Remuneration: Basic with AWS & VB

+ $120 Transport Allowance + $66 (Flexible Benefit Allowance) + eMedical Card (cover spouse + children under 18)

Work location: MacPherson

Working hours: Monday to Friday

Job Description:

• Responsible for planning and implementing the execution of preventive and corrective programs within schedule in compliance to regulatory standards and requirements.
• Perform troubleshooting/ faut diagnosis/ failure analysis to determine cause of failure for equipment.
• Development of Standard Operating procedures (SOP) and Work Instructions (WI) to technicians to develop their competence.
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities.
• Establish and maintain proper document system to achieve all jobs internally for sharing and audit purposes.
• Assist in identification, planning and reviewing of necessary training needs for mentoring and coaching of maintenance staffs.
• Preparation and write maintenance and spares consumption report.
• Perform other duties as instructed by Management.

Job Requirements:

• Degree in Maintenance Engineering or related discipline
• 2–3 years of relevant work experience
• Ability to relate work with different stakeholders
• Proficiency in Excel, Words and Powerpoint
• Able to think and work independently and as a team member in a challenging environment

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a research project, funded by Singapore Ministry of Education (MOE), where you will be part of the research team to develop a scalable and comprehensive framework for formal verification of quantum programs. The framework consists of the following deliverables:
• Intermediate Language. We plan to develop an intermediate language to model quantum programs. The intermediate language would be complete to describe all the desired characteristics of quantum computing while at the same time simple enough to be understood by most programmers.
• Formal Verification Framework. We plan to develop a comprehensive framework to verify the correctness of quantum programs written in the proposed intermediate language.
• Mechanization. We plan to mechanize the formal framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
• Proof Automation. We plan to develop formal methods for automatic reasoning that can be materialized into commercial tools.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI) and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. develop an intermediate language to write quantum programs.
  2. develop a comprehensive framework to verify the correctness of quantum programs written in our intermediate language.
  3. mechanize the verification framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
  4. develop formal methods for automatic reasoning that can be materialized into commercial tools.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of formal methods (including theorem proving and model checking, especially theorem proving), quantum computing, and software analysis/verification.
• Have a degree in computer science, computer engineering, or related areas. Possessing a Master’s or PhD degree will be advantageous
• Knowledge of separation logic and quantum program analysis/verification will be advantageous.

Key Competencies:

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges:

As quantum computers are operated in extreme physical conditions and thus the cost per run is significantly high, it is desirable to verify the correctness of a quantum programs before the execution. However, the verification task of quantum programs is challenging due to the following reasons:

• Quantum programs (even written at high-level languages) are complicated to comprehend as it requires a good understanding of quantum mechanics and the relevant advanced mathematics.
• The quantum states are exponentially huge in size because the state of a classical bit is either 0 or 1 at any time, while the state of a quantum bit (qubit) can be in the superposition, where both states 0 and 1 can co-exist simultaneously. This induces the state explosion problem for brute-force-like methods.
• Quantum states are naturally probabilistic thus may yield different results on different runs, which is challenging for the testing and debugging methods.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a flexible array ultrasound imaging system for velocity estimation.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Collaborator and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  i. To develop simulation models for flexible array ultrasound system
  ii. To develop custom phantoms for experimental studies
  iii. To design and develop non-linear signal processing algorithms including deep learning algorithms for image reconstruction
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of digital electronics, signal processing, machine learning and deep learning.
• Have a B-Engg or B. Tech degree in Electronics, Computer or Biomedical Engineering with undergraduate projects related to the relevant competence mentioned.
• Knowledge of biomedical signal processing will be advantageous.
• Should have proficiency in Matlab or Python.
• Prior experience in publishing is desirable.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges

• Integration of flexible arrays with research ultrasound platform
• Design and development of deep learning-based flexible array adaptive image reconstruction pipeline

As a global leader in power and thermal management solutions, Delta Electronics was founded in 1971 and is headquartered in Taipei, Taiwan with annual revenue exceeding $13 billion. Our wide range of products and solutions cover power supplies, energy management systems, display solutions, and industrial automation products.

We are known for our focus on innovation, sustainability, and energy efficiency. Active investment in research & development, and implementation of cutting-edge technologies ensures our business drives positive environmental impact.

Looking forward to having you join our 85,000 colleagues in building a Smarter and Greener future, Together!

