Job Description :

• Test program Development for Digital, Power Management , RF & Mixed Signal Integrated Circuits (IC’s) using Automated Test Equipment (ATE) for wafer sort and packaged IC’s
• Design Test Hardware Load board and Probe Card
• Work closely with the design engineers on the first silicon debug, device
  characterization, test program bring up and production release activities
• Debug of digital test patterns and Device characterization across PVT (Process, Voltage and Temperature)
• Involve on test program hand on, production release, yield improvement and test time reduction
• Operation of Automatic Wafer Prober, Test Handler
• High level of collaboration and interaction with different Hardware, Product
• Engineering, Design Engineering, Quality Engineering, and Foundry Engineering teams

Job Requirements:

• Minimum Degree in Electronics / Electrical Engineering , or Candidates with minimum, 2 years of experience
• Good Knowledge of Digital and Analog electronics, able to write scripts using Python is desired.
• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment .
• Strong verbal and written communication skills and able to work independently
• Result oriented and willingness to learn
• Selected candidates will be undergoing a training of six months and will be signing up for a contract of eighteen months after confirmation (Training period inclusive).

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job description

(A) Primary Function

1. Responsible for all automation related activities of the product.

2. Responsible for the Maintenance and Repair of production automated machines.

3. Continuous to enhance quality and productivity through automated processes

4. Identify and initiate actions to prevent occurrence and recurrence of product, process, quality systems nonconformities

(B) Duties and Responsibilities

1. Optimise automation parameters and meeting specific cycle time for existing and new products.

2. To provide timely support to ensure efficiency of production machines & equipments are met.

3. To work with respective department on product quality issues.

4. Initiate containment plan and implement effective long term plan on quality related issues

5. Attend to all daily quality and process related issues.

6. Execute process validation for new and existing products with tooling and quality personnel.

7. Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.

8. Perform internal quality system audit.

9. Train and assess production staff on processes and product where applicable.

10. Attend routine production and quality meetings

11. Execute engineering change notice from customer.

12. Analyze quality data collected periodically and provide recommendation to management for improvement

13. Compliance to all regulatory and in house system requirements especially for medical and automotive customers

14. Perform additional tasks given by the management

Qualifications / Requirements

1. Degree/Diploma in Engineering-related discipline, preferably Mechatronics

2. Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA

3. Results-oriented, meticulous and a self-motivated team player

Job Summary:

The Mechanical Engineer is responsible for assisting in providing innovative and cost-effective solutions requiring the development or sustaining of new or improved techniques, procedures or products. The Mechanical Engineer also assist in planning, conducting and evaluating approaches to meeting the project objectives in a timely fashion.

Relationships:

Direct Supervisor: Project Team Lead or Supervised by Senior Engineer.

Essential Responsibilities and Duties:

• Design component and assembly with CAD software. Prepare engineering drawings and engineering bill of material.
• Assist in identifying and organizing requirements. Apply relevant usability procedures and principles.
• Analyse, design, develop, maintain products and assist in their commercialization.
• Build prototypes, products and systems suitable for testing. Set up and run lab simulations. Design and implement tests, document results and develop customer presentations. Provide timely corrective actions on defects.
• Produce analyses and mathematical models and draw design conclusions based on those.
• Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts. Contribute to design standards and support design re-use.
• Create and maintain product documentation. Provide support to field and customers through InTouch. Provide user training as required.
• Assign, direct and review work of technicians and provide guidance to engineers. With seniority, mentor junior engineers.
• Continually evaluate engineering approaches and risks.
• Author technical reports, papers, articles, patents and presentations. Share expertise via Eureka and special interest groups. Expand informal network throughout the organization.
• Keep abreast of novel technical concepts and markets. Adopt new practices readily to develop innovative and low-cost products.
• Maintain familiarity with company technology, organization and business.

Key Competencies:

• Electromechanical Design
• Mechanical System Design
• Hydraulics system design
• Manufacturing Technology
• Material Selection
• Product Maintainability
• Product Reliability
• Simulation and Modelling
• Stress and Strain analysis and analytical calculations
• Testing
• AutoCAD and 3D design are the basic knowledge. Most preferably already familiar with ProE/Creo, Solidworks, CATIA, NX or similar CAD.
• Able to perform FEA simulation
• Able to visualize and realize a design from conceptual descriptions
• Understanding of Windchill and CFD is an advantage
• Turbines and pumps design knowledge is an advantage

Behavior:

• Good communication skills (written and oral)
• Ability to contribute independently
• Quality and detail oriented
• Ability to work in a fast paced environment

Experiences and Competencies:

• Bachelor, MS or Ph.D degree. in Mechanical Engineering or in related field.
• 2-3 years of experience working in engineering is preferred, fresh graduate will be considered.
• Knowledge in fluid dynamics, centrifugal pump, experience in product design and development is preferred.
• Exceptional technical and problem-solving skills. Hands-on is required.

