Network Lead will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services. Experience in leading a team of 3-5 network engineer. A relevant IT degree and CCIE is preferred.

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Key Responsibilities:

• Perform administration, support and operation of the project's security solution platforms and supporting infrastructure, focusing on Privileged Access Management (PAM), Network Intrusion Prevention System (NIPS), Wireless Intrusion Prevention System (WIPS), Network Access Control (NAC) and common systems (Windows and Linux OS, System Monitoring, Backup, Hypervisors and SAN Storage).
• Prepare professional reports and slide decks for submission to client on operational status
• Attend operational meetings with client
• Maintain and update documentation for operations, including asset lists, account lists, DR and health check plans
• Identity, evaluate and recommend enhancements to operational processes and procedures.
• Execute changes in accordance with the established change management process
• Support key activities including execution of BCP and DRP
• Implement approved service requests from the client within required timelines
• Support vulnerability assessments and remediate findings
• Support investigation of security incidents

Requirements:

• At least 5 years of experience in mid-sized Day 2 operations, out of which at least 2 years in providing technical support and administration of the focused security solutions
• At least 2 years of experience in supporting common systems and infrastructure is preferred
• Strong troubleshooting and analytical skills for resolving issues and delivering updates to stakeholders
• Positive working attitude and a team player
• Strong interpersonal and communication skills, as this role entails 50% of time in client premises

Responsibilities:

• Conduct time and motion studies to identify touch time elements which represent part of manufacturing process across all customer's product models.
• Analyzes data and process to establish the cookbook and compute touch time and non-touch time of each product model through E2E process
• Investigate current processes and drive continuous improvements projects for quality, productivity, and cost effectiveness
• Ensure smooth process flow with high quality, high yield, low cost by working with the respective matric owners to track and achieve the overall committed targets of KPIs
• Work with Senior Engineers to set up process recipes of newly introduced processes or new process equipment or tools.
• Any other ad-hoc duties as assigned in accordance to business needs

Skills and Requirements:

• Diploma/Bachelor’s degree in industrial technology, Manufacturing Engineering Technology, or related field required.
• Minimum 2 years’ experience in manufacturing engineering or relevant field
• Prefer to have Kaizen/Lean manufacturing experiences.
• Excellent in analytical, organizational, and interpersonal skills
• Attention to detail and data accuracy
• Must be a team player and highly motivated.
• Flexibility and ability to change priorities.
• Ability to multi-task with strong sense of urgency; ability to meet deadlines.

OTHER INFO:

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• 
  Working Days / Hours: Normal Shift: 8am - 5.30pm or 8.30am - 6.00pm [Mondays to Fridays]

---------------------------------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

The principal engineer associates in this role, function as information technology (IT) professionals serving as technical experts and participate in or oversee a variety of analytical and technical assignments that provide for problem diagnosis and solutions documentation, implementation, administration, support, and maintenance of a variety of hardware, software, and network products in an information technology infrastructure environment. The role is broadly split between providing day to day operational support for existing infrastructure services and users of those services, and project-based work leading to the development and deployment of new infrastructure services.

Responsibilities

• Provide maintenance and support for the network services
• Experience working in LAN/WAN/WLAN/SDN/SD-WAN/IPS/ISE
• Design, implement, and maintain the organization's network infrastructure, including routers, switches, firewalls, load balancers, and other network components
• Collaborate with cross-functional teams to design network solutions that align with business objectives and ensure scalability, security, and performance
• Configure and optimize network devices to ensure seamless connectivity, data transmission, and network performance
• Troubleshoot and resolve complex network issues, conduct root cause analysis, and implement corrective actions
• Monitor network performance, conduct capacity planning, and implement necessary changes to optimize network performance and ensure high availability
• Implement network security measures, including firewalls, access controls, and monitoring tools, to protect the organization's data and systems
• Maintain accurate and up-to-date network documentation, including network diagrams, configurations, and standard operating procedures
• Stay updated with emerging network technologies, industry trends, and best practices, and make recommendations for continuous improvement
• Develop test cases and conduct proof of concept tests on new software and hardware prior to upgrade/deployment
• Able to perform as the role of Project Lead / Coordinator in project management for small to medium size projects or Service Requests
• Work closely with Project Manager / Service Delivery Manager to fulfil project deliverables and operational request
• Able to establish TAC cases with the principal vendor for complex problem until its resolved
• Able to work independently

• Bachelors degree in computer science, Information Technology, or a related field
• 7 or more years of experience as a Network Engineer, with a focus on designing, implementing, and maintaining complex network infrastructures
• Strong knowledge of network protocols, and advanced in routing protocols such as (BGP, OSPF)
• Proficient in configuring and troubleshooting various network devices
• Knowledge of advanced multicast routing and QOS is a plus
• Experience with network security technologies, including firewalls, IDS/IPS, NAC, Web proxy and VPN technologies
• Relevant network certifications such as CCNP. CCIE is a plus
• Solid understanding of network monitoring tools and protocols
• Experience with Software Define Network technologies such as Cisco ACI is a plus
• Strong analytical and problem-solving skills, with the ability to diagnose and resolve complex network issues
• Excellent communication and collaboration skills to work effectively with cross-functional teams and stakeholders