Position Overview:

As a Datacenter Infrastructure Field Application Engineer or Presales Engineer, you will be responsible for supporting and driving the sales of solutions within the datacenter infrastructure field. In this role, you will work closely with customers, sales teams, and other technical personnel to ensure the successful deployment and integration of CDU/Cooling systems in datacenter environments.

Key Responsibilities:

• Expertise in CDU/Cooling Solutions: Possess in-depth knowledge of Data Center products, solutions, and services, keeping up-to-date with industry trends and technological advancements related to datacenter infrastructure.
• Sales Support: Collaborate with the sales team to participate in customer meetings and presentations, understanding customer needs, and proposing appropriate solutions.
• Technical Consultation: Engage in technical discussions with customers to understand their datacenter infrastructure requirements and propose tailored solutions.
• Solution Design and Proposal: Create detailed technical proposals and designs that address customer requirements, including system configurations, power distribution, backup options, and monitoring capabilities.
• Project Management: Collaborate with project managers, engineers, and installation teams to ensure the successful implementation and commissioning of systems in datacenter environments. Provide technical guidance and coordinate tasks throughout the project lifecycle.
• Demonstration and Training: Conduct technical demonstrations and training sessions for customers and sales teams to showcase the capabilities and benefits of solutions.
• Customer Relationship Management: Build and maintain strong relationships with customers, addressing their technical queries, providing post-sales support, and proactively identifying opportunities for additional solutions and services.
• Industry Expertise: Stay updated with the latest industry standards, regulations, and best practices related to datacenter infrastructure, power distribution, and systems.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Computer Science, or a related technical field is preferred.
• Experience: Prior experience as a Field Application Engineer, Presales Engineer, or a similar role within the datacenter infrastructure industry, with a focus on CDU/Cooling solutions and power management. Experience in supporting sales teams and customers is highly desirable.
• Communication Skills: Excellent verbal and written communication skills to effectively convey technical concepts and solutions to customers and internal stakeholders. Ability to deliver compelling presentations and demonstrations.
• Problem-solving Skills: Strong analytical and problem-solving abilities to identify customer requirements, propose effective solutions, and troubleshoot technical issues.
• Project Management: Familiarity with project management methodologies and tools to manage multiple projects simultaneously, ensuring timely delivery and customer satisfaction.
• Customer Focus: Demonstrated ability to understand customer needs and offer suitable solutions. Strong customer service orientation and ability to foster long-term customer relationships.

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

Benefits:

• Basic salary up to 4.8k depending on experience
• Annual performance bonus (min 1 month)
• Annual increment
• Education sponsorship & fully paid external training
• Mobile reimbusement ($50/month)
• Dental claims ($250/year)
• AL starting from 15 days
• Fully covered GP medical fees
• Free company transportation from Clementi MRT

Key Responsibilities:

• Administer core system like Active Directory Services, Data Centre and server storage
• Manage communication tools like video conferencing, audio systems and telephony
• Configure and maintain network devices such as firewalls, routers, VPN and etc
• Ensure systems are backed up automatically and create disaster recovery plans
• Monitor system resources (CPU, storage) and apply patches
• Liaise with external vendors to ensure Service Level Agreements (SLA) are met
• Write and update user guides and administration manuals
• Provide technical support to both Local and Overseas (via LAN/WAN)
• Provide L1/L2 support in IT projects
• Other IT related duties

Requirements:

• Min Diploma in IT or Computer Science, or equivalent
• Familiar with internet architecture designs (TCP/IP, DNS, DHCP, Proxy, Firewall)
• Preferably with experience of Veeam, VMware, and UNIX/Linux
• Familiar with devices like Alcatel PABX, FortiGate Devices, Cisco and Unifi Wireless AP Controller would be advantageous
• Bilingual in English and Chinese to liaise with Chinese speaking overseas counterparts

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Basic salary: ($3200 - $4500)

Location: Serangoon

Working hours: Mon - Fri, 8.30am to 6pm

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to speak both English and Mandarin to liaise with Chinese speaking clients

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Descriptions:

• Overseeing and directing construction projects from conception to completion
• In-depth reviewing of projects to schedule deliverables and cost estimation
• Ensure safety procedures are implemented and meet company’s standard and legislation
• Ensure safety and health are in place according to building and safety regulations
• Monitor, control, and coordinate site works
• Ensure projects meet customer’s quality standards
• Any d-hoc duties as require

