General Description

The incumbent is responsible to provide technical process support to the Production Shift teams and the Facility Owner of the process area in the LNG Terminal.

Roles and Responsbilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

• Provide technical support for routine and non-routine production activities and develop best practices to improve production safety, reliability and efficiency.
• Evaluate current production activities, make recommendations and execute continuous process improvements in the areas of safety initiatives, equipment reliability and operational excellence.
• Troubleshoot for process and equipment problems to ensure greater operational reliability and efficiency
• Measure plant performance including power consumption index, operating index relating to process availability, efficiency and reliability and other relevant field data surveys.
• Undertake energy efficiency and optimisation projects as required.
• Undertake alarm management for assigned area and proactively drive alarms to ensure robust operations.
• Undertake Management of Change (MOC) for terminal modifications and take on lead role for various MOC projects as required
• Support engineering design analysis including preliminary design development, (heat and mass) calculation, technology evaluation and equipment selection.
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, model reviews, Safety Integrity Level reviews, RAM analysis, layout and other process etc and support the design validation process in alignment with contract and regulatory requirements and specifications.
• Review standard operating procedures and start up manuals to ensure compatibility with design limitations and procedures are adequate.
• Lead, review and perform inspection and investigation of equipment and production systems to facilitate optimisation and formulate remedial procedures.
• Assist the Production Manager to report and investigate any related HSSE near miss / violation.
• Custodian of Operation Abnormality Reports, to manage the overall status of the reports, perform initial investigation to determine root cause and to drive root cause analysis and resolution.
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum of eight (8) years practical experience in process engineering function in an oil, gas or petrochemical industries.
• Conversant with local/international codes, regulations, standards, best practices in the process.
• Good knowledge of commissioning, operations and troubleshooting of a variety of large and complex processes in the oil, gas or petrochemical industry is critical.
• Knowledge of the LNG / natural gas or other hydrocarbon industries would be advantageous. Candidates with experience in cryogenic plant design, commissioning and start-up are preferred.
• Certified Energy Manager certification will be an advantage.
• Knowledge of Process Safety Management, Process Hazard Analysis and Functional Safety would be advantageous
• Knowledge of electrical, instrumentation, controls and mechanical discipline would be advantageous
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Self-motivated, independent and strong team player
3. Strong interpersonal, written and verbal communication skills
4. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties.

Education

Bachelor degree in Chemical Engineering

The successful candidate will join the IT Infrastructure team to manage, support and monitor the Azure Cloud Infrastructure and PKI, as well as acting as a business manager with internal customers to explain and collaborate on Azure platform capabilities. This expert will be relied on to articulate opinions on matters impacting server infrastructure and consider the impact on other areas in the company.

Key Responsibilities

Principally responsible for the end-to-end delivery of enterprise systems:-

• The main responsibility is to administer Microsoft Active Directory, the Public Key infrastructure (and other related components) in our Azure Cloud and On-Premise environments.

• Ensure the effectiveness and optimize the use of Azure resources and PKI use cases through quality assurance, lifecycle management, monitoring, and cost management strategies.

• Act as a primary point of contact for internal customers, understanding their business needs and translating them into effective cloud solutions.

• Collaborate with multidisciplinary teams to integrate Azure services with various business appli-cations and workflows on a global scale.

• Assurance of technical security aspects in the production environment.

• Planning and execution of monitoring for the production environment.

• Responsible for the preparation and distribution of regular reports to the respective stakeholders.

Key Requirements

• Proven experience in managing Azure cloud environments, including Azure Active Directory, Azure Virtual Machines, and Azure Networking.

• Technical knowledge and experience in the deploying, administering and management of com-plex or large IT infrastructure systems and services, specifically in Microsoft Azure (AD Direc-tory Services, ADFS, DHCP, DNS, etc) and Azure AD

• A team player, resourceful, independent and can handle tight project deadlines

• Possess good analytical and trouble-shooting skills in technical fault isolation and rectification.

• Excellent communication and interpersonal skills, with the ability to articulate technical concepts to non-technical stakeholders.

This is a global role that offers a unique opportunity to combine your coding expertise with a critical understanding of compliance and regulatory requirements..

The SOFTWARE ENGINEER is tasked with the responsibility to evaluate the safety and performance of software in medical devices and Software as a medical device as well as ensure that manufacturers comply with specific regulations, standards and legal requirements.