JOB DESCRIPTION:

• Control FPSO TOPSIDE engineering work including Detail Engineering Subcontractors, EPC package supplier, and supplier documents.
• Prepare and keep detail Engineering Procurement Construction Integration (EPCI) schedule for topside in FPSO project.
• Overall responsibility for all project activities under assigned scope management of discipline in engineering, procurement and construction Integration.
• Coordinate and follow up with design disciplines with emphasis on flow of inputs between design disciplines and highlight critical problems to head of disciplines and engineering managers.
• Review project/technical specifications for FPSO topside engineering.
• Manage detail engineering subcontractor’s quality and schedule during FPSO topside detail engineering stage.
• Support to establishing project control systems for the project schedule and cost. This includes development of the project baselines.
• Assist Project Manager and Project Control Manager to prepare the job execution plan in the parts related with engineering schedule, budget and resource planning.
• Set-up and maintenance of control work includes - scope monitoring (scope of works and supply in the Contract and those in the agreements among Joint Venture/Consortium, Sub-contractors), change order management, Overall Schedule Management, Risk Management (Risk identifications, monitoring and mitigation), Project Reporting.
• Set-up and maintenance of Letter Management System and Electronic Document Management System includes – establishing information exchange flow and document exchange flow among Joint Venture/Consortium, Vendor and Sub-contractor.
• Hold, manage and attend regular (weekly, monthly, progress) and key meetings within Project and with other engineering design disciplines to understand design issues and work out satisfactory solutions.
• Develop and coordinate the reporting system and reflect to the project.

JOB REQUIREMENT:

• Bachelor’s degree in department of Chemical Engineering.
• Minimum 6 years of working experiences in project management department for engineering company.
• At least a 1 year of working experiences in FPSO related project.
• At least 2 years of working experience as Project engineer in design office and construction site for Power Plant Project.
• Willing to travel and/or station in module fabrication yard, structure pre-fabrication shop, detail engineering subcontractor’s office as project engineer.
• Familiar and aware of collaboration between inter-discipline engineering activities with proactive mind.
• Familiar with scheduling software such as MS Project.
• Must be familiar with Electronic Document Management System such as TeamBinder.
• Familiar with material control system such as SPMat.

Job Description Summary

Our Security Solutions team works closely with other security engineers to deliver security solutions to the project for our customers. You will play a part in the team to research, design, architect and implement security solutions such as Endpoint Protection, Endpoint Detection and Response (EDR), SIEM, SOAR, Threat Intel Platform, etc.

If you are someone with a strong passion in security technologies and is a team player who strives in a team setting, we welcome your application!

Key Responsibilities

• Carry out implementation, maintenance, support and operation of the project's security solution platforms.
• Maintain understanding of the architecture and work with security team to understand the use case and playbooks to be created.
• Identity, evaluate and recommend new areas of improvements for the implementation.
• Perform day to day operational task, scheduled change requests, troubleshooting and maintenance of the implementation.
• Develop and maintain automation infrastructure for build and maintenance of security solutions
• Managing of security solutions, including patch management such security solutions.
• Support vulnerability assessments by reviewing and providing remediation to the security hardening of the security solutions.
• Involvement in improving and evolving workflow, processes and best practices to increase system maintenance efficiency and security standards.
• Sharing of knowledge through technical documentation, knowledge based articles and sharing sessions with fellow peers in the team.
• Collaborate with relevant parties and provide consultation as a Subject Matter Expert (SME) to deliver final project outcome
• Reviewing and finetuning firewall rules and IPS signatures for enhanced security controls
• Test and update Endpoint Protection and EDR signatures
• Extracting quarantined malware for reverse engineering
• Creating and maintaining EDR blacklist
• Onboarding new log sources to SIEM and Data Lake
• Crating and maintaining log parsers / data flow for onboarded logs

Requirements

• At least 3 years of experience in providing technical support and administration of the security solutions (Endpoint Protection, EDR, SIEM, SOAR, Threat Intel Platform, etc)
• Working experience in powershell, bash and/or python scripting
• Strong troubleshooting and analytical skills for resolving issues and delivering updates to stakeholders
• Basic project management skills
• Positive working attitude and a team player
• Passionate in information security and keen attitude to learn
• Professional certificates such as SIEM Certified Administrator, SIEM Certified Architect, SOAR Certified Administrator, equivalent or more.
• Professional training or certificates in Splunk, McAfee, Carbon Black, Anomali, RSA SecurID will be an added advantage
• Disciplines in Computer Science, Computer or Electronics Engineering, Information Technology or related qualifications

This role involves a blend of technical expertise, customer service, and sales support, ensuring optimal use of our ITCH operations.

