Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard

Responsibilities:

• Responsible for supporting the IT help desk services to ensure services are delivered to meet business needs and expectations, within SLA standards (response time and resolution time.
• Install and configure hardware and software applications.
• Manage user accounts, permissions, and access rights.
• Monitor and maintain IT systems to ensure their smooth functioning.
• Perform system backups and disaster recovery procedures.
• Support VOIP, conferencing and mobile service request.
• Liaise with other support teams, or product teams as required to resolve requests and issues in a timely manner.
• Act as a contact point between helpdesk operations, other teams (internal, external and vendor/supplier)
• IT assets and inventories management.
• Ensure proper documentation of all IT infrastructure setups, software licenses, and any software modifications.
• Design and conduct IT user training on systems under the IT Department's purview.

Requirements:

• Diploma in Computer Science.
• At least 5 years of MIS experience.
• Possess ITIL Certification or equivalent.
• Experience with Windows Servers, Active Directory, routers, and network switches is required.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We invite experience ICSS Engineers to consider a short term contract with one of our clients in the oil and gas marine sector. The ICSS Engineers with FPSO experience are responsible to supervise ICSS systems - software and network.

• Duties and responsibilities:
• 
  
• Ensure the technical integrity is achieved for the instrumentation & systems activities.
• Carry out functional tests.
• Prepare for a smooth hand over to Company of the instrumentation related systems & packages.
• Coordination and supervision of Field Engineers and Technicians
• Interfaces with other disciplines and third parties
• Responsible for safety, safe working practices and environmental issues in all the areas under their control.
• Maintain a comprehensive log of the activities and report progress to the E?House PCC Superintendent.
• Ensure that the works proceed in conformity with the schedule and report any deviations to the ICS Superintendent.
• Maintain & update the instrument overrides records.
• Ensuring the reliability of the ICSS system: Preventive maintenance, Performance monitoring programs, Trouble shooting and investigation of failures, standardization of design
• Requirements:
• 
  
• Engineering degree in instrumentation with PCC Background
• Minimum 5 years in Oil & Gas facility projects with significative experience in Instrumentation / Control System testing and Commissioning
• Knowledge of Instrumentation Control systems on FPSO projects required
• Excellent communication and leadership skills, handling a team of technicians.
• Problem identification & initiating changes to full implementation
• Driving HSE performance in the project execution
• ATEX experience preferred
• Instrument's Maintenance and Trouble Shooting

Job Description

• Leading and managing the service department, ensuring efficient service delivery and customer satisfaction.
• Building and maintaining solid customer relationships, understanding their needs and providing personalized service solutions.
• Developing and implementing service strategies to enhance customer experience and meet service objectives.
• Monitoring service metrics and analyzing customer feedback to identify areas for improvement and implement corrective actions.
• Hiring, training and mentoring service staff, fostering a high-performance culture and promoting professional development.
• Acting as a point of escalation for complex customer issues, demonstrating good problem-solving skills and resolving conflicts in a professional and effective manner.
• Fostering a customer-centric culture within the service team, emphasizing empathy, professionalism and effective problem-solving.
• Lead and manage the service department, including staffing, training and performance management of service personnel.
• Establish and oversee premium service standards and procedures to ensure consistent and efficient service delivery.
• Monitor and evaluate the service team’s performance, providing regular feedback, coaching and recognition to drive individual and team excellence.
• Ensure timely and accurate completion of service requests, work orders and documentation, maintaining high attention to detail and quality.
• Monitor and analyze service metrics, such as response time, resolution rate and customer satisfaction and take proactive measures to drive continuous improvement.
• Collaborate with other departments to develop and implement strategies to improve customer satisfaction, increase service efficiency and achieve business objectives.
• Prepare and present regular reports to senior management on service performance, key metrics and improvement initiatives.
• Proactively identify opportunities for service improvement, recommending and implementing process enhancements, tools or technologies.
• Stay updated on industry trends, best practices and emerging technologies in the service field, continuously seeking opportunities to enhance knowledge and skills.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

You will design, coordinate and execute electrical power related projects involving AC/DC variable speed drives, transformer, cable, generator, switchgear etc. This will include project management, engineering, procurement, construction and commissioning activities. You will also liaise with customers and vendors on all technical and commercial aspects of the project; as well as field staff on the installation, testing and commissioning.

Requirements:

• Diploma or Degree in Electrical Engineering

• Must possess a Class 3 driving licence

• Preparing and following a general maintenance schedule.
• Advising managers on cost-effective ways to perform maintenance and repairs.
• Keeping a maintenance record and filing documents, invoices, and instruction manuals.
• Keeping an inventory of maintenance tools, materials, and parts.
• Reporting urgent maintenance and repair tasks to management for approval.
• Proactively performing structural maintenance and keeping grounds neat.
• Diagnosing equipment malfunctions and performing repairs.
• Obtaining approval for purchasing maintenance tools, materials, or replacement parts.
• Supervising the maintenance team.
• Following prescribed safety regulations at all times.

