Job Description:

Arrival / Departure / Towing / Ground Support Equipment

• To perform Aircraft Docking Guidance System (ADGS) and manual marshalling of aircraft
• To perform inspection of bays and ensure no Foreign Object Debris (FOD)
• To install / remove wheel chocks and grounding cables
• To connect / disconnect tow bar to the air tug
• To deliver ground support equipment including maintenance steps
• Any other duties as assigned by the supervisor

Requirements:

• Minimum NITEC in Engineering or equivalent with 1 years of working experience in Airline industries is preferred.
• Comfortable with 12 hours shift work arrangement
• Candidate with LTA Class 3/4/5 license will have added advantage

Job Description:

• Conduct Classroom documentation training
• Conduct OJT & assessment
• Develop Training Syllabus and Training Assessment
• Develop Training Plan and OJT Log

Requirements:

• Professional Certificate/NiTEC, Diploma
• Train the Trainer qualification will be an advantage
• 1 to 2 years of aviation experience
• Aircraft Technician with no prior trainer experience are welcome to apply

Job Description

• Inspect and repair passenger seats, galleys, and lavatories and maintain aircraft conditions
• Install cabin interior components into commercial aircraft, including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.
• Maintain luggage storage area in a neat and organized manner
• Maintain inventory items required for handling the cleaning activities
• Maintain the quality of the aircraft interiors on the operated fleet
• Maintain the interior and exterior cleaning standards on the operating fleet
• Perform other duties as assigned by your superior

Job Requirements

• Minimum 'O' Level / Nitec in engineering or equivalent.
• No working experience is needed
• Able to communicate effectively verbally in writing in standard English.
• Ability to perform tasks in high-noise areas and work at height
• Able to work rotating shifts, including weekends and public holidays.
• Candidate must attend a 6- to 9-month Cabin Trainee Technician course (including On the Job Training) with assessment. Only those who pass the assessment will be offered employment for the role.

Job Description

Key Responsibilities

Assists in planning the daily work schedule within assigned territory to ensure completion of Preventive Maintenance and remedial maintenance.

Uses escalation policies as required to keep management informed of down situations.

Verifies and approves the operational quality of system equipment. Performs daily, weekly, monthly, quarterly, biannual, and annual periodic maintenance on systems within established time frames. Also performs wet cleans as required. Instructs customers in the operation and maintenance of systems. Troubleshoots and corrects process variations on systems partially with assistance from senior engineers.

Assumes responsibility for complete customer satisfaction within assigned accounts. Assists in planning, communicating, and co-ordinating support plans with customer management.

Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied personnel. Uses training and experience to identify some process related system problems.

Serves as the Company liaison with the customer's front line management on administrative and technical matters for assigned projects. Assists in the preparation of and participates in customer meetings.

Develops and implements plans to increase productivity. Tracks equipment performance and plan uptime improvement. Has a working knowledge of Statistical Process Control. Utilises Quality Improvement Process methods and terminology.

Plans and executes support activities on a wide range of Applied Materials' systems. May need technical assistance in performance of daily responsibilities.

Functional Knowledge

• Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Business Expertise

• Has a good understanding of how the team integrates with others to achieve objectives

Leadership

• May provide informal guidance and support to more junior team members

Problem Solving

• Provides solutions to problems in situations that are atypical or infrequently occurring based on existing precedents or procedures

Impact

• Impacts the quality of own work and its contribution to the team

Interpersonal Skills

• Uses communication skills to regularly exchange information

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
• Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
• Define, coordinate, perform and generate engineering test reports with limited supervision
• Technically lead and/or executes engineering projects, including development of key suppliers
• Implements concepts for variety of complex product issues and electrical solutions of difficult scope
• Generates electrical product specifications and reviews engineering documentation
• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Interfaces with internal and external customers regarding complex electrical issues for specific projects
• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Educational Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Mechanical Engineering or related engineering field

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Hands-on experience in electrical schematic diagram, PCB/ Low voltage circuit design for power and control
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful
• Good communication and interpersonal skills

Work Location

• Science Park II

Job Description

Capabilities Development

*Lead the development and implementation of Group and partners OEMs’ (Original Equipment Manufacturers) new repair capabilities and report to the Industrialization Manager.