Key Responsibilities:

- Client Support: Assist clients in understanding and utilizing data from ITCH operations.

- Address any queries or issues, ensuring a high level of customer satisfaction.

- Optimization of ITCH Operations: Guide clients in enhancing the efficiency and effectiveness of ITCH operations.

- Claims and Warranty Assistance: Provide support in the event of claims and manage warranty-related issues.

- Technical Demonstrations: Conduct on-site demonstrations of equipment for crew members when ships are in port.

- Onboard Trials: Join ships on voyages to demonstrate the ITCH system in action, showcasing its features and benefits.

- Sales Support: To assist the regional sales director and colleagues with sales-related activities to drive regional growth, when not engaged in the above activities.

Qualifications:

- At least 1 to 2 years in operational roles within Maritime / Shipping industries. Ex ship-cadets are welcome to apply.

- Professional technical maritime certificates, or Diploma in Marine Engineering.

- Technical proficiency, with the ability to understand and operate equipment.

- Strong problem-solving and customer service skills.Willingness to travel, including joining ships for voyages.

- Good communication and presentation skills.

- Collaborative mindset, able to work closely with the sales team.

- Benefits:Opportunity to be a part of a dynamic and innovative team.

- Exposure to diverse regions and maritime operations.

- Competitive salary and benefits package.

Employment Type
Full-time

Edit job description

Job Responsibilities:-

• Responsible for toplevel and blocks whose complexity is at the limit of current tool capacity
• Responsible for all aspects of physical implementation, include floor-planning, physical synthesis, clock-tree synthesis, parasitic extraction
• Responsible for IO ring design and bump implementation, meeting ESD, EMI and SSO requirements
• Implementation of Low power layout methodology (multiple switchable power domains, level shifter)
• Execution of static and dynamic drop, ramp up analysis using Redhawk
• Perform static timing analysis to handle complex timing closure
• Work with other design engineer in Synthesis, Design for Testability, STA/timing closure and Equivalent checks to resolve issues

Job Requirements:-

• Master’s/Bachelor’s Degree in Electrical/Electronics Engineering with an emphasis in IC design with minimum 5 years or more related experience
• Experience with complex Low Power SOC in 16nm/7nm, 5nm is a plus
• Good experience with Cadence or Synopsys implementation tool (Tempus, Innovus, DC, ICC2, Fusion Compiler), experience with Cadence implementation tool is a plus
• Experience in Mentor Verification tool, Calibre
• Experience in Redhawk
• Proficient in TCL code, python knowledge is a plus
• Able to work in a multi-cultural team with a strong drive to excel
• Good written and communication skills

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Responsibilities:

• Translate software requirements based on business logic into concise programming code for new application
• Perform code maintenance for existing applications
• Increase program efficiency and adapting to new requirement, as necessary
• Work with team to plan program code enhancements and changes
• Conduct feasibility study on upcoming SIEM technology
• Work closely with clients and team members to understand the departmental stakeholder requirements that drive the analysis and design of quality technical solutions
• Responsible for the design and implementation of applications’ build, release, deployment, and configuration activities
• Work with internal business partners to gather requirements, prototyping, architecting, implementing/updating solutions, building and executing test plans, performing quality reviews, managing operations, and triaging and fixing operational issues
• DevSecOps Engineers require the ability to interact, develop, engineer, and communicate collaboratively at the highest technical levels with clients, vendors and partners
• Participate actively in any ad-hoc projects and tasks as assigned by your supervisor

Requirements:

• Some experience and proficiency in Python or Java would be advantageous
• Working knowledge of database in MS SQL or any RDBMS
• Must be able to adjust to constant business change; common types of changes include new requirements, evolving goals and strategies, and emerging technologies
• Familiar with Microsoft Windows operation and development
• Working knowledge in IP data networks
• Good team player
• Good Communication and writing skills
• Demonstrated ability to work with people at all levels within an organization.

Roles & Responsibilities

Job Description & Requirements

Be involved in the planning of civil engineering works.

To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

Any ad-hoc duties as assigned by the Manager.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

The Senior Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

What You Will Do:

• Under the supervision of an experienced engineer or engineering manager, performs detailed engineering review of plans as assigned for compliance with applicable Rules, Regulations and contract commitments.
• Performs work which involves conventional engineering practices but may include moderately complex problems such as the resolution of conflicting design requirements, material standards or coordination of activities among other disciplines.
• Drafts technically accurate and timely reports, and responses to client letters, faxes and other forms of communication for review by an experienced engineer or engineering manager.
• Prepares accurate and timely weekly reports and billing on all work performed.
• Communicates the status of the current workload to all appropriate members of the team to ensure the needs of the clients will be met.
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Works as a team member within the group. May work autonomously, once trained, with minimal supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering, Marine, Mechanical, or Electrical Engineering, or other related disciplines; an M.S. is preferred.
• Graduate from University and a minimum of five (5) years of related industry experience.
• Preference for graduates from a marine-industry-recognized college or university.
• Experience in international business and technical processes, as well as international requirements and problem resolution, is necessary.
• International experience or knowledge of international business and related technical processes, requirements, and problem-solving skills.

