in cost basis through rigorous adherence to the controls processes.
• Participate and comply with all safety programs.
• Assist with the continuous improvement and implementation of standardized work processes for effective cost control.
• Stay current with mandatory training.
• Support Project Services Peers for implementation of TOOLs and System for Continuous Improvement Works and Initiatives.

Requirements:

• Bachelor’s Degree/Diploma of any Engineering discipline.
• At least 5 years of relevant experience as a cost engineer with strong exposure to costing and project management in oil and gas or petrochemical industry.
• Ability to build effective working relationships across various department, with various contractors on site. Strong stakeholder management.
• Strong verbal communication skills.
• Strong computer skills.
• Meticulous and detailed.

Summary

The incumbent is responsible for retrieve and review all customer specification documents, vendor quotes, drawings and diagrams for creating electrical designs for customer.

Responsibilities

• Prepare and submit drawings for customer’s review and approval.
• Amend drawing & revise the drawing as per command from production manager or relevant party to meet customer’s requirements.
• Responsible for design control and drawing specification control, liaise with customer for engineering design.
• Prepare bills of quantities according to project requirement for production manager easy to refer.
• Prepare quotation to customer and follow up with customer to make sure we meet customer’s requirements.
• Perform daily review and approval of products release (QA) to check the quality of products.
• Ensure all quality management system documentation are kept in order as per our ISO standards.
• Implement quality control programs as per our ISO standards.
• Electrical product includes, IP standard control panel or enclosure
• Any other task assign included but not limited to assisting in ISO 9001:2025 & BizSafe 3.

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards &contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client &regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in precast work planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Role and Responsibilities :

- Proper planning and managing of projects from start to completion.

- To be able to identify site problems and render proper technical solutions accordingly to clients.

- To attend site meetings and site issues.

- To execute projects effectively and make sure projects meet completion date within the contract period.

- To be able to effectively work and coordinate with our fabrication team to meet clients' requirements and deadlines.

To ensure 100% clients' satisfaction on timely deliveries and quality control

Requirements :

• Bachelor’s Degree in Construction or Civil Engineering or any related field.

• He/She must possess minimum 2 years of project management experiences in construction industry.

• He/She should be able to handle site issues & communicate effectively with different department within the organization.

• He/She should have good time management skills & able to work independently.

• He/She should be able to handle time line and work under pressure.

• He/She should be a team player, self reliant, self motivated with single minded focus on priorities and deliverable results.

• Comfortable with learning new technologies and willing to go the extra mile when required.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our team within Chemtech division in Sulzer Singapore Ltd as Senior Applications and Sales Engineer to help us take our business to the next level.

In this role you will be accountable for:

• Prepare technical proposals and commercial tenders project
• Interface with customers and monitor progress of projects
• Co-ordinate projects with head office, regional offices and agents
• Prepare and co-ordinate all proposal activities with Regional Offices and Local Headquarters
• Carry out tender reviews and order reviews
• Handle technical clarification for all proposals. Work as an integral part (with technology, engineering, production) in developing proposals, pricing strategies and customer presentations
• Prepare price calculation and tender documentation
• Ensure that the specifications offered to the customer are within the capability and capacity of the company
• Ensure that the customers’ requirements are adequately conveyed and reflected in engineering, manufacturing and installation
• Follow-up projects monthly and update MIS daily
• Undertake sales and marketing of Sulzer Chemtech products and services throughout Asia Pacific region
• Control all correspondences and documentation relating to project. Co- ordinate and utilize inter-department resources where necessary.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer at order stage.
• Prepare complete project and engineering files
• Arrange project handover meeting with Project Management and Engineering for larger projects and non-standard
• Initiate Customer Complaint Reports to ensure that with complaints are properly and efficiently dealt with
• Feedback information to customers on quality improvements on product and changes, as and when necessary
• Supervise/Check the work of junior Applications & Sales Engineer if required.

To succeed in this role, you will need:

• Degree in Chemical Engineering
• 5 ~ 10 years of sales and customer services experience preferably in Chemical & Petrochemical / Oil & Gas industry.
• ProII / Aspen Simulation Program is optional, but not mandatory
• Microsoft Skills
• Distillation theory
• Fair knowledge of chemical separation processes knowledge Business travel (~30%), particularly in the Asia Pacific region.

Your benefits:

• Annual Leave
• Medical Benefits
• Variable Bonus
• Flexi Working Hours
• Long Service Award

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry, we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our Process Plant team within Chemtech division in Singapore as Senior / Process Engineer (Commissioning) to help us take Chemtech to the next level.