* Analyze technical data, gather market data, investment requirements to perform feasibility studies and Return on Investment.

* Perform self-assessments, engineering studies, build up justification file.

* Liaise with Quality for smooth airworthiness application for testing & repair capability integration.

*Liaise with the OEMs to clarify the requirements.

*Develop, source new equipment, consumables and chemicals and support investments linked to testing & repair policies.

* Drive the progress of the tasks, pilot projects’ milestones review with various stakeholders, report advancement, track investments and expenses, monitor contractors and suppliers, devise maintenance plans.

* Lead operations trainings and validation tests.

* Establish calibration requirements.

* Follow-up the testing & repair ramp-up with the workshops and support the Entry Into Service for new programs.

* Report to management. Flow down relevant and timely information.

Support & maintain new capabilities

* Coordinate with Product Support Engineer (PSE), and Operations personal to ensure optimal customer support.

* Assist the lead equipment maintenance when required.

* Implement systems or components modifications following notification of change related to CMM, Service Bulletins (SB) or Service Information Letters (SIL).

* Support workshop implementation of new requirements upon fleet upgrade and retrofit campaigns.

* Develop the Integrated Logistic Support at SEDSA levels.

* Help sourcing for material, suppliers, 3rd parties, alternatives.

* Review calibration requirements.

* Take a pro-active approach, initiate creative solutions to maintenance issues and assist the workshops in implementing best practices, Continuous Improvement, LEAN operations, cost

reductions and applying lessons-learned from previous or bench-marked experiences.

* Ensure that communication between all stakeholders, Head Quarter, OEMs, Workshops, Quality, Sales, Continuous Improvement, Supply Chain, Customers, Suppliers, is optimum.

* Ensure SEDSA contract terms & conditions are understood & satisfied. Pro-actively manage contractual issues with 3rd Parties and suppliers.

* Report to management. Flow down relevant and timely information.

Profile & Soft Skills

* Be rigorous and organized, able to handle multi-tasking and priorities.

* At ease to report and present progress through regular reviews with the management.

* Develop excellent relationships across multiple organizations & with all levels of workshops and other Company personnel.

* Safeguard interest of SAFRAN Electronics & Defense Services Asia (SEDSA) and partners OEMs.

Health, Safety & Environment

* Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

* Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

* Actively participate and contribute to 5S initiatives.

Continuous Improvement and Innovation

* Lead by example the Continuous Improvement and Innovation initiatives in the company.

* Implement innovations.

* Pilot Company Lean and Improvement projects. Review progress, deliverables and gains for key innovations.

* Be a driving force in the Participative Innovation, ONE SAFRAN and Green Belts Improvement

* Spearhead the QRQC, SQCDPI, 5S, Root Cause Analysis, ONE SAFRAN methodologies to be best in class.

* Perform any other duties as assigned.

Experience and Qualifications:

a) Degree in Mechanical/Electrical/Aeronautical Engineering

b) At least 3 years of Aviation Engineering experience, Technical Support Aircraft Maintenance and Repair Operations, in OEM or MRO environment

c) Proficient in product support and trouble shooting procedures

d) Hands-on experience on design and wiring of electronics test fixtures.

e) Experience in OEM technical support, or related MRO operations/engineering

f) Must be familiar with technical support environment, processes, and manuals used for aircraft maintenance. Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

g) Effective Project Management and interpersonal skills

h) Experience in calibration requirements and procedures

i) Proficient with Microsoft software applications

j) Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

k) Sound knowledge of quality systems such as ISO9000 and AS9110

l) Excellent attitude, good team player, motivated, driven, committed, reliable. Take ownership of the projects

m) Ability to multi task in a dynamic environment

n) Excellent communications skills. Well versed in written and spoken English

o) Able to think ahead, process data, make decisions and solve problems.