Requirements:

• Degree in Civil Engineering or equivalent with at least 5 years relevant experiences at or equivalent managerial level in construction
• Knowledge in Design and Auto Cad (3D) for Civil Structure work.
• Good communication skills
• Able to communicate in English and Japanese language (to handle queries and feedback from Japanese speaking associates/ clients)

Responsibilities:

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in electronics product manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

Key Responsibilities:

• Project Planning and Scheduling: Develop comprehensive project plans and schedules that incorporate all project activities, milestones, and deliverables. Utilize project management software to ensure accurate tracking and reporting.
• Risk Management: Identify potential project risks and develop mitigation strategies to minimize impact on project timelines and budgets.
• Resource Allocation: Efficiently allocate resources, including manpower, materials, and equipment, ensuring that projects are completed within budgetary constraints.
• Stakeholder Communication: providing regular updates on project progress, potential challenges, and changes to project plans.
• Quality Control: Ensure that project planning and execution adhere to industry standards, company policies, and client specifications, maintaining high quality and safety standards.
• Continuous Improvement: Analyze project outcomes and processes for lessons learned and opportunities for improvement in future planning and execution phases.
• Team Leadership: Lead and mentor junior planning engineers and other project staff, fostering a collaborative team environment.

Required Qualifications:

• Bachelor’s degree in Engineering, Construction Management, or a related field.
• A minimum of 5 years of experience in project planning and management within the construction or engineering industry.
• Proficiency in project management software (e.g., Primavera P6, MS Project, powerpoint).
• Strong understanding of engineering principles, construction methodologies, and project management best practices.
• Excellent analytical, organizational, and problem-solving skills.
• Desired Skills and Attributes:
• Strong leadership and team management skills.
• Exceptional communication and interpersonal skills.
• Ability to work under pressure and manage multiple projects simultaneously.
• Strategic thinker with a proactive approach to project planning and risk management.
• Commitment to continuous learning and professional development.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are a looking for a Application Engineer (BMS/EPMS) to make an impact!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Leading the Deployment of Application for Building Management System / Electrical Power Management System
• Lead technical discussion and clarification with the customer acting as key contact person for all technical related topics. Under Project Manager leadership monitor engineering deliverables and progress through continuous communication with team members and perform regular technical status reports.
• Take active part in meetings with the customer. Prepare and conduct Factory Acceptance Tests (FAT) with the customer.
• Perform and get customer approval on basic and detailed design of integrated solutions in line with the contract (technical, time & performance requirements) and leveraging Schneider Electric portfolio of products and systems, maximize project profitability and manage technical risk.
• Ability to work independently while also collaborating with global teams and complying to global standards.
• Produce engineering outputs such as System architecture, sub-systems interfacing points, detailed point schedules, control panel drawings, equipment and control valve schedules, description of operations, database generation, graphics development, system hardware and software configuration and programming, etc. Proposal of HVAC and EMS controls strategies in various application.
• Master all technical aspects of the Project: design, integration, testing, FAT, installation, commissioning, warranty. Validate technical choices compliance with the design (based on Technical Design Process).
• Manage stakeholders involved in the execution.

What qualifications will make you successful for this role?

• Degree in Engineering or its equivalent discipline
• 5 years leading technical projects or as Solution Application Engineer
• 5 years in his technical field of expertise (PLC/ DDC, SCADA Systems)
• Knowledge of data center and/or other mission critical facilities design, operation and maintenance.
• Proven ability to lead with agility functional and remote technical team having different fields of expertise
• Proficiency in Programmable Logic Controller, SCADA and DDC Controllers (preferably in Schneider brand) development and implementation for redundant system architectures on HVAC applications including chiller systems
• Knowledge of HVAC applications including Chiller Systems, Air Handling Units, Fan Coil units, Computer Room Air Handlers, Mechanical ventilation units, Sanitary and Plumbing, Fire Alarm, Low voltage and Medium/High Voltage Electrical systems and other miscellaneous systems.

What’s in it for me?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership

…and more!

Let us learn about you! Apply today.

