ABOUT THE NATIONAL INSTITUTE OF EDUCATION (NIE)

The National Institute of Education (NIE), Singapore, is Singapore’s national teacher education institute, and we are proud to be an integral part of the nation’s education service. We play a key role in the preparation of teachers and in the provision of teacher professional and school leadership development programmes. We are committed to our vision of being An Institute of Distinction: Leading the Future of Education, and our mission to Inspire Learning, Transform Teaching and Advance Research. Read more about NIE here.

The National Institute of Education (NIE) invites applications for a Senior Technical Specialist in Information Technology (IT) in the Learning Sciences & Assessment (LSA) Department. This role will provide you with the experience and opportunity to work in a dynamic department with faculty members, staff and students of NIE/NTU.

Job Description

We seek a highly organized and proactive Senior Technical Specialist in IT. The successful candidate will play a crucial role in leading and managing IT operations of the LSA department along with other Technical Specialist in the department and in collaboration with ACIS, NIE’s main IT department.

Key Responsibilities

• IT laboratories management: Lead and perform maintenance and upgrading (when necessary) of department’s IT assets (approximately 100 computers and 10 commercial applications).
• IT budgeting and purchases: Propose and monitor department’s IT-related budget.
• IT laboratories support: Provide classroom support to instructors in use of IT assets and educational technology applications.
• Emerging technologies support: Provide support for emerging technologies such as artificial intelligence for education.
• Curriculum support: Support course coordinators in e-learning contents management including AI/machine learning-related course materials.
• System administration: Manage and maintain department’s virtual servers in collaboration with ACIS, NIE’s main IT office.
• Web applications: Manage and maintain department’s web applications in collaboration with ACIS, NIE’s main IT department.
• Student research administration: Manage and archive department’s students research data.

Requirements

• A University degree in Information Technology or related field.
• Minimum of 2 years IT operations or development experience.
• Knowledge or experience in AI/machine learning and programming (Javascript, Python, etc.) strongly preferred.
• Ability to work independently and proactively.
• Ability to maintain confidentiality.
• This role requires overtime support for evening classes. We are seeking a candidate who is flexible and can adapt to varying schedules as needed.

Application

We regret that only shortlisted candidates will be notified.

Other Information

NIE staff can take chartered buses at their own expense from or near their homes to the NIE campus. This is subject to availability of seats.

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Issue quotation for all Refuse Handling Equipment and & Refuse
Collection Vehicle, repair jobs.
◦ Email comprehensive maintenance quotation to customer and process renewal.
◦ Pass documents for billing to accounts department promptly.
◦ Assist maintenance and service team on documents.
◦ Reply to emails for breakdowns and repair jobs, promptly.
◦ Prepare and scan maintenance checklist monthly email to customer.
◦ Maintaining E -copies documents in the server and filing hardcopies.
◦ Prepare labour costing for accounts department, twice monthly.
◦ Update and check the maintenance schedules are completed.
◦ Coordinate with the technicians on the servicing schedules.
◦ Provide technician with details to attend emergency breakdown.
◦ Updating store on withdrawal of items under job numbers.
◦ Issue material/operation form, to purchasing department to order items, locally.
◦ Liaise with oversea suppliers for spare parts and follow up for shipment delivery.
◦ Perform ALL other service and maintenance administration for the Head of Service Department / Service Executive

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

JOB SCOPE

Responsible for executing the company projects in mechanical & electrical works in building construction which covers:

• Review project specifications and technical clarifications
• Prepare method statements and check drawing discrepancies
• Carry out project planning, design, material requisition, cost control, project supervision and documentation
• Supervise the M & E works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Ensure timely and smooth progress of works
• Ensure quality of works is achieved and safety & environmental regulations are complied with
• Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions
• Work closely with the clients, consultants, and subcontractors on technical and drawing matters
• To lead the site M&E construction team in ensuring smooth execution of work by subcontractors
• Carry out inspection of MEP works prior to concreting or subsequent construction works
• Compliance with all necessary standards, codes of practice, and safety regulations
• Oversee all related M&E issues on site