JOB SUMMARY

Duties include generating PCR and engineering drawing and exploring alternate solution to solve resource or production constrain. He is also responsible to plan, organize and manage assigned project activities. This requires direct interaction with customer, vendors and functional departments to monitor and ascertaining all jobs are progressing within schedule and meeting deadline.

RESPONSIBILITIES & DUTIES

• Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production Supervisor to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Familiar with various laser systems as well as advance welding/cladding technique.
• Experience in robot programming for welding/laser cladding.
• Perform other assignment and duties as and when required.

ACCOUNTABILITIES

• Ensure on time issuance of PCR and drawings and correctness.
• Ensure all projects are on schedule and completed on time.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.

QUALIFICATION & EXPERIENCE

• Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.
• Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

Requirements:

· At least 5 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

Job Description

· Monitor the machines and company equipments operational performance and condition

· Conduct preventive maintenance to machine and company equipments as per schedule

· Review and update all existing machine maintenance documents

· Prepare and design the spare parts for machines and company equipments

· Report any unsafe conditions and practices to Production Manager

· Assist of production and purchasing department of manufacturing / purchasing spare parts

· Monitor spare parts stock level and raising purchase order

· Involve in the implementation and continuous maintenance of HSE Management System

· Perform any other duties assigned by the Production Manager

Job Requirements

Knowledge of precision machining machineries, equipment and facilities

Knowledge of repair and maintenance on machineries and equipment

Knowledge of Environment, Health & Safety

Diploma in Mechanical, Electrical or Mechatronic Engineering

5 years experience in machine repair and maintenance

Job Descriptions:

* Site coordination, Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Involve in Project planning, electrical & control, instrumentation / sensor, programming, Testing and Commissioning, Service and Maintennace, Documentation and Training

* Experience in AutoCAD drawing or equivalent will be added advantages

* Ad-hoc engineering support when required.

* Willing to work on fast pace environment.

* Willingness for standby duties or work after office hour or during weekend / Public Holiday

Job Requirements:

* Relevant graduate diploma for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance.

* Fresh graduates are welcome.

* Hands on experience in automation system implementation and support.

* Experience in programming, site coordination and support

* Electrical, instrumentations and control knowledge

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

Build a career with confidence

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

Role Responsibilities

• Assist in technical proposal, understand of requirements, perform selection or co-ordinate with factory for technical solution.
• Keep Up-to-Date project status, such as drawing submission, delivery schedule, payment etc.
• Identify and mitigate project risks and liabilities.
• Organize meeting with project stakeholders.
• Actively follow up / liaise with vendors/customer to resolve issue.
• Co-ordinate & follow up with factory for equipment delivery.
• Perform shipment inspection/check, identify any punch if any.
• Attend factory test (local & overseas).
• Participate trade show, exhibition for networking and building customer relationship.

Minimum Requirements

• Min Diploma in Mechanical, or Electrical, Mechatronic, Marine engineering.
• Knowledge in Marine HVAC.
• Familiar with AutoCAD.
• Customer Management & Problem-Solving Skills.
• MS office experience.

Benefits

We are committed to offering competitive benefits programs for all of our employees and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

Requirements:

· At least 5 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

• Carry out planned inspection, maintenance & servicing of production machinery & equipment.
• Perform in-house troubleshooting, repairs and overhauls of fruits packing / packaging & food processing machinery & equipment including changing of parts.
• Independently find the best possible solutions to fix machinery / equipment breakdowns to minimize production lost time. Senior colleagues will be available for support when needed.
• Perform Calibration, Installation, Commissioning of new packing / packaging machinery / equipment
• Conduct proper technical & operation of machinery / equipment training to operators.
• Maintain machinery and equipment common spare parts inventory at a safety level.
• Keep track of maintenance service agreement renewal with customers

Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous

Who You Are

You are a self-motivated team player with the ability to easily network in an international and cross-cultural environment, working in line with Alfa Laval drivers; Action, Interaction, and Satisfaction. You are driven and see solutions rather than problems, effectively prioritizing and executing tasks. A focus on continuous improvement is in your DNA. You build trust, by clear communication with no prestige.

If the above sounds like you, this position might be just what you’re looking for!

About The Job

Help customers with technical operating issues by carrying out troubleshooting and field service requests submitted through the International Marine Service Desk. The International Service Engineers for Water, Wind & Fuel Systems will provide technical support for the Alfa Laval Boiler System.