• Preparing and following a general maintenance schedule.
• Advising managers on cost-effective ways to perform maintenance and repairs.
• Keeping a maintenance record and filing documents, invoices, and instruction manuals.
• Keeping an inventory of maintenance tools, materials, and parts.
• Reporting urgent maintenance and repair tasks to management for approval.
• Proactively performing structural maintenance and keeping grounds neat.
• Diagnosing equipment malfunctions and performing repairs.
• Obtaining approval for purchasing maintenance tools, materials, or replacement parts.
• Supervising the maintenance team.
• Following prescribed safety regulations at all times.

Job Description

1. Be in charge of plant operation activities, ensure that the biomass plant complies with all regulatory and safety requirements.
2. Responsible for proper supervision and execution of maintenance and overhaul of all control and instrumentation equipment
3. Assist the production manager to prepare the equipment maintenance plan within the jurisdiction, do a good job in maintenance management and be responsible for the on-site management of equipment maintenance and technical transformation projects.
4. Responsible for the technical training of maintenance, formulate training plans and goals, organize regular assessments and continuously improve the technical level of operating personnel.
5. Responsible for the implementation of technical innovation and other plans in maintenance.
6. Responsible for the deployment of personnel and materials during equipment maintenance, timely inspection and resolution of existing problems during maintenance, and ensuring the quality and progress of maintenance. After equipment maintenance, cooperate with the production department to complete equipment acceptance work.
7. Establish and construct a complete equipment ledger, cost accounting, control maintenance costs, reduce consumption quotas, improve maintenance efficiency, and ensure production operations.
8. Attend to equipment breakdown, review and define the repair procedure with operation
9. Carry out corrective and preventive maintenance in accordance to the work instruction and procedures
10. Any other duties and responsibilities to be assisgned by Superior and Management from time to time within the JE Group

Job Requirements

1. Bachelor of Electrical / Electronics / Mechanical / Mechatronic Engineering
2. Diploma in Engineering with at least 3 years of equipment maintenance experience will be considered
3. Min 3 years of relevant experience working as plant operations Engineer
4. Hands on experience on instrument calibration and DCS/PLC modification
5. Possess analytical thinking and have the ability to work under pressure
6. Experience in Power Plant industry is an advantage
7. Able perform 12-hours Rotating Shift including weekends and public holidays
8. Working Location: Tuas South Avenue 2

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Strong analytical skills.

· Able to work under pressure with good time management skill.

· Fresh graduates with good engineering fundamentals and passions for civil & structural engineering may apply.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Role & Responsibilites

• Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.
• This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.
• To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.
• Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.
• Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.
• Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.
• Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.
• Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.
• Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Establishes networking environment by designing system configuration, directing system installation, defining, documenting, and enforcing system standards
• Maximizes network performance and optimization by monitoring performance, troubleshooting network problems and scheduling upgrades when necessary
• Oversee maintenance of all IT system in line with IT security policy
• Secures network system by establishing and enforcing policies, defining and monitoring access
• Ensure project tasks are completed on time and project goals are achieved

Relevant experience:

• Minimum 3 years of experience in IT support

Basic skills required:

• Diploma / Bachelor degree in IT related field or equivalent
• Knowledge on Server/Cloud Technology (e.g. AWS, Virtual Machines, etc)
• Knowledge on LAN/WAN networking, network design, problem solving, network hardware configuration and project management
• Responsible resourceful, customer oriented and an independent player

R&D Engineer II for the product development of door hardware products. (i.e. door closers and floor springs). An experienced professional responsible for leading and executing entire product development cycles, from new concept design generation, concept and feasibility evaluation, detailed design to prototyping and testing until series production :

Main Responsibilities :

• Develops and manages new designs in accordance with project requirements and objectives, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.

Job Descriptions

• To do up products specifications for main contractors, architects, Consultants
• Establish Communicative Business Relationship With Prospective Clients at long term.
• Be the account manager for the projects

Job Requirements

• Candidate must possess at least a Diploma & Above, preferably construction related.
• Self Confidence, strong analytical mind, able to communicate with various professionals and different site personnel, friendly, team player & target oriented.
• Possess own car
• Required skill(s): MS Excel, MS Powerpoint, MS Word.
• At least 2 year(s) of working experience in the related field is required for this position.
• At least Project based type Sales Experience
• Handling Specifications

Benefits

• $600 transport allowance
• Can claim home season parking, parking fees and ERP charges pertaining to work can be claimed on reimbursement basis.
• Petrol Fleet card given
• Company mobile line, phone and laptop will be provided
• Annual leave starts from 10 days
• Entitled to quarterly profit sharing, have quarter sales target which set by HQ and once they exceed the sales target, they will have the profit sharing on the excess amount. Personal target will be set by HOD, once hit then is eligible for the profit-sharing pool. Team work is important.