You will be the bridge that ensures coding excellence meets the highest industry standards to shape the future of our world’s innovative solutions.

Key Responsibilities:

• Safeguard the next generation of new medical products from software-related risks that can potentially harm patients and users.
• Be the fore-front expert in code quality and development best practices.
• Conducting thorough reviews of code for quality, correctness, efficiency, and adherence to regulatory requirements and coding standards.
• Identify performance and safety issues, logical errors, potential security vulnerabilities, and deviations from coding standards.
• Provide constructive feedback to manufacturers on compliance issues and deviation from best practices.
• Ensure software development process aligns with established compliance frameworks and guidelines.
• Deep understanding of technical documentation requirements for software-enabled medical devices, including but not limited to software specifications, design and architecture documents, risk management files, and software validation plans.
• Evaluating risk management files for software-enabled medical devices, including risk analysis, risk evaluation, and risk control measures to ensure appropriate identification, assessment, and mitigation of risks throughout the product lifecycle.

Key Requirements:

• Bachelor’s or Master’s degree in computer science, Software Engineering, Biomedical Engineering, or a related field
• At least 2 years of experience in software development (this includes the time for master’s & PhD Thesis) with proficiency in programming languages. For example: Python, Java, C++, JavaScript, NodeJS.
• Preferably with 4 years exposure in the medical/ healthcare industry with knowledge on medical standards and regulations for example, ISO13485, EU Medical Device Regulation (MDR)
• Strong communication skills to communicate effectively with customers and internal teams, and articulate assessment findings clearly and professionally.
• Strong technical writing abilities to provide clear and concise feedback on the technical documentation and communicate assessment findings effectively.
• The ability to work independently and as part of a team and under pressure to meet deadlines and maintain confidentiality.

What you will do:

As Senior Sales Engineer, you will be responsible for smaller less technically complex solutions. Builds relationship with customers, which may be end users, to understand needs and offers solution within a standard framework or range on pricing and margin.

How you will do it:

• Study product knowledge and company working procedure, continuous to improve domain knowledge of product, company and industry.
• Plan annual secured order strategy aligned with Department goal. Achieve business sales target with YOY growth expectation in the region.
• Prepare and issue tenders and proposals to customers. Lead negotiation and/or bidding activity at optimum profit levels to the company. Close orders to achieve the goals and targets assigned. Responsible for payment collection.
• Provide monthly reporting on Commercial vertical secured and revenue attainment as well as non-financial reporting to management team.
• Be proactive to liaise, develop relationship and influence customer(s) to maintain a long-term service relationship, ensure customer satisfaction at high level.
• Develop sales leads and identify customer requirements.
• Monitor and collect competitors’ activities in market and report periodically directed by company.
• Independently develop and follow up BMS projects to provide solutions for customers.
• Compliance with Johnson Controls’ policies and procedures at all times.

Optional:

• Responsible for the promotion of BMS products and systems in design institutes, industry associations and integrators in the industry in the region. (For project/solution sales)
• Compiling the production of catalogues to customers. Prepare localized master catalogue and general applications for contractors and consultants where appropriate.
• Conduct cold calls and new business development. (For HK ELV)
• Explore and execute end to end BMS project, and providendustry solution to customer.

What we look for:

• Bachelor Degree or above, preferably in Mechanical engineering and HVAC engineering or Electrical / Electronic engineering
• Minimum 1-3 years working experience as sales/marketing position in direct selling industrial machineries
• Self-motivated, hardworking and positive
• Strong interpersonal, presentation and selling skills
• Good spoken and written in English
• Willing to travel frequently.

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Responsibilities

• Plan and monitor project progress to ensure timely delivery
• Liaise with contractors, consultant, design team, client etc
• Manage project resources availability to meet project needs e.g manpower, build components, equipment
• Monitor and control project cost
• Conduct risk assessment for projects
• Arrange O&M work as required

Job Requirements

• Good knowledge of solar power system design
• Good communication and interpersonal skills which is essential for project work
• Self- motivated, hardworking, enthusiastic
• Willing to put in overtime when necessary to meet project datelines
• Experience in solar PV installation
• Diploma/Degree in Solar/ Renewable/Electrical engineering or related field
• Proficient in PVSyst/CAD/MS Office (Project/Word), PowerPoint, etc
• Familiar with fieldbus and other industrial communication protocol including Modbus, TCP/IP etc

Job Summary:

· Salary range: $3500 - $6000

· Working Days and Hours: 5 days - Monday to Friday, 8.00am - 5.15pm

· Location of work: Tuas Avenue

Job Responsibilities:

1. Involve in validation documentation for new machine/product/process/material

2. Initiate product reviews. Verifies and test products. Responsible for validation, trial run for new projects and customers.