Job Description

Follow to all safety procedures and promptly report any unsafe practices or incidents.

• Perform planned service, commissioning, and troubleshooting for Alfa Laval systems on board vessels, including Ballast Water Treatment (PureBallast), High-Speed Separators (HSS), Fuel Conditioning Modules (FCM), Freshwater Generators (FWG), and other equipment.
• Prepare for service jobs by following the Standard Operating Procedures (SOP) to ensure efficient execution.
• Travel domestically and internationally to service jobs on board vessels, with the potential to sail with the vessel if required.
• Execute maintenance, repair, advanced troubleshooting, commissioning or other related services onboard.
• Communicate effectively with customers in English to ensure clear understanding and satisfaction.
• Document all work performed, and conclusions drawn while on board, and ensure that service reports are signed by the customer.
• Identify potential improvements, including sales leads, and provide advice to customers, passing relevant information to the organization.
• Contribute to the development and improvement of Standard Operating Procedures (SOPs).
• Provide formal training to peers and customers, assist in developing of training material and content.
• Proactively seek central support through ServiceNow or direct networking contacts and share findings with the team to keep colleagues informed.
• Be available to respond to emergency service requests, providing timely technical support to minimize vessel downtime.

Main Competencies

Decisiveness & Execution

• Be solution driven and focus on achieving results and ensure that key objectives are met.
• Take responsibility for actions with a ‘can-do’ attitude.
• Influence events actively and make tough decisions when required.
• Identify urgent decisions and make decisions under pressure.
• Take calculated risks on the basis of adequate information and analysis.

Customer focus

• Put the customers first and be eager to please them in line with company standards.
• Go out of the way to ensure that individual customer needs are met.

What You Know

• High school diploma or higher, bachelor’s degree or similar in Marine Engineering a plus.
• 5+ years field service experience on board vessels familiarity with industry regulations and standards, as well as marine mechanical and electrical systems.
• Fluent in English, both verbal and written.
• Good cross-cultural communication skills.
• Experience from working in an international context and across borders with colleagues and customers from other cultures.
• Good reporting skills. (using MS Word and Excel)
• Experience of working in CRM systems and planning tools.
• Understanding of marine separators, ballast treatment systems with electrical, mechanical and automation knowledge.

What’s In It For You

We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval’s future success.

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Masstron Pte Ltd is a dynamic and innovative company committed to excellence in production and quality assurance. We are seeking a dedicated and detail-oriented Assistant QA/QC Engineer to join our team and contribute to our commitment to delivering top-notch products and services.

Job Description:As an Assistant QA/QC Engineer, you will play a crucial role in ensuring the quality and compliance of our products throughout the production assembly phase. You will assist the QA/QC Manager with progressive quality checks, final inspections, and work closely with our customers' quality teams for factory acceptance tests and handover processes. Your responsibilities will also include fronting customer audits and implementing robust quality management systems within the company.

Key Responsibilities:

• Assist the QA/QC Manager in conducting progressive quality checks during the production assembly phase.
• Perform final quality checks before product delivery.
• Collaborate with customer quality teams for factory acceptance tests and handover tests.
• Front customer audits and address any quality-related concerns.
• Implement and maintain quality management systems to ensure compliance with industry standards.
• Conduct root cause analysis and develop corrective actions for quality issues.
• Prepare and maintain quality documentation, reports, and records.
• Provide training and support to production staff on quality standards and best practices.
• Stay updated on industry trends and regulatory requirements to continuously improve quality processes.

Requirements:

• Diploma in Engineering, Quality Assurance, or a related field.
• Strong knowledge of quality control standards and methodologies.
• Excellent problem-solving skills and attention to detail.
• Ability to work collaboratively with cross-functional teams.
• Strong communication and interpersonal skills.
• Proficiency in using quality inspection tools and software.

What We Offer:

• Opportunities for professional development and growth.
• A supportive and collaborative work environment.
• The chance to make a significant impact on our company's success.

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days.

Job Description:

The Prototype Machine Project Engineer is responsible for overseeing the entire process of building new prototype machines, from initial design transfer to final production handoff. This role requires managing various aspects of the project, including material procurement, troubleshooting, and team supervision, to ensure that prototypes are met the required quality standards, completed on schedule, and transfer efficiently to production.

You will work closely with R&D, technicians, and the quality control (QC) department to ensure a smooth transition from design to prototype and ultimately to full-scale production. Additionally, the role involves monitoring material costs and ensuring effective collaboration between teams.

This position requires strong project management skills, technical expertise in prototyping and manufacturing processes, and the ability to coordinate cross-functional teams to achieve project goals.