Working hours

• Mon-Fri, 5days work week
• 8.30-18.00

· Familiar with TS16949 and APQP process

· Maximize project efficiency and control budget

· Review and approve DFM with mold maker and customer

· Prepare time line and adhere to project schedule

· Prepare required machine capacity, jig and fixtures

· Work with team members to ensure adherence to schedule

· Communicate and update customers on progress of the project

· Arrange layout and process flow

· Develop inspection and testing protocol for monitoring project performance

· Manage compliance with standards and specifications for quality control and assurance

Requirements:

· Diploma/Degree in Engineering or related field

· At least 2 years automotive experience in a mid-size molding company

· Familiar with design software

· Hired permanently as an employee in Singapore and willing to work in Mexico with expatriate package

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected]. Please indicate the position you are applying in your email subject.

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

Detailed JD (Roles and Responsibilities)

AI/ML engineer role - Implement model training and serving pipelines at scale (GPU), model API, containerization – Python / Scikit-learn / Pytorch / Tensorflow / LLM Hugging Face / Azure ML / Azure AI / (optional) Databricks / MLOps (CI/CD, Versionning, Artifact repo, Logging etc.)

Mandatory skills

Python / Scikit-learn / Pytorch / Tensorflow / LLM Hugging Face / Azure ML / Azure AI / MLOps

Desired/ Secondary skills

(optional) Databricks

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope of Responsibilities:

• Ensure the correct application of the ‘HSE by Design’ Reviews across the project and ensure any significant risks or major non-compliances are addressed.

• Coordinate HSE aspects of all design work and cooperate with others involved with the project.

• Support the design team in respect of design coordination and the identification, elimination, reduction and recording of residual risks.

• Support the design team in undertaking process hazard analysis and ensure all outcomes are recorded and actioned through the design process.

• Support the design team in conducting ‘HSE by Design’ risk reviews, layers of protection analysis, consequence analysis throughout project life cycle.

• Ensure that any residual risks identified from the detailed design phase are recorded on the risk register communicated and that full information is provided for Commissioning and Start-Up HSE Plan

• Ensure that contractors with design responsibilities fulfil their roles, to eliminate, mitigate or control

risk identified as residual risks during detailed design phase.

• Lead prestart-up safety reviews with all stakeholders and ensure all outcomes are recorded and actioned before handing over to operations.

• Support incident investigation of process-related safety and environmental-related incidents and manage it through incident recording and tracking program.

* Responsible for achieving sales targets and providing technical support to our customers.

Requirements :

* Diploma or ITC / NTC2 in Mechanical / Electrical or Marine Engineering

* Entry-Level graduates may apply

* Sales and product training will be provided

* Excellent interpersonal, communication & negotiation skills

* Must possess Class 3 licence and own a car

Responsibilities

· Assembly of Electrical control panels/junction boxes according to pecifications and standard operation

procedures

· Perform inspection and electrical functions testing on panel/case

· To carry out troubleshooting on electrical switchboard and generator service report

· Have knowledge on CCTV system, door access system, fire alarm system and telephone system

· Correctly using hand tools and test equipment to be able to determine the main cause of all electrical problems.

· Properly connect wires to transformers, circuit breakers and other electrical components.

· Inspecting electrical equipment, systems and components to be able to identify any defects, hazards, or a need

for repair and adjustment.

· Handle ad-hoc work assigned by superior

Requirements

. With relevant working experience as a electrical technician in switchboards and power distribution

· With relevant working experience in electrical role

· At least NTC/NITEC or Diploma in Electrical Engineering

· Possess good communication and interpersonal skills

· Pleasant personality and possess good working attitude

· Able to work independently with good problem solving skills and team player

Detailed JD (Roles and Responsibilities)

AI/ML engineer role - Implement model training and serving pipelines at scale (GPU), model API, containerization – Python / Scikit-learn / Pytorch / Tensorflow / LLM Hugging Face / Azure ML / Azure AI / (optional) Databricks / MLOps (CI/CD, Versionning, Artifact repo, Logging etc.)

Mandatory skills

Python / Scikit-learn / Pytorch / Tensorflow / LLM Hugging Face / Azure ML / Azure AI / MLOps

Desired/ Secondary skills

(optional) Databricks

Job Responsibilities:

Ø Conducting and overseeing maintenance process audits

Ø Must have rotating equipment service maintenance experience in Process industry

Ø Conducting and overseeing maintenance process audits

Ø Procuring, testing and commissioning specialist components, fixtures or fittings

Ø Supervise the maintenance of production and electrical equipment

Ø Maintain the facilities maintenance schedule

Ø Ensure all equipment is properly maintained

Ø Review daily work orders and provide reports

Ø Lead, train and supervise maintenance workers

Requirements:

Ø Must possess excellent client-facing and internal communication skills

Ø Ability to work with multiple discipline projects

Ø Developing specifications for the project's needed equipment.

Ø Excellent interpersonal, written and oral communication skills.

Ø Quick learner with positive attitude.

Ø Wiling to work at site full time as when needed.

Ø Wiling to relocate based on customer sites requirements.

Ø Strong organizational, interpersonal, problem solving and analytical skills.

Ø Ability to work independently with minimal supervision.

Ø Candidate must have at least a NTC or Diploma degree.

Ø Minimum 5 to 10 years of experience in related operations