3. Responsible for change control process and procedure development and implementation.

4. Responsible for new job development.

5. Provide technical support to customers.

6. Provide QA support to project development

7. Involved in new machine installation and process improvements.

8. Other related duties as assigned by the managing director/ QA manager

9. Location: Tuas with Company transport provided.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.\

Gan Chen Yun

Registration Number: R23116696

EA Licence No.: 06C2859

(MCI Career Services Pte Ltd)

Roles & Responsibilities

• Microservices development using Java/Spring/MariaDB.
• Coordinating with other teams as single point of contact
• Managing production releases with good preparation and low error rate.

Requirements

• 7 to 10 years experiences
• Java/Spring REST APIs
• MariaDB & SQL
• Good communication skills

Roles & Responsibilities

• Microservices dev with Java and spring boot; Kafka; MongoDB and MariaDB
• Operations on PCF, OCP, VPC, Jenkins, AWS
• Data engineering with Spark and Python
• Release management
• Excellent tech and business stakeholder management

Requirements

• 7 to 10 years experiences
• Microservices dev with Java and spring boot; Kafka; MongoDB and MariaDB
• Operations on PCF, OCP, VPC, Jenkins, AWS
• Data engineering with Spark and Python
• Release management
• Excellent tech and business stakeholder management

Job Summary:

· Salary range: $3500 - $6000

· Working Days and Hours: 5 days - Monday to Friday, 8.00am - 5.15pm

· Location of work: Tuas Avenue

Job Responsibilities:

1. Involve in validation documentation for new machine/product/process/material

2. Initiate product reviews. Verifies and test products. Responsible for validation, trial run for new projects and customers.

3. Responsible for change control process and procedure development and implementation.

4. Responsible for new job development.

5. Provide technical support to customers.

6. Provide QA support to project development

7. Involved in new machine installation and process improvements.

8. Other related duties as assigned by the managing director/ QA manager

9. Location: Tuas with Company transport provided.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Eugene Eiap Yeow Hong

Registration Number: R23112438

EA License No: 06C2859 (MCI Career Services Pte Ltd)

• Optimize machine usage with WIP loading plan.
• Plan job flow, hours estimation and schedule process timeline using TTPS and OPS to procedure.
• Arrange outsource process requisition as per team’s decision to assist resolve bottleneck issues.
• Design drawings and job folder issuance.
• Monitor job progress & feedback timely to person-in-charge.
• Calculate internal cost estimates to justify for sub-out.
• Plan and ensure raw material, mold base and standard component requisitions are as per schedule.
• Purchase toolroom accessories and negotiate prices and prepare Purchase Requisitions.
• Monitor quality and feedback timely to person-in-charge.
• Involve in Continuous Improvement Programme.
• Update tooling status on daily basis.
• Prepare weekly machine downtime report to General Manager.
• Reject outsource request from operation if capacity does not allow or has not been agreed upon or MRR is not produced.
• Outsource if internal capacity is deemed overloaded.
• Re-prioritize job schedule according to superior’s request as per customer’s requirement.
• Reject raw materials, mold bases and standard components that do not meet requirements.

Requirements:

• Diploma or Degree in Mechanical Engineering
• Mold design & fabrication processes, molding processes, project management.
• Mold making processes with basic machining knowledge.
• Able to interpret 2D drawings.
• Independent with good initiative and able to multitask in a fast-paced environment.