JOB REQUIREMENTS

• Minimum 3 years of experience as M&E Engineer in construction related field
• Possess a degree from universities in mechanical or electrical engineering, recognized by the Professional Engineer Board to be overall in charge of all M&E trades
• Use of Autocad/BIM Revit would be an advantage
• Proficient in using Microsoft Office
• Good communicative skills, able to interact with people of all levels and teamwork
• Contract basis
• 5.5 days working week
• Project site located at Tuas

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

• Salary up $4500
• Location: Tai Seng
• 5 Days work week

Responsibilities:

• Oversee drawing management and control of technical documentation
• Assist project manager in planning and execution of project plans at site
• To understand and design electrical drawing and single line drawings
• Carrying out tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementing preventative maintenance procedures
• Preparing service & Site Progress Reports

Requirements:

• Diploma in Engineering or equivalent
• Min 2 years of working experience in construction industry
• Knowledge in PLC is must
• Knowledge in Hydraulic System Control will be an added advantage

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1222284 | Kelvin Soh

Responsibilities:

• Coordinate and work closely with Project Manager to oversee site matters and provide technical support such as interpret construction drawings
• Ensure all technical drawings conform to the latest BCA codes and regulations
• Supervise site progress and ensure timely delivery of contract works from subcontractors/suppliers
• Manage subcontractors/suppliers to perform their respective scope of works for smooth project execution
• Conduct regular site inspections and enforce in-house regulations
• Attend site meetings to assist the Project Manager with necessary preparatory works
• Liaise with relevant government agencies to obtain necessary site permits/clearances
• Any other ad-hoc duties as instructed by superiors

Job Qualifications / Requirements:

• Possess a recognised Degree or Diploma in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management and at least 8 years of relevant working experience of the building construction industry

or

• Degree in local universities in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

Job Description

• To assist PM to plan, organise and schedule projects.
• To prepare necessary document for submission to the authority.
• To conduct pre-con site survey/inspection then collate information and prepare inspection report.
• To assist in any project administration such as vet through project contract and arrange insurance.
• To monitor material listing.
• To take charge of handover process including final site inspection and prepare completion report.

Job Requirements

• Candidate must possess at least Diploma in M&E / Electrical Engineering or equivalent qualifications.
• Candidates with no experience or fresh graduates are welcome.
• Possess leadership and positive attitude is preferred.
• Able to prepare drawing with autocad or solidworks.
• Must be responsible, time conscious, organise and meticulous.
• Possess Class 3 driving license is preferred.

Job Description:

• Support set up of machinery to ensure on-time for mass production.
• Responsible for leading machine conversions and cleaning equipment.
• Assist in immediate breakdown restoration of machine function to achieve production output.
• Perform troubleshooting and diagnostic-based troubleshooting guide.
• Conduct on-the-job training for new production operators and technicians
• Statistical process monitoring and control lead to productivity improvements.
• Support continuous improvement initiatives toward production efficiency and quality.
• Design and fabricate simple jigs/fixtures to improve production processes.
• Carry out periodical maintenance for process machinery on schedule.
• Review process issues, and internal corrective action requests, assist in a customer complaint investigation, and conduct failure analysis.
• Assist new production introduction trial run.
• Ensure customer orders are fulfilled on time in full.
• Perform reconciliation and maintain an accurate inventory of materials and finished goods.
• Consistently adhere to good housekeeping practices and safety regulations.
• Responsible for completing and countersigning GMP documentation for traceability and submitting it to Management at the end of each processed order.
• Ensure workplace safety.
• Workplace housekeeping and cleanliness.
• Any other duties and responsibilities as assigned by the management.

Job Requirements:

• Preferably at least a Diploma / Higher NITEC / NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering.
• Able to read basic engineering drawings.
• Fluent in both oral and written English.
• Knowledge of GMP will be an added advantage.
• Good communication and interpersonal skills.
• Able to support overtime and shift.
• Systematic and able to work under pressure.
• Able to work independently.

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

· Global engineering consultancy with great career opportunities

· Opportunity to work on a variety of interesting projects both locally and internationally

· Friendly working environment across the business

About SJ

Surbana Jurong Group is a diverse collective of problem solvers for the built environment, continually reimagining ways to create a smart and sustainable future.