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

• Develop and execute complex projects that have a substantial mix of electrical, mechanical, physics, algorithms and software design; attend design reviews and provide input to meet market requirement specifications (MRS) and hardware/software specifications. Ensure designs meet market requirement specifications (MRS). Coordinate with project marketing and management to understand system requirements. Be able to chair architecture brainstorming meetings and drive the systems process to down select to a final architecture of a top-level system.
• Participate in the design, development, and testing of radio-frequency components for semiconductor equipment, which includes high-power generators (up to 6 kW or more), matching networks, filters, or other tuning elements, with frequencies ranging from 300 kHz to 60 MHz.
• Write detailed specifications that cover all aspects of subsystem modules including interfaces to the product by using systems analysis to create a diagram. Create concepts for complex architectural design approaches. Lead team evaluations of architectures to provide recommendation for best system solution approach.
• Ability to fabricate or modify RF components to change their performance or enable access for instrumentation.
• Ability to instrument, characterize and troubleshoot RF sub-systems within larger semiconductor tool environment.
• Problem identification and troubleshooting a wide range of difficult, complex engineering problems in field of technical expertise, including serviceability and manufacturability.
• Support System Integration during the assembly and final testing of new product designs.
• Interface with other groups to workout design, systems architecture development and integration issues.
• Define all equipment interfaces and systems architecture and ensure they are up to date and documented.
• Work with vendors to develop design requirements and ensure delivery of parts that meet specifications.

Education Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Physics or related engineering field with a 1-3 years of relevant RF experience

Functional Knowledge

• Understand principles and operation of network analyzers, oscilloscopes, power meters, directional couplers, and other radio-frequency test equipment
• Knowledge of circuit theory and ability to develop analytical models of RF components
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful

Work Location

• Science Park II

Job Details:

• Source tender/quotation opportunities and manage submission for clients
• Review tender documents/award letters and handle all the post-tender queries/correspondence
• Manage the filing for all the tender/quotation documents
• Maintain tender/quotation and extension of contract in tender tracking system
• Provide updates to clients/customers
• Perform accurate and prompt entry of fax orders, order hotline and other sources into the system
• Handle all inquiries/complaints/feedback from customer/clients
• Ensure compliance to ISO and ISMS procedures and processes

Duties and Responsibilities:

• Source/publish tender or quotation opportunities
• Manage the submission of tender or quotation
• Review/check tender documents & contract terms and conditions prior to submission
• Review/check letter of awards (LOAs) and contracts
• Maintain tender/quotation and contract extension in tender tracking system
• Handle post tender queries and correspondence
• Check purchase orders against tenders and quotations
• Ensure timely filing of all the tender/quotation documents
• Manage item code change
• Respond to all inquiries from customer and clients in a customer service orientated manner
• Provide admin support when necessary. E.g. Filing, data entry, retrieval of documents, or any other duties and tasks assigned
• Ensure strict adherence and compliance to ISO and ISMS procedures
• Any other tasks that may be assigned due to the exigencies of operational requirements

Job Requirements:

• Min diploma
• Experienced in Admin, Customer Service; Order and PO Entry preferred
• Good verbal, communication and interpersonal skills
• Careful and meticulous, attention to details
• Good follow up and time management skill
• Computer literate

Job Description & Requirements

- Assigned to Business Development Manager as their Sales Support

- Provide RFQ, source rate with airline and oversea agents

- Daily shipping co-ordination of AIR/SEA/Cross Border /3RD PARTY shipments

- To handle billing advise and recoveries

- Administrative support (filing, circulation, preparation/generate report and etc.)