For those with Hull backgrounds

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering or other related disciplines; an M.S. may be preferred.
• Demonstrated computer literacy in engineering software.
• Exposed to Finite Element Method (course work or supervised research).
• For those with seven (7) years or less Machinery backgrounds or experience
• B.S. degree in Marine, Mechanical or Electrical Engineering or other related disciplines.

For those with Machinery backgrounds

• Seven (7) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society or
• Seagoing engineering license or professional/chartered engineer license and four (4) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others.
• Familiarity with the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).

JOB DESCRIPTION

l Prepare basic design document including system study report, heat balance, piping and instrument diagram, equipment data sheet, etc. of power plant

l Independently handle kinds of Package equipment ; GTG(gas turbine generator), STG(steam turbine generator), boiler, HRSG(heat recovery steam generator), water treatment package, wastewater treatment package, surface condenser, nitrogen generator unit, cooling tower, chemical dosing unit, etc.

l Take the lead in the preparation of inquiry packages, in the technical clarification/evaluation of Vendor’s technical offers, and in the kick-off meeting/pre-inspection meeting with an inter-discipline collaboration.

l Prepare technical specifications including package equipment data sheets, detail design documentation & Inspection/Procedure documentation requests for Package equipment as shown the above.

l Prepare technical bid evaluation and clarification with Vendors for technical confirmation for package equipment as show the above.

l Review of the vendor packages and follow up on the required approvals.

l Prepare interface list for package and client requirements

l Follow up of all engineering issues for module engineering and close any outstanding issues as promptly as possible.

l Review / approve vendor documents in line with client / contractor’s requirements.

l Attend project meeting / follow up meeting with vendors, client, third party etc.

l Witness factory acceptance tests (FATs) along with client / contractor’s requirements.

l Assist construction team during module fabrication, equipment installation, and assist the pre-commissioning and commissioning team during yard testing.

l Assist procurement team as required during the ordering stage.

l Have skill of combined cycle system analysis software (GT pro. and Master) and calculation program of steam/water condition (steam calc.)

l Have skill of DX tools such as data analysis software (Grafana and Tableau), document search software (Goldfire), Microsoft 365 and document revision analysis (Middle)

l Have made programs and been used inter discipline, e.g., combustion calc., acid due point calc., HRSG and condenser heating surface calc., chemical dosing calc., piping pressure drop calc., coal characteristic analysis, etc.

Have experience as a lead engineer more than 35 years for large scale project for oil & gas project, petrochemical project and refinery project each project with more than 3,000 drawings.

l Have knowledge about applicable international codes such as ASTME, ASTM, EN, BS, VGB, ISO, IEC, NFPA, API, JIS, Gost and GB

Qualifications:

Bachelor’s Degree in Mechanical Engineering

At least 8years of experience as Design Engineer in Mechanical Engineering of Oil & Gas Plant, Petrochemical and Refinery, and in Basic Engineering of Power Plant.

l Bachelor’s Degree in Mechanical Engineering

At least 40 years of experience as Design Engineer in Mechanical Engineering of Oil & Gas Plant, Petrochemical and Refinery, and in Basic Engineering of Power Plant

JOB DESCRIPTION:

- Pressure vessel and tank design in accordance with ASME Boiler & Pressure vessel Code section II, VIII (Div.1 & 2) and IX, API 650 TEMA, JIS B8265 and JPI.

- Take the vendor’s technical quotation review, clarification and evaluation, leading the kick-off meeting/design review meeting, supporting the pre-inspection meeting, coordinating with other disciplines (Project, Process, Civil, Piping, Electric, Instrument, Transportation, Construction, etc.).

- Prepare Requisition including basic technical requirements, detail design requirements, general documentation requirements, inspection and procedure requirements, etc.

- Evaluate performance of vendor’s design equipment such like plate heat exchangers, filters, drum, etc.

- Review vendor package design including 3D model (Navis Works) and follow up on the required approvals.

- Review / approve vendor documents in line with client / contractor’s requirements.

- Follow up of all engineering issues and close any outstanding issues as promptly as possible.

- Monitor and control vendor’s document submission status. Expedite vendor if any delay.

- Coordination with vendors and global project disciplines for the proper execution of the project.

- Attend project meeting / follow up meeting with vendors, client, third party etc.