Job Description:

• Preparation of project documentation e.g. tender, quotation, progress claims, drawings, checklist, etc
• Responsible for site coordination and supervising to ensure projects are completed according to schedule.
• Liaise closely with clients, consultants, and suppliers on all project-related matters.
• Attend site walks, meetings, and site inspections when required.
• To carry out technical support functions in mechanical engineering work on site.
• To ensure effective project management on design, installation, testing, commissioning, servicing, and maintenance activities.
• Attend meetings, and prepare project schedules and progress reports.
• To ensure smooth and timely delivery of the project.
• Any other duties as assigned by superior.
  

Job Requirements:

• At least a Diploma in Mechanical Engineering or its equivalent.
• Minimum 3 years of relevant working experience in M&E or the construction industry.
• Possessing relevant safety certificates is an advantage.
• Knowledge of equipment installation, testing & commissioning, and troubleshooting as per M&E drawings or engineering specifications.
• Ability to work independently and under pressure to meet tight project schedules.
• Willing to travel & based at the project site.
• Have knowledge of AutoCAD & Microsoft Office.
• Candidates without experience but with relevant qualifications will be considered as well.
  

Unified Communications (UC) Engineer/Analyst

Job Description:

• Primary handling voice incidents escalations
• Configuring and troubleshooting of CUCM, CME, Cisco Unity Connection, Cisco Unified CCX, Cisco IP Phones, Cisco IP Communicator, Cisco Jabber, Cisco Voice Gateways (SIP, H323, MGCP)
• Configuring Cisco IP Phones, Expansion Modules, Extension Mobility Profiles, Voicemail, Cisco Jabber, Cisco IP Communicator.
• Upgrading IP Phone firmware in CUCM and CME to fix vulnerabilities.
• Monitoring alerts, collecting traces and debugs for voice incidents involving call flow issues.
• Remediating all endpoints, gateways and servers and making sure all are 100% compliant.
• Engaging Cisco TAC and working along with them to resolve complex incidents.

Job Requirements:

• Degree / Diploma in computer or Electronics Engineering
• CCNP Cisco Collaboration certification
• Minimum of 14+ years of related IP telephony / Unified Collaboration /Telepresence implementation or Administration experience including some of the following:

-Knowledge with TELISCA Call Recording troubleshooting

-Setup & maintenance of Cisco Collaboration and meeting products such as CUCM, CUC, IMP, CMS, TMS.

-Capable to install, integrate, maintain, modify, improve, enhance and upgrade the hardware and software of the Cisco Collaboration products

-Experience in administration of Cisco UC servers in Cisco UCS platform

-Experience in setup & troubleshooting of H323, SIP Trunks, SCCP, MGCP Voice Gateways, etc

-Experience in Cisco IP Phones

-Experience in integration with AD, DNS, LDAP etc…

-Experience in Single Sign-On (SSO) setup and troubleshooting.

-Knowledge in Routing, Switching and Security

-Knowledge in Server, Local and Group Policy, User management, Services, etc

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• Participate in research and analysis to identify project requirements, conceptualizing plans, designing, and developing systems, establishing guidelines and goals, and creating strategy to optimize operational activities for new product introduction.
• Work with Engineering, Quality, Commodity and NPI to ensure success in new product development and launch.
• Manage and coordinate in earlier supplier involvement in new product introduction from part design phase through mass production, ensure critical timeline and target COSS are met.
• Ensures that Cost, Quality and Availability are achieved for product development phase and through their full life cycle.
• Manage supplier onboarding process and selection with integrity, alignment across value-chain and value engineering.
• Manage cost activities.
• Responsible in ensuring best-in-class cost, thru negotiation and/or tear down activities.
• Identifies cost drivers to influence design decision making towards target costing.
• Ensure product/module cost models and quotes are up to date at launch and effectively rolled out.
• Reviews and negotiates supplier terms and conditions exceptions to mitigate risk.
• Supports price negotiations with opportunities to drive short- and long-term cost reduction improvement.
• Builds strong, value-added relationships with suppliers, internal customers, and cross functional departments.
• Collaborates with Supplier Quality in the new supplier/component release process, including compliance and sustainability aspects.
• Partners Category team, ensuring BU product requirement and supplier technology alignment are included in building Commodity Strategy. Supporting and executing category strategy.
• Analyze lead times, identify critical paths, and prioritize demand requirements.
• Participates in project meetings/brainstorming sessions to identify solutions available.
• Performs other duties as assigned.