- To undertake new projects/new assignment given from time to time

- To represent sales department in various taskforce/committee

- Other duties as assigned by the Department Manager

Job Requirement

• Good interpersonal and communication skills
• Strong ownership and sense of responsibility
• Ability to manage multiple tasks efficiently
• Excel skills will be an advantage

Benefits

• Good structured career progression
• Comprehensive training will be provided
• Monday – Friday (5 days standard Office hour)

Job Objectives

Design and develop both optoelectronics devices and integrated photonics sub-system platforms. Devices includes but not limited to SOA, gain chips, FP lasers, DFB lasers (CW and DML) and SLEDs. Photonics integrated platforms include but not limited to photonics integrated circuits, Silicon-based integrated platforms, standard/custom packaged modules, as well as optoelectronics sub-systems (i.e. includes both optical and electronics sub-modules) to meet design goals and requirements.

Duties and Responsibilities

• Perform simulation of optoelectronic devices (CrossLight, ALDS, Optiwave), optical ray tracing (Zemax, Optalix), thermal (Solidworks) and electrical (5Spice) properties of optoelectronics devices
• Analysis of optoelectronics device epi growth, participate in wafer fabrication process integration, mask design integration, device functionality and reliability performance characterization and test results.
• With reference to state-of-art competitors, simulated performance and data-mining internal test-results database, you will refine the design, fabrication specifications, and simulation model and parameters to optimize fit between design and measured outcomes.
• Report generation of design and simulation outcome with support of experimental data, where available
• Build up database of optoelectronics device design white papers, and management of all design documentation repository
• Responsible for leading/co-leading programs with several major global players in the development of photonic integration solutions to support the Silicon Photonics platform for datacom and sensing applications.

1. Development will be beyond simplex monolithic integration with regrowth for spot size converters and array devices, towards multiple functionality PICs incorporating active devices of lasers, modulators and detectors with passive devices of waveguides, polarizers, MMI splitters and optical filters.
2. Development of multiple functionality PICs designed to be compatible to Silicon Photonics to form a larger scale integrated System-on-a-Chip component.

• Lead and manage qualification and transfer of product to manufacturing upon development completion.
• All other reasonable duties, as assigned

Qualification Guidelines

Minimum Education

Masters (in semiconductor based light emitting optoelectronics preferred)

Minimum Experience

Minimum 10 years’ working experience with technical background in optoelectronics and wafer fab processes in optical laser component, photonics device system and sub-system

Proven working experience in optoelectronics design and development and program/project management in the photonics manufacturing industry

Can read mechanical drawing, and understand the schematic diagram.

Can use auto cad tool drawing the shop drawing.

Can coordinate with tunnel engineer and site supervisor settle the site works.

Can lead M&E team carry out the related works.

Can schedule the site works and arrange properly.

At least have 2 years experiences.

Willing to travel

Work at construction site.

have good communication and team work.

Job Description:

• Establish sales channels;
• Expand the customer base and maximize the market coverage;
• Promote and sell company’s range of fire protection products;
• Attend to sales enquiries and prepare sales quotation;
• Providing pre-sales technical assistance and product education;
• Assist in formulating business strategies and identify new business opportunities;
• Preparing and negotiating tender and contract terms and conditions to meet both client and company needs;
• Providing after-sales support services;
• Build & maintain good relationship with clients;
• Supporting marketing activities by attending trade shows, conferences and other marketing events;
• Making technical presentation and demonstrating how a product meets client’s needs.

Requirements:

• Diploma or Degree in Business Management or any related field
• Hardworking, proactive, self-motivated with good working attitude
• Aggressive and strong customer-oriented service mentality
• Possess strong communication and interpersonal skills
• At least have 3 years of working experience

Job Responsibilities:

• Plan and assign equipment operators for aircraft pushback/towing, water/toilet servicing and supply of GSE equipment.
• Liaise with IGO/Maintrol/CEG for aircraft towing and other utilities servicing activities.
• Liaise with Equipment Maintenance team on equipment requirements/shortages.
• Maintain regular walkie-talkie communication with the equipment operators to ensure punctual departure of flights and any other changes in assignment for any services.
• Attend to customers’ requests/complaints (where necessary).
• Update the duty supervisor on any delay.
• Carry out any other duties as assigned.