- Review thermal rating result of shell & tube heat exchangers in performance point of view.

- Discuss technical issue in design review meeting with vendor to close comments of vendor documents for equipment including package items.

- Assist site team during construction and commissioning stage

- Conduct trouble shooting, investigate root cause, propose countermeasure.

- Assist procurement team as required during the ordering stage.

- Vendor qualification work including check of Design/QAQC/Fabrication capability, vendor’s experience, fabrication sequence & typical schedule, work load, etc.

JOB REQUIREMENTS

- Master’s Degree in Mechanical Engineering.

- More than 5 years of experience as Design Engineer in Pressure Vessel Engineering field in Chemical Plant

- Work experiences at Chemical Plant site in Singapore as field engineer for 6 months and worked for pre-commissioning/progress monitoring for Static equipment and equipment preservation. Communication with vendor supervisor.

- Inspection experience of Static Equipment (Carbon Steel Drum, Stainless Steel Drum and FRP Tank etc.) at vendor’s shop.

- Contribution as a lead engineer for static equipment design for any types of projects such as feasibility study, FEED, EPC and proposal work also.

- Communication with global office engineers.

- Strong engineering knowledge in static equipment for high pressure/temperature, various materials types (carbon steel, stainless steel, duplex stainless steel, etc.), various material constructions (clad/weld overlay/lining/mono-wall/multi-wall), welding including tube-to-tube sheet and dissimilar welding.

- Familiar and aware of collaboration between inter-discipline engineering activities.

- Attendance of 2-weeks Welding Training at Hitachi Zosen Corporation in Kumamoto, Japan, experience of actual welding work (SMAW, SAW, FCAW, TIG) and non-destructive examination for weld joint (PT, MT, UT, RT).

- Speaks and write proficent English and Japanese

Responsibilities:

• Provide basic support to end-users and application teams for security tools, including installation, configuration, and troubleshooting.
• Collaborate with vendors to acquire necessary updates, patches, and support for security tools.
• Assist in monitoring security tool alerts and notifications, escalating potential issues to the appropriate teams when necessary.
• Maintain an up-to-date inventory of all IT security tools, including antivirus software, EDR, microsegmentation, and other security solutions.
• Regularly reconcile security tools inventory with active licenses and installations to identify discrepancies and ensure accurate asset management.
• Generate reports on tool inventory, license status, and reconciliation results for management and compliance purposes.
• Maintain organized records of reconciliation activities, updates, and communications with vendors.

Qualifications:

• Basic understanding of IT security principles and practices.
• Strong organizational and documentation skills.
• Attention to detail and a focus on accuracy.
• Familiarity with IT security tools and their functions.
• Effective communication skills to collaborate with internal teams and vendors.

Responsibilities

• Perform systems health check and first level troubleshooting
• Implementation of patches and validation after patching
• Work with the next level for problem resolution

Requirements

• Minimum ITE in electrical/electronic engineering, computer science or related discipline
• Good communications and written skills
• Good problem-solving skills
• Ability to work in a team and independently

Preferred Skills /Qualities

• IT Infrastructure knowledge (Computer Systems, Operating Systems, Networks)
• IT Industry certification –CCNA, ITIL or equivalent (preferred)

Responsibilities:

• Assists Project Manager in project planning and to co-ordinate and oversee all work on the site.
• Study drawing, plans, specification and scope of work.
• Responsible for submission of material sample and shop drawing.
• Monitoring closely of construction work progress, materials, plant and equipment.
• Carry out site visit, attend site test and inspection and temporary work.
• Workout and maintain VO schedule.
• Verification of material requisition and taking off quantities/site measurement.
• Prepare progress claim to Main-contractor on monthly basis.
• Prepare payment certificate, verify sub-contractor work progress.
• Ensure quality standard and Safety Requirements are adhered to.
• Work closely with project team and resolve all technical issue.

Requirement:

• Diploma in Engineering / equivalent.
• Min. 3 years ACMV work experience in M&E construction industry is Preferred.
• Able to handle multiple projects simultaneously.
• IT skills in Microsoft office, Autocad.

Please include the following information in your resume:

• Education background
• Working experience
• Reason of leaving current and past employment
• Current salary
• Expected salary
• Notice period

Roles & Responsibilities

Job Description:

· To be responsible for all the execution of Contracts progress.

· To monitor the installation progress as well as co-ordination with Clients, Consultants, Subcontractors to ensure efficient and timely delivery of assignment.

· To report and monitor of progress of project to Project Manager.

· To supervise and ensure works are in accordance to the contract drawings and specifications.

· To prepare method statement, shop drawings, installations / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.

· To coordinate with subcontractors and consultants on preparation and submission of shop drawings.

· To coordinate / prepare technical submissions with suppliers / subcontractors.

· To assist the Project Manager to negotiate / procure materials, equipment and labour in accordance to (or below) the allocated approved budget.