Responsibilities:

• Manage material delivery before prototype
• Diagnose and troubleshoot prototype machine
• Manage material cost for prototype and production
• Transfer R&D design to prototype
• Supervise Technicians during Assembly
• Transfer Completed Prototypes to Production

Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or Equivalent
• At least 2 years of experience in project management, preferably in a machine tool company or engineering environment.
• Proficient in Microsoft Word, Excel and PowerPoint
• Work Independently and ability to diagnose and resolve problems.
• Hands-on experience with machine.
• Good time management, pro-active, self-motivated and high sense of responsibility.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Info:

• Salary: Basic up to $3500 + AWS + VB
• Working Hours: Monday - Friday (8:30am - 5:30pm)
• Location: Jurong East

Job Scope:

• To research and develop new products and services
• Research competitors' products and evaluate their detailed functions
• Conduct market research on security systems in the ASEAN region
• Collaborate with Japan HQ R&D and China R&D center for product development
• Survey existing and future infrastructure, including electrical power and telecom networks, to ensure product compatibility
• Provide field technical support by visiting clients to check and maintain CCTV surveillance systems
• Assist in obtaining technical certifications for new and existing products in various countries
• Design and develop test plans for security alarm systems, CCTV systems, and access control systems, adhering to industry standards
• Perform rigorous testing of system components such as control panels, sensors, cameras, access readers, and communication devices
• Simulate real-world security scenarios to identify and address potential vulnerabilities
• Maintain detailed test records and reports for future reference
• Analyze test results, troubleshoot system malfunctions, and document findings
• Collaborate with manufacturers or distributors to resolve issues and optimize system performance
• Provide technical support to internal teams across the ASEAN region
• Conduct in-depth research on emerging security technologies and their potential applications
• Analyze market trends and customer needs to identify opportunities for new product development
• Research standards like SS558, EN, and IEC for ASEAN countries
• Stay updated on the latest advancements in security technologies and testing methodologies

Requirements:

• Minimum qualification Diploma in Electronics
• Minimum of 2 years of experience in security system testing, preferably with exposure to alarm systems, CCTV systems, and access control systems
• Familiarity with testing methodologies and tools used in security system evaluation
• Strong understanding of electronic security principles and operation of various security system components
• Proficiency in basic IT knowledge is required
• Proficiency in technical documentation and reporting
• Ability to conduct presentation for internal customers and management
• Entry level with relevant internship experience is welcome

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Supporting the Mechanical Maintenance team, you will be responsible for carrying out maintenance works in a safe, efficient and timely manner in accordance with maintenance strategy, to meet planned schedule requirements.

Responsibilities

• Perform preventive maintenance to ensure that plant equipment and auxiliary systems continue to operate smoothly and efficiently
• Perform repair or replacement of defective or malfunctioning components of machinery and equipment
• Assist with the monitoring of contractors involved in maintenance on site and maintain asset maintenance plans
• Attend to work orders allocated by Mechanical Engineers
• Perform other duties as assigned

Requirements:

• Diploma in Mechanical Engineering or equivalent
• Preferably 3 years of relevant experience in Power Plants or related industries will be advantageous
• Self-driven, with a good working attitude, and a good team player.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

We are looking for a Plant & Machinery (Mechanical / Electrical) Engineer for:

Metal shredder & non – ferrous separation / Vezanni Shear

Waste Wood To Energy Plant

Responsibilities:

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Ensure equipment documentation and Preventive Maintenance (PM) procedure are constantly updated.
• Ensure technical, environmental and safety aspects in all matters is assessed in compliance with Health and Safety regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): Mandarin, English (in order to liaise with the Mandarin speaking associates)
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC system, Conveyor belts
• Preferably Senior Executive specialized in Engineering - Mechanical/Automotive or equivalent.

Job Description:

1. Design, build, and deploy back/front end software applications using C# and Typescript (or JS).
2. Employ LINQ for data interaction and process optimization.
3. Oversee Microsoft SQL databases, carry out SQL programming tasks, and enhance system performance.
4. Engage in all stages of the Software Development Life Cycle (SDLC), including requirement gathering, design, coding, testing, deployment, and maintenance.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers

Requirements:

• Bachelor’s Degree in Computer Science, Information Technology or Mechatronics or equivalent
• Demonstrable experience (at least 2 years) in software development.
• Profound knowledge of C#, LINQ, and Angular. Experience with Microsoft SQL database programming using Entity Framework & SignalR.
• Acquaintance with the Software Development Life Cycle (SDLC).
• Familiarity with OPC-UA and Industrial 4.0 technologies is advantageous.
• Exceptional problem-solving abilities and meticulous attention to detail.
• Excellent communication skills and a strong team player.