Headquartered in Singapore, the group has a global talent pool of 16,000 in Surbana Jurong and its member companies AETOS, Atelier Ten, B+H, CHIL, KTP, Prostruct, Robert Bird Group, SAA and SMEC, based in more than 120 offices in over 40 countries.

A global engineering consulting firm who provide specialist solutions across Buildings + Cities, Infrastructure + Energy and Integrated Solutions. Its technical experts deliver sustainable solutions that cover the entire project life cycle from planning and design, through to delivery and management, as well as a full suite of multidisciplinary consultancy services across a diverse range of sectors including transportation, water, aviation, healthcare, hospitality and renewables.

Job Responsibilities

· To prepare drawings for presentation, tender documentation, variation order and relevant submission.

a) Design sketches are checked for compliance with Technical Department / Authorities

b) Timeliness of schedule for drawing activities must adhere to the norm.

c) All approved design / feedback / comments arising from checking must be incorporated in the final drawings.

d) All drawings must be prepared in accordance to ISO Manual and other statutory requirements.

e) All computer-drawing files, including BIM drawings, must be cleaned and tidied upon completion of drawings

· To process design sketches / drawings and highlight on any non-compliances prior to commencement of working drawings. - All non-compliances must be resolved within the stipulated time frame.

· To submit drawings to the relevant Technical Department / Authorities as stipulated in the timeliness of schedule of activity.

a) Time frame of submission must meet the norm.

b) Type of drawings with the endorsements, documents and numbers of sets are submitted correctly.

· To discharge other relevant works / duties that may be assigned as and when. Duties must be carried out in accordance to work requirements.

· To co-ordinate and lead a team of draughtsmen on project basis as Drafting Project Team Leader.

a) Draughtsman involved in the project, must be briefed on the scope of work in the project.

b) Drafting works are planned and distributed evenly to all draughtsmen in the team

Job Requirements

· Diploma in Architecture or Equivalent

· Experienced in tender documentation, BIM and submissions to technical agencies.

· Proficiency in AUTOCAD and BIM modelling is a MUST with ArchiCAD preferred.

· Good knowledge in Architecture design & construction.

· Passionate, Team Player and willingness to learn

· Positive work attitude, responsible with good follow-up skills

As an inclusive and growing organisation, SJ is committed to building a global community of talented professionals and thought leaders.

We recognise the value and importance of a diverse and inclusive workplace and look for people with different backgrounds, skills and expertise to drive innovation and shared learning across our growing global network.

Key Roles and Responsibilities

• Perform routine laboratory tests using both wet chemistry methods and advanced analytical instruments.
• Ensure that tests are performed in a timely manner in accordance to Standard/Official Methods, Procedures, SOPs or in-house proprietary methods.
• Perform basic calibration and maintenance of laboratory equipment.
• Maintain laboratory housekeeping and ensure it is in audit-ready state at all time

Job Expectation

• attending to urgent work activation

Skills & Experience

• ITE in Chemistry, Chemical & Life Science, Environmental Science/Engineering, Food Science, Chemical Engineering, or chemistry-related discipline
• Fresh graduates are welcome (Training provided)
• Must be self-driven, team player with initiative and good communication skill.

Benefits

• Company transport is provided
• AWS & Variable Bonus is provided
• AL & Medical Benefits is provided

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 5+ years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 8 years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Controls COE is Looking for You

Halliburton invites qualified candidates to apply for a position with the Advanced Controls Center of Excellence (COE) in Singapore. Candidates with interests and background in control systems theory, robotics, mechatronics, dynamic modeling, or data analytics and machine learning are encouraged to apply. This position provides an opportunity to participate in a strategic research and development program shaping the industry’s future technology. By solving challenging technical problems you can have a rapid impact on a commercial market with significant revenue. Successful candidates are expected to perform original and relevant research and development to expand the group’s expertise and technology portfolio. The Advanced Controls COE at Halliburton encourages a culture of continued learning, inventing, and innovating by bringing together a diverse group of top-notch engineers and researchers. The group has a track record of developing advanced control and smart systems that are used to produce value around the world every day. Our goal is to continuously grow the group’s core research expertise in the area of control, robotics, dynamic modeling, filtering, data analytics, and machine learning to build advanced automation and control technologies and maximize the value of data to ensure the long-term success of Halliburton.