· To hold technical discussions with various stakeholders to resolve technical / site issues.

· To liaise and work with relevant authorities / subcontractors / clients on shop drawings / equipment submissions, inspections, testing requirements and commissioning.

· Electrical: Familiar with electrical panel and wiring installation, BMS, SCADA

· Process utilities facilitation and hook-up: familiar with PCW, AEX, SOX, GEX, RODI, TCW, CDA, N2, City water,

Job Requirements:

· Diploma or Degree in Electrical / Mechanical Engineering or equivalent.

· Min. 3-5 years’ experience in construction industry in Singapore.

· The candidate will assist and support the Project Manager in handling and monitoring the progress of projects.

· Well versed in English.

· Able to commence work immediately or short notice.

· Proficient in Ms Word, Excel, Power Point, Project, and report generation.

· Fast learner

· Able to work independently

· Strong engineer sense and common sense

Our SIEM & Automation team works closely with other security analysts to deliver security content to monitor security threats, and automate the escalation / response for our customers. You will play a part in the team to research, design, architect and implement security use case and automation playbooks.

If you are someone with a strong passion in security technologies and is a team player who strives in a team setting, we welcome your application!

Key Responsibilities

• Carry out implementation, maintenance, support and operation of the project's security monitoring use cases and automation playbooks.
• Maintain understanding of the architecture and work with security team to understand the use case and playbooks to be created.
• Identity, evaluate and recommend new areas of improvements for the implementation.
• Perform day to day operational task, scheduled change requests, troubleshooting and maintenance of the implementation.
• Create, finetune and maintain SIEM data sources, use cases, correlation rules and security alerts classifications
• Create, finetune and maintain SOAR playbooks
• Create and maintain UEBA use cases

Requirements

• At least 3 years of experience in security operations in a SOC environment
• At least 2 years of experience in creating, finetuning and maintaining correlation rules and playbooks
• Working experience in powershell, bash and/or python scripting
• Strong troubleshooting and analytical skills for resolving issues and delivering updates to stakeholders
• Basic project management skills
• Positive working attitude and a team player
• Passionate in information security and keen attitude to learn
• Professional certificates such as AWS Certified SysOps Administrator Associate, Microsoft Azure Administrator Associate, GCP Associate Cloud Engineer, equivalent or more.
• Disciplines in Computer Science, Computer or Electronics Engineering, Information Technology or related qualifications
• Professional certificates such as SANS (such as SANS GCDA, GCIA, GDSA, GMON) would be an advantage

Key Accountabilities:

Technical requirements:

Understands the specifications and requirements in the area of mechanical rotating equipment (such as centrifugal pumps, positive displacement pumps and others) within the assigned package. - Responsible for mechanical design and selection of rotating equipment in accordance with applicable international codes according to ITB or relevant specification.

Engineering document preparation:

Under minimum guidance, prepares technical specifications/standards and requisitions.

Supplier selection:

Under minimum guidance, evaluates the technical and engineering aspects of bids received from suppliers and gives assessment to the senior engineer.

Supplier management:

Assists in placing and executing the orders. For approval, reviews submitted from suppliers’ documents (such as data sheets, drawings and procedures) for their fabrication and compliance. To be a focal point, communicates and coordinates with stakeholders.

Support for other discipline:

Provides technical/engineering support/visit and cooperates for raising the quality level at fabrication shop and participated in construction / commissioning work at site under guidance by the lead/senior engineers.

Technical issue resolution:

With minimum guidance, resolves technical issues using acquired knowledge during the execution of engineering stage, fabrication stage and post-delivery.

Compliance with HSSEQ policies:

To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behavior.

Qualifications:

- Bachelor Degree in Engineering

- Minimum 5 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in off-shore application

- Possess relevant experience working on EPC projects

- Familiar with International Industry Codes such as ASME, API etc

-Able to speak and write proficient Eng and Jap has an addtional advantage.

Technical:

- Advanced Microsoft Office

- Intermediate AutoCAD

Leadership

- Communication skills

- Adaptability

- Ability to translate business information to technical requirements

Work Conditions

Most of the working time is in the office. Engineers can be sent to suppliers’ s sites/offices and project sites including Offshore for construction and commissioning support.

Responsibilities:

• Assists Project Manager in project planning and to co-ordinate and oversee all work on the site.
• Study drawing, plans, specification and scope of work.
• Responsible for submission of material sample and shop drawing.
• Monitoring closely of construction work progress, materials, plant and equipment.
• Carry out site visit, attend site test and inspection and temporary work.
• Workout and maintain VO schedule.
• Verification of material requisition and taking off quantities/site measurement.
• Prepare progress claim to Main-contractor on monthly basis.
• Prepare payment certificate, verify sub-contractor work progress.
• Ensure quality standard and Safety Requirements are adhered to.
• Work closely with project team and resolve all technical issue.