Roles and Responsibilities:

• Diagnose and troubleshoot compressors received at the workshop, as preliminary stage before execution of the service.
• Service, overhaul and test all compressor technologies in the company's portfolio, from reciprocating to screw compressors.
• Effectively communicate verbally and in writing with co-workers and when necessary, with customers.
• Recommend preventive measures and provide prompt and effective resolution to technical problems
• Duly maintain proper record for each service job, such filling service, inspection and test reports
• Follow up work orders for each job, maintaining checklist and daily time sheets.
• Work effectively in coordination with other departments in order to ensure a smooth and timely supply of required parts to complete service activities.
• Guarantee proper maintenance of workshop tools and equipment
• Conduct safety assessments of the working environment and to proactively propose improvement to enhance the efficiency of the operations
• Provide technical training for customers and technicians in the team.
• commissioning or commissioning assistance services, inclusive of verification of electrical panel, refrigerant charge adjustment, data recording and analysis
• Troubleshoot and identify potential failures of system and analyze compressor failure through operation data.
• Lift and shift to support customer in removal and reinstallation of compressors on the refrigeration systems

Requirements:

• Minimum of 5 years HVAC field service experience
• Knowledge in air-conditioning, chiller or HVAC systems
• Electrical and basic electronic background is required, must be independently able to troubleshoot and identify electrical control and power line failures.
• Diploma/Degree in Mechanical / Electrical Engineering or equivalent
• Able to work under pressure and in a fast-paced environment.
• Good in planning, organizing, interpersonal skills and able to work independently.
• IT Savvy, proficient in MS Excel and MS Word

Added Advantages:

• Brazing or welding certification
• Safety certifications
• Possess class 3 driving license

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Job Responsibilities:

• Responsible to provide Electrical & Instrument (E&I) support to maintenance and operations of the plant
• Maintenance strategy planning and implementation
• Predictive and preventive maintenance (PPM) planning
• Lead failure root cause analysis, analyze asset availability and drive improvement in E&I reliability
• Risk management which includes PPM strategy, equipment/parts obsolescence, spare optimization.

Job Requirements:

• Bachelors or Masters degree in Electrical & Instrumentation Engineering
• Candidate with 1 to 2 years of experience in a chemical industry/manufacturing environment will be an added advantage.

Reporting to the Lead Engineer, Design & Engineering, you shall be an integral member of Design team in providing project support on the design, construction and commissioning of specialised aluminium high-speed workboats.

Selected candidates will have the opportunity to work with cross functional teams from design conceptualisation, project execution to delivery.

Key Responsibilities:

• Performing ship’s basic and detailed design and integration.
• Developing shipyard standards and assisting in preparing vessel’s technical specifications.
• Follow through on assigned projects from design review to production completion.
• Evaluating vendor’s proposals to ensure the scopes of service/supply and lead time meet project requirements.
• Working with QA/QC to define acceptance criteria for inspection, test and trials to ensure that vessels meet Owners' standards and specifications.
• Attending test and trials, and assisting in data evaluation, fault finding and failures analysis.

Basic Requirements:

• Candidates must have at least three to five years’ experience in a similar capacity in the marine and offshore industry, and tertiary qualification in Naval Architecture or a related field. possess at least a NITEC or Higher NITEC or Diploma in Naval Architecture.
• Candidates with more years of proven track record will be offered the role of Senior Engineer
• Good working knowledge of class rules and international regulations.
• Specialised knowledge in an engineering field (eg Mechanical or Electrical) is advantageous.
• A team player who is able to work independently with vendors, Class and owner representatives to achieve timely design approval.
• Good communication skills, confident in spoken and written English.
• Proficient in relevant Microsoft Office programs including MS Project, AutoCad and ShipConstructor.
• Working knowledge of design and 3D ship modelling software will be a plus point.

Others:

• 5.5 days work week
• Two-way company transport provided to and from Boon Lay / Lakeside

Your remuneration will commensurate with your experience and qualification.

Your career advancement will depend on your attitude and contributions.

KEEP CALM AND JOIN US!

Interested applicants please forward your detailed resume to

Penguin International Limited

21 Tuas Road

Singapore 638489

Only shortlisted candidates will be notified.

Thank you for your interest.

What you will do:

As Service Sales Engineer IR, you will be part of Industrial Refrigeration Service team to handle sales and technical inquiries from customers by providing front end technical, commercial, and administrative support which will be assisted by the operations team in Singapore.