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

We are seeking a motivated and proactive Electrical & Electronics Engineering/ Electronics & Computer Engineering Intern to join our dynamic engineering team in Singapore. The intern will gain valuable hands-on experience in the design, development, testing, and troubleshooting of electrical and electronic systems. You will be working closely with experienced engineers and contribute to the ongoing development of projects that involve circuit design, hardware testing, and product development.

Role and Responsibiltities :

Circuit Design & Analysis: Assist in designing electrical and electronic circuits, including power supplies, analog and digital circuits.

Testing & Validation: Participate in testing prototypes, conducting experiments, and validating design specifications against real-world performance.

Hardware Prototyping: Help build and assemble prototype systems for various projects, ensuring accuracy and compliance with engineering standards.

Troubleshooting & Problem-Solving: Support the identification and resolution of issues in electrical/electronic systems, including testing components and sub-systems.

Documentation & Reporting: Assist in preparing technical documentation, test reports, and design specifications to support ongoing projects and future development efforts.

Collaboration: Work alongside with software developers/ engineer, and project managers, to develop integrated solutions.

Research & Development: Contribute to ongoing research in the field of electrical/electronics engineering, staying updated on emerging technologies and industry trends.

Ad-hoc Projects: Assist with various other engineering-related tasks, such as simulation work, software tools development, and equipment calibration.

Requirements:

Educational Background:

Currently pursuing a Diploma or a Bachelor’s degree in Electrical and Electronics Engineering, Electronics and Computer Engineering, or a related field.

Technical Skills:

Knowledge of circuit design and analysis.

Familiarity with Microsoft office e.g. Word, Excel, Powerpoint.

Basic understanding of microcontrollers (e.g., Arduino, Raspberry Pi).

Hands-on experience with oscilloscopes, multimeters, power supplies, and other lab equipment.

Understanding of embedded systems, PCB design, or power electronics.

Knowledge of industry standards and regulatory requirements for electrical systems.

Experience with CAD tools (e.g., AutoCAD ) for circuit board design is a plus.

Programming Skills:

Familiarity with programming languages (e.g., C ++, Python ).

Basic knowledge of embedded systems development is a plus.

Problem-Solving: Strong analytical and problem-solving abilities with attention to detail.

Communication Skills:

Good written and verbal communication skills to effectively collaborate within a team.

Team Player:

Ability to work in a team-oriented environment while also demonstrating initiative and independence.

Benefits:

Exposure to real-world engineering projects.

Mentorship and guidance from experienced professionals in the field.

Opportunity to develop skills in both hardware and software aspects of electrical/electronic systems.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are seeking a highly skilled Senior Software Engineer with strong Solution Architecture capabilities to lead the front-end development of our small, agile team. You will work together with a group of UX Designers and UX Engineers, ensuring that our solutions are scalable, technically sound, and compatible with cross-division systems. This hybrid role requires hands-on technical leadership, architectural oversight, and an understanding of WCAG standards and accessibility best practices. This role will be offered as a 2-year contract.

A brief summary of your job responsibility:

• Lead the UX Engineers in delivering high-quality, scalable front-end code
• Ensure that development process follows best practices for maintainability, performance, security, and accessibility
• Provide mentorship to the team, reviewing code, and helping solve technical challenges
• Evaluate cross-division systems and existing infrastructure to ensure compatibility and integration of proposed solutions
• Identify potential system limitations or risks early in the design process and work with teams to address them
• Design systems and applications with a focus on reusability and long-term maintenance
• Actively participate in coding, prototyping, and developing front-end components
• Communicate technical challenges and solutions to both technical and non-technical stakeholders
• Align technical execution with business goals, working closely with the Program Manager and other team members to meet deadlines and deliverables
• Stay up-to-date with the latest AI developments, tools, and trends, and explore ways to integrate them into development processes and products

To succeed in this role, you will ideally have:

• Strong front-end development experience to guide UX engineers
• Proven experience with solution architecture, especially in evaluating system-wide compatibility and scalability
• Ability to understand and integrate solutions across different systems, ensuring they align with organizational infrastructure.
• Proven experience leading small technical teams, with a focus on collaboration and mentorship
• Strong cross-functional collaboration skills, ensuring alignment between technical execution and business needs
• Keen interest in AI technologies and familiarity with AI tools that can be leveraged to optimize development efforts
• Experience working in agile teams, particularly in lean environments where quick iterations and adaptability are key.
• Experience working on A11Y and strong understanding of WCAG standards

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.
  