Requirement:

• Diploma in Engineering / equivalent.
• Min. 3 years PSG work experience in M&E construction industry is Preferred.
• Able to handle multiple projects simultaneously.
• IT skills in Microsoft office, Autocad.

Please include the following information in your resume:

• Education background
• Working experience
• Reason of leaving current and past employment
• Current salary
• Expected salary
• Notice period

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

We are looking for a research engineer / fellow to help us develop a novel design for a blast door system as part of an industrial research project developing. The results of this project will be used in projects throughout Singapore. It is our aim to include all the door components in the analysis, making this a holistically developed solution.
The research will be conducted using numerical simulations, experiments and analytical solutions. The successful candidate will have a chance to acquire in depth experience in all these aspects of protective research and design.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Be responsible for these technical deliverables:Develop models of the door system using advanced finite element software.
  Plan and conduct blast testing of the proposed solutions.
  Conduct laboratory tests of components as needed.
  Develop analytical models for fast design.
  
• Carry out Risk Assessments and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaise with vendors/suppliers.
• Work independently, as well as within a team, to ensure the achievement of the project objectives and proper operation and maintenance of equipment.

Job Requirements:

• Have a basic knowledge of structural dynamics.
• Have a degree (preferably Master’s or PhD) in mechanical engineering, electrical / electronics engineering or related domains.
• Knowledge of blast and shock loading theory and applications would be advantageous
• Knowledge of non linear materials modelling would be advantageous

Key Competencies

• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work
• Have some experience in the use of advanced FEM analysis. This could include experience in ABAQUS, LS-Dyna, Radioss or equivalent software.
• Able to support other related laboratory tasks as needed
• Willing to learn new skills as needed for the project

Our SIEM & Automation team works closely with other security analysts to deliver security content to monitor security threats, and automate the escalation / response for our customers. You will play a part in the team to research, design, architect and implement security use case and automation playbooks.

If you are someone with a strong passion in security technologies and is a team player who strives in a team setting, we welcome your application!

Key Responsibilities

• Carry out implementation, maintenance, support and operation of the project's security monitoring use cases and automation playbooks.
• Maintain understanding of the architecture and work with security team to understand the use case and playbooks to be created.
• Identity, evaluate and recommend new areas of improvements for the implementation.
• Perform day to day operational task, scheduled change requests, troubleshooting and maintenance of the implementation.
• Create, finetune and maintain SIEM data sources, use cases, correlation rules and security alerts classifications
• Create, finetune and maintain SOAR playbooks
• Create and maintain UEBA use cases

Requirements

• At least 3 years of experience in security operations in a SOC environment
• At least 2 years of experience in creating, finetuning and maintaining correlation rules and playbooks
• Working experience in powershell, bash and/or python scripting
• Strong troubleshooting and analytical skills for resolving issues and delivering updates to stakeholders
• Basic project management skills
• Positive working attitude and a team player
• Passionate in information security and keen attitude to learn
• Professional certificates such as AWS Certified SysOps Administrator Associate, Microsoft Azure Administrator Associate, GCP Associate Cloud Engineer, equivalent or more.
• Disciplines in Computer Science, Computer or Electronics Engineering, Information Technology or related qualifications
• Professional certificates such as SANS (such as SANS GCDA, GCIA, GDSA, GMON) would be an advantage

Roles & Responsibilities

Responsibilities

• Maintain a deep understanding of DevOps practice, tools, and their architecture for on-premise and cloud projects delivery. (i.e. Ansible, Chef, Puppet, UIPath, Jenkins, Git, CodeCommit, Terraform, Packer, CloudFormation, Pulumi)
• Drive adoption of DevOps and Automation lifecycle with proper processes and versioning control.
• Implementing DevOps platform with best practices and framework for continuous delivery pipeline; meeting customer environment security requirements.
• Work closely with project leads to understand existing processes, issues, or requirements for DevOps practice adoption in different key areas. (i.e. Application Delivery, Application Integration, Infrastructure as a Code, Security Assessment and Remediation)
• Analyze, measure, and prioritize requirements for delivery.
• Develop playbooks, automation scripts, workflows for discussion and recommendation to meet the delivery requirements in sprints.
• Plan, develop, test, and implement the basic structure to aid project members in DevOps adoption in delivery of identified project requirements.
• Mentor and guide project engineers during their implementation and their continual practice during operations.
• Maintain DevOps technology stack for practice and training purposes (i.e. GIT, Kubernetes, OpenShift, Ansible, UIPath)
• Does active research on the new and emerging DevSecOps trends, practices, and technologies to meet market changes.
• Maintain strong interest and keen understanding of cybersecurity solutions and their delivery formats to customers.