• Service business performance growth through pro-actively selling (existing and new initiatives)
• Sales Revenue, GM and AR overdue
• Maintain existing customer base and develop new customer base to ensure continuous business growth.
• Customer relationships building and customer satisfaction
• Prepare and follow through of quotation
• Update of installed base, SFDC and Service Max opportunities
• Ensure JCI’s ethics, policies and procedures are followed

How You Will Do It:

• Proactive selling of Labour and Material (L&M), Retrofits, Parts, Preventive Service Agreements (PSA) and new initiatives through schedule and/or drop in visits
• Recommend solutions to customer requirements which will have company’s competitive advantage
• Understand pricing, quotation, technical proposal, clarification & negotiation with factory/vendors during quotation preparation, and budgeting
• Review received order against quotation, comments on T&C’s and book in/hand over of orders.
• Represent the company to customers with professional appearance, maintain consistent communication with customers as well as establish the long-term relationship with them
• Maintain field intelligence and feedback pertinent information on competitor’s activities, product, prices, business performance and develop the necessary business strategies to ensure the company excels.
• Execution of business operation and conduct are to conform to JC Singapore policies.
• Communicate and work closely with other departments in ensuring the overall company objectives/performance is achieved at all times.
• Perform any other duties from time to time, whether ad-hoc or otherwise, as assigned by your superior.

What We Look For:

• Engineering Degree onwards or equivalent (Mechanical, Electrical, Chemical or Process)
• 3 years and above experience in Chemical, Petrochemical, F&B, HVAC/Refrigeration or similar industries
• Good communication, analytical, organizing & relationship management skills
• Industrial & Process Refrigeration products, systems or maintenance knowledge
• Budgeting & forecasting
• Must be a proactive team player
• Good communication skill in English

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Responsibilities

Assist Senior Production Engineers in managing a production team that includes:

• Resources are used efficiently.
• Co-ordinating between other teams like Planning, Quality Control and other departments
• Ensure all the works to be carried out in a safe manner with proper methods, tools etc.
• Ensure production and safety SOP are being followed correctly.
• Meet customer’s requirements that include:
• Delivery Schedules
• Documentation
• Quality
• Safety

Requirements

1. Bachelor degree/Post Graduate Diploma in Civil & Structural Engineering from recognised University.

2. Ability to work independently.

3. Ability to adhere to schedule and keep proper records.

4. Strong teamwork spirit, proactive & good communication skills.

Roles & Responsibilities:

• Verify customers’ RFQs
• Design, conceptualize and calculate complex customer-specific solutions for explosion protected areas
• Create techno-commercial quotations, technical customer documentation and drawings
• Support Sales in close cooperation with the corresponding interface areas including but not limited to production, engineering and quality
• Execute, support and monitor orders till shipment including coordination with manufacturing facilities, 3rdparty suppliers and service providers
• Interact with clients and engineering contacts to provide technical, engineering and design support and advice

Experience & Qualifications

• Bachelor of Engineering degree in electrical engineering
• Minimum of five years’ experience with proven records
• Remote I/O with various communication protocol such as Profibus, Modbus & Ethernet IP
• Human Machine Interface (HMI) with Windows OS for Serial and EtherNet communication

Skills and Abilities

• Knowledge about Ex-atmospheres, type of protections, zone classifications, equipment groups
• Knowledge in SAP
• Excellent communication skills, both verbal and written in English. German would be an added advantage.
• Customer focused attitude & teamwork (Responsiveness, Accurate & Customer Friendly)
• Proficiency in office management software (MS Office, MS Project, others)
• Independent and result-oriented
• Ability to work under pressure
• Quick learner and adaptable
• Able to travel occasionally

Broad Functions:

The primary responsibility of ESH Engineer and Assistant Engineer is to Assist ESH Section Manager in ESH related activities and programme to ensure legal compliance with Environmental, Safety & Health Requirements and conformance to Safety and Health Management System

1. Job Description / Responsibilities:

1.1. Month-end, quarterly and year-end closing functions

1.1.1. Request Quotation
1.1.2. Check Product Specifications meet Operational Needs
1.1.3. Request service / delivery schedule
1.1.4. Liaise with suppliers for solution to issues faced.
1.1.5. Communication with process owner for feedback1

1.2. Data Collection for ESH Related activities

1.2.1. Communication with process owners for data collection related to ESH.
1.2.2. Data analysis and interpretation
1.2.3. Collect feedback from stakeholders.
1.2.4. Work with stakeholders for improvement to identified issues.