Job Requirements:

• Higher Nitec / Diploma in Aviation or Aircraft Mgt
• Candidates who are proficient in SAP and Microsoft Applications will have an advantage
• Must be able to perform shift works
• Work Location: Changi Airport

Job Responsibilities:

• Plan and assign equipmentoperators for aircraftpushback/towing, water/toilet servicingand supply of GSE equipment.
• Liaise with IGO/Maintrol/CEG for aircraft towingand other utilities servicing activities.
• Liaise with Equipment Maintenance team on equipmentrequirements/shortages.
• Maintain regularwalkie-talkie communication with the equipment operators to ensurepunctual departure of flights and any other changes in assignment for any services.
• Attend to customers’ requests/complaints (wherenecessary).
• Update the duty supervisor on any delay.
• Carry out any other duties as assigned.

Job Requirements:

• Higher Nitec / Diploma in Aviation or Aircraft Mgt with at least 2 years experience in the similar role in aviation industries.
• Candidates who are proficient in SAP and Microsoft Applications will have an advantage.
• Must be able to perform shift works

· Manage supplier quality performance.

· Manage suppliers to ensure the part supply to the factory meet the quality requirement.

· Manage supplier First-Article processes and part qualification.

· Ensure supplier quality records are updated promptly.

· Responsible for ensuring that Supplier Quality Issue is resolved.

· Conduct External audit to ensure conformance to specified requirement.

· Support Internal, 3rd Party & Customer System audits.

· Report Supplier Quality Performance for management reviews.

· Support product/process qualification when necessary.

Skills Desired:

· Vendor management experience is preferred.

· Good understanding of quality management system & tools

· Self-motivated and deadline oriented.

RESPONSIBILITIES:

• Generate layout drawings, procedures, and technical specifications.
• Draft comprehensive scope of work for all mechanical engineering tasks.
• Produce technical specifications, requisitions, and detailed drawings (including plans, elevations, and arrangements).
• Coordinate engineering designs and manage interface-related issues.
• Strategize, develop, and innovate new products in alignment with project requirements.
• Enhance existing product designs for optimal performance and efficiency.
• Offer technical expertise to bridge the gap between product design and manufacturing processes.
• Lead and oversee investigations into the form and function of design features.
• Develop and refine technical drawings of mechanical parts and assemblies to convey design intent and guide manufacturing processes.
• Create communication documents to effectively convey design details to clients or manufacturing partners.
• Establish and maintain design history files for documentation and reference purposes.
• Validate system and product capabilities by designing and conducting feasibility studies and testing methods.
• Innovate manufacturing processes by designing and adapting equipment for component fabrication, assembly, and installation.
• Ensure system and product quality through the design and implementation of testing methods; verify finished product and system capabilities; validate fabrication, assembly, and installation procedures.

REQUIREMENTS:

• Hold a Bachelor's Degree in Mechanical or Mechatronics or any related field in Engineering.
• Possess a minimum of 5 years of experience in Engineering and Product Design, specifically in pressure vessels.
• Proficient in SolidWorks with a strong understanding of AutoCAD 3D or equivalent software, as well as valve differential designs.
• Familiarity with NFPA and relevant international pipeline design Codes and Standards is essential.

Software Engineer

We are looking for a skilled Software Engineer with extensive experience in .NET C# programming, primarily in Blazor Technology. The ideal candidate will be responsible for delivering well-designed and configured software systems such as in web blazor applications and desktop applications (WPF, C#) that cater to our internal Engineering demand. He/She will also provide technical expertise to the Managers.

The candidate should have at least 2 years of .NET C# programming experience, strong skills in software design, a passion for .NET development and innovation and excellent communication skills.