Requirements

• Degree in Engineering, Computer Science/Information Technology or its equivalent;
• At least 5 years of experience in leading technical requirements and team for delivery as a technical lead;
• At least 3 years of experience and proficiency in DevOps and automation technologies;
• Able to demonstrate architecture and delivery principles for three or more of the following technologies or similar i.e. Ansible, Chef, Puppet, UIPath, Jenkins, Git, CodeCommit, Terraform, Packer, CloudFormation, Pulumi, Docker, Kubernetes, OpenShift
• Strong Linux and Unix operating system experience
• Excellent communication / stakeholder skills and emotional intelligence to influence key decisions, mediate conflicts and build consensus;
• Demonstrated ability to work with people at all levels within an organization;
• Thrives in ambiguous and complex environment with ability to analyse, make decisions and overcome show-stoppers/difficulties

Job Description & Requirements

· Incremental development of existing modules to increase reliability, reduce costs and ease manufacturing, assembly and maintenance.

· Investigate engineering change requests and implement design changes.

· Mind safety and international machine product standards.

· Abide design to cost principles in any aspects

· Create 3D modules and BOM´s incl. 2D drawings following the BESI standards and design rules.

· Work closely with other disciplines (electronics/software) to meet project objectives

· Ensure fast response to production issues

Education

BSc degree in Mechanical / Mechatronics engineering

Work experience

At least 3-5 years relevant experience in automation / equipment industries.

Significant practical experience in mechanical engineering, assembly and testing

Expertise and methodology

Proficiency in CAD software ProEngineer/Creo.

Experience with PDM/PLM software (PTC Windchill or eMatrix) is a pre.

Proven problem solving skills

Very good English skills (verbal and written)

Understanding of cost drivers within manufacturing and across the supply chain

Good knowledge of mechanical parts evaluation and qualification

Understanding of assembly procedures of complex mechatronic systems

Other requirement criteria

· Good communication skills

· Passion for continuous improvement

· Self starter, self organized

· Customer and service oriented

· Result oriented

· Team player

· Stress resistant

PRODUCT AREA

Google creates products and services that make the world a better place, and gTech’s role is to help bring them to life. Our teams of trusted advisors support customers globally. Our solutions are rooted in our technical skill, product expertise, and a thorough understanding of our customers’ complex needs. Whether the answer is a bespoke solution to solve a unique problem, or a new tool that can scale across Google, everything we do aims to ensure our customers benefit from the full potential of Google products.

To learn more about gTech, check out our video.

JOB DESCRIPTION

At gTech’s Users and Products team (gUP), our mission is to help users get the most out of Google. We represent Google's users and many of our partners globally, sharing insights with the larger Google organization to enable exceptional customer and product experiences.

gUP builds innovative solutions that take user experience and engagement with Google to the next level, supporting users across products, countries, cultures, incomes, and identities. We advocate for users through partnerships with product areas at Google (and some Alphabet businesses), supporting Google’s consumer products ecosystem and enabling numerous launches for Google’s consumer products each year.

ADDITIONAL JOB DESCRIPTION

As a Google Technical Solutions Consultant, you will be responsible for the technical relationship of our largest news partners. You will collaborate with teams in Engineering, Sales, and Product Management to leverage emerging technologies for our internal or external clients/partners. From concept design and testing to data analysis and support, you will oversee the technical execution and business operations of Google's News partnerships.

You will balance business and partner needs with technical constraints, develop innovative, cutting edge solutions and act as a partner and consultant to those you are working with. In addition, you will build tools and automate products, oversee the technical execution and business operations of Google's News products, as well as develop product strategy and prioritize projects and resources.

Qualifications

JOB RESPONSIBILITIES

• Work closely with our News Product, Engineering, and Partnership teams to develop cutting-edge solutions and provide consulting services to our news publishers to cater to client needs and build lasting relationships.
• Help news publishers in their day-to-day challenges by being the subject matter expert, delivering innovative and scalable solutions and troubleshooting their technical issues.
• Propose, design, create and present prototypes, demos, and proofs-of-concept to a wide variety of audiences from engineers to marketing professionals.
• Perform implementation reviews. Advocate for new product features, and provide partner feedback to internal cross-functional teams including Product Management and Engineering.
• Deliver Business Intelligence. Leverage internal and external data sources to provide data insights to drive decision making.

MINIMUM QUALIFICATIONS

• Bachelor's degree in Computer Science, Information Systems, related technical field, or equivalent practical experience.
• 4 years of experience in web technologies, HTML, JS, CSS, frontend and backend.
• Ability to communicate in English and Japanese fluently to manage partners who speak Japanese and English.

PREFERRED QUALIFICATIONS

• Experience working with and managing external partners/customers.
• Ability to communicate technical concepts to various audiences.
• Demonstrated thought leadership and ability to influence cross-functional stakeholders.
• Excellent problem-solving, analytical, and troubleshooting skills.