1.3. Promotion of In-house Safety Culture and Awareness

1.3.1. Routine Inspection of Workplace
1.3.2. Education and awareness training
1.3.3. Involvement in Risk assessment, HAZOP, EAI, PPE assessment review.
1.3.4. Conduct ESH-Related Programmes to promote safety culture.
1.3.5. Communication to all staff on ESH-Related cases for awareness and case-study learning
1.3.6. Conduct safety induction course for new staff
1.3.7. Conduct PSSR (QESH inspection) for new equipment and process
1.3.8. Assist in Monthly ESH Team Meeting
1.3.9. Promote workplace Improvement suggestion by stakeholders.

1.4. Compliance to Legal and Other Requirements\

1.4.1. Arrangement for 3rd party testing (Industrial Hygiene Monitoring, Stack Emission Monitoring, etc)
1.4.2. Internal ESH Awareness Training
1.4.3. Arrangement for 3rd party Training (Forklift Refresher, Respirator Fit Testing, CERT, Confined Space, First Aider, etc)
1.4.4. Provide advice and improve Legal Compliance awareness for related stakeholders.
1.4.5. Assist in SHMS audit (document preparation, verification, etc)
1.4.6. Assist in Legal Register documentation.
1.4.7. Communication of changes to Legal Requirement and recommend follow up actions required.
1.4.8. Assist in document submission to Authority.

1.5. Contractor Management

1.5.1. Review documents submission by Contractors and Vendors
1.5.2. Conduct Safety Induction Course for Contractors and Vendors
1.5.3. On-site Assessment of work done by contractor and vendor
1.5.4. Ensure PTW compliance.
1.5.5. Management of Contractor and their activity to ensure safe work practices and safe working environment.
1.5.6. Communication with Stakeholders for proper planning to assign laydown area and resting area for contractors.
1.5.7. Ensure 5S on Workplace Monitoring.

1.6. Process Safety Improvement

1.6.1. Understanding of Process Outline and Process Flow
1.6.2. Identify areas with pain points.
1.6.3. Communication with Process Owners on areas for improvement
1.6.4. Understanding on the workings of new Technology and how it can be applied to current existing process.
1.6.5. Design Review with stakeholders for Management of Change (PCA)
1.6.6. Review of Standard Operation Procedures with Process Owners to integrate Safe Work Practice as well as implementation of Lock Out Tag Out and Safe Shutdown Procedures.

1.7. Emergency Response

1.7.1. Assist SIC, SMC, FSM for On-site Emergency Preparedness activity.
1.7.2. Coordinate with General Admin section and Guardhouse Security to ensure site security.
1.7.3. Communicate with relevant Authority for emergency & security-related issues.
1.7.4. Verified Functionality and Availability of on-site emergency equipment and tools.
1.7.5. Assist in Emergency Response Plan revision if necessary.

2. Requirements:

2.1. Degree / Diploma related to Engineering / Chemistry / Environmental or equivalent.
2.2. Minimum 3 years Relevant working experience.
2.3. WSQ Specialist in WSH Level C
2.4. WSQ Manage Work at Height
2.5. WSQ Supervise Work in Confined Space
2.6. WSQ Assess Confined Space for Safe Entry and Work
2.7. WSQ Implement Incident Management Process
2.8. WSQ Develop a Risk Management Implementation Plan
2.9. Fluent in Microsoft Office – good understanding on applying functions, formula, tools.
2.10. Understanding of ISO and Management System elements
2.11. Good understanding of Singapore Legal Requirement
2.12. Understanding of MHI implementation and assessment
2.13. Process Safety knowledge and understanding
2.14. Bilingual
2.15. Pro-active and willing to learn.
2.16. Good Communication skills, able to practice empathy to better understand and resolve complex issues.
2.17. Work as a team harmoniously as well as independently without supervision
2.18. Plan and schedule work in orderly manner and work with deadline
2.19. Being an exemplary to lead and guide others to adopt and follow Safe Work Practices
2.20. Have interest in Process Safety understanding and application.
2.21. Able to interpret meaningful connection for data analysis.