Provide excellent customer service.
Provide IT technical onsite support for end user services problem which includes identification, diagnosis, rectification and escalation.
Support on desktops, notebooks, printers, scanners hardware components.
Installation, re-installation, troubleshooting and reconfiguration of Microsoft Windows and Microsoft applications that are found in the Desktop PCs and Notebook PCs. Examples of such software are Windows 10 OS or any standard desktop OS, MS Office, Internet Explorer, MS Outlook, MS Outlook Express, etc.
Installation of Apple IPad software’s.
Provide support for queries, escalation, problem determination, resolution and MAC – move, add and change.
Printer Maintenance.
Take on and resolve complex calls or tasks the other engineers could not resolve.
Responsible for learning and working independently.
Responsible for providing excellent support and timely service

• Good to have At least a Professional Certificate, Diploma or advanced /Higher /Graduate Diploma.
• Hardware Skill – Desktop, Laptop, Printer and Scanner
• Comfortable in working Healthcare/Hospital Environment
• Windows OS (Strong Windows 10)
• Working 5.5 Days

About the role

Reporting to the BI Solutions Support Team Lead, this role will support internal stakeholders in Asia Pacific with all performance issues relating to back office BI applications, ensuring smooth operations while looking into potential process improvements.

What you will be doing

• Monitor and manage ticketing system effectively
• Perform analysis and troubleshooting of reported issues to identify root cause
• Collaborate and share knowledge with other team members to resolve issues and identify opportunities for improvement
• Prepare or update technical documents or user guides
• Participate in the enhancement and support of cyclical processes (e.g. annual budget, year opening processes)

The successful candidate

Essential

• At least a Bachelor's degree in Information Technology, Computer Science, Business Intelligence, or related field
• At least 2 years' experience in application support or similar roles
• Strong working experience in BI tools (e.g. Tableau, PowerBI)
• Working knowledge of MS SQL server and SQL scripting

Desirable

• Motivated, self-driven
• Meticulous and able to multi-task in a fast-paced environment
• Able to communicate clearly and effectively with all levels of users in English
• Open to learn and work with new technologies

What you’ll do:

• Familiar with the latest authorities’ design codes, specifications and requirements as well as submission procedures
• Responsible for project management, design coordination and contract management
• Undertake design and study of civil infrastructure work of road work, Sewerage, permanent and temporary traffic, drainage and utilities
• Able to be the design lead communicating and liaise with client and authorities while managing the team members design deliverable of drawings and reports.
• Able to liaise and coordinates with other design discipline/departments as well as managing sub consultants in preparation of drawing and reports for submission
• Able to communicate with clients and approving agencies for purposes of obtaining design information, presenting design intent and options and expediting approvals
• Able to supervise the team and carry out independent review of submission documents

We’re searching for an Infrastructure / System Engineer to be part of our diverse team of talents here at NCS!

If you believe in going above and beyond, want to exemplify the best, and wish to bring people and technology together like never before, then we would love to have a conversation with you!

Overview

We are seeking an experienced Infrastructure Engineer to join our Infra team that is providing critical operations and maintenance for an enterprise customer. The ideal candidate will have advanced expertise in VMware Virtualization, Windows Server 2016/2019, Veritas NetBackup, Red Hat Enterprise Linux (RHEL), and SAN storage. This role is essential for ensuring the stability, reliability, and performance of the customer’s IT infrastructure.

What we seek to accomplish together:

1. VMware Virtualization:

• Design, deploy, and manage VMware virtual environments.
• Perform advanced troubleshooting and optimization of virtual infrastructure.
• Ensure high availability and disaster recovery configurations for virtualized environments.
• Conduct regular health checks and performance tuning of VMware systems.
• Perform regular updates, patching, and security hardening for VMware environments.

2. Windows Server Administration:

• Manage and maintain Windows Server 2016/2019 environments.
• Perform regular updates, patching, and security hardening.
• Implement and manage Active Directory, Group Policy, DNS, and DHCP.
• Troubleshoot and resolve server related issues to ensure optimal performance.

3. Veritas NetBackup:

• Configure and manage backup and recovery solutions using Veritas NetBackup.
• Perform regular backups, restore operations, and disaster recovery testing.
• Monitor backup jobs and troubleshoot failures.
• Ensure compliance with backup policies and retention requirements.
• Perform regular updates, patching, and security hardening for Veritas NetBackup environments.