Purpose of the Job:

• Technical support to Sales and Project Managers; including meetings, presentations and technical discussions with customers.
• Represent ST and CTSG interests in all aspects of the contract or project (including the interests of other Business Units or CT units).
• Maintain good relations and contact with customer, and all relevant supplier, inter-CT company, CT Business Unit and/or functional department.
• Prepare technical documentation required within the company.
• Provide technical support (and training where required) to other APAC offices (STCN), if needed.
• Taking responsibilities for own work, and assist others in their work, to ensure successful completion of project.
• Act quickly on queries from others, work to schedule and specification or contract requirement and ensure on-time delivery of tasks assigned.
• Deputize for Process Engineering Manager, if required.
• Propose / initiate development topics and internal projects, where required.
• Propose and plan improvements to work processes and department operations.
• Guide, supervise, train and/or be mentor to employees, when required.
• Drive to be an expert in specific applications, technologies or process design aspects.

Main tasks and responsibilities:

• Prepare technical proposal and assist in commercial tender.
• Carry out tender reviews and order reviews
• Ensure that the specification or scope offered to the customer are within the capability, competence and capacity of the company.
• Be fully aware of contract scope and requirements, in so far, they affect process or other technical issues.
• Prepare technical calculations and documents; including (but not limited to) process simulation; PFD and mass balance; PID; selection, sizing and design of equipment; control philosophy and associated documentation; instrument selection and process data; plant operating instructions; functional description, lists, and others as may be required for Basic Engineering or a complete skid plant.
• Cross-check/review other engineers' process designs.
• Maintain and document design basis, design changes; signed design, check and review documents
• Prepare/maintain document list of process design documents, if need.
• Ensure that the project or customer process requirements are adequately conveyed and reflected in engineering design and installation.
• Review vendor/supplier documents for suitability and compliance to process requirements; make clarifications with vendors/suppliers if needed
• Prepare process guarantees documents, perform technical risk analysis and propose possible mitigation of such risks.
• Carry out plant start-up, commissioning, and plant trouble-shooting, including data collection, analysis and reporting, fulfilling guarantee test-runs and obtaining plant acceptance from customer. Start-up will comprise complete unit operations (not limited to around a column), membrane units, LLE units, as well as other PT technologies.
• Acquire knowledge of Sulzer unit operation products (mass transfer components, LLE, Evaporator, Separator), and technology required for continuous operation and growth of the company.
• Establish technical competence and expertise in certain applications or technologies; propose/plan own training where necessary, including non-technical fields.
• Ensure environmental friendly process design.
• Reporting to superior, or project manager, on workload, man-hour usage, project status.
• Review / check documentation prepared by employees in department.
• Establish / maintain process design procedures, guidelines, standards, templates for use by the department.
• Provide on-the-job guidance to employees for process design related issues, including attending meetings with them; including employees in other countries.
• Monitor project execution by new employees through all steps and periods of the project, from handover till start-up of plant.
• Review work processes and propose improvements.
• Plan and propose own training, in both technical or job-related skills, as well as in own managerial, supervisory or administrative skills.

Personal Strengths:

• A very strong customer service attitude and good negotiation skills.
• Analytical and problem-solving skills, for developing and implementing solutions to problems with assigned projects.
• Ability to interpret customer requirements and to design separations equipment and processes.
• Good foundation in process engineering as well as chemical separation.
• Strong communication and interpersonal skills.
• Strong interest in Separation Technology
• Can work well with Others in a Team

To succeed in this role, you will need:

• Degree in Chemical/Mechanical Engineering
• Min 5 years working experiences in Petrochemical and Chemical Field preferred.
• ProII / Aspen Simulation Program
• Microsoft Skills
• Distillation theory

Your benefits:

• Annual Leave
• Medical Benefits
• Variable Bonus
• Flexi Working Hours
• Long Service Award

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2022 in Switzerland. So come and join our story, starting today!

Job Overview:

We are actively seeking an experienced and visionary Test Architect with a strong background in designing and implementing advanced automated testing solutions using TypeScript and Python. As a Test Architect, you will be a key driver in shaping and optimizing our overall testing strategy. Collaborating closely with the development team, you will leverage your expertise to design innovative testing frameworks and mentor team members, contributing to the evolution of our testing methodologies.

Responsibilities:

• Architect and design complex and scalable automated testing frameworks using TypeScript and Python.
• Collaborate with the development team to define and implement testing strategies that ensure a high level of software quality.
• Lead the identification and resolution of complex defects, providing technical insights and solutions to maintain software integrity.
• Document and communicate test architecture and strategies to stakeholders, ensuring a comprehensive understanding of the testing approach.
• Work collaboratively with Test Engineers, Developers, and other cross-functional teams and cross-region teams to enhance testing processes and methodologies continually.
• Provide mentorship and technical leadership, sharing knowledge and best practices in automated testing and test architecture.
• Contribute to the development and execution of comprehensive test strategies, ensuring thorough coverage of all functional and non-functional requirements.