3. Others:

3.1. Location: Jurong Island (Company Transport provided)
3.2. Commence work: ASAP.
3.3. Applicants can work in Singapore without requiring a work pass.
3.4. Working Hours: Mon ~ Fri from 8:00 am - 4:45 pm

Job Description

• Provide security and admin support to the department
• Monitoring company drivers’ live location through our dedicated system
• Preparing and processing documentation, arranging requests, answering calls and handling basic paperwork
• Any ad-hoc duties as assigned

Requirements

• Minimum secondary education
• Basic computer skills
• Reliable, strong work ethics and positive working attitude
• Prior work experience in the security industry is preferred

Be a part of our diverse family at Hai Leck, embracing each other as you discover your unique career potential and find your perfect fit with us. We are committed to unlocking your potential and guiding you to success. Our employees are valued down to their skills, and we are committed to training them and expanding their knowledge.

We would be pleased to welcome you at our family in Hai Leck if you are a suitable member.

Email us at [email protected] now!

Main Job Function: Responsibilities:

• Planing of Aftersales services and customer coordination
• Assisting at Installation, commissioning, repair and preventive maintenance of Compressed Air systems
• Conduct on-site training to customers.
• Service Report Management,
• Spare Parts Ordering & Processing for jobs and stock
• Organizing goods for projects and coordinating Deliveries when required
• Prepare quotations for service jobs and follow up.
• Warranty handling

Pre-requisites:

· Advance Diploma in Mechatronic/Mechanical/Electrical Engineering

· Able to work independently with good analytical, communication and interpersonal skills.

· Willing to travel in Asia region for After-Market Support and training when required

· Team player who is self-motivated

· Knowledge on Screw & Piston compressors preferred Both Oil Lubricated and Oilfree

· Class 3 driving license with car would be added advantage.

· Able to speak and write good English

· Able to speak in Chinese (Mandarin) will be of advantage

· Knowledge of using computer for communication and use in controller repairs

· Technical knowledge with related to Air compressors/machinery & parts

· Over 2 years work experience in similar work environment would be an added advantage

Interested applicant, please email in with a detailed resume with photograph and stating expected salary to:

Nalin Amunugama

General Manager BOGE Asia Pacific

Email: [email protected]

Job Description

• Leading a team to support the business with technical and operations performance expertise and project management capability.
• Collaborate actively on the development and execution of the business unit growth by providing technical expertise and undertake due diligence of targeted processes and sites.
• Optimize and improve the performance of current activities, work on problem resolution, resolve conflicting priorities and meet assignment deadlines within a collaborative environment.
• Collaborate with Corporate T&P to ensure local alignment on global directives.
• Drive and prioritize activity according to the business needs to ensure on schedule completion.
• Continue to develop the technical community within the business unit to ensure that technical and performance standards and KPI's are uniformly applied across the business unit and enable knowledge exchange and employee's development.
• For implementation, provide the overall direction and management of assigned personnel, equipment, subcontractors, applying proper and effective project management procedures and skills.
• Ensure the project or assignment is planned and coordinated according to the required schedule, with strict adherence to health and safety, quality and budget considerations.
• Assist Business Development in preparation of estimates and procedures in planning of projects, financial estimates with a strong focus on operational efficiencies.
• Ensure technical quality and optimal health and safety in all aspects of job performance and compliance per all applicable local regulations and standards and Veolia corporate and Veolia South East Asia’s standards and best practices.
• Actively participate in feedback and post-job evaluation.

Job Requirements

• Engineering degree
• 15+ years post qualification experience, technical or operations
• Relevant experience within Asia and construction implementation knowledge will be an advantage
• Availability to travel within SEA essential

1. Quality Assurance

2. Communication And Leadership Roles

3. Health And Safety

4. Construction Site Responsibilities

5. Technical Roles

Responsibilities for overseeing and managing construction projects, ensuring that they are completed on time, within budget, and to the required quality standards, managing and supervising contractors and workers on site, ensuring that work is completed to the required quality standards, communicating with stakeholders, including clients, architects, and contractors

The role in the team may be any of health and safety, organisation of the site and those in it, supervision of materials on site, for the site work as well as people using these materials to accomplish different tasks on site. A Site engineer also ensures security is maintained on site.