4. RHEL Administration:

• Install, configure, and maintain Red Hat Enterprise Linux servers.
• Perform system updates, patch management, and security hardening.
• Monitor system performance and troubleshoot issues.
• Automate routine tasks using shell scripting and other tools.

5. SAN Storage Management:

• Configure and manage SAN storage solutions.
• Monitor and optimize storage performance and capacity.
• Perform regular maintenance, updates, and patching of storage systems.
• Troubleshoot and resolve storage related issues to ensure data integrity and availability.

6. General Responsibilities:

• Participate in the planning and execution of infrastructure projects.
• Collaborate with crossfunctional teams to support application deployments and updates.
• Maintain detailed documentation of configurations, procedures, and operations.
• Provide 24/7 support for critical infrastructure components as part of an oncall rotation.
• Ensure compliance with company policies and regulatory requirements.

We are driven by our AEIOU beliefs—Adventure, Excellence, Integrity, Ownership, and Unity—and we seek individuals who embody these values in both their professional and personal lives. We are committed to our Impact: Valuing our clients, Growing our people, and Creating our future.  

Together, we make the extraordinary happen.  

Learn more about us at ncs.co and visit our LinkedIn career site. 

We handle all profiles with the highest level of confidentiality.

This position is ideal for a recent graduate who is passionate about solving challenging business problems and building applications that provide an excellent user experience. As a Data Engineer, you will be an integral part of the Loyalty and Marketing development team, focusing on designing and building software solutions that leverage data to solve business problems.

The role is for a self-motivated individual with strong foundational software engineering skills. The candidate will be extensively involved in hands-on activities, including POCs, design, documentation, and development of new functionality. The candidate must be flexible and willing to switch tasks based on the team's needs.

Responsibilities:

• Assist in the design, development, and implementation of software solutions.
• Participate in the development of new products iteratively by building quick POCs and converting ideas into real products.
• Design and develop mission-critical systems, delivering high-availability and performance.
• Interact with both business and technical stakeholders to deliver high-quality products and services that meet business requirements and expectations while applying the latest available tools and technology.
• Develop code under the guidance of senior developers to ensure deliverables are on time, within budget, and with good code quality.
• Maintain a passion for delivering zero-defect code and contribute to ensuring the team's deliverables meet or exceed the prescribed defect SLA.
• Assist in coordinating Continuous Integration activities and other related items in addition to contributing core product code.
• Present technical solutions, capabilities, considerations, and features in business terms. Effectively communicate status, issues, and risks in a precise and timely manner.

RESPONSIBILITIES:

• Responsible for Samsung Security Solution. Technical Support for Samsung Electronic.
• Responsible for IT Security Check

REQUIREMENTS:

• Diploma or Degree in Information Security or Information System or Computer engineering or equivalent
• Good knowledge about IT system
• Good interpersonal skills
• Passion in IT security and technology

PREFERENCE:

• Keen interest and experienced in managing enterprise-level cybersecurity solutions.
• Strong IT Technical understanding and aptitude for analytical problem solving
• Enthusiasm for problem-solving and able to work in fast-pace environment.
• Team player with high initiative, self-motivation and results-oriented mind-set
• Experienced in complex secured network design, VPN and WLAN implementation.
• Good communication, documentation, organizational and interpersonal skills
• Experience with networking, system administration and infrastructure architecture

Work location: 61 TAI SENG AVENUE PRINT MEDIA HUB @ PAYA LEBAR IPARK

Please only apply via direct application on this MyCareersFuture website.

Or, email your CV and indicate Job Title as email subject to the following: [email protected]

Only shortlisted candidates will be notified.

Responsibilities:

1. Responsible for packaging solutions and design, defining performance criteria for signal integrity (SI), power integrity (PI), and thermal performance.

2. Optimize power performance in packaging design, focusing on PI and SI parameters.

3. Manage collaboration and technical communication with packaging and testing vendors.

Requirements:

1. Bachelor’s degree or higher in Electronic Engineering, Microelectronics, Computer Science,

or a related field.

2. Minimum of 5 years of experience in packaging design and development, or experience in

project development at a design company.

3. Strong communication and coordination skills, teamwork spirit, and resilience under

pressure.

4. Proficiency in both written and spoken English and Chinese is a plus.

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 2 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call