Requirements:

• Bachelor or Master's degree in Computer Science or a related field.
• 8+ years of experience in software testing, with a focus on automation testing and test architecture.
• In-depth knowledge and expertise in designing and implementing advanced automated testing solutions.
• Extensive experience with TypeScript and Python for test architecture and automation.
• Proven ability to lead and coordinate testing efforts, mentor team members, and collaborate effectively with cross-functional teams.
• Excellent problem-solving and analytical skills.
• Ability to work independently and collaboratively in a cross-region environment.
• Fluent written and verbal communication skills in English. Chinese language skills are a plus.

Dear All

One of our Electrical contractor looking for an electrical engineer with min 5 years of experience.

Singapore experiencie is compulsary

Job description:

• Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.
• Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.
• Preparing specifications for purchases of electrical equipment and materials.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Working with a variety of technicians.

Interested candidates send us your resume

Regards

Sekar/Director/Licensee

Good Luck Employment Agency Pte Ltd

Singapore

License?06C3188/ Regn.R107951

Job Description:

1. Builds business by identifying and selling prospects; maintaining relationships with clients.

2. Identifies business opportunities by identifying prospects and evaluating their position in the industry; researching and analyzing sales options.

3. Sells products by establishing contact and developing relationships with prospects; recommending solutions.

4. Maintains relationships with clients by providing support, information, and guidance; researching and recommending new opportunities; recommending profit and service improvements.

5. Identifies product improvements or new products by remaining current on industry trends, market activities, and competitors.

6. Prepares reports by collecting, analyzing, and summarizing information.

Requirements:

Minimum GCE O’Level

1-2 years of experience, preferably in the build environment

Demonstrated key client’s contacts

Ethical and can be trusted with confidential information.

Ability to take an overall view and possess critical thinking abilities.

Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous
• Entry level are welcomed to apply, training provided
• Singaporeans only

Responsibilities

• Research and develop air conditioning system/product for industrial and commercial use
• Design and optimization of mechanical components for HVAC systems
• Analysis of mechanical systems, including structural, fatigue, thermal and vibration
• Develop manufacturing drawings in accordance with applicable standards
• Construct and build developed systems
• Collaborate and interact with external vendors for component selection, manufacturing and system assembly
• Read, interpret and review technical drawings, schematics, and computer-generated reports
• Generate operating procedures and provide technical information
• Collaborate and analyze customer design proposals, specifications and requirement, and to evaluate and propose solutions

Requirements

• Bachelor's Degree in mechanical Engineering or equivalent engineering degrees
• Diploma with good experience in mechanical design and system assembly will also be considered
• Good mechanical aptitude and knowledge
• Proficient in SolidWorks and modeling
• Excellent problem solving and project management skills
• Background in HVAC engineering especially chiller operation and optimisation is a plus
• Experience in R&D and product development especially in air conditioning system is a plus
• Knowledge in new product introduction from R&D to commercial stage
• Technically sound coupled with experience in sourcing, negotiation and cost control
• Possess initiatives, logical thinking and good analytical abilities, and able to resolve issues from multiple perspectives.
• Passion for the job and a challenging spirit preferred.
• Strong communications and interpersonals

Key Roles and Responsibilities:

• Managing day to day project activities including scheduling, coordinating and monitoring and reporting update of projects.
• Monitoring and ensure compliance to applicable scope of work, codes, practices, QA/QC policies, performance standards and specifications.
• Execute projects, ensuring they are completed on time and within budget and identify potential issues or risks.
• Co-ordination with Operations & Maintenance (O&M), technical / engineering resources / contractors / authorities for execution of the project.
• Review of feasibility studies and cost estimates on proposed projects.
• Technical review on design concept, engineering and operational matters on the project and related activities.
• Assist in development, scoping and establishing project budget, schedule and control measures.
• Prepare and maintain project documentation, including progress reports, budgets, and schedules.
• Primary focal point between various parties.
• Provide any other support.

Qualifications & Experiences:

• Diploma/Degree in engineering or related field.
• Fresh graduate is welcome to apply and for those with 5 to 10 years’ or more experience in Solar PV system design / engineering will be considered for senior position
• Must have high level of integrity, able to generate trust and build alliances with co-workers.
• Able to communicate effectively & diversely for prompt resolution to site matters.
• Able to work independently, take initiative and ability to foresee and resolve issues before surfacing would be an added advantage.
• Thorough understanding of SS638 and working knowledge of common construction materials and methods.
• Proficiency in Microsoft Office, Autocad and construction software.
• Knowledge of engineering principles and practices.
• Previous experience in electrical works in construction is an added advantage
• Ability to work cross functionally in a fast-paced environment, communicate concisely to all levels of the organization, and maintain effectiveness while working autonomously or collaboratively.
• Ability to multi-task and manage deliverables for multiple projects at a time
• Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures.
• Ability to maintain good project documentation and is familiar with ISO documentation requirements.