Responsibilities

• Conducting research and development in modeling, control, and data analytics for solving challenging problems in the oil & gas industry
• Contributing to the identification of high value problems and opportunities
• Participating in control system design, control system prototyping, and implementation
• Design smart systems to augment complex tasks
• Collaborating with team members and providing necessary support for technology transfer
• Publishing results in patent applications, technical journals, and conferences

Required Education and Skills

• A PhD (or equivalent experience) from Mechanical Engineering, Aerospace Engineering, Computer Science, Chemical Engineering, or Electrical Engineering with a focus on Control Theory and Applications, Robotics, Mechatronics, Machine Learning, or Data Analytics.
• Skills typically acquired through the completion of an undergraduate degree in Science, Engineering or similar discipline, and 2 years of related experience. Completion of a masters or PHD in Science or Engineering is preferred
• Experience and strong interest in solving practical problems, from invention to implementation in the field
• An excellent publication and patent record consistent with experience.
• Extensive knowledge in control theory, such as modern control, adaptive control, robust control, nonlinear control, optimal control, Model Predictive Control, etc., with outstanding ability to identify the proper control method for solving practical control problems and, when necessary, to develop new control methods, and/or
• Extensive knowledge and practical experience in the application of Data Analytics including machine learning techniques such as SVM, Neuro Network, Bayes network, Genetic Algorithms, etc., preferably with control applications, and/or
• Knowledge of robotic systems with high DoF control, path planning, mechatronics, or dynamic modeling of complex systems
• Demonstrated teamwork, strong communication skills, and collaborative in complex engineering projects

Preferred Experiences

• Worked with large data sets, unstructured data, structured data and supporting compute/cloud systems like Microsoft Azure
• Built tools/workflows and support structures needed to analyze data, perform data cleaning, execute feature detection and extract business value from data
• Developed models, control algorithms, workflows, & software for use in field operations.
• Leveraged data visualization software applications, such as R, Power BI, Spotfire or Tableau

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher-level roles give (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available

Responsibilities:

• Develop and design engineering plans and construction documents for projects.
• Conduct site inspections and assessments to ensure project feasibility and adherence to regulatory standards.
• Perform calculations to assess structural integrity, safety, and sustainability.
• Manage project timelines, budgets, and resources, collaborating with contractors and local authorities.
• Oversee and provide guidance during the construction phase to ensure quality and compliance with designs and plans.
• Monitor environmental impact and ensure all designs are sustainable and eco-friendly.
• Update project records and ensure that all documentation is accurate and up to date.

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

About Us:

Metalcool Pte Ltd is a dynamic company specializing in cutting-edge solutions for industrial applications. With a strong commitment to quality, innovation, and inclusivity, we provide a supportive environment where each team member is empowered to succeed and grow. We are looking for a detail-oriented, proactive Business Support Coordinator to join our team and support our operations in a role that values accuracy, independence, and efficiency.

Job Scope:

Daily document processing - Generate delivery orders and invoices accurately, ensuring timely documentation.

Accounts receivable - Generate monthly statement of accounts and routine accounts receivable duties.

Logistics coordination - consolidate and arrange daily deliveries with third-party logistics vendors, maintaining consistency and reliability of our delivery schedules.

Order processing - Process daily orders with precision, following established procedures.

Vistor and call management - Act as the first point of contact for walk-in visitors and incoming phone calls, providing professional assistance and direction.

Document and inventory management - Maintain document filing system in line with company standards, and monitor office supplies to ensure stock availability.

Requirements:

• Proficiency in English (written and verbal) for effective communication.
• Basic knowledge of accounting or bookkeeping is required to support accounts receivable duties.
• Familiarity with Microsoft Office is essential (in particular Outlook, Teams, Word and Excel).
• Previous experience with ERP systems is beneficial.
• Strong time-management and multi-tasking skills to manage daily tasks efficiently.
• Able to work independently, following established processes with minimal supervision.

Work Environment:

The role is based in a professional office within our industrial facility, providing a comfortable workspace that is separate from our production area.