Responsibilities:

You will be working with the Test Measurement Centre (TMC) team and the Test Development Engineer who will provide the data sources and locations of our devices data.
You will be designing, documenting, developing and delivering software products, specifically responsible for the following as appropriated by the TMC Team for the projects:
Developing .NET C# software modules including Blazor Server Apps,
Writing SQL Server queries, MongoDB transactions and stored procedures
Functional and Interface Specifications
Writing acceptance and deployment reports and executing them
Site Test Specification/Reports
Take a leading role in software documentation, development, configuration and testing on assigned projects
Participate in reviews (document, design, functionality and code reviews)
Actively contribute to the improvement of software development processes
Development of User Manuals and Training the end users


Requirements / Qualifications:

Minimum 2-3 years of .Net C# programming experience
Experience in Blazor ASP.NET \ WinForms and WPF GUI
Extensive experience in design techniques and tools as used in Software
Bachelor's degree qualifications or equivalent in Software or Computer Engineering
Experience in using Telerik components is an advantage
Experience in SCRUM master roles and experience in a working SDLC will be advantageous
Some knowledge and workign experience in relational databases (MySQL) and Non-relational DBs such as MongoDB.
Knowledge of design patterns including Singleton, MVVM, Event Driven, WinForms and WPF
Knowledge of Microservices and XML serialization
Superior written and verbal communication skills

Job Description:

• Perform functional and aesthetic inspection of aircraft cabin interiors.

• Document any defects, perform troubleshooting and carry out rectification.

• Support cabin modification, retrofitting and component repair tasks.

• Any other duties as assigned by the supervisor

Requirements:

• NITEC / Higher NITEC, preferably in an Engineering discipline

• At least minimum 2 years of relevant aircraft cabin maintenance experience

• Able to work flexible hours, including weekends and public holidays (rotating shift hours)

Job Objective/s

Sets direction and drives for product improvement to maintain product relevance and competitiveness in Denselight’s market. This position plays a critical role within the organization and works closely with engineering, product marketing & R&D teams to drive the early adoption of Denselight’s new products. The job requires a leader who can manage a team of technical & application managers efficiently, and has the ability to work cross functionally, brining different teams together to work towards common goals. The person needs to have technical depth, and be deeply analytical, identifying market trends, and translate that into new product & solution goals for the organization

Duties and Responsibilities

1. Work with the team of application managers & technical marketing managers to provide direction on technical matters as well as drive the team effectively towards the successful launch of new products and solutions

2. Set up and manage customer technical support capability, including test labs that allow the team to continuously engage and help customers develop systems and capabilities around Denslight solutions

3. Develop continuous product roadmap in collaboration with CTO

a. Analyse market & competitive trends and then translate this into product specifications that the R&D team will need to deliver in order to sustain continuous growth

b. Own the product development/improvement plans of existing products, which includes getting the budgets & approvals

c. Lead the product engineering team to set and execute improvement goals for product engineering group to be in line with company objectives

d. Leads and manages continuous improvement activities of the Product Management function, identifying opportunities to improve performance through ongoing productivity enhancements

4. Clarify Denselight’s primary value proposition, and work with the internal teams to develop a strategy to target potential customers that can drive growth

5. Lead in product customization projects.

a. Plays the role of chief architect in product customization projects with consultation with CTO

b. Lead cross functional team and drive for timely completion of customization projects that meet customer specifications

6. Set and ensure seamless transition of NPI product to manufacturing. Setup and ensure adherence to system for products to be transitioned from NPI to manufacturing. Ensure timely launch of new products, and all deliverables like samples, customer read collaterals, customer are available on time.

7. All other duties reasonably assigned.

Qualification Guidelines

Minimum Education

Bachelor’s Degree in Engineering

Minimum Experience

Minimum 15 years’ working experience with technical background in optoelectronics, technical and marketing application sales in optical component, photonics device system and sub-system.

Electrical-mechanical sensor experience an added advantage for alternate marketing skill set. Silicon photonics and LED product line management experience.

Specific Knowledge / Skills

Knowledge of market research, Familiar with CRM & ERP System

Can communicate in English fluently

Understand the basic business policies and terminology.