Preferred Skills & Characteristics:

• Proactive, positive and self-motivated with ability to work without close supervision
• Strong interpersonal and leadership skills
• Demostrated oral and written communication skills
• Very detail oriented and well organized
• Not afraid of heights, medically fit and able to climb vertical ladders.
• Safety certifications such as Managing Work at Height, Building Construction Supervisors Safety Course etc. preferred.

We regret that only shortlisted applicants will be notified

The job requires

-know how to run a bioreactor upon training

-support and troubleshoot on the use of bioreactor

-organizer and conduct short training, 1 hr on various topics related to upstream bioprocessing.

-working hours 8.30am to 12.30pm daily.

-office location, Tradehub 21

-working around the area of Buona Vista and Jurong.

About Us:

Mero Asia Pacific Pte Ltd is a German multi-national company that specializes in design & construction of building envelopes. With over 30 years of expertise in providing a wide range of construction elements that made iconic structures such as The Jewel - Changi Airport and Esplanade.

Building a Better Place for You

Adopting the Tripartite Standards is part of our commitment towards building a better workplace for you. You will continue to be treated fairly and with respect, and we will do our best to support you to achieve your full potential.

Qualification and Skills:

Bachelor's / post-graduate Degree in Civil / Structural Engineering or equivalent from a recognised institution

At least 5 -7 years of practical experience in the execution of construction projects in Singapore after attaining the qualifications

Exposure to engineering design in façade industry

Familiar with structural FEM Analysis program in singapore as well as British standards.

Familiar with softwares i.e. Autocad, STAAD Pro. or STRAND

Essential Job Functions:

Conceptualization and design of aluminium structure, glass, cladding, steel structure and other façade materials

Prepare Engineering Calculation and Analysis based on the required code by using STAAD Pro and AutoCad software

Prepare and check design drawings

Ensure that the engineering submissions and revisions are delivered on time

Assist to provide technical input, support and solutions for all technical proposals and tenders

Liaise with clients, consultants and other subcontractors

Assist with structural analysis

Site inspections as and when required

Any other duties as assigned by the Engineering Manager / Technical Head

Please note that this position is only available to Singaporeans and PRs.

Interested candidates, please email your detailed resume to [email protected]

To design and build electrical control system drawings for winches, offshore equipment etc.
In charge of Class submission of drawings.
To attend to site commissioning overseas on board vessel.Able to use VISIO software or AUTOCAD software.
Able to read and understand electrical drawings.

To design and build electrical control system drawings for winches, offshore equipment etc. In charge of Class submission of drawings. To attend to site commissioning overseas on board vessel.Able to use VISIO software or AUTOCAD software. Able to read and understand electrical drawings.

Job Overview:

We are actively seeking a skilled C++ Developer to join our dynamic team in the role of Senior Software Engineer. As a key member of our development team, you will be responsible for designing, developing, testing, and optimizing high-quality software solutions in C++ for Windows environments. This position requires a strong foundation in C++ programming, expertise in COM/DCOM/ATL, and the ability to collaborate with cross-functional teams. Proficiency in English is essential for effective communication within our global team.

Responsibilities:

• Design, develop, and optimize high-quality software solutions in C++ for Windows environments.
• Debug and optimize existing code to enhance performance.
• Utilize expertise in COM/DCOM/ATL to design and implement efficient and scalable code.
• Collaborate with cross-functional teams to understand project requirements and deliver effective solutions.
• Contribute to projects involving .NET Framework, C#, WPF, or WinForm.

Requirements:

• Bachelor or Master degree in computer science, Software Engineering, or a related field.
• Min years of experience in software engineering, with a focus on C++ programming on Windows.
• Proficient in COM/DCOM/ATL.
• Experience with .NET Framework, C#, WPF, or WinForm is a plus.
• Excellent written and verbal communication skills in English.
• Chinese speaking, reading, and writing skills are preferred.
• Strong problem-solving and analytical skills.
• Ability to work independently and in a team-oriented environment.
• Self-motivated with a high potential for growth and learning.

Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous
• Entry level are welcomed to apply, training provided
• Singaporeans only

• Good hands-on experiences in Tunneling works for MRT Project.
• Site management which includes planning, supervising and coordinating projects.
• Managing all project operational and administration.
• Attending site progresses and meeting with client, Main contrator and others who involved in project.
• Review of design and construction methodology from construction perspective. Monitoring the progress of the project strictly following the permissible time parameter.
• Able to work independently and under pressure.
• Good team player with ability to lead & multi tasking
• Degree in Civil Engineering with at least 2 years relevant experience in the construction field, preferably in MRT/ Tunnel/ Cable Tunnel management.
• Experienced in Tunnel Construction