Job Responsibilities:

• Team up with chemists to lead a team of lab analysts and technician in executing daily laboratory operations, ensuring compliance with accreditation standards and quality system implementation.
• Identify and drive initiatives to enhance laboratory operational efficiency and productivity.
• Manage laboratory inventory and equipment, including consumables/spare-parts inventory, equipment calibration, troubleshooting, and maintenance planning, to meet quality and operational requirements consistently.
• Play a key role in product management of specialty materials for semiconductor wafer fabrication and related industries.
• Provide support in new product development processes (R&D), analytical metrology, and quality assurance for all products.
• Collaborate with other departments on continuous improvement projects to achieve business objectives.
• Foster and maintain strong customer relationships, offering product expertise, providing technical support for new product developments and addressing technical emergencies.
• Cultivate and strengthen relationships with external parties, including research collaboration partners and material suppliers, for existing and new product development.
• Perform Quality Control (QC) responsibilities, including conducting quality tests, inspections, and analyses to ensure product integrity and compliance with standards and specifications.
• Investigate deviations, out-of-specification results, and quality-related issues, and implement corrective and preventive actions (CAPAs) as necessary.
• Develop and validate analytical methods for the testing of chemical compounds, ensuring accuracy, precision, and reliability.
• Maintain and calibrate laboratory instruments and equipment, ensuring they are in proper working condition for accurate testing and analysis.

Job Requirements:

• PhD or minimum Master's Degree in Chemistry or a related field.
• Working experience or significant exposure to specialty chemicals or semiconductor wafer fab supplier environments is considered an added advantage.
• Strong hands-on instrumentation experience such as ICP/MS, GC/MS, UV-Vis, GC/FID/TCD, IC, HPLC, GFAA, ICP/OES, NMR, and other measurement tools.
• Excellent written and spoken communication skills.
• Hardworking, able to multi-task, and willing to work long hours.
• Excellent presentation skills.
• Team player with excellent interpersonal skills and a strong sense of ownership.
• Ability to work under pressure, prioritize workload, be systematic, and make sound decisions in a fast-paced environment.
• Willingness to travel when required.

Required Key Skills

• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Provide Level-2 technical support and troubleshooting to resolve issues
• CCNP certification
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers

Priority Tasks

• Workplace is at customer premises and staff has to follow instituted Workplace securities
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching
• Perform configuration change activities
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem
• Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer/IBM
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Maintain the inventory of certificates and install/update/renew certificates as and when required.
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per IBM security policies and standards.
• Maintain/Update IBM inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per IBM service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Required Key Skills

• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Provide Level-2 technical support and troubleshooting to resolve issues
• CCNP certification
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers

Priority Tasks

• Workplace is at customer premises and staff has to follow instituted Workplace securities
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching
• Perform configuration change activities
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer/IBM premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem
• Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer/IBM
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Maintain the inventory of certificates and install/update/renew certificates as and when required.
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per IBM security policies and standards.
• Maintain/Update IBM inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per IBM service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Job Responsibilities

• Provide 24 X 7 technical assistance via phone,
• Troubleshoot CPE issues, Mobile Broadband, Web/Mail Hosting/setup, co-location and other ISP related products and services
• Coordinate with other departments and handle internal escalations
• Attend to faults and escalate if necessary. Common faults are outages, server failure, router, switch etc.
• Manage monitoring systems (eg. bandwidth monitoring, link monitoring, DDOS notification etc)
• Provide after-hours technical assistance to Data Centre (eg. handle customer visits, reboot server, DDOS issues, etc)
• Coordinate with other departments for basic troubleshooting support
• Ensuring alert for major project is being follow up closely and ensure that relevant department is being updated of the progress
• Ability to adapt quickly to ever changing priorities and handle multiple tasks simultaneously

Job Requirements:

• Degree/Diploma or equivalent with NOC experience
• Minimum 2 years of experience in a support/service environment with a keen interest in Internet Technology
• Preferably with CCNA certification or other network certifications
• Customer oriented, motivated and driven to explore new ways of doing things
• Team worker with good interpersonal, communication and writing skills
• Able to work within constraints and meet service levels
• Willing to accept new challenges and responsibilities
• Highly motivated with initiative
• Willing to work on rotating shift, inclusive of weekends and public holidays
• Customer focused attitude with ability to explain technical information to non-technical people with compassion
• Outstanding communication skills in English, both written and verbal